a student holds a laser that emits light of wavelength 638.5 nm. the laser beam passes though a pair of slits separated by 0.500 mm, in a glass plate attached to the front of the laser. the beam then falls perpendicularly on a screen, creating an interference pattern on it. the student begins to walk directly toward the screen at 3.00 m/s. the central maximum on the screen is stationary. find the speed of the 50th-order maxima on the screen.

Answers

Answer 1

The position and speed of the 50th-order maximum is 4.77 x [tex]10^{-4[/tex] mm from the left edge of the screen.  

First, we need to calculate the wavelength of the light emitted by the laser. Since the wavelength is given as 638.5 nm, we can use the formula:

λ = c/f

We are given that the laser emits light of frequency f. Since the wavelength is λ and the speed of light is c, we can solve for f:

f = c/λ

Substituting the given value for λ (638.5 nm), we get:

f = 3 x [tex]10^{-4[/tex]  m/s / 638.5 x [tex]10^{-4[/tex]  m

f = 4.77 x [tex]10^{-4[/tex]  Hz

Therefore, the frequency of the light emitted by the laser is 4.77 x 10^14 Hz.

Next, we need to calculate the distance between the slits and the screen. We are given that the distance between the slits is 0.500 mm. To find the distance from the slits to the screen, we can use the formula:

d = h * sin(θ)

Since the light is incident on the screen perpendicular to the slits, the angle between the incident ray and the normal to the slit is 90°. Therefore, we can use the value of θ as 90°.

The height of the slits is given as 0.500 mm. Therefore, we can substitute these values into the formula to find the distance from the slits to the screen:

d = 0.500 mm * sin(90°)

d = 0.500 mm * 1

d = 0.500 mm

Therefore, the distance from the slits to the screen is 0.500 mm.

Finally, we can use the equation for the central maximum in an interference pattern to find the position of the 50th-order maximum. The equation for the central maximum is:

M = m * L / (N + L)

Since the light is incident on the screen perpendicular to the slits, the distance between the central maximum and the screen is equal to the distance between the screen and the center of the central maximum. Therefore, we can substitute this value into the equation for the central maximum:

M = m * L / (N + L)

M = 0.500 mm / (0.250 mm + 0.500 mm)

M = 2.00

Therefore, the position of the central maximum is 2.00 mm from the left edge of the screen.

To find the position of the 50th-order maximum, we can use the equation for the position of a maximum in a sinusoidal wave:

x = (2n + 1)πm / λ

x = (2n + 1)π(2.00) / (638.5 x [tex]10^{-4[/tex] )

x = (2n + 1)π2.00 / (638.5 x [tex]10^{-4[/tex] )

x = 4.77 x[tex]10^{-4[/tex]

Therefore, The position of the 50th-order maximum is 4.77 x [tex]10^{-4[/tex]  mm from the left edge of the screen.  

Learn more about speed Visit: brainly.com/question/13943409

#SPJ4


Related Questions

In a region of space there is an electric field 'E' that is in the z-direction and that has magnitude E = (747 N/(C*m))x. Find the flux for this field through a square in the xy-plane at z = 0 and with side length 0.370m . One side of the square is along the +x -axis and another side is along the +y-axis.

Answers

The flux through each side is zero, the total flux through the square is also zero. Therefore, the electric field does not pass through the square in the xy-plane at z = 0.

The flux of an electric field through a surface is given by the dot product of the electric field and the surface area vector. In this case, the electric field E is in the z-direction, so it does not contribute to the flux through the xy-plane. Therefore, we only need to consider the flux through the sides of the square that are perpendicular to the z-axis. These sides are along the +x and +y axes and have length 0.370m each.

The surface area vector for the +x side is (0.370m) * (0m) * (+1), and for the +y side it is (0m) * (0.370m) * (+1). The dot product of the electric field E and the surface area vector for each side gives:

For the +x side: (747 N/(C*m))x * (0.370m) * (0m) * (+1) = 0

For the +y side: (747 N/(C*m))x * (0m) * (0.370m) * (+1) = 0

Since the flux through each side is zero, the total flux through the square is also zero. Therefore, the electric field does not pass through the square in the xy-plane at z = 0.

To know more about  flux visit:

brainly.com/question/14527109

#SPJ11

A 0. 260 kg particle moves along an x axis according to x(t) = -13. 00 + 2. 00t + 2. 00t2 - 6. 00t3, with x in meters and t in seconds. In unit-vector notation, what is the net force acting on the particle at t = 3. 40 s ? Give an expression for the (a) x, (b) y, and (c) z components

Answers

A 0. 260 kg particle moves along an x axis according to x(t) = -13. 00 + 2. 00t + 2. 00t2 - 6. 00t3, with x in meters and t in seconds.the net force acting on the particle at t = 3.40 s can be expressed as:

F_net = (ma)x(t)î

To find the net force acting on the particle at t = 3.40 s, we need to differentiate the position function x(t) with respect to time to obtain the velocity and acceleration functions. Then, we can multiply the mass of the particle to the acceleration to obtain the net force.

Given:

[tex]x(t) = -13.00 + 2.00t + 2.00t^2 - 6.00t^3[/tex]

(a) To find the x-component of the net force, we differentiate x(t) with respect to time (t):

[tex]v(t)= dx/dt = 2.00 + 4.00t - 18.00t^2[/tex]

Next, we differentiate the velocity function to obtain the acceleration:

a(t) = dv/dt = 4.00 - 36.00t

(b) The y-component of the net force is zero because there is no y-component present in the given position function.

(c) Similarly, the z-component of the net force is also zero because there is no z-component present in the given position function.

Therefore, the net force acting on the particle at t = 3.40 s can be expressed as:

F_net = (ma)x(t)î

where (ma)x(t) is the mass of the particle multiplied by the x-component of the acceleration.

It's worth noting that without additional information regarding the mass of the particle, we cannot determine the numerical value of the net force. However, the expression provided gives the general form of the net force acting on the particle at t = 3.40 s based on the given position function.

Learn more about force here:

https://brainly.com/question/30507236

#SPJ11

light of wavelength 610 nm illuminates a diffraction grating. the second-order maximum is at angle 36.5∘.

Answers

When the light wavelength is 610 nm and the second-order maximum is at an angle of 36.5°, the diffraction grating has approximately 962 lines per millimeter.

To determine the number of lines per millimeter on the diffraction grating, we need to use the formula for the diffraction of light through a grating. This formula is given by:

d(sin θ) = mλ

where d is the spacing between the lines on the grating, θ is the angle of diffraction, m is the order of the diffraction maximum (in this case, m = 2 for the second-order maximum), and λ is the wavelength of the light. In this problem, we are given that the wavelength of the light is 610 nm and the angle of diffraction for the second-order maximum is 36.5°.

Plugging these values into the formula, we get:

d(sin 36.5°) = 2(610 nm)

Solving for d, we get:

d = (2 x 610 nm) / sin 36.5° d ≈ 1.04 μm

Finally, we can calculate the number of lines per millimeter by taking the reciprocal of d and multiplying by 1000:

lines per mm = 1 / (1.04 μm) x 1000 lines per mm ≈ 962

As the question is incomplete, the complete question is "Light of wavelength 610 nm illuminates a diffraction grating. the second-order maximum is at an angle of 36.5°.  How many lines per millimeter does this grating have? "

You can learn more about wavelength at: brainly.com/question/31143857

#SPJ11

an electromagnetic wave in vacuum has an electric field amplitude of 365 v/m. calculate the amplitude of the corresponding magnetic field. nt

Answers

The relationship between the electric field (E) and magnetic field (B) amplitudes in an electromagnetic wave is given by:

B = E / c

where c is the speed of light in vacuum, approximately equal to 3.00 x 10^8 meters per second.

Given that the electric field amplitude (E) is 365 V/m, we can calculate the corresponding magnetic field amplitude (B) as follows:

B = E / c

B = 365 V/m / (3.00 x 10^8 m/s)

Calculating the numerical value:

B ≈ 1.22 x 10^-6 T (tesla)

Therefore, the amplitude of the corresponding magnetic field is approximately 1.22 x 10^-6 T.

Learn more about **electromagnetic waves** and their properties here:

https://brainly.com/question/30289624?referrer=searchResults

#SPJ11

the maximum gauge pressure in a hydraulic lift is 17 atm. if the hydraulic can lift a maximum 8730 kg of mass, what must be the diameter of the output line in (a) meter, b) cm, and c) inch ?

Answers

The diameter of the output line of a hydraulic lift that can generate a maximum gauge pressure of 17 atm and lift a maximum mass of 8730 kg is 80.1 cm².

To calculate the diameter of the output line, we use the formula: pressure = force / area

where force is the weight of the mass being lifted, and area is the cross-sectional area of the output line. First, we convert the maximum weight the hydraulic lift can lift from kg to N (newtons): force = mass x gravity

force = 8730 kg x 9.81 m/s² = 85,556.5 N

Now we can calculate the area of the output line using the formula:

area = force / pressure

area = 85,556.5 N / 17 atm = 5,032.2 cm²

To convert the area to cm, we use the formula:

1 cm² = 0.0001 m²

Therefore, the area in cm² is 503.22 cm². Finally, we calculate the diameter of the output line using the formula:area = π x (diameter/2)²

diameter = √(4 x area / π)

diameter = √(4 x 503.22 cm² / π) = 80.1 cm

Therefore, the diameter of the output line is 80.1 cm.

Learn more about gauge pressure here:

https://brainly.com/question/29341536

#SPJ11

1. Infer What phrase is repeated in the title and the questions in the


first stanza? What does this repetition indicate about the poem's


speaker?

Answers

1. The phrase "What if we were alone?" is repeated in the title and the questions in the first stanza. This repetition indicates that the poem's speaker is contemplating the idea of solitude and isolation. The speaker is questioning the impact of being alone and how it would affect the way they see themselves, the world, and their place in it.

2. In line 5, a dash appears at the end of the third question to create a pause and emphasize the speaker's uncertainty about what would happen in the scenario they are imagining. The dash gives the reader a chance to consider the implications of being alone, and it creates a sense of tension and anticipation as the speaker waits for an answer that may never come.

3. The poet suggests that both space and the earth itself are mysterious by emphasizing their vastness and the unknown possibilities they contain. The speaker wonders about what would happen if they were alone in space or on earth, highlighting the vastness of the universe and the endless possibilities that exist beyond our comprehension.

4. The human need for connection and the fear of being alone. The poem suggests that humans are social creatures who need to be part of a community and that the idea of being alone can be frightening and overwhelming. The speaker's questions reveal their fear of isolation and their desire for human connection.

5. In the first stanza, the "words of the wiser" are spoken by Galileo. In the final stanza, the "wise" words belong to the speaker themselves. The speaker's realization that they would still be themselves even if they were alone is a moment of insight that reveals the poem's underlying message about the importance of self-awareness and self-acceptance.

learn more about repetition Refer: https://brainly.com/question/20960702

#SPJ11

complete question: “WHAT IF WE WERE ALONE?” Poem by William Stafford 1. Infer What phrase is repeated in the title and the questions in the first stanza? What does this repetition indicate about the poem’s speaker? 2. Interpret In line 5, why do you think a dash appears at the end of the third question? 3. Compare How does the poet suggest that both space and the earth itself are mysterious? 4. Draw Conclusions What do you think is the theme of “What If We Were Alone?” Why do you think so? 5. Notice & Note In the first stanza, you read some “words of the wiser” as spoken by Galileo. Whose “words” are described in the final stanza? What makes these “wise” words, too?

light of wavelength 530 nm is incident on two slits that are spaced 1.0mm apart . How far from the slits should the screen be placed so that the distance between the m = 0 and m = 1 bright fringes is 1.0 cm?

Answers

The screen should be placed 1886.8 mm (or about 1.9 meters) away from the slits in order for the distance between the m = 0 and m = 1 bright fringes to be 1.0 cm.

To solve this problem, we can use the formula for the distance between bright fringes:
y = (mλD) / d
Where y is the distance from the central bright fringe to the mth bright fringe on the screen, λ is the wavelength of the light, D is the distance from the slits to the screen, d is the distance between the two slits, and m is the order of the bright fringe.
We want to find the distance D, given that the distance between the m = 0 and m = 1 bright fringes is 1.0 cm. We know that for m = 0, y = 0, so we can use the formula for m = 1:
1 cm = (1 x 530 nm x D) / 1 mm
Solving for D, we get:
D = (1 cm x 1 mm) / (1 x 530 nm)
D = 1886.8 mm
Therefore, the screen should be placed 1886.8 mm (or about 1.9 meters) away from the slits in order for the distance between the m = 0 and m = 1 bright fringes to be 1.0 cm.

To know more about wavelength visit:

https://brainly.com/question/31143857

#SPJ11

There are no tides to be seen in the community swimming pool because ___

Answers

There are no tides to be seen in the community swimming pool because tides are caused by the gravitational pull of the moon and sun on the Earth's oceans.

Tides are primarily caused by the gravitational pull of the moon and sun on the Earth's oceans. The gravity of the moon causes the oceans to bulge out toward the moon, creating a high tide. On the opposite side of the Earth, there is also a high tide due to the centrifugal force created by the Earth's rotation.

When the moon and sun are aligned, their gravitational forces combine, creating a higher high tide (spring tide) and a lower low tide. This gravitational pull and the subsequent tides are not significant enough to affect a swimming pool, as the size of the pool is too small to be affected by the gravitational forces of the moon and sun. Therefore, there are no tides to be seen in a community swimming pool.

To learn more about tides, here

https://brainly.com/question/1029256

#SPJ4

The si unit for angular displacement is the radian. in calculations, what is the effect of using the radian?

Answers

Using radians as the unit for angular displacement simplifies calculations involving angles, especially in trigonometric functions.

The radian is defined as the ratio of the arc length to the radius of a circle, and because it is a dimensionless quantity, it allows for easier mathematical manipulations.

When working with radians, trigonometric functions such as sine, cosine, and tangent are expressed as simple ratios of the sides of a right triangle, making calculations simpler and more efficient.

Additionally, many physical laws, such as the laws of motion and the laws of conservation of energy, are formulated in terms of radians, making it easier to apply them to various physical situations.

In contrast, using degrees as the unit for angular displacement requires conversions between degrees and radians, which can be cumbersome and prone to errors.

Therefore, the use of radians as the unit for angular displacement is preferred in most scientific and mathematical applications.

To know more about angular displacement refer here

https://brainly.com/question/26483834#

#SPJ11

an nmos device carries 1 ma with vgs-vth=0.6 v and 1.6 ma with vgs - vth = 0.8v. if the device operates in the triode region, calculate vds and w/l

Answers

The values of vds and W/L are approximately 0.54 V and 3.09, respectively.

To calculate the values of vds and W/L, we need to use the equation for the drain current in the triode region:

ID = (W/L)μCox(VGS-VTH)^2*(1+λVDS) * (VDS - VDSsat)

where ID is the drain current, W/L is the channel width-to-length ratio, μCox is the oxide mobility, VGS is the gate-to-source voltage, VTH is the threshold voltage, λ is the channel length modulation parameter, VDS is the drain-to-source voltage, and VDSsat is the saturation voltage.

Since the device is operating in the triode region, we can assume that VDS is less than VDSsat, so we can set VDSsat to zero.

We are given that the device carries 1 mA with VGS-VTH=0.6 V and 1.6 mA with VGS-VTH=0.8 V. Let's use these values to create two equations:

1 mA = (W/L)μCox(0.6)^2*(1+λVDS) * (VDS - 0)

1.6 mA = (W/L)μCox(0.8)^2*(1+λVDS) * (VDS - 0)

Dividing the second equation by the first, we get:

1.6/1 = (0.8/0.6)^2*(1+λVDS)/(1+λVDS)

Simplifying, we get:

1.6 = (4/3)^2*(1+λVDS)

1.6 = (16/9)*(1+λVDS)

1+λVDS = 0.9

λVDS = -0.1

Now we can use one of the equations to solve for W/L. Let's use the first equation:

1 mA = (W/L)μCox(0.6)^2*(1-0.1)

1 mA = (W/L)μCox(0.6)^2*0.9

W/L = (1 mA)/(μCox*(0.6)^2*0.9)

W/L ≈ 3.09

Finally, we can use the equation for the drain current to solve for VDS. Let's use the first equation again:

1 mA = (3.09)μCox(0.6)^2*(1-0.1) * (VDS - 0)

VDS = (1 mA)/[(3.09)μCox(0.6)^2*0.9]

VDS ≈ 0.54 V

Therefore, the values of vds and W/L are approximately 0.54 V and 3.09, respectively.

To know more about VDS, refer to the link below:

https://brainly.com/question/15108484#

#SPJ11

Consider two radioactive samples: A 185 MBq sample of 235U, whose half life is 7.1 x 108 years A 185 MBq sample of 232Th, whose half life is 1.4 x 1010 years O The 232Th sample has a greater number of nuclei than the 235U sample. O The 235 U sample has a greater number of nuclei than the 232Th sample. O The two samples have the same number of nuclei.

Answers

The 232Th sample has a greater number of nuclei than the 235U sample due to its longer half-life.

The number of nuclei in a radioactive sample decreases with time due to decay. The rate of decay is determined by the half-life of the radioactive isotope.

The 232Th sample has a longer half-life than the 235U sample, which means that it decays more slowly and has a greater number of nuclei at any given time.

Therefore, the 232Th sample has a greater number of nuclei than the 235U sample. This is also supported by the fact that the initial activity (measured in Becquerels, Bq) of both samples is the same, indicating that they started with the same number of nuclei.

For more such questions on nuclei, click on:

https://brainly.com/question/29295841

#SPJ11

Comparing the results, you will find that the 232Th sample has a greater number of nuclei than the 235U sample.

Consider two radioactive samples: A 185 MBq sample of 235U, whose half-life is 7.1 x 10^8 years, and a 185 MBq sample of 232Th, whose half-life is 1.4 x 10^10 years. To compare the number of nuclei in each sample, we can use the formula:

Number of Nuclei = (Activity × Half-life) / Decay constant

First, we need to find the decay constant for each sample:

Decay constant = 0.693 / Half-life

For 235U:
Decay constant (235U) = 0.693 / (7.1 x 10^8 years)

For 232Th:
Decay constant (232Th) = 0.693 / (1.4 x 10^10 years)

Now, we can calculate the number of nuclei for each sample:

Nuclei (235U) = (185 MBq × 7.1 x 10^8 years) / Decay constant (235U)
Nuclei (232Th) = (185 MBq × 1.4 x 10^10 years) / Decay constant (232Th)

Comparing the results, you will find that the 232Th sample has a greater number of nuclei than the 235U sample.

Learn more about nuclei here:

brainly.com/question/18730750

#SPJ11

Compute |Ψ(x, t)|2 for the function Ψ(x, t) = Ψ(x)sin(ωt), where ω is a real constant. (Use the following as necessary: Ψ for Ψ(x), ω, t. Simplify your answer completely.)
|Ψ(x, t)|2 =

Answers

The absolute square of Ψ(x, t) is equal to the absolute square of Ψ(x) multiplied by the square of the sine of ωt.

To compute |Ψ(x, t)|^2 for the function Ψ(x, t) = Ψ(x)sin(ωt), we need to take the absolute square of the function. The absolute square, denoted as |Ψ(x, t)|^2, represents the probability density of finding a particle at a given position and time. In this case, we have Ψ(x) as the spatial part of the wave function and sin(ωt) as the time-dependent part, where ω is a real constant. Taking the absolute square of Ψ(x, t), we obtain |Ψ(x)|^2 * sin^2(ωt). Therefore, |Ψ(x, t)|^2 is given by the product of the absolute square of Ψ(x) and the square of the sine of ωt. This expression provides the probability density distribution of the particle over position and time.

Learn more about function here:

https://brainly.com/question/30721594

#SPJ11

find the intensity (in w/m2) of an electromagnetic wave having a peak magnetic field strength of 1.76 ✕ 10−9 t.

Answers

The intensity of the electromagnetic wave having a peak magnetic field strength of 1.76 ✕ 10−9 t is 1.23 × 10⁻¹⁴ W/m².

To find the intensity (in W/m²) of an electromagnetic wave with a peak magnetic field strength of 1.76 × 10⁻⁹ T, you can use the following formula:

Intensity = (c * μ₀ * B²) / 2

where:
- Intensity is the electromagnetic wave intensity in watts per square meter (W/m²)
- c is the speed of light in a vacuum, approximately 3 × 10⁸ m/s
- μ₀ is the permeability of free space, approximately 4π × 10⁻⁷ T·m/A
- B is the peak magnetic field strength, 1.76 × 10⁻⁹ T

Using the given values, the calculation becomes:

Intensity = (3 × 10⁸ m/s * 4π × 10⁻⁷ T·m/A * (1.76 × 10⁻⁹ T)²) / 2

Solve for Intensity:

Intensity ≈ 1.23 × 10⁻¹⁴ W/m²

Therefore, the intensity of the electromagnetic wave is approximately 1.23 × 10⁻¹⁴ W/m².



If you need to learn more about  electromagnetic waves click here:

https://brainly.com/question/14953576

#SPJ11

Air expands isentropically from an insulated cylinder from 200°C and 400 kPa abs to 20 kPa abs Find T2 in °C a) 24 b) -28 c) -51 d) -72 e) -93

Answers

The value of T2 solved by the equation for isentropic expansion is b) -28°C.

We can use the ideal gas law and the equation for isentropic expansion to solve for T2.

From the ideal gas law:

P1V1 = nRT1

where P1 = 400 kPa abs, V1 is the initial volume (unknown), n is the number of moles (unknown), R is the gas constant, and T1 = 200°C + 273.15 = 473.15 K.

We can rearrange this equation to solve for V1:

V1 = nRT1 / P1

Now, for the isentropic expansion:

P1V1^γ = P2V2^γ

where γ = Cp / Cv is the ratio of specific heats (1.4 for air), P2 = 20 kPa abs, and V2 is the final volume (unknown).

We can rearrange this equation to solve for V2:

V2 = V1 (P1 / P2)^(1/γ)

Substituting V1 from the first equation:

V2 = nRT1 / P1 (P1 / P2)^(1/γ)

Now, using the ideal gas law again to solve for T2:

P2V2 = nRT2

Substituting V2 from the previous equation:

P2 (nRT1 / P1) (P1 / P2)^(1/γ) = nRT2

Canceling out the n and rearranging:

T2 = T1 (P2 / P1)^((γ-1)/γ)

Plugging in the values:

T2 = 473.15 K (20 kPa / 400 kPa)^((1.4-1)/1.4) = 327.4 K

Converting back to Celsius:

T2 = 327.4 K - 273.15 = 54.25°C

This is not one of the answer choices given. However, we can see that the temperature has increased from the initial temperature of 200°C, which means that choices b, c, d, and e are all incorrect. Therefore, the answer must be a) 24°C.
Hi! To find the final temperature (T2) when air expands isentropically from an insulated cylinder, we can use the following relationship:

(T2/T1) = (P2/P1)^[(γ-1)/γ]

where T1 is the initial temperature, P1 and P2 are the initial and final pressures, and γ (gamma) is the specific heat ratio for air, which is approximately 1.4.

Given the information, T1 = 200°C = 473.15 K, P1 = 400 kPa, and P2 = 20 kPa.

Now, plug in the values and solve for T2:

(T2/473.15) = (20/400)^[(1.4-1)/1.4]
T2 = 473.15 * (0.05)^(0.2857)

After calculating, we find that T2 ≈ 249.85 K. To convert back to Celsius, subtract 273.15:

T2 = 249.85 - 273.15 = -23.3°C
While this value is not exactly listed among the options, it is closest to option b) -28°C.

Learn more about "ideal gas law": https://brainly.com/question/25290815

#SPJ11

the piston of a hydraulic automobile lift is 0.30 m in diameter. what gauge pressure, in pascals, is required to lift a car with a mass of 1200 kg?

Answers

The gauge pressure required to lift a car with a mass of 1200 kg using a hydraulic automobile lift with a piston diameter of 0.30 m is approximately 3.97 × 10⁵ Pa.

Determine the gauge pressure?

To calculate the gauge pressure, we can use the equation:

P = F/A,

where P is the pressure, F is the force exerted on the piston, and A is the area of the piston.

The force required to lift the car can be calculated using Newton's second law:

F = m × g,

where m is the mass of the car and g is the acceleration due to gravity.

Plugging in the given values, we have:

F = 1200 kg × 9.8 m/s² = 11760 N.

The area of the piston can be calculated using the formula for the area of a circle:

A = π × r²,

where r is the radius of the piston.

Given the diameter of the piston as 0.30 m, we find the radius to be 0.15 m.

Plugging in the values, we have:

A = π × (0.15 m)² ≈ 0.0707 m².

Finally, substituting the values into the pressure equation, we find:

P = (11760 N) / (0.0707 m²) ≈ 3.97 × 10⁵ Pa.

Therefore, the gauge pressure required to lift the car is approximately 3.97 × 10⁵ Pa.

To know more about gauge pressure, refer here:

https://brainly.com/question/6984092#

#SPJ4

Calculate the activation energy, a , in kilojoules per mole for a reaction at 65.0 ∘c that has a rate constant of 0.295 s−1 and a frequency factor of 1.20×10^11 s−1

Answers

The Arrhenius equation relates the rate constant (k) of a reaction to the temperature (T), the activation energy (a), and the frequency factor (A):

[tex]k = A * exp(-a / (R * T))[/tex]

where R is the gas constant.

We can rearrange this equation to solve for the activation energy:

a = -ln(k/A) * R * T

Substituting the known values:

k = 0.295 s^-1

A = 1.20 × 10^11 s^-1

T = 65.0 °C = 338.2 K (remember to convert to kelvin)

R = 8.314 J/(mol*K)

a = -ln((0.295 s^-1) / (1.20 × 10^11 s^-1)) * (8.314 J/(mol*K)) * (338.2 K)

a = 147.4 kJ/mol

Therefore, the activation energy is 147.4 kJ/mol.

To know more about refer  Arrhenius equation here

brainly.com/question/30514582#

#SPJ11

Two identical pucks collide on an air hockey table. One puck was originally at rest. (a) If the incoming puck has a speed of 6.00 m/s and scatters to an angle of 30.0º ,what is the velocity (magnitude and direction) of the second puck? (You may use the result that θ1 − θ2 = 90º for elastic collisions of objects that have identical masses.) (b) Confirm that the collision is elastic.

Answers

The velocity of the second puck is 3 m/s and the collision is elastic as the initial and final kinetic energies of the system are same.

(a) Since the collision is elastic and the pucks are identical, we know that the angle between their velocities after the collision will be 90 degrees, as given by the result θ₁ - θ₂ = 90 degrees.

Let's call the initial puck (the one that was at rest) puck 1, and the incoming puck puck 2. Let v₁ and v₂ be the magnitudes of their velocities after the collision, and θ be the angle between v₁ and the x-axis. Then we have:

Conservation of momentum in the x-direction:

m₁(0) + m₂(6) cos(30°) = m₁v₁ cos(θ) + m₂v₂ cos(θ + 90°)

Simplifying, we get:

3m₂ = m₁v₁ cos(θ) - m₂v₂ sin(θ)

Conservation of momentum in the y-direction:

m₁(0) + m₂(6) sin(30°) = m₁v₁ sin(θ) + m₂v₂ sin(θ + 90°)

Simplifying, we get:

3m₂ = m₁v₁ sin(θ) + m₂v₂ cos(θ)

We can solve these two equations for v₁ and v₂:

v₁ = (3m₂ + 6m₂ sin(30°)) / m₁

v₂ = (6m₂ cos(30°) - m₁v₁ cos(θ)) / m₂

Substituting the given values m₁ = m₂ and θ = 60.0°, we get:

v₁ = 5.20 m/s

v₂ = 3.00 m/s

The magnitude of the velocity of the second puck is 3 m/s, and the direction is 60.0 degrees relative to the x-axis.

(b) To confirm that the collision is elastic, we can check if the kinetic energy of the system is conserved.

The initial kinetic energy of the system is:

K₁ = (1/2)m₂(6)² = 18m₂

The final kinetic energy of the system is:

K₂ = (1/2)m₁v₁² + (1/2)m₂v₂²

Substituting the given values and solving, we get:

K₂ = 18m₂

Since K₁ = K₂, we see that the kinetic energy of the system is conserved, which confirms that the collision is elastic.

Learn more about elastic collision here

brainly.com/question/31356190

#SPJ4

calculate (in mev ) the total binding energy for 40ar .

Answers

The total binding energy for ⁴⁰Ar is 342.8 MeV. The total binding energy of an atomic nucleus is the amount of energy required to completely separate all of its individual nucleons (protons and neutrons) from each other.

TThis energy can be calculated using the Einstein's famous equation E=mc², where E is the energy, m is the mass difference between the nucleus and its individual nucleons, and c is the speed of light.

To calculate the total binding energy of ⁴⁰Ar, we first need to know its mass. The mass of ⁴⁰Ar is 39.9623831237 atomic mass units (amu). Next, we need to calculate the mass of its individual nucleons.

The mass of a proton is 1.007276 amu and the mass of a neutron is 1.008665 amu. Multiplying the number of protons (18) and neutrons (22) by their respective masses and adding them together, we get a total mass of 37.704379 amu for the nucleons in ⁴⁰Ar.

The mass difference between ⁴⁰Ar and its individual nucleons is then 39.9623831237 amu - 37.704379 amu = 2.2580041237 amu. Converting this mass difference to energy using E=mc², we get a total binding energy of 342.8 MeV.

To know more about binding energy, refer here:

https://brainly.com/question/15718710#

#SPJ11

cm/s,and base with W=0.65m. acalculate the diffusion length and chcck if W/L

Answers

The diffusion length can be calculated using the formula Ld = √(Dτ), where D is the diffusion coefficient and τ is the carrier lifetime. Once the diffusion length is calculated, we can check if W/L < Ld to determine if the device is in the diffusion-limited regime.

Can we determine if a device is in the diffusion-limited regime by calculating the diffusion length and comparing it to W/L?

The diffusion length is a measure of how far carriers can diffuse through a material before recombining. If the device is in the diffusion-limited regime, the diffusion length will be shorter than the device dimensions. In this case, we can calculate the diffusion length using the formula:

Ld = √(Dτ), where D is the diffusion coefficient and τ is the carrier lifetime. Once we have calculated the diffusion length, we can compare it to the device dimensions by calculating the aspect ratio W/L. If W/L is less than the diffusion length, the device is in the diffusion-limited regime.

Learn more about diffusion length

brainly.com/question/30901364

#SPJ11

The Bohr radius of the hydrogen atom is 0.0529 nm. That's the radius in the n=1 state. What is the radius of the hydrogen atom in the n=3 state.?
A. 0.48 nm
B. 0.16 nm
C. 0.0529 nm
D. 0.00588 nm

Answers

The radius of the hydrogen atom in the n=3 state is option A. 0.48 nm

The radius of a hydrogen atom in any given energy level can be calculated using the formula

[tex]r_n[/tex] = [tex]n^2[/tex] * [tex]a_0[/tex],

where r_n is the radius at the energy level n, n is the principal quantum number, and a_0 is the Bohr radius (0.0529 nm).

In this case, we are looking for the radius at n=3.

Using the formula:

[tex]r_3[/tex] = [tex]3^2[/tex] * 0.0529 nm = 9 * 0.0529 nm = 0.4761 nm

The closest answer to this value is 0.48 nm

It is important to note that as the energy level (n) increases, the radius of the atom also increases. This is because higher energy levels allow for electrons to occupy orbitals further away from the nucleus. This increase in distance results in an increase in the radius of the atom.

In summary, we used the formula for the Bohr radius to calculate the radius of the hydrogen atom in the n=3 state and found that the answer is 0.48 nm (Option A).

Know more about the Hydrogen atom here :

https://brainly.com/question/31850073

#SPJ11

a disc rotates at 60 rpm (revolutions per minute). what is the angular speed (in rad/s)?

Answers

The angular speed of the disc is 2π radians per second.

The formula to convert revolutions per minute (rpm) to radians per second (rad/s) is:

angular speed (rad/s) = (2π / 60) x rpm

where 2π is the conversion factor from revolutions to radians.

Substituting the given value of 60 rpm into the formula, we get:

angular speed (rad/s) = (2π / 60) x 60

= 2π radians per second

Therefore, the angular speed of the disc is 2π radians per second.

Click the below link, to learn more about Angular speed:

https://brainly.com/question/28439806

#SPJ11

Derive an expression for the speed of a particle of rest mass m in terms of its total energy E. Express your answer in terms of the variables m and E, and the speed of light c.

Answers

An expression for the speed of a particle of rest mass m in terms of its total energy E v = c√[(E²)/(m²c²) - 1].

To derive the expression for the speed of a particle with rest mass m and total energy E, we will use the energy-momentum relation from special relativity. The relation is:
E² = (mc²)² + (pc)²
where E is the total energy, m is the rest mass, c is the speed of light, and p is the momentum of the particle. The momentum can be expressed as p = mv, where v is the speed of the particle. So, the equation becomes:
E² = (mc²)² + (mvc)²
Now, we will solve for v. First, factor out the common term m²c²:
E² = m²c²(1 + v²/c²)
Next, divide both sides by m²c²:
(E²)/(m²c²) = 1 + v²/c²
Subtract 1 from both sides:
(E²)/(m²c²) - 1 = v²/c²
Finally, multiply both sides by c² and take the square root to obtain v:
v = c√[(E²)/(m²c²) - 1]
This expression gives the speed of a particle with rest mass m and total energy E in terms of the speed of light c.

To know more about energy visit:

brainly.com/question/29647468

#SPJ11

current is flowing in a conducting metal wire the charges on average are typically moving parallel to the current
Select the correct answer
the charges on average are typically moving parallel (same direction) to the current the charges on average are typically moving nowhere because the charges on average are at rest. the charges on average are typically moving perpendicular (at 90 degrees) to the current the charges on average are typically moving anti-parallel (opposite direction) to the current.

Answers

The charges on average are typically moving parallel (same direction) to the current. But they still continue to move in the same direction as the current.

In a conducting metal wire, the flow of current is due to the movement of negatively charged electrons. These electrons move from the negative terminal of the power source towards the positive terminal. As they move through the wire, they collide with other atoms and lose some of their energy.

In a conducting metal wire, when current flows, the electric charges (usually electrons) move through the wire. These charges typically move in the same direction as the current, which means they are moving parallel to the current. This movement of charges is what allows the transfer of energy and the flow of electricity in the circuit.

To know more about current visit:

https://brainly.com/question/31051471

#SPJ11

calculate the velocity of an electron (me = 9.10939×10-31 kg) having a de broglie wavelength of 270.8 pm.

Answers

Velocity of electron with 270.8 pm de Broglie wavelength is 6.25 x [tex]10^{6}[/tex]m/s.


To calculate the velocity of an electron with a de Broglie wavelength of 270.8 pm, we can use the formula v = h/λm, where h is the Planck constant, λ is the de Broglie wavelength, and m is the mass of the particle.

Plugging in the values, we get v = (6.626 x [tex]10^{-34}[/tex] J.s)/(270.8 x [tex]10^{-12}[/tex]m)(9.10939 x [tex]10^{-31}[/tex] kg), which simplifies to v = 6.25 x [tex]10^{6 }[/tex]m/s.

This is an extremely high velocity for an electron, and it illustrates the wave-particle duality of matter and the important role that quantum mechanics plays in understanding the behavior of subatomic particles.

For more such questions on Broglie wavelength, click on:

https://brainly.com/question/30216495

#SPJ11

The velocity of an electron with a de Broglie wavelength of 270.8 pm is 0 m/s, since it is at rest.To calculate the velocity of an electron with a given de Broglie wavelength, we can use the de Broglie equation, which states that the wavelength (λ) of a particle is equal to its Planck's constant (h) divided by its momentum (p). Mathematically, this can be represented as λ = h/p.

To find the velocity (v) of an electron with a de Broglie wavelength of 270.8 pm, we first need to convert the wavelength from picometers (pm) to meters (m), which gives us:

λ = 270.8 pm = 270.8 × 10^-12 m

Next, we can calculate the momentum (p) of the electron using the same equation, but rearranged to solve for momentum:

p = h/λ

Where h is Planck's constant, which is equal to 6.626 × 10^-34 J·s.

p = (6.626 × 10^-34 J·s) / (270.8 × 10^-12 m) = 2.449 × 10^-24 kg·m/s

Now that we have the momentum of the electron, we can use the classical equation for kinetic energy to find its velocity (v):

K.E. = (1/2)mv^2

Where m is the mass of the electron and K.E. is its kinetic energy. Since we know the mass of an electron (9.10939×10^-31 kg), we can rearrange the equation to solve for velocity:

v = √(2K.E./m)

Since the electron is at rest, it has no initial kinetic energy, so we can simplify the equation to:

v = √(0/9.10939×10^-31 kg) = 0 m/s

Therefore, the velocity of an electron with a de Broglie wavelength of 270.8 pm is 0 m/s, since it is at rest.

learn more about Broglie wavelength here: brainly.com/question/17295250

#SPJ11

An electric current i = 0.55 a is flowing in a circular wire with radius r = 0.055 m. Express the magnetic field vector generated at the center in terms of the current the radius vector R.

Answers

The magnetic field vector generated at the center of the wire is 5.55 × 10^-5 T in magnitude and is perpendicular to the plane of the wire.

The magnetic field vector generated by a circular wire carrying an electric current can be calculated using the Biot-Savart law:

B = (μ₀/4π) * (i / r) * ∫ dl x R / R³

where μ₀ is the permeability of free space, i is the current, r is the radius of the wire, dl is an infinitesimal element of length along the wire,

R is the position vector from the element of length to the point where the magnetic field is being calculated, and the integral is taken over the entire length of the wire.

In this case, we are interested in the magnetic field vector at the center of the wire, where R = 0. The position vector of any element of length dl on the wire is given by dl x R, which is perpendicular to both dl and R and has a magnitude of dl * R. Therefore, we can simplify the integral to:

B = (μ₀/4π) * (i / r) * ∫ dl / R²

where the integral is taken over the entire length of the wire.

Since the wire is circular, the length of the wire is given by 2πr. Therefore, we can further simplify the integral to:

B = (μ₀/4π) * (i / r) * ∫ 2πr / R² dl

The integral in this expression can be evaluated using the relationship between R and dl, which gives:

R² = r² + (dl/2)²

Therefore, we can substitute this expression into the integral and simplify:

[tex]B = (μ₀/4π) * (i / r) * ∫ 2πr / (r² + (dl/2)²)^(3/2) dl[/tex]

This integral can be solved using the substitution x = dl/2r, which gives:

B = (μ₀ i / 2 r) * ∫ 1 / (1 + x²)^(3/2) dx from 0 to 1

The integral in this expression can be evaluated using a trigonometric substitution, which gives:

B = (μ₀ i / 2 r) * [arcsin(1) - arcsin(0)]

Simplifying further, we get:

B = (μ₀ i / 2 r) * π/2

Finally, substituting the values given in the problem, we get:

B = (μ₀ * 0.55 A / 2 * 0.055 m) * π/2

B = 5.55 × 10^-5 T

Therefore, the magnetic field vector generated at the center of the wire is 5.55 × 10^-5 T in magnitude and is perpendicular to the plane of the wire.

To know more about magnetic field vector refer here

https://brainly.com/question/3190862#

#SPJ11

true/false. determine whether each statement is true or false. justify each answer. question content area bottom part 1 a. a vector is any element of a vector space.

Answers

This statement "a vector is any element of a vector space" is True.

A vector is any element of a vector space, as a vector space is a collection of objects called vectors, which satisfy certain axioms such as closure under addition and scalar multiplication.

A vector can be represented as a directed line segment in Euclidean space with a magnitude and direction, or as an n-tuple of numbers in an abstract vector space. Therefore, a vector is by definition an element of a vector space.

To know more about vector refer here

https://brainly.com/question/29740341#

#SPJ11

A flat plate of width 1 m and length 0. 2 m is maintained at a temperature of 32C. Ambient fluid at 22C flows across the top of the plate in parallel flow. Determine the average heat transfer coefficient, the convection heat transfer rate from the top of the plate, and the drag force on the plate.

Answers

Using Reynolds analogy, we know that Nusselt number = (1.86 × Re × Pr × (d/L) × (1/2) ) / (1 + 0.48 × (Pr^(1/2)−1) × (Re×(d/L))^(1/2) × (1/2) ).Here, d = 0.2 m (since the fluid flows across the top surface of the plate).

So, the Nusselt number becomes: Nu = (1.86 × Re × Pr × (0.2/1) × (1/2)) / (1 + 0.48 × (0.71^(1/2)−1) × (Re×(0.2/1))^(1/2) × (1/2)).

Putting all the given values, we get Nu = 172.75.

Therefore, the average heat transfer coefficient, h is given as h = (Nu × k) / d= (172.75 × 0.16) / 0.2= 138.2 W/m2K.

Taking surface area, A = w × L = 1 × 0.2 = 0.2 m2.

Heat transfer rate, Q is given as Q = h × A × (Tp − T∞)= 138.2 × 0.2 × (32 − 22)= 276.4 W.

Finally, the drag force on the plate can be calculated using the formula: Drag force = (Cd × ρ × V^2 × A) / 2,

where Cd is the drag coefficient, ρ is the fluid density, and V is the fluid velocity.

Since the fluid is flowing in parallel over the plate, the velocity of the fluid is equal to the free stream velocity, V∞.

The drag coefficient for a flat plate in parallel flow is 1.328.

Drag force = (1.328 × 1.225 × V∞^2 × 0.2) / 2 = 0.164 × V∞^2.

Average heat transfer coefficient, h = 138.2 W/m2K, Convection heat transfer rate from the top of the plate, Q = 276.4 W and Drag force on the plate = 0.164 × V∞^2.

Learn more about fluid density here ;

https://brainly.com/question/30257507

#SPJ11

Questions 34-35 A particle moves in a circle in such a way that the x- and y-coordinates of its motion, given in meters as functions of time r in seconds, are: x = 5 cos(3t) y= 5 sin(3t). 34. What is the radius of the circle? a. 3/5m
b. 5/2m
c. 5m
d. 10m
e. 15 m
35. Which of the following is true of the speed of the particle? a.it is always equal to 5 m/s. b.It is always equal to 15 m/s. c.It oscillates with a range of 0 to 5 m/s. d.it oscillates with a range of 0 to 15 m/s. e.It oscillates with a range of 5 to 15 m/s.

Answers

We can use the equation for the distance of a point from the origin in Cartesian coordinates to find the radius of the circle answer to question 35 is (b), the speed of the particle is always equal to 15 m/s.

Radius is a term used in geometry to describe the distance between the center of a circle or sphere and any point on its circumference or surface, respectively.For a circle, the radius is the length of a line segment that extends from the center of the circle to any point on its circumference. The radius is typically denoted by the letter "r". The radius of a circle is half of its diameter, which is the distance across the circle through its center.For a sphere, the radius is the length of a line segment that extends from the center of the sphere to any point on its surface. The radius is typically denoted by the letter "r". The radius of a sphere is half of its diameter, which is the distance across the sphere through its center.

To know more about sphere visit :

https://brainly.com/question/11374994

#SPJ11

The electric potential at a certain point in space is 12 V. What is the electric potential energy of a -3.0 micro coulomb charge placed at that point?

Answers

Answer to the question is that the electric potential energy of a -3.0 micro coulomb charge placed at a point in space with an electric potential of 12 V is -36 x 10^-6 J.


It's important to understand that electric potential is the electric potential energy per unit charge, so it's the amount of electric potential energy that a unit of charge would have at that point in space. In this case, the electric potential at the point in space is 12 V, which means that one coulomb of charge would have an electric potential energy of 12 J at that point.

To calculate the electric potential energy of a -3.0 micro coulomb charge at that point, we need to use the formula for electric potential energy, which is:

Electric Potential Energy = Charge x Electric Potential

We know that the charge is -3.0 micro coulombs, which is equivalent to -3.0 x 10^-6 C. And we know that the electric potential at the point is 12 V. So we can substitute these values into the formula:

Electric Potential Energy = (-3.0 x 10^-6 C) x (12 V)
Electric Potential Energy = -36 x 10^-6 J

Therefore, the electric potential energy of the charge at that point is -36 x 10^-6 J.

To learn more about electric potential energy visit:

brainly.com/question/12645463

#SPJ11

Parallel rays of light that hit a concave mirror will come together:a. at the center of curvatureb. at the focal point.c. at a point half way to the focal point.d. at infinity.e. at the double focal distance.

Answers

Parallel rays of light that hit a concave mirror will come together b. at the focal point.

When parallel rays of light hit a concave mirror, they will converge and come together at a single point. This point is called the focal point and it is located along the principal axis of the mirror. The distance from the center of the mirror to the focal point is known as the focal length.

This phenomenon is known as converging or concave mirror. The location of the focal point is determined by the shape of the mirror, specifically its curvature. The curvature causes the light rays to reflect and converge towards the focal point. Therefore, option (b) is the correct answer: parallel rays of light that hit a concave mirror will come together at the focal point.

To know more about the Parallel rays refer here :

https://brainly.com/question/27507033#

#SPJ11

Other Questions
true or false when the concentration of water in bodily fluids increases, the secretion of adh increases Which of these elements requires the highest amount of energy to remove a valence electron resulting in the formation of a cation?Group of answer choicesBoronCarbonOxygenSodium An exception applying only to existing premises wiring systems permits the continued use of the grounded conductor for grounding at separate buildings under which of the following restrictive conditions? Select one: a. An EGC is not included with the supply circuit to the separate building or structure. b. Ground-fault protection of equipment is not provided on the supply side of the feeder. c. There are no common electrically continuous metallic paths between the feeder source and the destination at the building or structure served. d. All of the above. how might the cognitive effects of scarcity (e.g. focus dividend, bandwidth tax) or present bias affect the financial aspect of your decision? how will you reduce this effect? which regions on earth have displayed the greatest temperature anomalies in 2010 (based on the 1951-1980 average)? a manufacturer is considering eliminating a segment because it shows the following $6,100 loss. all $20,400 of its variable costs are avoidable, and $36,900 of its fixed costs are avoidable. segment income (loss) sales $ 61,200 variable costs 20,400 contribution margin 40,800 fixed costs 46,900 income (loss) (6,100) (a) compute the income increase or decrease from eliminating this segment. (b) should the segment be eliminated? In Exercises 33-40, compute the surface area of revolution about the x-axis over the interval. 33. y=x,[0,4] 34. y=4x+3,[0,1] 35. y=x 3,[0,2] 36. y=x 2,[0,4] 37. y=(4x 2/3) 3/2,[0,8] 38. y=e x,[0,1] 39. y= 41x 2 21lnx,[1,e] 40. y=sinx,[0,] T / F : when more hours of labor time are necessary to complete a job than the standard allows, the labor efficiency variance is unfavorable. in 1968, economist milton friedman published a paper criticizing the phillips curve on the grounds that find the value of k for which the given function is a probability density function. f(x) = 2k on [1, 1] your gasoline runs out on an uphill road inclined at you manage to coast another m before the car stops. what was your initial speed? A laptop computer was purchased for $1250. Each year since, the resale value has decreased by 22%. Let t be the number of years since the purchase. Let y be the resale value of the laptop computer, in dollars. Write an exponential function showing the relationship between y and t Which of the following statements is the most appropiate for changing the name of student "Thomas" to "Tom"?(A) student = new Person("Tom", 1995);(B) student.myName = "Tom";(C) student.getName("Tom");(D) student.setName("Tom");(E) Person.setName("Tom"); Which of the following is a characteristic of degenerate matter in a white dwarf star?helium is actively fusing into carbonelectrons and protons join together in the nucleus to make neutrons and neutrinosthe degenerate matter region is expanding as time passes, until it covers a region the size of the orbit of Marsthe electrons get as close to each other as possible and resist further compression multistate income tax planning can be effective for the taxpayer because How can a dynamic system be put into motion? Select all that apply. a. Applying an externally applied forcing function b. Imposing a boundary condition c. Imposing an initial condition d. Normalizing the differential equation you have crossed a bushy, variegated plant (the genotype is bushy /bushy ; green-/green-) with a fully green but straggly plant (with genotype bushy-/bushy- ; green /green ) and collected the seeds that represent the next generation. both straggly and variegated are recessive traits. a. you put 10 of these seeds into soil and wait for the plants to grow. what phenotype(s) do you expect to observe after these plants mature? b. assuming that all 10 seeds develop and make an adult plant, how many of each of these phenotypes are seen? now, you perform another genetic cross with a different pair of plants. flowers of a dwarf plant with a non-purple stem are pollinated with pollen collected from a non-dwarf plant with a purple stem. after seeds develop from this cross-pollination event (the seeds represent the next generation of plants), you place the seeds into soil and wait for seedlings to grow. all the plants that you observe are non-dwarf size and have purple stems. c. are these resulting plants homozygous or heterozygous? d. from these results, what traits are dominant and which are recessive? A random sample of 100 customers, who visited a department store, spent an average of $77 at this store with a standard deviation of $19. The 90% confidence interval for the population mean is: Select one: o O O a. 75.56 to 79.44 b. 76.89 to 82.11 c. 70.18 to 83.82 d. 73.87 to 80.14 at the end of the Korean war, the border ultimately didnt change between North Korea and South Korea. However, this war is still significant in terms of the Cold War. Why is that?1. The United States chose to abandon a democracy2. This was the first aspect of the hot water or armed conflict.3. There was an actual fighting between US troops and the Soviet union troops.4. This demonstrated the union nations in ability to solve international conflicts Raquel ha encontrado 3 pares de tenis para correr que le gustan cuestan$ 450 $459 y $479 ella tiene ahorrados $310 y tiene un empleo donde gana $10. 50 la hora cuntas horas debe trabajar para poder pagar cualquiera de los pares de tenis