A student walks 50 m on a bearing 025° and then 200 m due east. How far is she from her starting point?​

Answers

Answer 1

Bearing is degrees from north, so we have a triangle ABC where AB=50m is 90-25=65 degrees to the horizontal, A being the starting point. BC=200m is horizontal. AC is the distance we need to find.

Angle ABC is 90+25=115 degrees so we can use the cosine rule to find AC.

AC^2=AB^2+BC^2-2AB.BCcos115=2500+40000+20000cos65=50952.365 approx.

AC=√50952.365=225.73m approx.


Related Questions

Prove that every subgroup of Dn of odd order is cyclic.

Answers

To prove that every subgroup of $D_n$ of odd order is cyclic, we will use the following fact:

Fact: If $G$ is a group of odd order, then every subgroup of $G$ is also of odd order.

Proof of the fact: Let $H$ be a subgroup of $G$. By Lagrange's theorem, the order of $H$ divides the order of $G$. But the order of $G$ is odd, so the order of $H$ is odd as well. $\square$

Now, let $H$ be a subgroup of $D_n$ of odd order. We will show that $H$ is cyclic.

If $H$ is the trivial subgroup, then it is clearly cyclic. Otherwise, $H$ contains at least one non-identity element, say $x$. If $x$ is a reflection, then $x^2$ is the identity and $H$ contains the two elements $x$ and $x^2$, which contradicts the assumption that $H$ has odd order. Therefore, $x$ must be a rotation.

Let $k$ be the smallest positive integer such that $x^k$ is a reflection. Note that $k$ must divide $n$, since $x^n$ is the identity and $x^k$ is a reflection. We claim that $H$ is generated by $x^k$.

First, we show that every power of $x^k$ is in $H$. Let $m$ be an arbitrary integer. If $m$ is even, then $(x^k)^m$ is a rotation and is therefore in $H$. If $m$ is odd, then $(x^k)^m=x^{km}$ is a composition of a rotation and a reflection, and is therefore in $H$.

Next, we show that $x^k$ generates $H$. Let $y$ be an arbitrary element of $H$. If $y$ is a rotation, then $y=x^{km}$ for some integer $m$ (since $x^k$ is a rotation). If $y$ is a reflection, then $yx=x^{-1}y$ is a rotation, so $yx=x^{km}$ for some integer $m$ (since $x^k$ is the smallest power of $x$ that is a reflection). Therefore, $y=x^{-1}(x^{km})=(x^k)^{-1}(x^{km+1})$, which is a power of $x^k$.

Thus, we have shown that $H$ is generated by $x^k$, and since $x^k$ is a rotation, it is of infinite order. Therefore, $H$ is cyclic.

Learn more about subgroup here:

https://brainly.com/question/31611800

#SPJ11

Find the directional derivative of f(x, y) =
sqrt1a.gif xy
at P(9, 4) in the direction from P to Q(12, 0).
Duf(9, 4) =
7.–/0.83 pointsSCalc7 14.6.020.My Notes
Question Part
Points
Submissions Used
Find the directional derivative of f(x, y, z) = xy + yz + zx at P(3, −3, 4) in the direction from P to Q(2, 4, 5).
Duf(3, −3, 4) =
8.–/0.83 pointsSCalc7 14.6.021.My Notes
Question Part
Points
Submissions Used
Find the maximum rate of change of f at the given point and the direction in which it occurs.f(x, y) = 8y
sqrt1a.gif x
, (16, 9)
maximum rate of change direction vector 9.–/0.83 pointsSCalc7 14.6.505.XP.My Notes
Question Part
Points
Submissions Used
Find the maximum rate of change of f at the given point and the direction in which it occurs.
f(x, y) = 2y2/x,
(3, 6)
maximum rate of change direction 10.–/0.83 pointsSCalc7 14.6.033.My Notes
Question Part
Points
Submissions Used
Suppose that over a certain region of space the electrical potential V is given by the following equation.
V(x, y, z) = 2x2 − 3xy + xyz
(a) Find the rate of change of the potential at P(3, 4, 5) in the direction of the vector v = i + j − k.
(b) In which direction does V change most rapidly at P?
(c) What is the maximum rate of change at P?
11.–/0.83 pointsSCalc7 14.6.508.XP.My Notes
Question Part
Points
Submissions Used
Find equations of the following.
x2 − 4y2 + z2 + yz = 36, (7, 2, −3)
(a) the tangent plane
(b) parametric equations of the normal line to the given surface at the specified point. (Enter your answer as a comma-separated list of equations. Let x, y, and z be in terms of t.)
12.–/0.87 pointsSCalc7 14.6.509.XP.My Notes
Question Part
Points
Submissions Used
Find equations of the following.
5
2
(x − z) = 10arctan(yz), (1 + π, 1, 1)
(a) the tangent plane
(b) parametric equations of the normal line to the given surface at the specified point. (Enter your answer as a comma-separated list of equations. Let x, y, and z be in terms of t.)

Answers

Q is -1/10.

P to Q is 4.

The magnitude of the gradient at (16, 9) is ||∇f(16,9)|| = √(12^2+32^2)

Find the directional derivative of f(x, y) = sqrt(xy) at P(9, 4) in the direction from P to Q(12, 0).

To find the directional derivative, we first need to find the gradient of f at P(9, 4):

∇f(x,y) = [∂f/∂x, ∂f/∂y] = [√y/2√xy, √x/2√xy] = [1/6, 1/4]

Next, we need to find the unit vector in the direction from P to Q:

v = [12-9, 0-4]/√(12-9)^2+(0-4)^2 = [3/5, -4/5]

Finally, the directional derivative of f at P(9,4) in the direction of v is:

D_v f(9,4) = ∇f(9,4)·v = [1/6, 1/4]·[3/5, -4/5] = -1/10.

Therefore, the directional derivative of f at P(9, 4) in the direction from P to Q is -1/10.

Find the directional derivative of f(x, y, z) = xy + yz + zx at P(3, −3, 4) in the direction from P to Q(2, 4, 5).

Following the same process as in the previous question, we first find the gradient of f at P(3, -3, 4):

∇f(x,y,z) = [∂f/∂x, ∂f/∂y, ∂f/∂z] = [y+z, x+z, x+y] = [1, 1, 0]

Next, we need to find the unit vector in the direction from P to Q:

v = [2-3, 4-(-3), 5-4]/√(2-3)^2+(4-(-3))^2+(5-4)^2 = [-1/3, 7/3, 1/3]

Finally, the directional derivative of f at P(3, -3, 4) in the direction of v is:

D_v f(3, -3, 4) = ∇f(3,-3,4)·v = [1, 1, 0]·[-1/3, 7/3, 1/3] = 4.

Therefore, the directional derivative of f at P(3, -3, 4) in the direction from P to Q is 4.

Find the maximum rate of change of f(x, y) = 8y√(x) at the point (16, 9) and the direction in which it occurs.

The maximum rate of change of f at (16, 9) occurs in the direction of the gradient of f at (16, 9), which points in the direction of maximum increase.

∇f(x,y) = [∂f/∂x, ∂f/∂y] = [4y/√x, 8√x] = [12, 32] at (16, 9)

The magnitude of the gradient at (16, 9) is ||∇f(16,9)|| = √(12^2+32^2)

Learn more about Magnitude

brainly.com/question/18722002

#SPJ11

find the average value of the function over the given interval. f(x) = 36 − x2 on [−2, 2]

Answers

The average value of the function f(x) = 36 - x² on the interval [-2, 2] is 34.

To find the average value of a function over a given interval, you need to follow these steps:

1. Determine the interval length: b - a. In this case, it is 2 - (-2) = 4.
2. Write down the function, f(x) = 36 - x².
3. Find the integral of the function over the interval: ∫[-2, 2] (36 - x²) dx.
4. Divide the integral by the interval length: (1/4) × ∫[-2, 2] (36 - x²) dx.
5. Calculate the integral and simplify: (1/4) × [36x - (x³/3)]| from -2 to 2.
6. Substitute the interval limits and find the difference: (1/4) × [(72 - 8/3) - (-72 + 8/3)].
7. Calculate the result: (1/4) × (144 - 16/3) = 34.

Thus, the average value of the function f(x) = 36 - x² on the interval [-2, 2] is 34.

To know more about average value click on below link:

https://brainly.com/question/30858174#

#SPJ11

Find the area of the region bounded by the curves y = 1 − x 2 and y = x 2 − 1 from [ 0 , 1 ] .

Answers

The area of the region bounded by the curves y = 1 - x² and y = x² - 1 from [0, 1] is 4/3 square units.

To find the area of the region bounded by the curves y = 1 - x² and y = x² - 1 from [0, 1], we need to first identify the points of intersection between the curves. By setting y values equal, we get:

1 - x² = x² - 1
2 = 2x²
x² = 1
x = ±1

Since we're only concerned with the interval [0, 1], we can focus on the intersection point at x = 1. Next, we will set up an integral to calculate the area between the curves.

The area can be found by integrating the difference between the functions from 0 to 1:

Area = ∫(1 - x² - (x² - 1))dx from 0 to 1

Simplifying the integrand, we get:

Area = ∫(2 - 2x²)dx from 0 to 1

Now, we can integrate and evaluate:

Area = [2x - (2/3)x³] evaluated from 0 to 1

Area = (2(1) - (2/3)(1)³) - (2(0) - (2/3)(0)³) = 2 - (2/3) = 4/3

Thus, the area of the region bounded by the curves y = 1 - x² and y = x² - 1 from [0, 1] is 4/3 square units.

To know more about area, refer to the link below:

https://brainly.com/question/13252576#

#SPJ11

The journal Human Factors (1962, pp. 375-380) reports a study in which n=14 subjects were asked to parallel park two cars having very different wheel bases and turning radii. The time in seconds for each subject was recorded. From the pairs of observed differences, the sample average of the differences is calculated to be 1.21 and the sample standard deviation of the differences is calculated to be 1268. Suppose you wish to investigate the claim that the two types of cars have different levels of difficulty to parallel park. The test statistic you calculate for this test is 0.357, and the critical values are 1.771 and 1771. What is the appropriate decision for this hypothesis test? Reject the null hypothesis because 0.357 is in the critical region. Fail to reject the null hypothesis because 0.357 is in the critical region. Reject the null hypothesis because 0.357 is not in the critical region Fail to reject the null hypothesis because 0.357 is not in the critical region

Answers

The appropriate decision for this hypothesis test is to reject the null hypothesis because 0.357 is in the critical region.

Since the test statistic 0.357 falls within the critical region bounded by the critical values 1.771 and -1.771, we can reject the null hypothesis at the given significance level. Therefore, the appropriate decision for this hypothesis test is to reject the null hypothesis because 0.357 is in the critical region.

To know more about null hypothesis refer here:

https://brainly.com/question/28920252

#SPJ11

question 1 determine the interval of convergence of the following power series. (a) [infinity]∑ n=0 (x + 4)n √n 8n (b) [infinity]∑ n=0 (x + 4)2n √n 8n (c) [infinity]∑ n=0 (x + 4)3n √n 8n (d) [infinity]∑ n=0 (−1)nx2n (2n)!

Answers

(a) The interval of convergence is (-4-1/√2, -4+1/√2)

(b) The interval of convergence is (-4-1/√2, -4+1/√2)

(c) The interval of convergence is just -4

(d) The interval of convergence is (-∞, ∞).

What is the interval of convergence for the power series [infinity]∑ n=0 (x + 4)2n √n 8n?

In part (a), (b), and (c) of the question, we are asked to find the interval of convergence for power series of the form [infinity]∑ n=0 (x + 4)kn √n 8n, where k is 1, 2, or 3 respectively. In part (d), we are asked to find the interval of convergence for the power series [infinity]∑ n=0 (−1)nx2n (2n)!.

For part (a), (b), and (c), we can use the root test to find the interval of convergence. Applying the root test gives a radius of convergence of 1/8. To find the interval of convergence, we need to check the endpoints of the interval. Plugging in x = -4-1/√2 gives a convergent series, while plugging in x = -4+1/√2 gives a divergent series. T

herefore, the interval of convergence is (-4-1/√2, -4+1/√2) for parts (a) and (b). However, for part (c), plugging in x = -4 gives a convergent series, so the interval of convergence is just -4.

For part (d), we can use the ratio test to find the interval of convergence. Applying the ratio test gives a radius of convergence of infinity, meaning that the power series converges for all x. Therefore, the interval of convergence is (-∞, ∞).

Learn more about Interval of convergence

brainly.com/question/14394994

#SPJ11

Use the degree 2 Taylor polynomial centered at the origin for f to estimate the integral
I=∫20f(x)dx when f(x)=√4+x2
1.I≈42.I≈10/33.I≈16/34.I≈14/35.I≈6

Answers

To use the degree 2 Taylor polynomial centered at the origin for f, we first need to find the polynomial. The degree 2 Taylor polynomial for f centered at the origin is given by:

P(x) = f(0) + f'(0)x + (f''(0)/2)x^2

where f(0) = √4 = 2, f'(0) = 1/2(4+x)^(-1/2) evaluated at x=0 is 1/4 and f''(0) = (-1/2)(4+x)^(-3/2) evaluated at x=0 is -1/8.

So, we have:

P(x) = 2 + (1/4)x - (1/16)x^2

Now we can use P(x) to estimate the value of the integral I.

I = ∫20 f(x)dx ≈ ∫20 P(x)dx

= ∫20 (2 + (1/4)x - (1/16)x^2) dx

= 2x + (1/8)x^2 - (1/48)x^3 |[0,2]

= 4 + (1/2) - (1/12)

= 25/6

Therefore, I ≈ 25/6, which is closest to option (4) I ≈ 14/3.

To know more about taylor's polynomial refer here:

https://brainly.com/question/6203072?#

#SPJ11

let w be the subspace spannedby u1 and u2, and write y as the sum of a vector in w and a vector orthogonal to w the sum is y = y z where y = is in w and z = is orthogonal to w

Answers

Y can be written as the sum of y_proj and z, where y_proj is in W and z is orthogonal to W.

To write y as the sum of a vector in W and a vector orthogonal to W, we can use the following formula: y = y_proj + z, where y_proj is the projection of y onto W and z is orthogonal to W.

To find y_proj, we first need to find the projection of y onto u1 and u2, which are the basis vectors of W. Let's call these projections y_proj_u1 and y_proj_u2, respectively.

y_proj_u1 = (y • u1) / ||u1||² * u1
y_proj_u2 = (y • u2) / ||u2||² * u2

Next, we add these projections together to find y_proj:

y_proj = y_proj_u1 + y_proj_u2

Finally, we find the vector z orthogonal to W by subtracting y_proj from y:

z = y - y_proj

To know more about vector orthogonal click on below link:

https://brainly.com/question/28503609#

#SPJ11

Set up the iterated integral for evaluating over the given region D. a) D is the right circular cylinder whose base is the circle r = 3cos theta and whose top lies in the plane z = 5 - x. b) D is the solid right cylinder whose base is the region between the circles r = cos theta and r = 2cos theta and whose top lies in the plane 2 = 3 y.

Answers

a.  The iterated integral to evaluate over D is[tex]\int\limits^{2\pi}_0 \int\limits^{3 cos \theta }_0 \int\limits^{5 r cos \theta}_0 f(r, \theta, z) dz dr dtheta[/tex]

b. The iterated integral to evaluate over D is [tex]\int\limits^{\pi}_0 \int\limits^{ cos \theta }_{2 cos \theta} \int\limits^{2/3}_0 f(r, \theta, z) dz dr dtheta[/tex]

a) To set up the iterated integral for evaluating over the region D, we first need to determine the limits of integration for each variable. Since D is a right circular cylinder whose base is the circle r = 3cos(theta) and whose top lies in the plane z = 5 - x, we can express the limits of integration as follows:

For theta: 0 to 2π

For r: 0 to 3cos θ

For z: 0 to 5 - rcosθ

Therefore, the iterated integral to evaluate over D is:

[tex]\int\limits^{2\pi}_0 \int\limits^{3 cos \theta }_0 \int\limits^{5 r cos \theta}_0 f(r, \theta, z) dz dr dtheta[/tex]

b) To set up the iterated integral for evaluating over the region D, we first need to determine the limits of integration for each variable. Since D is a solid right cylinder whose base is the region between the circles r = cos(theta) and r = 2cos(theta) and whose top lies in the plane z = 3y, we can express the limits of integration as follows:

For theta: 0 to π

For r: cosθ to 2cos(θ

For y: 0 to 2/3

Therefore, the iterated integral to evaluate over D is:

[tex]\int\limits^{\pi}_0 \int\limits^{ cos \theta }_{2 cos \theta} \int\limits^{2/3}_0 f(r, \theta, z) dz dr dtheta[/tex]

Your question is incomplete but most probably your full question is attached below

Learn more about integral at https://brainly.com/question/22850902

#SPJ11

Determine convergence or divergence of the series using ratio or root test. Clearly identify the test used.[infinity]Σn=0 5^n/n!

Answers

The series ∑5^n/n! converges absolutely by the ratio test

What is the convergence or divergence of a series?

The ratio test is a convergence test that can be used to determine the convergence or divergence of a series of the form ∑a_n, where a_n is a sequence of non-zero real numbers. The test is based on the following idea: if the limit of the ratio of consecutive terms, lim(n → ∞) |a_(n+1)/a_n|, is less than 1, then the series converges absolutely; if the limit is greater than 1, then the series diverges; and if the limit is equal to 1 or does not exist, then the test is inconclusive.

To apply the ratio test to the series ∑5^n/n!, we first need to compute the limit of the ratio of consecutive terms:

r = lim(n → ∞) |5^(n+1)/(n+1)!| * |n!/5^n|

To simplify this expression, we can use the fact that n! = n(n-1)(n-2)...21 and 5^n = 55*...*5 (n times) have a common factor of 5, so we can cancel them out:

r = lim(n → ∞) |5/(n+1)|

Now, as n approaches infinity, the denominator of the fraction n+1 grows without bound, while the numerator remains fixed at 5. Therefore, the limit of the ratio is 0:

r = lim(n → ∞) |5/(n+1)| = 0

Since r is less than 1, we can conclude that the series ∑5^n/n! converges absolutely by the ratio test.

Learn more about convergence

brainly.com/question/31756849

#SPJ11

suppose a random variable T is exponential with λ=3. then the integral ∫143e−3tdt equals the probability that T will be between ____ and ____ . the expected value of T equals ______

Answers

To find the expected value of T, we use the formula E(T) = 1/λ. Plugging in λ=3, we get E(T) = 1/3. Therefore, the expected value of T is 1/3.

Suppose a random variable T is exponential with λ=3. To solve the integral, we first need to find the antiderivative of [tex]e^{(-3t)}[/tex], which is (-1/3) × [tex]e^{(-3t)}[/tex]. Plugging in the limits of integration, we get (-1/3) × [tex]e^{(-429)}[/tex] + (-1/3) × [tex]e^{(-429)}[/tex]. Simplifying this expression, we get 0.0029. This value represents the probability that T will be between 1 and 43.

Learn more about integration here:

https://brainly.com/question/29276807

#SPJ11

A sample of 15 randomly selected students has a grade point average of 2.86 with a deviation of 0.78. Construct a 90% confidence interval for the population mean.

Answers

To construct a 90% confidence interval for the population mean of grade point averages, we will use the given information: a sample size of 15 students, a sample mean of 2.86, and a standard deviation of 0.78.

First, we'll use the t-distribution, as the population standard deviation is unknown. For a 90% confidence level and a sample size of 15, the degrees of freedom will be 15 - 1 = 14. From the t-distribution table, the t-value for a 90% confidence level and 14 degrees of freedom is approximately 1.761.

Next, we calculate the standard error (SE) using the formula: SE = (sample standard deviation) / √(sample size). In this case, SE = 0.78 / √15 ≈ 0.201.

Now, we can construct the 90% confidence interval using the formula: (sample mean) ± (t-value * SE).

Lower limit: 2.86 - (1.761 * 0.201) ≈ 2.498
Upper limit: 2.86 + (1.761 * 0.201) ≈ 3.222

So, the 90% confidence interval for the population mean of grade point averages is approximately (2.498, 3.222).


If you want to learn more about confidence interval, click here:
https://brainly.com/question/17034620
#SPJ11

Suppose that a box contains five coins and that for each coin there is a different probability that a head will be obtained when the coin is tossed. Let p, denote the probability of a head when the ith coin is tossed (i 1, , 5), and suppose that p1 0, p2 1/4, p3 1/2, Suppose that one coin is selected at random from the box and when it is tossed once, a head is obtained. What is the posterior probability that the i th coin was a. selected (i-1, , 5)? b. If the same coin were tossed again, what would be the probability of obtaining another head c. If a tail had been obtained on the first toss of the selected coin and the same coin were tossed again, what would be the probability of obtaining a head on the second toss?

Answers

The posterior probabilities are:

P(B5 | A) = (1/5)(1) / (7/20) = 3/14

Let A denote the event that a head is obtained on the first toss, and let Bi denote the event that the ith coin was selected. We can use Bayes' theorem to find the posterior probabilities:

a) The prior probability of selecting each coin is 1/5. The probability of obtaining a head when each coin is tossed is given by the values of pi. Therefore, the prior probability of obtaining a head when a coin is selected is:

P(A) = (1/5) p1 + (1/5) p2 + (1/5) p3 + (1/5) p4 + (1/5) p5

Substituting the given values of pi, we get:

P(A) = (1/5)(0) + (1/5)(1/4) + (1/5)(1/2) + (1/5)(3/4) + (1/5)(1) = 7/20

The probability of selecting the ith coin and obtaining a head is given by the product of the prior probability of selecting the ith coin and the probability of obtaining a head when the ith coin is tossed:

P(A ∩ Bi) = (1/5) pi

Using Bayes' theorem, the posterior probability of selecting the ith coin given that a head was obtained is:

P(Bi | A) = P(A ∩ Bi) / P(A) = [(1/5) pi] / (7/20)

Therefore, the posterior probabilities are:

P(B1 | A) = 0

P(B2 | A) = (1/5)(1/4) / (7/20) = 1/7

P(B3 | A) = (1/5)(1/2) / (7/20) = 2/7

P(B4 | A) = (1/5)(3/4) / (7/20) = 3/14

P(B5 | A) = (1/5)(1) / (7/20) = 3/14

b) If the same coin were tossed again, the probability of obtaining another head would be equal to pi, the probability of obtaining a head when the ith coin is tossed. Therefore, the probability of obtaining a head on the second toss is:

P(head on second toss) = P(B1 | A) p1 + P(B2 | A) p2 + P(B3 | A) p3 + P(B4 | A) p4 + P(B5 | A) p5

Substituting the values of the posterior probabilities and pi, we get:

P(head on second toss) = (0) (0) + (1/7) (1/4) + (2/7) (1/2) + (3/14) (3/4) + (3/14) (1) = 37/112

c) If a tail had been obtained on the first toss of the selected coin, the posterior probabilities would be updated as follows:

P(tail on first toss) = (1 - P(A)) = 13/20

P(Bi | tail on first toss) = P(Bi ∩ tail on first toss) / P(tail on first toss)

The probability of selecting the ith coin and obtaining a tail is:

P(Bi ∩ tail on first toss) = (1/5) (1 - pi)

Substituting the given values of pi, we get:

P(B1 ∩ tail on first toss) = (1/5)(1)

P(B2 ∩ tail on first toss) = (1/5)(3

To know more about  probability refer here:

https://brainly.com/question/30034780

#SPJ11

At a cell phone assembly plant, 79% of the cell phone keypads pass inspection. A random sample of 103 keypads is analyzed. Find the probability that more than 83% of the sample keypads pass inspection

Answers

The probability that more than 83% of the sample keypads pass inspection is 0.052 or approximately 5.2%.

Given data:The percentage of cell phone keypads pass inspection = 79%Let X be the number of keypads that pass inspection out of a random sample of 103 keypads. Then X ~ Bin(103,0.79)We need to find the probability that more than 83% of the sample keypads pass inspection, which is equivalent to finding P(X > 0.83 × 103)Now we need to find the mean and standard deviation of XMean (μ) = np = 103 × 0.79 = 81.37Standard Deviation (σ) = √(npq) = √(103 × 0.79 × 0.21) = 4.32Now we standardize X using Z-score,Z = (X - μ)/σ = (0.83 × 103 - 81.37)/4.32 = 1.62Using standard normal distribution table, we can find the probability of Z > 1.62P(Z > 1.62) = 0.052So, the probability that more than 83% of the sample keypads pass inspection is 0.052 or approximately 5.2%.Therefore, the probability that more than 83% of the sample keypads pass inspection is 0.052 or approximately 5.2%.It took me around 103 words to answer this question.

Learn more about Percentage here,How do you find percentages?

https://brainly.com/question/24877689

#SPJ11

f the average value of the function f on the interval 1≤x≤4 is 8, what is the value of ∫41(3f(x)

Answers

The value of ∫41(3f(x)) is 69.

Given that the average value of the function f on the interval 1≤x≤4 is 8, we can use the formula for the average value of a function to obtain:

8 = (1/3)∫14 f(x) dx

Multiplying both sides by 3, we get:

24 = ∫14 f(x) dx

Now, we need to find the value of ∫41(3f(x)). We can use the substitution u = 4-x to change the limits of integration from [4,1] to [0,3]. Therefore,

∫41(3f(x)) dx = -3∫03 3f(4-u) du

Using the formula for the average value again, we get:

(1/3)∫14 f(x) dx = (1/3)∫03 f(4-u) du

Multiplying both sides by 3, we get:

∫14 f(x) dx = ∫03 f(4-u) du

Substituting this into the previous equation, we get:

∫41(3f(x)) dx = -3∫14 f(x) dx = -3(24) = -72

Therefore,

∫41(3f(x)) dx = 72 + C

where C is the constant of integration. To find C, we use the fact that the integral of 3f(x) over [1,4] is equal to the difference between the antiderivative of 3f(x) evaluated at x=4 and x=1, i.e.,

∫14 3f(x) dx = [3F(x)]^4_1 = 3F(4) - 3F(1)

where F(x) is an antiderivative of f(x). We know that the average value of f(x) on [1,4] is 8, so

24 = ∫14 f(x) dx = F(4) - F(1)

Therefore,

F(4) = 24 + F(1)

Substituting this into the previous equation, we get:

∫41(3f(x)) dx = 72 + 3F(1) - 3F(1) = 72

Therefore, the value of ∫41(3f(x)) is 69.

For more questions like Function click the link below:

https://brainly.com/question/16008229

#SPJ11

a relation r is said to be circular if arb and brc imply cra. show that r is reflexive and circular if and only if it is an equivalence relation.

Answers

We have shown that r is reflexive and circular if it is an equivalence relation by showing it is reflexive, symmetrical and has transitivity.

To prove that a relation r is reflexive and circular if and only if it is an equivalence relation, we need to show two things:

1. If r is reflexive and circular, then it is an equivalence relation.
2. If r is an equivalence relation, then it is reflexive and circular.

Let's start with the first part. If r is reflexive and circular, then it satisfies the following properties:

Reflexivity: For any a, aRa (that is, a is related to itself).
Circularity: If arb and brc, then cra.

To show that r is an equivalence relation, we need to prove that it satisfies the following three properties:

1. Reflexivity: For any a, aRa.
2. Symmetry: If aRb, then bRa.
3. Transitivity: If aRb and bRc, then aRc.

Reflexivity is already given, so we just need to show symmetry and transitivity.

For symmetry, suppose that aRb. Then by circularity, we have arb and bra. Since r is reflexive, we also have bRb. Combining these, we can apply circularity again to get bra and arc. Therefore, aRb implies bRa, and symmetry is satisfied.

For transitivity, suppose that aRb and bRc. Then by circularity, we have arb and brc, and by transitivity of r we have arc. Therefore, aRc, and transitivity is satisfied.

Thus, we have shown that r is an equivalence relation if it is reflexive and circular.

For the second part, suppose that r is an equivalence relation. Then it satisfies the following properties:

1. Reflexivity: For any a, aRa.
2. Symmetry: If aRb, then bRa.
3. Transitivity: If aRb and bRc, then aRc.

To show that r is reflexive and circular, we need to prove the following two properties:

1. Reflexivity: For any a, aRa.
2. Circular: If arb and brc, then cra.

Reflexivity is already given, so we just need to show circularity.

Suppose that arb and brc. Then by transitivity of r, we have arc. Since r is symmetric, we also have cra. Therefore, r is circular.

Thus, we have shown that r is reflexive and circular if it is an equivalence relation.

Learn more about equivalence relation here:

https://brainly.com/question/14307463

#SPJ11

According to the Current Population Report of the United States census, 36. 1% of people aged 25 to 34 have earned a bachelor's degree or higher. Suppose that Nancy works for the city of Peoria, AZ. City officials have asked her to estimate the proportion of people aged 25 to 34 in Peoria who have earned a bachelor's degree or higher. They have requested that her estimate have confidence level of 95% and a margin of error of 2%, or 0. 2. Determine the sample size i needed for the 95% confidence interval to be no more than 0. 2.

n=. People aged 25-34

Answers

Nancy would need a sample size of 25 individuals aged 25 to 34 in Peoria to estimate the proportion of people who have earned a bachelor's degree or higher with a 95% confidence level and a margin of error of no more than 0.2.

To determine the sample size needed for the 95% confidence interval to have a margin of error no more than 0.2, we can use the following formula:

n = (Z * σ / E)^2

Where:

n = sample size

Z = z-score corresponding to the desired confidence level (in this case, 95% confidence level)

σ = standard deviation of the population (unknown in this case)

E = margin of error

In this scenario, we do not have information about the standard deviation of the population (σ). However, we can use a conservative estimate by assuming a proportion of 0.5 (maximum variability), which gives the largest sample size required.

Using the formula with the maximum variability assumption:

n = (Z * σ / E)^2

n = (Z * 0.5 / 0.2)^2

To find the z-score corresponding to the 95% confidence level, we can refer to a standard normal distribution table or use a statistical software/tool. For a 95% confidence level, the z-score is approximately 1.96.

n = (1.96 * 0.5 / 0.2)^2

n = 4.9^2

n ≈ 24.01

Rounding up to the nearest whole number, the sample size needed would be 25.

To know more about confidence level refer here:

https://brainly.com/question/30229866#

#SPJ11

Identify the surface defined by the following equation.x2+y2+8z2+14x=−48

Answers

The given equation, x^2 + y^2 + 8z^2 + 14x = -48, can be rewritten by completing the square for the x-terms as (x+7)^2 - 49 + y^2 + 8z^2 = 1. This simplifies to (x+7)^2/1 + y^2/8 + z^2/1/8 = 1, which is the equation of an ellipsoid.

The center of the ellipsoid is at (-7, 0, 0), and the semi-axes lengths along the x, y, and z directions are 1, sqrt(8), and 1/sqrt(8), respectively.

An ellipsoid is a three-dimensional shape that looks like a stretched sphere. It is defined as the set of all points in three-dimensional space whose distance from a fixed point (the center) is proportional to the distances from the center along three perpendicular axes (the semi-axes). In this case, the center is (-7, 0, 0), and the semi-axes lengths are 1, sqrt(8), and 1/sqrt(8). \

The ellipsoid is centered along the x-axis and stretched in the y and z directions.

Learn more about equation here:

https://brainly.com/question/29657983

#SPJ11

Collin did the work to see if 10 is a solution to the equation StartFraction r Over 4 EndFraction = 2. 5. StartFraction r Over 4 EndFraction = 2. 5. StartFraction 10 Over 4 EndFraction = 2. 5. 2. 5 = 2. 5. Is 10 a solution to the equation?

Yes, because 10 and 4 are both even. Yes, because if you substitute 10 for r in the equation and simplify, you find that the equation is true. No, because 10 is not divisable by 4. No, because if you substitute 10 for r in the equation and simplify, you find that the equation is not true

Answers

Yes, 10 is a solution to the equation because if you substitute 10 for r in the equation and simplify, you find that the equation is true.

To determine if 10 is a solution to the equation StartFraction r Over 4 EndFraction = 2.5, we substitute 10 for r and simplify the equation.

When we substitute 10 for r, we have StartFraction 10 Over 4 EndFraction = 2.5.

Simplifying this expression, we have 2.5 = 2.5.

Since the equation is true when we substitute 10 for r, we can conclude that 10 is indeed a solution to the equation.

The other options provided do not accurately reflect the situation. The fact that 10 and 4 are both even or that 10 is not divisible by 4 does not affect whether 10 is a solution to the equation. The only relevant factor is whether substituting 10 for r in the equation results in a true statement, which it does in this case.

Therefore, the correct answer is Yes, because if you substitute 10 for r in the equation and simplify, you find that the equation is true.

Learn more about equation here:

https://brainly.com/question/12974594

#SPJ11

what is the smallest value that ℓ may have if vector l is within 3.9° of the z axis?

Answers

If the vector ℓ is within 3.85° of the z axis, then the smallest value that ℓ may have is 1.[1]

The possible values for the quantum number m are integers ranging from -ℓ to ℓ in steps of 1. Therefore, given ℓ, there are 2ℓ + 1 possible values for m.[2]

Since the question only asks for the smallest value that ℓ may have, we can't say for certain that 1 is the only possibility. However, based on the information given, 1 is the smallest possible value for ℓ in this scenario.

Therefore, the smallest value that ℓ may have if vector l is within 3.9° of the z axis is 1.

To know more about vectors refer here :

https://brainly.com/question/22819767#

#SPJ11

Question 6


A manufacturer is doing a quality control check of the laptops it produces. Out of a random sample of 145 laptops taken off the production lino, 6 are defective. Which of those statements


Choose all that are correct.


A


Tho percentage of defective laptops for a random sample of 290 laptops is likely to be twice as high as that of the original samplo.


B


It is not a reasonable estimate that 10% of all laptops produced will be defectivo.


It is not a reasonable estimate that 0. 5% of all laptops produced will be defective.


D


The percentage of defectivo laptops across additional random samples of 145 laptops


likely to vary greatly


E


It is a reasonable estimate that 4% of all laptops produced are defective.

Answers

The percentage of defective laptops in a random sample of 290 is likely to be close to twice as high as the percentage in the original sample of 145. The correct option is a.

In the original sample of 145 laptops, 6 were found to be defective. To determine the percentage of defective laptops, we divide the number of defective laptops by the total number of laptops in the sample and multiply by 100. In this case, the percentage of defective laptops in the original sample is (6/145) * 100 ≈ 4.14%.

Now, if we take a random sample of 290 laptops, we can expect the number of defective laptops to increase proportionally. If we assume that the proportion of defective laptops remains constant across different samples, we can estimate the expected number of defective laptops in the larger sample. The estimated number of defective laptops in the sample of 290 would be (4.14/100) * 290 ≈ 12.01.

Therefore, the percentage of defective laptops in the larger sample is likely to be close to (12.01/290) * 100 ≈ 4.14%, which is approximately twice as high as the percentage in the original sample. However, it's important to note that this is an estimate, and the actual percentage may vary due to inherent sampling variability.

Learn more about proportionally here:

https://brainly.com/question/8598338

#SPJ11

An order of complexity that is worse than polynomial is called quadratic.A. TrueB. False

Answers

An order of complexity that is worse than polynomial is called quadratic is B. False.
An order of complexity that is worse than polynomial is not called quadratic.

A polynomial function is a function that can be expressed as the sum of finite terms, where each term is a constant multiplied by a variable raised to a non-negative integer power.

A quadratic function is a type of polynomial function of degree 2, meaning the highest power of the variable is 2. The order of complexity of an algorithm is a measure of the amount of time or space required by the algorithm to solve a problem, expressed in terms of the input size of the problem.

An algorithm with a polynomial time complexity has an execution time that grows at most as a polynomial function of the input size.

An algorithm with an exponential time complexity has an execution time that grows exponentially with the input size, and an algorithm with a factorial time complexity has an execution time that grows as a factorial of the input size.

Therefore, an order of complexity that is worse than polynomial is usually referred to as exponential or factorial complexity, not quadratic. Understanding the order of complexity of an algorithm helps us understand how well an algorithm will scale as the input size grows.

Learn more about order of complexity:

https://brainly.com/question/30490723

#SPJ11

Allison has a part-time job at an ice skating rink selling hot cocoa. She decided to plot the number of hot cocoas she sold relative to the day's high temperature and then draw the line of best fit. What does the line's y-intercept represent?

Answers

The Y intercept tells us of the number of the cocoas soald based on the temperature

How to determine the y intercept

In the context of Allison's plot of hot cocoas sold relative to the day's high temperature, the y-intercept of the line of best fit represents the value of the dependent variable (number of hot cocoas sold) when the independent variable (day's high temperature) is zero.

The y-intercept helps establish the initial starting point of the line's slope and can provide insights into the general behavior of the relationship between the two variables.

Read more on y intercept https://brainly.com/question/25722412

#SPJ1

The inverse of f(x)=1+log2(x) can be represented by the table displayed.

Answers

The inverse of the function f(x) = 1 + log2(x) can be represented by the given table. The table shows the values of x and the corresponding values of the inverse function f^(-1)(x).

To find the inverse of a function, we switch the roles of x and y and solve for y. In this case, the function f(x) = 1 + log2(x) is given, and we want to find its inverse.

The table represents the values of x and the corresponding values of the inverse function f^(-1)(x). Each value of x in the table is plugged into the function f(x), and the resulting value is recorded as the corresponding value of f^(-1)(x).

For example, if the table shows x = 2, we can calculate f(2) = 1 + log2(2) = 2, which means that f^(-1)(2) = 2. Similarly, for x = 4, f(4) = 1 + log2(4) = 3, so f^(-1)(3) = 4.

By constructing the table with different values of x, we can determine the corresponding values of the inverse function f^(-1)(x) and represent the inverse function in tabular form.

Learn more about inverse here:

https://brainly.com/question/30339780

#SPJ11

Assume that the variable x has the value 55. Use an assignment statement to increment the value of x by 1.

Answers

The assignment statement "x = x + 1" means to take the current value of the variable x, add 1 to it, and then store the result back in the variable x.

So, if the initial value of x is 55, the expression "x + 1" evaluates to 56, and this new value is then assigned to the variable x. Therefore, the new value of x after executing the assignment statement would be 56.

In mathematics, you can represent an increment of 1 on the variable x by using the following equation:

x = x + 1

So, if the initial value of x is 55, after executing this assignment statement, the new value of x would be 56.

To know more about variable,

https://brainly.com/question/2466865

#SPJ11

give an example of a group g and subgroups h and k such that hk 5 {h [ h, k [ k} is not a subgroup of g.

Answers

We can say that HK is not closed under inverses and hence is not a subgroup of G

Let G be the group of integers under addition (i.e., G = {..., -2, -1, 0, 1, 2, ...}), and let H and K be the following subgroups of G:

H = {0, ±2, ±4, ...} (the even integers)

K = {0, ±3, ±6, ...} (the multiples of 3)

Now consider the product HK, which consists of all elements of the form hk, where h is an even integer and k is a multiple of 3. Specifically:

HK = {0, ±6, ±12, ±18, ...}

Note that HK contains all the elements of H and all the elements of K, as well as additional elements that are not in either H or K. For example, 6 is in HK but not in H or K.

To show that HK is not a subgroup of G, we need to find two elements of HK whose sum is not in HK. Consider the elements 6 and 12, which are both in HK. Their sum is 18, which is also in HK (since it is a multiple of 6 and a multiple of 3). However, the difference 12 = 18 - 6 is not in HK, since it is not a multiple of either 2 or 3.

Therefore, HK is not closed under inverses and hence is not a subgroup of G

To know more about subgroup refer here

https://brainly.com/question/31611800#

#SPJ11

prove that f(x)={2−xif x≤11xif x>1 is one-to-one but not onto r.

Answers

The function f(x) = {2 - x if x ≤ 1, x if x > 1} is one-to-one but not onto.

To prove that a function f(x) is one-to-one but not onto, we need to show that it satisfies the following conditions:

One-to-one: For any two different values x1 and x2 in the domain, if f(x1) ≠ f(x2), then x1 ≠ x2.

Not onto: There exists at least one value y in the codomain that is not the image of any value x in the domain.

Let's analyze the function f(x) = {2 - x if x ≤ 1, x if x > 1}.

One-to-one:

To show that f(x) is one-to-one, we need to demonstrate that if f(x1) ≠ f(x2), then x1 ≠ x2.

Consider two different values x1 and x2 in the domain such that f(x1) ≠ f(x2).

If both x1 and x2 are less than or equal to 1, then f(x1) = 2 - x1 and f(x2) = 2 - x2. Since x1 and x2 are different, f(x1) and f(x2) will also be different. Therefore, x1 ≠ x2.

If both x1 and x2 are greater than 1, then f(x1) = x1 and f(x2) = x2. Since x1 and x2 are different, f(x1) and f(x2) will also be different. Therefore, x1 ≠ x2.

If one value is less than or equal to 1 and the other is greater than 1, then f(x1) = 2 - x1 and f(x2) = x2. In this case, f(x1) and f(x2) will always be different because 2 - x1 will never be equal to x2. Therefore, x1 ≠ x2.

In all cases, we have shown that if f(x1) ≠ f(x2), then x1 ≠ x2. Hence, f(x) is one-to-one.

Not onto:

To show that f(x) is not onto, we need to find at least one value y in the codomain that is not the image of any value x in the domain.

The codomain of f(x) is the set of all real numbers. Let's consider the value y = 3. No matter what value of x we choose from the domain, the function f(x) will never be equal to 3. Therefore, there is no x in the domain such that f(x) = 3.

Since we have found a value y (3) in the codomain that is not the image of any value x in the domain, we can conclude that f(x) is not onto.

Know more about function f(x) here:

https://brainly.com/question/13461298

#SPJ11

Substitute 1 in for x and evaluate:


7x - 6(3 + 2x)

Answers

Using PEDMAS to evaluate the given expression, the value is -23

What is the value of the expression?

To substitute 1 in for x and evaluate the expression 7x - 6(3 + 2x), we replace every instance of x with 1 and simplify the expression.

Starting with the expression: 7x - 6(3 + 2x)

We substitute x with 1: 7(1) - 6(3 + 2(1))

Simplifying the inner parentheses: 7 - 6(3 + 2)

Continuing the simplification: 7 - 6(5)

Further simplification: 7 - 30

Finally, performing the subtraction: -23

Therefore, when we substitute 1 in for x, the value of the expression 7x - 6(3 + 2x) is -23.

In this evaluation, we followed the order of operations PEMDAS by simplifying the parentheses first, then performing the multiplication and subtraction to obtain the final result of -23.

Learn more on evaluating a function here;

https://brainly.com/question/2284360

#SPJ4

Alexey is baking 2 batches of cookies. Since he tends to be quite forgetful, there's a good chance he might burn


the cookies, and then they won't come out tasty. Each batch is independent, and the probability of his first batch


being tasty is 50%, and the probability of his second batch being tasty is 70%.

Answers

Alexey is baking two batches of cookies. The probability of the first batch being tasty is 50%, while the probability of the second batch being tasty is 70%. Whether he burns the cookies or not is not explicitly stated.

Alexey's baking of the two batches of cookies is treated as independent events, meaning the outcome of one batch does not affect the other. The probability of the first batch being tasty is given as 50%, indicating that there is an equal chance of it turning out well or not. Similarly, the probability of the second batch being tasty is stated as 70%, indicating a higher likelihood of it being delicious.

The question does not provide information about the probability of burning the cookies. However, if Alexey's forgetfulness and the possibility of burning the cookies are taken into consideration, it is important to note that burning the cookies could potentially affect their taste and make them less enjoyable. In that case, the probabilities mentioned earlier could be adjusted based on the likelihood of burning. Without further information on the probability of burning, it is not possible to calculate the overall probability of both batches being tasty or the impact of burning on the tastiness of the cookies.

Learn more about probability here:

https://brainly.com/question/32117953

#SPJ11

if there is no relationship between number of cars and community type, the expected number of suburban residences with two cars is: 684.325. 710.765. 651.445. 587.375.

Answers

The expected number of suburban residences with two cars is: 684.325.

To explain, when there's no relationship between the number of cars and community type, the expected number is calculated using the overall proportion of residences with two cars in the population.

You would first calculate the proportion of all residences with two cars and then multiply that proportion by the total number of suburban residences.

The resulting number represents the expected count of suburban residences with two cars if there is no association between the number of cars and community type. In this case, the calculation leads to an expected number of 684.325 suburban residences with two cars.

To know more about proportion click on below link:

https://brainly.com/question/7096655#

#SPJ11

Other Questions
Carla Vista Co. has the following balances in selected accounts on December 31, 2022. Carla Vista has a calendar year end.Accounts Receivable $ 0Accumulated DepreciationEquipment 0Equipment 6,300Interest Payable 0Notes Payable 11,100Prepaid Insurance 2,316Salaries Payable 0Supplies 2,260Unearned Revenue 27,000List of AccountsPrepare the appropriate subsequent cash entries. (Credit account titles are automatically indented when the amount is entered. Do not indent manually. If no entry is required, select "No Entry" for the account titles and enter 0 for the amounts.) For each of the scenarios described below, state whether you think they indicate passive, active, or evocative genotype-environment correlation.a. Mean cognitive ability scores of members of the school chess team were found to be higher than mean scores of a random sample of their peers.b. The correlation between measures of the family environment and children's cognitive ability scores was found to be higher in nonadoptive families compared to adoptive families.c. Adoptees of biological parents with high scores for antisocial personality measures were found to have adoptive parents who were more negative in their parenting than control adoptees.d. Children who scored poorly on standard tests in a school were chosen to receive special attention in order to increase their scores. WILL GIVE BRAINLIEST!!!! Find the unique integer n such that all these conditions hold:(a) 0 < n < 200(b) n is 1 more than a multiple of 2(c) n is 3 more than a multiple of 7(d) n is 10 more than a multiple of 13 The advertising agency promoting a new product is hoping to get the best possible exposure in terms of the number of people the advertising reaches. The agency will use a two-pronged approach: focused Internet advertising, which is estimated to reach 200,000 people for each burst of advertising, and print media, which is estimated to reach 80,000 people each time an ad is placed. The cost of each Internet burst is $3,000, as opposed to only $900 for each print media ad. It has been agreed that the number of print media ads will be no more than five times the number of Internet bursts. The agency hopes to launch at least 5 and no more than 15 Internet bursts of advertising. The advertising budget is $75,000. Given these constraints, what is the most effective advertising strategy the error message that alerts us that we are accidentally trying to divide a number by zero is People who have biased beliefs about group members that are not based on direct experience and firsthand knowledge or have irrational feelings of dislike and even hatred for certain groups would be classified as:________ a distributed request allows a single sql statement to refer to tables in more than one remote dbms. group of answer choices true false During a recession, people drop out of the labor force because they are unable to find a job. All else the same, thisA) increases the official U-3 unemployment rate. B) decreases the official U-3 unemployment rate. C) does not change the official U-3 unemployment rate . D) increases the official U-3 unemployment rate and the labor force participation rate. Credit analysts are likely to consider a company's credit quality to be improving if the company reduces its: debt to equity ratio. cash ratio. scale and diversification, Stacy Persoff is the newly hired assistant controller of Kemp Industries, a regional supplier of hardwood derivative products. The company sponsors a defined benefit pension plan that covers its 420 employees. On reviewing last year's financial statements, Persotf was concemed about some items reported in the disclosure notes relating to the pension plan Portions of the relevant note follow Note 8: Pensions The company has a defined benefit pension plan covering substantially all of its employees. Pension benefits are based on employee service years and the employee's compensation during the last two years of employment. The company contributes annually the maximum amount permitted by the federal tax code. Plan contributions provide for benefits expected to be eamed in the future as well as those earned to date. The following reconciles the plan's funded status and amount recognized in the balance sheet at December 31, 2018 (5 in thousands) Actuarial Present Value Benefit Obligations: Accumulated benefit obligation (including vested benefits of 5318) $(1.305 Projected benefit obligation (1.800) Plan assets at fair value 1.575 Projected benefit obligation in excess of plan assets 5 (225 Kemp's comparative income statements reported net periodic pension expense of S108,000 in 2018 and 586,520 in 2017. Since employment has remained fairly constant in recent years, Persotf expressed concern over the increase in the pension expense. She expressed her concem to you, a three-year senior accountant at Kamp. "I'm also interested in the differences in these liability measurements," she mentioned Required: Write a memo to Persoft. In the memo, do the following: 1. Explain to Persoff how the composition of the net periodic pension expense can create the situation she sees Briefly describe the components of pension expense. fill in the table with the corresponding expected counts, e i if you rolled a fair die n = 1350 times. the null hypothesis for this scenario is h 0 : p 1 = p 2 = p 3 = p 4 = p 5 = p 6 .= 750 index i 1 2 3 4 5 6 ei Use crystal field theory to predict the unpaired elections for the following and determine the magnetic moments (spin-only): (a) [Co(HO)6]+ (b) [Cr(HO)6]+ (c) [Fe(CN)6]- (d) [Fe(CO);] to what volume should you dilute 50 ml of a 12 m stock hno3 solution to obtain a 0.137 hno3 solution? Which of the following is true about the molecular structure of voltage-gated sodium channels?A.They are single polypetide chains with 4-6 heterologous subunits (alpha helices) and a voltage sensor on the S5 segmentB.The subunits are single polypeptide chains organized in four homologous domains, which each contain six transmembrane alpha helices (S1S6) and an additional pore loop located between the S5 and S6 segmentsC.The subunits are comprised of 4 heterologous subunits that are connected by a pore loop located between the S5 and S6 segments.D.The pore-forming subunit is accompanied by 1 or 2 -subunits which modulate channel gating and localization of the channel in the membrane.E.The presence of a -subunit means that the channel has an inactivation gate, which blocks the channels according to a "ball-and-chain" model. Channels without -subunits have properties of "persistent sodium currents" that do not inactivateF.Answers B and D are true You are comparing financial aid offers. One has offered you $8,000 in grants; $5,000 in scholarships; $3,000 in work study; and $14,000 in loans. How much of this is considered "free money"? $8,000 $5,000 $13,000 $14,000 $16,000 use spherical coordinates to evaluate the triple integral -2 to 2, 0 to sqrt 4-y^2, -sqrt 4 - x^2 - y^2 Impulse involves the time that a force acts, whereas work involves the Select one: O a. acceleration that a force produces. O b. distance that a force acts. O c. time and distance that a force acts. O d. distance and velocity that a force acts russian national guard, about 300,000 troops at the presidents personal disposal, was created for the specific purpose of putting down mass revolts in russia. when was the guard created? in the contingency table we have (r - 1) times (c - 1) degrees of freedom (r is the number of rows and c is the number of columns). true false Which of the following statements is most consistent with coaching (as opposed to counseling)?A) "I'd like to see you work on your attitude. You are often too pessimistic."B) "Would you like to talk with me about the interpersonal conflict you are having with your supervisor?"C) "Let's plan some time tomorrow for me to walk you through the audit process. I think I can help you see where you are making mistakes."D) "I'm concerned that you seem to be growing less committed to the mission of our organization. Why don't you spend a little more time with our customers so that you can reignite your passion?"