Answer:
+ 900 J
Explanation:
Since the total energy change ΔE = internal energy change ΔU since there is no change in kinetic and potential energy,
ΔE = ΔU
ΔE = Q - W where Q = heat absorbed by system and W = work done by system
Now since the system absorbs 500 J of heat, Q = + 500 J and work of 400 J is done on the system, W = -400 J
So, the values of the variables into the equation, we have
ΔE = Q - W
ΔE = + 500 J - (-400 J)
ΔE = + 500 J + 400 J
ΔE = + 900 J
So, the internal energy change, ΔE = + 900 J
If the temperature stays constant, which change would decrease the amount
of thermal energy in an object?
A. Decreasing its density
B. Increasing its velocity
c. Decreasing its mass
D. Increasing its mass
A car on the roller coaster begins with 0j of kinetic energy and 12,928j of potential energy and finishes the track with 3,715j of potential energy. How much kinetic energy dose the car finish with????
Answer:
9213 J
Explanation:
Change in Kinetic energy = Change in Potential energy
= 12,928J - 3715J
=9213 J
For more assistance: +1 (304) 223-3136
write two units for electric field intensity and show thier equivalence?
Answer:
Electric field intensity is the force experienced by a test charge q in a electric field E.
Answer:
hope it helps...
Explanation:
The SI unit of the electric field is volts per meter (V/m). This unit is equivalent to Newton's per coulomb. These are derived units where Newton is a unit of force and Coulomb is the unit of charge
Aluminium has a specific heat capacity of 900 J/(kg°C).
The internal energy of a 2.0kg block of aluminium increases by 13500 j.
By how much does the temperature of the block increase?
B 0.13°C
C 7.5°C
A
0.067 °C
D 15°C
Answer:
24300000K
Explanation:
Q=mc(change in temperature)
900X2.0=1800.0
1800.0X13500= 24300K
According to specific heat capacity, the temperature of the block increases by 7.5°C.
What is specific heat capacity?Specific heat capacity is defined as the amount of energy required to raise the temperature of one gram of substance by one degree Celsius. It has units of calories or joules per gram per degree Celsius.
It varies with temperature and is different for each state of matter. Water in the liquid form has the highest specific heat capacity among all common substances .Specific heat capacity of a substance is infinite as it undergoes phase transition ,it is highest for gases and can rise if the gas is allowed to expand.
It is given by the formula ,
Q=mcΔT
Substitute values in above formula ,Δt=Q/mc=13500/2×900=7.5°C.
Thus, the temperature of the block increases by 7.5°C.
Learn more about specific heat capacity,here:
https://brainly.com/question/29766819
#SPJ2
If ATM is 102 kPa, what force does the atmosphere exert on the palm of your hand which has an area of 0.016 meters?
Answer:
Force = 1.632 Newton
Explanation:
Given the following data;
Pressure = 102 kPa
Area = 0.016 m²
To find what force the atmosphere exert on the palm of your hand;
Mathematically, pressure is given by the formula;
[tex] Pressure = \frac {Force}{area} [/tex]
Force = 102 * 0.016
Force = 1.632 Newton
Identify the reactants in the combustion of methane: CH4 + O2 CO2 + O°H
A string of length 3m and total mass of 12g is under a tension of 160N. A transverse harmonic wave with wavelength 25cm and amplitude 2cm travels to the right along the string. It is observed that the displacement at x=0 at t=0 is 0.87cm. a) What is the wave? b) Wrote the wave function, y(x,t) c) Find the particle velocity at position x=0 at time t=10s. What is the maximum particle velocity?
Answer:
What is the answer bro idont now
Explain why the wave model of light cannot explain the energy emissions from a blackbody
radiator, but the particle model of light can.
HELP MEEE ASAP
Answer:
As the temperature decreases, the peak of the black-body radiation curve moves to lower intensities and longer wavelengths. The black-body radiation graph is also compared with the classical model of Rayleigh and Jeans.
So as you see the wavelengths are in the x axis so all wavelengths are covered.
Black-body radiation provides insight into the thermodynamic equilibrium state of cavity radiation. If each Fourier mode of the equilibrium radiation in an otherwise empty cavity with perfectly reflective walls is considered as a degree of freedom capable of exchanging energy, then, according to the equipartition theorem of classical physics, there would be an equal amount of energy in each mode. Since there are an infinite number of modes this implies infinite heat capacity (infinite energy at any non-zero temperature), as well as an unphysical spectrum of emitted radiation that grows without bound with increasing frequency, a problem known as the ultraviolet catastrophe. Instead, in quantum theory the occupation numbers of the modes are quantized, cutting off the spectrum at high frequency in agreement with experimental observation and resolving the catastrophe. The study of the laws of black bodies and the failure of classical physics to describe them helped establish the foundations of quantum mechanics.
The above explains why the classical assumptions lead to a wrong spectrum.
Explanation:
i don't know if It helps you..parang Ang layo naman Ng sagot ko sa tanong mo
The wave model of light cannot explain the energy emissions from a blackbody radiator, but the particle model of light can be because the electromagnetic wave theory does not explain the black body radiation and the particle model of light can explain it.
What is Black body radiation?Black body radiation is defined as the surface which absorbs all the energy and radiant light falling on it because it absorbs all light of color.
An example of black body radiation is a cavity with a small hole in it.
What is an Electromagnetic Wave ?The Electromagnetic Wave is also called EM Waves which is defined as the waves that are created as a vibration between a magnetic field and electric field.
What is Light ?Light is defined as the electromagnetic radiation which propogates as waves and allows us to make the object visible.
Learn more about the Black Body here: https://brainly.com/question/28887620
#SPJ2
Một ô tô khối lượng một tấn chuyển động trên một đường nằm ngang. Hệ số ma sát giữa bánh ô tô và mặt đường là 0,07. Gia tốc trọng trường g=9,8m/s2
a) vẽ và xác định tên các lực tác động lên vật. Viết phương trình chuyển động của vật.
b) nếu ô tô chuyển động đều, xuống dốc có độ dốc 5%. Tính lực kéo của ô tô.
c) nếu ô tô chuyển động đều. Lên dốc có độ dốc 5%. Tính lực kéo của động cơ ô tô
Answer: B
Explanation: because B
A 620 N physics student stands on a bathroom scale in an elevator that is supported by a cable. The combined mass of student plus elevator is 870 kg. As the elevator starts moving, the scale reads 450 N.
Required:
a. Find the acceleration of the elevator (magnitude and direction).
b. What is the acceleration if the scale reads 670 N?
c. If the scale reads zero, should the student worry? Explain.
d. What is the tension in the cable in parts (a) and (c)?
Answer:
(a) 9.28 m/s2
(b) 9.03 m/s2
(c) 9.8 m/s2
(d) 450 N, 670 N
Explanation:
mass of elevator + student, m = 870 kg
Reading of scale, R = 450 N
(a) When the elevator goes down, the weight decreases.
Let the acceleration is a.
By the Newton's second law
m g - R = m a
870 x 9.8 - 450 = 870 a
a = 9.28 m/s2
(b) R = 670 N
Let the acceleration is a.
870 x 9.8 - 670 = 870 a
a = 9.03 m/s2
(c) If the scale reads zero, it mean the elevator is falling freely. The acceleration is downwards and its value is 9.8 m/s2.
(d) Tension in cable is 450 N and 670 N.
If R1 and R2 are in parallel and R3 is in series with them then equivalent resistance will be
Answer:
Refer to the attachment!~
Two uncharged metal spheres, spaced 25.0 cm apart, have a capacitance of 26.0 pF. How much work would it take to move 12.0 nC of charge from one sphere to the other? Answer in Joules.
Answer:
[tex]W=2.76\times 10^{-6}\ J[/tex]
Explanation:
Given that,
The distance between two spheres, r = 25 cm = 0.25 m
The capacitance, C = 26 pF = 26×10⁻¹² F
Charge, Q = 12 nC = 12 × 10⁻⁹ C
We need to find the work done in moving the charge. We know that, work done is given by :
[tex]U=\dfrac{Q^2}{2C}[/tex]
Put all the values,
[tex]U=\dfrac{(12\times 10^{-9})^2}{2\times 26\times 10^{-12}}\\\\U=2.76\times 10^{-6}\ J[/tex]
So, the work done is [tex]2.76\times 10^{-6}\ J[/tex].
What must be the same for any two resistors that are connected in a series
What must a scientist do in order to develop a testable hypothesis?
A. Identify a conclusion that provides the most popular explanation
for the question.
B. Determine whether experimental observations can provide
evidence to support a conclusion.
C. Copy the opinions of other scientists with similar questions.
D. Survey the preferences of other scientists who have done similar
research.
The correct answer is option B. Determine whether experimental observations can provide evidence to support a conclusion.
1. Identify the research question: Begin by clearly defining the question or problem that you want to investigate. This question should be specific and focused, allowing for clear hypotheses to be developed.
2. Conduct background research: Familiarize yourself with existing knowledge and previous research related to your question. This step will help you understand the current state of knowledge in the field and identify any gaps or areas that require further investigation.
3. Formulate a hypothesis: Based on your background research, develop a hypothesis that proposes a possible explanation or answer to your research question. A hypothesis should be a clear statement that can be tested through experimentation or observation. It should be specific, measurable, and falsifiable, meaning that it can be proven wrong if the evidence does not support it.
4. Design experiments or observations: Once you have formulated a hypothesis, consider the experimental or observational methods that can be used to test it. Determine what data you need to collect, what variables you need to manipulate or measure, and what controls should be put in place to ensure the validity of your results.
5. Predict outcomes: Based on your hypothesis, make predictions about the expected outcomes of your experiments or observations. These predictions should be derived from your hypothesis and should be specific enough to be tested.
6. Conduct the experiment or observation: Carry out the planned experiments or observations, ensuring that you collect and record data accurately. Implement proper controls and procedures to minimize any biases or confounding factors that could affect the results.
7. Analyze the data: Once you have collected the data, analyze it using appropriate statistical or analytical methods. Evaluate whether the data supports or contradicts your hypothesis and predictions.
8. Draw conclusions: Based on the analysis of your data, draw conclusions about whether the evidence supports or refutes your hypothesis. Clearly state the findings and discuss their implications in the context of the research question.
9. Communicate the results: Share your findings with the scientific community through scientific papers, presentations, or other appropriate means. Allow other scientists to review and replicate your work, fostering further discussion and advancement in the field.
Remember, the scientific process is iterative, and developing a hypothesis is just the starting point. Scientists continuously refine and revise their hypotheses based on new evidence and insights gained from their experiments and observations.
For more such questions on observations , click on:
https://brainly.com/question/16846001
#SPJ8
A steel cable lying flat on the floor drags a 20 kg block across a horizontal, frictionless floor. A 100 N force applied to the cable causes the block to reach a speed of 4.2 m/s in a distance of 2.0 m.
What is the mass of the cable?
Answer:
m_cable = 2,676 kg
Explanation:
For this exercise we must look for the acceleration with the kinematic ce relations
v² = v₀² + 2 a x
since the block starts from rest, its initial velocity is vo = 0
a = v² / 2x
a = 4.2² /(2 2.0)
a = 4.41 m / s²
now we can use Newton's second law
Note that the mass that the extreme force has to drag is the mass of the block plus the mass of the cable.
F = (m + m_cable) a
m_cable = F / a -m
m_cable = 100 / 4.41 - 20
m_cable = 2,676 kg
An object is 70 micrometer long and 47.66 micrometer wide. How long and wide is the object in km
Answer:
The length of the object in kilometer (km) is 70 x 10⁻⁹ km
The width of the object in kilometers (km) is 47.66 x 10⁻⁹ km
Explanation:
Given;
length of the object = 70 micrometer = 70 μm
the width of the object = 47.66 micrometer = 47.66 μm
The length of the object in meter:
70 micrometer = 70 μm = 70 x 10⁻⁶ m
The length of the object in kilometer (km):
70 x 10⁻⁶ m = 70 x 10⁻⁹ km
The width of the object in meters:
47.66 micrometer = 47.66 μm = 47.66 x 10⁻⁶ m
The width of the object in kilometers (km):
47.66 x 10⁻⁶ m = 47.66 x 10⁻⁹ km
A 15-cm-focal-length converging lens is 19 cm to the right of a 6.0-cm-focal-length converging lens. A 1.0-cm-tall object is distance L to the left of the 6.0-cm-focal-length lens.
Required:
For what value of L is the final image of this two-lens system halfway between the two lenses?
Answer:
L = 11.014 cm
Explanation:
Halfway between the two lenses is 19/2 = 9.5 cm.
Thus, this means virtually with respect to lens, the final image is at -9.5 cm
Thus, from here, we will work this out backwards.
Let's first solve for the initial position of the object for the second lens;
(1/S2) + (1/s'2) = (1/f2)
Where s'2 is the real image.
F2 is focal length
Thus;
(1/s'2) = (1/f2) - (1/s2)
(1/s'2) = (1/15) - (1/-9.5)
(1/s'2) = 0.1719
s'2 = 5.82 cm
The object for the second lens is located at 5.82 cm in front of the second lens.
Now, The object for the second lens and the image for the first lens will be the same.
This means the distance of the image from the first lens is at; 19 - 5.82 = 13.18 cm.
Now let's solve for the object distance of the first lens which will be denoted by L.
1/L = (1/f1) + (1/s'1)
Where f1 = 6 cm
1/L = (1/6) - (1/13.18)
1/L = 0.090794
L = 1/0.090794
L = 11.014 cm
3.1Chất điểm chuyển động thẳng với phương trình: x = – 1 + 3t2
– 2t
3
(hệ SI, với t ≥ 0). Chất điểm dừng lại để
đổi chiều chuyển động tại vị trí có tọa độ:
Answer:
eqcubuohwehuuc
Explanation:
the the the the the the the the the the the the the the the the dhueirrjhrhjrirjrheh3jeiiruj fnrhfjjjrjrj fjfiirrjejrjejej jrkrjrjrjrjrjdjdjfjrhruriruru rjridjhwjjsjd
The force in a string which is holding up an apple which type of force is it?
chứng minh V=kq/r từ mối liên hệ giữ E và V
Answer:V=Aq=KQr
Explanation:
Không biết V bạn kí hiệu ở đây là gì nhỉ? Có phải là điện thế?
Điện thế tại 1 điểm trong điện trường được định nghĩa là công làm vật dịch chuyển từ vị trí đó đến vô cùng. V = A/q
Chứng minh thì được, nhưng chỉ e bạn không có hiểu biết về nguyên hàm, tích phân nên không hiểu.
- Xét tại vị trí cách điện tích Q một đoạn x, khi đó điện tích q sẽ chịu 1 lực: dF=KQ.qx2
Điện tích q dịch chuyển 1 khoảng dx rất nhỏ. Khi đó công do lực điện trường gây ra là:
dA=dF.dx=KQ.qx2dx
Công để dịch chuyển điện tích q từ vị trí r đến vô cùng là:
A=∫∞rdA=∫∞rKQ.qx2dx=KQ.qr−KQ.q∞=KQ.qr
Theo đúng định nghĩa: V=Aq=KQr
4. Brandon throws a tennis ball vertically upward. The ball returns to the point of release after 4.0 s. What is the
speed of the ball as it is released?
Answer:
-39.2m/s
Explanation:
Using the equation of motion;
v = u + at
Since the ball is thrown upward, the acceleration due to gravity acting on it will be negative, hence a = -g
v = u - gt
Since g = 9.8m/s²
t = 4.0s
u = 0m/s
v = 0 + (-9.8)(4)
v = 0 + (-9.8)(4)
v = -39.2m/s
Hence the speed of the ball before release is -39.2m/s
A man pulls his dog (m=20kg) on a sled with a force of 100N at a 60° angle from the horizontal. What is the horizontal component of the force?
A) 100N
B) 196N
C) 50N
D) 86N
Answer:
Option C. 50 N
Explanation:
From the question given above, the following data were obtained:
Force (F) applied = 100 N
Angle (θ) = 60°
Horizontal component (Hₓ) =?
The horizontal component of the force can be obtained as follow:
Hₓ = F × Cos θ
Hₓ = 100 × Cos 60
Hₓ = 100 × 0.5
Hₓ = 50 N
Therefore, the horizontal component of the force acting on the dog is 50 N
Choose the CORRECT statements. A standing wave is resulted from the superposition of
two waves in such a way both waves:
I. have the same direction.
II. are opposite in direction.
III. have the same frequency.
IV. have different frequency.
V. have the same amplitude.
VI. have different amplitude
A. I, III and V
B. II. IV and VI
C. I, IV and V
D. II, III and V
E I and III
F. Ill and V
Answer:
The answer is D
A gas is enclosed in a cylinder fitted with a light frictionless piston and maintained at atmospheric pressure. When 7950 kcal of heat is added to the gas, the volume is observed to increase slowly from 12.8 m^3 to 19.4 m^3.
Required:
a. Calculate the work done by the gas. Express your answer with the appropriate units.
b. Calculate the change in internal energy of the gas, Express your answer with the appropriate units.
Answer:
Explanation:
From the question we are told that:
Energy [tex]Q=7950kcal=3.3*10^7[/tex]
Initial Volume [tex]V_1=12.8 m^2[/tex]
Final Volume [tex]V_2=19.4 m^2[/tex]
a)
Generally the equation for Work done is mathematically given by
[tex]W=P \triangle V[/tex]
Where
[tex]P= Pressure at 1atm[/tex]
Therefore
[tex]W=(1.01*10^5)(19.4-12.8)[/tex]
[tex]W=6.67*10^5J[/tex]
a)
Generally the equation for Change in internal energy of the gas is mathematically given by
[tex]\triangle U=Q-W[/tex]
[tex]\triangle U=3.3*10^7-6.67*10^5J[/tex]
[tex]\triangle U=3.2*10^7J[/tex]
Alex pushes on a 2.0 kg book, resulting in a net force of 6.0 N on the book.
What is the acceleration of the book?
A. 12 m/s2
B. 1.5 m/s2
C. 3.0 m/s2
D. 24 m/s2
HELPPPP
Answer:
3.0 m/s²Explanation:
The acceleration of an object given it's mass and the force acting on it can be found by using the formula
[tex]a = \frac{f}{m} \\ [/tex]
From the question we have
[tex]a = \frac{6}{2} \\ [/tex]
We have the final answer as
3.0 m/s²Hope this helps you
A single loop of wire with an area of 0.0900 m^2 is in a uniform magnetic field that has an initial value of 3.80 T, is perpendicular to the plane of the loop, and is decreasing at a constant rate of 0.160 T/s.
Reqiured:
a. What emf is induced in this loop?
b. If the loop has a resistance of 0.600Ω, find the current induced in the loop.
Answer:
a) [tex]E=0.0144[/tex]
b) [tex]I=0.024A[/tex]
Explanation:
From the question we are told that:
Area [tex]A=0.09m^2[/tex]
Magnetic Field [tex]B=3.80T[/tex]
Rate [tex]\frac{dB}{dt}=0.160T/s[/tex]
Generally the equation for EmF E is mathematically given by
[tex]E=-A\frac{dB}{dt}[/tex]
[tex]E=-(0.0900*0.160)[/tex]
[tex]E=0.0144[/tex]
b)
at Resistance R=0.60
Generally the equation for Current I is mathematically given by
[tex]E=IR[/tex]
[tex]I=\frac{0.0144}{0.600}[/tex]
[tex]I=0.024A[/tex]
Which of the following situations would violate the second law of
thermodynamics?
O A. A heat engine feeling cold after running for an hour
B. A heat engine using heat to do work
O C. A heat engine losing some energy as heat
D. A heat pump being 80% efficient
Answer: it’s A.
Explanation: A pex
calculate the work function that requires a 455 nm photon to eject an electron of a value 0.73 eV
Answer:
W = 2 eV
Explanation:
Given that,
The wavelength of a photon = 455 nm
The kinetic energy of a photon, K = 0.73 eV
We need to find the work function of the electron. It can be solved using Einstein's equation such that,
[tex]W=E-K[/tex]
E is the energy of the photon
So,
[tex]W=\dfrac{hc}{\lambda}-K\\\\W=\dfrac{6.63\times 10^{-34}\times 3\times 10^8}{455\times 10^{-9}\times 1.6\times 10^{-19}}-0.73\\\\W= 2.73\ eV-0.73\ eV\\\\W=2\ eV[/tex]
So, the work function of the metal is 2 eV.
Imagine that you are standing on a spherical asteroid deep in space far from other objects. You pick up a small rock and throw it straight up from the surface of the asteroid. The asteroid has a radius of 9 m and the rock you threw has a mass of 0.113 kg. You notice that if you throw the rock with a velocity less than 45.7 m/s it eventually comes crashing back into the asteroid.
Required:
Calculate the mass of the asteroid.
Answer:
M = 1.409 10¹⁴ kg
Explanation:
In this exercise we have that the prioress with a minimum speed can escape from the asteroid, therefore we can use the conservation of energy relation.
Starting point. When you drop the stone
Em₀ = K + U
Em₀ = ½ m v² - G m M / r
where M and r are the mass and radius of the asteroid
Final point. When the stone is too far from the asteroid
Em_f = U = - G m M / R_f
as there is no friction, the energy is conserved
Em₀ = Em_f
½ m v² - G m M / r = - G m M / R_f
½ v² = G M (1 / r - 1 /R_f)
indicate that for the speed of v = 45.7 m /s, the stone does not return to the asteroid so R_f = ∞
½ v² = G M (1 /r)
M = [tex]\frac{v^2 r}{2G}[/tex]
let's calculate
M = [tex]\frac{45.7^2 \ 9}{ 2 \ 6.67 \ 10^{-11}}[/tex]
M = 1.409 10¹⁴ kg
A moving object is in equilibrium. What bests describes the motion of the object if mo force changes
•It will change directions
•It will slow down
•It will maintain the state of motion
•It will speed up and ten slow down
Answer:
telekinesis moving things with your mind