A traveler pulls a suitcase

95.2 m with a 17.9 N force

directed at a 61.3° angle.


How much work does she do?


(Unit = J)

Option C is the correct answer .

What is lens ?

A lens is a transparent material, usually circular, with two polished surfaces, one or both of which are curved, either convex (curved) or concave (deep). Curves are almost always spherical. That is, the radius of curvature is constant. Lenses have the valuable property of producing images of objects in front of us. Singlet lenses are used in eyeglasses, contact lenses, pocket magnifiers, projection condensers, signal lights, viewfinders, and simple box cameras

To learn more about lens ,click the given link;

https://brainly.com/question/28039799

#SPJ4

Your meal will warm up in around 15 minutes because to the heat generated by this interaction. Heat is progressively released from it. However, this reaction happens considerably more quickly in a FRH, and as a result, heat is released much more quickly.

An oxidation-reduction reaction, an electron-transfer mechanism, is how ration heaters produce heat. Magnesium metal oxidises in water.

The ingredients used to make the FRHs include food-grade iron, magnesium, and sodium powder. Each FRH is packaged separately in a strong, leak-proof polybag that also acts as the MRE's heating container.

Learn more about FRH here:

https://brainly.com/question/16557710

#SPJ1

The initial momentum of the 25 kg object is 25 kg * 12 m/s = 300 kgm/s. After the collision, the momentum of the 25 kg object is 25 kg * 8 m/s = 200 kgm/s. According to the conservation of momentum, the momentum lost by the 25 kg object is equal to the momentum gained by the box. Therefore, the resulting momentum of the box is 300 kgm/s - 200 kgm/s = 100 kg*m/s.

The magnitude of the force per unit area on sheet i, in n/m2, is equal to the product of the pressure applied to the sheet and its surface area. Therefore, it is necessary to know the applied pressure and the surface area of the sheet to calculate the force per unit area.

1. Determine the applied pressure: The applied pressure is the force applied to the sheet divided by the surface area of the sheet.

2. Calculate the surface area of the sheet: The surface area of the sheet can be calculated by multiplying its length, width, and height.

3. Calculate the force per unit area: Multiply the applied pressure by the surface area of the sheet to calculate the force per unit area, in n/m2.

The magnitude of the force per unit area on sheet i, in n/m2, is equal to the product of the pressure applied to the sheet and its surface area. Therefore, it is necessary to know the applied pressure and the surface area of the sheet to calculate the force per unit area.

learn more about force here

https://brainly.com/question/13191643

#SPJ4

B. When displacement approaches the maximum amplitude.

When an object is moving in a periodic motion, such as a harmonic oscillation, the speed of the object is at its maximum when the displacement is closest to the maximum amplitude. At this point, the velocity vector is pointing in the direction of motion and the object is moving at its highest speed. The maximum amplitude is the highest point on the graph of displacement versus time, and it is the point where the object is moving at its fastest.

At the equilibrium point, the object is at rest and the velocity is zero. It's important to note that the maximum speed is not always constant, it will depend on the specific conditions of the oscillation, such as the amplitude and frequency of the motion.

Read more about mechanics :

https://brainly.com/question/23561157

#SPJ4

We get 12∘C amount of heat flow in w/m2 through the wall.

According to thermodynamics, heat is a type of energy that crosses a thermodynamic system's boundary due to a temperature differential across the barrier. [1] In a thermodynamic system, heat is not present. But the phrase is also frequently used to refer to the thermal energy that makes up a system's internal energy and is reflected in the system's temperature. Heat is a type of energy in both senses of the word. Heat is energy that is transferred into or out of a thermodynamic system via a mechanism involving either the corresponding macroscopic characteristics or microscopic atomic modes of motion. [3] The transmission of energy through thermodynamic work or mass transfer is not included in this descriptive description.

Learn more about heat here: https://brainly.com/question/21927103

#SPJ4

Aluminum has an atomic number of 13. This implies that the Al3+ ion contains the same number of electrons as (13-3 = 10) electrons.

A cation is a positively charged ion, to be more precise. An atom must lose an electron in order to become positively charged. The electronic configurations of an element with atomic number 13 are 2, 8, and 3. Thus, the atom of this element has three electrons in its valence shell. This atom has the valence M. The second element in the periodic table's thirteenth column is aluminum. It is categorized as a "poor metal" and a post-transition metal. 13 protons and 13 electrons make up an aluminum atom. The outer shell has three valence electrons.

Learn more about valence here-

https://brainly.com/question/12744547

#SPJ4

a. The angle between a diagonal of a cube and one of its edges is approximately 54.7356°.

b. No, the line through (4,6,3) and (2,0, -1) is not parallel to the line through (6,22,12) and (1,7,2).

C. question is incomplete.

a. To show the working, consider the diagonal of a cube with edge length "a":

Diagonal = √(a^2 + a^2 + a^2) = √(3a^2) = a√3

The length of the edge is "a".

To find the angle between the two, use the dot product formula:

cos(θ) = (a * a) / (a * √(3a^2)) = a / √(3a^2) = a / (a√3) = 1 / √3

Therefore, θ = cos^-1 (1 / √3) = 54.7356°

b. The line through (4,6,3) and (2,0, -1) is not parallel to the line through (6,22,12) and (1,7,2).

Parallel lines have the same direction and therefore the same slope. To check for parallelism, we can find the direction ratios of the lines.

The direction ratio of the line through (4,6,3) and (2,0, -1) is: (2-4,0-6,-1-3) = (-2,-6,-4)

The direction ratio of the line through (6,22,12) and (1,7,2) is: (1-6,7-22,2-12) = (-5,-15,-10)

Since the direction ratios are different, the two lines are not parallel.

To know more about co-ordinate geometry here:

https://brainly.com/question/21094061#

#SPJ4

Since you aren't painting on top of the pool, you are painting the pool's four sides, its bottom, and its five faces. 104 square meters is the surface area. The total cost of the paint was $624.

A three-dimensional shape's surface area is the sum of all of its faces. Finding the area for every face and adding them together gives us the land area of a shape.

The water-resistant paint required for the pool, which is 8 meters long, 6 meters wide, and 2 meters deep, costs $6 per sq meter.

A) Because you aren't painting on top of the pool, you are painting the pool's four sides, its bottom, and its five faces.

B) The pool requires 104 square meters of paint.

Just use surface area equation assuming the pools is a rectangular prism:

SA = wl + 2(hl) + 2(hw)

Since we're only including pool's bottom, don't add times 2 for wl.

l = 8 m

w = 6 m

h = 2 m

SA = (6)(8) + 2((2)(8)) + 2((2)(6))

SA = 104 sq m

C) The total cost of the paint was $624. $624 is equivalent to $104 × 6 square meters.

To learn more about surface area visit:

https://brainly.com/question/9478251

#SPJ1

In the given image gravitational potential energy is being transferred to kinetic energy. I n this case, option D is correct.

How does energy transform?

The process of changing energy's form, also known as energy transformation or energy conversion, is called this.

A quantity that allows one to move objects, perform work, or produce heat is referred to as energy in physics.

According to the principle of energy conservation, energy can change forms and be transferred to different locations or things, but it cannot be created or destroyed.

Energy can be used in many different ways, such as to power mechanical work so that machines can be operated, to support natural processes, or to benefit society in other ways, such as by providing for needs such as heating, cooling, lighting, or other societal requirements.

To Learn more About Energy transformation refer To:

brainly.com/question/24590200

#SPJ1

Answer:

If there are more molecules present, or there's a bigger surface area on which the reaction happens, there will be more successful collisions and the reaction will go faster. Also, if the temperature is higher, more molecules will have enough energy to react, and the reaction will be faster.

bicycle goes in a circle to go forward

The electric field strength is 58 cm from the sphere's center. express your answer in meganewtons per coulomb is [tex]{E_{19cm}} = 1.0517 \times {10^6}N/C\end{array}$$[/tex]

The formula for the electric field inside a solid sphere is:

[tex]$$\begin{array}{l}{E_{19cm}} = \frac{{kQr}}{{{R^3}}}\\{E_{19cm}} = \frac{{\left( {9 \times {{10}^9}N{m^2}/{C^2}} \right)\left( {15\mu C \times \frac{{{{10}^{ - 6}}C}}{{1\mu C}}} \right)\left( {19cm \times \frac{{{{10}^{ - 2}}m}}{{1cm}}} \right)}}{{{{\left( {29cm \times \frac{{{{10}^{ - 2}}m}}{{1cm}}} \right)}^3}}}\\{E_{19cm}} = 1.0517 \times {10^6}N/C\end{array}$$[/tex]

An electric-powered subject (occasionally E-discipline) is the bodily discipline that surrounds electrically charged particles and exerts a force on all differently charged particles in the field, either attracting or repelling them. It additionally refers to the bodily discipline of a device of charged debris. electric powered fields originate from electric charges and time-varying electric-powered currents. electric powered fields and magnetic fields are each manifestation of the electromagnetic subject, one of the 4 fundamental interactions (additionally referred to as forces) of nature.

Electric fields are vital in lots of areas of physics and are exploited in electrical generation. In atomic physics and chemistry, for example, the electrical field is the appealing force maintaining the atomic nucleus and electrons collectively in atoms. it's also the force answerable for chemical bonding among atoms that bring about molecules.

The electrical field is described as a vector discipline that pals to each factor in the area the electrostatic (Coulomb) force per unit of fee exerted on an infinitesimal advantageous test fee at relaxation at that factor. The derived SI unit for the electrical discipline is the volt in line with the meter (V/m), which is equal to the newton per coulomb (N/C).

To learn more about Electric fields visit here:

brainly.com/question/15800304

#SPJ4

The direction of the current through the wire loop, the direction of the magnetic moment of the loop, and the direction of the magnetic force exerted on the loop are all related to the direction of the changing magnetic field and the direction of the wire loop.

If the magnetic field is increasing and the wire loop is perpendicular to the field, the current will flow in a direction that creates a magnetic moment in the loop that opposes the increasing field. The force on the loop will be in a direction that tends to decrease the change in net flux.

If the magnetic field is decreasing and the wire loop is perpendicular to the field, the current will flow in a direction that creates a magnetic moment in the loop that aligns with the decreasing field. The force on the loop will be in a direction that tends to increase the change in net flux. If the magnetic field is constant and the wire loop is moving perpendicular to the field, the current will flow in a direction that creates a magnetic moment in the loop that is perpendicular to the field and the direction of the loop's motion. The force on the loop will be in a direction that tends to increase the change in net flux. It is worth noting that the direction of the current and magnetic force can be determined by using the "right-hand rule".

To know more about magnetic force please refer:

https://brainly.com/question/3160109

#SPJ4

Induction describes the fundamental action of creating currents with magnetic fields.

To distinguish it from charging by induction, which makes use of the electrostatic Coulomb force, this method is sometimes known as magnetic induction. Faraday reasoned that there must be an electromotive force moving the charges through the coil if a current is created in the coil. This interpretation was found to be wrong; instead, the energy added to the charges in the coil comes from an outside source that moves the magnet. The electromotive force is actually a potential since the energy added per unit charge is measured in volts. Regrettably, the term electromotive force stuck, along with the possibility for people to mistake it for a genuine force.

Learn more about current here-

https://brainly.com/question/2264542

#SPJ4

Answer:

The average kinetic energy of the atoms and/or molecules increases, roughly, in proportion to the absolute temperature: [eq] As the temperature increases, the diffusivity increases. Therefore, the water molecules of the hot water have more kinetic energy than the cold ones, and they oscillate more rapidly.

Answer:

Apply the force in the same direction, but at a distance further away from the pivot.

Explanation:

Consider a force of magnitude [tex]F[/tex] applied on to this lever.

Let [tex]r[/tex] denote the distance between the pivot and the point where this force is applied. Let [tex]\theta[/tex] denote the angle between the force and the lever.

The torque [tex]\tau[/tex] applied on this lever would be:

[tex]\tau = r\, F\, \sin(\theta)[/tex].

Assume that the magnitude and direction of the force stay the same, such that [tex]F[/tex] and [tex]\theta[/tex] would be constant. Note that torque [tex]\tau = r\, F\, \sin(\theta)[/tex] would be proportional to the distance [tex]r[/tex]. This distance can be increased by moving the force further away from the pivot.

Therefore, when the magnitude and direction of the external force on the lever are the same, applying the force at a point further away from the pivot would increase the torque.

A ball of mass 0.10 kg is dropped from a height of 18 m.1.5 Kgm/sec is strikes the ground. option (c) is correct.

What is mass ?

Mass, pronounced "măs," is a unit of measurement for the quantity of substance that comprises a physical body. In classical mechanics, an object's mass is important because it affects the amount of inertia it possesses and the force required to accelerate it according to Newton's equations of motion.

What is momentum ?

The mathematical relationship between mass and velocity is that of momentum. The amount of motion that is made up of the mass moved and the speed at which it is moving is known as momentum.

Momentum = sqrt (2mK) [K = Kinetic energy of block]

Applying energy conservation

K when it hits ground = mgh

So P = sqrt ( 2m2 gh) = m sqrt (2gh) = 0.10 * sqrt(2*9.8*12) = 1.534 Kgm/sec

So correct option is C) 1.5 Kgm/sec

Therefore, A ball of mass 0.10 kg is dropped from a height of 18 m.1.5 Kgm/sec is strikes the ground. option (c) is correct.

Learn more about mass from the given link.

https://brainly.in/question/46779501

#SPJ4

The graph obtain from the plot is consistent and the velocity is changing at different instance from the distance scale provided.

(a) In first frame  to third frame car velocity is decreasing and in fourth frame car moves with constant velocity up to sixth frame. From seventh frame to ninth frame velocity is increasing

(b) Measure the x-value of the car at each dot and place your data in a table, showing each position and the instant of time at which it occurred.

The table below shows a position and time of a car traveling down a street.

t v

0 1200

1 1000

2 850

3 750

4 700

5 650

6 600

7 500

8 300

9 0

(c) Yes, The slope of position vs time graph gives velocity. We can explain  from graph how the velocity is changing at different instance.

Learn more about the position and time here :

https://brainly.com/question/23414159

#SPJ4

The complete question is :

a) Describe what the car is doing in various regions.

(b) Note the position and time of the car at each dot and record in the table below.

Time t (s) Position x (m)

(c) Plot a graph of position vs. time below, labeling axes. Draw a curve of best fit through the points that passes through or close to as many of the data points as possible.

(d) Is your graph consistent with your description in part (a)? Explain.

A cylindrical column has height h and radius r, made of material of density ρ. The compressive stress at the bottom of this column is ρgh.

A cylinder's volume refers to the amount of interior space it has to hold a given quantity of material. And, this is given by [tex]V = \pi r^2h[/tex] where h is the cylinder's height and r is the cylinder's radius.

Given the cylinder's radius is r, height is h, and density is ρ. Then, the mass of the cylinder is calculated by multiplying the cylinder's volume and density. This is written as [tex]M = \pi r^2h\times \rho[/tex].

And the cylinder's weight is calculated by multiplying mass and gravity g. This is written as [tex]W = \rho \pi hr^2\times g[/tex].

We have to calculate the compressive stress at the bottom of the column. So the area of the bottom circle [tex]A = \pi r^2[/tex]. The compressive stress be then calculated as follows,

[tex]\begin{aligned}\text{Compressive stress}&=\frac{\text{ Weight}}{\text{Area}}\\&= \frac{(\rho \pi hr^2g)}{(\pi r^2)}\\&= \rho gh \end{aligned}[/tex]

The required answer is ρgh.

To know more about compressive stress:

https://brainly.com/question/2275395

#SPJ4

The distance that the mirror in pressure would be moved as the container is emptied of air is 0.0084 cm.

What is pressure?

Pressure is the amount of force applied to an area over a given surface. It is measured in units of force per area, such as pascals (Pa) or pounds per square inch (psi). Pressure is a fundamental physical property and is the result of the interaction of forces between particles of matter.

The index of refraction of air can be calculated using the equation:

n = c/v,

where n is the index of refraction, c is the speed of light in a vacuum, and v is the speed of light in the medium.

The speed of light in a vacuum is 3.00 x 10^8 m/s, and the speed of light in air is given by the equation:

v = c/n = (3.00 x 10^8 m/s)/(1.00028) = 2.99972 x 10^8 m/s.

Therefore, the index of refraction of air at 0 °C and 1.00 atm is 1.00028.

The difference between the index of refraction of air and the index of refraction of vacuum is 1.00028 – 1 = 0.00028.

Distance = (0.00028)*(30.0 cm) = 0.0084 cm

Therefore, the distance the mirror must be moved as the container is emptied of air is 0.0084 cm.

To learn more about pressure

brainly.com/question/28012687

#SPJ4

In the equation, Fm represents magnetic force.

option 2 is the correct answer.

Magnetic force, is the force of attraction or repulsion that arises between electrically charged particles because of their motion.

The magnetic force between two parallel current carrying wires is given as;

F / L = ( μI₁I₂ ) / ( 2πr )

where;

The equation that describes Fm stated in the question is interpreted as;

Fm = K M₁M₂ ) / ( d )

where

Learn more about magnetic force here: https://brainly.com/question/13277365

#SPJ1

The equivalent capacitance is 5.4μF, the charge on 3.0μF capacitor is 57μC, the charge on 4.0μF capacitor is 76μC, the charge on 6.0μF capacitor is 114μC.

Given from the diagram below the emf E = 19V

The capacitance of first capacitor (C1) = 3.0μF

The capacitance of second capacitor (C2) = 4.0μF

The capacitance of third capacitor (C3) = 6.0μF

We can see that the capacitors C2 and C3 are connected in series and C1 is connected in parallel to C2 and C3.

So, the capacitance in series is 1/C' = 1/4 + 1/6

C' = 2.4μF and Ceq = C' + C1 = 2.4 + 3 = 5.4μF

(a) The equivalent capacitance = 5.4μF

We know that E = Q/C where Q is the charge and E is the voltage.

(b) the charge on 3.0μF capacitor (Q1) = 19 x 3 = 57μC

(c) the charge on 4.0 μF capacitor (Q2) = 19 x 4 = 76μC

(d) the charge on 6.0 μF capacitor (Q3) = 19 x 6 = 114μC

To learn more about capacitance click here https://brainly.com/question/12644355

#SPJ4

Answer:

13,750 kg

Explanation:

p = mv

m = p/v = (152625 kg·m/s) / (11.1 m/s) = 13,750 kg

True. In a head-on collision between two protons, the total momentum of the system must remain the same.

Total momentum is the sum of the momentum of all the objects in a system. Momentum is a vector quantity, meaning it has both magnitude and direction. It is calculated by multiplying the mass of an object by its velocity. In a closed system, the total momentum of the system remains constant, meaning that the momentum of one object increases as the momentum of another decreases. This is known as the law of conservation of momentum. This law states that the total momentum of a system before and after a collision is the same.

Since most of the resultant particles travel to the right, there must be at least one particle that moves to the left in order to conserve the momentum of the system.

To learn more about total momentum
https://brainly.com/question/25121535
#SPJ1

Answer: The value of each mass is approximately 9.8 x 10^-5 kg. ✅

Explanation:

PLEASEEEE GIVE BRANLIEST

To solve for the mass of each object, we can use the formula F = G(m1m2)/r^2, where F is the force between the two objects, G is the gravitational constant (6.67 x 10^-11 N*(m^2)/(kg^2)), m1 and m2 are the masses of the two objects, and r is the distance between them.

Given that F = 6.253 x 10-10 N and r = 0.8 meters, we can plug these values into the formula and solve for m1 and m2 (which are equal in this case)

6.253 x 10-10 N = (6.67 x 10^-11 N*(m^2)/(kg^2)) * (m1 * m2) / (0.8 m)^2

m1 = m2 = sqrt((6.253 x 10-10 N) * (0.8 m)^2 / (6.67 x 10^-11 N*(m^2)/(kg^2)))

m1 = m2 = sqrt((6.253 x 10-10 N) * (0.8^2 m^2) / (6.67 x 10^-11 N*(m^2)/(kg^2)))

m1 = m2 = sqrt((6.253 x 10-10 N) * (0.64 m^2) / (6.67 x 10^-11 N*(m^2)/(kg^2)))

m1 = m2 = sqrt((6.253 x 10-10 N) * (0.64 ) / (6.67 x 10^-11 N))

m1 = m2 = sqrt((6.253 x 10-10 N * (0.64 )) / (6.67 x 10^-11 N))

Answer:

Explanation:

According to gravitation law of universe,

Force=(G*M1*M2)/R^2

R=8/2=4m ,F=6.253*10^-10

M^2/R^2=6.253*10^-10/6.6743*10^-11

M=12.243KG

TO KNOW MORE ABOUT GRAVITATIONAL LAW OF UNIVERSE,

https://brainly.in/textbook-solutions/q-state-kepler-s-laws-1?source=qa-qp-match#q-state-newton-s-universal-law-gravitation-1

According to the question, the Gravity Coaster travels 34 meters per second.

What is gravity?
Gravity is a natural phenomenon by which all things with mass or energy are brought toward one another. It is most commonly experienced as the force that gives weight to physical objects and causes them to fall toward the ground when dropped. Gravity is caused by the presence of mass or energy and it is the result of space-time curvature. It is the weakest of the four fundamental forces, yet it is the most dominant force in the universe, because it has infinite range and is always attractive. Gravity affects all objects in the universe, including light, and is responsible for the formation of galaxies, stars, planets and even life.

To learn more about gravity
https://brainly.com/question/940770

#SPJ1

1. Ranking Of The Same Monatomic Ideal Gas Sample on the basis of the temperature of the gas sample in each state is F=E>D>C=B>A.

Monatomic, which is a combination of the terms "mono" and "atomic" and refers to a single atom, is a term used in physics and chemistry. A monatomic gas is a gas in which atoms are not bonded to one another, and it is typically used to describe gases.

All of the noble gases (helium, neon, argon, krypton, xenon, and radon) are examples at conventional temperatures and pressures, yet at sufficiently high temperatures, all chemical elements become monatomic in the gas phase (or very low pressure). Because a monatomic gas has no rotational or vibrational energy, its thermodynamic behavior is significantly simpler than that of polyatomic gases.

We take into account an ideal monatomic gas with particles of mass m that don't interact and whose center of mass stays at rets.

To learn more about Ideal gas from given link

https://brainly.com/question/27870704

#SPJ4

Complete Question -