a triangle has two angles that measure 18.6 degrees and 113.4 degrees respectively. what is the measure of the third angle?


ill give brainiest

Answer: 1650

Step-by-step explanation:

(7.5*11*2.5) / .5^3

1650

We can see that we are looking for the probability of getting a 5 or a factor of 48 from a 6-sided dice. Thus, the probability is 1.

Probability is a way to gauge or quantify how likely something is to happen. It reflects the likelihood or potential for an event to occur, with values ranging from 0 (impossible) to 1. (certain).

We can see here that the probability of getting a 5 or a factor of 48 is:

P(5) = 1/6

Factors of 48 are:  1, 2, 3, 4, 6, 8, 12, 16, 24 and 48.

The factors of 48 found in the dice are: 1, 2, 3, 4, 6

Thus, P(factor of 48) = 5/6

Thus, P(5 or factor of 48) = P(5) +  P(factor of 48) = 1/6 + 5/6 = 6/6 = 1

Learn more about probability on https://brainly.com/question/13604758

#SPJ1

Given the inequality problem,The sum of a number and 15 is no greater than 32. We need to solve the inequality problem and select all possible values for the number.

So, we can write it mathematically as:x + 15 ≤ 32 Subtract 15 from both sides of the equation,x ≤ 32 - 15x ≤ 17 Therefore, all possible values for the number is x ≤ 17.The solution of the given inequality problem is x ≤ 17.Answer: The possible values for the number is x ≤ 17.

To know more about inequality,visit:

https://brainly.com/question/20383699

#SPJ11

The equation to calculate the distance d for any star using the angle O and the astronomical unit (AU) is: d = AU / tan(O), where tan(O) represents the tangent of the angle O in degrees.

In order to write an equation to calculate the distance d for any star using the given information, we can make use of the concept of stellar parallax.

Stellar parallax is a technique used by astronomers to measure the distance to stars by observing their apparent shift in position as seen from different points in Earth's orbit around the Sun.

The angle O in the diagram represents this shift in position.

Now, let's consider the basic principle of stellar parallax.

The distance d from the star to the Sun is inversely proportional to the angle O.

This means that as the angle O increases, the distance d decreases, and vice versa.

We can express this relationship mathematically using the equation:

d = k/O

In this equation, k represents a constant of proportionality.

The value of k depends on the units of measurement used for d and O. Since astronomical units (AU) are used to measure distance in this context, we can rewrite the equation as:

d = k/AU

By rearranging the equation, we can solve for k:

k = d [tex]\times[/tex] AU

Therefore, the equation to calculate the distance d for any star using the given angle O and astronomical units (AU) is:

d = k/O = (d [tex]\times[/tex] AU)/O

This equation allows astronomers to determine the distance to a star based on its observed stellar parallax angle O and the average distance from Earth to the Sun, represented by one astronomical unit (AU).

For similar question on distance.

https://brainly.com/question/29409777  

#SPJ8

The length of the segment indicated in the figure is 4.21 in.

Given are two right triangles with one having base and perpendicular on 6 in and 7 in respectively and the other one is having base and perpendicular on 3 in and 4 in respectively joined their hypotenuse,

we need to find the length of the segment indicated in the figure,

So to find the same we will find the length of the hypotenuse of both and subtract the smaller one from the larger one,

So, the hypotenuse of the rt. triangle with base and perpendicular on 6 in and 7 in = √6²+7² = √36+49 = 9.21

the hypotenuse of the rt. triangle with base and perpendicular on 3 in and 4 in = √3²+4² = 5

Therefore, the length of the segment indicated in the figure = 9.21-5 = 4.21 in

Hence the length of the segment indicated in the figure is 4.21 in.

Learn more about right triangles click;

https://brainly.com/question/6322314

#SPJ1

The general solution of the system of differential equations is given by the two equations:

y = ±e^(4x+C1)

x = ±e^(-y/2+C2)

where the ± signs indicate the two possible solutions depending on the initial conditions.

To solve the system of differential equation, we first use the given equations to find the general solution for each variable separately.

This is done by isolating the variables on one side of the equation and integrating both sides with respect to the other variable.

Once we have the general solutions for each variable, we can combine them to form the general solution for the system of differential equations.

This is done by substituting the general solution for one variable into the other equation and solving for the other variable.

The resulting general solution contains two possible solutions, each with its own constant of integration. The choice of which solution to use depends on the initial conditions of the problem.

To solve the system of differential equations:

dy/dx = 4y

dx/dy = -x/2

The first equation can be written as:

dy/y = 4dx

Integrating both sides:

ln|y| = 4x + C1

where C1 is the constant of integration.

Taking the exponential of both sides:

|y| = e^(4x+C1)

Simplifying by removing the absolute value:

y = ±e^(4x+C1)

where ± represents the two possible solutions depending on the initial conditions.

The second equation can be written as:

dx/x = -dy/2

Integrating both sides:

ln|x| = -y/2 + C2

where C2 is the constant of integration.

Taking the exponential of both sides:

|x| = e^(-y/2+C2)

Simplifying by removing the absolute value:

x = ±e^(-y/2+C2)

where ± represents the two possible solutions depending on the initial conditions.

Learn more about differential equation

brainly.com/question/14620493

#SPJ11

To find the area and perimeter of each lane in the straightaways, we can use the formulas you provided and break down the composite figure into its individual components (rectangles and circles).

Given that each straightaway is 85.0 meters long, we can consider each lane as a rectangle with a length of 85.0 meters. The width of each lane may vary depending on the specific design, but for simplicity, let's assume the width of each lane is the same.

1. Area of each lane in the straightaway:

The area of a rectangle is given by the formula A = length * width (A = lw).

Since the length of each lane is 85.0 meters, and the width is the same for all lanes, let's denote the width as w. Thus, the formula for the area of each lane in the straightaway is A = 85.0 * w.

2. Perimeter of each lane in the straightaway:

The perimeter of a rectangle is given by the formula P = 2(length + width) (P = 2(l + w)).

Since the length of each lane is 85.0 meters, and the width is the same for all lanes, the formula for the perimeter of each lane in the straightaway is P = 2(85.0 + w).

Now, if there are any curved sections in the track, you mentioned they are circles. To find the area and perimeter of the circles, we can use the formulas you provided:

3. Area of each circle:

The area of a circle is given by the formula A = πr^2, where r is the radius of the circle. If you have the radius for the circles in the track, you can use this formula to find the area of each circle.

4. Circumference of each circle:

The circumference of a circle is given by the formula C = 2πr, where r is the radius of the circle. If you have the radius for the circles in the track, you can use this formula to find the circumference of each circle.

By applying the appropriate formulas for the rectangles and circles in the composite figure, you can find the area and perimeter of each lane in the straightaways and the curved sections of the track.

To know more about area visit:

brainly.com/question/1631786

#SPJ11

The answer is , the volume of the rectangular piece of iron is 6.96 × 10⁻⁷ m³.

The formula for the volume of a rectangular prism is given by V = l × b × h,

where "l" is the length of the rectangular piece of iron, "b" is the breadth of the rectangular piece of iron, and "h" is the height of the rectangular piece of iron.

Here are the given measurements for the rectangular piece of iron:

Length (l) = 7.08 × 10⁻³ m,

Breadth (b) = 2.18 × 10⁻² m,

Height (h) = 4.51 × 10⁻³ m,

Now, let us substitute the given values in the formula for the volume of a rectangular prism.

V = l × b × h

V = 7.08 × 10⁻³ m × 2.18 × 10⁻² m × 4.51 × 10⁻³ m

V= 6.96 × 10⁻⁷ m³

Therefore, the volume of the rectangular piece of iron is 6.96 × 10⁻⁷ m³.

Therefore, the correct answer is 6.96 × 10⁻⁷ m³.

To know more about Formula visit:

https://brainly.com/question/30098455

#SPJ11

Therefore, the limit as a definite integral is ∫[-2,3] f(x) dx, that is, 62.25.

To express the given limit as a definite integral, we need to use the definition of a Riemann sum and convert it into an integral.

The given limit can be expressed as

lim(n → ∞) ∑(k=1 to n) △x · (x_k)³

where △x = (b-a)/n is the width of each subinterval, with a = -2 and b = 3 being the endpoints of the interval [-2, 3]. We can rewrite (x_k)³ as f(x_k) and interpret the limit as the definite integral of f(x) over the interval [-2, 3]

lim(n → ∞) ∑(k=1 to n) △x · (x_k)³ = ∫[-2,3] f(x) dx

where f(x) = x³. Using the Fundamental Theorem of Calculus, we can evaluate the integral as

∫[-2,3] f(x) dx = F(3) - F(-2)

where F(x) is the antiderivative of f(x) = x³, which is F(x) = (1/4) x⁴ + C, where C is a constant of integration.

Thus, the definite integral is

∫[-2,3] f(x) dx = F(3) - F(-2) = (1/4) (3⁴ - (-2)⁴) = 62.25

To know more about definite integral here

https://brainly.com/question/30772555

#SPJ4

The exact volume of the solid S is  [tex]V = (\frac{32}{3} )\sqrt{6}[/tex]cubic units.

Consider a vertical slice of the solid taken at a value of y between 0 and 4. The slice is an equilateral triangle with side length equal to the distance between the two points on the parabola with that y-coordinate.

Let's find the equation of the parabola in terms of y:

x^2 = 8y

x = ±[tex]2\sqrt{2} ^{\frac{1}{2} }[/tex]

Thus, the distance between the two points on the parabola with y-coordinate y is:[tex]d = 2\sqrt{2} ^{\frac{1}{2} }[/tex]

The area of the equilateral triangle is given by: [tex]A= \frac{\sqrt{3} }{4} d^{2}[/tex]

Substituting for d, we get:

[tex]A=\frac{\sqrt{3} }{4} (2\sqrt{2} ^{\frac{1}{2} } )^{2}[/tex]

A = 2√6y

Therefore, the volume of the slice at y is: dV = A dy = 2√6y dy

Integrating with respect to y from 0 to 4, we get:

[tex]V = [\frac{4}{3} (2\sqrt{x6}) y^{\frac{3}{2} }][/tex]

[tex]V = \int\limits \, dx (0 to 4) 2\sqrt{6} y dy[/tex]

[tex]V = [(\frac{4}{3} ) (0 to 4)[/tex]

[tex]V = (\frac{32}{3} )\sqrt{6}[/tex]

Hence, the exact volume of the solid S is  [tex]V = (\frac{32}{3} )\sqrt{6}[/tex]cubic units.

To know more about "Volume" refer here:

https://brainly.com/question/13807002?referrer=searchResults

#SPJ11

To find a 95% confidence interval for the population mean μ, we can use the formula:

Confidence Interval = sample mean ± (critical value) * (sample standard deviation / √n)

Given that the sample mean is 10, the sample standard deviation is 2, and the sample size is 16, we can calculate the confidence interval.

First, we need to determine the critical value associated with a 95% confidence level. Since the distribution is mound-shaped and symmetric, we can assume it follows a normal distribution. Looking up the critical value in the standard normal distribution table for a 95% confidence level, we find it to be approximately 1.96.

Substituting the values into the formula, we have:

Confidence Interval = 10 ± (1.96) * (2 / √16)

Simplifying, we get:

Confidence Interval = 10 ± (1.96) * (0.5)

The confidence interval is therefore:

Confidence Interval = 10 ± 0.98

This gives us the interval (9.02, 10.98) as the 95% confidence interval for the population mean μ.

Interpretation: This means that we are 95% confident that the true population mean falls within the interval (9.02, 10.98). It suggests that if we were to repeat the sampling process and construct 95% confidence intervals, approximately 95% of those intervals would contain the true population mean. Additionally, the interval (9.02, 10.98) provides an estimate of the range within which the population mean is likely to fall based on the information from the sample.

Learn more about deviation here: brainly.com/question/29734279

#SPJ11

The left-hand limit is 5, and the right-hand limit is 1. The limit of f(x) as x approaches 1 does not exist.

To find the limits, let's evaluate the left-hand limit and the right-hand limit separately.

Since x approaches 1 from the left side (values less than 1), we can use the expression f(x) = x² + 4.

Plugging in x = 1 into the expression gives us:

lim x → 1- f(x) = lim x → 1- (1² + 4)

                  = lim x → 1- (1 + 4)

                  = lim x → 1- (5)

                  = 5

lim x → 1+ f(x) = lim x → 1+ ((x - 2)²)

Since x approaches 1 from the right side (values greater than or equal to 1), we can use the expression f(x) = (x - 2)².

Plugging in x = 1 into the expression gives us:

lim x → 1+ f(x) = lim x → 1+ ((1 - 2)²)

                  = lim x → 1+ ((-1)²)

                  = lim x → 1+ (1)

                  = 1

To determine if the limit lim x → 1 f(x) exists, we need to compare the left-hand and right-hand limits. If they are equal, then the limit exists. Otherwise, the limit does not exist.

In this case, lim x → 1- f(x) = 5 and lim x → 1+ f(x) = 1. Since these limits are not equal, the limit lim x → 1 f(x) does not exist.

Learn more about limits

brainly.com/question/19755645

#SPJ11

The function y = (x²)^(1/2) + 3 belongs to the family of square root functions.

What is a square root function?

A square root function is a function that has a variable that is the square root of the variable used in the function. A square root function has the general form:

                                           f(x) = a√(x - h) + k,

where a, h, and k are constants and a is not equal to 0.

A square root function is an inverse function to a quadratic function.

A square root function is a function that, when graphed, produces a curve with a domain (all possible values of x) of x ≥ 0 and a range (all possible values of y) of y ≥ 0, which means it is positive or zero for all values of x.

To know more about square root functions, visit:

https://brainly.com/question/30459352

#SPJ11

The total distance Fiona covers in 2 laps is 439.6 meters.

To calculate the total distance Fiona covers in two laps, we first need to find the distance of one lap and then multiply it by 2.

The formula for the circumference of a circle is C = 2πr, where C is the circumference, π is a constant equal to approximately 3.14, and r is the radius of the circle.

Given that the course is 70 meters, we know that the diameter of the circle is also 70 meters.

We can find the radius by dividing the diameter by 2:radius (r) = diameter (d) / 2r = 70 m / 2r = 35 m

Now we can use the formula for the circumference of a circle to find the distance of one lap:

C = 2πrC = 2 × 3.14 × 35C ≈ 219.8 m

Therefore, the total distance Fiona covers in 2 laps is 2 × 219.8 = 439.6 meters or approximately 440 meters.

To learn more about circumference here:

https://brainly.com/question/27447563

#SPJ11

The value of the functions are;

f(g(-1)) = 29

g(f(4)) = 34

A function is described as an expression that shows the relationship between two variables

From the information given, we have the functions as;

f(x) = 2x²-3

g(x) = x+5

To determine the function f(g(-1)), first, we have;

g(-1) = (-1) + 5

add the values

g(-1) = 4

Substitute the value as x in f(x)

f(g(-1)) = 2(4)² - 3

Find the square and multiply

f(g(-1)) = 29

For the function , g(f(4))

f(4) = 2(4)² - 3 = 29

Substitute the value as x, we get;

g(f(4)) = 29 + 5

g(f(4)) = 34

Learn more about functions at: https://brainly.com/question/11624077

#SPJ1

(a) is false because row equivalence requires more than just the same number of rows. (c) is false because row equivalence does not guarantee the same number of solutions

(a) The statement "Two matrices are row equivalent if they have the same number of rows" is false. Row equivalence between matrices is determined by the existence of a sequence of row operations that transforms one matrix into the other. The number of rows alone does not determine row equivalence. Two matrices can have the same number of rows but still not be row equivalent if their row operations lead to different row configurations or element values.

(c) The statement "Two matrices that are row equivalent have the same number of solutions, which means that they have the same number of rows" is false. The row equivalence of matrices does not directly relate to the number of solutions they possess. The number of solutions is determined by the rank and consistency of the augmented matrix formed by combining the coefficient matrix and the constant vector. While row equivalence can affect the solutions, it is not the sole determinant.

Row equivalence is based on the existence of row operations that transform one matrix into another, and it does not depend solely on the number of rows or solutions.

Learn more about row operations here: https://brainly.com/question/23012744

#SPJ11

The p-value is less than the significance level (typically 0.05), we reject the null hypothesis and conclude that the majority of teens in this age range do not respond better to the new drug therapy for autism.

The correct answer is not provided in the question. The chi-square test statistic cannot be used for testing hypotheses about a single proportion. Instead, we use a z-test for proportions. To find the test statistic, we first calculate the sample proportion:

p-hat = 411/900 = 0.4578

Then, we calculate the standard error:

SE = [tex]\sqrt{[p-hat(1-p-hat)/n] } = \sqrt{[(0.4578)(1-0.4578)/900]}[/tex] = 0.0241

Next, we calculate the z-score:

z = (p-hat - p) / SE = (0.4578 - 0.50) / 0.0241 = -1.77

Finally, we find the p-value using a normal distribution table or calculator. The p-value is the probability of getting a z-score as extreme or more extreme than -1.77, assuming the null hypothesis is true. The p-value is approximately 0.0392.

Since the p-value is less than the significance level (typically 0.05), we reject the null hypothesis and conclude that the majority of teens in this age range do not respond better to the new drug therapy for autism.

Learn more about null hypothesis here:

https://brainly.com/question/28920252

#SPJ11

The manager of the Melodic Kortholt Outlet performed an audit and found that the disappearance of their inventory follows the pattern of 40% shoplifting, 47.5% employee theft, and 12.5% faulty paperwork.

The manager wants to know if their store's experience follows the same pattern as other retailers, as claimed by the Oxnard Retailers Anti-Theft Alliance (ORATA) study, which stated that the causes of disappearance of inventory in retail stores were 30% shoplifting, 50% employee theft, and 20% faulty paperwork.To determine if the Melodic Kortholt Outlet's pattern differs from the published study, we can perform a chi-square goodness-of-fit test. The null hypothesis (H0) is that the Melodic Kortholt Outlet's pattern follows the same distribution as the ORATA study, and the alternative hypothesis (Ha) is that they are different.Using α = .05 and two degrees of freedom (since there are three categories), the critical value is 5.991. The calculated chi-square value is 2.267, which is less than the critical value. Therefore, we fail to reject the null hypothesis and conclude that there is not enough evidence to suggest that the Melodic Kortholt Outlet's pattern differs significantly from the ORATA study's claimed pattern. In other words, the Melodic Kortholt Outlet's experience is consistent with the pattern reported by ORATA.

Learn more about paperwork here

https://brainly.com/question/19169731

#SPJ11

The most appropriate missing data treatment technique to give the best estimates of model parameters is multiple imputations.

While listwise deletion and mean substitution are simpler methods, they can result in biased estimates if the missing data are not randomly distributed.

On the other hand, multiple imputations involve creating multiple plausible imputed datasets based on the observed data and statistical models and then analyzing each imputed dataset separately before combining the results to obtain the final estimates.

This method takes into account the uncertainty associated with the missing data and produces more accurate estimates compared to other techniques.

Therefore, although multiple imputations require more effort and computation, it is considered the preferred approach for handling missing data in statistical analysis.

Know more about multiple imputation here:

https://brainly.com/question/28348410

#SPJ11

In summary, statements A and C are true.

To determine which statement is true, we need to compare the confidence interval with the null hypothesis and the alternative hypothesis.

The 95% confidence interval is constructed as 1.1 ± 0.8, which means the interval ranges from (1.1 - 0.8) to (1.1 + 0.8). This gives us the interval (0.3, 1.9).

Now let's compare the confidence interval with the null and alternative hypotheses:

A. H0: μ = 1.1, Ha: μ ≠ 1.1

The confidence interval (0.3, 1.9) does not contain the value 1.1, which is the null hypothesis mean. Therefore, we would reject H0: μ = 1.1 against Ha: μ ≠ 1.1 at α = 0.05. So statement A is true.

B. H0: μ = 2.4, Ha: μ ≠ 1.4

The confidence interval (0.3, 1.9) does not include the value 2.4, which is the null hypothesis mean. However, the alternative hypothesis is μ ≠ 1.4, not μ ≠ 2.4. Therefore, statement B is not true.

C. H0: μ = 2.4, Ha: μ ≠ 2.4

The confidence interval (0.3, 1.9) does not contain the value 2.4, which is the null hypothesis mean. So, we would reject H0: μ = 2.4 against Ha: μ ≠ 2.4 at α = 0.05. Therefore, statement C is true.

D. H0: μ = 1.2, Ha: μ ≠ 1.2

The confidence interval (0.3, 1.9) does not include the value 1.2, which is the null hypothesis mean. However, the alternative hypothesis is μ ≠ 1.2, not μ ≠ 1.1. Therefore, statement D is not true.

To learn more about interval visit:

brainly.com/question/11051767

#SPJ11

The buffer capacity is at its maximum when the pH of the solution is equal to the pKa of the acid in the buffer system.

The buffer capacity is at a maximum when the pH is equal to the pKa of the acid-base system and can be calculated using the formula: log [A-]/[HA], where [A-] represents the concentration of the conjugate base and [HA] represents the concentration of the acid.

When the pH is equal to the pKa, the concentrations of the acid and its conjugate base are equal. This balanced ratio maximizes the buffer capacity because any addition of acid or base to the system is efficiently neutralized by the equilibrium between the acid and its conjugate base.

At this pH, a small amount of acid or base will cause only a minimal change in the pH of the solution, making the buffer highly resistant to pH changes. Consequently, the buffer capacity is at its maximum, indicating the buffer's effectiveness in maintaining a stable pH.

Learn more about buffer capacity

brainly.com/question/19340454

#SPJ11

Answer:

+2k

Step-by-step explanation:

See the attached image.  The addition of k will shift the function up by 2k units.

The area of the region bounded above by y = 3x and below by y = 9x^2 is 270 square units.

To use Green's Theorem to calculate the area of the region bounded above by y = 3x and below by y = 9x^2, we need to first find a vector field whose divergence is 1 over the region.

Let F = (-y/2, x/2). Then, ∂F/∂x = 1/2 and ∂F/∂y = -1/2, so div F = ∂(∂F/∂x)/∂x + ∂(∂F/∂y)/∂y = 1/2 - 1/2 = 0.

By Green's Theorem, we have:

∬R dA = ∮C F · dr

where R is the region bounded by y = 3x, y = 9x^2, and the lines x = 0 and x = 6, and C is the positively oriented boundary of R.

We can parameterize C as r(t) = (t, 3t) for 0 ≤ t ≤ 6 and r(t) = (t, 9t^2) for 6 ≤ t ≤ 0. Then,

∮C F · dr = ∫0^6 F(r(t)) · r'(t) dt + ∫6^0 F(r(t)) · r'(t) dt

= ∫0^6 (-3t/2, t/2) · (1, 3) dt + ∫6^0 (-9t^2/2, t/2) · (1, 18t) dt

= ∫0^6 (-9t/2 + 3t/2) dt + ∫6^0 (-9t^2/2 + 9t^2) dt

= ∫0^6 -3t dt + ∫6^0 9t^2/2 dt

= [-3t^2/2]0^6 + [3t^3/2]6^0

= -54 + 324

= 270.

Therefore, the area of the region bounded above by y = 3x and below by y = 9x^2 is 270 square units.

To know more about Green's Theorem refer here :

https://brainly.com/question/28328085#

#SPJ11

To find the vector u3 using the Gram-Schmidt process, we start with the given vectors u1 = (1, 2, 1) and u2 = (2, 1, -1). The Gram-Schmidt process involves orthogonalizing each vector with respect to the previous vectors in the set.

Step 1: Normalize u1 to obtain the first orthonormal vector v1.

v1 = u1 / ||u1|| = (1, 2, 1) / √(1^2 + 2^2 + 1^2) = (1/√6, 2/√6, 1/√6)

Step 2: Find the projection of u2 onto v1 and subtract it from u2 to obtain a new vector u2' that is orthogonal to v1.

projv1(u2) = (u2 · v1) * v1 = (2/√6, 4/√6, 2/√6)

u2' = u2 - projv1(u2) = (2, 1, -1) - (2/√6, 4/√6, 2/√6) = (2 - 2/√6, 1 - 4/√6, -1 - 2/√6)

Step 3: Normalize u2' to obtain the second orthonormal vector v2.

v2 = u2' / ||u2'|| = ((2 - 2/√6)/√(1 + (2 - 2/√6)^2 + (1 - 4/√6)^2 + (-1 - 2/√6)^2), (1 - 4/√6)/√(1 + (2 - 2/√6)^2 + (1 - 4/√6)^2 + (-1 - 2/√6)^2), (-1 - 2/√6)/√(1 + (2 - 2/√6)^2 + (1 - 4/√6)^2 + (-1 - 2/√6)^2))

Finally, u3 is the remaining vector after orthogonalizing u3' with respect to v1 and v2. Since u3' is orthogonal to v1 and v2, u3 will also be orthogonal to both v1 and v2. Therefore, u3 can be expressed as u3 = (a, b, c), where a, b, and c are constants to be determined.

Learn more about orthogonal  : brainly.com/question/32196772

#SPJ11

For the expression f(x) = (-2x + 3 if x < -2) 5x - 6 if x ≥ -2) for x = 2, f(x) is equal to 4 (d).

To evaluate the expression, substitute the given value for the variable. In this case, given that x = 2. Then substitute this value into the expression and simplify.

f(x) = (-2x + 3 if x < -2)

   (5x - 6 if x ≥ -2)

Since x = 2≥ −2, use the second definition of f: 5x − 6. Therefore, f(2) = 5(2) − 6 = 10 − 6 = 4

​

Find out more on evaluation here: https://brainly.com/question/25907410

#SPJ1

the average rate of change of the function g(x) over the interval [-5, 0] is 1.

To find the average rate of change of the function g(x) over the interval [-5, 0], we need to calculate the change in the function value and divide it by the change in the input value:

average rate of change = (change in g(x))/(change in x)

We can calculate the change in the function value as follows:

g(0) - g(-5) = [-0^2 - 6(0) + 11] - [(-(-5))^2 - 6(-(-5)) + 11]

= [11] - [6 - 11 + 11]

= [11] - [6]

= 5

We can calculate the change in the input value as follows:

0 - (-5) = 5

Therefore, the average rate of change of the function g(x) over the interval [-5, 0] is:

average rate of change = (change in g(x))/(change in x) = 5/5 = 1

To learn more about average rate visit:

brainly.com/question/14601358

#SPJ11

The population density varies across the regions, with Region A having the highest density and Region B having the lowest density.

The table is given as follows:

                     Population       Area (km²)

Region A:        20,178              521

Region B:        1,200              451

Region C:       13,475              395

Region D:        6,980              426

To calculate population density, we divide the population by the area:

Region A: Population density = 20,178 / 521 ≈ 38.72 people/km²

Region B: Population density = 1,200 / 451 ≈ 2.66 people/km²

Region C: Population density = 13,475 / 395 ≈ 34.11 people/km²

Region D: Population density = 6,980 / 426 ≈ 16.38 people/km²

Based on these calculations, we can conclude the following about the population density:

Region A has the highest population density with approximately 38.72 people/km².

Region C has the second-highest population density with approximately 34.11 people/km².

Region D has a lower population density compared to Region A and Region C, with approximately 16.38 people/km².

Region B has the lowest population density with approximately 2.66 people/km².

Learn more about the population density here:

https://brainly.com/question/16894337

#SPJ1

Answer:

Step-by-step explanation: If you do L to North is 015° and from L to M is 096°. the straight line distance between L and Mis 122km,283km.notation.(a) L and K,(b) L and M ,(c)K and M​

Our approximation of the definite integral to six decimal places is:

= 0.064687.

To approximate the definite integral, we can use the power series expansion of the integrand, [tex]x^5 / (1+x^6).[/tex]

We have:

[tex]x^5 / (1+x^6) = x^5 (1 - x^6 + x^12 - x^18 + ...)[/tex]

To integrate this power series, we can integrate each term separately:

[tex]\int x^5 (1 - x^6 + x^12 - x^18 + ...) dx[/tex]

[tex]= \int x^5 - x^11 + x^17 - x^23 + ... dx[/tex]

[tex]= 1/6 x^6 - 1/12 x^12 + 1/18 x^18 - 1/24 x^24 + ...[/tex]

To approximate the definite integral from 0.4 to 0, we can substitute 0.4 into the power series expansion and integrate term by term:

[tex]I \approx \int 0.4^0 x^5 / (1+x^6) dx[/tex]

[tex]= \int 0.4^0 (x^5 - x^11 + x^17 - x^23 + ....) dx[/tex]

[tex]\approx 1/6 (0.4)^6 - 1/12 (0.4)^12 + 1/18 (0.4)^18 - 1/24 (0.4)^24 + ...[/tex]

Since the power series is an alternating series, we can use the alternating series error bound to estimate the error in our approximation. The error bound for an alternating series is given by the absolute value of the first neglected term.

The first neglected term in our power series expansion is -1/30 (0.4)^30, which has an absolute value of approximately [tex]3.56 \times 10^{-18}[/tex]

Therefore, our approximation of the definite integral to six decimal places is:

[tex]I \approx 1/6 (0.4)^6 - 1/12 (0.4)^12 + 1/18 (0.4)^18 - 1/24 (0.4)^24[/tex]

= 0.064687.

For similar question on definite integral.

https://brainly.com/question/27746495

#SPJ11