Answer:2725
Explanation:
a recursive function is a function that: group of answer choices calls itself, directly or indirectly. returns a double. is inside of another function. takes 3 arguments.
A recursive is a function that eventually calls itself.
Base recursive functions are defined as the recursive functions where the last statement performed is the recurrent call.
Recursive function: what is it?
A recursive function is a function which explains that one that generates a series of phrases by repeating or using its own prior term as input. The math sequence, which has presence of some words with a following differences between them, is typically the basis on which we study about this function.
How does a recursive function operate?
The function is defined as something which is repeatedly through recursion within the function. Until and unless we have the base case which is satisfied, the recursive condition makes repeated calls to the function. The base case is contained in the function, and it causes the execution to stop when its condition is met.
To know more about recursive function:
brainly.com/question/23896867
#SPJ4
A)How much heat does it take to increase the temperature of 2.10 molmol of an ideal gas by 60.0 KK near room temperature if the gas is held at constant volume and is diatomic?
B)What is the answer to the question in part A if the gas is monatomic?
A) It would take 2079 J of heat to increase the temperature of 2.10 mol of a diatomic gas by 60.0 K at a constant volume.
B) It would take 1244 J of heat to increase the temperature of 2.10 mol of a monatomic gas by 60.0 K at a constant volume.
What is the difference between diatomic and monoatomic?The terms "diatomic" and "monoatomic" describe how many atoms make up a molecule or an ion. Diatomic molecules, like O2 or HCl, are made up of two covalently connected atoms of the same element. On the other hand, monoatomic species are made of a single atom, which could be neutral like helium or argon or charged like cations and anions. Diatomic molecules have unique chemical properties and are frequently involved in chemical processes, whereas monoatomic species normally exist as gases under normal conditions and are relatively inert. In the study of chemistry and physics, the contrast between diatomic and monoatomic particles is significant, particularly in understanding the behavior of various elements and their interactions with other substances.
(A) To calculate the amount of heat required to increase the temperature of 2.10 mol of a diatomic gas by 60.0 K at constant volume, we can use the formula: Q = nCvΔT
where Q is the amount of heat, n is the number of moles of the gas, Cv is the molar heat capacity at constant volume, and ΔT is the change in temperature. For a diatomic gas, Cv = (5/2)R, where R is the gas constant.
So, substituting the given values, we get:
Q = (2.10 mol)(5/2)(8.31 J/mol·K)(60.0 K)
Q = 2079 J
Therefore, it would take 2079 J of heat to increase the temperature of 2.10 mol of a diatomic gas by 60.0 K at a constant volume.
B) For a monatomic gas, Cv = (3/2)R. So, using the same formula as above, we get:
Q = (2.10 mol)(3/2)(8.31 J/mol·K)(60.0 K)
Q = 1244 J
Therefore, it would take 1244 J of heat to increase the temperature of 2.10 mol of a monatomic gas by 60.0 K at a constant volume.
To know more about diatomic and monoatomic, check out:
https://brainly.com/question/16789083
#SPJ4
) To calculate the amount of heat required to increase the temperature of 2.10 mol of a diatomic gas by 60.0 K at constant volume, we can use the formula:
Q = nCvΔT
where Q is the amount of heat, n is the number of moles of the gas, Cv is the molar heat capacity at constant volume, and ΔT is the change in temperature. For a diatomic gas, Cv = (5/2)R, where R is the gas constant.
So, substituting the given values, we get:
Q = (2.10 mol)(5/2)(8.31 J/mol·K)(60.0 K)
Q = 2079 J
Therefore, it would take 2079 J of heat to increase the temperature of 2.10 mol of a diatomic gas by 60.0 K at constant volume.
B) For a monatomic gas, Cv = (3/2)R. So, using the same formula as above, we get:
Q = (2.10 mol)(3/2)(8.31 J/mol·K)(60.0 K)
Q = 1244 J
Therefore, it would take 1244 J of heat to increase the temperature of 2.10 mol of a monatomic gas by 60.0 K at constant volume.
Question 10 of 10
A car drives to the right. There is a large amount of air resistance, and the
car's engine provides the car's forward motion. Which force on the free-body
diagram below represents the weight of the car?
A. Force C
B. Force B
C. Force D
D. Force A
The free-body diagram that will represent the weight of the car is the one in which the weight of the car points downwards.
What are free-body diagrams?Free-body diagrams are diagrams used in physics and engineering to represent an object and the forces acting on it. They are used to analyze the forces and determine the net force acting on an object, which is then used to determine the object's acceleration and motion.
The free-body diagram of the car will be as follows:
a large amount of air resistance - acts to the leftcar's engine provides the car's forward motion - acts to the rightweight of the car - acts downwardsnormal reaction - acts upwardsLearn more about free-body diagrams at: https://brainly.com/question/17849049
#SPJ1
Even when shut down after a period of normal use, a large commercial nuclear reactor transfers thermal energy at the rate of 150 MW by the radioactive decay of fission products. This heat transfer causes a rapid increase in temperature if the cooling system fails (1 watt = 1 joule/second or 1 W = 1 J/s and 1 MW = 1 megawatt).
(a) Calculate the rate of temperature increase in degrees Celsius per second (
∘
C/s) if the mass of the reactor core is 1.60
×
10
5
kg and it has an average specific heat of 0.3349 kJ/kg
∘
⋅
C.
(b) How long would it take to obtain a temperature increase of 2000
∘
C, which could cause some metals holding the radioactive materials to melt? (The initial rate of temperature increase would be greater than that calculated here because the heat transfer is concentrated in a smaller mass. Later, however, the temperature increase would slow down because the 5
×
10
5
-kg steel containment vessel would also begin to heat up.)
(a) The rate of temperature increase is about 1.40 degrees Celsius per second. (b) It would take about 1428.57 seconds or 23.81 minutes to obtain a temperature increase of 2000 degrees Celsius.
(a) The rate of temperature increase can be calculated by first finding the total energy being transferred per second by the decay of fission products, which is 150 MW. This is equivalent to 150 x 10⁶ J/s. Then, we can use the formula:
rate of temperature increase = (energy transferred per second) / (mass x specific heat)
Plugging in the values, we get:
rate of temperature increase = (150 x 10⁶ J/s) / (1.60 x 10⁵ kg x 0.3349 kJ/kg∘C)
rate of temperature increase ≈ 1.40∘C/s
Therefore, the rate of temperature increase is about 1.40 degrees Celsius per second.
(b) To find the time it would take to obtain a temperature increase of 2000 degrees Celsius, we can use the formula:
time = (change in temperature) / (rate of temperature increase)
Plugging in the values, we get:
time = (2000∘C) / (1.40∘C/s)
time ≈ 1428.57 s
Therefore, it would take about 1428.57 seconds or 23.81 minutes to obtain a temperature increase of 2000 degrees Celsius.
Learn more about radioactive decay here: brainly.com/question/1770619
#SPJ4
Complete question:
Even when shut down after a period of normal use, a large commercial nuclear reactor transfers thermal energy at the rate of 150 MW by the radioactive decay of fission products. This heat transfer will cause a rapid increase in temperature if the cooling system fails.
(a) Calculate the rate of temperature increase, in degrees Celsius per second (°C/s), if the mass of the reactor core is 1.4 × 105 kg and it has an average specific heat of 0.3349 kJ/(kg.°C).
(b) How long, in minutes, would it take for the temperature to increase by 2000°C, which could cause some metals holding the radioactive materials to melt? (The initial rate of temperature increase would be greater than that calculated here because the heat transfer is concentrated in a smaller mass. Later, however, the temperature increase would slow down because the 5 x 105-kg steel containment vessel would also begin to heat up.)
the silicon sample has been uniformly illuminated with light resulting in an optical generation rate is?
The optical generation rate of a silicon sample illuminated with light is the rate at which photogenerated carriers are created in the sample.
Optical generation rate is typically expressed in units of A/cm2. The optical generation rate is a function of the light intensity, the wavelength of the light, and the material properties of the silicon sample. The rate of generation of electron-hole pairs through photon absorption is known as "optical generation rate". Optical generation rate is usually denoted by G(x) and in unit of electrons/cm³s.
To know more about light intensity please refer:
https://brainly.com/question/30499504
#SPJ4
Multiple Choice: Suppose the electric field is zero in a certain region of space. Which of the following statements best describes the electric potential in this region?
a) The electric potential is zero everywhere in this region.
b) The electric potential is zero at at least one point in this region.
c) The electric potential is constant everywhere in this region.
d) There is not enough information given to distingush which of the above answers is correct.
Option c) is correct as in a region where electric field is zero, electric potential is constant and independent region location.
The statement that best describes the electric potential in a region of space where the electric field is zero is (c) the electric potential is constant everywhere in this region.
This can be explained by the fact that:
electric potential is amount of work done to get a unit charge from infinity to a particular point in electric field. When electric field is zero, there's zero force acting on charge and therefore work done is zero.
In such a scenario, the electric potential is said to be constant throughout the region because the amount of work required to move as charge one to another point doesn't depend on path. Any path will have no charge and thus potential difference will become zero.
Learn more about electric field here:
https://brainly.com/question/15800304
#SPJ4
An object that can move in either direction along a horizontal line ( the positive axis). Assume that friction is so small that it can be neglected. Sketch the shape of the graph of the force applied to the object that would produce the motion described.
A) The object moves away from the origin with a constant velocity.
B)The object moves toward the origin with a constant velocity.
C) The object moves away from the origin with a steadily increasing velocity (a constant acceleration)
A) and B): No force whenever, F(t) = 0, ∀t. C): A constant force,
F(t) = F0,∀t.
Newton's Laws
In the year 1687, Isaac Newton distributed his fundamental work "Philosophiae Naturalis Principia Mathematica", in which he included three essential standards of movement. These standards are referred to now as Newton's maxims or Newton's laws.
A) and B): No force whenever,
F(t) = 0, ∀t.
As indicated by Newton's most memorable regulation, an article moves with constant velocity when no net force is following up on it.
C): A constant force,
F(t) = F0,∀t.
As indicated by Newton's subsequent regulation, the speed increase is corresponding to the acting force. Assuming that the speed increase is constant, the force is constant.
to know more about Newton's law click here:
https://brainly.com/question/28171613
#SPJ4
Aluminum metal can be recycled from scrap metal by melting the metal to evaporate impurities. Calculate the amount of heat needed to purify 1.00 mole of Al originally at 298 K by melting it. The melting point of Al is 933K. The molar heat capacity of Al is 24 JI(mol K), and the heat of fusion of Al is 10.7 kJlmol: b_ The equation for the overall process of extracting Al from Al,O3 is shown below: Which requires less energy, recycling existing Al or extracting Al from Al,03? Justify your answer with a calculation_ 2AIzO3 (s) 2 Al (s) 302 (g) AH= 1675 kJ
Energy extraction generally refers to the process of obtaining useful energy from a particular source or converting one form of energy to another. This can include extracting energy from fossil fuels, nuclear reactions, wind, solar power, hydropower, or other sources.
In the context of the given question about aluminum production, "energy extraction" refers specifically to the process of obtaining aluminum metal from its ore, which in this case is Al2O3. This process requires a significant amount of energy, as indicated by the high value of the heat of reaction in the equation given in the question. By contrast, recycling aluminum from scrap metal requires much less energy and is therefore generally considered to be more energy-efficient and environmentally friendly than extracting aluminum from its ore.
To calculate the amount of heat needed to purify 1.00 mole of Al originally at 298 K by melting it, consider two processes:
1. Heating the Al from 298 K to its melting point at 933 K, which requires heat Q1:
Q1 = n * Cp * delta T
= 1.00 mol * 24 J/(mol K) * (933 K - 298 K)
= 20,832 J
2. Melting the Al at its melting point, which requires heat Q2:
Q2 = n * delta H_fus
= 1.00 mol * 10.7 kJ/mol
= 10,700 J
The total heat required to purify 1.00 mole of Al by melting it is the sum of Q1 and Q2:
Q_total = Q1 + Q2
= 20,832 J + 10,700 J
= 31,532 J
Now, to determine whether it is more energy-efficient to recycle existing Al or to extract Al from Al2O3, compare the energy required for each process. The equation for extracting Al from Al2O3 shows that the reaction releases 1675 kJ of energy for every 2 moles of Al produced. Therefore, the energy required to extract 1 mole of Al from Al2O3 is:
energy required = 1675 kJ / 2
= 837.5 kJ
Comparison to the 31,532 J of energy required to melt and purify 1 mole of Al, we see that recycling existing Al requires significantly less energy than extracting Al from Al2O3.
Specifically, the energy required to extract 1 mole of Al from Al2O3 is approximately 219 times greater than the energy required to purify 1 mole of existing Al by melting it.
To know more about Energy Extraction, visit:
https://brainly.com/question/14547281
#SPJ4
4) Collision in which K.E and momentum of system remain same is called__________
(*)Elastic Collision
(*) Inelastic collision
(*) Conserved collision
(*) Linear collision
A collision that is elastic occurs when there is no net loss of kinetic energy in the system as a result of the collision. Kinetic energy and momentum are both conserved in elastic collisions.
Give an example of an elastic collision.When two balls collide at a pool table, that is an instance of an elastic collision. When you throw a ball on the ground and it bounces back into your hand, there is no net change in the kinetic energy, making it an elastic collision.
Give an illustration of what an elastic collision is.Two balls colliding at a pool table is an example of an elastic collision. When a ball is tossed to the ground and subsequently returns to your hand, there is no net change in the kinetic energy, making it an elastic collision.
To know more about collision visit:
brainly.com/question/12550364
#SPJ1
circulation of heat in the oceans and atmosphere is an example of energy movement through _________________.
Circulation of heat in the oceans and atmosphere is an example of energy movement through convection.
What is convection?The movement of heat energy through a fluid is known as convection. This kind of heating is most frequently seen in the kitchen, typically with a liquid that is brought to a boil. The air that makes up the atmosphere behaves like a fluid. The rocks are warmed up as a result of the sun's radiation penetrating the ground.
As a result of conduction, the temperature of the rock will increase, which will cause heat energy to be released into the environment. This will result in the formation of a bubble of air that is warmer than the air around it. This pocket of air climbs into the atmosphere and continues its journey. The heat that was held within the bubble dissipates into the atmosphere as it rises, causing the bubble to gradually become cooler.
To learn more about convection, click here:
https://brainly.com/question/12864792
#SPJ4
Suppose that a right-moving em wave overlaps with a left-moving em wave so that, in a certain region of space, the net electric field in the y direction and magnetic field in the z direction are given by Ey = E0 sin(kx-wt)+E0 sin(kx+wt) and Bz =B0 sin(kx-wt)+B0 sin(kx+wt). (a) Find the mathematical expression that represents the standing electric and magnetic waves in the y and z directions, respectively. (b) Determine the Poynting vector and find the x locations at which it is zero at all times.
The standing wave can be obtained by taking the sum of the two traveling waves with equal amplitude and opposite phase velocities. To do this, we can use the trigonometric identity:
How to use wave amplitude?sin(A) + sin(B) = 2 cos((A+B)/2) sin((A-B)/2)
Applying this identity to the electric field Ey, we get:Ey = 2 E0 cos(wt) sin(kx)
This represents a standing wave with nodes (zero amplitude) at x = nλ/2k, where n is an integer.
Similarly, for the magnetic field Bz, we have:
Bz = 2 B0 cos(wt) sin(kx)
This also represents a standing wave with nodes at the same positions as the electric field.(b) The Poynting vector represents the flow of energy of the electromagnetic wave and is given by:S = E x B
where x represents the vector cross product. Substituting the expressions for E and B, we get:
S = E0 B0 sin^2(kx) / μ0
where μ0 is the permeability of free space.
The Poynting vector is zero when sin^2(kx) = 0, which occurs at x = nπ/k for n an integer. This represents positions where the electric and magnetic fields are out of phase and the energy flow is momentarily zero.
To know more about wave amplitude , check out :
https://brainly.com/question/19036728
#SPJ4
newtons ring experiment for engineering
Newton's ring is a phenomenon of interference pattern of the light rays which is created by reflection of light rays.
What is Newton's ring experiment?Newton's rings is a phenomenon in which an interference pattern of the light is generally created by the reflection of light rays between the two surfaces, typically a spherical surface and an adjacent touching flat surface in space.
Newton's rings, in optics, is a series of concentric light- and dark-colored bands which are observed between any two pieces of glass when one is convex and it rests on its convex side on another piece which is having a flat surface. Thus, a layer of air exists between the two.
Newtons ring experiment is used for the determination of wavelength of monochromatic lights. It is also used for the determination of refractive index of transparent liquid.
Learn more about Newton's ring experiment here:
https://brainly.com/question/16979383
#SPJ9
Calculate the work that must be done on charges brought from infinity to charge a spherical shell of radius R = 0.100 m to a total charge Q = 125 μC.
The work that must be done on charges brought from infinity to charge a spherical shell of radius R = 0.100 m to a total charge Q = 125 μC = 1.12 x 10⁶ J
The potential difference of the charge is the amount of work required to bring a unit positive charge from infinity.
V = E x d
= k (q/r)
where;
V = The potential difference (J)
E = The field potential (N/C)
d = The distance that the charge (m)
k = Coulomb constant (8.99 x 10⁹ Nm²/C²)
q = The unit charge
r = radius
Hence,
The work done:
= (8.99 x 10⁹ Nm²/C²) (125 x 10–⁶) / 0.1
= 1.12 x 10⁶ J
Learn more about work done here: https://brainly.com/question/30391011
#SPJ4
what is the velocity of a rock if it falls at a 3m/s
3m/s downward is the velocity of a rock if it falls at a 3m/s. The idea of velocity is crucial in kinematics, the part of physical laws.
What is velocity?The direction speed of an item in motion as an indicator of it's own rate of shift in position as perceived from a certain frame of reference and measured by a specific standard of time (e.g., 60 km/h northbound) is known as velocity.
The idea of velocity is crucial in kinematics, the part of physical laws that explains the motion of things. 3m/s downward is the velocity of a rock if it falls at a 3m/s.
Therefore, 3m/s downward is the velocity of a rock if it falls at a 3m/s.
To learn more about velocity, here:
https://brainly.com/question/80295
#SPJ9
A pool ball moving 1.83 m/s
strikes an identical ball at rest.
Afterward, the first ball moves
1.15 m/s at a 23.3° angle. What is
the x-component of the velocity of
the second ball?
Answer:n to the right to the right
Explanation:
If a car is pushed with a force of 18N for 8m, how much work has been done?
According to the question, the work done by a car is calculated as 144Nm.
What is force?Force may be defined as a process of pushing or pulling on an object that significantly produces acceleration in the body on which it acts. It is an external agent capable of changing a body's state of rest or motion. It has a magnitude and a direction.
According to the question,
The force applied on a car = 18 N
The displacement made by a car = 8m.
Now, the work done is calculated with the help of the given formula:
Work done = Force × Displacement.= 18 N × 8m = 144Nm.
Therefore, the work done by a car is calculated as 144Nm.
To learn more about Force and displacement, refer to the link:
https://brainly.com/question/28356414
#SPJ9
A capacitor consists of two metal plates each 10 cm by 20 cm; they are separated by a 2.0 mm thick insulator with dielectric constant 4.1 and dielectric strength 6.0107 V/m. What is the capacitance in pF(10 −12
F)?
The equation gives the capacitance of a parallel-plate capacitor:C = εA/d. Where C is the capacitance, ε is the permittivity of the dielectric material between the plates, A is the area of each plate, and d is the distance between the plates.
In this case, the area of each plate is 10 cm × 20 cm = 200 cm^2 = 0.02 m^2. The distance between the plates is 2.0 mm = 0.002 m. The permittivity of the dielectric material is ε = ε0εr, where ε0 is the vacuum permittivity (8.85 × 10^-12 F/m), and εr is the relative permittivity or dielectric constant (4.1).
So, substituting these values into the equation, we get:
C = εA/d
= (ε0εr)(0.02)/(0.002)
= (8.85 × 10^-12)(4.1)(0.02)/(0.002)
= 7.26 × 10^-11 F
= 72.6 pF
Therefore, the capacitance parallel-plate capacitor is 72.6 pF.
To learn more about parallel-plate capacitor, visit here
https://brainly.com/question/12733413
#SPJ4
The type of ion channel that will open and close depending on changes in electrical potential across the membrane is referred to as _________________. Those ion channels that require a chemical messenger to bind to them in order to open or close are called____________________. voltage-gated; mechanically-gated ligand-gated; stretch-gated voltage-gated; ligand-gated ligand-gated; voltage-gated stretch-gated; ligand-gated
The type of ion channel that will open and close depending on changes in electrical potential across the membrane is referred to as voltage-gated. In this case the word “voltage” is already telling you that it functions with electrical potential
Those ion channels that require a chemical messenger to bind to them in order to open or close are called ligand-gated. The word “ligand” tells you that there is a compound (chemical messenger) that is ligand of a receptor, once it binds with the receptor, the channels will be active.
To know more about Ion Channel, visit: brainly.com/question/29415412
#SPJ4
A parallel plate capacitor with plates of area A and plate separation d is charged so that the potential difference between its plates is V. If the capacitor is then isolated and its plate separation is decreased to d/2, what happens to the potential difference between the plates? A) The final potential difference is 4V B) The final potential difference is 2V. C) The final potential difference is 0.51 D) The final potential difference is 0.25V E) The final potential difference is V.
The new potential difference when the distance between the plates vary is calculated to be 0.5 V. Correct option is C.
The parallel plate capacitor's area is denoted by the letter A.
Distance between the plates is d.
Potential difference is V.
If the distance is reduced to d/2, the potential difference is to be found out.
We know that, Q = C V
To find out potential difference, make it as subject,
V = Q/C
From the above equation, it is seen that, capacitance is inversely proportional to potential difference.
So, V C = k
where,
k is contant
The parallel plate capacitor's capacitance is stated as,
C = εA/d
When the distance apart is d. Then, C₁ = εA/d
When the distance is half d/2
C₂ = εA/(d/2)
C₂ = 2εA/d
Then, applying V C = k
V₁ is voltage of the full capacitor V1 = V
V₂ is the required voltage let say V'
Then,
V₁ C₁ = V₂ C₂
V × εA/d=V' × 2εA/d
VεA/d = 2V'εA/d
Then the εA/d cancels on both sides and remains
V = 2V'
Then, V' = V/2
Thus, the potential difference is half when the distance between the parallel plate capacitor was reduce to d/2.
To know more about potential difference:
https://brainly.com/question/13404382
#SPJ4
HELPPPPP MEE
LATE SCIENCE WORK
The true statement about the motion of the helicopter is " the helicopter travels at a greater speed between D and E than it did between A and B.
option D.
What is motion?
Motion is the process of an object changing its position with respect to a reference point over time. It involves the movement of an object from one point in space to another.
Motion can be described in terms of its speed, direction, and acceleration. Speed refers to the rate at which an object is moving, while direction refers to the path that the object is following. Acceleration refers to the rate at which an object's speed or direction changes.
v = Δx / Δt
where;
Δx is change in positionΔt is change in timeThe change in position of the helicopter between A and B = 0
because, A = 100 m and B = 100 m
so the speed of the helicopter between A and B = 0 m/s.
Thus, the last statement is the only correct option,
Learn more about motion here: https://brainly.com/question/25951773
#SPJ1
which of the following changes will result in a larger frequency for an oscillating spring-mass system?
An increase in the spring constant changes will result in a larger frequency for an oscillating spring-mass system.
About mass -spring systemThe mass spring system is a system composed of objects that have mass and are connected to springs. The spring circuit can be composed of several springs mounted in series or parallel as needed. Springs connected in series will decrease the value of the spring constant, while the installation of springs in parallel will increase the value of the spring constant.
Spring system formation is a simple spring system formation arranged in series or parallel. The stages of the research carried out included determining the mathematical equation for mass movement determined from the equilibrium position in the formation of a spring system, including a spring system of a mass connected to two springs arranged in series, a spring system of a mass connected to two springs arranged in parallel and a spring system of two masses. connected by two springs arranged in series, then create a spring system simulation program.
Learn more about spring mass at
https://brainly.com/question/23312582
#SPJ4
what a geologist sees. a geology student sits beside an outcrop on mont royal, the namesake of montreal. this exposure shows the intrusion of molten basalt into preexisting limestone.
The geologist sees depositional contact. Therefore, option A is correct.
What is depositional contact?A sedimentary or volcanic rock is said to have been deposited on an older rock at a depositional contact (of any type). Where volcanic rocks encroach on older rock, this is known as an intrusive contact (of any type).
The ten different types of contacts are as follows: (1) bedding planes, (2) diastems, (3) angular irregularities, (4) disconformities, (5) para-conformities, (6) nonconformities, (7) pedologic contacts, (8) faults, 9) intrusive contacts, and 10) extrusive contacts.
Hence, option A is correct.
Learn more about depositional contact, here:
https://brainly.com/question/9000638
#SPJ1
your question is incomplete, most probably the full question is this:
what a geologist sees. a geology student sits beside an outcrop on mont royal, the namesake of montreal. this exposure shows the intrusion of molten basalt into preexisting limestone.
. How much work does it take to accelerate an 8.0-kg bowling ball from rest to a speed of 12 m/s!
a. If the average force on the bowling is 230 N, what is the distance through which it must
be accelerated to reach a speed of 12 m/s?
The work done on the bowling ball is 576 J to accelerate an 8.0-kg bowling ball from rest to a speed of 12 m/s and a distance of 2.5 m to reach a speed of 12 m/s if the average force on the bowling ball is 230 N.
What is the calculation of the work done?Work = 1/2 × m × [tex]v^2[/tex]
( m =8 kg=is the mass, v= 12 m/s= is final velocity)
Work = 1/2 × 8.0 kg × [tex](12 m/s)^2[/tex] = 576 J
As per work-energy principle, the work done on an object = the change in its kinetic energy
Work = ΔKE
(ΔKE = change in kinetic energy, initial kinetic energy=0)
final kinetic energy is,
KE = 1/2 × m × [tex]v^2[/tex] = 1/2 × 8.0 kg × [tex](12 m/s)^2[/tex] = 576 J
the change in kinetic energy,
ΔKE = KE - 0 = 576 J (work is equal to force here)
So, Work = Force × Distance
Distance = Work / Force = 576 J / 230 N = 2.5 m
As a result, the work done on the bowling ball is 576 J to accelerate and travel 2.5 m with an 8.0-kg bowling ball.
Learn more about the calculation of the work done here.
https://brainly.com/question/16976412
#SPJ1
a) Write a selected signal assignment statement to represent the 4-to-1 MUX shown below. Assume that there is an inherent delay in the MUX that causes the change in output to occur 15 ns after a change in input.
(b) Repeat (a) using a conditional signal assignment statement.
Selected signal assignment statement to represent the 4-to-1 MUX has been shown below.
a)entity mux4to1 is
port(A,B: in std_logic;
CD : in std_logic_vector(1 down to 0),
F: out std_logic);
end mux4to1;
Architecture behavioral of mux4to1 is
begin
with CD select
F<= transport (not A) after 10 ns when "00",
transport B after 10 ns when "01",
transport (not B) after 10 ns when "10",
transport "0" after 10 when "11";
end behavioral;
b)entity mux4to1 is
port(A,B: in std_logic;
CD : in std_logic_vector(1 down to 0),
F: out std_logic);
end mux4to1;
Architecture behavioral of mux4to1 is
begin
F <= inertial (not A) after 10 ns WHEN (CD = “00”) ELSE
inertail B after 10 ns WHEN (sel = “01”) ELSE
inertail (not B) after 10 ns WHEN (sel = “10”) ELSE
inertail "0" after 10 ns WHEN (sel = “11”) ELSE
‘X’;
end behavioral;
c)entity mux4to1 is
port(A,B: in std_logic;
CD : in std_logic_vector(1 down to 0),
F: out std_logic);
end mux4to1;
Learn more about 4-to-1 MUX here brainly.com/question/15052768
#SPJ4
An object is launched from the origin with a velocity of 10.0 m/s at an angle of 30.0 degrees above the horizontal. What is the velocity of the object 2.00 seconds later? A. Vx=8.7 m/s, Vy=-14.6 m/s B. Vx - 14.6 m/s, Vy=-5.6 m/s C. Vx = -8.7 m/s, Vy=-14.6 m/s D. Vx-14.6 m/s. Vy - 8.7 m/s E. Vx = 5.6 m/s, Vy=-14.6 m/s
The velocity of the object both horizontally and vertically at 2.00 seconds is (A) 8.7 m/s and - 14.6 m/s. The result is obtained by us using formula for projectile motion.
How to find horizontal and vertical velocity of projectile motion?In horizontal motion, the velocity is not affected by the gravitational acceleration. It can be calculated by
vx = v₀ cos θ
In vertical motion, the velocity is affected by the gravitational acceleration. It ca be expressed as
vy = v₀ sin θ - gt
An object is moving in projectile motion.
we have:
initial velocity, v₀ = 10.0 m/sAngle above the horizontal, θ = 30°Time, t = 2.00 sThe horizontal velocity of the object is
vx = 10.0 × Cos 30°
vx = 10.0 × ½ √3
vx = 5√3
vx = 8.7 m/s
The vertical velocity of the object is
vy = v₀ sin 30 - gt
vy = 10.0 (½) - 9.8 (2.00)
vy = 5 - 19.6
vy = - 14.6 m/s
Hence, the velocity of the object is vx = 87 m/s and vy = - 14. m/s.
The correct option is (A).
Learn more about projectile motion here:
brainly.com/question/30579228
#SPJ4
The kinetic energy is 4400 joules. The mass is 29 kg. What is the speed?
Answer:F=6*10\4N
Explanation:the 4 is th sqaer
A physics instructor walks with increasing speed across the front of the room, then suddenly reverses direction and walks backwards with constant speed. Which of the following graphs correctly depicts the acceleration vs. time of the physics instructor?
According to the physics professor's acceleration vs. time graph, a change in speed could also mean a change in velocity.
What is acceleration, using an example?An object's velocity may alter depending on whether it is moving faster, slower, or in a different direction. The moon orbiting the earth and an apple falling to the ground are two instances of acceleration.
What exactly are velocity and acceleration?The pace at which displacement changes is known as velocity. The rate at which velocity changes is known as acceleration. Because it includes both magnitude and direction, mass and velocity quantity. Since acceleration is merely the rate at which velocity changes, acceleration is likewise a vector quantity.
To know more about Acceleration visit:
https://brainly.com/question/30660316
#SPJ1
a plane wall is 250mm thick and it's wall area is 4.5m^2. if the thermal conductivity is 9.35w/m°c and surface temperature are steady at 150°c and 40°c. calculate the heat flow across the plane wall and the temperature gradient in the flow direction
The temperature gradient in the flow of direction is 294525 W.
What is Temperature gradient?A temperature gradient is the gradual variance in temperature with distance. The slope of the gradient is consistent within a material. A gradient is established anytime two materials at different temperatures are in physical contact with each other.
Q= T/( L/ KA)
Q= ( 1500 − 450) / 0.15 / 9.35v * 4.35)
= 294525 W
Units of measure of temperature gradients are degrees per unit distance, such as °F per inch or °C per meter.
Many temperature gradients exist naturally, while others are created. The largest temperature gradient on Earth is the Earth itself. Q= T/Ka.
Therefore, The temperature gradient in the flow of direction is 294525 W.
To learn more about Temperature gradient, refer to the link:
https://brainly.com/question/13020257
#SPJ9
Allison exerts a steady net force of 54 N on a 24-kg
shopping cart initially at rest for 2.6 s. find the distance.
Answer:
Approximately [tex]7.6\; {\rm m}[/tex] while the force was applied.
Explanation:
Divide net force by mass to find acceleration:
[tex]\begin{aligned}(\text{acceleration}) &= \frac{(\text{net force})}{(\text{mass})} = 2.25\; {\rm m\cdot s^{-2}}\end{aligned}[/tex].
(Note that [tex]1\; {\rm N} = 1\; {\rm kg\cdot m\cdot s^{-2}}[/tex].)
The question states that this acceleration of [tex]a = 2.25\; {\rm m\cdot s^{-2}}[/tex] continued for [tex]t = 2.6\; {\rm s}[/tex]. Additionally, it is given that initial velocity was [tex]u = 0\; {\rm m\cdot s^{-1}}[/tex] (initially at rest.)
Let [tex]x[/tex] denote the distance travelled. Apply the SUVAT equation [tex]x = (1/2)\, a\, t^{2} + u\, t[/tex] to find this distance:
[tex]\begin{aligned}x &= \frac{1}{2}\, a\, t^{2} + u\, t \\ &= \frac{1}{2}\, (2.25)\, (2.6)^{2}\; {\rm m} + (0)\, (2.6)\; {\rm m} \\ &= \frac{1}{2}\, (2.25)\, (2.6)^{2}\; {\rm m} \\ &\approx 7.6\; {\rm m}\end{aligned}[/tex].
The motion of the kangaroo is under free-fall. We are looking for the initial velocity, and we know that the velocity in the highest position is zero.
From
v
2
=
(
v
0
)
2
+
2
ay
,
v 2
=(v 0
) 2
+2ay,
we have
v
2
=
(
v
0
)
2
+
2
ay
v
2
−
2
ay
=
(
v
0
)
2
v
0
=
v
2
−
2
ay
v 2
v 2
−2ay
v 0
=(v 0
) 2
+2ay
=(v 0
) 2
= v 2
−2ay
Substituting the known values,
v
0
=
v
2
−
2
ay
v
0
=
0
2
−
2
(
−
9.81
m/s
2
)
(
2.50
m
)
v
0
=
7.00
m/s
v 0
v 0
v 0
= v 2
−2ay
= 0 2
−2(−9.81m/s 2
)(2.50m)
=7.00 m/s
Therefore, the vertical speed of the kangaroo when it leaves the ground is 7.00 m/s.
Part B
Since the motion of the kangaroo has uniform acceleration, we can use the formula
y
=
v
�
t
+
1
2
a
t
2
y=v o
t+ 2
1
at 2
The initial and final position of the kangaroo will be the same, so �
y is equal to zero. The initial velocity is 7.00 m/s, and the acceleration is -9.81 m/s2.
y
=
v
0
t
+
1
2
a
t
2
0
=
(
7.00
m/s
)
t
+
1
2
(
−
9.81
m/s
2
)
t
2
0
=
7
t
−
4.905
t
2
7
t
−
4.905
t
2
=
0
t
(
7
−
4.905
t
)
=
0
t
=
0
or
7
−
4.905
t
=
0
y
0
0
7t−4.905t 2
t(7−4.905t)
t=0
=v 0
t+ 2
1
at 2
=(7.00 m/s)t+ 2
1
(−9.81 m/s 2
)t 2
=7t−4.905t 2
=0
=0
or7−4.905t=0
Discard the time 0 since this refers to the beginning of motion. Therefore, we have
7
−
4.905
t
=
0
4.905
t
=
7
t
=
7
4.905
t
=
1.43
s
7−4.905t
4.905t
t
t
=0
=7
= 4.905
7
=1.43 s
The kangaroo is about 1.43 seconds long in the air.
The motion of the kangaroo is under free-fall, its vertical speed when it leaves the ground 7.00m/s and it is in air for 1.43s.
The stir of the kangaroo is under free- fall. We're looking for the original haste, and we know that the haste in the loftiest position is zero.
From,
v ² = ( vo) ² 2ay,
we have,
v ² = ( vo) ² 2ay,
v ²- 2ay = vo ²
vo = √ v ²- 2ay
Vo = 7.00 m/ s
thus, the perpendicular speed of the kangaroo when it leaves the ground is 7.00 m/s.
Since the stir of the kangaroo has invariant acceleration, we can use the formula,
y = vo * t1/2 at ²
7t-4.905 t ²
t = 0 or t = 1.43
thus, kangaroo is about 1.43 seconds long in the air.
Learn more about Vertical speed question:
https://brainly.com/question/30462853
#SPJ4
Complete question:
A kangaroo can jump over an object 2.50 m high. (a) Calculate its vertical speed when it leaves the ground. (b) How long is it in the air?