A tugboat T having a mass of 19 Mg is tied to a barge B having a mass of 75 Mg. If the rope is "elastic" such that it has a stiffness k = 600 kN/m. Using the Conservation of Energy Equation determine the maximum stretch in the rope during the initial towing Originally both the tugboat and barge are moving in the same direction with speeds (v tau)i =15 km/h and (vb)t = 10 km/h. respectively. First use the Conservation of Momentum Equation to find final velocity of the tug & barge after stretching the rope fully. Neglect the resistance of the water.

The speed of the car in the remaining one third of the time is 25 m/sec.

The speed of the car during two-third(2t/3) of the total time= 10 m/sec

Average speed of the car during the entire journey = 15 m/sec

Let the total time taken by the car during the entire journey = t sec.

Average speed of an object is defined as the ratio of the total distance and the total time taken by the object during the entire journey.

Average speed = total distance/total time

Total distance = Average speed of the object × total time taken by the object

Total distance = 15×t = 15t

Distance covered during the 2t/3 time = 10×2t/3 = 20t/3

Remaining distance = 15t - 20t/3

= 25t/3

Remaining time = t- 2t/3 = t/3

So the speed during the remaining journey = (25t/3)/(t/3)

= 25 m/sec.

To know more about speed, here

https://brainly.com/question/22610586

#SPJ4

The instantaneous angular speed of a spinning amusement park is 0.70rad/sec.

The definition of angular speed is the rate at which angular displacement changes.

To find the instantaneous angular speed of the spinning ride, we can use the equation:

ωf = ωi + αt

where ωf is the final angular speed, ωi is the initial angular speed, α is the angular acceleration, and t is the time.

Given that:

ωi = 0.50 rad/s

α = 0.20 rad/s²

t = 1.0 s

so, we can substitute these values into the equation and solve for ωf:

ωf = 0.50 rad/s + (0.20 rad/s² * 1.0 s)

ωf = 0.50 rad/s + 0.20 rad/s

ωf = 0.70 rad/s

The instantaneous angular speed of the spinning ride is 0.70 rad/s after 1s of constant angular acceleration of 0.20 rad/s².

To know more about angular speed, visit:

brainly.com/question/29058152

#SPJ1

Electric Vehicles (EVs) and Hybrid Electric Vehicles (HEVs) use a range of different cooling systems to ensure that their batteries, motors, and other components are kept at optimal temperatures.

Generally, EVs and HEVs use air-cooling systems that draw air over the components to keep them from overheating. Some EVs and HEVs also have liquid-cooling systems, which use coolant to more efficiently dissipate heat away from the components.

Additionally, some EVs and HEVs use a combination of both air and liquid cooling systems for maximum efficiency.

Electric Vehicles (EVs) and Hybrid Electric Vehicles (HEVs) have different cooling systems to keep their batteries and motors running optimally.

To learn more about cooling, click here:

https://brainly.com/question/28520368

#SPJ4

Answer:

H = Vy t - 1/2 g t^2     height after time t

Vy t = H + 1/2 g t^2

Vy = H / t + 1/2 g t

Vy = -1 / 3.6 + 4.9 * 3.6 = 17.4 m/s      initial vertical speed

Vx = 50 / 3.6 = 13.9 m/s

tan θ = 17.4 / 13.9 = 1.25    θ = 51.4 deg

Ball should be kicked at 51.4 deg

V = (17.4^2 + 13.9^2)^1/2 = 22.3 m/s         initial speed

As a check use range formula

R = 22.3^2 sin 102.8 / 9.80 = 49.5 m

That is slightly less than 50m as it should be since its height would be zero after being given the initial speed

The statement "before each trial one should reshape the bob into something like a ball" is false regarding the experiment.

If we assume the collision between the bob and the box is completely inelastic, then shape of the bob does not play any role in the time period of the plumb bob or the collision impact of the bob on the box. However the second statement which says that the initial position for the box should be just touching the pendulum bob, is true. This is because then initial position of the bob will become the mean position and we know at the mean position the kinetic energy of the bob is maximum.

For the third statement, the pendulum bob should hit close to the bottom of the box during the collision to make the box move, is also true. This is because the bottom surface experiences the maximum friction force, which can be reduced at maximum amount if bob impact closer to the bottom.  

To know more about reshape, here

https://brainly.com/question/8799327

#SPJ4

To reduce fuel consumption while maintaining vehicle performance, driver comfort, and component constraints energy management control system is required in HEV.

A supervisory algorithm, also known as an energy management strategy, is necessary for hybrid vehicles to control the different parts of the drivetrain. Usually, when designing an energy management strategy, we face two challenges.

First off, the nonconvex cost function produced by the components' nonlinear behavior makes the employment of optimization techniques more challenging. There are several methods mentioned for dealing with nonconvexity.

Second, it is unknown what the future power and velocity trajectories will be. Using historical or projected vehicle velocity and road grade trajectories to forecast future trajectories could aid in finding a solution that is close to ideal.

Want to know more about HEV visit the link which is given below;

https://brainly.com/question/28221757

#SPJ4

Time of 6.667 seconds is required for the fan to come to rest at constant angular acceleration.

Rotational velocity, sometimes referred to as angular frequency vector, is a pseudovector that depicts how quickly an object's angular position or orientation varies over time and is termed as angular velocity.

To find:

now we know that[tex]w= 0\frac{rev}{s}[/tex] ,[tex]w0\frac{25}{3 \ }\frac{rev}{s}[/tex] and α = [tex]\frac{5}{4}\frac{rev}{8^{2} }[/tex]

t= 0-25/3 whole upon -5/4

t= 6.667s

Hence, time of 6.667 seconds is required for the fan to come to rest at constant angular acceleration.

To know more about angular velocity visit:

https://brainly.com/question/29557272

#SPJ4

The complete question is :

An electric fan is turned off, and its angular velocity decreases uniformly from 500 rev/min to 200 rev/min in 4.00 s.

(a) Find the angular acceleration in rev/s^2 and the number of revolutions made by the motor in the 4.00-s interval.

(b) How many more seconds are required for the fan to come to rest if the angular acceleration remains constant at the value calculated in part (a)?

According to the given statement the object has covered 400 meters distance has it covered.

The point where light rays from an object meet, or appear to meet after reflection or refraction, is sometimes referred to as the image. In this concept, a "object" might be anything that light rays are emanating from.

To find the distance covered by an object as it increases its speed from 0 to 40 meters per second in 20 seconds, we can use the formula:

Distance = (Initial speed + Final speed) x Time / 2

In this instance, the time is 20 seconds, the beginning speed is 0 m/s, and the ultimate speed is 40 m/s. With these values entered into the formula, we obtain:

Distance = (0 + 40) x 20 / 2 = 800/2 = 400 meters

So the object has covered 400 meters.

To know more about Object visit:

https://brainly.com/question/1045556

#SPJ4

We can describe the sew speed as, calculate the measured stitches per unit and divide by reduction ratio.

Sewing machines are invented during the first Industrial Revolution to decrease the amount of manual sewing work performed in clothing companies. The speed is an important issue for sewing. All machines are not same, all operators are not equal experienced in production, quality expectation, stitch type, etc.

Since the invention, the efficiency and productivity of the clothing industry has been greatly improved. Now various types of sewing machines are used for sewing depending on different stitches. Most of them are automatic and run by motor.

When stitch is formed, three things come into factor such as needle thread, fabric types and bobbin thread or looper thread (Webster et al., 1998). Seam strength completely depends on quality of fabric and sewing machine.

Sewing thread needs to choose according to the properties of fabric (Chowdhary et al., 2006). Since seam strength is dependent on the thread strength, a reduction in thread strength during sewing will lead to lower seam strength.

To know more about sew speed here

https://brainly.com/question/14674764

#SPJ4

Where Vp is the primary voltage, Vs is the secondary voltage, Np is the number of loops in the primary coil, and Ns is the number of loops in the secondary coil.

To learn more about primary coil refer to:

https://brainly.com/question/19485792

#SPJ1

The volume of water released and the height of fall strongly influences the amount of energy generated from hydropower.

Hydropower is an alternative energy for generating electrical power by utilizing water to power machines.

In simple terms, Hydropower or water power is energy produced from flowing water.

In fact, water will not decrease when it is used in the energy utilization process. The reason is, the water cycle is an infinite and continuous recharging system, hydropower is considered a renewable energy. Apart from being more go green, the use of water can support a better natural cycle but must be accompanied by supporting equipment.

Some hydroelectric power plants are powered by the kinetic energy of flowing water as it moves downstream. Turbines and generators convert energy into electricity, which is then fed to the electrical grid for use in homes, businesses, and industry.

With the presence of hydropower energy, a country especially like Indonesia which is rich in natural resources is very effective in using this natural energy to make electricity.

In addition to abundant water that can be used for free, hydropower also produces clean energy without pollution and free from air pollution. This energy source is also always renewed automatically by nature when the rainy season arrives. Therefore, so that water is not wasted, the government must provide extra proper drainage facilities both for the needs of the hydropower cycle and for drainage to the sea.

It doesn't always bear fruit, it turns out that the existence of Hydropower also has a negative side effect which needs to be an important note.

Viewed from the negative side, this water-dependent power source can damage marine life and natural resources. Migration patterns of fish will be disrupted which will eventually damage fish populations. Another consequence of hydropower is the decrease in oxygen levels in the water which endangers fish habitat. If there is no special review, the marine ecosystem will collapse so that people's lives can be disrupted.

Learn more about hydropower at https://brainly.com/question/22258411.

#SPJ4

The delay vector for node F as follows:

F: [5, 2, ∞, ∞, ∞, 0, ∞, ∞]

This means that the estimated delay from node F to node A is 5, to node B is 2 and to node F itself is 0. And all other nodes are unreachable.

The Distance Vector Routing algorithm, also known as Bellman-Ford algorithm, is used to calculate the shortest path from a given source node to all other nodes in a network.

To calculate the new estimated delays from node F, we first initialize the delay vector for node F as follows:

F: [0, ∞, ∞, ∞, ∞, ∞, ∞, ∞]

Next, we update the delay vector for node F using the delay vectors received from its neighbors. For example, using the information provided in here, we can update the delay vector for node F as follows:

F: [5, 2, ∞, ∞, ∞, 0, ∞, ∞]

This means that the estimated delay from node F to node A is 5, to node B is 2 and to node F itself is 0. And all other nodes are unreachable.

We then repeat this process of updating the delay vector until the estimates converge and no further updates are required.

This is a simplified process and in real world scenario there will be more number of nodes and edges, and also the cost of each edge will be different.

Learn more about The Distance Vector Routing here:

https://brainly.com/question/29105702

#SPJ4

Arrow starting from the dot, pointing away from the dot in the direction of the crane's motion. Force of the crane lifting the box: Arrow starting from the dot, pointing away from the dot in the upward direction.

What is the Crane?

The Crane is a machine used in construction and engineering to lift and move heavy objects. It is usually composed of a tall, rotating arm with a hoist at the end, operated by an operator in a cab. Cranes come in a variety of sizes, from small models that can lift a few hundred pounds to huge machines that can move thousands of tons at once. Most cranes are attached to a fixed structure, such as a building or pier. Cranes can also be mounted on vehicles, such as trucks, to move around a worksite. Cranes are essential tools in the construction industry, as they allow workers to move large objects with ease and speed. Cranes are also used in a variety of other industries, such as manufacturing, shipbuilding, and material handling.

This force is the result of the crane pushing the box forward at a constant speed of 5 m/s.

This force is the result of the crane lifting the box with an upward acceleration of 1 m/s.

To learn more about Crane

https://brainly.com/question/14765960

#SPJ4

The player serving the ball is the server.

option C is the correct answer.

The right back player of the serving team shall be the first server of the game. In volleyball, the serving player will always be the player that is standing in position 1.

After the right back player of the serving team start the serving process of the game, afterwards the player rotating from the right forward to the right back position shall be the server (clockwise rotation). Rotation occurs after opponents side-out.

Thus, the player that serves the ball is known as the server.

Learn more about server of ball here: https://brainly.com/question/11482132

#SPJ1

Answer: 115 N

Explanation:

In this case, the ball has a weight of 15 N (force due to gravity) acting on it and the cannon is shooting it with a force of 100 N.

To find the net force on the ball, we add the forces acting on it.

Net force = force due to gravity + force due to the cannon

Net force = 15 N + 100 N

Net force = 115 N

So, the net force on the ball will be 115 N. ✅

PLEASEEEE GIVE BRANLIEST

The two masses of the Jakku and earth are of no use. The ratio of their acceleration due on gravity is 9 : 1

Gravitational Field strength can be defined as the ratio of gravitational force to unit mass.

Given that Jakku has half the density of earth and 1/3 the radius. What is the ratio of the acceleration due on gravity on Jakku to that of Earth’s?

The acceleration due on gravity is the same as gravitational Field strength. That is,

g = GM/r²

The gravitational Field strength of Jakku of radius r/3 will be

g = GM/(r/3)²

g = GM/(r²/9)

g = 9GM/r²

The gravitational Field strength of earth of radius r will be

g = GM/r²

The mass M is the mass of the sun. The ratio of the acceleration due to gravity on Jakku to that of Earth’s will be

9GM/r² ÷ GM/r²

9/1 or 9 : 1

Therefore, the ratio of the acceleration due to gravity on Jakku to that of Earth’s is 9 : 1

Learn more about Gravitation Field Strength here: https://brainly.com/question/27914629

#SPJ1

Representations of Each Part are:

The objects inside the system are the two boxes, they should be circled with a dotted circle.

Free-body diagrams showing and labeling the forces (not components) exerted on each box. Draw the relative lengths of all vectors to reflect the relative magnitudes of all the forces and identify the external forces.

Sketch a graph of the net external force vs. t for each box on the same axis will using two different colors and providing a key.

Using the equation for the area of a rectangle, A= bh, the area of the rectangle between the net external force vs. time line and the x-axis on the graph created in Part C can be written as:

With words: The area of the rectangle is equal to the base times the height.

With units: A = (Fnet)(t) N × s

Re-represent the data above by creating a momentum diagram for each box on the same set axes by using two different colors and providing a key. (A momentum diagram represents the momentum of an object or system by showing the mass of the object as the width of bar on the chart, and the velocity of the object as the height of the bar.

This part whether the impulse given to the first box while it is speeding up is greater than, less than, or the same as the impulse given to the second box while it is speeding up. Impulse is the product of force and time and it is the change in momentum.

To determine the ranking of the impulse given to the two boxes, we would need to know the specific forces applied to each box and the duration of time over which those forces were applied. The impulse experienced by an object is the product of the force applied and the time over which it was applied. Without this information, it is not possible to determine whether the impulse given to the first box was greater than, less than, or the same as the impulse given to the second box.

Learn more about Forces and Impulse here:

https://brainly.com/question/28439437

#SPJ4

The equation relating voltage, current and resistance is V = IR, this is because voltage in a circuit increases with increase in current and resistance and vice versa.

Ohm's law states that the current flowing in a conductor is directly proportional to the voltage across the conductor.

Mathematically, the formula for Ohm's law is given as;

V = IR

where;

The given data

Voltage ( V )       Current ( I )      Resistance ( R)

4                               2                          2

12                              8                          4

6                               3                           3

From the equation given above, the voltage in the circuit increases with increase in the current and resistance and decreases with decrease in the current and resistance.

Learn more about ohm's law here: https://brainly.com/question/231741

#SPJ1

Answer:

To calculate the coefficient of kinetic friction between the block and the ramp, you would need to know the force of kinetic friction acting on the block as it slides down the ramp.

This force can be determined using the equation:

F_friction = friction_coefficient * F_norm

where F_friction is the force of kinetic friction, friction_coefficient is the coefficient of kinetic friction, and F_norm is the normal force acting on the block.

The normal force, F_norm, is equal to the weight of the block, which is the force of gravity acting on the block. This can be calculated using the equation:

F_norm = m * g * cos(theta)

where m is the mass of the block, g is the acceleration due to gravity (approximately 9.8 m/s^2), and theta is the angle of incline of the ramp.

In this case, we know the following values:

mass: 14.26 kg

angle of incline: 41 degrees

velocity: 2.361 m/s^2

By using the law of Kinetic Friction force = friction coefficient * Normal force,

friction_coefficient = F_friction / F_norm

You can then solve for the coefficient of kinetic friction by measuring the force of friction. or by measuring the acceleration of the block and using the equations of motion.

Uday Tahlan

The ball will continue according to the concept of Inertia and in a straight line according to Newton's first law of motion.

It states that, an object at rest or in a linear motion will continue to be at rest or in its linear motion except an external force act on it.

Given that a ball is attached to a string and spun in a circular path.

In a circular motion, the speed of the object is the same but the velocity is not because the object tend to move in a different straight line direction.

If the string snaps and the ball continues outward from that point in a straight line path, The Newtonian concept that explain this is the concept of Inertia that emanate from the First Newton's Law of Motion

Therefore, the correct answer is First Newton's Law of Motion

Learn more about Newton's Laws here: https://brainly.com/question/25545050

#SPJ1

The variation of temperature 437°C ,if Sara fire in the fireplace to warm her 20°C apartment.

What temperature can I refuse to work in?

Although there's no legally defined maximum or minimum temperature for working, health and safety guidance is that a reasonable temperature should usually be at least 16°C. If much of the work involves a lot of physical effort, it's 13°C.

What temperature is too hot for humans?

People often point to a study published in 2010 that estimated that a wet-bulb temperature of 35 C – equal to 95 F at 100 percent humidity, or 115 F at 50 percent humidity – would be the upper limit of safety, beyond which the human body can no longer cool itself by evaporating sweat from the surface of the body

To know more about temperature visit

https://brainly.com/question/24283056

#SPJ1

A box being moved across the room by a mover. A pool chair is blown across the yard by wind. A barbell is raised off the ground by a weightlifter.

Do weightlifters have strength?

Flexibility is important. In addition to being exceptionally strong and powerful, weightlifters are also very flexible. In fact, they are some of the most flexible athletes. To perform this same lifts with the required ranges of motion, extreme levels of versatility are needed.

Is lifting weights a skill?

Lifting weights is a skill. Additionally, it is preferable to study, acquire, and hone talents when you are rested and alert. You'll have to have some gas left in the barrel if you desire to be able to study it again in only a few of days.

To know more about weightlifter visit:

https://brainly.com/question/21077643

#SPJ1

Answer:when you lifting weights

Explanation:

The angular velocity of the wheel at the beginning of the 4 s interval is calculated as 3 rad/s.

Given that,

Angular speed of turntable = 2.25 rad/s²

Time of motion, t = 4.0 s

Angular displacement, θ = 60 rad

The wheel's angular velocity at the start of the 4 second period is computed as follows,

θ = ωi t + 1/2 α t²

where, ωi is initial angular velocity

30 = ωi (4) + 1/2 × 2.25 ×4²

4 ωi + 18 = 30

4 ωi = 12

ωi = 3 rad/s

Thus, the angular velocity of the wheel at the beginning of the 4 s time is 3 rad/s.

To know more about angular velocity:

https://brainly.com/question/16912873

#SPJ4

The net electric force on particle q2 is 27.81 N.

The net force on the particle q2 is calculated by applying Coulomb's law of electrostatic force.

The force on particle q1 due to particle q2 is calculated as;

F ( 12 ) = kq₁q₂/r²

where;

F ( 12 ) = ( 9 x 10⁹ x 18 x 10⁻⁶ x 11.2 x 10⁻⁶ ) / ( 0.28² )

F ( 12 ) = 23.14 N

The force on particle q3 due to particle q2 is calculated as;

F (23) = kq₃q₂/r²

F (23) = (9 x 10⁹ x 5.67 x 10⁻⁶ x 11.2 x 10⁻⁶)/(0.35²)

F (23) = 4.67 N

The net electric force on particle q2 is calculated as follows;

F (net) = 23.14 N + 4.67 N

F (net) = 27.81 N

Learn more about electric force here:https://brainly.com/question/17692887

#SPJ1

The work required to lift the block with a force of 2.2 · 10⁴ N at the distance/displacement of 2 meters is equal to 44,000 joules.

Force, according to Newton's law of motion, is equal to mass times acceleration. Newton is the standard unit of force. For an object to accelerate, there must be a net force acting on it.

When a force acts on an object and makes it move, the object is said to transfer energy. This is called work in physics. Mathematically speaking, work W is equal to force F times distance x (W = F · x). Joule is the standard unit of work.

Suppose that F equals 2.2 · 10⁴ newtons and x equals 2 meters. The work done is calculated as follows:

W = F · x

W = 2.2 · 10⁴ · 2

W = 44,000 joules

We have confirmed that the work needed to lift the block is equal to 44,000 joules.

Learn more about the definition of work here: https://brainly.com/question/14813637.

#SPJ4

The average force exerted on the pillow -32 N.

Force is an external influence that can change the velocity or motion of an object.

The momentum of an object is the product of its mass and velocity.

So, in the case of an 8-kg bowling ball rolling at 2 m/s, the momentum would be: momentum

= 8 kg x 2 m/s

= 16 kg m/s

To calculate the average force that the bowling ball exerts on the pillow, we can use the equation:

force = change in momentum / change in time

The change in momentum is equal to the final momentum minus the initial momentum.

Since the bowling ball is rolling at 2 m/s and stops in 0.5s,

we can assume that its final momentum is 0 (since it stops moving) and the initial momentum is 16 kg m/s.

change in momentum = final momentum - initial momentum

= 0 - 16 kg m/s

= -16 kg m/s

change in time = 0.5s

So,

force = -16 kg m/s / 0.5 s

= -32 N (Newton)

Therefore the average force exerted on the pillow is -32 N.

the question is incomplete, the complete question is "What is the momentum of an 8-kg bowling ball rolling at 2 m/s? If the bowling ball rolls into a pillow and stops in 0.5 s, calculate the average force it exerts on the pillow".

To know more about force,

https://brainly.com/question/11583448

#SPJ4

Answer:

The speed of a wave is given by the equation:

Speed = Frequency x Wavelength

Given that the frequency of the wave is 5 Hz and the wavelength is 0.75 m, we can substitute these values into the equation:

Speed = 5 Hz x 0.75 m

Speed = 3.75 m/s

Therefore, the speed of the wave generated on the slinky is 3.75 m/s.

It's important to note that the speed of a wave depends on the properties of the medium through which it travels and not on the properties of the source of the wave.

Answer:

  The speed is  3.75

Explanation:

The relationship between wavelength and frequency is described by this simple equation:

                            λ = v/f

wave length (T) = 0.75m

frequency (f) = 5Hz

                      0.75 = v / 5

                       0.75*5 = v

                      v=3.75

When Jeff ran up a hill at 7.0 m/s, the vertical component of his velocity was 4.8 m/s and the horizontal component of his velocity vector was 5.1 m/s.

The direction of movement of the body or item is defined by velocity. Speed is fundamentally a scalar number. Velocity is, in essence, a vector quantity. It is the pace at which distance changes. It is the displacement rate of change. Speed is the pace at which an item moves along a route in time, whereas velocity is the rate and direction of movement. In other words, velocity is a vector, whereas speed is a scalar number. Simply put, velocity is the rate at which something travels in a certain direction. For example, the speed of a car driving north on a highway or the speed of a rocket after launch.

Here,

the vertical component of Jeff's velocity,

=√7²-5.1²

=4.8 m/s

The vertical component of Jeff's velocity is 4.8 m/s when Jeff ran up a hill at 7.0 m/s, the horizontal component of his velocity vector was 5.1 m/s.

To know more about velocity,

https://brainly.com/question/13407154

#SPJ1

According to the given statement He ends up 100m to the left of its starting point.

Acceleration is the rate of change of velocity over time, or the change in speed and direction of an object. It can be measured in meters per second squared (m/s²).

He starts at rest 3 meters to the right, and after 10 seconds it is traveling 2 meters per second to the left.

To find out where he ends up, we can use the equation for distance: distance = initial velocity x time + (1/2) x acceleration x time^2.

Since the he starts at rest, its initial velocity is 0 m/s. he is moving to the left, so its acceleration is -2 m/s^2 (negative because he is moving in the opposite direction).

Therefore, the distance he  travels :

-distance = 0 x 10s + (1/2) x (-2 m/s^2) x (10s)^2

-distance = -100m

So he ends up 100m to the left of its starting point.

To learn more about acceleration refer:

https://brainly.com/question/12550364

#SPJ1