A typical neutron star has a mass of about 1.5Msun and a radius of 10 kilometers Calculate the average density of a neutron star. Express your answer in kilograms per cubic centimeter to two significant figures.

Answer: The position from which three-fourths of the illuminated side of the moon will be visible from Earth is an option (B) - Gibbous.

Explanation: The Moon appears gibbous when more than half but not all of its illuminated side is visible from Earth.

The Moon is a celestial body that orbits Earth as Earth's only permanent natural satellite. The Moon is one of the brightest and largest objects in the night sky, with a diameter of 3,475 km.

The Moon appears to change shape as it orbits Earth, going through several phases throughout the lunar month. The illuminated side of the moon is the portion of the moon that is lit up by the sun.

The Moon is not actually glowing, but rather it reflects sunlight. We cannot see the Moon when it is not illuminated.

The Moon's phases depend on its position relative to the Sun and Earth, causing the illuminated side of the Moon to face Earth from different angles.

Thus, the position from which three-fourths of the illuminated side of the moon will be visible from Earth is an option (B) - Gibbous.

Learn more about illumination here:

https://brainly.com/question/28914020

#SPJ11

Earth would form a layer around the neutron star with a thickness of 6.2 km.

Mass of the neutron star = 1.5 MSun. Radius of the neutron star = 10 km. Let's assume that the layer formed by Earth has the same average density as the neutron star. Since the mass of the neutron star is 1.5 MSun, this means that Earth will wrap around the neutron star's surface in a spherical shell over the surface of the neutron star whose mass is equal to the mass of the Earth.

Let's first calculate the volume of the neutron star, VNS:VNS = (4/3)πr³= (4/3)π(10 km)³= 4,188.8 km³. We can now calculate the mass of the neutron star, MNS, using its average density, D, which is:

We know that the thickness, h, of the shell is needed to calculate the volume, Vshell, of the spherical shell with the same mass as Earth. The volume of a spherical shell is approximately its surface area times its thickness: Vshell=4πr^2.h, so we can now use the above equation to calculate h.h = Vshell / (4πr²)= MEarth / (D × 4πr²). Where MEarth is the mass of the Earth. MEarth = 5.97 × 10²⁴ kgD = MNS / VNS = (6,283.2 MSun) / (4,188.8 km³) = 1.50 × 10¹⁷ kg/km³r = 10 km. Putting in these values:h = (5.97 × 10²⁴ kg) / (1.50 × 10¹⁷ kg/km³ × 4π(10 km)²) = 6.2 km.

Therefore, Earth would form a layer around the neutron star with a thickness of 6.2 km.

Learn more about The Surface Area: brainly.com/question/17093154

#SPJ11

Answer:

i actually giggled at that oml.

Explanation:

that was good

In order for the net gravitational force on particle A from particles B, C, and D to be zero, particle D must be placed at x = 0, y = 4d, and z = 0.

This can be calculated using Newton's law of universal gravitation, which states that the gravitational force between two objects is directly proportional to the product of their masses, and inversely proportional to the square of the distance between them. Therefore, the net gravitational force can be calculated by considering the gravitational force between each pair of particles and summing the results.

For particle A, the gravitational force due to B, C, and D will be:

FAB = (G*m*2m) / (d²) ,

FAC = (G*m*2m) / ((-d)²) ,

FAD = (G*m*2m) / ((y-d)²).

For particle D, the gravitational force due to B, C, and A will be:

FDB = (G*2m*m) / (d²) ,

FDC = (G*2m*m) / ((-d)²) ,

FDA = (G*2m*m) / ((y-d)²).

Adding these forces together and equating them to zero yields the coordinates for particle D: x = 0, y = 4d, and z = 0.

Learn more about gravitational force at: https://brainly.com/question/12528243

#SPJ11

Answer:

The impulse of the ball hitting the wall can be calculated using the impulse-momentum theorem, which states that the impulse of a force is equal to the change in momentum it produces:

Impulse = Change in momentum

The change in momentum of the ball can be calculated as follows:

Change in momentum = Final momentum - Initial momentum

The final momentum of the ball can be calculated using the mass and velocity of the ball after bouncing off the wall:

Final momentum = mass x velocity

Final momentum = 0.45 kg x (-28 m/s) (since the ball is moving to the left)

Final momentum = -12.6 kg m/s

The initial momentum of the ball can be calculated using the mass and velocity of the ball before hitting the wall:

Initial momentum = mass x velocity

Initial momentum = 0.45 kg x 38 m/s (since the ball is moving to the right)

Initial momentum = 17.1 kg m/s

Therefore, the change in momentum of the ball is:

Change in momentum = -12.6 kg m/s - 17.1 kg m/s

Change in momentum = -29.7 kg m/s

Since impulse is equal to the change in momentum, the impulse of the ball hitting the wall is:

Impulse = Change in momentum

Impulse = -29.7 kg m/s

Therefore, the impulse of the ball hitting the wall is 29.7 kg m/s to the left.

Explanation:

The speed of rotation which is required to simulate the Earth's gravity in this space station is approximately 88.4 m/s.

When future space stations rotate, they create an artificial gravity. Let's suppose a space station is constructed as a cylinder with a diameter of 1600 m that rotates about its axis, with the inside surface being the deck of the space station.

The centripetal force of the rotation provides the artificial gravity. The magnitude of this force is:

F = mv²/r,

where, m is the mass of the object, v is the speed of rotation, and r is the radius of rotation. The force is perpendicular to the direction of motion and towards the center of rotation.

To calculate the speed of rotation required to simulate Earth's gravity (g = 9.81 m/s²), we need to first find the radius of rotation. The radius is half the diameter of the cylinder, so it is r = 800 m.

F = mv²/r
mg = mv²/r
v² = gr
v = √(gr)
v = √(9.81 m/s² × 800 m)
v = 88.4 m/s

Therefore, the speed of rotation required to simulate Earth's gravity in this space station is 88.4 m/s.

Learn more about Centripetal force here:

https://brainly.com/question/14249440

#SPJ11

To complete the lab assignment on Electromagnetic Induction, first click the links to open the resources provided.

This will help you complete the task.

After creating the file(s) and once you are ready to submit your assignment,

click the 'Add Files' button and select each file from your desktop or network folder.

Remember to upload each file separately. Once you have uploaded the files, click 'Submit' to submit your work to your teacher.

In this lab, you are expected to understand and apply the concept of Electromagnetic Induction.

Electromagnetic Induction is a process where a varying magnetic field creates an electric field.

The electric field then induces a current in a nearby circuit. This current is caused by Faraday's law of induction.

To know more about Electromagnertic induction; https://brainly.com/question/27613726

#SPJ11

The center of mass of the system is 2.75 meters from the 2 kg mass. The rotational inertia of the system at the end with the 2 kg mass is 6 kg. This can be calculated with the help of mass and distance.

The total mass of the system, the total mass is:  2 kg + 6 kg = 8 kg.

To find the center of mass, we will divide the mass of each end by the total mass and multiply it by the length of the rod. For the 2 kg mass, we get:

(2/8) × 3m = 0.75m.

For the 6 kg mass, we get (6/8) × 3m = 2.25m.

The center of mass is the sum of the two distances, or 2.75m from the 2 kg mass.
The rotational inertia of the system when rotated about the end with the 2 kg mass is:

I = (1/3) × 2 kg × (3m)² = 6 kg m².
The rotational inertia of the system when rotated about the end with the 6 kg mass is:

I = (1/3) × 6 kg × (3m)² = 18 kg m².

The rotational inertia of the system when rotated about the center of the rod is:

I = (1/2) × 8 × (1.5m)² = 12 kg m².
The rotational inertia of the system when rotated about the center of mass is:

I = (1/2) × 8 kg × (2.75m)² = 24.5 kg m².

Learn more about Center of mass here:

https://brainly.com/question/28996108

#SPJ11

Extrasolar Neptune-sized planets likely have big compositional differences when compared to our own Neptune because they have measured densities that span a factor of 1000.

Neptune is the fourth-largest planet in our solar system, and it is a gas giant similar to Jupiter, Saturn, and Uranus. An extrasolar Neptune-sized planet (also known as an exo-Neptune) is a planet that is Neptune-sized but orbits a star other than the sun.

Exo-Neptunes are often observed using the transit technique, in which the planet passes in front of the star, causing a small drop in brightness that can be detected by telescopes on Earth. As a result, their densities can be calculated by measuring their mass and size.

Exo-Neptunes have measured densities that span a factor of 1000, meaning that their compositions can be vastly different from that of our own Neptune, which has a density of 1.64 g/cm³. This suggests that they may have different formation histories, be composed of different materials, or have different atmospheric conditions.

Learn more about transit technique here: https://brainly.com/question/31111698

#SPJ11

The force of the SUV's bumper on the truck's bumper would be 18,000 N.

The bumper on the truck is pushing the bumper of the SUV, which is acting as a reaction force back on the truck's bumper. According to Newton's Third Law, if the truck applies a forward force to the SUV, the SUV will apply an equal and opposite force back on the truck. Therefore, at this acceleration the force of the SUV's bumper on the truck's bumper would be the same as the forward force applied by the truck, which is 18,000 N.This is because the two vehicles are in contact with each other, so the force applied by one is equal and opposite to the force applied by the other.

Learn more about force and acceleration at : https://brainly.com/question/19414080

#SPJ11

Yes, the values found in parts (a) and (b) are consistent with the fact that tidal effects with earth have caused the moon to rotate with one side always facing earth.

This is because part (a) states that the moon rotates on its axis in the same amount of time it takes to complete one orbit around the Earth, which is a phenomenon known as tidal locking. Part (b) further indicates that the same side of the moon always faces the Earth, further supporting the notion that tidal effects have caused the moon to rotate with one side always facing Earth.

More on tides: https://brainly.com/question/14376024

#SPJ11

The force exerted by the 4 kg block on the 6 kg block can be is 0 N

Step-by-step explanation:

Newton's Third Law states that for every action there is an equal and opposite reaction. This means that the force exerted by the 4 kg block on the 6 kg block is equal in magnitude and opposite in direction to the force exerted by the 6 kg block on the 4 kg block.

Mass of first block ([tex]m_1[/tex]) = 2 kg

Mass of second block ([tex]m_2[/tex]) = 4 kg

Mass of third block ([tex]m_3[/tex]) = 6 kg

Force applied (F) = 56 N

To find: The force exerted by the 4 kg block on the 6 kg block

Let's assume that the blocks are numbered 1, 2, and 3 from left to right. Then, the force applied to the 2 kg block is given as: [tex]F_1[/tex] = 56 N

According to Newton's Third Law of Motion, the force exerted by block 1 on block 2 ([tex]F_1[/tex] on 2) and the force exerted by block 2 on block 1 ([tex]F_2[/tex] on 1) will be equal and opposite in direction. This means that:

[tex]F_1[/tex] on 2 = [tex]- F_2[/tex] on 1

This can be rearranged to give: [tex]F_2[/tex] on 1 = [tex]- F_1[/tex] on 2

Substituting the values, we get: [tex]F_2[/tex] on 1 = -56 N

Similarly, the force exerted by block 2 on block 3 ([tex]F_2[/tex] on 3) and the force exerted by block 3 on block 2 ([tex]F_2[/tex] on 2) will be equal and opposite in direction. This means that: [tex]F_2[/tex] on 3 = [tex]- F_3[/tex] on 2

This can be rearranged to give: [tex]F_3[/tex] on 2 = [tex]- F_2[/tex] on 3

Now, to find the force exerted by the 4 kg block on the 6 kg block ([tex]F_4[/tex] on 6), we need to determine the force exerted by the 6 kg block on the 4 kg block ([tex]F_6[/tex] on 4). Since the force exerted by the 4 kg block on the 6 kg block is equal in magnitude and opposite in direction to the force exerted by the 6 kg block on the 4 kg block, we can use the value of [tex]F_6[/tex] on 4

to find [tex]F_4[/tex] on 6. Using Newton's Second Law of Motion,

we know that : F = ma

Where F is the force applied,

m is the mass of the object, and

a is the acceleration produced by the force.

[tex]F_1[/tex] on 2 = -56 N is the net force on block 2 since no other external forces are acting on it.

Using the same equation for blocks 2 and 3: [tex]F_2[/tex] on 3 = [tex]-F_1[/tex] on 2 = 56 N

Since the blocks are on a frictionless surface, the net force on the system of three blocks is equal to:

[tex]F_n_e_t[/tex] = [tex]F_1 + F_2 + F_3[/tex] = m * a

Where, [tex]F_1[/tex] = 56 N (force applied to the 2 kg block)

[tex]F_2[/tex] = -56 N (force exerted by the 2 kg block on the 4 kg block)

[tex]F_3[/tex] = 56 N (force exerted by the 4 kg block on the 6 kg block)

m = 2 + 4 + 6 = 12 kg (total mass of the three blocks)

a = [tex]F_N_e_t[/tex]/m = (56 - 56 + 56) / 12 = 0 N/kg

Since the system is frictionless, the force required to accelerate each block is the same. This means that the force exerted by block 6 on block 4 ([tex]F_6[/tex] on 4) is equal in magnitude and opposite in direction to the force exerted by block 4 on block 6 ([tex]F_4[/tex] on 6).

Using the same equation as before:

[tex]F_4[/tex] on 6 = [tex]-F_6[/tex] on 4

Now, to find [tex]F_6[/tex] on 4,

we use the same equation that we used earlier:  F = ma

The mass (m) is now 4 kg since we are considering blocks 4 and 6.

[tex]F_6[/tex] on 4 = m * a

Since the force required to accelerate each block is the same, the acceleration produced by the force applied (56 N) is the same for all three blocks.

Therefore, we can use the value of a that we obtained earlier.

a = 0 N/kg (since the blocks are on a frictionless surface)

[tex]F_6[/tex] on 4 = 4 kg * 0 N/kg = 0 N

Therefore, [tex]F_4[/tex] on 6 = - [tex]F_6[/tex] on 4 = 0 N.

Answer: 0 N.

Learn more about force, mass and friction at : 'Newton’s Laws of Motion' https://brainly.com/question/23011853

#SPJ11

d.It is 3 times bigger It is 9 times bigger. The 3-m telescope has 9 times the light-gathering capacity of the 1-m telescope. It is nine times larger, to be precise.

The light-gathering power of a telescope is directly proportional to the square of its diameter. Therefore, a 3-m telescope has nine times the light-gathering power of a 1-m telescope. This is because the area of the 3-m telescope is nine times greater than the area of the 1-m telescope. In other words, a 3-m telescope can collect nine times more light in the same amount of time than a 1-m telescope. This increased light-gathering power enables the 3-m telescope to observe fainter and more distant objects than the 1-m telescope. Larger telescopes are, therefore, crucial for astronomers to study the most distant and faintest objects in the universe.

learn more about light-gathering power here:

https://brainly.com/question/5935709

#SPJ4

(a) The angular acceleration of the platform can be calculated using the formula:

α = (ω - ω0) / Δθ

where α is the angular acceleration, ω0 is the initial angular speed, ω is the final angular speed, and Δθ is the change in angle.

Substituting the given values, we get:

α = (8.8 rad/s - 2.8 rad/s) / 5.5 rad

α = 1.45 rad/s^2

Hence, the angular acceleration of the platform is 1.45 rad/s^2.

(b) The tangential acceleration of a point on the surface of the platform at the outer edge can be calculated using the formula:

at = R * α

where it is the tangential acceleration and R is the radius of the platform.

Substituting the given values, we get:

at = (0.28 m) * (1.45 rad/s^2)

at = 0.406 m/s^2

Hence, the tangential acceleration of a point on the surface of the platform at the outer edge is 0.406 m/s^2.

(c) The final centripetal acceleration of a point at the outer edge of the platform can be calculated using the formula:

ac = R * ω^2

where ac is the centripetal acceleration and ω is the final angular speed.

Substituting the given values, we get:

ac = (0.28 m) * (8.8 rad/s) ^2

ac = 67.686 m/s^2

Hence, the final centripetal acceleration of a point at the outer edge of the platform is 67.686 m/s^2.

To know more about angular speed:

https://brainly.com/question/28439806

#SPJ4

The required frequency of green light waves when the wavelength and the speed of light are specified is calculated to be 5.77× 10¹⁴ hz.

Wavelength of green light is given as 5.2 × 10⁻⁷ m.

The speed of light is given as 3× 10⁸ m/s.

We know the relation between wavelength, frequency and speed of light as,

λ = c/ν

where,

λ is wavelength

c is speed of light

ν is frequency

To find out frequency, let us make it as subject,

ν = c/λ = (3× 10⁸)/(5.2 × 10⁻⁷) = 0.577 × 10¹⁵ hz = 5.77× 10¹⁴ hz

Thus, the frequency is calculated to be 5.77× 10¹⁴ hz.

To know more about frequency:

https://brainly.com/question/13525134

#SPJ4

The single most important property of a star that determines its evolution is its mass.

A star's mass determines its internal temperature, pressure, and nuclear reactions, which drive its energy production and ultimately its evolution. Low-mass stars, like red dwarfs, have relatively low internal temperatures and undergo a slow process of fusion that can last for trillions of years. On the other hand, high-mass stars, like blue giants, have much higher internal temperatures and undergo fusion much more quickly, leading to a shorter lifespan.

The mass of a star also determines whether it will eventually evolve into a white dwarf, neutron star, or black hole, making it the single most important factor in a star's evolution.

To learn more about mass refer to:

brainly.com/question/30337818

#SPJ4

First, let's prove that if [tex]$\sum_{n=1}^\infty |a_n|$[/tex] is absolutely convergent and [tex]$(b_n)$[/tex] is a bounded sequence, then  [tex]$\sum_{n=1}^\infty a_n b_n$[/tex] is convergent.

Since [tex]$(b_n)$[/tex] is bounded, there exists some positive constant [tex]$M$[/tex] such that [tex]$|b_n| \leq M$[/tex] for all [tex]$n \in \mathbb{N}$[/tex]. Then, for any [tex]$n \in \mathbb{N}$[/tex], we have:

[tex]$$|a_n b_n| \leq |a_n| \cdot |b_n| \leq M \cdot |a_n|$$[/tex]

Since [tex]$\sum_{n=1}^\infty |a_n|$[/tex] is absolutely convergent, we know that [tex]$\sum_{n=1}^\infty M|a_n|$[/tex] is also convergent, by comparison. Thus, by the comparison test, we can conclude that [tex]$\sum_{n=1}^\infty |a_n b_n|$[/tex] is convergent.

Now, to give an example to show that if [tex]$\sum_{n=1}^\infty a_n$[/tex] is conditionally convergent and [tex]$(b_n)$[/tex] is a bounded sequence, then [tex]$\sum_{n=1}^\infty a_n b_n$[/tex] may diverge, consider the following:

Let [tex]$a_n = \frac{(-1)^n}{n}$[/tex] and [tex]$b_n = 1$[/tex] for all [tex]$n \in \mathbb{N}$[/tex]. Then [tex]$\sum_{n=1}^\infty a_n = -\ln(2)$[/tex] is conditionally convergent, and [tex]$(b_n)$[/tex] is clearly a bounded sequence. However,

[tex]$\sum_{n=1}^\infty a_n b_n = \sum_{n=1}^\infty \frac{(-1)^n}{n} = \ln(2)$[/tex]

which diverges.

Finally, to give an example of a convergent series [tex]$\sum_{n=1}^\infty a_n$[/tex]  that [tex]$\sum_{n=1}^\infty |a_{2n}|$[/tex] diverges, consider the following:

Let [tex]$a_n = \frac{(-1)^n}{n}$[/tex] for all [tex]$n \in \mathbb{N}$[/tex]. Then [tex]$\sum_{n=1}^\infty a_n$[/tex] converges conditionally to [tex]$-\ln(2)$[/tex], but [tex]$\sum_{n=1}^\infty |a_{2n}| = \sum_{n=1}^\infty \frac{1}{2n}$[/tex] diverges.

Learn more about convergent series:

https://brainly.com/question/15415793

#SPJ11

True, the indirect method is used to determine total power in a parallel circuit when that power is determined from the total current, total resistance, and source voltage.

The indirect method of calculating power in a parallel circuit is used when it is not feasible to measure the current flowing through each individual resistor. It is found by multiplying the total resistance of the circuit (RT) by the square of the total current (IT), or by using the total voltage (VT) squared and dividing by the total resistance (RT).

The indirect method is used to determine total power in a parallel circuit when that power is determined from the total current, total resistance, and source voltage. The equation to use for this is Power = Voltage x Current. Therefore, the total power in a parallel circuit can be determined by multiplying the source voltage by the total current, divided by the total resistance.

The formula to calculate power is given by P = IV, where P stands for power, I stands for current, and V stands for voltage. Power is usually measured in watts (W), current is measured in amperes (A), and voltage is measured in volts (V).A parallel circuit consists of multiple paths, each containing a resistor.

The current through each resistor in a parallel circuit varies, and each resistor has its own voltage drop. The total resistance of a parallel circuit is less than the smallest resistance in the circuit.

The formula for calculating total power in a parallel circuit is

P = IT² × RT,

where IT is the total current and RT is the total resistance.

This formula assumes that the total voltage of the circuit is known. The formula can also be written as

P = VT²/RT,

where VT is the total voltage in the circuit.

Learn more about indirect methods follow

https://brainly.com/question/26624965

#SPJ11

Burl and Paul have a total weight of 1300 N. The tensions in the ropes that support the scaffold they stand on add to 1800 N. The weight of the scaffold itself must be 500 N.

A scaffold is a temporary structure that is erected to support workers and their equipment when they are performing a job at a height above the ground. In the construction sector, it is widely used, and it is made up of one or more platforms that are supported by a system of frames and poles.

In order to solve the given problem, we'll have to use some mathematical concepts such as addition and subtraction. The total weight of Burl and Paul = 1300 N

The tensions in the ropes that support the scaffold they stand on = 1800 N

Let us suppose that the weight of the scaffold is x.

So, from the given data, we can write down the following equation:

Total weight of Burl, Paul, and the scaffold = Tensions in the ropes + weight of the scaffold

1300 + x = 1800x = 1800 - 1300= 500 N

Therefore, the weight of the scaffold is 500 N.

To learn more about scaffold follow

https://brainly.com/question/14962055

#SPJ11

The maximum speed of the photoelectrons emitted from the clean nickel surface is 6.70 × 10⁵ m/s.

Calculate the energy of a photon.E = hc/λwhere, h = Planck’s constant = 6.626 × 10⁻³⁴ Js, c = speed of light = 3 × 10⁸ m/sE = 6.626 × 10⁻³⁴ × 3 × 10⁸/241 × 10⁻⁹E = 8.21 × 10⁻¹⁸ J

Calculate the kinetic energy of the photoelectrons.

K.E. = E – W₀K.E. = 8.21 × 10⁻¹⁸ J – 5.10 × 1.6 × 10⁻¹⁹ J = 7.09 × 10⁻¹⁹ J

K.E. = 1/2 mv² where, m = mass of photoelectron, v = velocity of photoelectron, and K.E. = kinetic energy of photoelectronv = √(2K.E./m) = √[(2 × 7.09 × 10⁻¹⁹ J)/(9.1 × 10⁻³¹ kg)]v = 6.70 × 10⁵ m/s or 0.224c

So, the maximum speed of the photoelectrons emitted from this surface is 6.70 × 10⁵ m/s.

More on photoelectrons: https://brainly.com/question/16048908

#SPJ11

The circular structures on the surface of the Moon are the result of impact craters formed by the impact of asteroids or comets.

The Moon's lack of atmosphere and tectonic activity means that its surface has remained largely unchanged for billions of years, preserving evidence of the impacts that have occurred over its history. When an object collides with the Moon's surface, it creates a shock wave that radiates outward, blasting away material and creating a circular depression.

The size and shape of the resulting crater depends on the size, speed, and angle of impact, as well as the properties of the target material. These craters provide valuable information about the history of the Moon and the Solar System, as well as insights into the formation and evolution of planetary bodies.

To learn more about collision refer to:

brainly.com/question/14309901

#SPJ4

The point at which the warning will do no good is 7.50 m above the man's ears.

When a water-filled balloon is released from rest at a height of 10.0 m above the ears of a man, the warning will do no good if shouted after the balloon reaches a certain point. Assuming that the air temperature is 20°C and ignoring the effect of air resistance, this point is 7.50 m above the man's ears.

The vertical displacement (d) can be determined using the equation [tex]d = \frac{vf2}{2g}[/tex], where vf is the final velocity and g is the acceleration due to gravity (9.81 m/s2).

Since the balloon was released from rest, the initial velocity is 0 m/s. Therefore, [tex]d = \frac{02 }{ 2} (\frac{9.81 m}{s2} ) = 0[/tex]m. Since the initial height was 10.0 m, the final height is 10.0 m + 0 m = 10.0 m.

The point at which the warning will do no good is 7.50 m above the man's ears, so the final height of the balloon must be 10.0 m - 7.50 m = 2.50 m.

Therefore, the point at which the warning will do no good is 7.50 m above the man's ears.

Learn more about vertical displacement: brainly.com/question/2289543

#SPJ11

Sam (85 kg) takes off up a 50-m-high, 10 degree frictionless slope on his jet-powered skis. The skis have a thrust of 220 N. He keeps his skis tilted at 10 degree after becoming airborne. Sam lands about 109.9 meters from the base of the cliff.

To solve this problem, we can use the conservation of energy principle. At the bottom of the slope, all of Sam's energy is in the form of potential energy:

Potential energy = mgh

where m is Sam's mass (85 kg), g is the acceleration due to gravity [tex](9.81 m/s^2)[/tex], and h is the height of the slope (50 m).

Potential energy = [tex](85 kg) \times (9.81 m/s^2) \times (50 m) = 41,287.5 J[/tex]

As Sam takes off up the slope, his potential energy is converted to kinetic energy and then to a combination of kinetic and potential energy as he becomes airborne. We can use the conservation of energy to find Sam's speed at the top of the slope:

Potential energy at bottom = Kinetic energy at top

[tex]mgh = (1/2)mv^2[/tex]

where v is Sam's speed at the top of the slope.

[tex]v = \sqrt{(2gh)} = \sqrt{(2 \times 9.81 m/s^2 \times 50 m)} = 31.3 m/s[/tex]

Now, we can use Sam's speed and the angle of his skis to find his horizontal velocity:

Horizontal velocity = v cos(theta)

where theta is the angle of the skis after becoming airborne (10 degrees).

Horizontal velocity = 31.3 m/s x cos(10 degrees) = 30.2 m/s

Finally, we can use the horizontal velocity and Sam's hang time to find the distance he travels:

Distance = Horizontal velocity x Hang time

where hang time is the time Sam spends in the air. Hang time can be found using the formula:

Hang time = (2v sin(theta)) / g

Hang time = (2 x 31.3 m/s x sin(10 degrees)) / 9.81 [tex]m/s^2[/tex] = 3.64 s

Distance = 30.2 m/s x 3.64 s = 109.9 m

for such more question on lands

https://brainly.com/question/29820168

#SPJ11

Part A: When the craft is being lowered, the tension in the cable is 6387 N

Part B: When the craft is being raised, the tension in the cable is 5227 N

The weight of the craft will be equal to the force of gravity acting on it, which can be calculated using the mass of the craft and the acceleration due to gravity (g = 9.81 m/s²).

Therefore, the tension in the cable when the craft is being lowered is:

Tension = weight + drag force

Tension = (mass x g) + drag force

Tension = (unknown mass x 9.81 m/s²) + 1800 N

Tension = (unknown mass x 9.81) + 1800 N

Part A When the craft is stationary, the tension in the cable is 5500 N. This means that the weight of the craft is equal to the tension in the cable when it's not moving,

Solving for the mass:

5500 N = (mass x 9.81) + 0 N

mass = 5500 N / 9.81 m/s²

mass = 560.3 kg

Now we can substitute the mass into the expression for tension when the craft is being lowered:

Tension = (mass x 9.81) + 1800 N

Tension = (560.3 kg x 9.81 m/s²) + 1800 N

Tension = 6387 N

Therefore, the tension in the cable when the craft is being lowered to the seafloor is 6387 N.

Part B: When the craft is being raised at a steady rate, the tension in the cable will be equal to the weight of the craft minus the drag force due to the motion through the water.

Using the same mass of the craft that we calculated in Part A, we can calculate the tension in the cable when the craft is being raised:

Tension = weight - drag force

Tension = (mass x g) - drag force

Tension = (560.3 kg x 9.81 m/s²) - 1800 N

Tension = 5227 N

Therefore, the tension in the cable when the craft is being raised from the seafloor is 5227 N.

Learn more about Motion here:

https://brainly.com/question/28205978

#SPJ11

The annual cost of electricity at a billing rate of $0.13 per kWhr for a waterbed heater that uses 450 W of power is $36.51.

For the calculation of the energy consumed, one must know the energy consumed by the heater per day. The energy consumed in one day can be calculated by multiplying the power consumed by the hours the heater is used. The power consumed by the heater is 450 W.

The heater is used 35% of the time and is off 65% of the time. The percentage of time the heater is used is calculated using the formula:

Percentage of time the heater is used = (Time heater is on/Total time) × 100

Percentage of time the heater is used = (35/100) × 100

Percentage of time the heater is used = 35%

The percentage of time the heater is off is calculated using the formula:

Percentage of time the heater is off = (Time heater is off/Total time) × 100

Percentage of time the heater is off = (65/100) × 100

Percentage of time the heater is off = 65%

Thus, the heater is used for 8.4 hours per day (i.e., 24 hours × 35%) and is off for 15.6 hours per day (i.e., 24 hours × 65%).

The energy consumed per day can be calculated by multiplying the power consumed by the time the heater is on. Energy consumed per day = Power consumed × Time heater is on

Energy consumed per day = 450 W × 8.4 hours

Energy consumed per day = 3780 Wh

Energy consumed per day = 3.78 kWh

The annual cost of electricity can be calculated by multiplying the energy consumed per year by the cost of electricity per kWh.

Annual cost of electricity = Energy consumed per year × Cost of electricity per kWh

Annual cost of electricity = 3.78 kWh × $0.13/kWh

Annual cost of electricity = $0.4914/day

Annual cost of electricity = $179.31/year

Hence, the annual cost of electricity at a billing rate of $0.13 per kWhr for a waterbed heater that uses 450 W of power is $36.51.

Learn more about Power here:

https://brainly.com/question/27442707

#SPJ11

The conclusion that could be drawn about the magnetic fields around the moon is that "the moon no longer has a magnetic field."

Planets like Earth that have a liquid metal outer core produce magnetic fields. It's said that the planet's rotation causes the magnetic field. When the planet spins, the molten metal in the core moves, producing an electric current. As a result of the moving electric current, a magnetic field is formed around the planet.

Moons that do not have a molten metal core cannot produce magnetic fields. The moon's magnetic field is significantly weaker than Earth's magnetic field. The surface of the moon is scorched by the sun's radiation due to the absence of a magnetic field. So, the conclusion that can be drawn about the magnetic fields around the moon is that the moon no longer has a magnetic field.

Learn more about magnetic fields here: https://brainly.com/question/30899235.

#SPJ11

The following are the seven heavenly bodies that the ancient astronomers could observe with the unaided eye: Sun, Moon, Mercury, Venus, Mars, Jupiter, Saturn

Step by step explanation:

Planets are some of the seven heavenly bodies that ancient astronomers could observe with the unaided eye besides the stars. The Greeks knew these seven as planets, which means wandering stars. In their nighttime skies, the planets, unlike the stars, moved. The names of the planets were taken from ancient Roman mythology. The Greeks, for example, identified the planet that could be seen moving back and forth across the sky as Hermes, their messenger god.

Learn more about  astronomers and stars at : https://brainly.com/question/5023195

#SPJ11

The momentum of the car is 9900 kg m/s.

What is momentum?

The momentum of an object is defined as the product of its mass and velocity. In this case, the momentum of the car can be calculated using the following formula:

Momentum = mass x velocity

Here, the mass of the car is 900.0 kg and its velocity is 11.0 m/s. Substituting these values into the formula, we get:

Momentum = 900.0 kg x 11.0 m/s

Momentum = 9900 kg m/s

Therefore, the momentum of the car is 9900 kg m/s.

Note that the units of momentum are kilogram meters per second (kg m/s), which are derived from the units of mass (kg) and velocity (m/s). Momentum is a vector quantity, meaning it has both magnitude and direction, and its direction is the same as the direction of motion of the object.

To know more about momentum visit :-

https://brainly.com/question/1042017

#SPJ1

A 3 hp pump would be used to move water from a lake into a large, pressurized tank.

To solve,

P = F × V,

where P is the power, F is the force, and V is the velocity of the water.

We know the power is 3 hp and the velocity is 1000 gal/10 min, so we can solve for F:

F = P ÷ V = 3 hp ÷ 1000 gal/10 min

= 0.003 hp/gal/min.

Now, if the tank is pressurized to 3 atmospheres, the pressure will increase the force needed to move the water.

So, the equation for pressure is P = F × A, where P is the pressure, F is the force, and A is the area.

We know the pressure is 3 atmospheres and the force is 0.003 hp/gal/min, so we can solve for A:

A = P ÷ F = 3 atmospheres ÷ 0.003 hp/gal/min

= 1000 gal/10 min/3 atmospheres.

Therefore, a 3 hp pump will work for this purpose, even if the tank is pressurized to 3 atmospheres.

Learn more about pressure problems here:

brainly.com/question/15225135

#SPJ11

To answer this question, we need to determine the acceleration of the particle by differentiating its position equation twice with respect to time. After finding the acceleration, we can use the force-mass-acceleration relationship to calculate c.

We have the Mass of particle = m = 5 kg

Position of particle, x = 3 + 5t + ct² - 4t³ m

Force on the particle at t = 3 s, F = -33 N (negative direction of the axis)

Using the given equation, we can differentiate to get the acceleration of the particle with respect to time. Taking the Derivative of x with respect to time, we get the velocity of the particle:

v = dx/dt= 5 + 2ct - 12t² ... (i)

Taking the derivative of v with respect to time, we get the acceleration of the particle:

a = dv/dt= 2c - 24t ... (ii)

Now, we can use the relation F = ma to get c.

Therefore, a=F/m

a=-33/5

5(2c - 24t) = 5a

=> 2c - 24t = -33/5

At t = 3 s,

2c - 72 = -33/5

=> c = [(-33/5) + 72]/2= 32.7 m/s²

Therefore, the value of c is 32.7 m/s².

Learn more about acceleration:

https://brainly.com/question/460763

#SPJ11