The y component of the velocity vector is 10 m/s. Then the v is 12.86 m/s. Now the x component of this velocity is v sin θ.That is , x component is 8 m/s.
What is velocity ?Velocity of an object is the measure of its distance travelled per unit time. Velocity is a vector quantity thus having both magnitude and acceleration. The magnitude is called speed.
For a velocity vector there are three translation components possible for three different axes.
here, x component = v sinθ
y component = v cos θ
Given that v cos θ = 10 m/s
θ = 39
Vy = v cos 39 = 10 m/s
then v = 12.8 m/s
Now, the x component is calculated as:
vx = 12.8 m/s sin 39 = 8 m/s.
Therefore, the x component of velocity here is 8 m/s.
Find more on velocity :
https://brainly.com/question/17127206
#SPJ9
Aluminum metal can be recycled from scrap metal by melting the metal to evaporate impurities. Calculate the amount of heat needed to purify 1.00 mole of Al originally at 298 K by melting it. The melting point of Al is 933K. The molar heat capacity of Al is 24 JI(mol K), and the heat of fusion of Al is 10.7 kJlmol: b_ The equation for the overall process of extracting Al from Al,O3 is shown below: Which requires less energy, recycling existing Al or extracting Al from Al,03? Justify your answer with a calculation_ 2AIzO3 (s) 2 Al (s) 302 (g) AH= 1675 kJ
Energy extraction generally refers to the process of obtaining useful energy from a particular source or converting one form of energy to another. This can include extracting energy from fossil fuels, nuclear reactions, wind, solar power, hydropower, or other sources.
In the context of the given question about aluminum production, "energy extraction" refers specifically to the process of obtaining aluminum metal from its ore, which in this case is Al2O3. This process requires a significant amount of energy, as indicated by the high value of the heat of reaction in the equation given in the question. By contrast, recycling aluminum from scrap metal requires much less energy and is therefore generally considered to be more energy-efficient and environmentally friendly than extracting aluminum from its ore.
To calculate the amount of heat needed to purify 1.00 mole of Al originally at 298 K by melting it, consider two processes:
1. Heating the Al from 298 K to its melting point at 933 K, which requires heat Q1:
Q1 = n * Cp * delta T
= 1.00 mol * 24 J/(mol K) * (933 K - 298 K)
= 20,832 J
2. Melting the Al at its melting point, which requires heat Q2:
Q2 = n * delta H_fus
= 1.00 mol * 10.7 kJ/mol
= 10,700 J
The total heat required to purify 1.00 mole of Al by melting it is the sum of Q1 and Q2:
Q_total = Q1 + Q2
= 20,832 J + 10,700 J
= 31,532 J
Now, to determine whether it is more energy-efficient to recycle existing Al or to extract Al from Al2O3, compare the energy required for each process. The equation for extracting Al from Al2O3 shows that the reaction releases 1675 kJ of energy for every 2 moles of Al produced. Therefore, the energy required to extract 1 mole of Al from Al2O3 is:
energy required = 1675 kJ / 2
= 837.5 kJ
Comparison to the 31,532 J of energy required to melt and purify 1 mole of Al, we see that recycling existing Al requires significantly less energy than extracting Al from Al2O3.
Specifically, the energy required to extract 1 mole of Al from Al2O3 is approximately 219 times greater than the energy required to purify 1 mole of existing Al by melting it.
To know more about Energy Extraction, visit:
https://brainly.com/question/14547281
#SPJ4
a plane wall is 250mm thick and it's wall area is 4.5m^2. if the thermal conductivity is 9.35w/m°c and surface temperature are steady at 150°c and 40°c. calculate the heat flow across the plane wall and the temperature gradient in the flow direction
The temperature gradient in the flow of direction is 294525 W.
What is Temperature gradient?A temperature gradient is the gradual variance in temperature with distance. The slope of the gradient is consistent within a material. A gradient is established anytime two materials at different temperatures are in physical contact with each other.
Q= T/( L/ KA)
Q= ( 1500 − 450) / 0.15 / 9.35v * 4.35)
= 294525 W
Units of measure of temperature gradients are degrees per unit distance, such as °F per inch or °C per meter.
Many temperature gradients exist naturally, while others are created. The largest temperature gradient on Earth is the Earth itself. Q= T/Ka.
Therefore, The temperature gradient in the flow of direction is 294525 W.
To learn more about Temperature gradient, refer to the link:
https://brainly.com/question/13020257
#SPJ9
Question 10 of 10
A car drives to the right. There is a large amount of air resistance, and the
car's engine provides the car's forward motion. Which force on the free-body
diagram below represents the weight of the car?
A. Force C
B. Force B
C. Force D
D. Force A
The free-body diagram that will represent the weight of the car is the one in which the weight of the car points downwards.
What are free-body diagrams?Free-body diagrams are diagrams used in physics and engineering to represent an object and the forces acting on it. They are used to analyze the forces and determine the net force acting on an object, which is then used to determine the object's acceleration and motion.
The free-body diagram of the car will be as follows:
a large amount of air resistance - acts to the leftcar's engine provides the car's forward motion - acts to the rightweight of the car - acts downwardsnormal reaction - acts upwardsLearn more about free-body diagrams at: https://brainly.com/question/17849049
#SPJ1
to double the total energy of a mass-spring system oscillating in simple harmonic motion, the amplitude must increase by a factor of?
To square-root the angular frequency to double the total energy of a mass oscillating at the end of a spring with amplitude A. 2. Amplify the signal by the square root of 2.
What is SHM?Simple harmonic motion is a periodic motion in which the acceleration of each individual particle is proportionate to its displacement and is aimed at the mean position.
This is due to the fact that the total energy of a straightforward harmonic oscillator is inversely proportional to its amplitude. The total energy is quadrupled (i.e., doubled squared) if the amplitude is doubled, which is the factor required to double the total energy.
The amplitude must therefore rise by the square root of 2 to twice the total energy.
Therefore, The amplitude of a mass-spring system oscillating in simple harmonic motion must rise by a factor of $sqrt2$, or around 1.414, to double the total energy of the system.
Learn more about SHM here:
https://brainly.com/question/28230148
#SPJ4
circulation of heat in the oceans and atmosphere is an example of energy movement through _________________.
Circulation of heat in the oceans and atmosphere is an example of energy movement through convection.
What is convection?The movement of heat energy through a fluid is known as convection. This kind of heating is most frequently seen in the kitchen, typically with a liquid that is brought to a boil. The air that makes up the atmosphere behaves like a fluid. The rocks are warmed up as a result of the sun's radiation penetrating the ground.
As a result of conduction, the temperature of the rock will increase, which will cause heat energy to be released into the environment. This will result in the formation of a bubble of air that is warmer than the air around it. This pocket of air climbs into the atmosphere and continues its journey. The heat that was held within the bubble dissipates into the atmosphere as it rises, causing the bubble to gradually become cooler.
To learn more about convection, click here:
https://brainly.com/question/12864792
#SPJ4
what is the velocity of a rock if it falls at a 3m/s
3m/s downward is the velocity of a rock if it falls at a 3m/s. The idea of velocity is crucial in kinematics, the part of physical laws.
What is velocity?The direction speed of an item in motion as an indicator of it's own rate of shift in position as perceived from a certain frame of reference and measured by a specific standard of time (e.g., 60 km/h northbound) is known as velocity.
The idea of velocity is crucial in kinematics, the part of physical laws that explains the motion of things. 3m/s downward is the velocity of a rock if it falls at a 3m/s.
Therefore, 3m/s downward is the velocity of a rock if it falls at a 3m/s.
To learn more about velocity, here:
https://brainly.com/question/80295
#SPJ9
A)How much heat does it take to increase the temperature of 2.10 molmol of an ideal gas by 60.0 KK near room temperature if the gas is held at constant volume and is diatomic?
B)What is the answer to the question in part A if the gas is monatomic?
A) It would take 2079 J of heat to increase the temperature of 2.10 mol of a diatomic gas by 60.0 K at a constant volume.
B) It would take 1244 J of heat to increase the temperature of 2.10 mol of a monatomic gas by 60.0 K at a constant volume.
What is the difference between diatomic and monoatomic?The terms "diatomic" and "monoatomic" describe how many atoms make up a molecule or an ion. Diatomic molecules, like O2 or HCl, are made up of two covalently connected atoms of the same element. On the other hand, monoatomic species are made of a single atom, which could be neutral like helium or argon or charged like cations and anions. Diatomic molecules have unique chemical properties and are frequently involved in chemical processes, whereas monoatomic species normally exist as gases under normal conditions and are relatively inert. In the study of chemistry and physics, the contrast between diatomic and monoatomic particles is significant, particularly in understanding the behavior of various elements and their interactions with other substances.
(A) To calculate the amount of heat required to increase the temperature of 2.10 mol of a diatomic gas by 60.0 K at constant volume, we can use the formula: Q = nCvΔT
where Q is the amount of heat, n is the number of moles of the gas, Cv is the molar heat capacity at constant volume, and ΔT is the change in temperature. For a diatomic gas, Cv = (5/2)R, where R is the gas constant.
So, substituting the given values, we get:
Q = (2.10 mol)(5/2)(8.31 J/mol·K)(60.0 K)
Q = 2079 J
Therefore, it would take 2079 J of heat to increase the temperature of 2.10 mol of a diatomic gas by 60.0 K at a constant volume.
B) For a monatomic gas, Cv = (3/2)R. So, using the same formula as above, we get:
Q = (2.10 mol)(3/2)(8.31 J/mol·K)(60.0 K)
Q = 1244 J
Therefore, it would take 1244 J of heat to increase the temperature of 2.10 mol of a monatomic gas by 60.0 K at a constant volume.
To know more about diatomic and monoatomic, check out:
https://brainly.com/question/16789083
#SPJ4
) To calculate the amount of heat required to increase the temperature of 2.10 mol of a diatomic gas by 60.0 K at constant volume, we can use the formula:
Q = nCvΔT
where Q is the amount of heat, n is the number of moles of the gas, Cv is the molar heat capacity at constant volume, and ΔT is the change in temperature. For a diatomic gas, Cv = (5/2)R, where R is the gas constant.
So, substituting the given values, we get:
Q = (2.10 mol)(5/2)(8.31 J/mol·K)(60.0 K)
Q = 2079 J
Therefore, it would take 2079 J of heat to increase the temperature of 2.10 mol of a diatomic gas by 60.0 K at constant volume.
B) For a monatomic gas, Cv = (3/2)R. So, using the same formula as above, we get:
Q = (2.10 mol)(3/2)(8.31 J/mol·K)(60.0 K)
Q = 1244 J
Therefore, it would take 1244 J of heat to increase the temperature of 2.10 mol of a monatomic gas by 60.0 K at constant volume.
Calculate the work that must be done on charges brought from infinity to charge a spherical shell of radius R = 0.100 m to a total charge Q = 125 μC.
The work that must be done on charges brought from infinity to charge a spherical shell of radius R = 0.100 m to a total charge Q = 125 μC = 1.12 x 10⁶ J
The potential difference of the charge is the amount of work required to bring a unit positive charge from infinity.
V = E x d
= k (q/r)
where;
V = The potential difference (J)
E = The field potential (N/C)
d = The distance that the charge (m)
k = Coulomb constant (8.99 x 10⁹ Nm²/C²)
q = The unit charge
r = radius
Hence,
The work done:
= (8.99 x 10⁹ Nm²/C²) (125 x 10–⁶) / 0.1
= 1.12 x 10⁶ J
Learn more about work done here: https://brainly.com/question/30391011
#SPJ4
Multiple Choice: Suppose the electric field is zero in a certain region of space. Which of the following statements best describes the electric potential in this region?
a) The electric potential is zero everywhere in this region.
b) The electric potential is zero at at least one point in this region.
c) The electric potential is constant everywhere in this region.
d) There is not enough information given to distingush which of the above answers is correct.
Option c) is correct as in a region where electric field is zero, electric potential is constant and independent region location.
The statement that best describes the electric potential in a region of space where the electric field is zero is (c) the electric potential is constant everywhere in this region.
This can be explained by the fact that:
electric potential is amount of work done to get a unit charge from infinity to a particular point in electric field. When electric field is zero, there's zero force acting on charge and therefore work done is zero.
In such a scenario, the electric potential is said to be constant throughout the region because the amount of work required to move as charge one to another point doesn't depend on path. Any path will have no charge and thus potential difference will become zero.
Learn more about electric field here:
https://brainly.com/question/15800304
#SPJ4
Suppose that a right-moving em wave overlaps with a left-moving em wave so that, in a certain region of space, the net electric field in the y direction and magnetic field in the z direction are given by Ey = E0 sin(kx-wt)+E0 sin(kx+wt) and Bz =B0 sin(kx-wt)+B0 sin(kx+wt). (a) Find the mathematical expression that represents the standing electric and magnetic waves in the y and z directions, respectively. (b) Determine the Poynting vector and find the x locations at which it is zero at all times.
The standing wave can be obtained by taking the sum of the two traveling waves with equal amplitude and opposite phase velocities. To do this, we can use the trigonometric identity:
How to use wave amplitude?sin(A) + sin(B) = 2 cos((A+B)/2) sin((A-B)/2)
Applying this identity to the electric field Ey, we get:Ey = 2 E0 cos(wt) sin(kx)
This represents a standing wave with nodes (zero amplitude) at x = nλ/2k, where n is an integer.
Similarly, for the magnetic field Bz, we have:
Bz = 2 B0 cos(wt) sin(kx)
This also represents a standing wave with nodes at the same positions as the electric field.(b) The Poynting vector represents the flow of energy of the electromagnetic wave and is given by:S = E x B
where x represents the vector cross product. Substituting the expressions for E and B, we get:
S = E0 B0 sin^2(kx) / μ0
where μ0 is the permeability of free space.
The Poynting vector is zero when sin^2(kx) = 0, which occurs at x = nπ/k for n an integer. This represents positions where the electric and magnetic fields are out of phase and the energy flow is momentarily zero.
To know more about wave amplitude , check out :
https://brainly.com/question/19036728
#SPJ4
what a geologist sees. a geology student sits beside an outcrop on mont royal, the namesake of montreal. this exposure shows the intrusion of molten basalt into preexisting limestone.
The geologist sees depositional contact. Therefore, option A is correct.
What is depositional contact?A sedimentary or volcanic rock is said to have been deposited on an older rock at a depositional contact (of any type). Where volcanic rocks encroach on older rock, this is known as an intrusive contact (of any type).
The ten different types of contacts are as follows: (1) bedding planes, (2) diastems, (3) angular irregularities, (4) disconformities, (5) para-conformities, (6) nonconformities, (7) pedologic contacts, (8) faults, 9) intrusive contacts, and 10) extrusive contacts.
Hence, option A is correct.
Learn more about depositional contact, here:
https://brainly.com/question/9000638
#SPJ1
your question is incomplete, most probably the full question is this:
what a geologist sees. a geology student sits beside an outcrop on mont royal, the namesake of montreal. this exposure shows the intrusion of molten basalt into preexisting limestone.
A balloon with a volume of 5.3 L is taken from an indoor temperature of 24 degrees Celsius to the outdoors. The volume of the balloon outside is 4.9 L. Determine the Celsius temperature outside.
The temperature outside is 1.6 degrees Celsius
What is the Charles law?Charles's law, also known as the law of volumes, is a fundamental gas law that describes the relationship between the volume and temperature of a gas at a constant pressure.
It states that, for a fixed mass of gas at a constant pressure, the volume of the gas is directly proportional to its absolute temperature.
By the use of the Charlee's law;
V1/T1 = V2/T2
V1T2 = V2T1
T2 = V2T1/V1
T2 = 4.9 * 297/5.3
T2 = 1.6 degrees Celsius
Learn more about Charles law:https://brainly.com/question/16927784
#SPJ1
which of the following changes will result in a larger frequency for an oscillating spring-mass system?
An increase in the spring constant changes will result in a larger frequency for an oscillating spring-mass system.
About mass -spring systemThe mass spring system is a system composed of objects that have mass and are connected to springs. The spring circuit can be composed of several springs mounted in series or parallel as needed. Springs connected in series will decrease the value of the spring constant, while the installation of springs in parallel will increase the value of the spring constant.
Spring system formation is a simple spring system formation arranged in series or parallel. The stages of the research carried out included determining the mathematical equation for mass movement determined from the equilibrium position in the formation of a spring system, including a spring system of a mass connected to two springs arranged in series, a spring system of a mass connected to two springs arranged in parallel and a spring system of two masses. connected by two springs arranged in series, then create a spring system simulation program.
Learn more about spring mass at
https://brainly.com/question/23312582
#SPJ4
Your annoying little brother is dropping rocks out of his bedroom window on the 2nd floor. You are on the ground floor and watch a rock fall past the patio door onto the ground below. In this problem, ignore air resistance.
If the rock takes 0.28 s to cross the 2.1-m-high glass door, from what height above the top of the door was it dropped?
The rock was dropped from a height of approximately 0.862 meters above the top of the glass door.
We can use the kinematic equations of motion to solve this problem. In particular, we can use the equation:
y = vi*t + [tex](1/2)at^2[/tex]
where:
y is the distance the rock falls
vi is the initial velocity of the rock (which is 0, since the rock is dropped from rest)
a is the acceleration due to gravity (which is approximately [tex]-9.81 m/s^2[/tex], since the rock is falling downwards)
t is the time it takes for the rock to fall the distance y.
We know that the rock falls a total distance of 2.1 meters (the height of the glass door), and it takes 0.28 seconds to fall this distance. Therefore, we can plug in these values and solve for the initial height:
2.1 m = 0 + [tex](1/2)( -9.81 m/s^2)(0.28 s)^2[/tex]+ vi*(0.28 s)
Simplifying and solving for vi, we get:
vi = (2.1 m - (1/2)[tex](-9.81 m/s^2)(0.28 s)^2)[/tex] / 0.28 s
vi = 6.14 m/s
So the initial velocity of the rock when it was dropped was 6.14 m/s. Now we can use the kinematic equation:
y = vi*t + [tex](1/2)at^2[/tex]
To solve for the initial height. We know the initial velocity and the time it took for the rock to fall past the glass door (0.28 seconds), so we can plug in these values and solve for y:
y = vit + [tex](1/2)at^2[/tex]
y = (6.14 m/s)(0.28 s) + [tex](1/2)(-9.81 m/s^2)(0.28 s)^2[/tex]
y = 0.862 m
For more such questions on height-
https://brainly.com/question/30695754
#SPJ4
Even when shut down after a period of normal use, a large commercial nuclear reactor transfers thermal energy at the rate of 150 MW by the radioactive decay of fission products. This heat transfer causes a rapid increase in temperature if the cooling system fails (1 watt = 1 joule/second or 1 W = 1 J/s and 1 MW = 1 megawatt).
(a) Calculate the rate of temperature increase in degrees Celsius per second (
∘
C/s) if the mass of the reactor core is 1.60
×
10
5
kg and it has an average specific heat of 0.3349 kJ/kg
∘
⋅
C.
(b) How long would it take to obtain a temperature increase of 2000
∘
C, which could cause some metals holding the radioactive materials to melt? (The initial rate of temperature increase would be greater than that calculated here because the heat transfer is concentrated in a smaller mass. Later, however, the temperature increase would slow down because the 5
×
10
5
-kg steel containment vessel would also begin to heat up.)
(a) The rate of temperature increase is about 1.40 degrees Celsius per second. (b) It would take about 1428.57 seconds or 23.81 minutes to obtain a temperature increase of 2000 degrees Celsius.
(a) The rate of temperature increase can be calculated by first finding the total energy being transferred per second by the decay of fission products, which is 150 MW. This is equivalent to 150 x 10⁶ J/s. Then, we can use the formula:
rate of temperature increase = (energy transferred per second) / (mass x specific heat)
Plugging in the values, we get:
rate of temperature increase = (150 x 10⁶ J/s) / (1.60 x 10⁵ kg x 0.3349 kJ/kg∘C)
rate of temperature increase ≈ 1.40∘C/s
Therefore, the rate of temperature increase is about 1.40 degrees Celsius per second.
(b) To find the time it would take to obtain a temperature increase of 2000 degrees Celsius, we can use the formula:
time = (change in temperature) / (rate of temperature increase)
Plugging in the values, we get:
time = (2000∘C) / (1.40∘C/s)
time ≈ 1428.57 s
Therefore, it would take about 1428.57 seconds or 23.81 minutes to obtain a temperature increase of 2000 degrees Celsius.
Learn more about radioactive decay here: brainly.com/question/1770619
#SPJ4
Complete question:
Even when shut down after a period of normal use, a large commercial nuclear reactor transfers thermal energy at the rate of 150 MW by the radioactive decay of fission products. This heat transfer will cause a rapid increase in temperature if the cooling system fails.
(a) Calculate the rate of temperature increase, in degrees Celsius per second (°C/s), if the mass of the reactor core is 1.4 × 105 kg and it has an average specific heat of 0.3349 kJ/(kg.°C).
(b) How long, in minutes, would it take for the temperature to increase by 2000°C, which could cause some metals holding the radioactive materials to melt? (The initial rate of temperature increase would be greater than that calculated here because the heat transfer is concentrated in a smaller mass. Later, however, the temperature increase would slow down because the 5 x 105-kg steel containment vessel would also begin to heat up.)
can someone please help me 50 points to the person that gets it right
Explanation:
Convert °F to °C. and Convert °C to °F
Allison exerts a steady net force of 54 N on a 24-kg
shopping cart initially at rest for 2.6 s. find the distance.
Answer:
Approximately [tex]7.6\; {\rm m}[/tex] while the force was applied.
Explanation:
Divide net force by mass to find acceleration:
[tex]\begin{aligned}(\text{acceleration}) &= \frac{(\text{net force})}{(\text{mass})} = 2.25\; {\rm m\cdot s^{-2}}\end{aligned}[/tex].
(Note that [tex]1\; {\rm N} = 1\; {\rm kg\cdot m\cdot s^{-2}}[/tex].)
The question states that this acceleration of [tex]a = 2.25\; {\rm m\cdot s^{-2}}[/tex] continued for [tex]t = 2.6\; {\rm s}[/tex]. Additionally, it is given that initial velocity was [tex]u = 0\; {\rm m\cdot s^{-1}}[/tex] (initially at rest.)
Let [tex]x[/tex] denote the distance travelled. Apply the SUVAT equation [tex]x = (1/2)\, a\, t^{2} + u\, t[/tex] to find this distance:
[tex]\begin{aligned}x &= \frac{1}{2}\, a\, t^{2} + u\, t \\ &= \frac{1}{2}\, (2.25)\, (2.6)^{2}\; {\rm m} + (0)\, (2.6)\; {\rm m} \\ &= \frac{1}{2}\, (2.25)\, (2.6)^{2}\; {\rm m} \\ &\approx 7.6\; {\rm m}\end{aligned}[/tex].
A pool ball moving 1.83 m/s
strikes an identical ball at rest.
Afterward, the first ball moves
1.15 m/s at a 23.3° angle. What is
the x-component of the velocity of
the second ball?
Answer:n to the right to the right
Explanation:
An object is launched from the origin with a velocity of 10.0 m/s at an angle of 30.0 degrees above the horizontal. What is the velocity of the object 2.00 seconds later? A. Vx=8.7 m/s, Vy=-14.6 m/s B. Vx - 14.6 m/s, Vy=-5.6 m/s C. Vx = -8.7 m/s, Vy=-14.6 m/s D. Vx-14.6 m/s. Vy - 8.7 m/s E. Vx = 5.6 m/s, Vy=-14.6 m/s
The velocity of the object both horizontally and vertically at 2.00 seconds is (A) 8.7 m/s and - 14.6 m/s. The result is obtained by us using formula for projectile motion.
How to find horizontal and vertical velocity of projectile motion?In horizontal motion, the velocity is not affected by the gravitational acceleration. It can be calculated by
vx = v₀ cos θ
In vertical motion, the velocity is affected by the gravitational acceleration. It ca be expressed as
vy = v₀ sin θ - gt
An object is moving in projectile motion.
we have:
initial velocity, v₀ = 10.0 m/sAngle above the horizontal, θ = 30°Time, t = 2.00 sThe horizontal velocity of the object is
vx = 10.0 × Cos 30°
vx = 10.0 × ½ √3
vx = 5√3
vx = 8.7 m/s
The vertical velocity of the object is
vy = v₀ sin 30 - gt
vy = 10.0 (½) - 9.8 (2.00)
vy = 5 - 19.6
vy = - 14.6 m/s
Hence, the velocity of the object is vx = 87 m/s and vy = - 14. m/s.
The correct option is (A).
Learn more about projectile motion here:
brainly.com/question/30579228
#SPJ4
a) Write a selected signal assignment statement to represent the 4-to-1 MUX shown below. Assume that there is an inherent delay in the MUX that causes the change in output to occur 15 ns after a change in input.
(b) Repeat (a) using a conditional signal assignment statement.
Selected signal assignment statement to represent the 4-to-1 MUX has been shown below.
a)entity mux4to1 is
port(A,B: in std_logic;
CD : in std_logic_vector(1 down to 0),
F: out std_logic);
end mux4to1;
Architecture behavioral of mux4to1 is
begin
with CD select
F<= transport (not A) after 10 ns when "00",
transport B after 10 ns when "01",
transport (not B) after 10 ns when "10",
transport "0" after 10 when "11";
end behavioral;
b)entity mux4to1 is
port(A,B: in std_logic;
CD : in std_logic_vector(1 down to 0),
F: out std_logic);
end mux4to1;
Architecture behavioral of mux4to1 is
begin
F <= inertial (not A) after 10 ns WHEN (CD = “00”) ELSE
inertail B after 10 ns WHEN (sel = “01”) ELSE
inertail (not B) after 10 ns WHEN (sel = “10”) ELSE
inertail "0" after 10 ns WHEN (sel = “11”) ELSE
‘X’;
end behavioral;
c)entity mux4to1 is
port(A,B: in std_logic;
CD : in std_logic_vector(1 down to 0),
F: out std_logic);
end mux4to1;
Learn more about 4-to-1 MUX here brainly.com/question/15052768
#SPJ4
The kinetic energy is 4400 joules. The mass is 29 kg. What is the speed?
Answer:F=6*10\4N
Explanation:the 4 is th sqaer
at a lab investigating fire extinguisher foams, a heavy ball is accidentally dropped into a deep vat of foam from a crane 5.80 m above the foam. after entering the foam, it sinks to the bottom with a constant velocity equal to the velocity with which it hit the foam. the ball reaches the bottom 5.00 s after it is released.How deep is the vat?
The depth pressure of the vat obtained is 44.076 m.
What is the colour code for fire extinguishers?Extinguisher Type hue of the band acceptable for (class of fire) Comments All Red Water Unsafe around other types of fire. BA Foam Blue Unsafe around other types of fire. Class A fires can also be put out with Powder White B, (E), or "AB(E)" type powder. Dioxide of carbon (E) Black, B Watch out for discharge pressure.
Time from the crane to the bottom of the vat (t) = 3.20 s
H = ½gt²
H = ½ × 9.8 × 3.2²
H = 4.9 × 10.24
H = 50.176 m
Height (H) = 50.176 m from crane to vat's bottom
Crane's height above the vat (h) is 6.10 metres
Depth of vat = H – h
Depth of vat = 50.176 – 6.10
Depth of vat = 44.076 m
To know more about depth pressure visit:-
https://brainly.com/question/13199528
#SPJ4
newtons ring experiment for engineering
Newton's ring is a phenomenon of interference pattern of the light rays which is created by reflection of light rays.
What is Newton's ring experiment?Newton's rings is a phenomenon in which an interference pattern of the light is generally created by the reflection of light rays between the two surfaces, typically a spherical surface and an adjacent touching flat surface in space.
Newton's rings, in optics, is a series of concentric light- and dark-colored bands which are observed between any two pieces of glass when one is convex and it rests on its convex side on another piece which is having a flat surface. Thus, a layer of air exists between the two.
Newtons ring experiment is used for the determination of wavelength of monochromatic lights. It is also used for the determination of refractive index of transparent liquid.
Learn more about Newton's ring experiment here:
https://brainly.com/question/16979383
#SPJ9
the silicon sample has been uniformly illuminated with light resulting in an optical generation rate is?
The optical generation rate of a silicon sample illuminated with light is the rate at which photogenerated carriers are created in the sample.
Optical generation rate is typically expressed in units of A/cm2. The optical generation rate is a function of the light intensity, the wavelength of the light, and the material properties of the silicon sample. The rate of generation of electron-hole pairs through photon absorption is known as "optical generation rate". Optical generation rate is usually denoted by G(x) and in unit of electrons/cm³s.
To know more about light intensity please refer:
https://brainly.com/question/30499504
#SPJ4
Part A
Sort each of the astronomical questions below into the appropriate bin based on the type of observation you would need to perform to answer it.
Imaging: How large is the Andromeda Galaxy? What are the major surface features of Mars? Are stars in the Orion Nebula surrounded by gas?
Spectroscopy: What is the chemical composition of the Crab Nebula? What is the temperature of Jupiter's atmosphere? Is the star Vega moving toward us or away from us?
Timing: Does the star Mira vary in brightness? Is the X-ray emission from the galactic center steady or changing?
The nebula is the closest big star-forming zone to Earth but is still 1,500 light-years away, giving it a moderately bright apparent brightness of 4.
What is the Orion Nebula like, in the opinion?The Orion Nebula, sometimes referred to as Mass 42, M42, also NGC 1976, is a diffused nebula below Orion's Belt with a greenish hue. Several of the sharpest nebulae, it may be seen in the sky at night with the unaided eye.
For what is Orion most well-known?One of the clearest and most familiar constellation inside the sky is the one that bears the name of the hunt from Greek mythology. According to the astronomy website Astronomy Trek, Orion contains Betelgeuse (Alpha Orionis) and Rigel (Beta Orionis), 2 of the 10 bright stars in the sky.
To know more about Orion Nebula visit:
https://brainly.com/question/10175402
#SPJ1
a recursive function is a function that: group of answer choices calls itself, directly or indirectly. returns a double. is inside of another function. takes 3 arguments.
A recursive is a function that eventually calls itself.
Base recursive functions are defined as the recursive functions where the last statement performed is the recurrent call.
Recursive function: what is it?
A recursive function is a function which explains that one that generates a series of phrases by repeating or using its own prior term as input. The math sequence, which has presence of some words with a following differences between them, is typically the basis on which we study about this function.
How does a recursive function operate?
The function is defined as something which is repeatedly through recursion within the function. Until and unless we have the base case which is satisfied, the recursive condition makes repeated calls to the function. The base case is contained in the function, and it causes the execution to stop when its condition is met.
To know more about recursive function:
brainly.com/question/23896867
#SPJ4
A physics instructor walks with increasing speed across the front of the room, then suddenly reverses direction and walks backwards with constant speed. Which of the following graphs correctly depicts the acceleration vs. time of the physics instructor?
According to the physics professor's acceleration vs. time graph, a change in speed could also mean a change in velocity.
What is acceleration, using an example?An object's velocity may alter depending on whether it is moving faster, slower, or in a different direction. The moon orbiting the earth and an apple falling to the ground are two instances of acceleration.
What exactly are velocity and acceleration?The pace at which displacement changes is known as velocity. The rate at which velocity changes is known as acceleration. Because it includes both magnitude and direction, mass and velocity quantity. Since acceleration is merely the rate at which velocity changes, acceleration is likewise a vector quantity.
To know more about Acceleration visit:
https://brainly.com/question/30660316
#SPJ1
The type of ion channel that will open and close depending on changes in electrical potential across the membrane is referred to as _________________. Those ion channels that require a chemical messenger to bind to them in order to open or close are called____________________. voltage-gated; mechanically-gated ligand-gated; stretch-gated voltage-gated; ligand-gated ligand-gated; voltage-gated stretch-gated; ligand-gated
The type of ion channel that will open and close depending on changes in electrical potential across the membrane is referred to as voltage-gated. In this case the word “voltage” is already telling you that it functions with electrical potential
Those ion channels that require a chemical messenger to bind to them in order to open or close are called ligand-gated. The word “ligand” tells you that there is a compound (chemical messenger) that is ligand of a receptor, once it binds with the receptor, the channels will be active.
To know more about Ion Channel, visit: brainly.com/question/29415412
#SPJ4
The motion of the kangaroo is under free-fall. We are looking for the initial velocity, and we know that the velocity in the highest position is zero.
From
v
2
=
(
v
0
)
2
+
2
ay
,
v 2
=(v 0
) 2
+2ay,
we have
v
2
=
(
v
0
)
2
+
2
ay
v
2
−
2
ay
=
(
v
0
)
2
v
0
=
v
2
−
2
ay
v 2
v 2
−2ay
v 0
=(v 0
) 2
+2ay
=(v 0
) 2
= v 2
−2ay
Substituting the known values,
v
0
=
v
2
−
2
ay
v
0
=
0
2
−
2
(
−
9.81
m/s
2
)
(
2.50
m
)
v
0
=
7.00
m/s
v 0
v 0
v 0
= v 2
−2ay
= 0 2
−2(−9.81m/s 2
)(2.50m)
=7.00 m/s
Therefore, the vertical speed of the kangaroo when it leaves the ground is 7.00 m/s.
Part B
Since the motion of the kangaroo has uniform acceleration, we can use the formula
y
=
v
�
t
+
1
2
a
t
2
y=v o
t+ 2
1
at 2
The initial and final position of the kangaroo will be the same, so �
y is equal to zero. The initial velocity is 7.00 m/s, and the acceleration is -9.81 m/s2.
y
=
v
0
t
+
1
2
a
t
2
0
=
(
7.00
m/s
)
t
+
1
2
(
−
9.81
m/s
2
)
t
2
0
=
7
t
−
4.905
t
2
7
t
−
4.905
t
2
=
0
t
(
7
−
4.905
t
)
=
0
t
=
0
or
7
−
4.905
t
=
0
y
0
0
7t−4.905t 2
t(7−4.905t)
t=0
=v 0
t+ 2
1
at 2
=(7.00 m/s)t+ 2
1
(−9.81 m/s 2
)t 2
=7t−4.905t 2
=0
=0
or7−4.905t=0
Discard the time 0 since this refers to the beginning of motion. Therefore, we have
7
−
4.905
t
=
0
4.905
t
=
7
t
=
7
4.905
t
=
1.43
s
7−4.905t
4.905t
t
t
=0
=7
= 4.905
7
=1.43 s
The kangaroo is about 1.43 seconds long in the air.
The motion of the kangaroo is under free-fall, its vertical speed when it leaves the ground 7.00m/s and it is in air for 1.43s.
The stir of the kangaroo is under free- fall. We're looking for the original haste, and we know that the haste in the loftiest position is zero.
From,
v ² = ( vo) ² 2ay,
we have,
v ² = ( vo) ² 2ay,
v ²- 2ay = vo ²
vo = √ v ²- 2ay
Vo = 7.00 m/ s
thus, the perpendicular speed of the kangaroo when it leaves the ground is 7.00 m/s.
Since the stir of the kangaroo has invariant acceleration, we can use the formula,
y = vo * t1/2 at ²
7t-4.905 t ²
t = 0 or t = 1.43
thus, kangaroo is about 1.43 seconds long in the air.
Learn more about Vertical speed question:
https://brainly.com/question/30462853
#SPJ4
Complete question:
A kangaroo can jump over an object 2.50 m high. (a) Calculate its vertical speed when it leaves the ground. (b) How long is it in the air?
. How much work does it take to accelerate an 8.0-kg bowling ball from rest to a speed of 12 m/s!
a. If the average force on the bowling is 230 N, what is the distance through which it must
be accelerated to reach a speed of 12 m/s?
The work done on the bowling ball is 576 J to accelerate an 8.0-kg bowling ball from rest to a speed of 12 m/s and a distance of 2.5 m to reach a speed of 12 m/s if the average force on the bowling ball is 230 N.
What is the calculation of the work done?Work = 1/2 × m × [tex]v^2[/tex]
( m =8 kg=is the mass, v= 12 m/s= is final velocity)
Work = 1/2 × 8.0 kg × [tex](12 m/s)^2[/tex] = 576 J
As per work-energy principle, the work done on an object = the change in its kinetic energy
Work = ΔKE
(ΔKE = change in kinetic energy, initial kinetic energy=0)
final kinetic energy is,
KE = 1/2 × m × [tex]v^2[/tex] = 1/2 × 8.0 kg × [tex](12 m/s)^2[/tex] = 576 J
the change in kinetic energy,
ΔKE = KE - 0 = 576 J (work is equal to force here)
So, Work = Force × Distance
Distance = Work / Force = 576 J / 230 N = 2.5 m
As a result, the work done on the bowling ball is 576 J to accelerate and travel 2.5 m with an 8.0-kg bowling ball.
Learn more about the calculation of the work done here.
https://brainly.com/question/16976412
#SPJ1