A wave pulse travels along the horizontal string. As the pulse enacts a point on the string. The point moves vertically up and then back down again. The speeds could not be uniquely corresponded, because there is no fixed relationship between them.
A simple type of wave called a pulse is produced. The pulse pushes down the string and so everyplace the pulse goes that part of the string attains kinetic and elastic energy. In general, a wave is characterized as a disruption in a medium that transports both energy and momentum. Wave interference is the consequence of the interactions of multiple waves. Wave interference usually provokes wave beats. A wave pulse is a quick, non periodic, wave created by a single input of energy instead than a continuous or recounted input of energy.
To learn more about wave pulse visit here:
https://brainly.com/question/14885673
#SPJ4
why are equipotential lines perpendicular to electric field
Equipotential lines, which link locations in space that have the same electric potential, are always parallel to the lines of the electric fields.
A set of fictitious lines known as equipotential lines connects locations in space that share the same electric potential. The electric potential at a point is an indicator of the amount of electric potential energy per unit charge needed to transfer a charge from infinity to that location.
Since the electric potential in an electric field decreases in the direction of the electric field, the equipotential lines are parallel to the lines of the electric field. This is so because the direction of the electric field corresponds to the direction in which a positive test charge would go, whereas the direction of the equipotential lines corresponds to the direction in which a charge can move without exerting any effort.
If the electric field lines and equipotential lines were parallel, then the potential.
Learn more about electric fields here:
https://brainly.com/question/15800304
#SPJ4
In the metric system, each millimeter increment is equal to _____.answer choices1/1000 of a centimeter1/100 of a centimeter1/10 of a centimeter10 centimeters
In the metric system, each millimeter increment is equal to 1/10th of a centimeter.
What is the metric system, and importance of millimeter?The metric system is a system of units used to measure length, mass, time, and other physical quantities. The base unit of length in the metric system is the meter, and smaller units of length, such as the millimeter, are defined as fractions of the meter.
One millimeter is equal to 1/10 of a centimeter, which is equal to 0.1 cm. This relationship is based on the fact that there are 10 millimeters in one centimeter. In other words, 1 millimeter is one-tenth of a centimeter.
To know more about metric system, visit:
brainly.com/question/1837503
#SPJ4
Select all that applySelect all the characteristics that the Renaissance motet and mass have in common.A. They have five parts, including the Kyrie.B. They are both sacred music.C. They use polyphony.D. They are performed by a chorus.
The characteristics that the Renaissance motet and mass have in common are:
B: They are both sacred music
C: They use polyphony
D: They are performed by a chorus
The Renaissance motet and mass are two important musical genres of the Renaissance period. Both are sacred music that use polyphony and are typically performed by a chorus. The motet is a polyphonic choral work that is usually short and sets a Latin text, often taken from the Bible or liturgy. The mass, on the other hand, is a longer work that sets the texts of the Catholic Mass Ordinary, including the Kyrie, Gloria, Credo, Sanctus, and Agnus Dei. Both genres demonstrate the elaborate contrapuntal writing, complex harmonies, and careful attention to text setting that are hallmarks of Renaissance music.
However, the statement "They have five parts, including the Kyrie" is not correct. The Renaissance motet and mass do not necessarily have five parts, and the Kyrie is not always included in motets.
You can learn more about Renaissance motet at
https://brainly.com/question/8859578
#SPJ4
Two children have identical spring-loaded catapults, which contain springs with spring constant k. If Samir compresses the spring in his catapult by a distance x and Mona compresses hers by a distance 2x, hovw does the work they have done to compress their catapults compare?
The work done by Samir and Mona to compress their catapults is (1/2) kx^2 joules and kx^2 joules respectively. hence, the work done by Mona is twice the work done by Samir.
The work done by Samir and Mona to compress their catapults is proportional to the amount of energy stored in the springs. The energy stored in the spring is given by the formula:
E = (1/2) kx^2
where E is the energy stored in the spring, k is the spring constant, and x is the distance the spring is compressed.
Therefore, the work done by Samir to compress his spring by a distance x is:
W1 = (1/2) kx^2
And the work done by Mona to compress her spring by a distance 2x is:
W2 = (1/2) k(2x)^2 = 2(1/2) kx^2 = kx^2
So, the work done by Mona is twice the work done by Samir. Mona has compressed her spring by twice the distance that Samir has compressed his spring, so she has stored twice the amount of energy in her spring. This means that she has done twice the amount of work as Samir to compress her spring.
Learn more about spring constant:
https://brainly.com/question/12278394
#SPJ4
Copernicus said that t he rotation of the Earth on its axis caused the A. daily motions in the heavens. B. phases of the Moon. C. retrograde motion of the planets D. eclipses of the Moon. E. motion of the Sun along the ecliptic
Copernicus said that t he rotation of the Earth on its axis caused the daily motions in the heavens.
Copernicus proposed the heliocentric model of the solar system, which was a significant shift from the previously accepted geocentric model. He suggested that the sun was at the center of the solar system, and the planets, including Earth, revolved around it.
Copernicus also recognized that the Earth rotated on its axis, which explained the apparent daily motion of the stars in the sky. This was a fundamental insight that contributed to our understanding of the universe and paved the way for further discoveries in astronomy.
To know more about the solar system, here
brainly.com/question/12075871
#SPJ4
How many ml means 1 oz?
Answer= 1 oz 29.6ml !!!!!!
true or false statement, phonemic encoding is emphasizing the sound of a word.
An emphasis on a word's sound is called phonemic encoding. By highlighting a word's physical structure, such as its length or printing, semantic encoding conveys meaning.
Where do phonemic and phonetic differ?Phonemic transcriptions depict how people hear certain sounds, whereas phonetic transcriptions give additional information about how the sounds are actually pronounced. To encapsulate phones or sounds and phonemes, we use square brackets, while slashes are used for both.
What is phonological sound?A speaking sound is known as a phoneme. One word can be distinguished from another by its smallest possible sound unit. Since sounds cannot be expressed in writing, we employ letters to stand in for or symbolize the sounds. An individual sound is represented by a grapheme, which might be a single letter or a group of letters.
To know more about Phonemic visit:
https://brainly.com/question/13126345
#SPJ4
what is the definition central powers?
The Central Powers were a coalition of countries that fought against the Allied Powers in World War I.
The Central Powers consisted primarily of Germany, Austria-Hungary, the Ottoman Empire, and Bulgaria, although other countries also provided support at different times during the war.
The Central Powers were an alliance of nations during World War I, which included Germany, Austria-Hungary, the Ottoman Empire, and Bulgaria. The term "Central Powers" was first used in 1915 after Italy left the Triple Alliance and joined the Allies. The Central Powers formed in response to the Triple Entente, which consisted of France, Russia, and Britain.
The alliance was driven by a shared desire to maintain their own territorial and economic interests, as well as to counterbalance the growing military power of the Triple Entente. During the war, the Central Powers fought against the Allies in several theaters of war, including the Western Front, Eastern Front, and the Balkans. The alliance ultimately collapsed in 1918 after suffering several defeats and internal political pressures.
To learn more about Central Powers visit here:
brainly.com/question/14459346
#SPJ4
One long wire carries a current of 20 a along the entire x axis. A second long wire carries a current of 25 a perpendicular to the xy plane and passes through the point (0, 4, 0) m. What is the magnitude of the resulting magnetic field at the point y = 2. 0 m on the y axis?.
2.5*10⁻⁶ T is the magnitude of the resulting magnetic field at the point y = 2. 0 m on the y axis
Define magnetic field.
The magnetic influence on moving electric charges, electric currents, and magnetic materials is described by a magnetic field, which is a vector field. A force perpendicular to the charge's own velocity and the magnetic field acts on it when the charge is travelling through a magnetic field.
If you try to align the like poles of two magnets, you will quickly realize that the most fundamental law of magnetism states that similar poles repel one another and unlike poles attract one another.
B=μ0I/2πR
For x axis, magnetic field:
B1 = 2*10⁻⁷ *20 /2
B1 = 2*10⁻⁶
For magnetic field due to long wire perpendicular to xy plane:
B2 = 2* 10⁻⁷ * 25 /2
B2 = 2.5* 10⁻⁶
As both magnetic fields are said to be perpendicular to each other, net magnetic field is given by
B = √(B1² +B2²)
B = 2.5*10⁻⁶ T
To learn more about magnetic field use link below:
https://brainly.com/question/14411049
#SPJ4
if the electric flux through a closed surface is zero, is the electric field at points on that surface must be zero?
If the electric flux through a closed surface is zero, it means that the net electric flux entering the surface is equal to the net electric flux leaving the surface. It may or may not be zero. The statement is false.
This can occur if there are equal amounts of electric field lines entering and leaving the surface, or if the electric field is normal (perpendicular) to the surface at all points.
However, it is possible for the electric field to be non-zero at some points on the surface as long as the contributions of the electric field at those points are balanced by other areas of the surface where the field is in the opposite direction.
To know more about the electric flux, here
brainly.com/question/14544020
#SPJ4
why biologists often use the term energy source as a synonym for electron donor.
Biologists often use the term "energy source" as a synonym for "electron donor" because the transfer of electrons is a key component of energy generation in many biological systems.
In biological systems, energy is typically generated through a series of chemical reactions called cellular respiration. In this process, electrons are transferred between molecules, releasing energy that is used to power cellular processes. The molecule that donates electrons is known as the electron donor, and the molecule that accepts the electrons is known as the electron acceptor.
Since the transfer of electrons is the primary mechanism by which energy is generated in these systems, biologists often use the term "energy source" to refer to the electron donor. For example, in photosynthesis, the energy source is the electron donor (usually water), which donates electrons to the photosynthetic electron transport chain, generating energy that is used to create ATP and reduce carbon dioxide to produce organic molecules.
To know more about energy source here
https://brainly.com/question/10841575
#SPJ4
Question 4 of 32
Which vector goes from (5, 5) to (4,0)?
OA. a
B. d
C. c
D. b
The vector a, the correct answer is point D.
What is a vector?In physics, a vector is a quantity that has both magnitude and direction. It is typically represented by an arrow with the same direction as the quantity and a length proportional to the magnitude of the quantity.
We need to make the subtraction from the x, and y points. It will be the points of the head minus the points of the tail.
x=(5, 5) and y = (4,0)
Vector = ( 5 - 4, 5 - 0 )
Vector = ( 1, 0 )
Vector = R = î + 5ĵ
The vector will go to the point ( 1 , 0 ). The correct answer is point D on vector a.
The missing image is attached with the answer below.
To know more about vectors follow
https://brainly.com/question/29468146
#SPJ1
Find the area of the surface generated when the given curve revolved about the x-axis.y=8√xon [9,20]
The area of the surface generated is approximately 1180.89 square units.
To find the area of the surface generated when the curve y = 8√x is revolved about the x-axis, we can use the formula:
[tex]A = 2\pi \int_a^b y ds[/tex]
where a and b are the limits of integration, y is the function to be revolved, and ds is an element of arc length.
To find ds, we can use the formula:
[tex]ds = \sqrt{1 + {(\dfrac{dy}{dx}})^2} dx[/tex]
where dy/dx is the derivative of y with respect to x.
In this case, we have y = 8√x,
So dy/dx = 4/√x.
Therefore, [tex]ds = \sqrt{1 + \dfrac{4}{\sqrt{x}}^2} dx[/tex]
[tex]= \dfrac{4}{\sqrt x} \times \sqrt{x+4}\ dx[/tex]
Substituting this into the formula for the surface area, we get:
[tex]A = 2\pi \int_9^{20} y \times 4/√x \times \sqrt{x+4} dx\\= 8\pi \int_9^{20} \sqrt x \times \sqrt{x+4}\ dx\\= 8\pi \int_9^{20} (x+4) dx\\= 8\pi [\dfrac{1}{2}\times (20^2+420) - \dfrac{1}{2}\times (9^2+49)][/tex]
= 1180.89
Therefore, the area of the surface generated is approximately 1180.89 square units.
To know more about the area, here
brainly.com/question/28382150
#SPJ4
comets tend to be ________ than asteroids, and it is estimated that there are far ___________ large comets than large asteroids.
There are reportedly far more massive comets than large asteroids, and comets are often quicker than asteroids.
How do comets work?Comets are understood to be ice things made up of frozen gases, minerals, and dust that were left over after the solar system's origin some 4.6 billion years earlier. They travel in extremely elliptical orbits around the sun, some of which can takes hundreds of millions of years too complete.
Do comets pose a threat to Earth?Globally, feral cats are to blame for the extinction of thousands of animals and small mammals. They have also played a role in the eradication of several island-based species and habitats. There are estimates that between 100 and 350 million birds are killed annually in Canada by outdoor cats.
To know more about comets visit:
https://brainly.com/question/24662890
#SPJ4
calculate the height of the mercury in the tube above the surface in the trough. (Take air pressure = 1.0*1.0^5 pa & density of mercury = 136000 kg/m^3)
Answer:
Explanation:
To calculate the height of the mercury in the tube above the surface in the trough, we can use the following formula:
h = (P - P<sub>0</sub>) / ρg
where h is the height of the mercury column, P is the pressure at the bottom of the tube, P<sub>0</sub> is the atmospheric pressure, ρ is the density of the mercury, and g is the acceleration due to gravity.
Since the pressure at the bottom of the tube is due to the weight of the mercury column above it, we can also express P as P = ρgh, where h is the height of the mercury column in the tube.
Substituting this expression for P into the formula above, we get:
h = (ρgh - P<sub>0</sub>) / ρg
Simplifying this expression, we get:
h = h - P<sub>0</sub> / g
Solving for h, we get:
h = P<sub>0</sub> / ρg
Substituting the given values, we get:
h = (1.0 x 10<sup>5</sup> Pa) / (136000 kg/m<sup>3</sup> x 9.81 m/s<sup>2</sup>)
h = 0.073 m
Therefore, the height of the mercury in the tube above the surface in the trough is approximately 0.073 meters.
Interference pattern? An electron beam is aimed at two closely spaced slits. The beam is attenuated to produce only one electron per minute.
Aiming for two closely spaced slits, an electron beam is used. Only one electron per minute is produced by the beam due to attenuation. There is a pattern. Two close objects are the target of an
How does electron beam machining work?
In the process of electron-beam machining, high-velocity electrons are gathered into a focused narrow beam with a very great planar power density. The work piece is then the focus of the beam cross-section, which generates heat and causes the material to vaporize. Numerous metals can be properly cut or drilled using electron-beam machining.
Who electron beam is welding for?
The most seasoned expert in electron beam welding in Europe is EBP. We have developed our "Design for Manufacture" service and machining skills as more and more of our clients have requested that we supply the gear for their products. This is especially true for tough, elevated metals, which many machinists would not work with.
To know more about electron beam visit:
https://brainly.com/question/14288868
#SPJ4
Compare using >,<,>,<,is greater than, comma, is less than, comma or ==equals. 777 kilograms 60{,}00060,00060, comma, 000 gram
Using >,<,>,<,is greater than, comma, is less than, comma or ==equals, the answer is 777700 kilograms < 60,000,000 grams (is less than).
What is are the use of mathematical signs?Mathematical signs are used to represent mathematical operations and to show relationships between mathematical expressions. Some common mathematical signs include:
Addition (+)Subtraction (-)Multiplication (x or *)Division (÷ or /)Equal to (=)Less than (<)Greater than (>)Less than or equal to (<=)Greater than or equal to (>=)Approximately equal to (~)These signs allow us to perform arithmetic operations, compare numbers, and express mathematical relationships in a clear and concise way.
Learn more on mathematical signs here:https://brainly.com/question/25421984
#SPJ1
The correct question is:
Compare using >,<,>,<,is greater than, comma, is less than, comma or ==equals. 777 kilograms 60,000,000 gram
what is ft/min to m/s conversion?
Feet per minute (ft/min) and meters per second (m/s) are units of speed or velocity, with the former being more commonly used in some industries such as HVAC (heating, ventilation, and air conditioning).
To convert from ft/min to m/s, you can use the following conversion factor:
1 ft/min = 0.00508 m/s
Velocity is a measure of the rate at which an object changes its position with respect to time. It is a vector quantity, which means it has both magnitude and direction. Velocity is different from speed because speed only takes into account the magnitude of the change in position, while velocity also considers the direction of the change.
In physics, velocity is denoted by the symbol ‘v’ and is measured in meters per second (m/s) or other units such as miles per hour (mph), feet per second (ft/s), or kilometers per hour (km/h). It is calculated by dividing the displacement (change in position) of an object by the time taken for that displacement to occur.
To learn more about Velocity visit here:
brainly.com/question/30265720
#SPJ4
Question 1
What is power, and what is its relationship to voltage and amperage?
Power may be characterized as the total amount of energy that is transferred or converted per unit of time. The SI Unit of power is Watt.
How power is related to voltage?Power is the product of voltage and current. With an electronic circuit, the amperage is the amount of electric charge that flows through the wire, while the voltage is the amount of electric potential within a circuit.
By multiplying the voltage times the ampere, you can see how much energy can flow through the circuit. The energy, or power, is measured in watts.
Power in Watts is calculated by multiplying voltage in Volts times current in Amps: 10 Amps of current at 240 Volts generates 2,400 Watts of power. This means that the same current can deliver twice as much power if the voltage is doubled.
To learn more about Power and Voltage, refer to the link:
https://brainly.com/question/24858512
#SPJ9
Magnets are a mystery to scientists because scientists.
Magnetism is a mysterious force in this universe. Scientists don't fully understand why it occurs in the first place. They aren't sure why these particles have a north and south direction either, according to Live Science, and there are many different forms of magnetism.
What are magnets ?Anything that creates a magnetic field is considered to be a magnet. The most notable characteristic of a magnet is a force that pulls on other ferromagnetic materials, such as iron, steel, nickel, cobalt, etc., and attracts or repels other magnets. This invisible magnetic field is responsible for this property.
A substance or object that generates a magnetic field that has the potential to impact objects nearby. Magnetic materials, such as iron, are drawn to a magnet. A magnetic field is always present in permanent magnets. One of a magnet's two poles is its centre of the magnetic field.
Learn more about Magnets here:
https://brainly.com/question/14997726
#SPJ4
state the equation of continuity.
Answer:
ρ A v = constant.
The equation proves the law of conservation of mass in fluid dynamics. Also, if the fluid is incompressible, the density will remain constant for steady flow. So, ρ1 =ρ2.
Impulse problem. The PC has plotted the force applied by the force transducer to the car. In principle, the proper way to use this information is to integrate the transducer signal to obtain F dt. This could be done numerically by the computer but would be of little educational value. Instead, we use an approximate technique often used in practice. Assume the signal looks like the one in Figure 5.4. Then the impulse can be approximated by LaTeX: \int∫ Fdt=Fmax LaTeX: \DeltaΔt, where Fmax is the maximum force and LaTeX: \DeltaΔ t is the Full Width Half Maximum (FWHM) of the signal. Theoretically, LaTeX: \int∫ F dt = LaTeX: \DeltaΔ p. Use the above graph to compute the impulse in kgm/s. Please express your answers with 1 decimal place. _______________________________kgm/s
When the maximal force and Full Width Half Maximum (FWHM) of the signal are combined, impulse would be roughly: if Fmax is 1000 N, and t is 0.1 s.
the result is in newton-seconds (Ns) or kilogrammes per second (kg/s), and is used to approximate the impulse.
I am unable to give a precise response without access to Figure 5.4. However, depending on the data given, the impulse can be roughly described as:
Fmax x t Impulse
where t is the Full Width Half Maximum (FWHM) of the signal and Fmax is the maximum force.
You must convert the force units to newtons and the time units to seconds before multiplying the two values to obtain the impulse in kilogrammes per second (kgm/s). The outcome will be expressed in newton-seconds (Ns) or kgm/s.
For instance, the impulse would be roughly: if Fmax is 1000 N, and t is 0.1 s.
1000 N x 0.1 s of an impulse equals 100 Ns or 100 kgm/s (to 1 decimal place).
Learn more about maximal force here:
https://brainly.com/question/11826042
#SPJ4
What is energy efficiency in dishwater?
Dishwashers' efficiency to use energy more effectively can lead to decreased energy bills and a lessening of their negative effects on the environment.
Dishwasher energy efficiency is normally assessed using a standardized rating system that takes into account a number of variables, such as the quantity of water used, the energy needed to heat the water, and the amount of energy consumed by the dishwasher's engine and other parts.
More energy-efficient dishwashers are often made to use less electricity and water, which may save a lot of money over time.
Moreover, some energy-saving dishwashers could include extra features like dirt sensors and delayed start choices that can improve their efficiency while using less electricity.
Learn more about efficiency at
https://brainly.com/question/28939461
#SPJ4
A large truck of mass 4m is traveling at a speed of v when it collides with a small car of mass m that is at rest. The truck and car stick together after the collision.
The correct option is D, The truck and car stick together after the collision. During the collision the car and truck exert forces on each other. The forces the truck and car exert on each other must be internal to the truck-car system because the momentum of the center of mass of the truck-car system stays the same.
The center of mass is a point that represents the average location of the mass of an object or system. It is the point at which an object can be balanced and remains at rest, even when subjected to external forces. The center of mass is an important concept in physics as it helps to describe the motion of a system, and also to understand the dynamics of collisions and other interactions between objects.
The position of the center of mass depends on the distribution of mass within the object or system. In a simple case, such as a uniform solid object, the center of mass will be at the geometric center of the object. However, in more complex cases, such as a non-uniform object or a system of multiple objects, the center of mass may be located at a different point.
To learn more about Center of mass visit here:
brainly.com/question/28996108
#SPJ4
Complete Question: -
A large truck of mass 4M is traveling at a speed of V when it collides with a small car of mass M that is at rest. The truck and car stick together after the collision. During the collision, the car and truck exert forces on each other. Which of the following is a correct statement about these forces and gives evidence to support this statement?
A. The forces the truck and car exert on each other must be external to the truck-car system because the momentum of the truck changes.
B. The forces the truck and car exert on each other must be external to the truck-car system because the momentum of the car changes.
С. The forces the truck and car exert on each other must be external to the truck-car system because the momentum of both the truck and car change.
D. The forces the truck and car exert on each other must be internal to the truck-car system because the momentum of the center of mass of the truck-car system stays the same.
E. The forces the truck and car exert on each other must be internal to the truck-car system because the momentum of the center of mass of the truck-car system changes.
What are the units of standard deviation?
Standard deviation is measured in the same units as the data being measured.
Standard deviation measures the spread of data around its mean. It is a statistical measure that is used to describe the variability of a set of data. The units of standard deviation are the same as the units of the data being measured.
For example, if the data is measured in inches, the standard deviation will also be in inches. Similarly, if the data is measured in pounds, the standard deviation will also be in pounds. Standard deviation is an important tool in statistical analysis, as it helps to understand how much the data deviates from the mean value.
To know more about the standard deviation, here
brainly.com/question/23907081
#SPJ4
In Exercises 27 evaluate the expression. Write your answer in scientific
notation and in standard form.
27. (4.3 x 10-4) (6 x 107)
Taking into account the scientific notation, the result of the multiplication (4.3 ×10⁻⁴) (6 ×10⁷) is 2.58×10⁴ or 25800.
Scientific notationScientific notation is a quick way to represent a number using powers of base ten.
The numbers are written as a product:
a×10ⁿ
where:
a is a real number greater than or equal to 1 and less than 10, to which a decimal point is added after the first digit if it is a non-integer number.n is an integer, which is called an exponent or an order of magnitude. Represents the number of times the comma is shifted. It is always an integer, positive if it is shifted to the left, negative if it is shifted to the right.Multiplication in scientific notation
To multiply numbers in scientific notation, first multiply the numbers that are not powers of 10, then multiply the powers of ten by adding the exponents. A new number will be produced by a different power of 10.
In this case:
(4.3 ×10⁻⁴) (6 ×10⁷)= (4.3×6)×10⁻⁴⁺⁷= 25.8×10³= 2.58×10⁴= 25800
Finally, the result of the multiplication is 2.58×10⁴ or 25800.
Learn more about scientific notation:
brainly.com/question/8821231
#SPJ1
What is the acceleration of gravity on Mercury?
The acceleration of gravity on Mercury is approximately 3.7 meters per second squared (m/s^2). This value is determined by the mass of Mercury and the distance between its center of mass and the surface of the planet. Because Mercury is smaller and less massive than Earth, the force of gravity on its surface is weaker, leading to a lower acceleration of gravity.
If a 1,000-kg car was moving at 30 m/s, what would be its kinetic energy expressed in the unusual (for kinetic energy) units of calories? (1 cal = 4. 186 j).
Kinetic energy expressed in the unusual is 1.1 × 10⁵ cal.
Kinetic Energy of a body: This is the energy of a body i motion. It is measured in Joules.
It can be expressed mathematically as
Ke = 1/2mv²................................... equation 1
Where ke = kinetic energy, m = mass in kg, v = velocity in m/s.
Where m = 1000 kg, v = 30m/s.
Substiting these values into equation 1,
Ke = 1/2(1000)(30)²
Ke = 500 × 900 = 450000 J
If 1 cal = 4.186 J
4.186 J = 1 cal
450000 J = (450000 × 1)/4.186 cal
= 107501.2 cal. = 1.075 × 10⁵ cal
The Kinetic Energy is ≈ 1.1 × 10⁵ cal.
Hence 1.1 × 10⁵ cal is a correct answer.
To know more about similar question follow link
https://brainly.com/question/17439039
#SPJ4
The rotational inertia of a pencil is greatest about an axis
a)about its end, like a pendulum.
b)about its midpoint, like a propeller.
c)along its length, where the lead is.
The rotational inertia of a pencil is greatest about an axis about its midpoint, like a propeller, option B.
What is a rotational inertia?""Rotational inertia," also known as "moment of inertia." Rotational inertia is a measure of an object's resistance to changes in its rotational motion, and is defined as the sum of the products of the masses of each particle composing an object and the square of their distances from a chosen axis of rotation.
The larger an object's rotational inertia, the harder it is to get it rotating, or to change its rotational speed.
Learn more on rotational inertia here: https://brainly.com/question/14001220
#SPJ1
The disk in a computer drive spins up from rest to a final angular speed of 4900 rpm in 2. 20 s. What is the angular acceleration of the disk?.
First, we need to convert the final angular speed of the disk from revolutions per minute (rpm) to radians per second. We can do this by multiplying the final angular speed by 2π/60.
How to calculate angular speed ?f = 4900 rpm divided by 2/60 equals 514.87 rad/s
Next, we may apply the equation shown below to determine the disk's angular acceleration:ωf = ωi + αt
where t is the time it takes for the disc to achieve its final angular speed, is the disk's angular acceleration, and I is the starting angular speed of the disc, which is 0 because it starts at rest.Inputting the values provided yields:514.87 rad/s = 0 + α × 2.20 s
By solving for, we obtain:
234.03 rad/s2 = 514.87 rad/s / 2.20 s
As a result, the disk's angular acceleration is roughly 234.03 rad/s2.
To know more about angular acceleration , check out :
https://brainly.com/question/21278452
#SPJ4