A wooden barrel full of water has a flat circular top of radius 25.0 cm with a small hole in it. A tube of height 8.00 m and inner radius 0.582 cm is suspended above the barrel with its lower end inserted snugly in the hole. Water is poured into the upper end of the tube until it is full. The density of water is 1.00 × 103 kg/m3.
What is the force with which the water in the barrel pushes up on the top of the barrel?

The internal energy after heating in terms of U is 100U.

The given parameters;

Assuming a constant pressure, the internal energy of the ideal gas is equal to the change in the enthalpy of the ideal gas.

[tex]\Delta H = U \times \Delta T\\\\\Delta H = U (200 - 100)\\\\\Delta H = 100 U[/tex]

Thus, we can conclude that the internal energy after heating in terms of U is 100U.

Learn more here:https://brainly.com/question/15517750

Answer:

1.96 N

Explanation:

⇒This is your full answer

The patient eating a candy bar instead of fasting for the test should be told

that the test results will be wrong and he may receive a wrong diagnosis.

The medical practitioners told him to fast when coming for a reason and he

forgetting and eating something means the objective for the test may have

been defeated.

This is why it's best to explain to him about the consequences of his actions

which is likely getting a wrong result and diagnosis.

Rad more on https://brainly.com/question/19622125

Answer:

Explanation:

Ignoring friction and assuming one ramp end rests on level ground.

gravity acceleration acting parallel to the ramp is gsinθ.

F = mgsinθ

mg = 250 N,  sinθ = 3/25

F = 250(3/25)

F = 30 N

A 25 meter long ramp strong enough to hold a person plus a 250 N refrigerator would weigh much more than 250 N.

Answer:

a) 1 m/s²

b) -1 m/s²

c) 0 m/s² (constant speed, not accelerating)

Explanation:

A

delta speed = 10 - 0

delta time = 10 - 0

delta speed / delta time = 10/10

delta speed / delta time = 1

B

ds = 5 - 10

dt = 15 - 10

ds / dt = -5 / 5

ds / dt = -1

C

ds = 5 - 5

dt = 25 - 15

ds / dt = 0 / 10

ds / dt = 0

The average acceleration of A, B, and C will be 1 m/s², -1 m/s², and 0 m/s².

An object is considered to have been accelerated if its velocity changes. Depending on whether an object is moving faster, slower, or in a different direction, its velocity may change. Examples of acceleration include a falling apple, the moon orbiting the earth, and a car that has stopped at a stop sign. These examples demonstrate how acceleration occurs whenever a moving object modifies its direction, speed, or both.

There are different types of acceleration :

Average acceleration is defined as the average change in velocity with respect to the average change in time.

SI unit is m/s² and it is vector quantity.

According to the question,

For A, Acceleration= (v₁-v₀)/(t₁-t₀)

⇒10-0/10-0

= 1 m/s².

For B, Acceleration= (v₃-v₂)/(t₃-t₂)

⇒5-10/15-10

= -1 m/s²

For C, Acceleration will be constant because change in velocity is constant, this is the case of uniform motion, so its acceleration is also going to be constant (as per the definition of acceleration change in velocity ratio change in time).

For more information about acceleration :

https://brainly.com/question/12550364

#SPJ2

Answer:

(a) f' = 878 Hz

(b) f' = 735 Hz

Explanation:

Answer:

2 times more work

Explanation:

Work is a force times distance

W = Fd

The barbell does not change mass so its weight (force) is constant.

That means work is directly proportional to the distance traveled.

twice the distance means twice the work.

Answer:

The answer is A

Explanation:

The octopus’s tentacle keeps moving right after it is bitten off

Answer:

The answer is a (also add)

Answer:

True

Explanation:

Cohesive forces are the forces that draw molecules of the same type together. Adhesive forces are those that draw molecules of various types together.

Cohesive forces are the forces that draw molecules of the same type together. Adhesive forces are those that draw molecules of various types together.

The force that draws molecules of the same substance together is called the cohesive force. The force that holds molecules of various substances together is known as the adhesive force.

Between molecules of the same substance, there are cohesive forces. There is a natural tendency to resist separation due to these intermolecular forces between like elements. Conversely, adhesive forces draw disparate molecules together.

In physics, cohesion refers to the intermolecular attraction that exists between two adjacent parts of a substance, especially one that is solid or liquid. A piece of matter is held together by this force. Adhesion is a term for the intermolecular forces that act when two dissimilar substances come into contact.

To learn more about cohesive and adhesive force refer to:

https://brainly.com/question/18041818

#SPJ2

Answer:

option B is the correct answer

Explanation:

please follow me and Mark me brainliest please

Answer:

P = 120,000,000

Explanation:

P = m.v

m = (20,000.1000)= 20,000,000kg

v = 0.6 m/s

p = (20,000,000)(0.6)

p = 120,000,000 kg⋅m/s

A. psychodynamic is the personality best explains Sam's behavior

The psychology of mental or emotional forces or processes developing especially in early childhood and their effects on behavior and mental states is called psychodynamic .

Since , any behavior  is not genetical or it never get inherited hence it is not biological . This has been  grown with time and this behavior have been grown in Sam by observing his parents doing the same hence correct option should be A. psychodynamic

learn more about psychodynamic

https://brainly.com/question/10373312?referrer=searchResults

#SPJ2

Let m₁ and m₂ be the masses of the two objects, and v₁ and v₂ their initial velocities. So

m₁ = 30.0 g = 0.0300 kg

m₂ = 13.0 g = 0.0130 kg

v₁ = + 20.5 cm/s = 0.205 m/s

v₂ = + 15.0 cm/s = 0.150 m/s

and we want to find v₁' and v₂', the final velocities of either object after their collision.

Momentum is conserved throughout the objects' collision, so that

m₁v₁ + m₂v₂ = m₁v₁' + m₂v₂'

where v₁' and v₂' are the first and second object's velocities after the collision.

Kinetic energy is also conserved, so that

1/2 m₁v₁² + 1/2 m₂v₂² = 1/2 m₁(v₁')² + 1/2 m₂(v₂')²

or

m₁v₁² + m₂v₂² = m₁(v₁')² + m₂(v₂')²

From the first equation (omitting units), we have

0.0300 • 0.205 + 0.0130 • 0.150 = 0.0300 v₁' + 0.0130 v₂'

0.0810 = 0.0300 v₁' + 0.0130 v₂'

81 = 30 v₁' + 13 v₂'

From the second equation,

0.0300 • 0.205² + 0.0130 • 0.150² = 0.0300 (v₁')² + 0.0130 (v₂')²

0.00155 ≈ 0.0300 (v₁')² + 0.0130 (v₂')²

1.55 ≈ 30 (v₁')² + 13 (v₂')²

Solving both equations simultaneously gives two solutions, one of which corresponds to the initial conditions. The other yields

v₁' ≈ + 0.172 m/s

and

v₂' ≈ + 0.227 m/s

Answer:

False..

Explanation:

An electoMagnets attract iron due to the influence of their magnetic field upon the iron. ...

100000 Pascal

Explanation:

pressure= force/area

Max pressure= force/min area

so f=5

min area= 5×10^-5

5÷5*10^-5 = 100000pascal

Answer:

B.-80.35 J

i dont know the calculation

5.08 m

Explanation:

The weight of the electron is being counteracted by the attractive electrostatic force exerted by the proton above it. We can write the force equation as follows:

[tex]m_eg = k_e\dfrac{Q_pQ_e}{r^2}[/tex]

where the Q's are the charges of the proton and electron, r is the distance between the particles, g is the acceleration due to gravity, [tex]m_e[/tex] is the mass of the electrons and [tex]k_e[/tex] is the Coulomb constant. So solving for r, we get

[tex]r^2 = k_e\dfrac{Q_pQ_e}{m_eg}[/tex]

Taking the square root of r^2, we then get the distance as

[tex]r = \sqrt{k_e\dfrac{Q_pQ_e}{m_eg}}[/tex]

The values are given as follows:

[tex]m_e = 9.11×10^{-31}\:\text{kg}[/tex]

[tex]g = 9.8\:\text{m/s}^2[/tex]

[tex]Q_p = Q_e = 1.60×10^{-19}\:\text{C}[/tex]

[tex]k_e = 8.99×10^9\:\text{N-m}^2\text{/C}^2[/tex]

Putting in all of these values in our equation for r,

[tex]r = \sqrt{\dfrac{(8.99×10^9\:\text{N-m}^2\text{/C}^2)(1.60×10^{-19}\:\text{C})^2}{(9.11×10^{-31}\:\text{kg})(9.8\:\text{m/s}^2)}}[/tex]

[tex]\:\:\:\:\:= 5.08\:\text{m}[/tex]

Hi there!

We know that:

Initial Total Mechanical Energy = Final Total Mechanical Energy

(Ei = Ef)

In this instance:

Ei = Gravitational Potential Energy

Ef = Kinetic Energy

In the absence of friction, ALL of the initial potential energy will be changed into kinetic energy at the bottom of the slide. Thus, the maximum kinetic energy of the child will be 1800 J.

Answer:

sorry for you

The ratio of the man's moment of inertia in the first case (arms extended) to that in the second case (arms drawn in) is 3.2.

The relationship between the rotational frequency [tex](\(\omega\))[/tex] and moment of inertia (I) is given by the equation:

[tex]\[I_1\omega_1 = I_2\omega_2\][/tex]

where [tex]\(I_1\)[/tex]and [tex]\(I_2\)[/tex] are the moments of inertia in the two cases, and [tex]\(\omega_1\) and \(\omega_2\)[/tex] are the corresponding rotational frequencies.

Let's denote the moment of inertia in the first case (arms extended) as [tex]\(I_1\)[/tex] and in the second case (arms drawn in) as [tex]\(I_2\)[/tex]. The given rotational frequencies are [tex]\(\omega_1 = 0.25 \, \text{rev/s}\) and \(\omega_2 = 0.80 \, \text{rev/s}\)[/tex].

Using the equation [tex]\(I_1\omega_1 = I_2\omega_2\)[/tex], we can rearrange it to solve for the ratio of moments of inertia:

[tex]\[\frac{I_1}{I_2} = \frac{\omega_2}{\omega_1}\][/tex]

Substituting the given values, we have:

[tex]\[\frac{I_1}{I_2} = \frac{0.80 \, \text{rev/s}}{0.25 \, \text{rev/s}}\][/tex]

Simplifying the expression, we get:

[tex]\[\frac{I_1}{I_2} = 3.2\][/tex]

Therefore, the ratio of the man's moment of inertia in the first case (arms extended) to that in the second case (arms drawn in) is 3.2.

know more about inertia:

https://brainly.com/question/3268780

#SPJ2

Answer:

Y = 0.5 × 6.36 m/s = 3.18 meters

X = 0.5 × 10.18 m/s = 5.09 meters

Explanation:

X and Y components:

Y = 6.36 m/s

X = 10.18 m/s

Position after 0.5 seconds:

Y = 0.5 × 6.36 m/s = 3.18 meters

X = 0.5 × 10.18 m/s = 5.09 meters

The x and y positions of the ball 0.50s after it is kicked are 5.09 meter and  1.95 meter respectively.

The rate at which a body's displacement changes in relation to time is known as its velocity. Velocity is a vector quantity with both magnitude and direction. SI unit of velocity is meter/second.

Given parameters:

Initial speed of the soccer ball at an angle 32° above the horizontal is: u = 12m/s.

Time interval: t = 0.50 second.

Now, x component of initial velocity = u cosθ = 12 × cos 32° m/s = 10.17 m/s.

y component of initial velocity = u sinθ = 12 × sin32° =6.36 m/s.

Hence,

after 0.50 s, x-position of the ball =  u cosθ t

= 10.17 × 0.50 meter

= 5.09 meter.

after 0.50 s, y-position of the ball =  u sinθ t -gt²/2

= 6.36 × 0.50 - (9.8×0.50²/2) meter

= 1.95 meter.

Learn more about velocity here:

https://brainly.com/question/18084516

#SPJ2

Answer:

I think it's c but don't know for sure

Given the Hubble's constant, the approximate age of the universe is 5.88 × 10⁹ Years.

Given the data in the question;

Hubble's constant; [tex]H_0 = 51km/s/Mly[/tex]

Age of the universe; [tex]t = \ ?[/tex]

We know that, the reciprocal of the Hubble's constant ( [tex]H_0[/tex] ) gives an estimate of the age of the universe ( [tex]t[/tex] ). It is expressed as:

[tex]Age\ of\ Universe; t = \frac{1}{H_0}[/tex]

Now,

Hubble's constant; [tex]H_0 = 51km/s/Mly[/tex]

We know that;

[tex]1\ light\ years = 9.46*10^{15}m[/tex]

so

[tex]1\ Million\ light\ years = [9.46 * 10^{15}m] * 10^6 = 9.46 * 10^{21}m[/tex]

Therefore;

[tex]H_0 = 51\frac{km}{\frac{s}{Mly} } = 51000\frac{m}{s\ *\ Mly} \\\\H_0 = 51000\frac{m}{s\ *\ (9.46*10^{21}m)} \\\\H_0 = 5.39 *10^{-18}s^{-1}\\[/tex]

Now, we input this Hubble's constant value into our equation;

[tex]Age\ of\ Universe; t = \frac{1}{H_0}\\\\t = \frac{1}{ 5.39 *10^{-18}s^{-1}} \\\\t = 1.855 * 10^{17}s\\\\We\ convert\ to\ years\\\\t = \frac{ 1.855 * 10^{17}}{60*60*24*365}yrs \\\\t = \frac{ 1.855 * 10^{17}}{31536000}yrs\\\\t = 5.88 *10^9 years[/tex]

Therefore, given the Hubble's constant, the approximate age of the universe is 5.88 × 10⁹ Years.

Learn more: https://brainly.com/question/14019680

Answer:

The answer is D

Explanation:

The chloroplast absorbs sunlight for energy not the cell wall

Answer:

30.3 meters, 172 degrees

Explanation:

To insure the most accurate solution, this problem is best solved using a calculator and trigonometric principles. The first step is to determine the sum of all the horizontal (east-west) displacements and the sum of all the vertical (north-south) displacements.

Horizontal: 2.0 meters, West + 31.0 meters, West + 3.0 meters, East = 30.0 meters, West

Vertical: 12.0 meters, North + 8.0 meters, South = 4.0 meters, North

The series of five displacements is equivalent to two displacements of 30 meters, West and 4 meters, North. The resultant of these two displacements can be found using the Pythagorean theorem (for the magnitude) and the tangent function (for the direction). A non-scaled sketch is useful for visualizing the situation.

Applying the Pythagorean theorem leads to the magnitude of the resultant (R).

R2 = (30.0 m)2 + (4.0 m)2 = 916 m2

R = Sqrt(916 m2)

R = 30.3 meters

The angle theta in the diagram above can be found using the tangent function.

tangent(theta) = opposite/adjacent = (4.0 m) / (30.0 m)

tangent(theta) = 0.1333

theta = invtan(0.1333)

theta = 7.59 degrees

This angle theta is the angle between west and the resultant. Directions of vectors are expressed as the counterclockwise angle of rotation relative to east. So the direction is 7.59 degrees short of 180 degrees. That is, the direction is ~172 degrees.

Explanation:

static electricity draws energy

Answer:

Explanation:

Given,

As we know,

Kinetic Energy,

Therefore ,

Kinetic energy of the object is,

[tex] = \frac{1}{2} \times 12 \: kg \times 10 \: m {s}^{ - 1} \times 10 \: m {s}^{ - 1} [/tex]

= (6 × 10 × 10) J [As 'J' stands for 'joule']

= 600 J (Ans)