Addition of phenolphthalein to an unknown colorless solution does not cause a color change. The addition of bromthymol blue to the same solution leads to a yellow color.
A)s the solution acidic, neutral, or basic?
B) Which of the following can you establish about the solution: a) a max pH b)a specific range of pH value c) a min pH
C) What other indicator or indicators would you want to use to determine the pH of the solution more precisely? (more than one may apply) alizarin yellow R, methyl violet, methyl red , or all the above.

Answers

Answer 1

If yellow bromthymol blue is present, the solution is acidic. In an acidic solution, phenolphthalein, an acid-base indicator, is colourless; nevertheless, as the solution becomes alkaline, it turns pink or red.

The phenolphthalein indicator changes what colour?

An indicator, such as phenolphthalein, changes colour when it comes into contact with an acid or a basic. If it comes into contact with an acid like vinegar or a neutral substance like water, it remains colourless; if it comes into contact with something basic like ammonia, it turns purple.

What shade of blue does bromothymol have in both an acid and a base?

The acid bromthymol blue is weak. Depending on the pH of the solution, it may take the form of an acid or a basic. This reagent turns blue in basic solutions and yellow in acidic solutions.

To know more about indicator visit:-

brainly.com/question/29016702

#SPJ1


Related Questions

what are the proteins that help our bodies break down chemicals for energy usage?

Answers

Enzymes, and transport proteins, including mitochondrial proteins are among the proteins that aid in the chemical oxidation process for the production of energy.

The human body uses a variety of protein types to break down molecules for energy production.

The class of biological catalysts that speed up chemical processes in the body includes enzymes. Enzymes take part in several metabolic processes that transform proteins, lipids, and carbohydrates into simpler molecules that can be converted to energy.

The transport proteins are a different group of proteins involved in energy metabolism. These proteins help molecules traverse cell membranes so they can go to the places where energy is produced, such as glucose and amino acids.

Finally, there are the mitochondrial proteins, which are located in the mitochondria, the organelles responsible for energy production in the body. These proteins play a critical role in the electron transport chain and oxidative phosphorylation, which generate ATP, the main energy currency of the body.

Learn more about classes of protein at

https://brainly.com/question/17095120

#SPJ4

you have an enzymatic reaction proceeding at the optimum ph and optimum temperature. you add a competitive inhibitor to the reaction and notice that the reaction slows down.

Answers

A competitive inhibitor competes with the substrate for binding during an enzymatic process by attaching to the enzyme's active site. When the inhibitor prevents the substrate from attaching and turning into product, the rate of the reaction decreases as a result.

The presence of the competitive inhibitor can still cause the reaction to slow down even though the pH and temperature are optimal for the reaction. This is because the inhibitor is attaching to the enzyme's active site, which is required for the reaction to take place. As a result, the enzyme cannot convert the substrate into the product as well as it might if the inhibitor were not present.

Increasing the amount of substrate such that it competes with the inhibitor for binding to the enzyme's active site can help overcome the inhibition. Another choice is to chemically or by employing an alternative enzyme that is unaffected by the inhibitor remove it from the reaction mixture.

learn more about enzymatic process here:

https://brainly.com/question/28827774

#SPJ4

what is melting point 9 10-dihydroanthracene-9 10-α β-succinic anhydride?

Answers

The melting point of 9,10-dihydroanthracene-9,10-αβ-succinic anhydride is 200-205°C. 9,10-dihydroanthracene-9,10-αβ-succinic anhydride is a product of the reaction of 9,10-dihydroanthracene with maleic anhydride.

The temperature at which a substance transitions from a solid to a liquid state is known as its melting point (or, less frequently, liquefaction point). The solid and liquid phases are in equilibrium at the melting point. Pressure affects a substance's melting point, which is typically reported at a standard pressure such 1 atmosphere or 100 kPa. The freezing point or crystallisation point is the point at which a substance reverses its state from liquid to solid. Due to a substance's capacity for supercooling, the freezing point might frequently appear to be lower than it actually is.

This compound is classified as an anhydride because it is made up of two carbonyl groups that are both linked to oxygen atoms. It has a molecular weight of 280.30 grams per mole. Furthermore, the compound's melting point is 200-205°C.The chemical reaction that produces 9,10-dihydroanthracene-9,10-αβ-succinic anhydride.

This reaction produces 9,10-dihydroanthracene-9,10-αβ-succinic anhydride, which is a white solid. It has a molecular weight of 280.30 grams per mole, and its melting point is 200-205°C.

For more such questions on melting point , Visit:

https://brainly.com/question/40140

#SPJ11

Complete the statement: The furanose form of fructose is generated by formation of a hemiketal involving the attack of the hydroxyl group on carbon _____ with carbon _____.
5; 2
2; 6
6; 1
6; 2

Answers

The furanose form of fructose is generated by formation of a hemiketal involving the attack of the hydroxyl group on carbon  2  with carbon 5  .

Option 1 is correct..

In its linear form, fructose has a ketone functional group on carbon 2 and five hydroxyl groups. In aqueous solutions, fructose can undergo a reversible intramolecular reaction between the ketone group and one of the hydroxyl groups, resulting in the formation of a cyclic hemiketal ring.

The furanose form of fructose is an important carbohydrate molecule that plays a key role in many biological processes, such as energy metabolism and signal transduction. It is also used as a sweetener in various food and beverage products. Correct option is: 1.

To know more about hemiketal ring, here

brainly.com/question/13063932

#SPJ4

-- The complete question is, Complete the statement: The furanose form of fructose is generated by formation of a hemiketal involving the attack of the hydroxyl group on carbon _____ with carbon _____.

1. 5; 2

2. 2; 6

3. 6; 1

4. 6; 2 --

An amine that is insoluble in water can be made to dissolve by adding it to an aqueous solution of Select one: O a. HCI O b. NaOH O c. an amide O d. none of the above; it can't be made water soluble

Answers

An amine that is insoluble in water can be made to dissolve by adding it to an aqueous solution of NaOH.

Therefore, option b. NaOH is correct option.

An amine is an organic compound with the formula RNH2 or R2NH or R3N, where R is an alkyl or aryl group. Amines are a type of derivative of ammonia, with one or more hydrogen atoms replaced by organic substituents.

Amines are classified as primary, secondary, or tertiary depending on the number of substituents attached to the nitrogen atom. Furthermore, they are weak bases, with aqueous solutions having pH values greater than 7 because of the presence of the amino group. When amines dissolve in water, they can act as either Bronsted-Lowry bases or Lewis bases. However, most amines are insoluble in water.Water-soluble amines Amines, despite being basic compounds, are often insoluble in water, which is a polar solvent.

As a result, they may be made water-soluble by reacting with acids. For instance, when an amine is added to an aqueous solution of hydrochloric acid, the amine ionizes and dissolves in the acidic solution. Water-soluble salts, such as ammonium chloride, are formed. Other acid-based techniques for making amines water-soluble include reacting them with sulfonic acids and oxoacids. Amines with low molecular weight are also soluble in water because they can form hydrogen bonds with water molecules.Solubility in water may be achieved by adding an amine to an aqueous solution of NaOH, which serves as a base, neutralizing the amine and making it soluble. Water-insoluble amines are converted to water-soluble compounds when they react with NaOH.

for such more question on amine

https://brainly.com/question/9631835

#SPJ11

Suppose you make a calibration curve as described in the pre-lab information and get a linear equation in the form of y = mx +b. Assuming the path length is 1 cm, what is represented by the "y" in the equation? concentration molar absorptivity absorbance path length

Answers

The "y" in a calibration curve using the formula y = mx + b stands for a solution's absorbance (or optical density). The quantity of light at a specific wavelength that a material absorbs is measured by its absorbance, which is directly proportional to both.

the substance's concentration in solution and the length of the light's passage through the solution. The wavelength of maximum absorbance of the material being evaluated determines the molar absorptivity, a constant, whereas the path length is the distance that light travels through the solution, often stated in centimetres. Thus, the "y" variable in the equation y = mx + b reflects the solution's absorbance that is being measured.The absorbance (or optical density) of the solution being tested is represented by the "y" variable in the equation y = mx + b. The quantity of light at a specific wavelength that is absorbed by a material in solution is measured by its absorbance, which is directly proportional to both the substance's concentration and the length of the light's passage through the solution.

learn more about calibration curve here:

https://brainly.com/question/29729322

#SPJ4

please answer that, ​

Answers

Each of the functions in column A will be performed by their respective hormones. Each of the hormones in the human body has a different function.

What is a hormone?

A hormone is a chemical substance that is produced by a gland or a group of cells and is transported by the bloodstream to target cells or organs in the body. They are produced by endocrine glands.

To answer your question:

1. Needed by the body tor water reabsorption - Parathormone2. Needed by the body to increase blood calcium level - Calcitonin3 . Needed by the body to increase one's height - Somatotropin4. Needed by the body to combat insomnia - Endorphin5 . Needed by the body to shield the body from UV rays - Melanocyte SH6 . Needed by the body for proper metabolism - Thyroxine7 . Needed by the body to reduce physical pain or injury - Endorphin8 . Needed by the body to reduce symptoms of stress - Melatonin9 . Needed by the body to develop boy's sex characteristics - Androgen1 0 . Needed by the body to lower blood sugar level - Glucagon



To know more about hormones, visit:

https://brainly.com/question/24383458

#SPJ1

n-octane gas (c8h18) is burned with 95 % excess air in a constant pressure burner. the air and fuel enter this burner steadily at standard conditions and the products of combustion leave at 265 0c. calculate the heat transfer during this combustion 37039 kj/ kg fuel

Answers


The heat transfer during the combustion of n-octane gas (C8H18) with 95% excess air in a constant pressure burner is 37039 kJ/kg fuel. This is calculated using the enthalpy of the formation of the products and reactants. The air and fuel enter the burner steadily at standard conditions, and the products of combustion leave at 265°C.

The enthalpy of combustion of the fuel is determined by subtracting the enthalpy of formation of the reactants from the enthalpy of formation of the products. The enthalpy of formation of the reactants is determined by multiplying the standard enthalpy of formation for each compound in the reaction by the number of moles of each compound and adding the result.


The enthalpy of formation of the products is determined by multiplying the standard enthalpy of formation for each compound in the reaction by the number of moles of each compound and adding the result. The heat transfer during combustion is then determined by subtracting the enthalpy of formation of the reactants from the enthalpy of formation of the products, resulting in 37039 kJ/kg fuel.


The heat transfer during the combustion of n-octane gas (C8H18) can be calculated using the formula Q = m × Cp × ΔT. Here, m is the mass of the fuel burnt, Cp is the specific heat capacity, and ΔT is the change in temperature. Let's substitute the given values: Mass of fuel burnt = 1 kg (since 37039 kJ/kg fuel is given)Cp of n-octane gas = 2.22 kJ/kg/K (given)ΔT = (265 - 25) = 240 K (since the temperature of products is given as 265°C = 538 K and standard temperature is 25°C = 298 K)Therefore, the heat transfer during combustion of n-octane gas is: Q = m × Cp × ΔT = 1 × 2.22 × 240 = 532.8 kJAnswer: The heat transfer during this combustion is 532.8 kJ.

For more information follow the link: https://brainly.com/question/14754029

#SPJ11

If four molecules of carbon dioxide enter the Calvin cycle (four "turns" of the cycle), how many G3P molecules are produced and how many are exported? a. 4 G3P made, 1 G3P exported b. 4 G3P made, 2 G3P exported c. 8 G3P made, 1 G3P exported d. 8 G3P made, 4 G3P exported

Answers

If four molecules of carbon dioxide enter the Calvin cycle (four "turns" of the cycle), eight G3P molecules are produced, and four G3P molecules are exported is d. 8 G3P made, 4 G3P exported.

The Calvin cycle is the collection of chemical reactions that occur in chloroplasts during photosynthesis. The Calvin cycle transforms CO2, using the energy from ATP and NADPH produced in the light reactions, into the sugar G3P. Three G3P molecules are created for every three CO2 molecules that enter the cycle. Every G3P molecule has three carbon atoms. If four molecules of CO2 enter the Calvin cycle (four "turns" of the cycle), eight G3P molecules are produced, and four G3P molecules are exported.

In the first step of the Calvin cycle, three CO2 molecules are combined with three RuBP molecules to form six 3-PGA molecules, which are then converted into six G3P molecules. However, five of the six G3P molecules must be recycled into RuBP so that the cycle can continue. As a result, only one G3P molecule out of the six created is exported from the cycle. So, every four CO2 molecules that enter the Calvin cycle create two G3P molecules that are exported out of the cycle.

Learn more about calvin cycle at:

https://brainly.com/question/30668606

#SPJ11

Write the formula for the conjugate acid of each of the following bases.Express your answer as a chemical formula.a)C2H5NH2b)ClO4-c)HPO42-d)HCO3-

Answers

Conjugate acid forms by adding H+ to a base, making a species with a positive charge. Strength depends on the base's strength. Important in acid-base reactions.

The conjugate acid of a base is the species that is formed when a proton (H+) is added to the base molecule. It has one more proton than the base and will have a positive charge. The strength of the conjugate acid depends on the strength of the original base, with the conjugate acid of a weak base being a weak acid, and the conjugate acid of a strong base being a weak acid. The formulas for the conjugate acids of the given bases are C2H5NH3+ for C2H5NH2, HClO4 for ClO4-, H2PO4- for HPO42-, and H2CO3 for HCO3-. Understanding conjugate acids is important in acid-base chemistry because it helps to explain the behavior of acids and bases in chemical reactions.

learn more about conjugate acid here:

https://brainly.com/question/30164261

#SPJ4

describe the chemistry of biurets reagent, explaining how it works and, specifically, why you used absorbance of 550 nm to quantify protein concentration.

Answers


Biurets reagent is a solution of potassium hydroxide and copper sulfate used to measure the concentration of proteins. The reagent works by breaking down peptide bonds and creating a pink or purple solution when proteins are present. The absorbance of 550 nm is used to quantify the protein concentration because it is the wavelength that best corresponds to the color change of the solution.


Biurets reagent is a solution containing copper sulfate, sodium hydroxide, and potassium sodium tartrate. The copper ions in the biuret reagent combine with the peptide bonds present in proteins, forming a violet-colored complex. The intensity of the violet coloration is proportional to the concentration of proteins in the sample being analyzed. Absorbance at 550 nm is used to quantify protein concentration because this is the wavelength at which the violet color produced by the copper ion-peptide bond complex has maximum absorbance. By measuring the absorbance at this wavelength, the concentration of the protein in the sample can be determined through a standard curve that relates the absorbance values to known protein concentrations. The biuret test is commonly used to determine protein concentration in a variety of biological and chemical samples. The test is widely used because it is relatively simple and can be performed quickly. The biuret test is often used in combination with other analytical techniques to obtain more detailed information about protein samples.

For more information follow the link: https://brainly.com/question/4596250

#SPJ11

which simple distillation resulted in a better separation of the two liquids- cyclohexane:toluene or cyclohexane:p-xylene? was this what you expected based on the boiling points of the liquids? explain.

Answers

The simple distillation of cyclohexane: toluene resulted in a better separation of the two liquids than cyclohexane: p-xylene, due to the boiling points of these liquids.

In the distillation process, the mixture of liquids is heated in a flask, and the vapors of one liquid are separated from the mixture and then collected in another flask, as it reaches the condenser. The vapors condense to liquid form as they come in contact with the cold walls of the condenser.

The separation process in simple distillation depends on the difference in the boiling points of two liquids. In the given question, the boiling point of cyclohexane is 80.7°C, the boiling point of toluene is 110.6°C, and the boiling point of p-xylene is 138.4°C.

As we can see, toluene has a higher boiling point than cyclohexane, while p-xylene has a higher boiling point than toluene. Therefore, the boiling point difference between cyclohexane and toluene is 29.9°C, while the boiling point difference between cyclohexane and p-xylene is 57.7°C.

Thus, it is expected that simple distillation of cyclohexane: toluene resulted in a better separation of the two liquids than cyclohexane: p-xylene. Because the boiling point difference of cyclohexane: toluene is less than that of cyclohexane: p-xylene.

The difference in the boiling points of two liquids is a crucial factor in the separation of two liquids through simple distillation. The smaller the boiling point difference between the two liquids, the better is the separation through simple distillation. Thus, the simple distillation of cyclohexane: toluene resulted in better separation than cyclohexane: p-xylene.

Learn more about distillation here: https://brainly.com/question/24553469.

#SPJ11

buffers are made from weak conjugate acid-base pairs. in part 1 of this experiment, a solution of weak acid is mixed with another solution of weak acid to which the strong base naoh has been added.

Answers

Buffers are made from weak conjugate acid-base pairs. In part 1 of this experiment, a solution of weak acid is mixed with another solution of weak acid to which the strong base NaOH has been added.

What is a buffer?

A buffer is a solution that can resist changes in pH when acid or base is added. They are used to keep the pH of solutions stable in various chemical and biological systems, including industrial processes, drugs, and the human body. A buffer is a mixture of a weak acid and its conjugate base or a weak base and its conjugate acid.The following are the features of a buffer:It is a solution that resists changes in pH.It consists of a weak acid and its corresponding base.The buffering effect is maximized when the ratio of weak acid to its corresponding base is 1:1.A buffer resists pH changes in either direction, and it has a maximum buffering capacity when pH is within one unit of its pKa. The buffering capacity of the solution is increased by increasing the buffer concentration.

A weak acid is one that only partially dissociates in water to produce hydrogen ions (H+) and anions. Its conjugate base is the species that results from the removal of a proton from the acid. As an example, ammonia (NH3) is a weak base, and its conjugate acid is ammonium (NH4+). The reverse reaction produces the acid and base when the acid is added to water.

Learn more about buffer solution on:

https://brainly.com/question/8676275

#SPJ11

Suppose the molar solubility of Ag2CrO4 in water is x M, while its molar solubility in a 0.005 M solution of Na2CrO4 is y M. Which of the following is correct?A) It can't be determined.B) x < yC) x > yD) x = y

Answers

When Ag2CrO4 is dissolved in a Na2CrO4 solution, its molar solubility decreases. In other words, x > y.The correct answer is c.

The molar solubility is the quantity of a solute (in moles) that can be dissolved per liter of solution (in liters) at equilibrium. It is a measure of the solubility of the solute in the solvent.

Solubility is a measure of a compound's ability to dissolve in a particular solvent at a particular temperature and pressure.According to the common ion effect, the presence of a common ion decreases the solubility of a substance in solution.

Because Na2CrO4 and Ag2CrO4 are both soluble in water, they will dissociate into their constituent ions when dissolved in water according to the following reactions:Na2CrO4 → 2Na+ + CrO42-Ag2CrO4 → 2Ag+ + CrO42-When Ag2CrO4 dissolves in a Na2CrO4 solution, however, the addition of the common chromate ion, CrO42-, will push the above equilibrium to the left, resulting in a decrease in the amount of Ag2CrO4 that dissolves.

As a result, when Ag2CrO4 is dissolved in a Na2CrO4 solution, its molar solubility decreases. In other words, x > y.

Learn more about molar solubility here:

brainly.com/question/28170449

#SPJ11

You are measuring the speeds of two particles at the same conditions. The more massive particle will move...A. At a changing speed.B. At a quicker speedC. At a slower speedD. at the same speed as the less-massive particle

Answers

You are measuring the speeds of two particles at the same conditions. The more massive particle will move At a slower speed. The correct option is C. At a slower speed.

When you measure the speeds of two particles at the same conditions, the more massive particle will move at a slower speed than the less massive particle. This is because the speed of a particle is directly proportional to its kinetic energy. The more massive particle has more kinetic energy than the less massive particle. Thus, it will require more energy to move the more massive particle at the same speed as the less massive particle. Since the more massive particle has more inertia, it requires more energy to move it, and it moves slower. This is why the more massive particle will move at a slower speed than the less massive particle. The energy required to move an object increases with its mass.

Therefore, if two particles of different masses are at the same conditions, they will have different speeds. The less massive particle will move faster than the more massive particle. Thus, it can be concluded that the speed of a particle depends on its mass, and a more massive particle moves slower than a less massive particle.

for such more question on massive particle

https://brainly.com/question/29508018

#SPJ11

what substrate concentration is typically utilized in enzymatic analyses to ensure zero-order kinetics?

Answers

A substrate concentration of 10-100 mM is sufficient to achieve zero-order kinetics.

The substrate concentration utilized in enzymatic analyses to ensure zero-order kinetics is a high substrate concentration.

A high substrate concentration is typically utilized in enzymatic analyses to ensure zero-order kinetics.

Zero-order kinetics refers to the reaction rate's independence on the substrate concentration's magnitude when the substrate concentration is significantly greater than the enzyme concentration in the reaction.

Kinetic behavior is when the reaction rate is constant and not dependent on substrate concentration.

Thus, a substrate concentration that is 10- to 20-fold higher than the enzyme concentration, that is around 10-100 mM is used to achieve zero-order kinetics.

Learn more about substrate concentration here:

brainly.com/question/29238037

#SPJ11

oxalic acid, which is present in rhubarb, was found to consist of 26.68% c, 2.24% h, and 71.08% o by mass. find the empirical formula for oxalic acid.

Answers

The empirical formula for oxalic acid is C2H2O2.

Oxalic acid, which is present in rhubarb, was found to consist of 26.68% C, 2.24% H, and 71.08% O by mass.

What is the empirical formula for oxalic acid?

Empirical formula is the simplest formula that represents the composition of a compound in terms of atoms, and it can be obtained by calculating the ratio of atoms of each element in the compound.

The empirical formula of oxalic acid can be found by assuming 100 g of the compound so that the mass percent can be expressed as grams of each element. In the next step, these grams will be converted into moles for each element using their molar mass. The empirical formula will then be the ratio of atoms for each element in the compound.

Let's find out the number of moles of each element in oxalic acid.

C = 26.68 g = 26.68 / 12.01 = 2.22 molH = 2.24 g = 2.24 / 1.01 = 2.22 molO = 71.08 g = 71.08 / 16.00 = 4.44 mol

As the atomic ratios are the same for all three elements, the empirical formula is C2H2O2, and this formula is also called the simplest formula for oxalic acid. The empirical formula for oxalic acid is C2H2O2.

Learn more about acids: https://brainly.com/question/25148363

#SPJ11

what type of radioactive decay process will occur when an isotope has a greater proton to neutron ratio?

Answers

When an isotope has a greater proton to neutron ratio, the type of radioactive decay process that will occur is beta decay.

Radioactive decay is the process by which an atomic nucleus breaks down, releasing radiation in the form of particles or waves. This results in the decay of a radioactive element into a different element.

The following are the three major forms of radioactive decay:

Alpha decay, Beta decay, Gamma decay.

Alpha decay is the process by which an alpha particle is released by an atomic nucleus. The mass of the nucleus decreases by four units, while the atomic number decreases by two units.

Beta decay is the type of radioactive decay that occurs when an isotope has a greater proton to neutron ratio. The decay of a neutron into a proton and an electron is referred to as beta decay. The mass number of the nucleus stays constant, but the atomic number increases by one unit.

The radioactive decay process that occurs when an isotope emits a gamma ray is known as gamma decay. A gamma ray is a high-energy electromagnetic wave that carries no mass and no charge. The atomic number and mass number of the nucleus are both unchanged as a result of gamma decay.

For more such questions on isotope, click on:

https://brainly.com/question/14220416

#SPJ11

(a) 0.12 g of magnesium reacted to produce 0.20 g of magnesium oxide.
Calculate the number of moles of oxygen gas (O₂) that reacted.
Relative atomic mass (A): 0 = 16

(b)
The student repeated the experiment without a lid on the crucible.
Suggest why the mass of magnesium oxide produced would be different without a lid on the crucible.

Answers

(a) The number of moles of oxygen gas (O₂) that reacted is 0.00325 mol.

(b) When the experiment is repeated without a lid on the crucible, the magnesium oxide produced will react with any oxygen present in the air.

What is the number of moles of oxygen?

(a) To calculate the number of moles of oxygen gas (O₂) that reacted, we need to first determine the number of moles of magnesium that reacted using its atomic mass:

Mass of magnesium (Mg) = 0.12 g

Atomic mass of Mg = 24.31 g/mol (from periodic table)

Number of moles of Mg = Mass of Mg / Atomic mass of Mg

= 0.12 g / 24.31 g/mol

= 0.00494 mol

The balanced chemical equation for the reaction between Mg and O₂ to produce MgO is:

2Mg + O₂ → 2MgO

From the equation, we can see that 2 moles of Mg react with 1 mole of O₂ to produce 2 moles of MgO.

Therefore, the number of moles of O₂ that reacted can be calculated as follows:

Number of moles of MgO produced = Mass of MgO / Molar mass of MgO

= 0.20 g / (24.31 g/mol + 16.00 g/mol)

= 0.00650 mol

Since 2 moles of MgO are produced from 1 mole of O₂, the number of moles of O₂ that reacted can be calculated as:

Number of moles of O₂ = Number of moles of MgO produced / 2

= 0.00650 mol / 2

= 0.00325 mol

(b) When the experiment is repeated without a lid on the crucible, the magnesium oxide produced will react with any oxygen present in the air. This will cause the mass of magnesium oxide produced to be greater than when the experiment was conducted with a lid on the crucible, as more oxygen will react with the magnesium.

Additionally, any water vapor or other gases present in the air may also react with the magnesium oxide, further affecting the mass of the final product. Therefore, the mass of magnesium oxide produced will be different without a lid on the crucible due to the presence of additional reactants in the air.

Learn more about number of moles here: https://brainly.com/question/13314627

#SPJ1

Study the drawing of the combination electrode you will make in this experiment and answer the following questions. What are the components of the reference and of the working electrodes? What is the function of the attached string? How must the string be placed so that it functions properly?

Answers

The combination electrode in the given drawing is made up of a reference electrode and a working electrode.

What are the components of the reference and of the working electrodes?

The working electrode in the given combination electrode is made up of a platinum wire. The platinum wire is coated with platinum black. This is the black substance on the lower part of the platinum wire in the given drawing.

The reference electrode is made up of a silver wire that is coated with silver chloride. A small amount of KCl solution is placed in the tube at the top of the silver wire.

What is the function of the attached string?

The string that is attached to the combination electrode is used to immerse the electrode in a solution. It is attached to the top of the reference electrode. The string also acts as a support to prevent the combination electrode from sinking into the solution being measured.

How must the string be placed so that it functions properly?

The string should be attached to the top of the reference electrode. When the combination electrode is immersed in the solution, the string should be at the top so that the electrode does not sink into the solution being measured.

See more about electrode in:

https://brainly.com/question/17362810

#SPJ11

Given the kinetics data for each enzyme in the presence and absence of its inhibitor, determine the type of inhibition. Enzyme carbonic anhydrase + inhibitor A chymotrypsin + inhibitor B penicillinase + inhibitor C lysozyme + inhibitor D carboxypeptisase A + inhibitor E KM (MM) 8,000 12,000 5,000 5,000 50 30 6 15 3 Vmax (mmol/s) 600,000 600,000 100 75 2,000 1,500 0.5 0.5 1,000 800 Competitive Noncompetitive Uncompetitive

Answers

The type of inhibition for each enzyme in the presence of its inhibitor is as follows:

carbonic anhydrase + inhibitor A: competitive inhibition chymotrypsin + inhibitor B: noncompetitive inhibition penicillinase + inhibitor C: noncompetitive inhibition lysozyme + inhibitor D: noncompetitive inhibition carboxypeptidase A + inhibitor E: noncompetitive inhibition

What is enzyme inhibition?

Inhibitors that do not contribute to the development of the product carry out the inhibition. The inhibitors can impact both the substrate and the enzyme. The stoppage of enzyme activity is referred to as enzyme inhibition.

To determine the type of inhibition for each enzyme in the presence of its inhibitor, we can compare the kinetics data for the enzyme alone and in the presence of the inhibitor. Specifically, we can compare the changes in KM and Vmax values.

   For carbonic anhydrase + inhibitor A: In the presence of inhibitor A, KM increases and Vmax remains constant. This indicates that inhibitor A is a competitive inhibitor.

   For chymotrypsin + inhibitor B: In the presence of inhibitor B, both KM and Vmax decrease. This indicates that inhibitor B is a noncompetitive inhibitor.

   For penicillinase + inhibitor C: In the presence of inhibitor C, both KM and Vmax decrease. This indicates that inhibitor C is a noncompetitive inhibitor.

   For lysozyme + inhibitor D: In the presence of inhibitor D, KM decreases and Vmax remains constant. This indicates that inhibitor D is an noncompetitive inhibitor.

   For carboxypeptidase A + inhibitor E: In the presence of inhibitor E, KM increases and Vmax decreases. This indicates that inhibitor E is a mixed inhibitor, which can be further classified as noncompetitive since KM decreases more than Vmax decreases.

Therefore, the type of inhibition for each enzyme in the presence of its inhibitor is as follows:

   carbonic anhydrase + inhibitor A: competitive inhibition    chymotrypsin + inhibitor B: noncompetitive inhibition    penicillinase + inhibitor C: noncompetitive inhibition    lysozyme + inhibitor D: uncompetitive inhibition    carboxypeptidase A + inhibitor E: noncompetitive inhibition

Learn more about enzyme inhibition on:

https://brainly.com/question/14944549

#SPJ11

Which of the following bonds would be the most polar without being considered ionic?
a. F-H
b. Na-F
c. S-H
d. Cl-H
e. O-H

Answers

The bond which would be the most polar without being considered ionic is O-H. Thus, option e is correct.

What is a polar bond?

A polar bond is defined as a bond between two atoms where there is an uneven distribution of electrons between the atoms.

What is an ionic bond?

Ionic bonds are bonds that occur between two atoms when one atom donates its electron to another atom, resulting in the two atoms being electrically attracted to each other.

Polar covalent bonds occur when electrons are unequally shared between two atoms.

This occurs when two atoms have different electronegativity values, meaning that one atom pulls more strongly on the shared electrons than the other atom.

Thus, the O-H bond would be the most polar without being considered ionic.

Learn more about polar bonds here:

https://brainly.com/question/545359

#SPJ11

Calcium carbonate, CaCO3, is able to remove sulfur dioxide, SO2, from waste gases by a reaction in which they react in a 1: 1 stoichiometric ratio to form equimolar amounts of CaSO3. When 255 g of CaCO3 reacted with 135 g of SO2, 198 g of CaSO3 were formed. Determine the percentage yield of CaSO3

Answers

The percentage yield of CaSO3 is approximately 69%.

CaCO3 + SO2 → CaSO3 + CO2

Number of moles of CaCO3 = 255 g / 100.09 g/mol = 2.549 mol

Number of moles of SO2 = 135 g / 64.06 g/mol = 2.109 mol

Since the reaction is 1:1 stoichiometric, the number of moles of CaSO3 formed is 2.109 mol. We can then calculate the theoretical yield of CaSO3:

Theoretical yield of CaSO3 = 2.109 mol x 136.14 g/mol = 286.9 g

Percentage yield = (Actual yield / Theoretical yield) x 100%

The actual yield is given as 198 g. Plugging in the values, we get:

Percentage yield = (198 g / 286.9 g) x 100% ≈ 69%.

Stoichiometric is the study of the quantitative relationship between reactants and products in a chemical reaction. The stoichiometric ratio is the ratio of the moles of one substance to the moles of another substance in a chemical reaction.

For example, consider the reaction between hydrogen gas (H2) and oxygen gas (O2) to form water (H2O). The balanced chemical equation for this reaction is 2H2 + O2 → 2H2O. The stoichiometric ratio for this reaction is 2:1. This means that for every two moles of hydrogen gas reacted, one mole of oxygen gas is required to completely react with it and form two moles of water.

Stoichiometric is important in chemical reactions because it allows us to determine the number of reactants needed to produce a certain amount of product or the amount of product that can be produced from a given amount of reactants. This information is crucial in industrial and laboratory settings where the cost of materials and the desired yield of the product are important factors.

To learn more about Stoichiometric visit here:

brainly.com/question/6907332

#SPJ4

For E2 elimination reactions to occur, chair conformations of halocyclohexanes must have both the H and the X atoms in _____ positions

Answers

For E2 elimination reactions to occur, chair conformations of halocyclohexanes must have both the H and the X atoms in axial positions. The E2 elimination reaction is a type of elimination reaction that is dependent on the substrate and the strength of the base used. It is a bimolecular process that happens when two molecules, the substrate, and the base, collide with each other.

The E2 reaction is a one-step process in which the leaving group and the hydrogen ion are lost from the substrate at the same time, resulting in the formation of a pi bond. In a halocyclohexane molecule, there are two positions for the H and X atoms, axial and equatorial.

However, in order for the E2 reaction to occur, the H and X atoms must be in axial positions so that they are in the same plane as the leaving group. This ensures that the hydrogen ion and the leaving group can be lost from the substrate at the same time, resulting in the formation of a pi bond.

Know more about  elimination reactions here:

https://brainly.com/question/29695970

#SPJ11

In a recrystallization, the crystals do not always form spontaneously after cooling, even though the solution is supersaturated. Which of the following will help crystals form? More than one answer may be correct.
1. Scrape the inside of the Erlenmeyer flask with a glass rod below the surface of the solvent.
2. Add a scrap of paper to nucleate the crystals.
3. Add some crystals of the compound you are trying to crystallize.
4. Add some crystals of any kind.
5. Scrape the outside of the Erlenmeyer flask with a glass rod.

Answers

To help the crystals form, these three options are correct- 1. Scrape the inside of the Erlenmeyer flask with a glass rod below the surface of the solvent. 2. Add a scrap of paper to nucleate the crystals. 3. Add some crystals of the compound you are trying to crystallize.

What is crystallization?

Crystallization is the process of a solid material forming a structured arrangement of its particles, typically resulting in a highly ordered and often repeating pattern. This can be seen in the formation of solid crystals such as salt, sugar, and diamonds. Crystallization occurs when molecules of the solid tend to organize themselves into a more ordered pattern.

How adding a scrap of paper to nucleate the crystals will result in formation of crystals?

Adding a scrap of paper to nucleate the crystals is a process known as seeding. Seeding involves introducing a small crystal into a container of supersaturated solution, which then provides a nucleus for additional crystals to form around. This process accelerates the growth of the crystals and can be used to create larger, more consistent crystals. It can also be used to create crystals with specific shapes and sizes. The addition of a scrap of paper encourages the solution to form around it, helping to encourage the formation of crystals.

To know more about Erlenmeyer flask, visit:

https://brainly.com/question/10261429

#SPJ1

which of the following pairs of aqueous solutions will form a precipitate when mixed? which of the following pairs of aqueous solutions will form a precipitate when mixed? mgcl2 koh li2s hbr k2co3 hno3 hbr lioh all of these solution pairs will produce a precipitate.

Answers

The pair of aqueous solutions that will produce a precipitate when mixed is K2CO3 & HNO3.

The precipitate is a solid substance that separates from a solution after mixing with another solution.

Precipitation reactions are those in which two aqueous solutions, which are known as reactants, create an insoluble solid product, known as a precipitate.

The pair of aqueous solutions that will produce a precipitate when mixed is: K2CO3, HNO3

In this pair of aqueous solutions, the potassium carbonate (K2CO3) is an ionic compound with a metal and non-metal.

When potassium carbonate is dissolved in water, it dissociates into K+ and CO3^2- ions.

Nitric acid (HNO3) is an aqueous solution of hydrogen ions and nitrate ions. These two solutions will react to form a precipitate of potassium nitrate (KNO3).

Here's the chemical equation for this precipitation reaction: K2CO3 (aq) + 2HNO3 (aq) → 2KNO3 (aq) + H2O (l) + CO2 (g)

To know more about precipitate, refer here:

https://brainly.com/question/29762381#

#SPJ11

Does electronegativity increase as atomic radius increases?

Answers

Actually, when atomic radius grows, electronegativity often decreases.

The capacity of an atom to draw electrons into a chemical connection is known as electronegativity. The separation between the nucleus and the farthest electrons grows with increasing atomic radius. As a result, the nucleus's attraction to the electrons is reduced, making it more challenging for the atom to draw electrons to itself. The electronegativity values of bigger atoms are therefore often lower than those of smaller ones. Despite this general tendency, there are certain outliers since electronegativity also depends on other elements including nuclear charge and electron configuration. For instance, the rising nuclear charge in halogens causes the electronegativity to rise as the atomic radius falls.

learn more about electronegativity here:

https://brainly.com/question/17762711

#SPJ4

determine the ka value for an acid where a 0.22 m solution has a measured ph of 2.98. enter your answer in scientific notation with two significant figures.

Answers

The Ka value is 2.2x10⁻³ in scientific notation with two significant figures.

To explain in brief, Ka is the acid dissociation constant that measures the strength of an acid.

The formula is used to find the value of the Ka constant when we have the molar concentration and the pH of the solution.

The calculation is done as follows:

Ka = [H₃O⁺]² / [HA]

Here, H₃O⁺ is the hydronium ion, which is formed when an acid is dissolved in water, and HA represents the acid.

Therefore, in order to determine the Ka value, we need to find the concentration of H₃O⁺ ions in the given solution.

Since pH = - log[H₃O⁺],

we can calculate [H₃O⁺] as follows:

2.98 = -log[H₃O⁺] = 10⁻²⁹⁵ = 1.28 × 10⁻³ M

Now, we can use the formula to find Ka:

Ka = [H₃O⁺]² / [HA]

= (1.28 × 10⁻³))² / 0.22

= 2.2 × 10⁻⁵

Therefore, the Ka value for the given acid is 2.2 × 10⁻⁵.

Learn more about dissociation constants here:

https://brainly.com/question/30930515

#SPJ11

Which of the following is not a characteristic of rivers and streams?
a.
vary in size
b.
mainly saltwater
c.
part of the water cycle
d.
flow toward other bodies of water


Please select the best answer from the choices provided

A
B
C
D

Answers

Answer:

b. mainly saltwater

Explanation:

The characteristic that is not true for rivers and streams is option b - mainly saltwater. Rivers and streams are freshwater bodies of water that flow from higher elevations to lower elevations, and eventually empty into larger bodies of water such as lakes, oceans, or other rivers. They are a vital component of the water cycle, and can vary in size from small streams to large rivers that span entire continents.

Answer:

B

Explanation:

Saltwater is not a characteristic of rivers and streams. Rivers and streams are typically freshwater systems, with only a few exceptions where they may be brackish or slightly salty due to their proximity to the ocean or underground salt deposits.

A refrigeration system reaches operational balance when the number of vapor molecules that condense into liquid equals the number of vapor molecules that the compressor pumps into the condenser.
a. True
b. False

Answers

In refrigeration, the refrigerant is a substance that absorbs heat from the surrounding and dissipates it to produce cooling. The correct option is a. True.

What is thermal balance?

The thermal balance in a refrigeration system is achieved when the system has reached a stable state, that is, the amount of heat absorbed by the refrigerant is equal to the heat rejected by the refrigeration system. During the compression process, the refrigerant is compressed and pumped into the condenser where it undergoes condensation, i.e., it changes from a gas to a liquid by releasing heat.

In the condenser, the refrigerant rejects the heat that it absorbed in the evaporator and releases it to the surrounding. The condensation process reduces the number of vapor molecules in the refrigerant, which leads to an increase in the number of liquid molecules.

Therefore, the number of vapor molecules that condense into liquid equals the number of vapor molecules that the compressor pumps into the condenser. This is because the compressor has to maintain a constant flow of refrigerant in the refrigeration system to achieve thermal balance.

Hence, the statement is a) true.

To know more about Thermal balance:

brainly.com/question/16749661

#SPJ11

Other Questions
Which text feature would best show the attendance rate at Malala's school from previous years compared to 2009 when it decreased by more than 60%?Question 5 options:Bar graphPhotographIndexCaption What does it mean to diversify the economy? Howwould diversifying the economy benefit the UAE? Isit beneficial for all? Who is being left out? when unaudited financial statements are presented in comparative form with audited financial statements in a document filed with the securities and exchange commission, such statements should be I NEED HELP ON THIS ASAP!! An unbalanced force is applied to accelerate the object to a final kinetic energy of 400.0 J. What is the change in the object's speed? In which phase of Design Thinking would a designer learn more about the user and their problems, wants, and needs? Ty worked 5 nights this week at an ice cream shop. He earned $23, $29, $25, and $16 in tips. The average amount he earned in tips for the 5 nights was $22. Is the amount he earned in tips on night 5 more or less than the average amount? Select the correct answer and explanation. 2.4 Analyse the impact of gender roles in societies and how they influence the inequalities in relationships and the general well-being of an individual. (3x2) 3. Issues in trade liberalization and WTO policiesIndicate whether each scenario in the following table represents a retaliatory tariff, a safeguard, or an environmental issue.ScenarioRetaliatory TariffSafeguardEnvironmental IssueThe United States bans imports of tuna from Mexico that is caught in ways that drown dolphins.The European Union imposes a 5% tariff on paper exports from a country that has violated WTO agreements.The United States imposes higher tariffs on the import of porcelain-on-steel cookware for four years to give domestic producers time to adjust to import competition.Which of the following arguments can be used to correctly defend the WTOs position on emergency protection from imports? Check all that apply.Safeguards can be used to nourish the domestic industry.Developing countries benefit from lifting the trade barriers.Safeguards are a political necessity for the formation of trade liberalization policies. Given, y=a(x2)(x+4)In the quadratic equation above, a is a nonzero constant. The graph of the equation in the xy-plane is a parabola with vertex (c,d). Which of the following is equal to d?A. -9aB. -8aC. -5aD. -2a A woman's baby is HIV positive at birth. She asks the nurse if this means the baby will develop AIDS. Which statement would be the nurse's best answer?A. "she already has AIDS. that's what being HIV positive means"B. "the antibodies may be those transferred across the placenta; the baby may not develop AIDS"C. "HIV is transmitted at birth; having a cesarean birth prevented transmission"D. "HIV antibodies do not cross the placenta; this means the baby will develop AIDS" 3 situation where Daisy Buchanan is arrogant and why explain why the ph of 0.1 m ethanol is higher than the ph of 0.1 m acetic acid. draw structures to support your explanation. Firms do not compete only against global competitors, but against:A) their suppliers.B) themselves.C) the customers of their competitors.D) their competitors' supply chains. 1. Study Question #1 Ch 8. Evaluate the following statement. True or False: Trade liberalization has assumed two main forms. One involves the reciprocal reduction of trade barriers on a nondiscriminatory basis. as seen in the operation of the World Trade Organization. The other approach involves the establishment by a group of nations of regional trading arrangements among themselves. The European Union and the North American Free Trade Agreement are examples of regional trading arrangements. True O False Grade it Now Save &. Continue Continue without saving Drag the appropriate answer from thechoices given into the box provided.A function is graphed on thecoordinate grid. The output for the function when the input is -1 is? prepare the year-end statement of revenues, expenditures, and changes in fund balances for the capital projects fund. prepare the year-end balance sheet. assume that all fund balances are restricted. has the capital project been completed? Which of the following statements best predicts the result of a comparison between the fossils found before and after the period of rapid change? Most of the species found in the first static period will be absent in the second static period. Paul borrowed $6,000 from a credit union for 5 years and was charged simple interest at a rate of 5.45%. What is the amount of interest he paid at the end of the loan? Select all of the following that are linear functions. x = 5y-24012-2. 45x + 7 = 4y