an automobile engine provides 621 joules of work to push the pistons and generates 2150 joules of heat that must be carried away by the cooling system.
Calculate the change in the internal energy of the engine.

We need 128.04 grams of Al2(SO4)3.18H2O to make 800 mL of a 0.300 M solution. Given that the volume of the solution (V) = 800 mL = 0.8 L

The molarity of the solution (M) = 0.300 M

We have to find out the mass of the compound Al2(SO4)3.18H2O required to make the solution.

To find the mass, we need to use the formula:

mass = molarity x molar mass x volume

Here, the molar mass of Al2(SO4)3.18

H2O = 666.39 g/mol (sum of the atomic weights of Al, S, O, and H)

Let the mass of the compound be x grams. Substituting the given values in the above formula:

mass = 0.300 x 666.39 x 0.8

= 160.05 x 0.8

= 128.04 g

To leran more about molarity, refer:-

https://brainly.com/question/30909953

#SPJ11

The pH of the 0.0490 M solution is 11.097, the percent ionization of the acid is approximately 2.55%, and the Ka value of the acid is 1.22×10-5.

To calculate the pH of the solution, we first need to find the pOH using the equation:

pOH = -log[H⁺]
pOH = -log[1.25×10-3]
pOH = 2.903

Next, we can use the equation:

pH + pOH = 14

to find the pH:

pH = 14 - pOH
pH = 14 - 2.903
pH = 11.097

The percent ionization of the acid can be calculated using the equation:

% ionization = [H⁺] / [HA] x 100%

where [H⁺] is the concentration of the hydrogen ion and [HA] is the initial concentration of the acid. We know that the concentration of the acid is 0.0490 M, so:

% ionization = [H⁺] / [HA] x 100%
% ionization = 1.25×10-3 / 0.0490 x 100%
% ionization = 2.55%

To calculate the Ka value of the acid, we can use the equation:

Ka = [H⁺][A⁻] / [HA]

where [H⁺] is the concentration of the hydrogen ion, [A⁻] is the concentration of the conjugate base, and [HA] is the initial concentration of the acid. We know that the concentration of the acid is 0.0490 M and that the percent ionization is 2.55%, so the concentration of the hydrogen ion is:

[H⁺] = 2.55% x 0.0490 M
[H⁺] = 1.25×10-3 M

The concentration of the conjugate base can be calculated using the equation:

[A⁻] = [HA] - [H⁺]
[A⁻] = 0.0490 - 1.25×10-3
[A⁻] = 0.0478 M

Now we can plug in these values to find the Ka value:

Ka = [H⁺][A⁻] / [HA]
Ka = (1.25×10-3)(0.0478) / 0.0490
Ka = 1.22×10-5

Therefore, the pH of the solution is 11.097, the percent ionization of the acid is 2.55%, and the Ka value of the acid is 1.22×10-5.

Learn more about percent ionization at https://brainly.com/question/14225136

#SPJ11

In the given cell, the EMF of the concentration is approximately 0.0294 volts.

To calculate the EMF of the given concentration cell, you can use the Nernst equation: E_cell = E° - (RT/nF) * ln(Q). In this cell, Mg2+ ions are in equilibrium with solid Mg at both electrodes, so E° = 0.

Temperature (T) is assumed to be 298K, R = 8.314 J/(mol*K), n = 2 (for Mg2+), and F = 96485 C/mol.

The reaction quotient (Q) is [Mg2+]_cathode / [Mg2+]_anode = 0.50M / 0.19M.

Plugging in the values, we get E_cell = 0 - (8.314 * 298 / (2 * 96485)) * ln(0.50 / 0.19). Solving this, E_cell ≈ 0.0294 V. So, the EMF of the concentration cell is approximately 0.0294 volts.

More on EMF: https://brainly.com/question/31799636

#SPJ11

The emf (or cell potential) of the concentration cell is -2.383 V.

The emf (electromotive force) of a concentration cell can be calculated using the Nernst equation:

Ecell = E°cell - (RT/nF) x ln(Q)

where:

In this case, the cell consists of two half-cells, with one containing a magnesium electrode in contact with a 0.50 M solution of Mg₂+ ions, and the other containing a magnesium electrode in contact with a 0.19 M solution of Mg₂+ ions.

The balanced redox reaction for the cell is:

Mg(s) + Mg₂+(0.19 M) → Mg₂+(0.50 M) + Mg(s)

which involves the transfer of two electrons. The standard reduction potential for this half-reaction is -2.37 V.

Using the Nernst equation and plugging in the given values, we get:

Therefore, the emf (or cell potential) of the concentration cell is -2.383 V.

Learn more about emf

brainly.com/question/15121836

#SPJ11

The redox reaction is represented by the cell notation: Mg(s) ∣ Mg₂⁺(aq) || Cu₂⁺(aq) ∣ Cu(s) is Mg(s) + Cu₂⁺(aq) → Cu(s) + Mg₂⁺(aq) (Option B)

The notation ∣ represents a phase boundary and || represents a salt bridge. The half-reactions occurring at each electrode are:

At the anode (left side of the cell notation): Mg(s) → Mg₂⁺(aq) + 2 e⁻ (oxidation)

At the cathode (right side of the cell notation): Cu₂⁺(aq) + 2 e⁻ → Cu(s) (reduction)

The overall reaction can be obtained by adding these two half-reactions and canceling out the electrons:

Mg(s) + Cu₂⁺(aq) → Cu(s) + Mg₂⁺(aq)

Thus, the correct option is B.

Learn more about redox reaction: https://brainly.com/question/28300253

#SPJ11

When dissolved in water, Ca(OH)2 and KOH are bases. HClO4 and HI are acids. The  correct option is (1).

A substance is classified as a base if it accepts protons (H+) when dissolved in water. Ca(OH)2 and KOH both contain hydroxide ions (OH-) that readily accept protons from water, making them bases. On the other hand, HClO4 and HI are both acids.

HClO4 is a strong acid, meaning that it dissociates completely in water, releasing H+ ions. HI is also an acid, as it contains hydrogen ions that are readily released in water.

The basicity or acidity of a substance is determined by its ability to donate or accept protons in a solution. The pH scale, which ranges from 0 to 14, measures the acidity or basicity of a solution.

A pH value below 7 indicates acidity, while a pH above 7 indicates basicity. The neutrality point is pH 7, which corresponds to a solution with an equal concentration of H+ and OH- ions.

To know more about "Basicity" refer here:

https://brainly.com/question/32036292#

#SPJ11

Hydrogen and oxygen atoms combine through covalent bonding to achieve a stable electron configuration similar to their nearest noble gas.

In a water molecule (H2O), one oxygen atom shares electrons with two hydrogen atoms through covalent bonds. Each hydrogen atom contributes one electron, while the oxygen atom contributes six electrons (two from its own valence shell and four from the shared bonds).

This arrangement allows the oxygen atom to have a total of eight valence electrons, achieving a stable electron configuration similar to the noble gas neon (Ne).

By sharing electrons, hydrogen and oxygen atoms fill their valence shells and attain a stable electron configuration. This stability is achieved by following the octet rule, which states that atoms tend to gain, lose, or share electrons to acquire a full set of eight valence electrons, resembling the electron configuration of noble gases.

In the case of water, the covalent bonding allows both hydrogen and oxygen to achieve this stable electron configuration, resulting in a stable and commonly found compound in nature.

To learn more about electron configuration click here

brainly.com/question/29157546

#SPJ11

The rate constant of the reaction was determined to be approximately 0.1112 m/s.

To calculate the rate constant, we need to use the rate equation and the initial concentrations of the reactants.

The rate equation for the reaction is given by Rate = k[A]^m[B]^n, where k is the rate constant, [A] and [B] are the concentrations of reactants A and B, and m and n are the reaction orders with respect to A and B, respectively.

Analyzing the given data, we can determine the reaction orders.

By comparing the rates of different trials, we find that the reaction is first order with respect to reactant A and first order with respect to reactant B.

Using Trial 1, we can set up the rate equation as:

Rate1 = k[A]1^1[B]1^1

0.0198 = k(0.310)(0.240)

Solving this equation, we find that k ≈ 0.1112. Therefore, the rate constant for the reaction is approximately 0.1112 m/s.

The rate constant represents the proportionality constant between the concentrations of reactants and the rate of the reaction.

It indicates how quickly the reaction proceeds at a particular temperature. In this case, the rate constant value of 0.1112 m/s suggests that the reaction proceeds at a moderate rate.

The specific units of the rate constant depend on the overall order of the reaction, which can be determined by summing the individual reaction orders for each reactant.

Learn more about rate constant here:

https://brainly.com/question/20305922

#SPJ11

The chemist determines that 0.0200 moles of fluorine gas participate in a chemical reaction.

Moles are a unit of measurement used in chemistry to express the amount of a substance. In this case, the chemist has determined that 0.0200 moles of fluorine gas are involved in a chemical reaction. This measurement tells us the quantity of fluorine gas involved, but it doesn't provide any information about the reaction itself or the other substances involved. The moles of a substance can be used to determine various properties, such as the mass of the substance or the stoichiometry of a reaction. By knowing the number of moles, chemists can perform calculations to determine the amounts of other substances involved or to determine the yield of a reaction.

To learn more about  fluorine gas click here

brainly.com/question/29802537

#SPJ11

Rayleigh and Raman scattering are two types of scattering of photons that occur when light interacts with matter. In Rayleigh scattering, the incident photons interact with molecules or atoms in the medium and are scattered in all directions, with the bulk of scattered photons having the same energy and wavelength as the incident photons.

This process is elastic and the scattered and incident photons have the same energy and wavelength. On the other hand, in Raman scattering, a small fraction of the incident photons interacts with the molecules or atoms in the medium and undergo a change in energy and wavelength, resulting in the scattered photons having different energy and wavelength than the incident photons. This process is inelastic and typically has a weaker intensity compared to Rayleigh scattering.

The timescale for scattering is much faster than that for fluorescence. Scattering occurs on the timescale of 10^15 to 10^17 seconds, while fluorescence occurs on the timescale of 10^7 to 10^11 seconds. This is because scattering involves the interaction of photons with the medium and does not involve the excitation and de-excitation of electrons, which is the process responsible for fluorescence. As a result, scattering occurs much more rapidly than fluorescence.

In summary, Rayleigh and Raman scattering are two types of scattering of photons that occur when light interacts with matter. Rayleigh scattering is elastic and results in the bulk of scattered photons having the same energy and wavelength as the incident photons, while Raman scattering is inelastic and results in a small fraction of scattered photons having different energy and wavelength than the incident photons. The timescale for scattering is much faster than that for fluorescence, as scattering does not involve the excitation and de-excitation of electrons.

To know more about Rayleigh and Raman click here:

https://brainly.com/question/30694232

#SPJ11

The 1H NMR spectrum of (CH3)3CCHO is expected to show one signal, a singlet, with a relative area of 9.

The 1H NMR spectrum of (CH3)3CCHO, also known as tert-butyl acetaldehyde, is expected to display a single signal, appearing as a singlet peak. This is because all nine hydrogen atoms in the molecule are identical and experience the same chemical environment.

As a result, there are no neighboring hydrogen atoms to cause splitting of the signal. The relative area of the singlet peak will be 9, representing the ratio of the number of equivalent hydrogen atoms in the compound.

In summary, the 1H NMR spectrum of (CH3)3CCHO exhibits a single, unsplit signal with a relative area of 9, indicating the presence of nine equivalent hydrogen atoms in the molecule.

Learn more about atoms

brainly.com/question/31086638

#SPJ11

No, pH strips cannot be used to detect carbohydrate digestion.

Carbohydrate digestion involves the breakdown of complex carbohydrates into simple sugars, which does not directly affect the pH level.

pH strips can be used to detect the acidity or alkalinity of the environment in which digestion is taking place, which can indirectly indicate the presence of digestive enzymes and the effectiveness of the digestion process.

pH strips can be used to monitor the pH level of the digestive environment, which could provide indirect information about the digestive process in general.

Learn more about carbohydrates here,

https://brainly.com/question/3573038

#SPJ11

Total heat load represents the amount of heat that a commercial refrigeration system must remove in a given period, which can vary depending on the specific needs of the business or facility.

The heat load can be influenced by factors such as the size of the refrigerated space, the type of products being stored, the ambient temperature and humidity levels, and the frequency of door openings. It is important to accurately calculate the total heat load in order to select the appropriate refrigeration system and ensure efficient operation. Failure to remove the required amount of heat can lead to equipment failure, increased energy costs, and compromised product quality. Factors that can increase the total heat load include poor insulation, inefficient lighting, and improper ventilation. On the other hand, reducing the heat load can be achieved through measures such as installing high-efficiency lighting and motors, improving insulation, and using proper ventilation. By understanding and managing the total heat load, businesses can ensure effective and efficient operation of their refrigeration systems, leading to cost savings and improved product quality.

learn more about heat

https://brainly.com/question/28876605

#SPJ11

The energy required to ionize a hydrogen atom in its fifth excited state can be calculated using the Rydberg formula, which relates the energy of a photon emitted or absorbed during a transition in hydrogen to the energy levels involved.

The energy required to ionize a hydrogen atom from its nth excited state to infinity is given by:

E = -R_H/n^2

where R_H is the Rydberg constant for hydrogen (2.18 x 10^-18 J), and n is the principal quantum number of the excited state. For n = 5, the energy required to ionize the hydrogen atom is:

E = -2.18 x 10^-18 J / 5^2 = -8.72 x 10^-20 J

The negative sign indicates that energy must be supplied to the system to ionize the atom. Thus, it takes 8.72 x 10^-20 joules of energy to ionize a hydrogen atom in its fifth excited state.

Learn more about  ionize a hydrogen here;

https://brainly.com/question/28529640

#SPJ11

We must apply the Nernst equation in order to determine the voltage of the specified cell. Cell notation is as follows:As a result, the cell's voltage at 25°C is 0.43 V.

Cu2+ (0.10 M) | Zn | Zn2+ (0.20 M) | Cu

Writing down the half-cell responses comes first

Zn oxidises to Zn2+ + 2e-

Cu (reduction) = Cu2+ + 2e-

For these half-cell processes, the typical reduction potentials are:

Zn2+/Zn = E°(-0.76 V)

Cu2+/Cu2+ E° = +0.34 V

The cell potential at 25°C can be calculated using the Nernst equation:

E = E° - ln(Q)(RT/nF)

Where n is the number of electrons exchanged (2 in this case), R is the gas constant (8.314 J/mol K), T is the temperature in Kelvin (298 K), F is the Faraday constant (96485 C/mol), and Q is the reaction quotient.

You may write the reaction quotient as:

Q = [Cu2+] / [Zn2+]

When we change the values, we obtain:

E = 0.34 - (8.314*298/2*96485) ln(0.10/0.20) = 0.43 V

For more such questions on Nernst equation

https://brainly.com/question/31968419

#SPJ11

To calculate the voltage of the cell, we need to use the standard reduction potentials for the half-reactions and the Nernst equation to account for the non-standard concentrations:

Zn2+ + 2 e- ⇌ Zn, E° = -0.76 V

Cu2+ + 2 e- ⇌ Cu, E° = +0.34 V

The overall reaction for the cell is:

Zn + Cu2+ ⇌ Zn2+ + Cu

The cell voltage is given by:

Ecell = Ecathode - Eanode

Ecell = E°Cu - E°Zn - (RT / (nF))ln(Q)

where:

R is the gas constant (8.314 J/mol*K)

T is the temperature in Kelvin (25°C = 298 K)

n is the number of electrons transferred in the balanced equation (2)

F is the Faraday constant (96,485 C/mol)

Q is the reaction quotient, which is calculated from the concentrations of the species involved in the half-reactions.

Since the zinc electrode is the anode, we will use the reduction potential for the Zn half-reaction as a negative value:

Ecell = +0.34 V - (-0.76 V) - (RT / (2F))ln(Q)

We can simplify this to:

Ecell = +1.10 V - (RT / (2F))ln(Q)

To find Q, we need to use the concentrations given:

[Zn2+] = 0.20 M

[Cu2+] = 0.10 M

[Zn2+][Cu] / [Zn][Cu2+] = (0.20)(1) / (1)(0.10) = 2.00

Now we can substitute the values into the equation for Ecell:

Ecell = +1.10 V - (8.314 J/mol*K)(298 K) / (2)(96,485 C/mol) ln(2.00)

Ecell = +1.10 V - 0.0229 V

Ecell = +1.0771 V

Therefore, the voltage of the cell at 25°C is approximately +1.0771 V.

Learn more about voltage of the cell here:

https://brainly.com/question/894108

#SPJ11

a.) The grams of C, H, and O in the original sample are approximately:

C: 6.375 g

H: 0.535 g

O: 16.976 g

b.) The empirical formula of the compound is CH₂O.

We need to calculate the moles of CO₂ and H₂O produced to determine the grams of carbon (C), hydrogen (H), and oxygen (O) in the original sample.

Calculation of grams of C, H, and O in the original sample:

Given:

Mass of CO₂ = 23.358 g

Mass of H₂O = 4.7808 g

Molar mass of the compound = 162.19 g/mol

1. Calculate moles of CO₂:

Molar mass of CO₂ = 12.01 g/mol (C) + 2 × 16.00 g/mol (O) = 44.01 g/mol

Moles of CO₂ = Mass of CO₂ / Molar mass of CO₂ = 23.358 g / 44.01 g/mol = 0.5306 mol CO₂

From the balanced equation of combustion, we know that one mole of CO₂ is produced from one mole of carbon (C) in the original compound. Therefore, the moles of C in the original sample is also 0.5306 mol.

2. Calculate moles of H₂O:

Molar mass of H₂O = 2 × 1.01 g/mol (H) + 16.00 g/mol (O) = 18.02 g/mol

Moles of H₂O = Mass of H₂O / Molar mass of H₂O = 4.7808 g / 18.02 g/mol = 0.2652 mol H₂O

From the balanced equation of combustion, we know that one mole of H₂O is produced from two moles of hydrogen (H) in the original compound. Therefore, the moles of H in the original sample is 0.2652 mol × 2 = 0.5304 mol.

3. Calculate moles of O in the original sample:

Moles of O = Moles of CO₂ + Moles of H₂O = 0.5306 mol + 0.5304 mol = 1.061 mol O

4. Calculate grams of C, H, and O in the original sample:

Grams of C = Moles of C × Molar mass of C = 0.5306 mol × 12.01 g/mol = 6.375 g

Grams of H = Moles of H × Molar mass of H = 0.5304 mol × 1.01 g/mol = 0.535 g

Grams of O = Moles of O × Molar mass of O = 1.061 mol × 16.00 g/mol = 16.976 g

Therefore, the grams of C, H, and O in the original sample are approximately:

C: 6.375 g

H: 0.535 g

O: 16.976 g

To determine the empirical formula, we need to find the simplest whole number ratio of C, H, and O atoms.

Dividing the grams of C, H, and O by their respective molar masses gives the number of moles of each element:

Moles of C = 6.375 g / 12.01 g/mol = 0.531 mol

Moles of H = 0.535 g / 1.01 g/mol = 0.530 mol

Moles of O = 16.976 g / 16.00 g/mol = 1.061 mol

Next, we divide the moles of each element by the smallest number of moles (in this case, moles of H) to find the the mole ratio:

Moles of C / Moles of H = 0.531 mol / 0.530 mol ≈ 1

Moles of H / Moles of H = 0.530 mol / 0.530 mol = 1

Moles of O / Moles of H = 1.061 mol / 0.530 mol ≈ 2

The approximate ratio of C:H:O is 1:1:2. Therefore, the empirical formula of the compound is CH₂O.

Learn more about moles.

brainly.com/question/30885025

#SPJ11

(i) The balanced chemical equation for the reaction is:

[tex]2HCl + CaCO_3 = CaCl_2 + H_2O + CO_2[/tex]

(ii) The molar mass of [tex]CO_2[/tex] is 44.01 g/mol, so the theoretical yield of [tex]CO_2[/tex] in grams is 5.28 g [tex]CO_2[/tex]

(iii) The percent yield of [tex]CO_2[/tex] is 47.3%.

(i) The balanced chemical equation for the reaction is:

[tex]2HCl + CaCO_3 = CaCl_2 + H_2O + CO_2[/tex]

(ii) To calculate the theoretical yield of [tex]CO_2[/tex], we first need to determine the limiting reagent.

The molar mass of HCl is 36.5 g/mol, so 4.5 g of HCl corresponds to 0.123 mol:

4.5 g HCl x (1 mol HCl/36.5 g HCl) = 0.123 mol HCl

The molar mass of [tex]CaCO_3[/tex] is 100.1 g/mol, so 12 g of [tex]CaCO_3[/tex] corresponds to 0.12 mol:

12 g [tex]CaCO_3[/tex]  x (1 mol [tex]CaCO_3[/tex]/100.1 g [tex]CaCO_3[/tex] ) = 0.12 mol [tex]CaCO_3[/tex]

The balanced equation shows that 1 mol of [tex]CaCO_3[/tex] produces 1 mol of [tex]CO_2[/tex] . Therefore, since [tex]CaCO_3[/tex] is limiting, the theoretical yield of [tex]CO_2[/tex] is 0.12 mol.

The molar mass of [tex]CO_2[/tex] is 44.01 g/mol, so the theoretical yield of [tex]CO_2[/tex] in grams is:

0.12 mol [tex]CO_2[/tex] x (44.01 g [tex]CO_2[/tex] /mol) = 5.28 g [tex]CO_2[/tex]

(iii) The percent yield of [tex]CO_2[/tex] is calculated using the actual yield (2.5 g) and the theoretical yield (5.28 g) as follows:

Percent yield = (actual yield / theoretical yield) x 100%

Percent yield = (2.5 g / 5.28 g) x 100%

Percent yield = 47.3%

For more question on balanced chemical equation click on

https://brainly.com/question/11904811

#SPJ11

The ∆godiss for acetic acid and monochloroacetic acid is determined by both the enthalpy and entropy contribution.

The enthalpy (∆H) contribution to ∆godiss is due to the energy absorbed or released during the breaking or forming of bonds between the molecules. The entropy (∆S) contribution is due to the degree of randomness or disorder in the system.

For acetic acid, the enthalpy contribution to ∆godiss is negative due to the release of energy during the formation of the hydrogen bond between the carboxyl group and the hydroxyl group. The entropy contribution is also negative due to the decrease in the degree of randomness when the molecules come together to form a solid.

For monochloroacetic acid, the enthalpy contribution is also negative due to the formation of the hydrogen bond and the dipole-dipole interaction between the chlorine atom and the carbonyl group. However, the entropy contribution

To know more about monochloroacetic acid refer here:

https://brainly.com/question/31761018#

#SPJ11

SiO2 is a molecule made up of one silicon atom and two oxygen atoms. The molecular geometry of SiO2 can be determined using the VSEPR theory, which predicts that the electron pairs around the central atom will arrange themselves in a way that maximizes the distance between them.

The first step is to draw the Lewis structure of the molecule. The Si atom is the central atom with two double bonds to the O atoms. This means there are no lone pairs on the central Si atom.

Using the Lewis structure, we can see that SiO2 has a bent molecular geometry. This is because the two oxygen atoms are bonded to the silicon atom in a linear arrangement, but the arrangement is bent due to the repulsion of the two oxygen atoms. The molecule also has a tetrahedral electron geometry, which means that the Si atom has four electron domains.

In terms of bond angles, the Si-O-Si bond angle is approximately 143 degrees, which is close to the tetrahedral angle of 109.5 degrees. This indicates that the molecule has some trigonal planar character. The O-Si-O bond angle is approximately 180 degrees, which indicates a linear arrangement.

Finally, the molecule also has some trigonal pyramidal character due to the lone pairs on the oxygen atoms. Overall, the molecular geometry of SiO2 can be described as bent with tetrahedral electron geometry, some trigonal planar and linear character, and some trigonal pyramidal character.

To know more about molecular geometry click here:

https://brainly.com/question/7558603

#SPJ11

The three states of matter, ranked from the most ordered to the most disordered, are: solid, liquid, and gas.

In a solid, particles are arranged in a fixed and orderly pattern, making it the most ordered state of matter. Liquids have more molecular disorder than solids, as particles are more randomly arranged and can flow past one another. Finally, gases are the most disordered state of matter, with particles moving freely and occupying any available space.

Solids have a definite shape and volume due to the strong intermolecular forces holding the particles in place. As energy is added and the temperature increases, these forces weaken, causing the particles to vibrate more rapidly and transition into the liquid state. Liquids have a definite volume but take the shape of their container, with particles being able to move past each other more freely. Further energy input causes the liquid to become a gas, in which the particles are widely spaced and can move rapidly in all directions. Gases have no fixed shape or volume and will expand to fill their container.

In summary, the order of increasing molecular disorder for the three states of matter is: solid (most ordered), liquid, and gas (most disordered).

Know more about Molecular Disorder here:

https://brainly.com/question/31475993

#SPJ11

The inert component of the Standard Hydrogen Electrode (SHE) is platinum metal.

So, the correct answer is C.

The SHE is a reference electrode that is used to measure the potential of other electrodes in electrochemical cells. The platinum metal serves as a catalyst for the reduction of hydrogen ions in the half-reaction at the electrode.

The half-reaction involves the reduction of hydrogen ions to hydrogen gas, which is why hydrogen gas is also present in the electrode. However, the hydrogen gas is not the inert component, as it is directly involved in the reaction. The presence of platinum metal ensures that the reduction of hydrogen ions occurs efficiently and reproducibly, making it an important component of the SHE.

Hence, the answer of the question is C.

Learn more about SHE at https://brainly.com/question/31597945

#SPJ11

Answer:

Platinum metal

Explanation:

In the SHE, elemental platinum (a transition metal) is used as a reactive surface; it does not actually participate in a redox reaction in the cell.

Claire is buying shoes at a store with a 35% discount. To find the discount amount, a proportion can be set up. With the additional 7.5% sales tax, the final cost of the shoes can be calculated. Claire's cousin, Sara, found the same shoes at a 40% discount with a 5% sales tax. The one who paid the lower total cost can be determined by comparing the final costs.

To find the dollar amount of the discount (d) for the shoes Claire is buying, a proportion can be set up using the discount rate of 35%. The proportion can be written as (d/$64.99) = (35/100). Solving this proportion will give the discount amount.

Next, to calculate the final cost of the shoes Claire buys, the sales tax of 7.5% needs to be considered. The final cost can be determined by adding the discounted price (original price - discount) and the sales tax amount (sales tax rate * discounted price).

Regarding Sara, she found the same pair of shoes at a 40% discount from a regular price of $67.00. To compare the total costs, the same process as above needs to be followed, considering Sara's 5% sales tax rate. The final costs for both Claire and Sara can be calculated, and by comparing the totals, it can be determined who paid the lower amount.

To learn more about sales tax, click here:

brainly.com/question/29751934

#SPJ11

Sodium carbonate can be expressed as Na+ and CO3 2-, while zinc sulfate can be expressed as Zn2+ and SO4 2-.

Sodium carbonate (Na2CO3) and zinc sulfate (ZnSO4) can be expressed as ions as follows:
Sodium carbonate dissociates into 2 sodium ions (Na+) and 1 carbonate ion (CO3²⁻).
Zinc sulfate dissociates into 1 zinc ion (Zn²⁺) and 1 sulfate ion (SO4²⁻).
Sodium carbonate can be expressed as the ions Na+ (sodium cation) and CO3 2- (carbonate anion). Zinc sulfate can be expressed as the ions Zn2+ (zinc cation) and SO4 2- (sulfate anion). Therefore, the ionic forms of sodium carbonate and zinc sulfate are Na2CO3 and ZnSO4, respectively. Both sodium carbonate and zinc sulfate are important industrial chemicals with a wide range of applications in various fields. Understanding their chemical properties and behaviors is important for their safe handling and effective use in different applications.

To know more about Sodium visit :-

https://brainly.com/question/8877951

#SPJ11

The final temperature of the air after compression is approximately 552.67 K.

To determine the final temperature of the air when it is compressed in a car engine from 22 °C and 95 kPa in a reversible and adiabatic manner with a compression ratio [tex]V_1/V_2[/tex]of 8, we need to consider the following assumptions:

1. The compression process is reversible and adiabatic. This means there is no heat transfer to or from the system and the process is carried out with no entropy generation.
2. The air is an ideal gas. This implies that the air obeys the ideal gas law (PV = nRT) and its properties depend only on temperature.
3. The specific heat capacities of air (cv,air and cp,air) and the adiabatic index (kair) are constant during the compression process.
4. The molar mass of air (Mair) is provided and constant.

Given the information and assumptions, we can use the adiabatic relation for ideal gases to calculate the final temperature ( [tex]T_2[/tex]) of the air:

[tex]T_2[/tex] =  [tex]T_1[/tex] ×[tex](V_1/V_2)^(k_a_i_r_ -_1)[/tex]
Where:
[tex]T_1[/tex] = Initial temperature = 22 °C = 295.15 K (converting to Kelvin)
[tex]V_1/V_2[/tex]= Compression ratio = 8
kair = Adiabatic index = 1.4

Now, calculate [tex]T_2[/tex]:

[tex]T_2[/tex] = 295.15 × [tex](8)^(^1^.^4 ^- ^1^)[/tex]
[tex]T_2[/tex] = 295.15×[tex](8)^0^.^4[/tex]
[tex]T_2[/tex] ≈ 552.67 K

Therefore, The final temperature of the air after compression is approximately 552.67 K.

To know more about Air refer here :

https://brainly.com/question/568323

#SPJ11

The density of the metal is 8.94 g/cm³.

To find the density of the metal, we need to calculate its atomic/molar mass. We are given the formula weight (fw) which is 311.8 g/mol.

Since we don't know the element, we can't look up its atomic mass directly, but we can use the fw to approximate it.

The closest element to this fw is cobalt (Co), which has an atomic mass of 58.93 g/mol.

Therefore, we can assume that the metal is cobalt.

Next, we need to find the volume of the unit cell. The radius given is 2.86 angstrom, which we convert to cm (1 angstrom = 1x10⁻⁸ cm).

Therefore, the radius is 2.86x10⁻⁸cm.

The face-centered cubic unit cell has 4 atoms per unit cell, and each atom contributes 1/8 of its volume to the unit cell.

Using the formula for the volume of a sphere, we can find the volume of each atom and multiply by 4 and 1/8 to get the volume of the unit cell.

V_atom = (4/3)πr³ = (4/3)π(2.86x10⁻⁸ cm)³ = 9.76x10⁻²⁴ cm³

V_unit cell = 4 x 1/8 x V_atom = 1.22x10⁻²³ cm³

Finally, we can find the density by dividing the mass of the unit cell by its volume. density = fw/V_unit cell = 311.8 g/mol / 1.22x10⁻²³ cm³ = 8.94 g/cm³ (rounded to 2 decimal places)

Learn more about density at

https://brainly.com/question/29775886

#SPJ11

The identity of the unknown gas is option 2) [tex]CO_{2}[/tex] .

To identify the unknown gas, we need to use the ideal gas law, which states that:

PV = nRT

Where:

P is the pressure of the gas

V is the volume of the gas

n is the number of moles of the gas

R is the ideal gas constant

T is the temperature of the gas

At STP (Standard Temperature and Pressure), the pressure is 1 atm and the temperature is 273 K. Also, 1 mole of gas occupies 22.4 L at STP.

So, we can use the formula:

n = PV/RT = (1 atm x 28.5 L) / (0.0821 L atm/mol K x 273 K) = 1.14 mol

The molar mass of the unknown gas can be calculated by dividing the mass of the gas by the number of moles:

Molar mass = Mass / n = 55.92 g / 1.14 mol = 49.05 g/mol

Comparing this molar mass to the molar masses of the given gases, we can see that it is closest to [tex]N_{2}[/tex] (molar mass = 28 g/mol) and [tex]CO_{2}[/tex] (molar mass = 44 g/mol). However, [tex]N_{2}[/tex] has a molar mass that is too low, so the unknown gas must be [tex]CO_{2}[/tex].

Therefore, the identity of the unknown gas is option  2)[tex]CO_{2}[/tex].

Know more about   ideal gas law  here:

https://brainly.com/question/27870704

#SPJ11

A.)236 Np -> 236 U + α particle (alpha decay) B.)236 Np -> 236 Pu + β particle (beta decay) C.)236 Np + e- -> 236 Pa (electron capture)

Part A: The balanced nuclear equation for the decay of 236 Np by alpha emission is:

236 Np → 232 Th + 4 He

Part B: The balanced nuclear equation for the decay of 236 Np by beta emission is:

236 Np → 236 Pu + e- + νe

Part C: The balanced nuclear equation for the decay of 236 Np by electron capture is:

236 Np + e- → 236 Pa + νe

In electron capture, an electron is captured by the nucleus, and a neutron is converted into a proton. This results in the decrease of the atomic number by one and no change in the mass number. In beta decay, a neutron is converted into a proton and an electron is emitted.

The emitted electron is a beta particle, and it is accompanied by an antineutrino. This results in the increase of the atomic number by one and no change in the mass number.

In alpha decay, an alpha particle is emitted, which is a helium nucleus consisting of two protons and two neutrons. This results in the decrease of the atomic number by two and the mass number by four.

For more question on alpha decay visit:

https://brainly.com/question/17145324

#SPJ11

The balanced half-reactions for the electrodes on the left and right are

Ni(s) → Ni²⁺(aq) 2 e⁻ . (left) anode

Cu²⁺(aq) + 2 e⁻ → Cu(s) ( right) cathode

The overall reaction is given as :Ni(s) + Cu²⁺(aq) → Ni²⁺(aq) + Cu(s)

A voltaic cell is constructed with a Cu/Cu²⁺ half-cell and an Ni/Ni²⁺ half-cell. The nickel electrode is negative (anode) and the copper electrode is positive (cathode). In the anode takes place the oxidation and in the cathode takes place the reduction. The corresponding half-reactions are:

Anode (oxidation): Ni(s) → Ni²⁺(aq) 2 e⁻

Cathode (reduction): Cu²⁺(aq) + 2 e⁻ → Cu(s)

The overall  reaction is:

Ni(s) + Cu²⁺(aq) → Ni²⁺(aq) + Cu(s)

To know more about half reactions here

https://brainly.com/question/28380657

#SPJ4

The complete question is

A voltaic cell is constructed with a Cu/Cu2 half-cell and an Ni/Ni2 half-cell. what are the balanced half-reactions for the electrodes on the left and right? be sure to include states of matter.

There are several ways to prepare a base, also known as an alkaline solution, using balanced chemical equations. Here are five examples:

CaO + H2O → Ca(OH)2

NaOH + HCl → NaCl + H2O

K2CO3 + H2SO4 → K2SO4 + H2O + CO2

NH3 + H2O → NH4OH

2K + 2H2O → 2KOH + H2

Reaction between a metal oxide and water:

Metal oxide + water → metal hydroxide

For instance, when calcium oxide (CaO) reacts with water (H2O), it forms calcium hydroxide (Ca(OH)2):

CaO + H2O → Ca(OH)2

Reaction between a metal hydroxide and an acid:

Metal hydroxide + acid → salt + water

An example is the reaction between sodium hydroxide (NaOH) and hydrochloric acid (HCl), producing sodium chloride (NaCl) and water (H2O):

NaOH + HCl → NaCl + H2O

Reaction between a metal carbonate and an acid:

Metal carbonate + acid → salt + water + carbon dioxide

An example is the reaction between potassium carbonate (K2CO3) and sulfuric acid (H2SO4), resulting in potassium sulfate (K2SO4), water (H2O), and carbon dioxide (CO2):

K2CO3 + H2SO4 → K2SO4 + H2O + CO2

Reaction between ammonia gas and water:

Ammonia gas + water → ammonium hydroxide

When ammonia gas (NH3) dissolves in water (H2O), it forms ammonium hydroxide (NH4OH):

NH3 + H2O → NH4OH

Reaction between an alkali metal and water:

Alkali metal + water → metal hydroxide + hydrogen gas

For example, when potassium (K) reacts with water (H2O), it forms potassium hydroxide (KOH) and releases hydrogen gas (H2):

2K + 2H2O → 2KOH + H2

These are just a few examples of how bases can be prepared through chemical reactions.

For more such questions on base

https://brainly.com/question/13031875

#SPJ8

The L-aldohexose that gives the same alditol as glucose when treated with NaBH4 is galactose.

When an L-aldohexose is treated with sodium borohydride (NaBH4), it is reduced to form an alditol.

To determine which L-aldohexose will give the same alditol as another, we need to compare the structures of the alditols produced.

For example, if we treat glucose and mannose with NaBH4, we will obtain the corresponding alditols, glucoitol and mannoitol, respectively. However, these two alditols have different structures, so they will not be the same.

On the other hand, if we treat glucose and galactose with NaBH4, we will obtain the corresponding alditol, glucitol (also known as sorbitol), which is the same for both sugars. This is because glucose and galactose are epimers at the C4 position, which means that they differ only in the configuration of the hydroxyl group at this position. This difference does not affect the way the sugar is reduced by NaBH4, so both glucose and galactose will give the same alditol, glucitol.

Therefore, the L-aldohexose that gives the same alditol as glucose when treated with NaBH4 is galactose.

Learn more about L-aldohexose

brainly.com/question/14300876

#SPJ11

The correct statements are a and e. a. Cu will react with H⁺ to produce H₂: This is a redox reaction in which copper (Cu) is oxidized to Cu²⁺ while hydrogen ions (H⁺) are reduced to hydrogen gas (H₂). Therefore, this statement is correct.

b. The most active metal of the following group: Na, K, and Ca is Na: This statement is incorrect as the correct order of increasing reactivity is Ca < K < Na.

c. Cu⁺ is a stronger oxidizing agent than Cu²⁺: This statement is incorrect as Cu⁺ is actually a weaker oxidizing agent than Cu²⁺.

d. Ce⁴⁺ will oxidize Au to Au³⁺: This statement is correct as Ce⁴⁺ is a strong oxidizing agent that can oxidize gold (Au) to Au³⁺.

e. The correct order of reducing strength is Ba > Ca > Na: This statement is correct as reducing strength is related to the ease with which a metal can lose electrons and form positive ions. The larger the ionization energy, the less reactive the metal is as it is harder to remove electrons from its outer shell. Therefore, Ba has the highest reducing strength, followed by Ca and then Na.

In summary, the correct statements are a and e.

To know more about oxidizing agent, visit:

https://brainly.com/question/10547418

#SPJ11