An electrician is trying to decide which kind of material to use to wire a house.



carbon steel: conductivity = 1.43 × 10−7, resistance = 1 × 1010


copper: conductivity = 5.96 × 107, resistance = 1.68 × 10-8


gold: conductivity = 4.11 × 107, resistance = 2.44 × 10−8


iron: conductivity = 1 × 107, resistance = 1.0 × 10−7


Based on this information, which material should the electrician use?



(1 point)



copper



iron



gold




carbon steel

The active galaxies and their central engines may be temporarily fed by a near experience with a neighbor system(galaxies)

In dynamic worlds, their central motors may be incidentally nourished by the growth of matter.

Accumulation happens when matter, such as gas or clean, is gravitationally pulled into a central question, such as a supermassive dark gap, and starts to wind internally.

As the matter gets closer to the central protest, it speeds up and warms up, transmitting strong radiation within the frame of X-rays and gamma beams. This process can result in the transitory increment in brightness and activity of the dynamic universe.

The matter that's accumulated onto the central motor can come from an assortment of sources, such as the interstellar medium, adjacent stars, or indeed other worlds in near nearness. 

To know more about galaxies  refer to this :

https://brainly.com/question/1840671

#SPJ1

The full question is

In active galaxies, their central engines may be temporarily fed by a close encounter with a neighbor galaxy.

The answers are: A. Average velocity of deuteron = 107 m/s, B. Time taken by deuteron to cover 8 m = 1.89 x 10^-7 s, C. Acceleration of deuteron = 5.34 x 10^14 m/s^2.

To calculate the average velocity of the deuteron during its acceleration, we can use the formula:
average velocity = (initial velocity + final velocity) / 2
As the deuteron starts from rest, the initial velocity is zero. The final velocity is given as 2 x 107 m/s. Therefore, the average velocity can be calculated as:
average velocity = (0 + 2 x 107) / 2 = 107 m/s
To calculate the time taken by the deuteron to cover the distance of 8 m, we can use the formula:
distance = (initial velocity x time) + (1/2 x acceleration x time^2)
As the initial velocity is zero, the above equation reduces to:
distance = 1/2 x acceleration x time^2
Rearranging the equation, we get:
time = sqrt(2 x distance / acceleration)
Substituting the values, we get:
time = sqrt(2 x 8 / acceleration) = sqrt(16 / acceleration)
To find the acceleration, we can use the formula:
final velocity^2 = initial velocity^2 + 2 x acceleration x distance
As the initial velocity is zero, the equation becomes:
final velocity^2 = 2 x acceleration x distance
Substituting the values, we get:
(2 x 107)^2 = 2 x acceleration x 8
Simplifying, we get:
acceleration = (2 x 107)^2 / (2 x 8) = 5.34 x 10^14 m/s^2
Substituting this value in the time equation, we get:
time = sqrt(16 / 5.34 x 10^14) = 1.89 x 10^-7 s

To know more about deuteron visit:

brainly.com/question/30009431

#SPJ11

The work need to be done on the car to increase speed is 100 kJ.

We can use the formula:

Work = (1/2) * mass * (final velocity^2 - initial velocity^2)

Substituting the given values, we get:

Work = (1/2) * 1260 kg * (31 m/s)^2 - (21 m/s)^2
Work = (1/2) * 1260 kg * (961 - 441) m^2/s^2
Work = (1/2) * 1260 kg * 520 m^2/s^2
Work = 327,600 J or 327.6 kJ

Therefore, the net work done on the car to increase its speed from 21.0 m/s to 31.0 m/s is 327.6 kJ, which is more than 100 kJ.

to know more about work

brainly.com/question/31981132

#SPJ11

If the object's moment of inertia increases by a factor of 2 without the application of an external torque, its angular velocity will decrease by a factor of 2.

This is due to the law of conservation of angular momentum, which states that the total angular momentum of an isolated system remains constant unless acted upon by an external torque.

Since no external torque is applied, the object's initial angular momentum must be conserved. Therefore, the product of its moment of inertia and angular velocity must remain constant.

If the moment of inertia doubles, the angular velocity must halve to maintain the same angular momentum.

So the object's new angular velocity will be half of its original angular velocity, or omega/2.

Read more about Angular velocity.

https://brainly.com/question/30237820

#SPJ11

A seven-segment display is a common type of digital display used to show numeric information. Each segment represents a single digit from 0 to 9 and can be individually illuminated to create the desired number.

Sevensegmentdisplaye. v is a digital circuit that drives a segment of a seven-segment display. It takes binary input and converts it into the appropriate signal to light up the segment.

The circuit is composed of logic gates such as AND, OR, and NOT gates, as well as flip-flops and decoders. These components work together to create the desired output signal. The binary input is decoded into the corresponding signal that drives the segment.

In the sevensegmentdisplaye.v circuit, each segment is driven by a separate circuit. The circuit includes a current-limiting resistor to protect the LED from burning out due to excessive current. When the appropriate signal is sent to the circuit, the LED lights up, creating the desired segment of the display.

Overall, the sevensegmentdisplaye.v circuit is a crucial component of any seven-segment display. Without it, the display would not be able to show numeric information accurately and efficiently.

You can learn more about binary input at: brainly.com/question/15400003

#SPJ11

c) 105 rads/s.

Angular velocity is defined as the rate of change of angular displacement with respect to time. It is measured in radians per second (rad/s).

In this case, we are given a sine wave with a frequency of 50 kHz. We know that the angular frequency (ω) of a sine wave is given by:

ω = 2πf

where f is the frequency in hertz (Hz) and 2π is a constant.

Substituting the given frequency of 50 kHz, we get:

ω = 2π x 50,000 = 100,000π rad/s

Now, we need to convert the angular frequency to angular velocity. Recall that angular velocity is equal to angular frequency divided by 2π.

ω = 100,000π rad/s

ω/2π = 100,000π/(2π)

ω/2π = 50,000 rad/s

Therefore, the angular velocity of the 50 kHz sine wave is 50,000 rad/s.

However, none of the given options match this answer exactly. Option c) 105 rads/s is the closest answer, but it is not exact. It is possible that there is a mistake in the question or the answer choices. The angular velocity of a 50 kHz sine wave is:
To know more about  velocity visit
https://brainly.com/question/17127206

#SPJ11

The fundamental frequency of standing waves produced in a string depends on various factors, including the length, tension, and mass of the string. In the case of a vertical and sloped section of string, the fundamental frequency will differ due to the varying lengths and tensions of each section.

To determine the fundamental frequency of standing waves in these sections, we need to know the speed of waves in the string, which can be calculated using the formula v = √(T/μ), where T is the tension and μ is the linear mass density of the string.
Assuming that the tension in the string is constant, we can calculate the speed of waves and use it to find the fundamental frequency for each section. For the vertical section, the length of the string is the determining factor, and the fundamental frequency can be calculated using the formula f1 = v/2L. For the sloped section, we need to consider the effective length of the string, which can be calculated using the Pythagorean theorem. Once we have the effective length, we can use the same formula as the vertical section to find the fundamental frequency.
The mass of the block is not directly related to the fundamental frequency of standing waves, but it does affect the tension in the string, which in turn affects the speed of waves and the fundamental frequency. A heavier block will increase the tension in the string and increase the speed of waves, resulting in a higher fundamental frequency.

To know more about fundamental frequency visit:
https://brainly.com/question/29264927
#SPJ11

The index of refraction of the substance is approximately 1.50.

The index of refraction of a substance can be determined by measuring its critical angle for total internal reflection.

In this case, the substance has a critical angle of 61.2° when submerged in water with an index of refraction of 1.333. To find the refractive index of the substance,

we can use the formula:

sin(critical angle) = 1 / refractive index of the substance

Rearranging the formula, we get:

refractive index of the substance = 1 / sin(critical angle)

Plugging in the given value of the critical angle (61.2°) into the formula, we find:

refractive index of the substance = 1 / sin(61.2°) ≈ 1.50

Therefore, the index of refraction of the substance is approximately 1.50.

Therefore, the critical angle for total internal reflection of the substance when it is in air is approximately 41.81

Learn more about critical angle

brainly.com/question/30002645

#SPJ11

The exact solution to the initial value problem is r(θ) = cos(πθ) + 1.

To solve the initial value problem dr/dθ = -π sin(πθ) with the initial condition r(2) = 2, we need to integrate both sides of the differential equation with respect to θ:

∫dr = ∫-π sin(πθ) dθ

r = -∫π sin(πθ) dθ + C

Now, we can find the antiderivative of -π sin(πθ) using substitution. Let u = πθ, so du/dθ = π, and dθ = du/π. The integral becomes:

r = -∫sin(u) du + C

r = cos(u) + C

Since u = πθ, we have:

r = cos(πθ) + C

Now we need to find the constant C using the initial condition r(2) = 2:

2 = cos(π(2)) + C

2 = cos(2π) + C

Since cos(2π) = 1, we have:

C = 1

So, the exact solution to the initial value problem is:

r(θ) = cos(πθ) + 1

To learn more about the initial value problem  visit: https://brainly.com/question/31041139

#SPJ11

To apply this formula to the given values, we first need to convert the direction angle from degrees to radians, which is done by multiplying it by π/180. So, 306.7° * π/180 = 5.357 radians.

we used the formula for the component form of a vector to find the answer to the given question. This formula involves multiplying the magnitude of the vector by the cosine and sine of its direction angle converted to radians, respectively. After plugging in the given values and simplifying, we arrived at the component form (-175.5, 182.9) for the vector v.

To find the component form of a vector given its magnitude and direction angle, we use the following formulas ,v_x = |v| * cosθ ,v_y = |v| * sin(θ) where |v| is the magnitude, θ is the direction angle, and v_x and v_y are the x and y components of the vector.  Convert the direction angle to radians. θ = 306.7° * (π/180) ≈ 5.35 radians Calculate the x-component (v_x). v_x = |v| * cos(θ) ≈ 184.1 * cos(5.35) ≈ -97.1  Calculate the y-component (v_y).
v_y = |v| * sin(θ) ≈ 184.1 * sin(5.35) ≈ 162.5.

To know more about direction visit :

https://brainly.com/question/13899230

#SPJ11

The weights of individual packages of candies vary somewhat. Suppose that package weights are normally distributed with a mean of 49.8 grams and a standard deviation of 1.2 grams.

a. The probability that a randomly selected package weighs between 48 and 50 grams is 0.4325.

b. The probability that a randomly selected package weighs more than 51 grams is 0.1587.

c. A value of k for which the probability that a randomly selected package weighs more than k grams would be considered surprising is 51.774 grams.

To solve this problem, we will use the normal distribution formula and z-scores

z = (x - μ) / σ

Where z is the z-score, x is the given value, μ is the mean, and σ is the standard deviation.

a. To find the probability that a randomly selected package weighs between 48 and 50 grams, we need to find the area under the normal curve between these two values. We can use the z-scores for each value

z1 = (48 - 49.8) / 1.2 = -1.5

z2 = (50 - 49.8) / 1.2 = 0.17

Using a standard normal table or calculator, we can find the area between these z-scores to be approximately 0.4325. Therefore, the probability that a randomly selected package weighs between 48 and 50 grams is 0.4325.

b. To find the probability that a randomly selected package weighs more than 51 grams, we need to find the area under the normal curve to the right of 51. We can use the z-score for 51

z = (51 - 49.8) / 1.2 = 1

Using a standard normal table or calculator, we can find the area to the right of this z-score to be approximately 0.1587. Therefore, the probability that a randomly selected package weighs more than 51 grams is 0.1587.

c. To find a value of k for which the probability that a randomly selected package weighs more than k grams would be considered surprising, we need to find the z-score for this value such that the area to the right of the z-score is less than or equal to some level of significance. For example, if we use a level of significance of 0.05 (or 5%), we want to find the z-score for which the area to the right is less than or equal to 0.05.

Using a standard normal table or calculator, we can find that the z-score for an area of 0.05 to the right is approximately 1.645. Therefore, we can solve for k using this z-score

1.645 = (k - 49.8) / 1.2

k - 49.8 = 1.974

k = 51.774

Therefore, a value of k for which the probability that a randomly selected package weighs more than k grams would be considered surprising is 51.774 grams. This means that if we observe a package weighing more than 51.774 grams, it would be considered surprising at a level of significance of 0.05.

To know more about probability here

https://brainly.com/question/9893505

#SPJ4

Horizontal Gene Transfer (HGT) is the movement of genetic material between different organisms that are not related through normal reproductive processes.

This process is important in bacterial evolution and can contribute to the acquisition of new genes, traits, and functions.

In Gram-positive bacteria, competence for transformation is regulated by a quorum-sensing mechanism that involves cell density (CF). When the cell density reaches a certain threshold, the bacteria produce and secrete a peptide signal that activates the expression of genes involved in competence. This peptide signal is sensed by a translocosome, which transports DNA into the cell.

Homologous recombination is required for HGT through a transformation in bacteria. This process involves the integration of foreign DNA into the chromosome of the recipient cell by the homologous recombination machinery.

The %GC content of a genome can be used to identify HGT genes within genomes using bioinformatic methods. Genes that were acquired through HGT are often associated with a different %GC content than the rest of the genome. For example, if a genome has a low %GC content, but a particular gene has a high %GC content, this suggests that the gene was acquired through HGT from an organism with a higher %GC content.

Learn more about Gene Transfer here:

https://brainly.com/question/13049502

#SPJ11

The process of the blue giant start includes stellar Formation, main Sequence Phase, expansion and Cooling, helium Fusion, variable Behavior, and supernova.

The stage in the formation of a star just before nuclear reactions ignite. After a massive red giant star ejects its outer layers, its hot inner core is exposed, and it becomes a blue giant star.

During the process of a blue giant star,  once a star consumes all its hydrogen, the core superheats and pushes its surface layers far out into space.

The process of the blue giant start includes;

Learn more about blue giant stars here: https://brainly.com/question/31222192

#SPJ1

If one branch of a parallel circuit opens, the remaining individual branch currents will increase. This is because the total resistance in the circuit will decrease,

allowing more current to flow through each of the remaining branches. When a parallel circuit is functioning properly, the total current flowing through the circuit is equal to the sum of the individual branch currents.

However, if one branch opens, the current flowing through that branch will drop to zero, while the current through the other branches will remain constant.

This means that the total current in the circuit will decrease, resulting in an increase in the individual branch currents.

It is important to note that the total voltage in the circuit will remain the same, as voltage is shared equally among all branches of a parallel circuit.

Therefore, if one branch of a parallel circuit opens, it is possible for the remaining branches to continue to function normally,

provided that the total current through the circuit does not exceed the capacity of the power supply or other components.

To know more about resistance  refer here

https://brainly.com/question/30799966#

#SPJ11

When the current in a cable is reversed, the vertical axis intercept switches from negative to positive due to the change in the direction of the magnetic field.

This occurs because the Lorentz force, which governs the interaction between a moving charged particle and an external magnetic field, depends on the direction of both the magnetic field and the current. When the current reverses, the direction of the magnetic field also changes, causing the force to act in the opposite direction.

Consequently, the vertical axis intercept, which represents the balance between the gravitational and magnetic forces, switches its sign from negative to positive, indicating a change in the equilibrium point.

Learn more about Lorentz force at https://brainly.com/question/14432710

#SPJ11

The angular acceleration of the winch cylinder is 2g/R, and the acceleration of the bucket is 2g, where g is the acceleration due to gravity and R is the radius of the winch cylinder.

Newton's second law for rotation states that the net torque acting on an object is equal to the object's moment of inertia multiplied by its angular acceleration. We can use this law to find the acceleration of a bucket in an old-fashioned well and the angular acceleration of the winch cylinder.

Let's assume that the bucket has a mass of m and is attached to a rope that is wound around a winch cylinder of radius R.

The cylinder has a moment of inertia I. If we neglect frictional forces and assume that the rope is not slipping on the cylinder, then the net torque acting on the system is due to the weight of the bucket.

The weight of the bucket exerts a torque on the winch cylinder, given by the expression:

τ = mgR

where g is the acceleration due to gravity. The moment of inertia of the winch cylinder can be found using the formula:

I = ½MR²

where M is the mass of the cylinder.

According to Newton's second law for rotation, we have:

τ = Iα

where α is the angular acceleration of the winch cylinder. Substituting the expressions for τ and I, we get:

mgR = ½MR²α

Solving for α, we get:

α = (2gR) / R²

α = 2g / R

Therefore, the angular acceleration of the winch cylinder is directly proportional to the acceleration due to gravity and inversely proportional to the radius of the cylinder.

To find the acceleration of the bucket, we can use the formula for linear acceleration in terms of angular acceleration:

a = αR

Substituting the value of α that we just found, we get:

a = (2gR) / R

a = 2g

Therefore, the acceleration of the bucket is directly proportional to the acceleration due to gravity and independent of the radius of the winch cylinder.

Learn more about angular acceleration

brainly.com/question/1592013

#SPJ11

The given statement "Nuclear fusion is a potential source of cheap, clean energy; room-temperature fusion was achieved nearly ten years ago" is False

While nuclear fusion has the potential to be a source of cheap, clean

energy, and scientists have been working on achieving room-

temperature fusion for many years, it has not yet been achieved.

As of my knowledge cutoff date of 2021, scientists had not yet achieved

room-temperature nuclear fusion.

There have been various experimental breakthroughs in nuclear fusion,

including the achievement of high-temperature fusion in large

experimental reactors, but achieving practical nuclear fusion for use as

an energy source is still a significant technical challenge.

To know more about nuclear fussion refer here

https://brainly.com/question/215894#

#SPJ11

The net force exerted on the car is 2000 N, which corresponds to option (b).

The net force exerted on an object can be calculated using Newton's second law of motion, which states that the net force (F_net) acting on an object is equal to the mass (m) of the object multiplied by its acceleration (a).

In this case, the mass of the car is given as 1000 kg, and the acceleration is 2 m/s². Plugging these values into the equation, we have:

F_net = m × a

F_net = 1000 kg × 2 m/s²

F_net = 2000 N

Therefore, the net force exerted on the car is 2000 N.

The correct answer is (b) 2000 N.

You can learn more about net force at: brainly.com/question/18031889

#SPJ11

The electron gained 10 eV of kinetic energy.

When an electron moves from a lower potential energy level to a higher one, it gains kinetic energy.

The potential difference or voltage between the two levels determines the amount of kinetic energy gained by the electron.

In this case, the electron moved from 5 V to 15 V, meaning that the potential difference or voltage was 10 V.

The kinetic energy gained by the electron is therefore given by the equation: KE = qV, where q is the charge of the electron and V is the potential difference.

Substituting the values, we get KE = (1.6 x 10^-19 C) x 10 V = 1.6 x 10^-18 J or 10 eV.

Therefore, the electron gained 10 eV of kinetic energy.

For more such questions on kinetic energy, click on:

https://brainly.com/question/8101588

#SPJ11

To calculate the kinetic energy gained by an electron moving from 5V to 15V, we need to use the formula for kinetic energy: KE = (1/2)m[tex]v^{2}[/tex], where m is the mass of the electron and v is its velocity.

Since we are only given the change in potential energy (from 5V to 15V), we need to use the formula for potential energy: PE = qV, where q is the charge of the electron and V is the potential difference. The charge of an electron is -1.6 x [tex]10^{-19}[/tex] Coulombs. Therefore, the potential energy gained by the electron is PE = (-1.6 x [tex]10^{-19}[/tex] C) x (15V - 5V) = -1.6 x [tex]10^{-19}[/tex] J. To convert this potential energy into kinetic energy, we use the formula: KE = PE. Therefore, the electron gained -1.6 x [tex]10^{-19}[/tex] J of kinetic energy. However, this answer is in joules, not electron volts (eV), which is a more commonly used unit for measuring energy in the context of atomic and molecular systems. To convert joules to electron volts, we use the conversion factor: 1 eV = 1.6 x [tex]10^{-19}[/tex] J. Therefore, the electron gained: -1.6 x 1 [tex]10^{-19}[/tex] J / (1.6 x [tex]10^{-19}[/tex] J/eV) = -1 eV. Since energy cannot be negative, we can conclude that the electron gained 1 eV of kinetic energy as it moved from 5V to 15V. Therefore, the correct answer is O 1 eV.

Learn more about potential energy here :

https://brainly.com/question/24284560

#SPJ11

At the bottom of the incline, the sphere has a translational velocity of 6.32 m/s and a rotational velocity of 42.13 rad/s, and the total energy is split between kinetic and rotational energy with KE = 37.58 J and RE = 21.28 J.

The motion of the sphere can be analyzed by considering its potential energy (PE), kinetic energy (KE), and rotational energy (RE).

At the top of the incline, all of the energy is in the form of potential energy:

PE = mgh

where

m is the mass of the sphere,

g is the acceleration due to gravity (9.81 m/s^2), and

h is the height of the incline.

The height can be calculated as follows:

h = sin(35°) x 7.0 m

  = 4.0 m

PE = (1.5 kg)(9.81 m/s²)(4.0 m)

    = 58.86 J

As the sphere rolls down the incline, its potential energy is converted to kinetic energy and rotational energy.

The kinetic energy can be calculated using the translational velocity of the sphere:

[tex]KE = (1/2)mv^2[/tex]

where

v is the velocity of the sphere.

The velocity can be calculated using the conservation of energy principle, which states that the total energy (PE + KE + RE) remains constant:

PE = KE + RE

At the bottom of the incline, all of the potential energy has been converted to kinetic energy and rotational energy, so the total energy is:

PE = 0

KE + RE = 58.86 J

The translational velocity of the sphere can be calculated from the KE as follows:

[tex]KE = (1/2)mv^2[/tex]

[tex]v = \sqrt{(2KE/m)[/tex]

[tex]v = \sqrt{(2(58.86 J)/(1.5 kg))[/tex]

  = 6.32 m/s

The rotational energy of the sphere can be calculated using its moment of inertia:

[tex]RE = (1/2)Iw^2[/tex]

where

I is the moment of inertia of the sphere,

w is its angular velocity, and

RE is its rotational energy.

The moment of inertia of a solid sphere is given by

[tex]I = (2/5)mr^2[/tex]

[tex]I = (2/5)(1.5 kg)(0.15 m)^2[/tex]

 = 0.0225 kg*m²

Since the sphere is rolling without slipping, the translational velocity of the sphere is related to its angular velocity by:

v = rw

where

r is the radius of the sphere.

Solving for w:

w = v/r

  = (6.32 m/s)/(0.15 m)

  = 42.13 rad/s

The rotational energy of the sphere can now be calculated:

[tex]RE = (1/2)Iw^2[/tex]

     [tex]= (1/2)(0.0225 kg*m^2)(42.13 rad/s)^2[/tex]

     = 21.28 J

Therefore, at the bottom of the incline, the sphere has a translational velocity of 6.32 m/s and a rotational velocity of 42.13 rad/s, and the total energy is split between kinetic and rotational energy with KE = 37.58 J and RE = 21.28 J.

To know more about rotational velocity refer here

brainly.com/question/26095104#

#SPJ11

The only possible choice for the magnitude of the resultant is all of the above are possible. (option a.)

When adding two vectors with magnitudes of 200 and 40, the resultant magnitude can fall between the absolute difference and the sum of the magnitudes. This is due to the potential angles between the vectors. Therefore, the possible range for the resultant magnitude is between (200 - 40) = 160 and (200 + 40) = 240.

Based on the provided options, the only choice that doesn't fit within this range is option b (40). All other options (a, c, d, e) are possible outcomes, so the correct answer is a. all of the above are possible.

More on magnitude: https://brainly.com/question/24683831

#SPJ11

The form of energy that is lost in great quantities at every step up the trophic ladder is heat energy.

As energy is transferred from one trophic level to the next, some of it is always lost in the form of heat. This is because energy cannot be efficiently converted from one form to another without some loss.

Therefore, the amount of available energy decreases as it moves up the food chain, making it harder for higher level consumers to obtain the energy they need. This loss of energy ultimately limits the number of trophic levels in an ecosystem and affects the overall productivity of the ecosystem.

learn more about energy here:

https://brainly.com/question/25384702

#SPJ11

Your friend did not do any work in trying to move the rock due to the absence of displacement. In order to calculate the work done, we need to consider two factors: the force applied and the displacement caused by that force.

Work is defined as the product of force and displacement in the direction of the force. In this scenario, although your friend exerted a force of 10,000 N on the rock, he failed to move it. Since there was no displacement, the work done by your friend is zero. Work requires the application of force over a distance, resulting in a change in position or displacement.

Without any displacement, no work is accomplished. It's important to note that while your friend expended effort and energy in attempting to move the rock, work specifically refers to the transfer of energy to cause displacement. To perform work, an object must be displaced.

Learn more about displacement here:

https://brainly.com/question/11934397

#SPJ11

If a system absorbs 12 J of heat from the surroundings; meanwhile, 28 of work is done by the system then the change in internal energy is 40 J. The correct answer is (d) 40 J

The first law of thermodynamics states that the change in the internal energy of a system is equal to the heat added to the system minus the work done by the system. Therefore, ΔU = Q - W.
In this case, the system absorbs 12 J of heat from the surroundings, which means Q = 12 J (note that we use a positive sign because heat is added to the system). Additionally, 28 J of work is done BY the system, which means W = -28 J (note that we use a negative sign because work is done BY the system).
Now we can calculate the change in internal energy:
ΔU = Q - W = 12 J - (-28 J) = 12 J + 28 J = 40 J
Therefore, the answer is (d) 40 J.

To learn more about internal energy https://brainly.com/question/29794635

#SPJ11

A 15-ampere rated duplex receptacle may be installed on a (15- or 20-ampere) branch circuit.

The National Electrical Code (NEC) allows a 15-ampere rated duplex receptacle to be installed on either a 15-ampere or a 20-ampere branch circuit. A 15-ampere circuit provides the minimum required amperage for the receptacle, while a 20-ampere circuit offers additional capacity for powering more devices.

However, installing a 15-ampere rated receptacle on a circuit with higher amperage than 20-ampere, like a 25-ampere circuit, would not be allowed due to potential overloading and safety concerns. Always follow the NEC guidelines and local electrical codes when installing electrical devices to ensure safety and compliance.

To know more about National Electrical Code click on below link:

https://brainly.com/question/17215290#

#SPJ11

When the battery is removed

(a) Charge remains constant

(b) Potential difference increases

(c) Electric field increases

(d) Energy remains constant

(e) Energy density increases

When the battery is removed, the charge on the plates remains constant since there is no path for the charge to flow. As the distance between the plates is decreased, the electric field between the plates increases since the charge density on the plates remains constant.

This leads to an increase in the potential difference between the plates since the potential difference is proportional to the electric field times the distance. However, the energy stored in the capacitor remains constant since it depends on the charge and potential difference, both of which remain constant.

As the distance between the plates decreases, the energy density (energy per unit volume) of the electric field increases since the volume between the plates decreases while the energy remains constant.

For more questions like Battery click the link below:

https://brainly.com/question/29569070

#SPJ11

The power needed to operate this refrigerator is 6.02 megawatts (MW).

Power refers to the rate at which work is done or energy is transferred or transformed. It is a measure of how quickly or efficiently energy is converted or used. Power is typically expressed in units of watts (W), which is equal to one joule per second (J/s).

Mathematically, power can be calculated using the formula:

Power = Work / Time

where Work represents the amount of energy transferred or transformed, and Time is the duration over which the work is done.

Power is a fundamental concept in various fields, including physics, engineering, and electronics, and it plays a crucial role in understanding and analyzing energy systems and their efficiency.

Heat extracted = 89 MJ/h × 10⁶ J/MJ = 89 × 10⁶ J/h

Tc = 2°C + 273.15 = 275.15 K

Th = 22.0°C + 273.15 = 295.15 K

COP = Th / (Th - Tc)

COP = 295.15 K / (295.15 K - 275.15 K) = 295.15 K / 20 K = 14.7575

Power = Heat extracted / COP

Power = (89 × 10⁶ J/h) / 14.7575 = 6.02 × 10⁶ W or 6.02 MW

Learn more about Power, here:

https://brainly.com/question/29575208

#SPJ4

The rate at which work is completed, energy is moved, or is converted is referred to as power. The power needed to operate this refrigerator is 1.79 KW.

Thus, Power can be determined mathematically using the following formula: Power = Time / Work.  Time is the length of time that the work is completed and Work is the quantity of energy that is transmitted or converted.

P = Q / Δt,where P represents power, Q represents heat removed from the refrigerator, and t represents temperature change. The following information is provided: Q = 89 MJ/h. Temperature difference: t = 22.0°C - 2.0°C = 20.0°C

Since power is commonly measured in Watts, we must first convert the heat extraction rate from MJ/h to Joules per second (Watts).

1 MJ = 1,000,000 J

1 h = 3600 s

Therefore, 89 MJ/h = 89,000,000 J / 3600 s ≈ 24,722.22 J/s.

Now, we can calculate the power: P = 24,722.22 J/s / 20.0°C.= 1.79 KW.

However, we need to convert the temperature difference to Kelvin since the temperature must be in absolute units for the calculation. Therefore, 20.0°C = 20.0 K (since the Celsius and Kelvin scales have the same increment).

Thus, The rate at which work is completed, energy is moved, or is converted is referred to as power. The power needed to operate this refrigerator is 1.79 KW.

Learn more about Power, refer to the link:

https://brainly.com/question/29575208

#SPJ12

The required gap δ is approximately 6.936 mm so the rails just touch one another when the temperature is increased from t1 = -14 ∘f to t2 = 90 ∘f.

The required gap δ can be determined by using the formula: δ = αL(t2 - t1), where α is the coefficient of linear expansion, L is the length of the rails, and t1 and t2 are the initial and final temperatures, respectively.

When the temperature increases from t1 = -14 ∘f to t2 = 90 ∘f, the change in temperature is Δt = t2 - t1 = 90 - (-14) = 104 ∘f. To find the coefficient of linear expansion α, we need to know the material of the rails.

Assuming the rails are made of steel, the coefficient of linear expansion is α = 1.2 x 10^-5 / ∘C. Converting the temperature difference to ∘C, we have Δt = 57.8 ∘C.

The length of the rails is not given, so let's assume it is 10 meters. Using the formula, we can now calculate the required gap:

δ = αLΔt = (1.2 x 10^-5 / ∘C) x (10 m) x (57.8 ∘C) = 6.936 mm

To know more about linear expansion, click here;

https://brainly.com/question/14780533

#SPJ11

Batteries in a circuit typically supply power to the circuit by converting chemical energy into electrical energy.

However, under certain circumstances, such as during charging or when connected in reverse, batteries can absorb power from the circuit and store it as chemical energy for later use. This is commonly observed in rechargeable batteries, where they can be recharged by applying a higher voltage to reverse the chemical reactions that occurred during discharge. So while batteries primarily serve as power sources, they can also absorb power under specific conditions to facilitate their recharging process. Batteries in a circuit typically supply power to the circuit by converting chemical energy into electrical energy.

learn more about electrical here:

https://brainly.com/question/31173598

#SPJ11