Consider a large truck carrying a heavy load, such as steel beams. A significant hazard for the driver is that the load may slide forward, crushing the cab, if the truck stops suddenly in an accident or even in braking. Assume, for example, that a 10 000-kg load sits on the flatbed of a 20 000-kg truck moving at 12.0 m/s. Assume that the load is not tied down to the truck, but has a coefficient of friction of 0.500 with the flatbed of the truck.
A) Calculate the minimum stopping distance for which the load will not slide forward relative to the truck.
B) Is any piece of data unnecessary for the solution?
a) mass of the load.
b) mass of the truck.
c) velocity.
d) coefficient of static friction.
e) all are necessary.
Answer:
A)
the minimum stopping distance for which the load will not slide forward relative to the truck is 14 m
B)
data that were not necessary to the solution are;
a) mass of truck and b) mass of load
Explanation:
Given that;
mass of load [tex]m_{LS}[/tex] = 10000 kg
mass of flat bed [tex]m_{FB}[/tex] = 20000 kg
initial speed of truck [tex]v_{0}[/tex] = 12 m/s
coefficient of friction between the load sits and flat bed μs = 0.5
A) the minimum stopping distance for which the load will not slide forward relative to the truck.
Now, using the expression
Fs,max = μs [tex]F_{N}[/tex] -------------let this be equation 1
where [tex]F_{N}[/tex] = normal force = mg
so
Fs,max = μs mg
ma[tex]_{max}[/tex] = μs mg
divide through by mass
a[tex]_{max}[/tex] = μs g ---------- let this be equation 2
in equation 2, we substitute in our values
a[tex]_{max}[/tex] = 0.5 × 9.8 m/s²
a[tex]_{max}[/tex] = 4.9 m/s²
now, from the third equation of motion
v² = u² + 2as
[tex]v_{f}[/tex]² = [tex]v_{0}[/tex]² + 2aΔx
where [tex]v_{f}[/tex] is final velocity ( 0 m/s )
a is acceleration( - 4.9 m/s² )
so we substitute
(0)² = (12 m/s)² + 2(- 4.9 m/s² )Δx
0 = 144 m²/s² - 9.8 m/s²Δx
9.8 m/s²Δx = 144 m²/s²
Δx = 144 m²/s² / 9.8 m/s²
Δx = 14 m
Therefore, the minimum stopping distance for which the load will not slide forward relative to the truck is 14 m
B) data that were not necessary to the solution are;
a) mass of truck and b) mass of load
How to calculate this operation? m=10kg and L=2500J/kg? What is the Energy?
I hope you will give me the correct answer because the last answer was too rude. His known by SOD!
Answer:
25000J
Explanation:
Formula : Q = m×c×Δt
Q=Heat energy
m= mass
c=specific heat capacity
ΔT = change in temperature.
Q=M x C for this question.
Specific heat capacity = 2500 J/Kg
Mass = 10kg
2500 x 10 = 25000 J
(What is the weight of a 50 kg woman at the top of Jupiter's
atmosphere, where g = 24.8 N/kg? Give your answer in both
newtons and pounds.
Answer:
The correct answer is - 1240 newtons; 278.763 lbs.
Explanation:
g We have studied diffraction from a single slit, where light is sent through a thin opening. A similar phenomena occurs when light bends around a thin object, like a human hair. Here the width of the hair plays the role of the width of the single slit. Measurements found that when a beam of light of wavelength 632.8 nm was shone on a single strand of hair, the first dark fringe on either side of the central bright spot were 5.22 cm apart. If the screen is 1.25 meters away, how thick was this strand of hair?
Answer:
[tex]3.031\times 10^{-5}\ \text{m}[/tex]
Explanation:
[tex]y[/tex] = Distance between central maxima and first minimum
m = Order = 1
d = Thickness of hair
[tex]\lambda[/tex] = Wavelength = 632.8 nm
L = Distance between light source and screen = 1.25 m
Width of central maximum is given by
[tex]2y=5.22\times 10^{-2}\\\Rightarrow y=\dfrac{5.22\times 10^{-2}}{2}\\\Rightarrow y=0.0261\ \text{m}[/tex]
Distance between central maxima and first minimum is given by
[tex]y=L\tan\theta_{min}\\\Rightarrow \tan\theta_{min}=\dfrac{y}{L}\\\Rightarrow \tan\theta_{min}=\dfrac{0.0261}{1.25}\\\Rightarrow \theta_{min}=\tan^{-1}0.02088\\\Rightarrow \theta_{min}=1.1962^{\circ}[/tex]
Since [tex]\theta[/tex] is small [tex]\tan\theta_{min}=\sin\theta_{min}[/tex]
[tex]\sin\theta_{min}=\dfrac{m\lambda}{d}\\\Rightarrow d=\dfrac{m\lambda}{\sin\theta}\\\Rightarrow d=\dfrac{1\times 632.8\times 10^{-9}}{\sin1.1962^{\circ}}\\\Rightarrow d=3.031\times 10^{-5}\ \text{m}[/tex]
The strand of hair is [tex]3.031\times 10^{-5}\ \text{m}[/tex] thick.
What does the Preamble to the Constitution set out as the goals for the government? Which branches of
government address each of the goals of the Preamble specifically?
Answer:
Six purposes of government: to form a more perfect union; establish justice; insure domestic tranquility; provide for the common defense; promote the general welfare; secure the blessings of liberty now and in the future.
Explanation:
A child balancing while standing on a chair is demonstrating which type of energy?
A. Potential energy,
B. Nuclear energy,
C. Electrostatic energy,
Answer:
Potential Energy
Explanation:
How does the amplitude of the wave change as you get farther from the speaker?
Answer:
The amplitude decreases
Explanation:
From the inverse square law, we know that;
I ∝ 1/d²
Where;
I is intensity
d is distance
Also, we know that;
A² ∝ I
Where A is amplitude
Thus, we can say that;
A ∝ 1/d²
Thus, amplitude is inversely proportional to the distance.
So the larger the distance, the lesser the amplitude and the lesser the distance, the higher the amplitude.
Thus, as you move farther from the speaker the distance increases and therefore the amplitude decreases
________ is described as the pulling force transmitted by the means of a
string, a cable, chain. (An example would be a pulley)
Please help I need to turn this today!
Answer:
it should be tension for the space
Answer:
tension
Explanation:
I'm not sure if I'm right but if the example is a pulley a pulley applies tension to a belt or rope or chain to keep it tight
a rugby player passes the ball 5.34 m across the field, where it is caught at the same height as it left his hand. at what angle was the ball thrown if its initial speed was 7.7 m/s, assuming that the smaller of the two possible angles was used
Answer:
[tex]31.035^{\circ}[/tex]
Explanation:
x = Displacement in x direction = 5.34 m
t = Time taken to travel the displacement
y = Displacement in y direction = 0
u = Initial velocity of ball = 7.7 m/s
g = Acceleration due to gravity = [tex]9.81\ \text{m/s}^2[/tex]
Displacement in x direction is given by
[tex]x=u\cos\theta t\\\Rightarrow t=\dfrac{5.34}{7.7 \cos\theta}[/tex]
Displacement in y direction is given by
[tex]y=u\sin\theta t-\dfrac{1}{2}gt^2\\\Rightarrow 0=7.7\sin\theta \dfrac{5.34}{7.7\cos\theta}-\dfrac{1}{2}\times 9.81 (\dfrac{5.34}{7.7\cos\theta})^2\\\Rightarrow 0=7.7\sin\theta-4.905\times \dfrac{5.34}{7.7\cos\theta}\\\Rightarrow 0=7.7^2\sin\theta \cos\theta-4.905\times 5.34\\\Rightarrow 0=7.7^2\dfrac{\sin2\theta}{2}-4.905\times 5.34\\\Rightarrow 0=7.7^2\sin2\theta-4.905\times5.34\times 2\\\Rightarrow \sin2\theta=\dfrac{4.905\times 5.34\times 2}{7.7^2}\\\Rightarrow 2\theta=\sin^{-1}\dfrac{4.905\times 5.34\times 2}{7.7^2}[/tex]
[tex]\Rightarrow \theta=\dfrac{62.07}{2}\\\Rightarrow \theta=31.035^{\circ}[/tex]
The angle at which the ball was thrown is [tex]31.035^{\circ}[/tex].
A 10 kg object moving to the left collides with and sticks to a 3 kg object moving to the right. Which of the following is true of the motion of the combined objects immediately after the collision?
Answer:
"Cannot be determined," if that's an answer choice. It depends on the velocities of both objects, since momentum=mass*velocity.
Explanation:
Explain what happens to the movement, energy and arrangement of particles during the process
of distillation.
Answer:
Distillation separates a liquid from a solution. For example, water can be separated from salty water by simple distillation. This method works because the water evaporates from the solution, but is then cooled and condensed into a separate container. The salt does not evaporate and so it stays behind.
HELP PLEASE
60 POINTS
HAVE A GREAT REST OF YOUR DAY PEOPLE :>
Answer:
The sun and the stars
Explanation:
I hope this helps!
Answer:
Northstar & North Pole
Explanation:
yyggggggggggggggg
Using the American Engineering system of units (AES), a) Calculate the weight of a 170.5 lbm person on the surface of the earth, where the local acceleration due to gravity is 32.174 ft/s2 . Report your answer in pound-force, lbf. b) What would be the weight of a 170.5 lbm astronaut on the moon, where the local acceleration due to gravity is 5.32 ft/s2 . Report your answer in pound-force, lbf.
Answer:
a) the weight of the person is 170.5 lbf
b) weight of the astronaut on the moon is 28.2 lbf
Explanation:
Given the data in the question;
a)
we know that;
weight on the surface of the earth = m[tex]g_{earth[/tex]
given that m = 170.5 lbm and g = 32.174 ft/s²
we substitute
weight on the surface of the earth = 170.5 lbm × 32.174 ft/s²
= 5485.667 lbm-ft/s²
1 lbf = 32.174 lbm-ft/s²
so
weight on the surface of the earth = (5485.667 / 32.174) lbf
weight on the surface of the earth = 170.5 lbf
Therefore, the weight of the person is 170.5 lbf
b)
given that;
weight on the surface of the earth = m[tex]g_{moon[/tex]
m = 170.5 lbm and g = 5.32 ft/s²
weight on the surface of the earth = 170.5 lbm × 5.32 ft/s²
= 907.06 lbm-ft/s²
1 lbf = 32.174 lbm.ft/s²
weight on the surface of the earth = ( 907.06 / 32.174 ) lbf
weight on the surface of the earth = 28.2 lbf
Therefore, weight of the astronaut on the moon is 28.2 lbf
A 20g bullet moving at 200m/s hits a bag of sand and comes to rest in 0.011s, calculate the momentum of the bullet just before hitting the bag
Answer:
momentum = mass * velocity ... kg•m/s
acceleration = v / t = 200 m/s / 11 ms ... m/s^2
force = mass * acceleration = .02 kg * (200 m/s / 11 ms) N
Explanation:
HELP - What are some good topics to add to a Pipeline presentation? So yes, a presentation about pipelines, like for example in the US. Have any ideas??
What is the name of the theory describing how the lithosphere is broken into segments, or plates, which "float" on the asthenosphere, and associates the interactions between these plates with earthquakes and volcanic activity and the formation of mid-ocean ridges, trenches, mountains, and chains of volcanic islands?
A. Conservation of Matter
B. Big Bang Theory
C. Plate Tectonics
D. Theory of Evolution
Answer:
C. Plate Tectonics
Explanation:
The theory of plate tectonics is when the lithosphere is separated into plates. These plates move over or float over the asthenosphere. The movement of these plates cause earthquakes and can interact with the volcanic activity.
An open pipe is 1.42 m long
What fundamental frequency
does it produce?
(Speed of sound = 343 m/s)
(Unit = Hz)
Answer:
the fundamental frequency produced by the open pipe is 120.78 Hz
Explanation:
Given;
length of the open pipe, L = 1.42 m
speed of sound in air, v = 343 m/s
The length of the open pipe for the fundamental frequency is equivalent to half of wavelength;
[tex]L = \frac{\lambda}{2} \\\\\lambda = 2L[/tex]
The fundamental frequency produced by the open pipe is calculated as;
[tex]f_o = \frac{v}{\lambda} \\\\f_o = \frac{v}{2L} \\\\f_o = \frac{343}{2 \times 1.42} \\\\f_o = 120.78 \ Hz[/tex]
Therefore, the fundamental frequency produced by the open pipe is 120.78 Hz
name and explain two sleeping disorders
Neuroticism, psychoticism, and extraversion are the three dominant personality traits according to
A. Paul Costa
B. Hans Eysenck
C. Gordon Allport
D. Robert McCrae
The answer is b I just took the test
Neuroticism, psychoticism, and extraversion are the three dominant personality traits according to Hans Eysenck.
What is Hans Eysenck's theory?Eysenck's theory of personality is based on three logical attributes namely:
a) Introversion vs. extroversion – Extroversion leads to sociable life , while introversion causes need of being alone and limited interactions
b) Neuroticism vs. stability – Neuroticism leads to anxiousness and an overactive sympathetic nervous system while stability leads to emotional stability.
c) Nsychoticism vs. socialization. - psychoticism leads to independent thinking, and hostility. While socialization leads to co-operative and conventional behaviour.
Therefore Neuroticism, psychoticism, and extraversion are the three dominant personality traits according to Hans Eysenck.
To know more about Hans Eysenck's theory follow
https://brainly.com/question/11912668
#SPJ2
TRUE OR FALSE
2. Somnambulism is a psychologically induced altered state of consciousness.
3. Unconscious information processing occurs simultaneously on many parallel
tracks.
4. Your subconscious mind is just the "tip of the iceberg" according to psychologists
like Sigmund Freud.
An 5kg object is released from rest near the surface of a planet. The vertical position of the object as a function of time is shown in the graph. All frictional forces are considered to be negligible. What is the closest approximation of the weight of the object.
a) 300N
b) 30N
c) 5N
d) 150N
Answer:
The correct option is b: 30 N.
Explanation:
First, we need to find the acceleration due to gravity (a):
[tex] y_{f} - y_{0} = v_{o}t - \frac{1}{2}a(\Delta t)^{2} [/tex] (1)
Where:
[tex]y_{f}[/tex]: is the final vertical position (obtained from the graph)
[tex]y_{0}[/tex]: is the initial vertical position (obtained from the graph)
v₀: is the initial speed = 0 (it is released from rest)
Δt: is the variation of time (from the graph)
From the graph, we can take the following values of height and time:
t₀ = 0 s → [tex]t_{f}[/tex] = 5 s
y₀ = 300 m → [tex]y_{f}[/tex] = 225 m
Now, by entering the above values into equation (1) and solving for "a" we have:
[tex] a = 2\frac{y_{0} - y_{f}}{(t_{f} - t_{0})^{2}} = 2\frac{300 m - 225 m}{(5 s - 0)^{2}} = 6 m/s^{2} [/tex]
Finally, the weight of the object is:
[tex] W = ma = 5 kg*6 m/s^{2} = 30 N [/tex]
Therefore, the correct option is b: 30 N.
I hope it helps you!
cosmic Microwave Background radiation is one piece of supporting evidence for the Big Band Theory. Are these microwaves at the longer or shorter end of the spectrum?
are they long or short?
Answer:
it is long.
Explanation:
I know the answer but I don't know how to explain it
Which task would be impossible without radio waves ?
Answer:
checking your e-mail on your computer using a coffee's shop WiFi. No need radio waves for this.
Explanation:
Because you are only checking it, nothing else.
TRUE OR FLASE
12. During sleep the pituitary gland shuts down for the rest of the night.
13. When a person has a nightmare they wake up in a sweat and don't remember
the content of their dream.
Answer:
true for first and false for second
Explanation:
A 7.80 g bullet has a speed of 620 m/s when it hits a target, causing the target to move 6.30 cm in the direction of the bullet's velocity before stopping. (a) Use work and energy considerations to find the average force (in N) that stops the bullet. (Enter the magnitude.) N (b) Assuming the force is constant, determine how much time elapses (in s) between the moment the bullet strikes the target and the moment it stops moving. s
Answer:
[tex]23796.19\ \text{N}[/tex]
[tex]0.0002032\ \text{s}[/tex]
Explanation:
F = Force
s = Displacement = 6.3 cm
m = Mass of bullet = 7.8 g
v = Velocity of bullet = 620 m/s
t = Time taken
Work done is given by
[tex]W=Fs[/tex]
Kinetic energy is given by
[tex]K=\dfrac{1}{2}mv^2[/tex]
Using work energy considerations we get
[tex]Fs=\dfrac{1}{2}mv^2\\\Rightarrow F=\dfrac{1}{2s}mv^2\\\Rightarrow F=\dfrac{1}{2\times 0.063}\times 7.8\times 10^{-3}\times 620^2\\\Rightarrow F=23796.19\ \text{N}[/tex]
The average force that stops the bullet is [tex]23796.19\ \text{N}[/tex].
Force is given by
[tex]F=m\dfrac{v-u}{t}\\\Rightarrow t=m\dfrac{v-u}{F}\\\Rightarrow t=7.8\times 10^{-3}\times \dfrac{620}{23796.19}\\\Rightarrow t=0.0002032\ \text{s}[/tex]
The time taken to stop the bullet is [tex]0.0002032\ \text{s}[/tex].
Select True or False for the following statements about electromagnetic waves. A vertical automobile antenna is sensitive to electric fields polarized horizontally. Ultraviolet radiation causes common sunburn. Radio waves travel in vacuum at a lower speed than the visible light. The sun's radiation is most intense in the visible region. Gamma rays can be produced in transitions of an atomic nucleus from one state to another. Radio waves have wavelengths longer than 1 m. X-rays travel in vacuum at a higher speed than the visible light.
Answer:
a) False, b) True, c) true, d) true, e) True, g) False
Explanation:
Se pide que analicemos cada expresión, f) true
a) False. La antena vertical tiene cargas eléctricas que se pueden mover en la direccion vertical, una onda electromagnética polarizada horizontal el campo eléctrico esta en la dirección horizontal por lo cual no puede mover los electrones que están en direccional vertical
be) True. La radiación ultravioleta es absorvidad por la melanina del la piel y crea las quemaduras comunes de insolación.
C) False. Todas la ondas electromagnetismo viajan en la misma velocidad c
d) True. La Temperatura del sol es 5800K por lo cual la radiación mas intensa esta en el rango visible
e) True. Los rayos gamma son de muy alta energía, por lo cual se producen en ransicio0n de los núcleos atmicos.
f) True. El rango de frecuencia para las onda de radio va desde 500 Kahoy hasta 110 MHz, por lo tanto el rango de longitudes de onda es
c= lam f
lam = c/f
lam = 3 108/500 103
lam = 6 102 m
lam = 3 108 / 110 106
lam = 2,72 m
los lo ttnato en todo el rango de las frecuecias de radio la lambda> 1 m
g) False. Todas las ondas electromagnéticas viajan a la misma velocidad c( 3 108m/s)
To determine the coefficient of static friction between two materials, an engineer places a small sample of one material on a horizontal disk whose surface is made of the other material and then rotates the disk from rest with a constant angular acceleration of 0.4 rad/s2. If she determines that the small sample slips on the disk after 9.903 s, what is the coefficient of friction
This question is incomplete, the missing image is uploaded along this answer.
Answer:
the coefficient of friction is 0.32
Explanation:
Given the data in the question;
we make use of kinematic equation of motion;
ω = ω₀ + ∝t
we substitute
ω = ( 0 rad/s ) + ( 0.4 rad/s² )( 9.903 s )
ω = 3.9612 rad/s
The centripetal force acting on the sample is;
Fc = mrω²
from the image; r = 200 mm = 0.2 m
so we substitute
Fc = m(0.2 m ) ( 3.9612 rad/s )²
Fc = (3.13822 m/s²)m
we know that the frictional force between the two materials should be providing the necessary centripetal force to rotate the sample object;
f = Fc
μN = Fc
μmg = (3.13822 m/s²)m
μ = (3.13822 m/s²)m / mg
μ = (3.13822 m/s²) / g
acceleration due to gravity g = 9.8 m/s²
so
μ = (3.13822 m/s²) / 9.8 m/s²
μ = 0.32
Therefore, the coefficient of friction is 0.32
A ray of light is incident on a plane mirror at an angle of 30 degree state the angle of reflection?
Answer:
30°
Explanation:
The law of reflection states that when a ray of light reflects off a surface, the angle of incidence is equal to the angle of reflection.
∠i = ∠r
so as ∠i = 30°
∠r will also be 30°
What did you learn about from the NASA's perseverance Rover land on Mars project?
NASA's Mars Pathfinder mission, launched in 1996, put the first free-moving rover—called Sojourner—on the planet. ... Together, these missions have shown scientists that Mars is an active planet that is rich in the ingredients needed for life as we know it—water, organic carbon, and an energy source
A turtle crawls at 4.32 m/s to cover the short 3.84 m distance to his food bowl. How long does it take?