The hydronium ion concentration of a 0.012 M aniline solution is 2.08 × 10⁻⁶ M.
The equation for the ionization of aniline is;
C₆H₅NH₂ + H₂O ⇌ C₆H₅NH₃⁺ + OH⁻
The equilibrium expression for the above reaction is;
Kb = ([C₆H₅NH₃⁺][OH⁻])/[C₆H₅NH₂]
Since aniline is a weak base, we can assume that the amount of hydroxide ion produced is negligible compared to the amount of the weak base present in the solution. Therefore, we can simplify the expression as follows;
Kb =[C₆H₅NH₃⁺][OH⁻])/[C₆H₅NH₂]
≈[C₆H₅NH₃⁺][OH⁻])/[C₆H₅NH₂]
where [C₆H₅NH₂]0 is the initial concentration of aniline.
Since we are given [C₆H₅NH₂]0 = 0.012 M, we can use the above equation to calculate [C₆H₅NH₃⁺];
Kb =[C₆H₅NH₃⁺][OH⁻])/[C₆H₅NH₂]0
4.0 × 10⁻¹⁰ = [C₆H₅NH₃⁺][OH⁻]/0.012
[C₆H₅NH₃⁺] = (4.0 × 10⁻¹⁰) × 0.012 / [OH⁻]
Since water is neutral, [H₃O⁺] = [OH⁻]. Therefore,
Kw = [H₃O⁺][OH⁻] = 1.0 × 10⁻¹⁴
[H₃O⁺] = [OH⁻] = Kw / [OH⁻]
= 1.0 × 10⁻¹⁴ / [OH-]
Substituting [OH-] = [C₆H₅NH₃⁺] into the above equation, we get:
[H₃O⁺] = 1.0 × 10⁻¹⁴ / [C₆H₅NH₃⁺]
[H₃O⁺] = 1.0 × 10⁻¹⁴ / [(4.0 × 10⁻¹⁰) × 0.012 / [OH⁻]]
[H₃O⁺] = 2.08 × 10⁻⁶ M
Therefore, the hydronium ion concentration is 2.08 × 10⁻⁶ M.
To know more about hydronium ion concentration here
https://brainly.com/question/13387755
#SPJ4
Hydronium ion concentration of a 0.012 M aniline solution is 3.2 x 10^-6 M. This can be calculated using the Kb value of aniline and the equilibrium expression for the reaction of aniline with water to form the anilinium ion and hydroxide ion.
Aniline is a weak base that reacts with water to form the anilinium ion (C6H5NH3+) and hydroxide ion (OH-), according to the following equilibrium reaction:
C6H5NH2 + H2O ⇌ C6H5NH3+ + OH-
The equilibrium constant for this reaction is the base dissociation constant, Kb, which is given as 4.0 x 10^-10.
Using the Kb value and the initial concentration of aniline (0.012 M), we can calculate the concentration of hydroxide ions (OH-) at equilibrium using the following expression:
Kb = [C6H5NH3+][OH-] / [C6H5NH2]
Since aniline is a weak base, we can assume that the initial concentration of anilinium ion is negligible compared to the initial concentration of aniline, and hence the concentration of anilinium ion can be ignored in the equilibrium expression.
Rearranging the above equation to solve for [OH-], we get:
[OH-] = (Kb x [C6H5NH2]) / [C6H5NH3+]
Substituting the values, we get:
[OH-] = (4.0 x 10^-10 x 0.012) / [C6H5NH3+]
To solve for [C6H5NH3+], we can use the fact that the sum of the concentrations of hydroxide and hydronium ions in water is equal to the ion product of water, Kw, which is 1.0 x 10^-14.
[H3O+] [OH-] = Kw
Since the aniline solution is dilute, we can assume that the contribution of hydronium ion from the water is negligible, and hence we can assume that:
[H3O+] = [OH-]
Substituting the value of [OH-], we get:
[H3O+] = (1.0 x 10^-14) / [OH-] = 3.2 x 10^-6 M.
Therefore, the hydronium ion concentration of a 0.012 M aniline solution is 3.2 x 10^-6 M.
learn more about hydronium here:
https://brainly.com/question/29286376
#SPJ11
account for the relative rates of solvolysis (reaction with a protic solvent) of these compounds through an sn1 mechanism.
The relative rates of solvolysis via an SN1 mechanism are determined by both the stability of the carbocation intermediate and the nature of the leaving group.
The relative rates of solvolysis through an SN1 mechanism are primarily determined by the stability of the intermediate carbocation formed during the reaction. More stable carbocations are formed more easily, which results in faster reaction rates.
In general, tertiary alkyl halides form more stable carbocations compared to secondary or primary alkyl halides. This is due to the increased number of alkyl groups attached to the carbon bearing the leaving group.
The electron-donating effect of these groups leads to greater positive charge delocalization, which stabilizes the carbocation intermediate.
Therefore, tertiary alkyl halides will generally have the fastest rates of solvolysis via an SN1 mechanism, followed by secondary and primary alkyl halides. This trend is consistent with experimental data.
Additionally, the nature of the leaving group also plays a role in the rate of solvolysis. Leaving groups that are better able to stabilize negative charge, such as iodide, tend to promote faster reaction rates compared to leaving groups that are weaker in this regard, such as bromide or chloride.
For more question on solvolysis visit:
https://brainly.com/question/21796580
#SPJ11
Sodium trinitride decomposes to sodium and nitrogen. What is the mass of nitrogen gas if you started with 48. 4 L of sodium trinitride at STP?
When 48.4 L of sodium trinitride at STP decomposes, the mass of nitrogen gas produced is approximately 60.48 grams which are calculated using the number of moles by the molar mass of nitrogen.
Sodium trinitride ([tex]Na_3N[/tex]) decomposes into sodium (Na) and nitrogen ([tex]N_2[/tex]) gas. To determine the mass of nitrogen gas produced, we need to use the ideal gas law and the molar mass of nitrogen.
First, we convert the given volume of sodium trinitride (48.4 L) into moles using the ideal gas law at standard temperature and pressure (STP). At STP, 1 mole of any ideal gas occupies 22.4 L. So, 48.4 L of sodium trinitride is equal to 48.4/22.4 = 2.16 moles.
Next, we look at the balanced chemical equation for the decomposition of sodium trinitride, which shows that for every 1 mole of [tex]Na_3N[/tex], 1 mole of [tex]N_2[/tex] gas is produced.
Therefore, since we started with 2.16 moles of [tex]Na_3N[/tex], we can conclude that 2.16 moles of [tex]N_2[/tex] gas will be produced. To find the mass of nitrogen gas, we multiply the number of moles by the molar mass of nitrogen, which is approximately 28 g/mol. Thus, the mass of nitrogen gas produced is 2.16 moles * 28 g/mol = 60.48 grams of nitrogen gas.
Learn more about ideal gas law here:
https://brainly.com/question/12624936
#SPJ11
Consider the titration of 50.0 mL of 0.200 M HNO3 with 0.100 M NaOH solution. What volume of NaOH is required to reach the equivalence point in the titration?
a. 25.0 mL
b. 50.0 mL
c. 1.00 × 10^2 mL
d. 1.50 × 10^2 mL
The volume of NaOH is (c) 1.00 × 10^2 mL.
The balanced chemical equation for the reaction between HNO3 and NaOH is: HNO3 + NaOH → NaNO3 + H2O
At the equivalence point, all the HNO3 will react with NaOH in a 1:1 molar ratio. This means that moles of HNO3 = moles of NaOH at the equivalence point.
The number of moles of HNO3 initially present in 50.0 mL of 0.200 M solution is:
moles of HNO3 = Molarity × Volume
moles of HNO3 = 0.200 mol/L × 0.0500 L
moles of HNO3 = 0.0100 mol
Therefore, the number of moles of NaOH required to reach the equivalence point is also 0.0100 mol.
The volume of 0.100 M NaOH required to provide 0.0100 mol is:
Volume of NaOH = moles of NaOH / Molarity of NaOH
Volume of NaOH = 0.0100 mol / 0.100 mol/L
Volume of NaOH = 0.100 L or 100 mL
the answer is (c) 1.00 × 10^2 mL.
For more such questions on volume
https://brainly.com/question/1183253
#SPJ11
The volume of NaOH is (c) 1.00 × 10^2 mL. The balanced chemical equation for the reaction between HNO3 and NaOH is: HNO3 + NaOH → NaNO3 + H2O
At the equivalence point, all the HNO3 will react with NaOH in a 1:1 molar ratio. This means that moles of HNO3 = moles of NaOH at the equivalence point.
The number of moles of HNO3 initially present in 50.0 mL of 0.200 M solution is:
moles of HNO3 = Molarity × Volume
moles of HNO3 = 0.200 mol/L × 0.0500 L
moles of HNO3 = 0.0100 mol
Therefore, the number of moles of NaOH required to reach the equivalence point is also 0.0100 mol.
The volume of 0.100 M NaOH required to provide 0.0100 mol is:
Volume of NaOH = moles of NaOH / Molarity of NaOH
Volume of NaOH = 0.0100 mol / 0.100 mol/L
Volume of NaOH = 0.100 L or 100 mL
the answer is (c) 1.00 × 10^2 mL.
Learn more about volume here:
brainly.com/question/1183253
#SPJ11
how do we see cpe c program
In order to see a CPE C program, we need to first understand what CPE and C programming language are. CPE stands for "Critical Path Engineering" which is a method used to analyze and optimize complex systems.
C programming language, on the other hand, is a popular programming language used for system programming, embedded systems, and general-purpose programming.
To see a CPE C program, we would need to have access to the source code written in the C programming language.
This code can be viewed and edited using a text editor or an Integrated Development Environment (IDE).
Once the code is written, it can be compiled into an executable file that can be run on a computer or device. To understand how the program works, we would need to analyze the code and its logic.
Learn more about Language programming at
https://brainly.com/question/30695853
#SPJ11
Benedict's test shows the presence of
Choose...reducing sugars, alcohols, amino acids
.
A positive Benedict's test appears as
Choose...a reddish precipitate, a blue solution ,a color change to purple
.
A negative Benedict's test appears as
Choose...a blue solution, a white precipitate, a colorless solution
Benedict's test shows the presence of reducing sugars. This test is used to detect the presence of reducing sugars such as glucose, fructose, and maltose.
Reducing sugars are those that have a free aldehyde or ketone group and can reduce other compounds. Benedict's reagent, which contains copper sulfate, sodium carbonate, and sodium citrate, is added to the sample being tested. If reducing sugars are present, they react with the copper ions in the reagent to form a reddish precipitate of copper oxide.A positive Benedict's test appears as a reddish precipitate. This indicates the presence of reducing sugars in the sample being tested.
A negative Benedict's test appears as a blue solution. This indicates the absence of reducing sugars in the sample being tested.1. Benedict's test shows the presence of reducing sugars.2. A positive Benedict's test appears as a reddish precipitate.3. A negative Benedict's test appears as a blue solution. Benedict's test is a biochemical test used to detect the presence of reducing sugars in a solution. In a positive Benedict's test, the reaction between the reducing sugar and the copper sulfate in Benedict's reagent forms a reddish precipitate. On the other hand, a negative Benedict's test indicates that there are no reducing sugars present, and the solution remains blue, which is the color of the original reagent.
To know more about ketone visit :
https://brainly.com/question/4439718
#SPJ11
tritium ( ) has a half-life of 12.3 years. how long will it take for a tritium sample to decay to one-eighth of its original activity?
It will take 36.9 years for a tritium sample to decay to one-eighth of its original activity.
Tritium has a half-life of 12.3 years, which means that the amount of tritium in a sample will be reduced by half every 12.3 years. To find out how long it will take for a tritium sample to decay to one-eighth of its original activity, we need to find the number of half-lives required for this reduction.
One-eighth of the original activity is equivalent to 3 half-lives of tritium, since (1/2)^3 = 1/8. Therefore, we can calculate the time required for this decay by multiplying the half-life by 3:
12.3 years/half-life x 3 half-lives = 36.9 years
Thus, it will take 36.9 years for a tritium sample to decay to one-eighth of its original activity.
learn more about tritium here:
https://brainly.com/question/13559964
#SPJ11
Consider the following rate law expression: rate = k[A][B]2. If the concentration of A is tripled and the concentration of B is reduced by half, what is the resulting change in the reaction rate?The rate is increased by 3/2.The rate is reduced by 3/4.The rate stays the same.The rate is doubled.The rate is reduced by 1/2.
If the concentration of A is tripled and the concentration of B is reduced by half, the resulting change in the reaction rate is an increase of 3/2.
The rate law expression rate = k[A][B]2 tells us that the rate of the reaction depends on the concentrations of both reactants, A and B, and that B has a greater impact on the rate than A.
Now, if the concentration of A is tripled, it means that the new concentration of A is three times the original concentration. Similarly, if the concentration of B is reduced by half, it means that the new concentration of B is half the original concentration.
Substituting these new values into the rate law expression gives us:
new rate = k[(3[A])/2][(B)/2]2
Simplifying this expression gives us:
new rate = (9/4)k[A][B]2
Comparing this expression with the original rate law expression, we see that the new rate is (9/4) times the original rate. Therefore, the resulting change in the reaction rate is that the rate is increased by 3/2.
For more such questions on reaction rate:
https://brainly.com/question/30546888
#SPJ11
If the concentration of A is tripled and the concentration of B is reduced by half, the resulting change in the reaction rate will increase by 3/2, as the rate law expression is dependent on the concentration of A and the square of the concentration of B.
The given rate law expression shows that the reaction rate is directly proportional to the concentration of A and the square of the concentration of B. Therefore, if the concentration of A is tripled, the reaction rate will also triple. Similarly, if the concentration of B is halved, the reaction rate will decrease by a factor of 4 (since the concentration is squared in the rate law expression). As a result, the net effect on the reaction rate will be an increase by 3/2 (3/1.5) when the concentration of A is tripled and the concentration of B is halved. This is because the increase in the concentration of A will have a larger effect on the reaction rate than the decrease in the concentration of B.
Learn more about rate law expression here:
https://brainly.com/question/20309887
#SPJ11
The pH of a 0.051 M weak monoprotic acid is 3.35. Calculate the Ka of the acid.
Ka = ( Enter your answer in scientific notation.)
The Ka of the weak monoprotic acid is 3.98 x 10⁻⁵.
To calculate the Ka of a weak monoprotic acid, we can use the given pH and molarity. Here is the formula:
Ka = [H⁺][A⁻]/[HA]
Given the pH of 3.35, we can first find the concentration of H⁺ ions:
[H⁺] = 10^(-pH) = 10^(-3.35) ≈ 4.47 x 10⁻⁴ M
Since it's a weak monoprotic acid, we can assume that the concentration of A⁻ is equal to the concentration of H⁺:
[A⁻] = 4.47 x 10⁻⁴ M
Now, we can find the concentration of HA, the undissociated weak acid:
[HA] = 0.051 M - [A⁻] = 0.051 - 4.47 x 10⁻⁴ ≈ 0.0505 M
Now, we can use the Ka formula:
Ka = (4.47 x 10⁻⁴)² / 0.0505 ≈ 3.98 x 10⁻⁵
Therefore, the Ka of the acid is approximately 3.98 x 10⁻⁵.
Learn more about pH here: https://brainly.com/question/26424076
#SPJ11
I desperately need help. Need an answer fast though.
The weight of the oxygen that will react with 3.1 g of Bi is 0.356 g
The equation given is
4Bi + 3O₂ → 2Bi₂O₃
Using Stoichiometry, the branch of chemistry dealing with the relationship between the mass of substrates and products
Thus, 4 moles of Bi reacts with 3 moles of oxygen
4 moles of Bi = 4 * 209
= 836 g
3 moles of oxygen = 3 * 32
= 96 g
Thus 1 g of Bi requires = 96/836 = 0.11 g of oxygen
3.1 g of Bi requires = 0.11 * 3.1 = 0.356 g of oxygen
Learn more about Stoichiometry:
https://brainly.com/question/30641314
#SPJ1
a molecule containing a central atom with sp3 hybridization has a(n) ________ electron geometry. a) linear b) trigonal pyramidal c) seesaw d) tetrahedral e) bent 4) using the vse
A molecule with a central atom exhibiting sp3 hybridization has a tetrahedral electron geometry.
Option (D)
This is because the sp3 hybridization involves the combination of one s and three p orbitals, resulting in four hybrid orbitals arranged in a tetrahedral geometry around the central atom. Each of these hybrid orbitals can accommodate a pair of electrons, which gives rise to the tetrahedral electron geometry.
The VSEPR (Valence Shell Electron Pair Repulsion) theory is a useful tool for predicting the shape of molecules based on their electron pair geometry. According to this theory, electron pairs repel each other and tend to stay as far apart as possible, leading to specific molecular geometries. For a molecule with a tetrahedral electron geometry, the VSEPR model predicts a corresponding tetrahedral molecular shape.
It is important to note that while the electron geometry is tetrahedral, the molecular shape may differ depending on the presence of lone pairs of electrons. For example, a tetrahedral electron geometry with one lone pair would result in a trigonal pyramidal molecular shape, while a tetrahedral electron geometry with two lone pairs would result in a bent molecular shape. Option (D)
For such more questions on hybridization
https://brainly.com/question/15088849
#SPJ11
A molecule with a central atom exhibiting sp3 hybridization has a tetrahedral electron geometry. Option (D)
This is because the sp3 hybridization involves the combination of one s and three p orbitals, resulting in four hybrid orbitals arranged in a tetrahedral geometry around the central atom. Each of these hybrid orbitals can accommodate a pair of electrons, which gives rise to the tetrahedral electron geometry.
The VSEPR (Valence Shell Electron Pair Repulsion) theory is a useful tool for predicting the shape of molecules based on their electron pair geometry. According to this theory, electron pairs repel each other and tend to stay as far apart as possible, leading to specific molecular geometries. For a molecule with a tetrahedral electron geometry, the VSEPR model predicts a corresponding tetrahedral molecular shape.
It is important to note that while the electron geometry is tetrahedral, the emolecular shap may differ depending on the presence of lone pairs of electrons. For example, a tetrahedral electron geometry with one lone pair would result in a trigonal pyramidal molecular shape, while a tetrahedral electron geometry with two lone pairs would result in a bent molecular shape. Option (D)
Learn more about hybridization here:
brainly.com/question/15088849
#SPJ11
How many grams of oxygen are needed to combust 20. 0 grams of propane (C3H8) according to the reaction below?
C3H8+5O2⟶3CO2+4H2O
Approximately 72.48 grams of oxygen are needed to combust 20.0 grams of propane.To determine the amount of oxygen required to combust 20.0 grams of propane (C3H8), we need to use the stoichiometry of the balanced equation.
The balanced equation tells us that 1 mole of propane (C3H8) reacts with 5 moles of oxygen (O2) to produce 3 moles of carbon dioxide (CO2) and 4 moles of water (H2O).
First, we need to calculate the number of moles of propane in 20.0 grams. The molar mass of propane (C3H8) is 44.1 grams/mol (3 carbon atoms + 8 hydrogen atoms).
Moles of propane = mass / molar mass
Moles of propane = 20.0 g / 44.1 g/mol ≈ 0.453 mol
According to the stoichiometry of the balanced equation, 1 mole of propane requires 5 moles of oxygen.
Moles of oxygen = 5 * moles of propane
Moles of oxygen = 5 * 0.453 mol = 2.265 mol
Finally, we can calculate the mass of oxygen needed using its molar mass, which is 32.0 grams/mol.
Mass of oxygen = moles of oxygen * molar mass
Mass of oxygen = 2.265 mol * 32.0 g/mol ≈ 72.48 g
Therefore, approximately 72.48 grams of oxygen are needed to combust 20.0 grams of propane.
To learn more about oxygen click here:
brainly.com/question/14340538
#SPJ11
Use the following data to estimate ΔH⁰f for potassium bromide.
K(s) + 1/2 Br2(g) → KBr(s)
Lattice energy −691 kJ/mol
Ionization energy for K 419 kJ/mol
Electron affinity of Br −325 kJ/mol
Bond energy of Br2 193 kJ/mol
Enthalpy of sublimation for K 90. kJ/mol
The estimated ΔH⁰f for potassium bromide is 734 kJ/mol.
To estimate ΔH⁰f for potassium bromide, we need to consider the formation of KBr from its constituent elements in their standard states.
The equation for the formation of KBr from K and Br2 is:
K(s) + 1/2 Br2(g) → KBr(s)
We can use the Hess's Law to calculate the standard enthalpy change of this reaction.
ΔH⁰f = ΔH⁰f (KBr) - [ΔH⁰f (K) + 1/2 ΔH⁰f (Br2)]
We need to find the enthalpies of formation for KBr, K, and Br2.
The enthalpy of formation of KBr is equal to the negative of the lattice energy of KBr.
ΔH⁰f (KBr) = -(-691 kJ/mol) = 691 kJ/mol
The enthalpy of formation of K is equal to the negative of its enthalpy of sublimation and ionization energy.
ΔH⁰f (K) = -[90 kJ/mol + 419 kJ/mol] = -509 kJ/mol
The enthalpy of formation of Br2 is equal to the sum of its bond energy and electron affinity.
ΔH⁰f (Br2) = 193 kJ/mol + (-325 kJ/mol) = -132 kJ/mol
Substituting these values into the equation for ΔH⁰f , we get:
ΔH⁰f = 691 kJ/mol - [-509 kJ/mol + 1/2(-132 kJ/mol)]
ΔH⁰f = 691 kJ/mol + 43 kJ/mol
ΔH⁰f = 734 kJ/mol
Therefore, the estimated ΔH⁰f for potassium bromide is 734 kJ/mol.
To know more about lattice visit:
https://brainly.com/question/29774529
#SPJ11
An ideal gas is contained in a piston-cylinder device undergoes a power cycle as follows:
1-2 isentropic compression from initial temp of 20 degrees Celsius with a compression ratio of r = 5
2-3 constant pressure heat addition
3-1 constant volume heat rejection
The gas has constant specific heats with Cv=0.7kJ/kg-K and R=0.3kJ/kg-K
a) Determine the heat and work interactions for each process in kJ/kg.
b) Determine the cycle thermal efficiency.
c) Obtain the expression for the cycle thermal efficiency as a function of the compression ratio r and ratio of specific heats k.
Thermal Efficiency:
(a) Process 1-2: Work = Cv(T2-T1) / (1-[tex]r^{(1-k)[/tex]), Heat = Cv(T2-T1) / ([tex]r^{(1-k)[/tex]-1).
Process 2-3: Work = Cp(T3-T2), Heat = Cp(T3-T2). Process 3-1: Work = 0, Heat = Cv(T1-T3).
(b) Cycle thermal efficiency (η) = (Work1-2 - Work3-1) / (Heat2-3 + Heat3-1).
(c) η = 1 - (1 /[tex]r^{(1-k)[/tex]).
a) To determine the heat and work interactions for each process, we'll use the following equations:
For process 1-2 (isentropic compression):
1-2 isentropic compression follows the equation: P1/P2 = [tex](V2/V1)^{(k-1)[/tex], where k is the ratio of specific heats.
Since we know the compression ratio r = 5, V2/V1 = r. Rearranging the equation, we get P2/P1 =[tex]r^{-(k-1).[/tex]
The work interaction for process 1-2 is given by W1-2 = Cv(T2 - T1) / (1 - [tex]r^{(1-k)[/tex]).
The heat interaction for process 1-2 is given by Q1-2 = Cv(T2 - T1) / ([tex]r^{(k-1)[/tex] - 1).
For process 2-3 (constant pressure heat addition):
The work interaction for process 2-3 is given by W2-3 = Cp(T3 - T2).
The heat interaction for process 2-3 is given by Q2-3 = Cp(T3 - T2).
For process 3-1 (constant volume heat rejection):
The work interaction for process 3-1 is given by W3-1 = 0 (constant volume process).
The heat interaction for process 3-1 is given by Q3-1 = Cv(T1 - T3).
b) The cycle thermal efficiency (η) is given by the equation:
η = (net work output) / (heat input)
Since it's a power cycle, the net work output is the difference between the work interactions for processes 1-2 and 3-1:
Net work output = W1-2 - W3-1
The heat input is the sum of the heat interactions for processes 2-3 and 3-1:
Heat input = Q2-3 + Q3-1
c) The expression for the cycle thermal efficiency in terms of the compression ratio r and ratio of specific heats k is:
η = 1 - (1 /[tex]r^{(k-1)[/tex])
These equations can be used with the given values of temperature to calculate the desired values.
For more such questions on Heat, click on:
https://brainly.com/question/30738335
#SPJ11
a) The heat and work interactions for each process in kJ/kg are:
- Process 1-2: [tex]Q12 = 0, W12 = -30.69 kJ/kg[/tex]
- Process 2-3:[tex]Q23 = 21.48 kJ/kg, W23 = 0[/tex]
- Process 3-1: [tex]Q31 = -15.04 kJ/kg, W31 = 0[/tex]
b) The cycle thermal efficiency is given by:
ηth = (Wnet) / (Qin)
where [tex]Wnet = W12 + W23 and Qin = Q23 = 21.48 kJ/kg[/tex]
Thus, [tex]ηth = (W12 + W23) / Q23 = 0.285 or 28.5%.[/tex]
c) The expression for the cycle thermal efficiency as a function of the compression ratio r and ratio of specific heats k is:
[tex]ηth = 1 - (1/r)^(k-1)[/tex]
In this power cycle, the gas undergoes three processes: isentropic compression, constant pressure heat addition, and constant volume heat rejection. The heat and work interactions for each process can be calculated using the given information and the first law of thermodynamics. The cycle thermal efficiency is the ratio of the net work output to the heat input, and it is a measure of the cycle's efficiency in converting heat into work. Finally, the expression for the cycle thermal efficiency as a function of the compression ratio r and ratio of specific heats k is derived using the properties of the ideal gas and the equations for the specific heats. This expression can be used to analyze and optimize the performance of similar power cycles.
Learn more about Heat here :
brainly.com/question/30738335
#SPJ11
The complex ion [Cr(CN)6]4— is diamagnetic and has a low-spin d-electron configuration. How many unpaired electrons does this complex ion have?
Select one:
a. two unpaired electrons
b. one unpaired electrons
c. four unpaired electrons
d. no unpaired electrons
e. three unpaired electrons
The complex ion [Cr(CN)6]4— is diamagnetic which means that all of its electrons are paired. The low-spin d-electron configuration suggests that the electrons prefer to occupy the lower energy d-orbitals before pairing up.
In this configuration, the t2g orbitals are completely filled and there are no electrons in the eg orbitals. Therefore, the number of unpaired electrons is zero, which is option d. It is important to note that the configuration and bonding of this complex ion are quite complex and require a thorough understanding of coordination chemistry. Nonetheless, it is essential to have a grasp of the concepts to accurately answer questions related to this topic. Answering more than 100 words, we can say that the configuration and bonding of this complex ion involve the formation of coordination bonds between the central chromium atom and the six cyanide ligands. The resulting geometry is octahedral, and the electrons occupy different energy levels based on their respective orbitals.
To know more about configuration visit:
https://brainly.com/question/13410673
#SPJ11
using the provided data, determine the temperatures at which the following hypothetical reaction will be nonspontaneous under standard conditions a b → 2c d △s°rxn = -295.4 j/k △h°rxn = 100.4 kj
The reaction will be nonspontaneous at temperatures above 339.73 K under standard conditions.
To determine the temperatures at which the hypothetical reaction (a b → 2c d) will be nonspontaneous under standard conditions, we need to analyze the given data: ΔS°rxn = -295.4 J/K and ΔH°rxn = 100.4 kJ.
First, let's convert ΔH°rxn to J/mol for consistency: ΔH°rxn = 100.4 kJ * 1000 J/kJ = 100400 J/mol.
Now we'll use the Gibbs Free Energy equation: ΔG°rxn = ΔH°rxn - TΔS°rxn. The reaction will be nonspontaneous if ΔG°rxn > 0.
So, we need to find the temperature (T) at which ΔG°rxn > 0:
0 < ΔH°rxn - TΔS°rxn
0 < 100400 J/mol - T(-295.4 J/K)
T > 100400 J/mol / 295.4 J/K
T > 339.73 K
Therefore, the reaction will be nonspontaneous at temperatures above 339.73 K under standard conditions.
To learn more about energy, refer below:
https://brainly.com/question/11399976
#SPJ11
explain why the lattice energy of mgs is approximately 4 times as large as that of nacl.
The lattice energy of MgS is approximately 4 times as large as that of NaCl due to the difference in the charges and sizes of the ions involved in the formation of these compounds.
Lattice energy is the energy required to separate a mole of an ionic solid into its gaseous ions. It is directly related to the charges of the ions and inversely related to the distance between them. The Born-Lande equation can be used to calculate the lattice energy, and it shows that lattice energy is proportional to the product of the charges of the ions (Q1 * Q2) and inversely proportional to the sum of their radii (r1 + r2).
In the case of NaCl, the ions involved are Na+ and Cl- with charges of +1 and -1, respectively. On the other hand, MgS is formed by Mg2+ and S2- ions, which have charges of +2 and -2. When comparing the charges, MgS has a product of charges (Q1 * Q2) that is 4 times greater than that of NaCl.
Furthermore, the size of the ions plays a role as well. While Mg2+ and Na+ have similar radii, S2- is slightly larger than Cl-. However, this difference is not significant enough to offset the impact of the charges.
The lattice energy of MgS is approximately 4 times as large as that of NaCl primarily because of the difference in the charges of the ions, with a smaller contribution from the difference in the ionic radii.
To know more about lattice energy, click here
https://brainly.com/question/31730061
#SPJ11
what is the volume of a 6.21 g sample of chloroform (d = 1.49 g/ml)?
The volume of a 6.21 g sample of chloroform with a density (d) of 1.49 g/ml is 4.16 ml.
We can use the formula:
density = mass/volume
to find the volume of the chloroform sample.
Rearranging the formula, we get:
volume = mass/density
Substituting the given values, we get:
volume = 6.21 g / 1.49 g/ml
Simplifying the expression, we get:
volume = 4.16 ml
Therefore, the volume of the chloroform sample is 4.16 ml.
Chloroform is a colorless, heavy, and sweet-smelling liquid that is used as a solvent and in the production of refrigerants and propellants. It is also used as a general anesthetic and in the production of various pharmaceuticals and agricultural chemicals. Chloroform is denser than water, with a density of 1.49 g/mL at room temperature. The density of a substance is defined as its mass per unit volume, and it is usually expressed in grams per milliliter (g/mL) or grams per cubic centimeter (g/cm³). The volume of a substance can be calculated by dividing its mass by its density. In the given problem, we used the mass of the chloroform sample and its density to calculate its volume.
learn more about Volume here:
https://brainly.com/question/17409636
#SPJ11
Starting with 1.550 g of potassium chlorate, a student releases 0.617 g of oxygen gas. If the calculated mass of oxygen gas is 0.607 g, what is the percent yield? A) 39.2% B) 39.8% C) 98.4% D) 102%
The percent yield can be calculated by dividing the actual yield (0.607 g) by the theoretical yield (0.617 g) and multiplying by 100. The percent yield is option(c) 98.4%.
Percent yield is a measure of the efficiency of a chemical reaction, representing the ratio of the actual yield to the theoretical yield expressed as a percentage. In this case, the theoretical yield is the calculated mass of oxygen gas, which is given as 0.617 g.
To calculate the percent yield, divide the actual yield (0.607 g) by the theoretical yield (0.617 g) and multiply by 100:
Percent yield = (Actual yield / Theoretical yield) * 100
= (0.607 g / 0.617 g) * 100
= 98.4%
Therefore, the percent yield is 98.4%, which means that 98.4% of the expected amount of oxygen gas was obtained in the reaction.
Learn more about chemical reaction here:
https://brainly.com/question/22817140
#SPJ11
Balance the neutralization reaction of phosphoric acid with magnesium hydroxide. States of matter are not needed. __ H3PO4 + __ Mg(OH)2 → ___
The balanced neutralization reaction of phosphoric acid with magnesium hydroxide is:
2 H3PO4 + 3 Mg(OH)2 → Mg3(PO4)2 + 6 H2O
In order to balance the neutralization reaction of phosphoric acid with magnesium hydroxide, we need to make sure that the number of atoms of each element is the same on both sides of the equation.
First, let's write the unbalanced equation:
H3PO4 + Mg(OH)2 →
We have one atom of phosphorus (P) on the left-hand side and none on the right-hand side, so we need to add a coefficient of 2 to the phosphoric acid to get 2 atoms of phosphorus:
2 H3PO4 + Mg(OH)2 →
Now we have 6 atoms of hydrogen (H) and 2 atoms of phosphorus (P) on the left-hand side, and 2 atoms of magnesium (Mg), 2 atoms of oxygen (O), and 2 atoms of hydrogen (H) on the right-hand side.
To balance the equation, we need to add a coefficient of 3 to magnesium hydroxide to get 6 atoms of hydrogen (H) on the right-hand side:
2 H3PO4 + 3 Mg(OH)2 →
Now we have 2 atoms of magnesium (Mg), 6 atoms of oxygen (O), and 6 atoms of hydrogen (H) on both sides of the equation. However, we also have 2 atoms of phosphorus (P) on the left-hand side and none on the right-hand side.
To balance this, we need to add a coefficient of 1 to magnesium phosphate:
2 H3PO4 + 3 Mg(OH)2 → Mg3(PO4)2 + 6 H2O
Now the equation is balanced, with 2 atoms of phosphorus (P), 3 atoms of magnesium (Mg), 8 atoms of oxygen (O), and 12 atoms of hydrogen (H) on both sides of the equation.
learn more about phosphoric acid
https://brainly.com/question/14812997
#SPJ11
What saturation will 60g of KNO3 have at 50C?
Answer:
100
Explanation:
Calculate the pH of a solution containing 0.0347 M glutaric acid and 0.020 M potassium hydrogen glutarate. The Ka values for glutaric acid are 4.52 × 10-5 (Ka1) and 3.78 × 10-6 (Ka2).
The solution contains 0.0347 M glutaric acid and 0.020 M potassium hydrogen glutarate, and has a pH of 3.16. The Ka values of glutaric acid were used to calculate the concentration of [H+] in the solution, and the pH was determined using the equation pH = -log[H+].
To solve this problem, we first need to determine which acid dissociation reactions are occurring in the solution. Glutaric acid has two acid dissociation constants, so we need to consider both reactions:
Ka1 = [H+][C5H8O4-]/[C5H9O4-]
Ka2 = [H+][C5H7O4-]/[C5H8O4-]
We can assume that the dissociation of glutaric acid is minimal, so we can simplify our calculations by assuming that [C5H9O4-] ≈ [C5H8O4-]. Therefore, we can write the following equation:
Ka1 = [H+]^2/[C5H8O4-]
Rearranging this equation gives us:
[H+] = sqrt(Ka1*[C5H8O4-])
Now, we need to calculate the concentrations of glutaric acid and potassium hydrogen glutarate in the solution. We know that the total concentration of acid is 0.0347 M + 0.020 M = 0.0547 M. Therefore, the concentration of [C5H8O4-] is 0.020 M. We can assume that the potassium hydrogen glutarate does not contribute to the acidity of the solution, so we can ignore it in our calculations.
Plugging in our values, we get:
[H+] = sqrt(4.52 × 10^-5 * 0.020) = 6.83 × 10^-4 M
The pH of the solution can be calculated using the following equation:
pH = -log[H+]
pH = -log(6.83 × 10^-4) = 3.16
Therefore, the pH of the solution is 3.16.
In conclusion, the solution contains 0.0347 M glutaric acid and 0.020 M potassium hydrogen glutarate, and has a pH of 3.16. The Ka values of glutaric acid were used to calculate the concentration of [H+] in the solution, and the pH was determined using the equation pH = -log[H+].
To know more about solutions visit: https://brainly.com/question/30620786
#SPJ11
Here are some redox reactions. Calculate their cell potentials and indicate whether they are spontaneous or not (or one of the other choices). Use the reduction potential tables as needed (a) Cu(s) + Fe2+(aq) → Cu2+(aq) + Fe(s) Cell potential = The reaction is No idea Spontaneous Insufficient data to determine this With this potential, this reaction cannot occur Non-spontaneous (b) H2(g) + 2 Ag+(aq) → 2 H+(aq) + 2 Ag(s) Cell potential = The reaction is This reaction does not occur to any significant extent Insufficient data to determine No idea Non-spontaneous Spontaneous (c) Choose the strongest reducing agent among all the reactants and products in parts (a) and (b) Ag (aq) Cu(s) Ht(aq) Fe2+(aq) H2(g) Ag(s) Fe(s)
The cell potentials and spontaneity of the given redox reactions are as follows:
(a) Cell potential = +0.78 V, Reaction is spontaneous
(b) Cell potential = +0.80 V, Reaction is spontaneous.
(c) The strongest reducing agent is Ag(aq).
What is the spontaneity and cell potential of the provided redox reactions, and which species is the strongest reducing agent?The cell potentials and spontaneity of the given redox reactions were determined using reduction potential tables. In the first reaction, Cu(s) + [tex]Fe_2+(aq) → Cu_2+(aq) + Fe(s)[/tex], the calculated cell potential is +0.78 V, indicating that the reaction is spontaneous. Conversely, in the second reaction, [tex]H_2[/tex](g) + 2 Ag+(aq) → 2 H+(aq) + 2 Ag(s), the cell potential is +0.80 V, confirming its spontaneity. Among all the reactants and products in both reactions, Ag(aq) is identified as the strongest reducing agent, based on its highest reduction potential of +0.80 V
Redox reactions involve the transfer of electrons between species, and their spontaneity can be determined by calculating the cell potential. The positive cell potential indicates a spontaneous reaction, while a negative value signifies a non-spontaneous one. Reduction potential tables provide the necessary information to calculate the cell potential. The stronger reducing agent has a higher reduction potential, indicating its ability to donate electrons more readily. Understanding these concepts helps predict the feasibility and directionality of redox reactions.
Learn more about Redox reaction
brainly.com/question/28300253
#SPJ11
does a charged particle always moves in uniform circular motion if it's motion is initially perpendicular to the magnetic field.
Yes, a charged particle will move in uniform circular motion when its motion is initially perpendicular to the magnetic field.
1. When the charged particle enters the magnetic field, it experiences a magnetic force due to the interaction between its charge and the magnetic field.
2. This magnetic force is always perpendicular to both the velocity of the particle and the direction of the magnetic field.
3. Since the magnetic force is always perpendicular to the particle's motion, it causes the particle to change direction, but not speed.
4. As a result, the charged particle follows a circular path, with the magnetic force acting as the centripetal force, keeping it in uniform circular motion.
So, a charged particle with motion initially perpendicular to the magnetic field will indeed move in uniform circular motion due to the magnetic force acting on it.
Learn more about the circular motion here,
https://brainly.com/question/29312275
#SPJ11
[Co(NH3)5(ONO)]Cl2 and [Co(NH3)5(NO2)]Cl2 form a pair of structural isomers. Explain why you would see a different wavelength maximum for ONO- and NO2-.
The complex ions [Co(NH3)5(ONO)]2+ and [Co(NH3)5(NO2)]2+ are isomers because they have the same chemical formula but different bonding arrangements.
The difference in bonding arises from the different geometries of the two ligands, which in turn affects the electronic structure of the complex.
The NO2- ligand is a strong-field ligand, which means that it forms a bond with the metal ion that is primarily covalent in nature. This leads to a larger splitting of the d orbitals of the metal ion, resulting in a lower energy of the d-orbital electrons. As a consequence, the absorption spectrum of the [Co(NH3)5(NO2)]2+ complex will have a lower wavelength maximum.
On the other hand, the ONO- ligand is a weak-field ligand, which forms a predominantly ionic bond with the metal ion. This results in a smaller splitting of the d orbitals and a higher energy of the d-orbital electrons. As a result, the absorption spectrum of the [Co(NH3)5(ONO)]2+ complex will have a higher wavelength maximum.
In summary, the difference in bonding between the two isomers leads to different electronic structures and therefore different absorption spectra, with the [Co(NH3)5(NO2)]2+ complex having a lower wavelength maximum and the [Co(NH3)5(ONO)]2+ complex having a higher wavelength maximum.
To know more about isomers:
https://brainly.com/question/13422357
#SPJ11
The density of a 3.539 M HNO3 aqueous solution is 1.150 g/ml. at 20°C. Calculate the molality of the solution. The molar mass of HNO3 is 63.02 g/mol. a. 3.946 m b. 3.818 m O c. 5.252 m O d. 3.077 m Moving to another question will save this response.
The molality of the 3.539 M HNO3 aqueous solution is 0.22299 m.
To calculate the molality of the 3.539 M HNO3 aqueous solution, we need to first convert the given density from g/mL to kg/L. We can do this by dividing 1.150 g/mL by 1000, giving us 0.001150 kg/L.
Next, we can use the formula for molality, which is moles of solute per kilogram of solvent. We know the molar mass of HNO3 is 63.02 g/mol, so we can calculate the moles of HNO3 in 1 L of solution as follows:
3.539 moles/L x 63.02 g/mol = 222.99 g/L
To convert this to kg/L, we divide by 1000:
222.99 g/L ÷ 1000 = 0.22299 kg/L
Finally, we can calculate the molality by dividing the moles of solute by the kilograms of solvent:
molality = 0.22299 mol ÷ 1 kg = 0.22299 m
Therefore, the molality of the 3.539 M HNO3 aqueous solution is 0.22299 m. None of the answer choices match, so there may be a mistake in the question or in the answer choices provided.
For more question on aqueous solution
https://brainly.com/question/19587902
#SPJ11
The molality of the solution, given that the density of the 3.539 M HNO₃ aqueous solution is 1.150 g/mL at 20 °C is 3.818 M (option B)
How do I determine the molality of the solution?First, we shall determine the mass of the solution. Details below:
Density of solution = 1.150 g/mLVolume of solution = 1000 mLMass of solution =?Mass of solution = density × volume
Mass of solution = 1.15 × 1000
Mass of solution = 1150 g
Next, we shall obtain the mole of HNO₃ in the solution. Details below:
Molarity of HNO₃ = 3.539 MVolume of solution = 1000 mL = 1 LMole of HNO₃ =?Mole = molarity × volume
Mole of HNO₃ = 3.539 × 1
Mole of HNO₃ = 3.539 moles
Next, we shall obtain the mass of the water. Details below:
Mole of HNO₃ (n) = 3.539 molesMolar mass of HNO₃ (M) = 63.02 g/molMass of HNO₃ = n × M = 3.539 × 63.02 = 223.03 gMass of solution = 1150 gMass of water =?Mass of water = Mass of solution - Mass of HNO₃
Mass of water = 1150 - 223.03
Mass of water = 926.97 g
Finally, we shall determine the molality of the solution. Details below:
Mole of HNO₃ = 3.539 molesMass of water = 926.97 g = 926.97 / 1000 = 0.92697 KgMolality of solution =?Molality = mole / mass of water (in Kg)
Molality of solution = 3.539 / 0.92697
Molality of solution = 3.818 M (option B)
Learn more about molality:
https://brainly.com/question/26921570
#SPJ4
2.66 g of a gas that occupies 1.98 l at 0 ∘c and 1.00 atm (stp). express your answer with the appropriate units.
The given gas has a volume of 1.98 L at STP, which means it is at a temperature of 0°C (273.15 K) and a pressure of 1.00 atm. To calculate the number of moles of gas present, we need to use the STP conditions.
First, we can calculate the number of moles of gas present at STP using the ideal gas law:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature. At STP, P = 1 atm, V = 22.4 L (the molar volume at STP), R = 0.08206 L atm mol^-1 K^-1, and T = 273.15 K.
Plugging in the values, we get:
1 atm x 22.4 L = n x 0.08206 L atm mol^-1 K^-1 x 273.15 K
n = (1 atm x 22.4 L) / (0.08206 L atm mol^-1 K^-1 x 273.15 K)
n = 1.00 mol
This means that 1 mole of the gas occupies 22.4 L at STP.
Now, we can use the number of moles to find the mass of the gas present. The given mass is 2.66 g, so:
mass = n x molar mass
where molar mass is the mass of one mole of the gas. Let's assume the gas is an ideal gas, and use the ideal gas equation to calculate its molar mass:
PV = nRT
n = PV / RT
n = (1 atm x 1.98 L) / (0.08206 L atm mol^-1 K^-1 x 273.15 K)
n = 0.0878 mol
Now we can calculate the molar mass:
molar mass = mass / n
molar mass = 2.66 g / 0.0878 mol
molar mass = 30.31 g mol^-1
Therefore, the gas has a molar mass of 30.31 g mol^-1.
Note that the appropriate units for volume are liters (L), and for pressure are atmospheres (atm). The appropriate units for mass are grams (g), and for molar mass are grams per mole (g mol^-1).
learn more about STP
https://brainly.in/question/4028492?referrer=searchResults
#SPJ11
a 1.3×10−6mol sample of sr(oh)2 is dissolved in water to make up 25.0 ml of solution. what is the ph of the solution at 25.0∘c
The pH of the solution is 10.98 at 25°C.
When Sr(OH)2 is dissolved in water, it dissociates to form Sr2+ and 2OH- ions. The concentration of each ion in the resulting solution can be calculated using the initial amount of Sr(OH)2 and the volume of the solution.
First, we need to determine the concentration of Sr2+ and OH- ions in the solution. Since each Sr(OH)2 molecule dissociates into two OH- ions and one Sr2+ ion, the concentration of Sr2+ in the solution will be half of the concentration of OH- ions.
The initial amount of Sr(OH)2 in the solution is:
moles = 1.3×10^-6 mol
The volume of the solution is:
volume = 25.0 ml = 0.0250 L
Using this information, we can calculate the concentration of OH- ions:
[OH-] = 2 × moles / volume
= 2 × 1.3×10^-6 mol / 0.0250 L
= 1.04 × 10^-4 M
Since the concentration of Sr2+ ions is half that of OH- ions, we have:
[Sr2+] = 0.5 × [OH-]
= 0.5 × 1.04 × 10^-4 M
= 5.20 × 10^-5 M
Now, we can use the ion product constant for water (Kw) to calculate the pH of the solution:
Kw = [H+][OH-]
= 1.0 × 10^-14 at 25°C
At 25°C, Kw = 1.0 × 10^-14, so:
pH = -log[H+]
= -log(Kw/[OH-])
= -log(1.0 × 10^-14 / 1.04 × 10^-4)
= 10.98
Therefore, the pH of the solution is 10.98 at 25°C.
To learn more about pH refer here:
https://brainly.com/question/15289714
#SPJ11
You are in air looking at an angle into a glass window with an index of refraction of 1.6. What is the minimum angle (relative to straight into the window) at which you will see total internal reflection? O 38.7° 0 45.0° O 51.3° Total internal reflection will not occur in this situation U
26.3 degrees is the minimum angle at which total internal reflection will occur
To determine the minimum angle for total internal reflection in this situation, we need to use Snell's law and the concept of critical angle. The critical angle is the angle of incidence at which light is refracted at an angle of 90 degrees and no light is transmitted, resulting in total internal reflection.
The formula for critical angle is:
sin θc = n2/n1
Where θc is the critical angle, n1 is the index of refraction of the medium the light is coming from (air in this case), and n2 is the index of refraction of the medium the light is entering (the glass window with an index of refraction of 1.6).
Plugging in the values, we get:
sin θc = 1.6/1
sin θc = 1.6
θc = sin^-1 (1.6)
θc ≈ 63.7°
This means that any angle of incidence greater than 63.7° will result in total internal reflection. However, we are looking for the minimum angle, so we subtract this value from 90 degrees (the angle of incidence where light is refracted at an angle of 0 degrees and goes straight into the glass):
90° - θc = 90° - 63.7°
Minimum angle = 26.3°
Therefore, the minimum angle at which total internal reflection will occur in this situation is 26.3 degrees.
More on internal reflection: https://brainly.com/question/31136439
#SPJ11
) which of the following is the most activating in electrophilic aromatic substitution? a.-no2 b.-nhcoch3 c.-cn d.-nh2
The most activating group in electrophilic aromatic substitution is (d) -NH[tex]_{2}[/tex].
In electrophilic aromatic substitution, the activating effect of a group is determined by its ability to donate electron density to the aromatic ring, making it more nucleophilic and facilitating the reaction. Among the given options, -NH[tex]_{2}[/tex] (an amino group) is the strongest electron-donating group. The lone pair of electrons on the nitrogen atom can delocalize into the ring through resonance, increasing the electron density and making the ring more nucleophilic.
Option (d) -NH[tex]_{2}[/tex] is the correct answer.
You can learn more about electrophilic aromatic substitution at
https://brainly.com/question/14803468
#SPJ11
a mixture of 9 mol f2 and 4 moles of Sis allowed to react. This equation represents the reaction that takes place.3F2+S→SF6How many moles of F2remain after 3 moles of Shave reacted?
To answer this question, 3 moles of F2 will remain after 3 moles of S have reacted in this mixture of 9 mol F2 and 4 moles of S.
we first need to figure out how many moles of S will react with 9 moles of F2. From the balanced chemical equation, we see that for every 1 mole of S, 3 moles of F2 are required. So, for 4 moles of S, we would need 12 moles of F2.
Now that we know the amount of F2 required to react with all of the S, we can subtract the 3 moles of S that have reacted from the 9 moles of F2 that were originally present. This gives us:
9 moles F2 - 12 moles F2 (required to react with 4 moles S) = -3 moles F2
This negative result tells us that there is not enough S to react with all of the F2, and therefore, some of the F2 will remain unreacted. Specifically, there will be 3 moles of F2 remaining after 3 moles of S have reacted.
In conclusion, 3 moles of F2 will remain after 3 moles of S have reacted in this mixture of 9 mol F2 and 4 moles of S.
To know more about moles visit :
https://brainly.com/question/14676971
#SPJ11