This is an exothermic reaction because it releases energy in the form of heat (181kJ). When an exothermic reaction occurs, energy is released into the environment.
What is exothermic reaction?
An exothermic reaction is a chemical reaction that releases energy in the form of heat. This heat is released into the environment, making the surrounding area warmer.
Exothermic reactions can occur naturally and can also be artificially induced. Examples of exothermic reactions include burning fuels, neutralization reactions, and even certain biological processes.
To learn abot more exothermic reaction.
https://brainly.com/question/6357350
#SPJ1
Written problem: I find that I can blow 1000 cm3 of air through a drinking straw in 1.3 s. The diameter of the straw is 5 mm. Find the velocity of the air through the straw.
Answer:
Below
Explanation:
Diameter of straw = .5 cm then the radius = .25 cm
AREA of the straw = pi r^2 = pi ( .25 cm)^2 = .19635 cm^2
Now we need to find the LENGTH necessary to have a volume of 1000 cm^3
1000 cm^3 = L * . 19635 cm^2
L = 5.092.958 cm <=== your blowing covers this distance in 1.3 s
5092.958 cm / 1.3 s = 3917.7 cm / s = 39.2 m/s
A boy exerts a force of 225 N on a lever (Links to an external site.) to raise a 1250 N rock a distance (Links to an external site.) of 0.13 m. If the lever is frictionless, how far did the boy have to move his end of the lever
If the lever is frictionless, to raise the rock a distance of 0.13 m, then the boy has to move the lever to 0.72 m.
An external force that acts upon an object results in a motion of the object, then it is called a work done upon the object by that force.
Given that the external force on a lever is 225 N and on a rock is 1250 N. The distance of motion by the rock is 0.13 m.
Hence the work done by the lever will be equivalent to the work done by the rock to move a particular distance.
Work (Lever) = Work (Rock)
F(lever) x D (lever) = F (rock) x D (rock)
225x D(lever)= 1250 x0.13
D(lever) is 0.72 m
Hence we can conclude that the distance of the motion by the lever is 0.72 m.
To know more about the work:
brainly.com/question/3902440.
#SPJ4
You are on an airplane traveling with a constant velocity at an altitude of 20,000 m. What is the acceleration of gravity at that altitude
Correct option is C) the acceleration of gravity at that altitude is 9.75m/s².
What is the gravity's acceleration?
The unit g stands for gravitational acceleration. At sea level, the standard value of g on earth's surface is 9.8 m/s2.
The following formula is used to determine the acceleration of gravity:
g= GM/r2
What G The general gravitational constant is what it is.
G is equal to 6.674x10⁻¹¹ Nm2/kg2, and M is the earth's mass:
M = 5.972x10²⁴kg
The radius of the earth plus the airplane's altitude, or r, is the distance from the earth's center in this case:
r = 6.37x10⁶ m + 20000 m equals 6.39x10⁶ m
Consequently, the acceleration in g is equal to:
(6.674x10⁻¹¹ Nm²/kg²)(5.972x10²⁴ kg) / (6.39x100m)₂
g = 9.75m/s²
To learn more about acceleration of gravity from given link
https://brainly.com/question/1528733
#SPJ4
Complete Question -
You are on an airplane traveling with a constant velocity at an altitude of 20,000m. What is the acceleration of gravity at that altitude? The earth's radius is 6.37 x 10^6m.. . A) 9.81 m/s^2. B) 9.78 m/s^2. C) 9.75 m/s^2. D) 9.72 m/s^2. E) 9.69 m/s^2.
The Law of Conservation of Energy states: Energy cannot be created or destroyed; it can be transformed fr
one form to another but the total amount of energy never changes. Car crashes can involve huge amounts
of energy. How does the crashworthiness of the car affect the transfer and transformations of energy and
ultimately, protect the occupants?
The kinetic energy does the work that crushes the car’s crumple zones.
Conversion of collision energy Because the metal plastic deformation after the impact greatly increases the internal energy of the automobile, the majority of the kinetic energy in the collision process is turned into internal energy. Other types of kinetic energy are turned into heat energy, sound energy, and so on.
A serious vehicle accident can result in PTSD, acute anxiety, sadness, and crippling phobias. According to studies, crash-related mental traumas might have symptoms that continue up to a year following a car accident, especially in youngsters. Objects with potential energy, or stored energy, collide, and the energy transfers to kinetic energy, or the energy of an object in motion. This energy transfer from one to anotheanother
To learn more about Energy States to refer:
https://brainly.com/question/2289096
#SPJ1
prepare a list of various sources of energy that are used at your home .classify them into renewable and non renewable source of energy
The two energy sources that are used in homes the most are electricity and natural gas. Natural gas is a non-renewable energy source, whereas electricity that is generated from unconventional sources is.
What are some examples of renewable and non-renewable energy sources?Sunlight, water, wind, and geothermal sources like hot springs and fumaroles are examples of renewable resources. Petroleum and coal are examples of fossil fuels that are non-renewable resources. The majority of renewable resources have small carbon footprints and low carbon emissions.
What are the top 5 energy-saving features for homes?A well-built and securely sealed thermal envelope, controlled ventilation, appropriately sized, high-efficiency heating and cooling systems, and energy-efficient doors, windows, and appliances are the essential components of the majority of energy-efficient homes, despite construction costs, options, and styles being different.
To learn more about renewable energy visit:
brainly.com/question/17373437
#SPJ1
From the viewpoint of an alien astronomer, how does Jupiter affect observations of our Sun?
a) It causes the Sun to move in a small ellipse with an orbital period of about 12 years.
b) It makes the Sun periodically get somewhat brighter.
c) It makes the Sun appear dimmer when viewed with infrared light.
d) It causes the Sun to move in a small ellipse in the sky, with the same ellipse repeated every night.
Jupiter affect observations of the Sun, from the viewpoint of an alien astronomer, by causing the Sun to move in a small ellipse with an orbital period of about twelve years. The correct option is option a.
Being the fifth closer planet to our Sun, Jupiter is the biggest planet in our Solar System. Jupiter is one of the gas giants in the Solar System.
From the Sun, Jupiter's average distance is about 480 million miles, and it takes nearly twelve years for Jupiter to make one revolution. Jupiter has a ring, albeit flat and small, like the rest of the gas giants. Jupiter's rotation is the fastest of all planets in the Solar System, rotating once on its axis every ten hours.
From the viewpoint of an alien astronomer outside our Solar System, the Sun will look as if it orbits Jupiter and takes 12 years to complete a revolution. Planets in general have orbits that are elliptical.
Learn more about Jupiter here: https://brainly.com/question/15044627.
#SPJ4
A cylindrical bucket of liquid (density rho) is rotated about its symmetry axis, which is vertical. If the angular velocity is ω, show that the pressure at a distance r from the rotation axis is P=P 0+ 21rhoω 2r 2where P 0 is the pressure at r=0,
Answer:
To derive the formula for the pressure at a distance r from the rotation axis, you can use the principle of hydrostatic equilibrium. This states that the pressure at a point in a fluid is equal in all directions and the net force on a fluid element is equal to zero.
Consider a small cylindrical element of fluid at a distance r from the rotation axis, as shown in the diagram below. The dimensions of the element are dr in the radial direction, 2πr in the circumferential direction, and h in the vertical direction. The weight of the element is equal to the product of its volume, density, and the acceleration due to gravity: W = (2πr)(dr)(h)(ρ)(g). The pressure at the top and bottom faces of the element is P + dP, where P is the pressure at the point and dP is a small change in pressure. The forces acting on the element are the weight of the element, the pressure force at the top face, and the pressure force at the bottom face.
[asy]
unitsize(2cm);
pair P1, P2, P3, P4;
P1 = (0,0);
P2 = (1,0);
P3 = (1,1);
P4 = (0,1);
draw((-0.5,0)--(1.5,0));
draw((0,-0.5)--(0,1.5));
draw(P1--P2--P3--P4--cycle);
draw((0.5,0)--(0.5,1));
draw((0.25,0)--(0.25,1));
draw((0.75,0)--(0.75,1));
label("$r$", (0.5,1.5), red);
label("$
A 10.0-g bullet is fired into a stationary block of wood having mass m 5 5.00 kg. The bullet imbeds into the block. The speed of the bullet-plus-wood combination immediately after the collision is 0.600 m/s. What was the original speed of the bullet
The original speed of the bullet was 300.6 m/s.
What is the best meaning of mass?A measure of the amount of matter contained in or constituting a physical body. In classical mechanics, the mass of an object is related to the force required to accelerate it and hence is related to its inertia, and is essential to Newton's laws of motion.
Given:
mV bi +MV wi =mV b +M Vwf
where m= mass of bullet =10 g=10^−2 ∣kg
M= mass of wood block =5 kg
V bI = initial mass of bullet
Vwi = initial mass of wood block and V bf =V wf
=0.06 m/s 10 −2 Vbi+0(10 −2 +5)0.6 V
bi = 10 −2 5.01×0.6 V
bi =300.6 m/s
To know more about mass visit:
brainly.com/question/15959704
#SPJ4
When there is no motion between objects, what is the relationship between the magnitude of the static friction, f, and the normal force, N?
The static friction and the normal force are related to each other as ≤.
Static friction is a force that prevents an item from moving. The friction encountered when persons attempt to move a stationary object on a surface without actually causing any relative motion between the body and the surface on which it is located. Static friction occurs between two fixed things, whereas kinetic friction occurs when two items move. Static friction varies while kinetic friction remains constant.
The normal force is the force exerted by surfaces to prevent solid objects from passing through them. A contact force is normal force. According to Newton's third law, this force on the platform must be followed by an equal and opposite force delivered to the man by the platform. This force is identical to the normal force.
To learn more about static friction and normal force, here
https://brainly.com/question/28980615
#SPJ4
Four particles with masses 4 kg, 4 kg, 4 kg, and 7 kg are connected by rigid rods of negligible mass as shown. Assume the system rotates in the xy plane about the z axis (origin, O) with an angular speed of 9 rad/s. Find the rotational energy of the system about the x axis.
The rotational Kinetic energy of the system about X axis is 24624 J.
Let the distance of the mass 4kg, from O is r1,
r = √(4² + 4²)
r = √32m
The distances of masses to the rotation axis is same -
say,
r1 = r2 = r3 =r4 = √32
Hence,
I = ∑ mi r1²
I = r² ∑(m1 + m + m3 + m4)
= 32(19)
I = 608 Kg m²
We know that rotational energy of system is given as,
K = 1/2 Iw²
Given,
W = 9 rad/sec
∴ K = 1/2 × 608 × 9²
K = 24624 J
To learn more about rotational Kinetic Energy from given link
https://brainly.com/question/13623190
#SPJ4
Classify these (x,y) coordinate pairs as a source point or a field point. Drag the appropriate items to their respective bins. the numbers in the picture are: (6,0) (0,8) (0,0) (0,-8)
The classification of the points in the picture of electric charges on a coordinate plane are;
Source points; (0, 8)c field is thr, (0, 0), (0, -8)Field poinrt; (6, 0)What is an electric field?An elecric field is the region or field which surrounds an electric charge, The value of an electric field is the force per unit charge within the field.
The specified points on the picture of the charges on the coordinate plane are;
(6, 0), (0, 8), (0, 0), (0, -8)
The location of the charges in the picture are;
Coordinates of the location of the charge, q₁ = (0, 8)
The coordinates of the location of the charge, q₂ = (0, 0)
Coordinates of the location of the charge, q₃ = (0, -8)
Coordinates of the location of the point, P = (6, 0)
A source point is the location of a source of electric charge, such as the charges, q₁, q₂ and q₃
The source points are locarted along tnhe y-axis, therefore, the source point are;
(0, 8), (0, 0), and (0, -8)
A field in physics is a region associated with a physical quantity, such as an electric or magnetic field, where the effect of the electric or magnetic field is experienced or felt
The field point is a point located away from the source point, The field point is a point where the effect of the field from the source is felt.
The field point is the point P(6, 0), that is located away from the charges, q₁, q₂, and q₃
Learn more about charges and electric field? https://brainly.com/question/14837739
#SPJ1
Is there ever a case where one of the two charges in Coulomb's Law experiences a different force magnitude than the other charge? Why or why not?
Answer:
Yes, there is a case where one of the two charges in Coulomb's Law experiences a different force magnitude than the other charge. Coulomb's Law states that the electric force between two charged particles is directly proportional to the product of the magnitudes of the charges and inversely proportional to the square of the distance between them. If the magnitudes of the charges or the distance between them changes, the force experienced by one of the charges will also change. For example, if one of the charges is doubled in magnitude while the other charge and the distance between them remain the same, the force experienced by the charge with the increased magnitude will also double.
Example: A ball rolls off a table 1.5 m high and lands 0.80 m away from the table.
(a) How long will the ball be in the air?
(b) What is the ball's initial horizontal velocity?
(c) What will be the ball's horizontal and vertical velocities when it hits the ground?
Answer:
Below
Explanation:
To fall 1.8 m the time will be found with :
d = 1/2 a t^2
1.5 = 1/2 ( 9.81) t^2 shows t = .55 s
in this .55 s it travels .8 m horizontally
Horizontal velocity = .8 m / .55 s = 1.45 m/s
When it hits the ground , horizontal velocity will still be 1.45 m/s
vertical velocity will be v = at = 9.81 m/s^2 * .55 = 5.42 m/s
What happens to the particles of a matter when heat is released and temperature becomes lower?
In the particles of a substance when heat is released and the temperature becomes lower are the particles will move more slowly.
A particle can vibrate due to heating so that the particle can be said to have kinetic energy. Kinetic energy itself is affected by the mass and speed of objects. The smaller the mass of an object, the greater its kinetic energy. The faster the particles vibrate, the greater their kinetic energy.
When a particle is heated, its temperature will rise and the particle will move fast because it gains kinetic energy. Meanwhile, when a particle loses heat, the temperature of the particle will decrease, this causes a decrease in the kinetic energy of the particle due to heat loss so that the particle moves slower.
Learn more about kinetic energy at:
https://brainly.com/question/26472013
#SPJ4
i need help plssssss
The three key words that have been replaced in the cross - section of a solar panel are:
R - Insulator S - Copper T - BlackThis means that Option A is correct.
What are some parts in a solar panel ?A solar panel, also known as a photovoltaic (PV) panel, is a device that converts sunlight into electricity. It is made up of several different parts that work together to generate electricity. Solar cells are made of silicon and are responsible for converting sunlight into electricity. They are usually arranged in a grid pattern on the panel.
The backsheet is the layer of material that sits on the back of the solar cells. It is responsible for protecting the back of the solar cells from moisture and other environmental factors. It is an insulator and is shown as R.
There are also the copper wires which heat the water and they are painted black as black absorbs heat better. These are labeled S and T respectively.
Find out more on solar panels at https://brainly.com/question/28996669
#SPJ1
5. Is the motion of the stars around Polaris (NCP) due to the __________rotation (daily motion) or ___________revolution (yearly motion) of Earth
The motion of the stars around Polaris (NCP) is due to rotation (daily motion) of Earth.
Polaris is a star in Ursa Minor's northern circumpolar constellation. It is known as Ursae Minoris and is also known as the North Star or Pole Star. With an apparent brightness of roughly 1.98, it is the brightest star in the constellation and may be seen with the bare eyes at night. The star's location is less than one degree from the north celestial pole, making it the current northern pole star. The star's constant location in the Northern Sky makes it ideal for navigation.
Its distance is considered as part of the cosmic distance ladder since it is the nearest Cepheid variable. The updated Hipparcos stellar parallax distance to Polaris is approximately 433 light-years (133 parsecs), whereas the successor mission Gaia distance is around 448 light-years (137 parsecs). Other techniques of calculation produce significantly disparate results.
To learn more about Polaris, here
https://brainly.com/question/29036362
#SPJ4
i need help with this can give a heart or like if its right
The new electrostatic force between the charges, given that q₁ is reduced to 1/2q₁ and q₂ is tripped is 3/2Fₑ (Option C)
How do I determine the new electrostatic force?First, we shall determine the initial electrostatic force between the charges. Details below:
First Charge (q₁) = q₁second Charge (q₂) = q₂Electric constant (K) = KDistance apart (r) = rInitial electrostatic force (F) = Fₑ =?F = Kq₁q₂ / r²
Fₑ = Kq₁q₂ / r²
Finall, we shall determine the new electrostatic force. The is illustrated below:
First Charge (q₁) = 1/2q₁second Charge (q₂) = 3q₂Electric constant (K) = KDistance apart (r) = rNew electrostatic force (F) =?F = Kq₁q₂ / r²
F = (K × 1/2q₁ × 3q₂) / r²
F = 3/2Kq₁q₂ / r²
But,
Fₑ = Kq₁q₂ / r²
Thus
F = 3/2Fₑ
Thus, we can conclude that the new electrostatic force is 3/2Fₑ (Option C)
Learn more about force between charges:
https://brainly.com/question/28569085
#SPJ1
An electric heater draws a constant current of 6 amp, with an applied voltage of 220 V, for 24 h. Determine the instantaneous electric power provided to the heater, in kW
The instantaneous electric power provided to the heater will be 1.32 kW.
Electric power can be defined as the rate by which an electric circuit transfers the electrical energy. An electric heater is drawing a constant current which is equal to 6 ampere with an applied voltage of 220 volts for a duration of 24 hours.
To calculate the instantaneous power supplied to the electric heater,
Power = Voltage × Current
P = V × I
P = 220 × 6
P = 1320 W
To convert it into kW, we divide the value by 10³
= 1320/10³ = 1.32 kW
To know more about electric power here
https://brainly.com/question/1125269
#SPJ4
A mass of 0.343 kg moves down a 5 meter ramp in 5.8 seconds. What is its velocity and kinetic energy
According to the given information the velocity is .0148 m/s2 and the kinetic energy is 3.78 J.
What is the straightforward meaning of velocity?The movement that an item or particle experiences with regard to time is expressed vectorially as velocity. One metre per second (m/s) is the accepted unit of flow speed (also known as speed).
What does velocity in SI mean?The metric speed unit is the meter per minute (m/s). A different way to express velocity magnitude is in centimeters per second (cm/s).
vilocity = 5/(5.8×5.8)
= 0.148
kinetic energy = 1/2mv^2
= 1/2 × (0343 × 0.148×0.148)
= 3.78 J
To know more about velocity visit:
brainly.com/question/18084516
#SPJ4
A focus mirror sculpture was opened in Rockefeller Centre in New York City in 2006. Standing three storeys tall and weighing 23 tonnes, its concave side faced the Rockefeller Centre and its convex side faced 5th Avenue.
A. What is the nature of the image of 5th Avenue?
B. Which property of concave mirror is utilised for using them as shaving mirrors?
C. A taxi on 5th Ave is located 38 metres from the convex side of this culture and its image is 1/5 the size of the taxi. Determine the focal length of the mirror.
D. Estimate the image size of the 270 metre tall Rockefeller Centre if it is located an estimated distance of 100 metres from the concave mirrors surface of focal length 10 metre.
A. The nature of the image of 5th Avenue in the mirror sculpture is that it is a virtual, upright, and smaller image. This is because the concave mirror is used to reflect light outwards, creating a virtual image that cannot be projected onto a screen.
B. The property of concave mirrors that is utilized for using them as shaving mirrors is their ability to form a smaller, magnified image. This is because concave mirrors have a negative focal length, which causes light rays to diverge and form a smaller image that is closer to the mirror.
C. To determine the focal length of the mirror, we can use the formula 1/f = 1/u + 1/v, where f is the focal length, u is the object distance (38 meters), and v is the image distance (unknown). We know that the image size is 1/5 the size of the object, so we can set v = -5u (since the image is virtual and inverted). Substituting these values into the formula and solving for f, we get f = -(5u^2)/4 = -(5(38^2))/4 = -4725/4 = -1181.25 meters.
D. To estimate the image size of the 270 meter tall Rockefeller Centre, we can use the formula: h' = -h * (u/f) where h' is the image height, h is the object height (270 meters), u is the object distance (100 meters) and f is the focal length (10 meters). Substituting these values in the formula, h' = -270 * (100/10) = -2700 meters. This means the image of the Rockefeller Centre would be 2700 meters tall, which is not possible because it's taller than the building itself. This is an indication that the image is not real and is a virtual image.
What is the difference between flat mirrors and curved mirrors?Unlike plane mirrors, spherical mirrors form images that are different in size from the size of the object. While the convex mirror forms images that are always smaller than the object, the concave mirror forms images of different sizes, depending on the position in which the object is placed on its axis.
Learn more about convex mirror in brainly.com/question/11627506
#SPJ1
In which of the following sport the turning effect of force used
a) swimming b) tennis c) cycling d) hockey
The turning effect of force used in cycling. Hence, option (c) is correct.
What is turning effect of force?The moment is the term for turning effect of a force. It is the result of multiplying the force by the perpendicular distance from the force's line of action to the pivot point or location where the object will turn.
If a body that is being affected by a net external force is allowed to revolve around a pivot, the body will typically turn in the force's direction.
When a cycle paddled, force is applied for revolving it. That is why, the turning effect of force used in cycling.
Learn more about force here:
https://brainly.com/question/13191643
#SPJ1
Due to the drivers not paying attention, a small car and a big truck collide, both are initially moving at 25 mph towards each other. Compare the magnitude of the force the truck exerts on the car to the magnitude of the force the car exerts on the truck. Which force is greater? Which vehicle would you rather ride in? Describe why you made your choice.
As a result, the amount of force the truck exerts on the automobile is equal to the amount of force the truck exerts on the car.
As per Newton's third law of motion
If object A applies a force to object B, then object B must apply a force to object A in the opposite direction and of equal strength. This rule illustrates a symmetry in nature whereby forces always occur in pairs and that no body can exert a force without also being subjected to one.
Because the accident is a head-on collision, according to Newton's third law, both the automobile and the truck will exert equal force against one another.
As a result, it will be safe to ride in the truck since the automobile will accelerate more quickly under the same force due to its lighter weight. Bigger acceleration results in a greater change in velocity, which increases the driver's workload.
For more questions on Newton's third law of motion
https://brainly.com/question/25998091
#SPJ4
What is the lever arm formula?
The distance that separates the force's line of action from its rotational axis is known as the lever arm. and the torque's magnitude is = N m.
τ = F x r
Signs:- Torque = τ
Force = F
Lever Arm Length = r
In many electromechanical driving systems, lever arms are used. Axles and spindles are nonrotating shafts, while transmission shafts are rotating components that move power and torque from one place to another. Shafts can be either hollow or solid. In gate drive applications, particularly for radial gates and vertical gates, hollow shafts are sometimes referred to as torque tubes.
This is so that they can transfer torque to a hoist winch, which is their main function in these gate drives. For gate drives, the shafting may be subjected to axial forces, torsion from transmitted torque, bending from transverse loads from gears, sprockets, and sheaves, and torsion owing to transmitted torque.
know more about torque here
https://brainly.com/question/25708791#
#SPJ4
Copper (Cu) reacts with phosphorus (P) to produce copper (II) phosphide.
so far all ive got is Cu₂ +4P --> _____
Answer: The answer is Cu+ P4 = Cu3P2
Which after balancing would be, 6Cu + P4 = 2Cu3p2
Explanation: Copper (Cu) is a metal and Phosphorous (P) is a non-metal. Metals and Non-metals combine to form ionic compounds where there is a transfer of ions from metal to non-metal.
Phosphorous has 5 valence electrons in its outer shell and Copper has 2 valence electrons. Following the octet rule, which means that the outer shell should have 8 electrons to be complete we see that combining these two metals on combining have electrons insufficient so we combine till we reach the octet structure. In this case, it happens when there are three copper and two phosphorous. We see that there are no more valence electrons. So it forms Copper II Phosphide, where the two indicates the charge of Copper.
Then we move on to balance both the sides of the equation, upon placing one number after the other to make the numerical value of elements equivalent to the other. Which gives us the answer.
If A and B are two Hermitian operators, showthat AB and BA may
not be Hermitian, but that (AB + BA) andi(AB-BA) are both
hermitian. Prove that the expectation value ofA2 is
always real and non-negative. If A2=2,find the
eigenvalues of A
A and B being Hermitian operators means that they are equal to their own conjugate transpose.
What is a Hermitian operator?
A Hermitian operator is an operator that is equal to its own complex conjugate. This means that if an operator A is Hermitian, then A=A*. This property is important in quantum mechanics, since it guarantees that the eigenvalues of the operator are real.
AB ≠ BA
(AB + BA) = (A + B)*(A + B) = A*A + A*B + B*A + B*B
(AB + BA) is Hermitian since the conjugate transpose of a sum is the sum of the conjugate transposes.
i(AB-BA) = i(A - B)*(A - B) = -iA*A + iA*B -iB*A + iB*B
i(AB-BA) is Hermitian since the conjugate transpose of a sum is the sum of the conjugate transposes.
The expectation value of A2 is always real and non-negative since A2 is Hermitian and thus equal to its own conjugate transpose, which implies its eigenvalues are real.
If A2 = 2, then A can have eigenvalues of ±√2.
Hence, eigenvalues of A is ±√2.
To know more about a Hermitian operator,
https://brainly.com/question/14671266
#SPJ4
A imple pendulum ha a period of 3 econd. If the value of ‘g’ i taken a 9. 98 m-2 calculate the length of the pendulum
Answer:
T (Period) = 2 π (L / g)^1/2 for a simple pendulum
L = g * T^2 / (4 π^2)
L = 9.98 m/s^2 * 9 s^2 / 39.5 = 2.27 m
10) An ice cube of mass 0.046 kg and temperature -14 C is heated until it is now fully melted and at a temperature of 11C now. What percentage of the total energy was used to melt the ice
90.23 % percentage of the total energy was used to melt the ice.
Define Energy?Energy is the quantitative property that is transferred to a body or to a physical system, recognizable in the performance of work and in the form of heat and light. Energy is a conserved quantity—the law of conservation of energy states that energy can be converted in form, but not created or destroyed.
Calculation -:Total energy used from -[tex]14^{o}[/tex]C to [tex]11^{o}[/tex]C
= [tex]m_{i}c_{i} T_{i}[/tex] + [tex]m_{i} L_{f}[/tex] +[tex]m_{w} c_{w}[/tex]Δ[tex]T_{2}[/tex]
= (0.013×2200×8) + (0.031×334000) + (0.013×486×11)
= 400.4 + 4342 + 69.498
= 4811.898 J
% energy used to melt = 4342/4811.898 × 100
= 90.23 %
To know more about energy visit :
brainly.com/question/1932868
#SPJ4
What velocity must a 2. 25 kg croquet mallet have in order to have the same momentum as 1. 25 kg ball that has a momentum 6. 25 kg•m/s to the west
2.78 m/s to the west velocity must a 2. 25 kg croquet mallet have in order to have the same momentum as 1. 25 kg ball that has a momentum 6. 25 kg•m/s to the west.
Given,
Mass = 2.25kg
Momentum = 6.25 kg•m/s
To find,
Velocity
Formula used,
Momentum = Mass x velocity
Calculation,
6.25 kg•m/s = 2.25 kg x velocity
Velocity = 6.25/2.25
Velocity = 2.78 m/s
The conservation of momentum principle asserts that the quantity of momentum inside a problem domain remains constant; momentum is not generated nor destroyed, but only modified by the action of forces as defined by Newton's equations of motion.
Newton's third law says that for every force exerted by object A on object B, object B exerts an equal but opposite force in magnitude and direction. Newton utilised this concept to create the law of conservation of momentum.
To learn more about conservation of momentum, here
https://brainly.com/question/29220242
#SPJ4
The measurement of how far the particles are pushed from their _______________ is called amplification.
Amplification is the term used to describe how far the particles are pushed from their initial position.
Is it a measurement of how closely or widely spaced away the particles are in a given area?How closely molecules are packed together is determined by density. Because air is a gas, its molecules may either pack closely or spread widely. Higher up, less air is pressing down from above, and gravity is less away from the center of the Earth.
Sound is it longitudinal?Longitudinal waves are what makeup sound. Compressions and rarefactions are also present in longitudinal waves when they pass through any given material. When particles travel in close proximity to one another, compression occurs, generating areas of intense pressure.
To know more about Amplifications visit:
brainly.com/question/16133707
#SPJ4
water can be thought of as a mass of moving particles what evidence supports this idea.
When temperature of water rises, it stats moving from higher to lower temperature area - this evidence supports that water can be thought of as a mass of moving particles .
What are the properties of liquid?The volume retention and conformity to the shape of a liquid's container are two of its most noticeable physical characteristics. When a liquid substance is poured into a container, it conforms to the shape of the container and will stay inside the container so long as the liquid state persists.
Water is a liquid. Hence, water can be thought of as a mass of moving particles.
Learn more about liquid here:
https://brainly.com/question/20922015
#SPJ1