Arrange the rock layers from oldest to youngest. Reexamine the rock outcrops if you need to. Record the order in the
Student Guide.
TOOLS
youngest
Breccia
Conglomerate
Age
Dolostone
Shale
oldest

Answers

Answer 1

Answer:

from top (youngest) to bottom (oldest) -

Conglomerate

Brecca

Shale

Dolostone

Explanation:

got it wrong from the person above and then it said this the right answer lol.

Answer 2

The oldest rock layer among the given options is shale then it is dolostone and then conglomerate and the youngest rock layer is Breccia.

What is sedimentary rocks?

Sedimentary rocks are formed from the sediments by river and ocean. These are developed over time by the action of wind and water. Sedimentary rocks are deposition or accumulation or minerals on the earth surface.

There are different types of rock layers based on the minerals present, age and formation.Shale rock is a clastic sedimentary rock formed flakes of clay minerals.

Conglomerate rocks is another clastic rock containing round clasts of more than two millimeters in diameter. Dolostone or dolomite is limestone and breccia is a mineral cement with fine sharp angled fragments.

The oldest among this is shale and the order for others from oldest to youngest is dolostone, conglomerate and breccia.

To find more about sedimentary rocks, refer the link below:

https://brainly.com/question/10709497

#SPJ5


Related Questions

What is the volume of the shape below?

Answers

I think it is 18(c.m)2 but their is no unit for the length,width,height

According to the thin-lens equation, when an object is infinitely far away from a lens, where will the image form?.

Answers

The image will form at the focal point

1/object + 1/image = 1/focal

If the object distance is infinite then the image distance equals the focal distance

An airplane lands with an initial velocity of 70.0 m/s and then decelerates at 1.50 m/s2 for 40.0 s. What is its final velocity?

Answers

Answer:

10 m/s

Explanation:

vi = 70 m/s

a = -1.5 m/s²

t = 40 s

vf = vi + at

= 70 + (-1.5 x 40)

= 10 m/s

The final velocity will be "10 m/s".

Given:

Initial velocity,

[tex]v_i = 70 \ m/s[/tex]

Deceleration,

[tex]a = -1.50 \ m/s^2[/tex]

Time,

[tex]t = 40 \ s[/tex]

As we know,

Final velocity, [tex]v_f = v_i+at[/tex]

By substituting the values, we get

                               [tex]= 70+(-1.5\times 40)[/tex]

                               [tex]= 70+(-60)[/tex]

                               [tex]= 70-60[/tex]

                               [tex]= 10 \ m/s[/tex]

Thus the above answer is appropriate.

Learn more:

https://brainly.com/question/18353887

A hot air balloon hovers at 92.4 m above the ground. The pilot drops a box over the edge of the basket. How fast does the person standing 10 m away, have to go to catch the box, before it hits the ground?

Answers

Answer:

The person has to move at the speed of 2.30 m/s towards the dropping point to catch the box.

Explanation:

Let t be the time taken by the box to reach the ground and v be the speed of the person on the ground standing 10 m away from the dropping

point.

As distance=(speed) x (time), so

[tex]10=vt\cdots(i)[/tex]

Initially, the height of the box from the ground is 92.4 m.

So, the displacement, s, covered by the box when it reached the ground,

[tex]s=92.4[/tex] m in the downward direction.

The gravitational force action of the box is also in the downward direction.

The initial velocity of the balloon, u=0.

According to the equation of motion,

[tex]s=ut+\frac1 2 at^2[/tex]

where a is the acceleration, u is initial velocity and.

Here, [tex]a=g=9.81 m/s^2[/tex] (acceleration due to gravity) and s and a are having the same direction.

So, on putting the values in the equation, we have

[tex]92.4=0\timest+ \frac 1 2 (9.81)t^2[/tex]

[tex]\Rightarrow t^2=\frac{92.4\times 2}{9.81}[/tex]

[tex]\Rightarrow t=\sqrt{\frac{92.4\times 2}{9.81}}[/tex]

[tex]\Rightarrow t=4.34[/tex] seconds.

So, the time available for the man on the ground to catch the bot is 4.34 seconds.

Now, from equation (i),

[tex]10=v\times 4.34[/tex]

[tex]\Rightarrow v = 10/4.34[/tex]

[tex]\Rightarrow v = 2.30[/tex] m/s.

Hence, the person has to move at the speed of 2.30 m/s towards the dropping point to catch the box.

2- Two materials, A and B, are used to make cables of
identical cross section and length, to lift identical loads.
If A has a greater Young's Modulus than B, which cable
will stretch the most when loaded? Explain why.

Answers

Answer:

Cable  B will more stretch the most.

Explanation:

Given that,

Length of material A =[tex]l_{A}[/tex]

Length of material B =[tex]l_{B}[/tex]

If A has a greater Young's Modulus than B.

We know that,

The deflection is defined as,

[tex]\delta=\dfrac{Wl}{AE}[/tex]

For material A,

[tex]\delta_{A}=\dfrac{W_{A}l_{A}}{A_{A}E_{A}}[/tex]

[tex]\delta_{A}\propto\dfrac{1}{E_{A}}[/tex]

For material B,

[tex]\delta_{B}=\dfrac{W_{B}l_{B}}{A_{B}E_{B}}[/tex]

[tex]\delta_{B}\propto\dfrac{1}{E_{B}}[/tex]

The deflection is inversely proportional to the young's modulus.

We need to find which cable  will stretch the most when loaded

Using formula of deflection

[tex]\dfrac{\delta_{A}}{\delta_{B}}=\dfrac{\dfrac{W_{A}l_{A}}{A_{A}E_{A}}}{\dfrac{W_{B}l_{B}}{A_{B}E_{B}}}[/tex]

Put the value into the formula

[tex]\dfrac{\delta_{A}}{\delta_{B}}=\dfrac{\dfrac{Wl}{AE_{A}}}{\dfrac{Wl}{AE_{B}}}[/tex]

[tex]\dfrac{\delta_{A}}{\delta_{B}}=\dfrac{E_{B}}{E_{A}}[/tex]

So, [tex]\delta_{B}>\delta_{A}[/tex]

Hence, Cable  B will more stretch the most.

explain how william gilbert used the scientific method to disprove ptolemy's belief that garlic affected lodestone

Answers

Answer:

While maintaining a successful medical practice, Gilbert carried out extensive research into electricity and magnetism. Very little about these phenomena was understood when he began his experiments. The basic magnetic properties of lodestone (magnetic iron ore) were familiar, the magnetic compass had been in use for some time by navigators, and the amber effect (now called the triboelectric effect), by which amber and certain other materials acquire a static charge via friction, was generally known. But no one could adequately explain how or why such things worked. Gilbert’s investigations led him to develop a number of his own theories.

Explanation:

How much force is needed to accelerate a 3kg skateboard at 5m/s2

Answers

F = ma

F = 3*5

F = 15 N

Hope it helps :)

Answer:

F=15

Explanation:

Please i just need help

Answers

Answer:

The first one is A gravity does not effect wind and the second one is A also because the we know right a way that the moon is closest to Earth

What is 1,000 kilograms in Newtons?

Answers

Answer:

9800 N

Explanation:

F = mg

I am assuming the question is what is the weight of a 1000kg on earth

HELP, 15 POINTS!
How does uniform motion relate to velocity and acceleration?

Answers

For an object to move in a uniform motion it has to have either a constant velocity or a constant acceleration. If the object has a constant velocity then it is moving at zero acceleration and this means moving with out slowing down or speeding up.

Write any 4 equations base on velocity and acceleration. ​

Answers

If it’s they are separated, it would be,
1) v=u+at Velocity
2) s=ut+half at squared Displacement with positive acceleration
3) s= half (u+v)t Displacement knowing initial and final velocities
4) v squared=u squared +2as Velocity squared

A circus truck full of monkeys has a mass of 3175 kg. The kinetic energy of the circus truck is 128,587.5 J. Calculate the speed of the truck.

Answers

Explanation:

please mark me as brainlest

A circus truck full of monkeys has a mass of 3175 kg. The kinetic energy of the circus truck is 128,587.5 J. The speed of the truck is 9 m/sec

What is speed?

The speed of an object is the magnitude of the change of its position over time or the magnitude of the change of its position per unit of time; it is thus a scalar quantity.

Kinetic Energy =(.5) Mass. (Velocity)²

K.E = 0.5 m.v²

81 = v²

v = 9 m/sec

A circus truck full of monkeys has a mass of 3175 kg. The kinetic energy of the circus truck is 128,587.5 J. The speed of the truck is 9 m/sec

To learn more about speed refer to the link:

brainly.com/question/28224010

 #SPJ2

What Fitnessgram test is testing your CARDIORESPIRATORY ENDURANCE?

Answers

Answer:

pacer test

Explanation:

The Pacer test is the best way to stay fit

Does the surface area of the salute, the temperature
of the savent, and the amount or agitation that
loccurs when the solute and the savent are mixed
affect the rate or dissolution, how?

Answers

Answer:

if I understand ur question, you mean does the surface area of solute, temperature of solvent and the amount of particles affect the rate of dissolution?

YES

How? The surface area of the solute is the part that is in contact with the solvent. For this reason granules or powdery substance dissolves better than it lumps.

The temperature of solvent also affects dissolution. For solid solutes, increase in temperature causes solute to disslove better but for gases increase in temperature reduces their solubility

Amount of particles also affect dissolution. A quantity of solvent has limited number of particles it can dissolve. If the particles are more than the solvent can dissolve,the excess particles will precipitate out

What is wrong with the following diagram?

Answers

What is wrong with the diagram is : ( 4 )

The spot with the "maximum kinetic energy" should be on the lowest point of the roller coaster at the far left side on the bottom.

Gravitational potential energy vs kinetic energy

The maximum gravitational potential energy is located at the highest peak which the roller coaster attains while as the roller coaster comes down from the peak the gravitational potential energy decreases while the kinetic energy increases.

The point at which the roller coaster should attain it maximum kinetic energy should be at the lowest point ( i.e far left side of the bottom ).

Hence we can conclude that error in the diagram is the spot with the "maximum kinetic energy" should be on the lowest point of the roller coaster at the far left side on the bottom.

Learn more about Kinetic energy: https://brainly.com/question/25959744

What is the power of a bulb rated at 5 A, 6 V?

Answers

Answer:

30watts

Explanation:

P = IV = 5 x 6 = 30watts

Good evening! Can someone please answer this, ill give you brainliest and your earning 50 points. Would be very appreciated.

Answers

Explanation:

Broderline Green house gases are Carbon dioxide, sulphur dioxide etc.These gases absorb long wave photons of infrared light .It simply increases the temperature of our atmosphere .It becomes a reason behind increase in sea level

Option B is correct

Which of the following types of galaxies are typically reddest in color?

- spirals
- irregulars
- ellipticals

Will mark brainliest!

Answers

Answer:

It's ellipticals!!

Explanation:

hope its right

see attached, thanks !!

Answers

Answer: A
Explanation:

How can we measured the volume of spherical object?​

Answers

You do need to be more specific, the volume of a sphere is V = 4/3 π r^3, it does not need to be related to a cylinder. So if you know the radius, you can calculate the volume. The volume of a cylinder with the same radius and with a height of 2r (since it would be the diameter across) would be V = π r^2 h = 2π r^3.

A car has a mass of 1.50 x 10^3kg. If the force acting on the car is
6.75 X 10^3 N to the east, what is the car's acceleration?

Answers

acceleration = force / mass = 6750 / 1500 = .... m/s^2 east

If you rub an air-filled balloon on your hair, you can make it stick to a wall. when the balloon and your hair are rubbed together, electrons are transferred from your hair to the balloon.
a. what is the net charge on the balloon after it is rubbed on your hair? is it positive, negative, or zero?
b. what do you think happens to the atoms near the wall's surface when the balloon is brought near the wall? (hint: the balloon will stick to the wall.) halloon to a metal​

Answers

Atoms will be negatively charged whenever they gain electrons. Attraction of atoms is due to opposite charges of the atoms.

a. Negative

b. Atoms near the wall are positively charged.

Static Electricity

This is the phenomenon whereby the carrier of electric charges are not in motion.

The fundamental law of electrostatic state that like charges repel while like charges attract each others.

If you rub an air-filled balloon on your hair, you can make it stick to a wall. when the balloon and your hair are rubbed together, electrons are transferred from your hair to the balloon.

a. The net charge on the balloon after it is rubbed on your hair will therefore be negative because it has gained electron

b. The atoms near the wall's surface are positively charged. When the balloon is brought near the wall, unlike charges will surely attract each other.

Learn more about static electricity here: https://brainly.com/question/830809

What are potential sources of error in Marta's
experiment?

Answers

Answer:

She only looked at the results for lunch and no other meals. She did not define what “healthy” means. She tested a different number of girls and boys and did not factor that into her results. Her study is biased.

Explanation:

Answer:

She only looked at the results for lunch and no other meals. She did not define what “healthy” means. She tested a different number of girls and boys and did not factor that into her results. Her study is biased.

Explanation:

Explanation:

Differentiate between concave and convex lens. Write your own answer

Answers

Answer:

A concave lens is thinner at the center and thicker at the edges while a convex lens is thicker at the centre and thinner at the edges.

Answer:

Read below.

Explanation:

Convex lenses: have a thicker centre than their edges. Converges light rays to a point.

Concave lenses: have thicker edges than their centre. Diverges the light rays passing through it.

Describe the 4 steps taken to separate a solid mixture of iron fillings, chalk powde
and table salt based on their properties given below.
[3]
The first step has been done for you.
Soluble in water?
Magnetic?
Decompose upon
heating?
No
Yes
No
Iron
Fillings
Chalk
powder
able salt
No
No
Yes
Yes
No
No

Answers

Answer:

no yes

Explanation:

What effect do clouds have on the color of the sky?
a) they transmit light waves.
b) they reflect light waves.
c) they absorb light waves.
d) they scatter light waves.

Answers

Answer:

they reflect light waves

Explanation:

The tiny drops or ice particles in clouds scatter between 20 and 90 percent of the sunlight that strikes them

Answer:

They reflect light waves

Explanation:

PLEASE HELP ASAP !! I WILL MARK YOU BRAINLIEST!!

Answers

Answer:

A -- Correct (what you have on the paper)

B -- (Sphere A - negative 6 ) (Sphere B - negative 6) (Sphere C - positive 9)

(Total - negative 3)

Explanation:

Hope this helps! Please let me know if you need more help, or if you think my answer is incorrect. Brainliest would be MUCH appreciated. Have a wonderful day!

Answer:

Explanation:

a. Total charge = sum of charges of A, B and C

= -4 + -8 + 9

= -3.0C

b. After touching each other, the charges on A and B will equalized. When separated, they have the same charge = (-4 + -8) / 2 = -6.

Charge on C and the total charge will not change.

A : -6.0C

B : -6.0C

C : +9.0C

Total : -3.0C

A truck is pulling a trailer down a highway. The total mass of the trailer is 360kg and the
force at which the truck is pulling is 7.200N, What is the acceleration of the truck?

Answers

Question :-

A Truck is Pulling a Trailer down a Highway . The Total Mass of the Trailer is 360kg and the Force at which the Truck is pulling is 7200 Newton . What is the Acceleration of the Truck ?

Answer :-

Acceleration of the Truck is 20 m/s² .

Explanation :-

As per the provided information in the given question, we have been given that the Mass of the trailer is 360 kg . Force is given as 7200 Newton . And, we have beena asked to calculate the Acceleration of the Truck .

For calculating the Acceleration , we will use the Formula :-

[tex] \bigstar \: \: \: \boxed {\sf{ \: Acceleration \: = \: \dfrac {Force}{Mass} \: }} [/tex]

Therefore , by Substituting the given values in the above Formula :-

[tex] \dag \: \: \: \sf {Acceleration \: = \: \dfrac {Force}{Mass}} [/tex]

[tex] \longmapsto \: \: \: \sf {Acceleration \: = \: \dfrac {7200}{360}} [/tex]

[tex] \longmapsto \: \: \: \textbf {\textsf {Acceleration \: = \: 20 }} [/tex]

Hence :-

Acceleration = 20 m/s² .

[tex] \underline {\rule {180pt} {4pt} } [/tex]

Answer:

A Truck is Pulling a Trailer down a Highway . The Total Mass of the Trailer is 360kg and the Force at which the Truck is pulling is 7200 Newton . What is the Acceleration of the Truck ?

Answer :-

Acceleration of the Truck is 20 m/s² .

Explanation :-

As per the provided information in the given question, we have been given that the Mass of the trailer is 360 kg . Force is given as 7200 Newton . And, we have beena asked to calculate the Acceleration of the Truck .

For calculating the Acceleration , we will use the Formula :-

\bigstar \: \: \: \boxed {\sf{ \: Acceleration \: = \: \dfrac {Force}{Mass} \: }}★

Acceleration=

Mass

Force

Therefore , by Substituting the given values in the above Formula :-

\dag \: \: \: \sf {Acceleration \: = \: \dfrac {Force}{Mass}}†Acceleration=

Mass

Force

\longmapsto \: \: \: \sf {Acceleration \: = \: \dfrac {7200}{360}}⟼Acceleration=

360

7200

\longmapsto \: \: \: \textbf {\textsf {Acceleration \: = \: 20 }}⟼Acceleration = 20

Hence :-

Acceleration = 20 m/s² .

How are distance and elapsed time different?

Answers

Answer:

hope it helps...

Explanation:

The length an object moves through its motion is called the distance. ... The motion of an object takes time to occur. That is, moving from one place to another happens in the course of time. Such a time interval is called the elapsed time.

PLEASE THANK MY ANSWER..

Distance is a numerical representation of the distance between two objects or locations. The elapsed time is the name given to such a period of time.

What is the distance?

Distance is a numerical representation of the distance between two objects or locations.

The distance can refer to a physical length or an estimate based on other factors in physics or common use. |AB| is a symbol for the distance between two points A and B.

The relation between the distance and the time is found as;

distance = speed × time

[tex]\rm d = v \times t[/tex]

The distance is the length of time an item moves during its motion. An object's motion needs time to occur. That is, traveling from one location to another occurs across time.

The elapsed time is the name given to such a period of time. It is denoted by t.

Hence the denotation and the defination of both physical quantity is different.

To learn more about the distance refer to the link;

https://brainly.com/question/26711747

Two ways to report the amount of elements is to give the percentage by number and percentage by mass. When reporting the composition of the sun by mass percentage, the amount of hydrogen drops, but the amount of helium grows. Why?

Answers

The composition of the sun by mass of hydrogen drops, but the amount of helium grows because helium is heavier than hydrogen.

What is the percentage by mass of an element in a substance?

The percentage by mass of an element in a compound is the percentage the mass of that element contributes to the total mass of the substance.

The percentage by mass of an element depends on the mass of the element.

Heavier elements in equal amounts with less dense elements have a greater percentage mass.

Since the mass of the helium atom is greater than the mass of the hydrogen atom, the Sun's composition by mass of hydrogen drops while that of helium increases.

Learn more about percentage mass at: https://brainly.com/question/5493941

Other Questions
25 POINTS AND BRAINLIEST17. A group of college students is volunteering for Help the Homeless during their spring break. They are putting the finishing touches on a house they built. Working alone, Irina can paint a certain room in 9 hours. Paulo can paint the same room in 8 hours. Write an equation that can be used to find how long it will take them working together to paint the room. How many hours will it take them to paint the room? If necessary, round your answer to the nearest hundredth. Which of the following is the definition of point of operation?a)Component of the machine which moves while the machine is workingb) Part of the mechanical system which conducts energy to the part of the machine performing the workc) Area on a machine where the work is performedd) Repetitive up-and-down or back-and-forth linear motion Complete thisproportion: In the extraction of iron, carbon monoxide acts as O A catalyst OB an inert gas . an oxidising agent . a reducing agent . What are some Drawbacks of business Debt? Which fraction is equal to 0.25.? Need help fast I dont know this What is the population of Lichstenstein?Thanks :) Write a compare-and-contrast analysis of how Greg Ridley from "The Treasure of Lemon Brown" changes from the beginning of the story to the end Hii you can help me please Please can somebody solve this this is due today The diameter of a cylinder is 7 yd. The height is 4 yd Find the volume of the cylinder. Texting while driving is a serious problem today. Texting in the car can lead to accidents. To solve this problem, drivers should turn off their phones. Another idea is to put the phone in a place where it cannot be reached.What signal words in the passage show problems and solutions? Check all that apply.problemsolvewhileideawhere Please help me!!!!!!!!!!! how do I do this question? Find the solution to 5 divided 1/4 , using either the flip and multiply method or common denominator method.5/42051/20 3. Each character in an opera has what musical characteristic? O his own melody O his own key signature O his own wardrobe O his own audience Select the correct answer from each drop-down menu.consider this expression.le?12329-The least common denominator of the two rational terms is write the equation for the function that has the shape of f(x)=x^3 but is moved three units to the left, seven units upward, and then reflected in the x-axis? What is the meaning of "inherently" as used in paragraph 12? A not very good B belonging to the basic nature of someone or something very important or noticeable D not having or showing complete trust in someone or something Could anyone help me find the area of these 2 shapes? 1st one is the rectangle and the second one is the trapezoid I think PLS ANYONE ILL GIV U BRAINLIEST!!!!!!