assume a corporation has cumulative voting and there are two directors up for election. what is the maximum number of votes a shareholder who owns 100 shares can cast for candidate jones if there are a total of 5 candidates?

when we Roll a fair 6 66-sided die. then the probability of P (not 5) is 65/66

     The concept used a die is a tool used for games and gambling. The die is a cube with six faces, each of which has a different number of dots from one to six. The roll of a die is a random event, which means that it is unpredictable, and each roll is independent of any other roll.

 Let's solve the question that is P(not 5)

                 Since the die is fair, we have 66 sides on the die. Each of the sides has a probability of 1/66 of being rolled. P(not 5) means that we need to determine the probability of rolling a number that is not 5.

           We know that a 66-sided die has 65 numbers other than 5.

     Therefore, the probability of rolling a number that is not 5 is 65/66.

            P(not 5) = 65/66

   So, the probability of not rolling a 5 is p(not 5) = 65/66.

To learn more about Rolling a fair die: https://brainly.com/question/30271275

#SPJ11

Answer:

6.25 minutes

Step-by-step explanation:

So, if there are 96 tests being graded in 2 minutes, the average per minute (using the equation 96/2 = average) would be 48 per minute. Next you would do 300/48 to get the number of minutes that it would take to grade that amount. The answer to that would be 6.25, So it would take approximately 6.25 minutes.

The solutions of provide logarithmic equations are present in below :

1) x = 9 ; 2) x = 0 ; 3)p = 7/9 ; 4) k= 2 ; 5) a= -1 ; 6) r = -1/2 ; 7) n = 2 ; 8) x = 1/35 ; 9) m = -2 ; 10) x = 84 ; 11) v = -6, -6 ; 12) x = -4, -7

The logarithmic number is associated with exponent and power, such that if xⁿ = m, then it is equal to logₓ m = n. That is exponential value are inverse of logarithm values. Some basic properties of logarithmic numbers:

Now, we solve each logarithm equation one by one. Assume that 'log' is the base-10 logarithm where absence of base.

1) log (5x) = log (2x + 9)

Exponentiate both sides

=> 5x = 2x + 9

=> 3x = 9

=> x = 9

2) log (10 − 4x) = log (10 − 3x)

Exponentiate both sides,

=> 10 - 4x = 10 - 3x

simplify, => x = 0

3) log (4p − 2) = log (−5p + 5)

Exponentiate both sides,

=> 4p - 2 = - 5p + 5

simplify, => 9p = 7

=> p = 7/9

4) log (4k − 5) = log (2k − 1)

Exponentiate both sides,

=> 4k - 5 = 2k - 1

simplify, => 2k = 4

=> k = 2

5) log (−2a + 9) = log (7 − 4a)

Exponentiate both sides,

=> - 2a + 9 = 7 - 4a

simplify, => 2a = -2

=> a = -1

6) 2log₇( −2r) = 0

=> log₇( −2r) = 0

using the property, log꜀a = n <=> cⁿ = a

=> ( 7⁰) = - 2r

=> -2 × r = 1 ( since a⁰ = 1 )

=> r = -1/2

7) −10 + log₃(n + 3) = −10

=> log₃(n + 3) = −10 + 10 = 0

using the property, log꜀a = n <=> cⁿ = a

=> 3⁰ = n + 3

=> 1 = n + 3

=> n = 2

8) −2log₅ ( 7x ) = 2

=> log₅ 7x = -1

=> 5⁻¹ = 7x

=> x = 1/35

9) log( −m) + 2 = 4

=> log( −m) = 2

Exponentiate both sides,

=> -m = 2

=> m = -2

10) −6log₃ (x − 3) = −24

simplify, log₃ (x − 3) = 4

=> (x - 3) = 3⁴ ( since log꜀a = n <=> cⁿ = a )

=> x - 3 = 81

=> x = 84

11) log₁₂ (v²+ 35) = log₁₂ (−12v − 1)

=> log₁₂ (v²+ 35) - log₁₂ (−12v − 1) = 0

Using the quotient property of logarithm,

[tex]log_{12}( \frac{v²+ 35}{-12v-1}) = 0 [/tex]

[tex]\frac{v²+ 35}{-12v - 1} = {12}^{0} = 1 [/tex]

[tex]v²+ 35 = −12v − 1[/tex]

[tex]v²+ 35 + 12v + 1 = 0[/tex]

[tex]v²+12v + 36 = 0[/tex]

which is a quadratic equation, and solve it by middle term splitting method,

[tex]v²+ 6v + 6v + 36= 0[/tex]

[tex]v(v + 6) + 6(v + 6)= 0[/tex]

[tex](v + 6) (6 + v)= 0[/tex]

so, v = -6, -6

12) log₉(−11x + 2) = log₉ (x²+ 30)

=> log₉ (x²+ 30) - log₉(−11x + 2) = 0

Using the quotient property of logarithm,

[tex]log₉(\frac{x²+ 30 }{−11x + 2}) = 0[/tex]

[tex] \frac{x²+ 30}{-11x + 2} ={9}^{0} = 1 [/tex]

=> x² + 30 = - 11x + 2

=> x² + 11x + 30 -2 = 0

=> x² + 11x + 28 = 0

Factorize using middle term splitting,

=> x² + 7x + 4x + 28 = 0

=> x( x + 7) + 4( x + 7) = 0

=> ( x + 4) (x+7) = 0

=> either x = -4 or x = -7

Hence, required solution is x = -4, -7.

For more information about logarithmic equation, visit :

https://brainly.com/question/25993029

Complete question:

kuta software infinite algebra 2 logarithmic equationsSolve each equation.

1) log 5x = log (2x + 9)

2) log (10 − 4x) = log (10 − 3x)

3) log (4 − 2) = log (−5 p + 5)

4) log (4k − 5) = log (2k − 1)

5) log (−2a + 9) = log (7 − 4a)

6) 2log₇ −2r = 0

7) −10 + log₃(n + 3) = −10

8) −2log₅ 7x = 2

9) log −m + 2 = 4

10) −6log₃ (x − 3) = −24

11) log₁₂ (v²+ 35) = log₁₂ (−12v − 1)

12) log₉(−11x + 2) = log₉ (x²+ 30)

The 90% confidence interval for [tex]$\mu_W - \mu_M$[/tex] is approximately [tex]$-13.2 \pm 27.1$[/tex], or (-40.3, 13.9).

The answer is (c) [tex]13.2 \pm 33.1[/tex], which is not correct.

Which is the confidence interval?

A confidence interval is a range around a measurement that conveys how precise the measurement is.

We can use the two-sample t-interval formula to find the confidence interval for the difference in means:

[tex]$\bar{x}_W - \bar{x}M \pm t{\alpha/2, \nu} \sqrt{\frac{s_W^2}{n_W} + \frac{s_M^2}{n_M}}$[/tex]

where [tex]$\bar{x}_{W}$[/tex] and [tex]$\bar{x}M$[/tex] are the sample means, [tex]$s_W$[/tex] and [tex]$s_M$[/tex] are the sample standard deviations, [tex]$n_W$[/tex] and [tex]$n_M$[/tex] are the sample sizes, [tex]$\nu$[/tex] is the degrees of freedom, and [tex]$t{\alpha/2, \nu}$[/tex] is the critical value from the t-distribution with [tex]$\nu$[/tex]degrees of freedom and a level of significance of [tex]$\alpha=0.1$[/tex] (since we want a 90% confidence interval, which corresponds to a 10% level of significance).

Plugging in the values, we get:

[tex]$\bar{x}_W - \bar{x}M \pm t{0.05/2, 23} \sqrt{\frac{s_W^2}{n_W} + \frac{s_M^2}{n_M}}$[/tex]

[tex]$\begin{aligned} &= 213.6 - 226.8 \pm t_{0.025, 23} \sqrt{\frac{45.3^2}{14} + \frac{49.4^2}{11}} \ &= -13.2 \pm 2.074 \times 13.102 \ &= -13.2 \pm 27.115 \end{aligned}$[/tex]

Therefore, the 90% confidence interval for [tex]$\mu_W - \mu_M$[/tex] is approximately [tex]$-13.2 \pm 27.1$[/tex], or (-40.3, 13.9).

The answer is (c) [tex]13.2 \pm 33.1[/tex], which is not correct.

To learn more about the confidence interval visit:

https://brainly.com/question/15712887

#SPJ1

complete question:

A phlebotomist measures the cholesterol levels of a sample of 25 people between

the ages of 35 and 44 years old. Here are summary statistics for the samples.

Cholesterol levels (mg per 100mL)

Women 35-44 years old

Men 35-44 years old

Sample mean

tilde x_{W} = 213.6

overline x_{M} = 226.8

Sample standard deviation

s_{W} = 45.3

s_{M} = 49.4

Sample size

n_{W} = 14

nu = 11

Assume that the conditions for inference have been met. Let mu_{w} ^ (- mu_{u}) be the difference in mean

cholesterol levels (in milligrams per 100 ml) in women and men of those ages.

Which of the following is a 90% confidence interval for mu_{W} ^ (- mu_{M})

Use a calculator to calculate the interval. (State your calculator settings for partial credit)

(a) - 13.2 plus/minus 33.1

(b) -13.2±29.7

(c) 13.2 plus/minus 33.1

(d) 13.2 plus/minus 29.7

(e) 13 plus/minus 33.1

Answer:

-13.2+- 33.1

Step-by-step explanation:

An assignment of probabilities to events in a sample space must obey all of the following: They must obey the addition rule for disjoint events, They must sum to 1 when adding over all events in the sample space, and The probability of any event must be a number between 0 and 1, inclusive. Hence, the correct option is All of the above.

Probability is the branch of mathematics that deals with the likelihood of a random event occurring. Probability is concerned with quantifying the probability of different results in a certain event.

The possibility that a specific event will occur is calculated using probability. Probability is calculated using several methods in mathematics, including axioms, probability spaces, events, random variables, and expectation values.

Learn more about Probability here: https://brainly.com/question/25839839

#SPJ11

It makes sense that 0 is the domain of y = √x because the square root of any number can never be negative, and 0 is the smallest positive number. Therefore, any values of x less than 0 would result in an undefined answer.

After 5 hours, the tank will have 50 gallons of water.

To solve this problem, use the following equation:

Gallons = Rate x Time

In this case, the rate is 5 gallons per hour and the time is 5 hours, so the equation becomes:

Gallons = 5 x 5

Therefore, the tank will have 50 gallons of water after 5 hours.

To learn more about gallons of water refer :

https://brainly.com/question/23545239

#SPJ11

Step-by-step explanation:

9 b^2 c  = a     divide both sides of the equation by 9c

b^2 = a / (9c)    now take the sqrt of both sides

b = ± sqrt ( a/(9c) ) =   ± 1/3 sqrt ( a/c)  <====I do not see the correct answer posted....    perhaps one of the choices was transcribed incorrectly....

Answer:

Second choice
∠BCA ≅ ∠DCA

Step-by-step explanation:

This logically follows from the fact that both ∠BCA and ∠DCA are right angles from the previous step. And the reason given is "All right angles are ≅)

So they are congruent

Answer:

Step-by-step explanation:

(52 divided by 80) multiplied by 100
that will give you the answer

The value of m∠JKL is 34°

An angle formed by a tangent and a secant intersecting outside a circle is equal to one-half the difference of the measures of the intercepted arcs.

Based on the theorem above, we can say:

m∠JKL = 1/2 * (159 - 91)

m∠JKL = 1/2 * 68

m∠JKL = 34°

Therefore, the value of m∠JKL in the circle is 34°.

Learn more about tangent-secant theorem on:

https://brainly.com/question/9132922

#SPJ1

The differential equation by variation of parameters, subject to the initial conditions y(0) can be found by homogeneous equation and by integrating it.

The solution to the differential equation by variation of parameters, subject to the initial conditions y(0), can be found by following these steps:
1. Separate the equation into homogeneous and particular parts.
2. Solve the homogeneous equation for its particular solution.
3. Construct a new auxiliary equation from the particular solution, integrating the particular solution with respect to the parameters.
4. Solve the auxiliary equation, again with respect to the parameters, and then integrate the result with respect to x.
5. Substitute the particular solution and the new parameters back into the original equation to solve it completely.
6. Substitute the initial condition y(0) to solve for the constants of integration.

To learn about the differential equation:

https://brainly.com/question/18760518.

#SPJ11

The half-life of an isotope is the time by which there is a 50% probability that decay has occurred if Cobalt-60 has a half-life of 5.27 years then mean time to decay is 7.65 years , standard deviation of the decay time is 3.82 years , the 99th percentile is  36.4 years and  the mean and standard deviation of the total time the experiment will last is 6.61 years.

(a) The mean time to decay can be found using the formula: [tex]mean = half-life / ln(2)[/tex].

Therefore, for cobalt-60 with a half-life of 5.27 years, the mean time to decay is:

[tex]mean = 5.27 / ln(2) \approx7.65 years[/tex]

(b) The standard deviation of the decay time can be found using the formula:

standard deviation =    [tex]half-life /(\ sqrt{(ln(2))}).[/tex]

Therefore, for cobalt-60 with a half-life of 5.27 years, the standard deviation of the decay time is:

standard deviation = [tex]5.27 / (\sqrt{(ln(2))}) \approx 3.82 years[/tex]

(c) The 99th percentile can be found using the cumulative distribution function (CDF) of the exponential distribution. For cobalt-60 with a half-life of 5.27 years, the CDF is:

[tex]CDF(t) = 1 - e^{(-t/5.27)}[/tex]

Setting the CDF equal to 0.99 and solving for t, we get:

[tex]0.99 = 1 - e^{(-t/5.27)}[/tex]

[tex]e^{(-t/5.27)} = 0.01[/tex]

[tex]-t/5.27 = ln(0.01)[/tex]

[tex]t = -5.27 * ln(0.01)[/tex]

[tex]t\approx 36.4 years[/tex]

Therefore, the 99th percentile of the decay time for cobalt-60 is approximately 36.4 years.

(d) Three cobalt-60 atoms, then the total time the experiment will last is the sum of the decay times of each atom. Since the decay times are independent and identically distributed, the mean and standard deviation of the total time can be calculated by adding the means and variances of each individual decay time.

The mean of the total time is:

[tex]mean(total) = mean(atom1) + mean(atom2) + mean(atom3)[/tex]

[tex]mean(total) = 7.65 + 7.65 + 7.65[/tex]

[tex]mean(total) = 22.95 years[/tex]

The variance of the total time is:

[tex]variance(total) = variance(atom1) + variance(atom2) + variance(atom3)[/tex]

[tex]variance(total) = (3.82)^2 + (3.82)^2+ (3.82)^2[/tex]

[tex]variance(total) \approx43.67 years[/tex]

The standard deviation of the total time is the square root of the variance:

standard deviation(total) [tex]= \sqrt{(variance(total))}[/tex]

[tex]standard deviation(total) \approx6.61 years[/tex]

Therefore, the mean and standard deviation of the total time for observing three cobalt-60 atoms until they decay are approximately 22.95 years and 6.61 years, respectively.

To practice more questions about standard deviation:

https://brainly.com/question/12402189

#SPJ11

Answer: 1.1. The donation per learner cannot be determined from the given table.

1.2. TABLE 1: INCOME IN RANDS OF FUNDRAISING

Number of learners that paid Income (R)

1 200

1.3. To calculate the missing value A, we need to add up all the given incomes and subtract it from the total income for 45 learners, which is 45 x A. Then we can solve for A:

Total income = 200 + 150 + 10(2,000) + 20(45) + A + 4,000 + 9,000

Total income = 45A

45A = 25,150

A = 558.89

Therefore, the missing value A is R558.89.

1.4. The dependent variable in the table is the income received from fundraising.

To find the ratio of income received from 10 learners to income received from 45 learners, we need to divide the income received from 10 learners by the income received from 45 learners and simplify the fraction:

Income from 10 learners = R1,100 (since each learner donates R110)

Income from 45 learners = R215

Ratio = Income from 10 learners : Income from 45 learners

= 1,100 : 215

= 20 : 3 (in its simplest form)

The total number of learners enrolled at the school is 1,100. If 80% of the learners paid, then the number of learners who paid is:

80% of 1,100 = 0.8 x 1,100 = 880 learners

The minimum income that the school can raise if 80% of the learners paid is when each of the 880 learners paid the minimum donation, which is R150:

Minimum income = 880 x 150 = R132,000

Since R132,000 is less than R170,000, the SGB chairperson's statement is not valid.

Step-by-step explanation:

On the material was used, the 100-meter flex of 14 AWA wire's entirety would range. If the silver and copper cable are in 0.0013 and 0.0014, aluminum spans 0.002 and 0.004, and iron is between 0.007 and 0.008

A force that works to slow something down or halt its progress: The air/wind drag slowed the vehicle down. the extent to which a material obstructs an electric charge from passing through it: There is little reluctance in copper.

The resistance (R) of a wire is given by the formula:

R = (ρ x L) / A

where:

ρ is the resistivity of the material

L is the length of the wire

A is the wire's cross-sectional size.

The cross-sectional area (A) of a wire with diameter d is given by the formula:

A = π x (d/2)²

where pi is a number in mathematics. (approximately equal to 3.14).

For a 100-meter length of 14 AWA wire with diameter 0.163 cm, we first need to convert the diameter to meters:

d = 0.163 cm = 0.00163 m

The cross-sectional area of the wire is then:

A = π x (0.00163/2)² = 2.087 x 10⁻⁶ m²

Using this value of A and the given resistivities, we can calculate the resistance for each material:

For copper:

R_copper = (1.67 x 10⁻⁸ O•m x 100 m) / (2.087 x 10⁻⁶ m²) = 0.00134 Ω

For silver:

R_silver = (1.59 x 10⁻⁸ O•m x 100 m) / (2.087 x 10⁻⁶ m²) = 0.00128 Ω

For aluminum:

R_aluminum = (2.65 x 10⁻⁸ O•m x 100 m) / (2.087 x 10⁶ m²) = 0.00199 Ω

For iron:

R_iron = (9.71 x 10⁻⁸ O•m x 100 m) / (2.087 x 10⁻⁶ m²) = 0.00735 Ω

Therefore, the overall resistance of the 100-meter length of 14 AWA wire made of these materials would depend on which material was used. If copper or silver were used, the resistance would be relatively low, around 0.0013-0.0014 Ω. If aluminum were used, the resistance would be higher, around 0.002 Ω. If iron were used, the resistance would be much higher, around 0.007 Ω.

To know more about Resistance visit:

https://brainly.com/question/17563681

#SPJ1

Answer:

[tex]\textsf{$\boxed{\checkmark}\;\;y$-value\;of\;vertex\;is\;$-1$}[/tex]

[tex]\textsf{$\boxed{\checkmark}$\;\;Minimum\;value\;occurs\;at\;$y = -1$}[/tex]

Step-by-step explanation:

Given equation:

[tex]y=x^2+8x+15[/tex]

As the given equation is quadratic with a positive leading coefficient, it is a parabola that opens upwards. Therefore, its vertex is its minimum point. This means that the minimum value of the range is the y-value of the vertex.

The x-value of the vertex of a parabola in the form y = ax² + bx + c is x = -b/2a. Therefore, the x-value of the vertex of the given equation is:

[tex]\implies x=\dfrac{-8}{2(1)}=-4[/tex]

To find the y-value of the vertex, substitute x = -4 into the equation:

[tex]\begin{aligned}\implies y&=(-4)^2+8(-4)+15\\&=16-32+15\\&=-16+15\\&=-1\end{aligned}[/tex]

Therefore, the minimum y-value of the function is y = -1, so the range is y ≥ -1.

Therefore, the following are true statement about the given equation:

The probability that the second child born to the couple will have blood type AB is 1/2.

Blood grouping is the categorization of blood into groups depending on the type of antigen and antibody present on the surface of red blood cells (RBCs).

The ABO blood grouping system, which includes A, B, AB, and O blood types, is the most well-known blood grouping system.

Blood group Rh (Rhesus) grouping system is another well-known blood grouping system that can be determined.

Therefore, the probability that the second child born to the couple will have blood type AB is 1/2.

50 percent of the offspring of this couple will inherit the gene for the ABO blood type A from the mother, while the remaining 50% will inherit the gene for the blood type B from the father.

The probability of inheriting the gene for blood type AB is thus 1/2 for a child born to these parents.

Learn more about probability at

https://brainly.com/question/31120123

#SPJ11

Answer:

The correct options are A and B.

For option A:

Sy = y = 3x - 10

Substituting x = -8 and y = 4:

4 = 3(-8) - 10

4 = -24 - 10

4 = -34

Since the left-hand side does not equal the right-hand side, (-8,4) is not a solution to the system.

For option B:

y = -1x + 10

Substituting x = -8 and y = 4:

4 = -1(-8) + 10

4 = 8 + 10

4 = 18 - Incorrect

For option C:

y = 5x + 24

y = 5(-8) + 24

y = -40 + 24

y = -16 - Incorrect

For option D:

y = 6x + 68

Substituting x = -8 and y = 4:

4 = 6(-8) + 68

4 = -48 + 68

4 = 20 - Incorrect

For option E:

y = -3x + 7

9 = -3(-8) + 7

9 = 24 + 7

9 = 31 - Incorrect

Therefore, options A and B are incorrect.

Answer:

Step-by-step explanation:

After running the given code, Karel will be at Street 2 and Avenue 2, facing North.

Here is a step-by-step explanation of what the code does:

   move(); - Karel moves one block east, to Street 1 and Avenue 2.

   turnLeft(); - Karel turns left to face north.

   putBall(); - Karel puts a ball at Street 1 and Avenue 2.

   turnLeft(); turnLeft(); turnLeft(); - Karel turns left three times to face south.

   move(); - Karel moves one block south to Street 2 and Avenue 2.

   turnLeft(); - Karel turns left to face east.

So after executing this code, Karel will be at Street 2 and Avenue 2, facing North.

To learn more about the code:

https://brainly.com/question/23275071

#SPJ11

We can graph this solution on the number line by placing a point at 7.6.

Graphs are visual representations of data or information. They are used to show relationships between different pieces of data and display numerical data in a more meaningful way. Graphs are made up of individual elements called nodes which are connected by edges. Nodes represent individual data points or pieces of information. Edges represent the relationship between two nodes and can represent either a physical or a logical link. Graphs can be used to represent many different types of data or information, such as social networks, transportation networks, and even biological relationships. Graphs are a powerful tool for understanding complex data sets, making them an essential tool for data analysis.

80∠ 10x + 4 = 20

80 10x + 4 = 20

80 - 4 = 10x

76 = 10x

7.6 = x

To learn more about graph

https://brainly.com/question/19040584

#SPJ1

We can graph this solution on the number line by placing a point at 7.6.

Graphs are visual representations of data or information. They are used to show relationships between different pieces of data and display numerical data in a more meaningful way. Graphs are made up of individual elements called nodes which are connected by edges. Nodes represent individual data points or pieces of information. Edges represent the relationship between two nodes and can represent either a physical or a logical link. Graphs can be used to represent many different types of data or information, such as social networks, transportation networks, and even biological relationships. Graphs are a powerful tool for understanding complex data sets, making them an essential tool for data analysis.

80∠ 10x + 4 = 20
80 10x + 4 = 20
80 - 4 = 10x
76 = 10x
7.6 = x

To learn more about graph
brainly.com/question/19040584
#SPJ1

The volume of the sphere which is equivalent to the lung capacity is approximately =2,571 cm³

To calculate the volume of a sphere the formula used = V = 4/3 πr³

Radius = 8.5 cm

First cube the radius = 8.5³ = 614.125

The, multiply r³ by π = r³×π = 614.125× 3.14= 1928.3525

Take this answer and multiply it by 4 = 4×1928.3525= 7713.41

Last, divide this answer by 3 = 7713.41/3 = 2571.136666

Therefore the volume of the balloon = 2,571 cm³(approximately)

Learn more about volume here:

https://brainly.com/question/27710307

#SPJ1

In the following question, option B, Juan McDonald is willing to pay $900 for a new iPad. he offers to pay $800 for an iPad at the apple store. it costs apple $700 to produce this iPad. A voluntary economic transaction between "Juan and Apple" will occur because it would be better off due to the transaction.

What is a voluntary economic transaction? Voluntary economic transactions involve willing buyers and willing sellers, and they usually involve the exchange of goods and services in return for money. In a free-market economy, people have the freedom to make voluntary economic transactions, and government intervention is minimal. What are the benefits of voluntary economic transactions? The benefits of voluntary economic transactions include the following: They are beneficial to both parties involved in the transaction.

The buyer obtains what they require, while the seller obtains the money they require. The exchange of goods and services for money encourages individuals to create, produce, and sell more. The economy is stimulated by increased economic activity, which leads to more job creation, more employment opportunities, and more revenue for the government. Juan McDonald is willing to pay $900 for a new iPad. He offers to pay $800 for an iPad at the Apple store. It costs Apple $700 to produce this iPad.A voluntary economic transaction between Juan and Apple will occur because it would be better off due to the transaction. So, the answer is option B: will; both Juan and Apple.

For more such questions on transaction

https://brainly.com/question/25263462

#SPJ11


At steady-state, the Laplace transform of the output is given by [tex]lim s->0 sC(s)[/tex]. If this limit exists, then the steady-state error is zero.

The transfer function of a plant with transfer function G(s) = 74109 is given.

We proceed in the following manner:

Step 1: Write the open-loop transfer function.[tex]G(s)D(s) = 74109 * (s+ci)/(s+c1) * K/(s+di)[/tex]

Step 2: Write the characteristic equation.(s + 6) (s + 3) (s2 + 3s + 9) = 0

Step 3: Compare the coefficients of the open-loop transfer function with the characteristic equation.

c1 + ci + di = 9c1ci + c1di + ci(di + 3) + K * 74109 = 27c1ci(di + 3) + K * 74109 * c1 = 81K * 74109 * di = 6 * 3 * 9 * (-74109)

Step 4: Solve for the parameters of the controller.The solution is obtained by solving the above equations.c2 = 18ci = 54co = 162di = 9

Step 5: Show that if the reference input to the system of the above exercise is a step of amplitude A, the steady-state error will be zero.The steady-state error can be calculated using the final value theorem. If the system is subjected to a step input of amplitude A, then the Laplace transform of the input is A/s.

The output of the system is given by[tex]C(s) = G(s)D(s) R(s)[/tex], where R(s) is the Laplace transform of the reference input. The steady-state error is given by the difference between the input and the output at steady-state. This can be calculated using the final value theorem.

for such more questions on Laplace transform

https://brainly.com/question/2272409

#SPJ11

Answer:

y= (5/3)x -4/3

Step-by-step explanation:

Slope obtained from the two points of the graph.

m=5/3

Points:  A(-1,-3).  B(2,2)

m=(y2-y1)/(x2-x1)

m=(2-(-3))/(2-(-1))

m=5/3

Replacing in the equation form: y=mx+b

y=(5/3)x+b

2=(5/3)2+b

2=10/3 +b

2-10/3= b

6/3 - 10/3 = b

b= -4/3

Joining all the terms we obtain:

y= (5/3)x -4/3

Answer: The slope is 5/3

Step-by-step explanation:

the poin at (2,2) is 5 up and 3 right of the point at (

-1,-3)

Answer:

-1, 2, 5 , 8 , 11   or  2, 5, 8, 11 , 14

Step-by-step explanation:

Assume n starts from 0

a(0) = 3 (0) -1 = -1
a(1) = 3 (1) -1 = 2
a(2) = 3 (2) -1 = 5
a(3) = 3 (3) -1 = 8
a(4) = 3 (4) -1 = 11

notice If we Assume n starts from 1

a(1) = 3 (1) -1 = 2
a(2) = 3 (2) -1 = 5
a(3) = 3 (3) -1 = 8
a(4) = 3 (4) -1 = 11
a(5)= 3 (5) -1 = 14

Notice a sequence can start from any N. But the most common ones are n=0 or n=1

The solution of the system goes to infinity as t gets large.

Consider the given system of differential equations: dx/dt = 3x + 4ydy/dt = −x − 2yNow, find the solution of the system:(2)   dx/dt + 2 dy/dt = 7xObserve the second equation and multiply it by 2:2  dy / dt = −2x − 4y(3)   dx/dt + 2 dy/dt = 3x − 4ySubstitute the value of dy/dt from (3) into (2):(2)   dx/dt + 3x − 4y = 7xSimplify this equation:dx/dt − 4x = 4yTake the laplace transform of both sides: Laplace{dx/dt − 4x} = Laplace{4y} ⇒ sX(s) − x(0) − 4X(s) = 4Y(s) ⇒ X(s) = {4Y(s)}/{s − 4}Now, find the Laplace transform of y(s):(1)   dy/dt = −x − 2y ⇒ Laplace{dy/dt} = −Laplace{x} − 2Laplace{y} ⇒ sY(s) − y(0) = −X(s) − 2Y(s) ⇒ Y(s) = {−X(s)}/{s + 2}Substitute the value of X(s) in the above equation, we get:Y(s) = {−4Y(s)}/[(s − 4)(s + 2)]Simplify this equation:Y(s) = {A}/{s − 4} + {B}/{s + 2}Now, find the values of A and B:Multiplying the above equation by (s − 4) and (s + 2), we get:Y(s) = A(s + 2) + B(s − 4)Simplify this equation:Y(s) = (A + B)s + 2A − 4BAs per the equation (3), we can say A + B = 0, 2A − 4B = −4On solving, we get A = 2, B = −2Therefore, the value of Y(s) is:Y(s) = {2}/{s − 4} − {2}/{s + 2}Now, substitute the value of X(s) and Y(s) in the following equation:dx/dt − 4x = 4yThe solution of the above differential equation is:x(t) = {2}/{3}e^{4t} − {5}/{3}e^{-2t}The above is the general solution of the given system of differential equations.Now, find what happens to the system as t gets large?As t gets large, the term {5}/{3}e^{-2t} will tend to zero and {2}/{3}e^{4t} will tend to infinity.

Learn more about infinity

brainly.com/question/16887086

#SPJ11

Answer: First one (the one you selected in the photo)

Step-by-step explanation:

If you need help draw a number line.

-8 is not equal to 8, as one is negative and the other is positive.

On a number line, -8 is to the left, meaning it is less, so the second one is false.

This means the first one is correct.

Answer:

14

Step-by-step explanation:

scores  10 10 12 13 14 15 18 19 19     Median score is the one in the middle

The measure of side E'F' of rectangle EFGH when dilated by a scale factor of 3 to form rectangle E'F'G'H' is 66 units.

Scale factor is used in mathematics, particularly in geometry and measurement, to describe the transformation of one figure into another through dilation or resizing. It is represented by a number or a ratio, such as 2:1 or 1/2, which indicates how many times larger or smaller the new figure is compared to the original. For example, if the side length of a square is doubled, the resulting square is four times larger in area, because the area of a square is proportional to the square of its side length. In this case, the scale factor of the dilation is 2, because the new square is twice as large as the original square. Scale factor is also used in maps, blueprints, and architectural drawings to represent the ratio between the actual size of an object or space and its representation on paper or screen.

Here,

If rectangle EFGH is dilated by a scale factor of 3 to form rectangle E'F'G'H', then all corresponding sides of the two rectangles are in the ratio of 3:1. Since EF measures 22, then the corresponding side E'F' of the dilated rectangle is:

E'F' = EF × scale factor

E'F' = 22 × 3

E'F' = 66 units

Therefore, the measure of side E'F' is 66.

To know more about scale factor,

https://brainly.com/question/30215119

#SPJ1