A metal(II) ion concentration of 0.01 mol/L with a molar mass of 58.93 g/mol results in a concentration of the metal(II) ion in units of mg/L (ppm) of 589.3 mg/L (ppm).
What is molar volume give example?One mole of a substance occupies a certain amount of space (designated by the symbol Vm) at a specific temperature and pressure. It is determined by dividing the substance's molecular mass (M) by its density () at the specified temperature and pressure. The SI unit for it is the cubic meter per mole (m3/mol). Cubic meters per mole (m3/mol) is the SI unit for molar volume. The moles per liter of a solution—the measurement of concentration molarity—are referred to as "molars" in this context. The phrase is most frequently used in chemistry to refer to a solute's molar concentration in a solution. Molar concentration is measured in mol/L or M.
Why is molar volume used?Thinking about things from the a molecular perspective is a beneficial quality. All perfect gases will have the same molar volume since they all have the same number density. This will be 22.4 L at STP. This is helpful if you want to visualize the separation of molecules in various samples.
A form's volume is essentially equal to the product of its area and height. Volume = Height x Base Area.
We can use the following formula to change the measurement of the metal(II) ion concentration from mol/L to mg/L (ppm):
concentration in mg/L = (concentration in mol/L) x (molar mass in g/mol) x 1000
The following formula can be used to change the concentration of the metal(II) ion from units of mol/L to mg/L (ppm), assuming the metal(II) ion has a molar mass of 58.93 g/mol:
concentration in mg/L = (concentration in mol/L) x (molar mass in g/mol) x 1000
concentration in mg/L = (concentration in mol/L) x (58.93 g/mol) x 1000
For instance, the concentration in mg/L would be as follows if the metal(II) ion concentration was 0.01 mol/L:
concentration in mg/L = (0.01 mol/L) x (58.93 g/mol) x 1000
concentration in mg/L = 589.3 mg/L or 589.3 ppm
To know more about Molar Volume visit:
https://brainly.com/question/29884686
#SPJ4
Calculate ka for weak acid HA which has a pH of 3.65 at 0.30 concentration.
Answer:
the Ka value for the weak acid HA is 1.18 x 10^(-7).
Explanation:
The pH of a weak acid solution can be related to the dissociation constant, Ka, of the acid through the following equation:
pH = pKa + log([A-]/[HA])
where pH is the measured pH of the solution, pKa is the negative logarithm of the acid dissociation constant, [A-] is the concentration of the conjugate base of the acid, and [HA] is the concentration of the undissociated acid.
In this problem, we are given the pH and the concentration of the weak acid, HA. We need to find the value of Ka.
First, we can rearrange the above equation to solve for pKa:
pKa = pH - log([A-]/[HA])
Next, we need to find the concentration of the conjugate base, [A-]. Since HA is a weak acid, we can assume that only a small fraction of it has dissociated into A- and H+ ions. At equilibrium, the concentration of A- can be assumed to be equal to the concentration of H+ ions produced by the dissociation of HA. We can calculate this concentration from the pH:
[H+] = 10^(-pH) = 10^(-3.65) = 2.24 x 10^(-4) M
Therefore, [A-] = 2.24 x 10^(-4) M.
We can now substitute the values we have calculated into the equation for pKa to obtain:
pKa = 3.65 - log(2.24 x 10^(-4)/0.30) = 3.65 + 2.47 = 6.12
Finally, we can calculate the Ka value from the pKa:
Ka = 10^(-pKa) = 10^(-6.12) = 1.18 x 10^(-7)
Therefore, the Ka value for the weak acid HA is 1.18 x 10^(-7).
Answer:
the Key value for the weak acid HA is 1.18 x 10^(-7).
Explanation:
The pH of a weak acid solution can be related to the dissociation constant, Key, of the acid through the following equation:
pH = pKa + log([A-]/[HA])
where pH is the measured pH of the solution, pKa is the negative logarithm of the acid dissociation constant, [A-] is the concentration of the conjugate base of the acid, and [HA] is the concentration of the UN dissociated acid.
In this problem, we are given the pH and the concentration of the weak acid, HA. We need to find the value of Ka.
First, we can rearrange the above equation to solve for pKa:
pKa = pH - log([A-]/[HA])
Next, we need to find the concentration of the conjugate base, [A-]. Since HA is a weak acid, we can assume that only a small fraction of it has dissociated into A- and H+ ions. At equilibrium, the concentration of A- can be assumed to be equal to the concentration of H+ ions produced by the dissociation of HA. We can calculate this concentration from the pH:
[H+] = 10^(-pH) = 10^(-3.65) = 2.24 x 10^(-4) M
Therefore, [A-] = 2.24 x 10^(-4) M.
We can now substitute the values we have calculated into the equation for pKa to obtain:
pKa = 3.65 - log(2.24 x 10^(-4)/0.30) = 3.65 + 2.47 = 6.12
Finally, we can calculate the Ka value from the pKa:
Ka = 10^(-pKa) = 10^(-6.12) = 1.18 x 10^(-7)
Therefore, the Ka value for the weak acid HA is 1.18 x 10^(-7).
S + 6 HNO3 --> H2SO4 + 6 NO2 + 2 H2O
In the above equation how many moles of water can be made when 177.3 grams of HNO3 are consumed?
Round your answer to the nearest tenth. If you answer is a whole number like 4, report the answer as 4.0
Use the following molar masses. If you do not use these masses, the computer will mark your answer incorrect.:
Element
Molar Mass
Hydrogen
1
Nitrogen
14
Sulfur
32
Oxygen
16
Answer:
sulfur. 14.
Explanation:
ccbhh Ivonne
Answer:
sulfur. 14.
ccbhh Ivonne
Explanation:
select all of the factors that affect the rate of a chemical reaction. check all that apply a. amount of enzyme b. amount of enzyme substrate concentration c. substrate concentration ph of the reaction environment d. ph of the reaction environment e. temperature of the reaction environment
From given options, A, B, C, and D are all valid responses because they are all circumstances that can impact an enzyme's activity.
Enzyme catalyzed reaction Molecules move more quickly as a result of a rise in temperature, which increases the likelihood of collisions between substrates and enzymes and, ultimately, elevates enzymatic activity. As a result, there are fewer collisions and fewer enzymatic reactions as a result of a drop in temperature rather than a rise in the velocity of these molecules. Due to the ability of charges on the enzyme's amino acids to alter with pH, a change in the pH of the environment in which the enzyme is present may result in a change in the shape of the enzyme. This could change the enzyme's active site, improving or decreasing the enzyme's ability to bind substrate.For more information on rate of reaction kindly visit to
https://brainly.com/question/30546888
#SPJ1
What quantity of moles of C are formed upon complete reaction of 2 mol of B according to the generic chemical reaction: A + 2B = C
1 mole of C are formed upon complete reaction of 2 mol of B according to the generic chemical reaction.
What is moles?In the International System of Units, the mole (sign mol) is the unit of material quantity (SI). The amount of material is a measurement that indicates how many elementary constituents of a certain substance are present inside of an object or sample.
The mole has been defined as having 6.022×10²³ basic entities. An elementary entity can be an atom, chemical molecule, an ion, and ion pair, or perhaps a subatomic particle like an electron, depending on the substance.
A + 2B → C
moles of B = 2
the mole ratio between C and B is 1:2
moles of C= 1 mole
Therefore, 1 mole of C are formed upon complete reaction of 2 mol of B according to the generic chemical reaction.
To learn more about moles, here:
https://brainly.com/question/15209553
#SPJ6
the density of copper decreases as temperature increases. which statement accurately describes the changes in a sample of copper when it is warmed from room tempereature to 7b c
The statement that is accurately describes the changes in the sample of copper when it is warmed from the room temperature to 95° Celsius is the correct option is c. The sample will expand.
The density is expressed as follows :
The Density = mass / volume
The density is define as the mass of the sample per unit volume. It is clear from the above equation that the density is directly proportional to the mass and the volume is inversely proportional to the density. Therefore the sample will expand if the density of the sample decreases as the temperature increases.
To learn more about density here
https://brainly.com/question/29775886
#SPJ4
This question is incomplete, the complete question is :
The density of copper decreases as temperature increases. Which statement accurately describes the changes in a sample of copper when it is warmed from room temperature to 95° Celsius?
a. The sample will become lighter.
b. The sample will become heavier.
c. The sample will expand.
d. The sample will contract.
Calculate the number of particles in 5.5g of Mn
According to the concept of Avogadro's number, there are 0.60×10²³ number of particles in 5.5 g of manganese.
What is Avogadro's number?Avogadro's number is defined as a proportionality factor which relates number of constituent particles with the amount of substance which is present in the sample.
It has a SI unit of reciprocal mole whose numeric value is expressed in reciprocal mole which is a dimensionless number and is called as Avogadro's constant.It relates the volume of a substance with it's average volume occupied by one of it's particles .
It is calculated as, 5.5/ 54.93×6.023×10²³=0.60×10²³ particles.
Learn more about Avogadro's number,here:
https://brainly.com/question/24175158
#SPJ9
(A) H2SO3 (B) SO3/ Which of the following reagent(s) can be used to convert nitrobenzene to m-nitrobenzenesulfonic acid Fe (C) H2SO3/Fe (D) H2SO4/Al2(SO4)3 (E) H2SO4.SO3
The reagent that can be used to convert nitrobenzene to m-nitrobenzenesulfonic acid is (A) H2SO3.
The conversion of nitrobenzene to m-nitrobenzenesulfonic acid involves the introduction of a sulfonic acid group (-SO3H) at the meta position of the benzene ring. This can be achieved by treating nitrobenzene with a sulfonating agent such as sulfuric acid (H2SO4) or sulfuryl chloride (SO2Cl2).
However, in the given options, only reagent (A) H2SO3 is a sulfonating agent. When nitrobenzene is treated with H2SO3, it undergoes sulfonation at the meta position to form m-nitrobenzenesulfonic acid. The reaction can be represented as follows:
NO2C6H5 + H2SO3 → NO2C6H4SO3H + H2O
None of the other reagents listed are capable of sulfonating nitrobenzene to form m-nitrobenzenesulfonic acid.
Learn more about reagent here:
https://brainly.com/question/28463799
#SPJ4
Use the reaction below to calculate the number of grams of Al2O3 that could formed if 12.5 g O2 react completely with aluminum? (Answer: 26.6 g Al2O3)
4Al + 3O2 -> 2Al2O3
The number of grams of Al2O3 that can be formed if 12.5 g of O2 reacts completely with aluminum is 26.6 g.
The balanced chemical equation for the reaction is:
4Al + 3O2 -> 2Al2O3
From above,
We can conclude that,
4 moles of Al react with 3 moles of O2 to produce 2 moles of Al2O3.
Now using the above expression for calculating the number of moles of Al2O3 that can be produced from 12.5 g of O2.
For finding the number of moles, converting the mass of O2 to moles using its molar mass:
molar mass of O2 = 32.00 g/mol
moles of O2 = mass / molar mass = 12.5 g / 32.00 g/mol = 0.391 mol
Next, using the mole ratio from the balanced chemical equation to determine the number of moles of Al2O3 that can be produced:
moles of Al2O3 = (2/3) * moles of O2 = (2/3) * 0.391 mol = 0.261 mol
Now converting the number of moles of Al2O3 to grams using its molar mass:
molar mass of Al2O3 = 101.96 g/mol
So, the value of mass of Al2O3 will be
= moles of Al2O3 * molar mass = 0.261 mol * 101.96 g/mol = 26.6 g
For more questions on Balanced Chemical equation
https://brainly.com/question/26694427
#SPJ4
TRUE/FALSE. At the atomic scale, elastic deformation corresponds to breaking of interatomic bonds whereas plastic deformation corresponds to stretching of interatomic bonds.
It is false that, At the atomic scale, elastic deformation corresponds to breaking of interatomic bonds whereas plastic deformation corresponds to stretching of interatomic bonds.
What is elastic deformation?
Elastic deformation is the temporary shape change that occurs when a material is subjected to a force. It is a reversible process that returns to its original shape when the force is removed. This type of deformation is seen in materials such as rubber, metal and wood.
Therefore, It is false that, At the atomic scale, elastic deformation corresponds to breaking of interatomic bonds whereas plastic deformation corresponds to stretching of interatomic bonds.
To learn more about elastic deformation
Here: https://brainly.com/question/18375198
#SPJ4
How many calories of heat (energy) would it take to heat 23.0 g of water from 35.0 °C to 59.0 °C?
q= cal
How many kilocalories of heat (energy) would it take to heat 107.0 g of water from 23.0 °C to 85.0 °C?
q= kcal
24940 kcal ,calories of heat (energy) would it take to heat 23.0 g of water from 35.0 °C to 59.0 °C.
What are calories in food?Calories are the amount of energy released when your body breaks down (digests and absorbs) food. The more calories a food has, the more energy it can provide to your body. When you eat more calories than you need, your body stores the extra calories as body fat.
How to burn calories?Moderate aerobic exercise includes activities such as brisk walking, biking, swimming and mowing the lawn. Vigorous aerobic exercise includes activities such as running, heavy yardwork and aerobic dancing. Strength training. Do strength training exercises for all major muscle groups at least two times a week.
To know more about calories visit
https://brainly.com/question/14213632
#SPJ1
. which statement best describes how to choose the most suitable solvent to purify a solid by recrystallization
The compound to be purified must be soluble in the hot solvent and insoluble in the cold solvent. This is because during recrystallization, the compound is dissolved in the hot solvent to remove impurities, and then cooled to allow the compound to crystallize out of solution. If the compound is insoluble in the cold solvent, it will form pure crystals while impurities remain in solution. So the correct option is D.
Choosing the right solvent for recrystallization is crucial to ensure that the process is effective in purifying the compound. The solvent must be able to dissolve the compound at high temperatures to remove impurities, but then allow the compound to crystallize out of solution as the solvent cools.
By selecting a solvent in which the compound is soluble at high temperatures but insoluble at low temperatures, pure crystals of the compound can be obtained.
The complete question is given below
"
Which statement below best describes the reasoning behind choosing the most
suitable solvent to purify a sold by recrystalization ? Clearly choose one answer.
a) The compound to be purified must be soluble in both the hot solvent and the
cold solvent.
b) The compound to be purified must be insoluble in both the hot solvent and
the cold solvent.
c) The compound to be purified must be insoluble in the hot solvent and
soluble in the cold solvent.
d) The compound to be purified must be soluble in the hot solvent and
insoluble in the cold solvent.
"
You can learn more about recrystallization at
https://brainly.com/question/16835395
#SPJ4
Which of the following is a mineral?Group of answer choicesmaterial with crystals of different chemical compoundsNone of these choices are correct.volcanic glasscrystals grown in a laboratoryice
Answer: I don't have an answer,
Explanation: You have terrible spelling and pronunciation
When trying to measure the density of your solution, you do not quantitatively transfer the solution (there is still some in the graduated cylinder when you obtain the volume in Part D). How will this error affect the calculated density (will the resulting calculated density be too high, too low or unaffected)?
If you do not quantitatively transfer the solution and there is still some in the graduated cylinder when you obtain the volume in Part D, the resulting calculated density will be too high.
This is because the volume you measure will be lower than the actual volume of the solution, but the mass will remain the same.
Since density is calculated by dividing mass by volume (density = mass/volume), a lower volume will result in a higher calculated density.
Therefore, it is important to accurately transfer and measure the solution in order to obtain an accurate calculation of density.
To know more about density click on below link:
https://brainly.com/question/29775886#
#SPJ11
48g of Magnesium reacts with excess oxygen to produce 84g of magnesium oxide. Calculate how much magnesium oxide would be produced if 2g, 10, and 4kg were reacted with excess oxygen. 0.4 Moles of iron reacts with 0.3 moles of oxygen gas. Calculate the formula of the iron oxide produced and write a balanced equation for it.
don't spam-
1. The mass of magnesium oxide produced would be 6630.5 g.
2. The formula of the iron oxide would be Fe2O3.
Stoichiometric problem1. Calculation of magnesium oxide produced:
The balanced chemical equation for the reaction of magnesium with oxygen is:
2 Mg + O2 → 2 MgO
For 2 g of magnesium:
Number of moles of Mg = mass / molar mass = 2 / 24.31 = 0.082 moles
According to the balanced equation, 2 moles of Mg produce 2 moles of MgO
Therefore, 0.082 moles of Mg will produce 0.082 moles of MgO
Mass of MgO = number of moles of MgO * molar mass of MgO = 0.082 * 40.31 = 3.29 g
For 10 g of magnesium:
Number of moles of Mg = mass / molar mass = 10 / 24.31 = 0.411 moles
According to the balanced equation, 2 moles of Mg produce 2 moles of MgO
Therefore, 0.411 moles of Mg will produce 0.411 moles of MgO
Mass of MgO = number of moles of MgO * molar mass of MgO = 0.411 * 40.31 = 16.54 g
For 4 kg of magnesium:
Number of moles of Mg = mass / molar mass = 4000 / 24.31 = 164.5 moles
According to the balanced equation, 2 moles of Mg produce 2 moles of MgO
Therefore, 164.5 moles of Mg will produce 164.5 moles of MgO
Mass of MgO = number of moles of MgO * molar mass of MgO = 164.5 * 40.31 = 6630.5 g or 6.63 kg
2. Calculation of formula of iron oxide produced:
The balanced chemical equation for the reaction between iron and oxygen is:
4 Fe + 3 O2 → 2 Fe2O3
According to the equation, 4 moles of Fe react with 3 moles of O2 to produce 2 moles of Fe2O3. Therefore, the molar ratio of Fe to O2 is 4:3.
Given that 0.4 moles of Fe react with 0.3 moles of O2, the ratio of Fe to O2 in the reaction is:
Fe:O2 = 0.4/0.3 = 4/3
This ratio is equivalent to the molar ratio in the balanced equation, which means that the reaction produces the stoichiometric amount of Fe2O3. Therefore, the formula of the iron oxide produced is Fe2O3.
More on stoichiometric problems can be found here: https://brainly.com/question/29775083
#SPJ1
specify the hydrogen bonding behavior of the 4 species below by selecting: donor for species that act as donors only acceptor for species that act as acceptors only both for species that act as both donors and acceptors neither for species that act neither as donors nor as acceptors.
The 4 species below which specify the hydrogen bonding behavior are:
Water (H2O): both (acts as both donor and acceptor)
Methanol (CH3OH): both (acts as both donor and acceptor)
Ammonia (NH3): donor (acts as a donor only)
Carbon dioxide (CO2): neither (does not act as a donor or acceptor)
Hydrogen bonding is a type of intermolecular force that occurs between a hydrogen atom bonded to a highly electronegative atom such as nitrogen, oxygen, or fluorine, and an electronegative atom in a nearby molecule.
The hydrogen atom has a partial positive charge due to the electronegativity difference between the bonded atoms, and the electronegative atom in the nearby molecule has a partial negative charge. These opposite charges attract each other, forming a relatively strong electrostatic interaction called a hydrogen bond.
Hydrogen bonding is responsible for many important properties of substances, including the high boiling and melting points of water, the high heat of vaporization of water, and the unique structure and properties of biomolecules such as DNA and proteins.
To know more about hydrogen bonding here
https://brainly.com/question/29758318
#SPJ4
please help me with it
The mass of CaCO₃ can be obtained as follow:
Molar mass of CaCO₃ = 100.09 g/mol Mole of CaCO₃ = 1.23 moleMass of CaCO₃ = ?Mole = mass / molar mass
1.23 = Mass of CaCO₃ / 100.09
Cross multiply
Mass of CaCO₃ = 1.23 × 100.09
Mass of CaCO₃ = 123.11 g
How do I determine the mole?The mole of C₁₂H₂₂O₁₁ can be obtained as follow:
Molar mass of C₁₂H₂₂O₁₁ = 342.34 g/mol Mass of C₁₂H₂₂O₁₁ = 65.32 g Mole of C₁₂H₂₂O₁₁ =?Mole = mass / molar mass
Mole of C₁₂H₂₂O₁₁ = 65.32 / 342.34
Mole of C₁₂H₂₂O₁₁ = 0.19 mole
How do I determine the mole?The mole of Ba₃(PO₄)₂ can be obtained as follow:
Molar mass of Ba₃(PO₄)₂ = 601.93 g/mol Mass of Ba₃(PO₄)₂ = 146 g Mole of Ba₃(PO₄)₂ =?Mole = mass / molar mass
Mole of Ba₃(PO₄)₂ = 146 / 601.93
Mole of Ba₃(PO₄)₂ = 0.24 mole
How do I determine the mass?The mass of F₂ can be obtained as follow:
Molar mass of F₂ = 38 g/mol Mole of F₂ = 3.25 molesMass of F₂ = ?Mole = mass / molar mass
3.25 = Mass of F₂ / 100.09
Cross multiply
Mass of F₂ = 3.25 × 38
Mass of F₂ = 123.5 g
How do I determine the mole?The mole of Mg(OH)₂ can be obtained as follow:
Molar mass of Mg(OH)₂ = 58.87 g/mol Mass of Mg(OH)₂ = 760 g Mole of Mg(OH)₂ =?Mole = mass / molar mass
Mole of Mg(OH)₂ = 760 / 58.87
Mole of Mg(OH)₂ = 12.91 moles
How do I determine the mass?The mass of Fe₂O₃ can be obtained as follow:
Molar mass of Fe₂O₃ = 159.7 g/mol Mole of Fe₂O₃ = 0.234 moleMass of Fe₂O₃ = ?Mole = mass / molar mass
0.234 = Mass of Fe₂O₃ / 159.7
Cross multiply
Mass of Fe₂O₃ = 0.234 × 159.7
Mass of Fe₂O₃ = 37.37 g
Learn more about mass:
https://brainly.com/question/21940152
#SPJ1
The chemical symbols of several elements are provided. Give the corresponding name of the element. Spelling counts. K: ___Mn: __Ge: ___Kr____
The chemical names are, K: Potassium, Mn: Manganese, Ge: Germanium, Kr: Krypton.
Chemical symbols are shorthand notations used to represent the chemical elements in a concise and standardized manner. They consist of one or two letters, usually derived from the name of the element, and are used in chemical formulas, equations, and other types of chemical notation.
For example, the symbol K represents the element potassium, which has an atomic number of 19 and a chemical symbol of K derived from its Latin name kalium. Similarly, Mn represents the element manganese, which has an atomic number of 25 and a symbol derived from its Greek name magnesia.
To know more about the chemical symbols, here
brainly.com/question/29285074
#SPJ4
--The complete question is, The chemical symbols of several elements are provided. Give the corresponding name of the element.
K
Mn
Ge
Kr--
Correctly classify each of the following compounds as highly soluble or as either slightly soluble or insoluble in water. Drag the appropriate compounds to their respective bins NaCl CHCl3 CH2OH KOH C5H5 C6H24 KNO3 CCl4 Na2SO4 CH2CH2OH CH2Cl2 CH3COOH CH3(CH2)5OH Highly Soluble Slightly soluble or insoluble
NaCl, KOH, C5H5, C6H24, KNO3, Na2SO4, CH2CH2OH are highly soluble in water and CHCl3, CH2OH, CCl4, CH2Cl2, CH3COOH, and CH3(CH2)5OH are either slightly soluble or insoluble in water.
The solubility of a compound in water refers to the ability of that compound to dissolve in water. Compounds that are highly soluble in water can easily dissolve in water, while those that are slightly soluble or insoluble cannot dissolve or dissolve only to a limited extent.
The solubility of a compound in water depends on several factors, including the chemical structure of the compound, the temperature and pressure of the solvent, and the presence of other solutes in the solvent.
Some common examples of highly soluble compounds in water include ionic compounds such as sodium chloride and potassium hydroxide, while nonpolar compounds such as chloroform and carbon tetrachloride are generally insoluble in water.
To know more about soluble here
https://brainly.com/question/24285799
#SPJ4
which one of the following statements about the following reaction is false? ch4(g) 2o2(g) ----------------- co2(g) 2h2o(g) Every methane molecule that reacts produces two water molecules.
If 32.0 g of oxygen reacts with excess methane, the maximum amount of carbon dioxide produced will be 22.0 g.
If 11.2 liters of methane react with an excess of oxygen, the volume of carbon dioxide produced at STP is (44/16)(11.2) liters.
If 16.0 g of methane react with 64.0 g of oxygen, the combined masses of the products will be 80.0 g.
If 22.4 liters of methane at STP react with 64.0 g of oxygen, 22.4 liters of carbon dioxide at STP can be produced.
The false statement is, "Every methane molecule that reacts produces two water molecules." Option a is correct choice.
The balanced equation for the combustion of methane is CH₄ + 2O₂ → CO₂ + 2H₂O. This means that for every molecule of methane that reacts, only two molecules of water are produced, not two molecules of water for every methane molecule. Therefore, the statement that "every methane molecule that reacts produces two water molecules" is false.
Not every methane molecule that reacts produces two water molecules. Rather, for every methane molecule that reacts, two water molecules are produced. So the correct statement would be: For every molecule of CH₄ that reacts, two molecules of H₂O are produced.
To know more about the methane, here
brainly.com/question/2127750
#SPJ4
--The complete question is, Which one of the following statements about the following reaction is false? CH₄ + 2O₂ → CO₂ + 2H₂O.
a. Every methane molecule that reacts produces two water molecules.
b. If 32.0 g of oxygen reacts with excess methane, the maximum amount of carbon dioxide produced will be 22.0 g.
c. If 11.2 liters of methane react with an excess of oxygen, the volume of carbon dioxide produced at STP is (44/16)(11.2) liters.
d. If 16.0 g of methane react with 64.0 g of oxygen, the combined masses of the products will be 80.0 g.
e. If 22.4 liters of methane at STP react with 64.0 g of oxygen, 22.4 liters of carbon dioxide at STP can be produced.--
A balloon takes up 625L at 0°C. If it is heated to 80°C, what will its new volume be?
PLS SOMONE HELP I KNOW THE PHOTO ISNT THAT GOOD BUT I REALLY NEED HELP I WILL MARK AS BRAINLIEST AND GIVE 5 STARS ASWELL AS A HEART PLSS
5. If iron filings are added to the reaction above, and they are allowed to rust
according to the following reaction, then they will remove the oxygen from the
above reaction. How will equilibrium shift upon addition of iron?
4 Fe (s) + 3 O2 (g) 2 Fe2O3 (S)
Upon addition of iron, the equilibrium will shift toward forward according to Le Chatelier’s principle in the reaction 4 Fe (s) + 3 O[tex]_2[/tex] (g) →2 Fe[tex]_2[/tex]O[tex]_3[/tex] (S)
What is equilibrium?Equilibrium is commonly characterized as a condition of rest in which no change occurs. A body in equilibrium will have no negative or positive energy exchanges.
The equilibrium state is defined differently in biology, physics, and chemistry. However, the underlying principle remains the same. External forces will have little effect on an organism that is in balance. Upon addition of iron, the equilibrium will shift toward forward according to Le Chatelier’s principle in the reaction 4 Fe (s) + 3 O[tex]_2[/tex] (g) →2 Fe[tex]_2[/tex]O[tex]_3[/tex] (S)
Therefore, upon addition of iron, the equilibrium will shift towards forward according to Le Chatelier’s principle.
To learn more about equilibrium, here:
https://brainly.com/question/30104201
#SPJ9
the overall photosynthesis reaction is , 6 CO2 (g) + 6 H2O (l) ? C6H12O6 (s) + 6 O2 (g) ?H° = +2802 kJ
suppose that the reaction is at equilibrium. state the effect that each of the following changes will have on the equilibrium composition: tends to shift toward the formation of reactants, tends to shift toward the formation of products, or has no effect. (a) the partial pressure of is increased. (b) the system is compressed. (c) the amount of is increased. (d) the temperature is increased. (e) some of the is removed. (f) water is added. (g) the partial pressure of is decreased.
a) If the partial pressure of CO2 is increased, the equilibrium will tend to shift towards the formation of products (C6H12O6 and O2) to reduce the concentration of CO2.
(b) If the system is compressed, the equilibrium will tend to shift towards the formation of products (C6H12O6 and O2) to reduce the number of gas molecules.
What is Equilibrium?
In chemistry, equilibrium is a state in a chemical reaction where the rate of the forward reaction is equal to the rate of the reverse reaction. At equilibrium, the concentrations of the reactants and products remain constant over time, although the reactants are still being converted into products and vice versa.
When a system is at equilibrium, the concentrations of reactants and products are said to be in balance. This means that the concentrations of the reactants and products are no longer changing, even though the reaction is still ongoing. At equilibrium, the concentrations of reactants and products are related by a constant called the equilibrium constant (K), which depends on the specific reaction conditions such as temperature and pressure.
c) If the amount of H2O is increased, the equilibrium will tend to shift towards the formation of products (C6H12O6 and O2) to consume the excess water.
(d) If the temperature is increased, the equilibrium will tend to shift towards the formation of products (C6H12O6 and O2) because the reaction is endothermic and increasing the temperature favors the endothermic reaction.
(e) If some of the O2 is removed, the equilibrium will tend to shift towards the formation of products (C6H12O6 and O2) to compensate for the loss of O2.
(f) If water is added, the equilibrium will tend to shift towards the formation of reactants (CO2 and H2O) to consume the excess water.
(g) If the partial pressure of O2 is decreased, the equilibrium will tend to shift towards the formation of reactants (CO2 and H2O) to compensate for the loss of O2.
Learn more about Equilibrium from given link
https://brainly.com/question/517289
#SPJ4
When chlorine is added to acetylene, tetrachloroethaneis formed:
2 Cl2(g)+ C2H2(g)-->C2H2Cl4(l)
How many liters of chlorine at STP will be needed to make 75.0 grams of C2H2Cl4? Use 4 sig figs.
_____ L Cl2
50 points
Answer:
Explanation:
To determine the amount of chlorine needed to make 75.0 grams of C2H2Cl4, we need to balance the chemical equation and then use the molar ratio between the reactants and product to find the amount of Cl2 needed.
The balanced equation is:
2 Cl2(g) + C2H2(g) -> C2H2Cl4(l)
Next, we can use the molar mass of C2H2Cl4 to find the number of moles of C2H2Cl4 produced:
75.0 g C2H2Cl4 x (1 mole C2H2Cl4 / 153.8 g C2H2Cl4) = 0.489 moles C2H2Cl4
Since the balanced equation has a 1:2 ratio of C2H2 to Cl2, this means that we need 2 moles of Cl2 for every mole of C2H2Cl4 produced. Therefore, we will need 2 x 0.489 moles = 0.978 moles of Cl2.
Finally, to find the volume of Cl2 at STP, we can use the ideal gas law:
PV = nRT
Where P is pressure, V is volume, n is the number of moles, R is the ideal gas constant (0.0821 L-atm/mol-K), and T is the temperature in Kelvin (273 K).
Since the pressure is 1 atm and the temperature is 273 K, we can rearrange the equation to solve for volume:
V = nRT / P = 0.978 moles x 0.0821 L-atm/mol-K x 273 K / 1 atm = 17.1 L
Therefore, 17.1 liters of Cl2 at STP will be needed to make 75.0 grams of C2H2Cl4.
How many atoms are in 3.65 mol of titanium
1.25 x 1025 atoms
2.20 x 1023 atoms
4.52 x 1023
3.61 atoms
2.20×10²³ atoms are in 3.65 mol of titanium. Therefore, the correct option is option B among all the given options.
What is titanium?Titanium has the chemical symbol Ti and the atomic number 22. It is only found in nature as an oxide, but it may be reduced to form a beautiful transition metal with such a silver hue, low density, as well as high strength that is corrosion resistant in sea water, aqua regia, as well as chlorine.
number of atoms = number of mole× 6.022×10²³
substituting all the given values in the above equation, we get
number of atoms = 3.65 mol× 6.022×10²³
= 2.20×10²³ atoms
Therefore, the correct option is option B.
To learn more about titanium, here:
https://brainly.com/question/17005129
#SPJ1
Determine the number of valence electrons for each of the atoms. Enter each answer as a numeral. For example, if an atom has two valence electrons, enter the number 2.B:P:O:Ne:
The number of the valence electrons for each of the atoms :
B = 3
P = 5
O = 6
Ne = 8
The Valence electrons are the electrons that is in the outermost shell, or energy level, of an atom. The valence electron is the electron in the outer shell that is associated with the atom, and that will participate in the formation of the bonds and the compounds.
The atomic number of the boron is 3. The valence electrons are 3 electrons in the outermost shell. The atomic number of the phosphorus is 5. The valence electrons are 5 electrons in the outermost shell. atomic number of the oxygen is 6. The valence electrons are 6 electrons in the outermost shell. The atomic number of the boron is 8. The valence electrons are 8 electrons in the outermost shell.
To learn more about valence electrons here
https://brainly.com/question/17426757
#SPJ4
____________ occur when partially positive ____________ attract partially negative atoms nearby. Examples include the ____________ .
"Hydrogen bonds occur when partially positive hydrogen atoms attract partially negative atoms nearby. Examples include the bonds between water molecules, ammonia molecules, and DNA base pairs."
Hydrogen bonds are a type of intermolecular force that occurs when a hydrogen atom that is covalently bonded to an electronegative atom (such as nitrogen, oxygen, or fluorine) interacts with another electronegative atom nearby.
The hydrogen atom has a partial positive charge because it is less electronegative than the other atom it is bonded to, while the other atom has a partial negative charge because it is more electronegative.
Hydrogen bonds are important for many biological processes, including the structure of DNA and the properties of water. The bonds between water molecules, for example, are hydrogen bonds that contribute to the high boiling point, surface tension, and other unique properties of water.
To know more about Hydrogen bonds here
https://brainly.com/question/11679211
#SPJ4
The skin burn when an ant bites why.
Answer:
ants release a chemical called formic acid onto your skin when they bite
after the equilibrium represented above is established, some pure o2(g) is injected into the reaction vessel at constant temperature. after equilibrium is reestablished, which of the following has a lower value compared to its value at the original equilibrium?
The amount of SO₂(g) in the reaction vessel has a lower value compared to its value at the original equilibrium. Option d is correct choice.
Injecting pure O₂(g) into the reaction vessel at a constant temperature will cause the system to shift towards the right side of the equation in order to consume the added O₂. This means that the amount of SO₂(g) in the reaction vessel will decrease, while the amount of SO₃(g) and O₂(g) will increase.
Since the reaction is exothermic, adding O₂(g) will not change the equilibrium constant (Keq) of the reaction, so (A) is not affected. However, the amount of O₂(g) in the reaction vessel will increase, so (C) has a higher value compared to its value at the original equilibrium.
To know more about the equilibrium, here
brainly.com/question/23975996
#SPJ4
--The complete question is, 2SO(g) <-> 2SO₂(g) + O₂(g)
After the eq. represented above is established, some pure O₂(g) is injected into the reaction vessel at a constant temperature. After equilibrium is reestablished, which of the following has a lower value compared to its value at the original equilibrium?
A. Keq for the reaction
B. The amount of SO₃(g) in the reaction vessel
C. The amount of O₂(g) in the reaction vessel.
D. The amount of SO₂(g) in the reaction vessel.--
4. Based on the data below, what is the average atomic mass of chromium?
Isotope
Cr-50
Cr-52
Cr-53
Cr-54
OA. 52.000
OB. 52.250
OC. 52.057
OD. 52.925
Percentage
4.3
83.8
9.5
2.4
52.057g/mole is the average atomic mass of chromium. The correct option is option C among all the given options.
What is average atomic mass?Meaning of Average Atomic Mass: To be more specific, the average atomic mass is defined as "the sum of the atomic masses of any and all isotopes of a particular element, each calculated by respective natural abundance on Earth." This is a straightforward explanation of average atomic weight.
The mass of such an atom is measured by its atomic weight (ma or m). Although the kilogram (symbol: kg) is the SI unit of mass, atomic mass is frequently stated inside the non-SI unit Dalton (symbol: Da) - equivalently, united atomic mass unit (u).
average atomic mass = 50×4.3 + 52×83.8 + 53×9.5 + 54×2.4= 52.057g/mole
Therefore, 52.057g/mole is the average atomic mass of chromium. The correct option is option C.
To know more about average atomic mass, here:
https://brainly.com/question/13753702
#SPJ9