To find the Notes Payable balance, we need to use the accounting equation:
Assets = Liabilities + Equity
We are given the following information:
AP = $2,500
Building = $31,250
Land = $30,000
Notes Payable = ?
Retained Earnings = $125,000
AR = $18,750
Cash = $67,500
Equipment = $40,000
Capital Stock = $12,500
We can add up the assets to get:
Assets = AP + Building + Land + AR + Cash + Equipment
= $2,500 + $31,250 + $30,000 + $18,750 + $67,500 + $40,000
= $190,000
We can rearrange the accounting equation to solve for liabilities:
Liabilities = Assets - Equity
Plugging in the values we have:
Liabilities = $190,000 - ($125,000 + $12,500)
= $190,000 - $137,500
= $52,500
Therefore, the Notes Payable balance is:
Notes Payable = Liabilities - AP
= $52,500 - $2,500
= $50,000
What are the equations of the line through point (6,2) and perpendicular to the line defined by the equation 4x+5y+7=0?
The equation of the line through point (6,2) and perpendicular to 4x+5y+7=0 is 5x-4y+14=0.
To find the equation of a line perpendicular to another line, we first need to determine the slope of the original line. We can rewrite the original line as 5y = -4x - 7, which is in the slope-intercept form y = (-4/5)x - 7/5. The slope of this line is -4/5.
Since the line we want is perpendicular to this line, it must have a slope that is the negative reciprocal of -4/5. The negative reciprocal is 5/4. We can use the point-slope form of the equation of a line to find the equation of the new line. Plugging in the point (6,2) and the slope 5/4, we get:
y - 2 = (5/4)(x - 6)
Simplifying and rearranging, we get:
5x - 4y + 14 = 0
So, the equation of the line through the point (6,2) and perpendicular to 4x+5y+7=0 is 5x-4y+14=0.
Learn more about Perpendicular Line:
https://brainly.com/question/1202004
#SPJ4
A rock is thrown upward with a velocity of 22
meters per second from the top of a 45
meter high cliff, and it misses the cliff on the way back down. When will the rock be 9
meters from ground level? Round your answer to two decimal places.
Gravity Formula
The required time hen will the rock be 9 meters from ground level is 6.40 seconds.
How to find time period of particle between two points?We can use the kinematic equations of motion to solve this problem. The equation we need is:
h = vi(t) + (1/2)at²
where h is the height of the rock above the ground at time t, vi is the initial velocity (positive when upward), a is the acceleration due to gravity (negative), and t is the time elapsed.
At the top of the cliff, the initial height h₀ = 45 meters and the initial velocity vi = 22 meters per second. When the rock is 9 meters above ground level, its height h = 9 meters. We want to find the time t at which this occurs.
First, we can use the equation of motion to find the time it takes for the rock to reach its maximum height. At the highest point, the velocity of the rock is zero, so vi = 22 m/s, a = -9.8 m/s^2, and h = h₀ + 0. We can solve for the time t1:
[tex]h=v_{i}t_{1}+\frac{1}{2}at_{1} ^{2}[/tex]
[tex]0=22t_{1}-4.9t_{1}^{2}[/tex]
[tex]t_{1} = 4.49 seconds[/tex]
Next, we can use the same equation of motion to find the time it takes for the rock to reach a height of 9 meters on the way back down. This time, the initial height is h0 = 45 - (maximum height) = 45 - 22.45 = 22.55 meters, and the initial velocity is -vi = -22 m/s. We can solve for the time t2:
[tex]h=v_{i}t_{2}+\frac{1}{2}at_{2} ^{2}[/tex]
[tex]9 = 22t_{2} + 4.9*t_{2}^{2}[/tex]
[tex]t_{2} = 1.91 seconds[/tex]
The total time for the rock to reach a height of 9 meters on the way back down is t = [tex]t_{1}+t_{2}[/tex] = 6.40 seconds (rounded to two decimal places).
To know more about Meter visit:
brainly.com/question/22552981
#SPJ1
PLEASE HELP! (PRE CALC)
Jacy keeps track of the amount of average monthly rainfall in her hometown. She determines that the average monthly rainfall can be modeled by the function ...where ...represents the average monthly rainfall in centimeters and ... represents how many months have passed. If ... represents the average rainfall in July, in which months does Jacy’s hometown get at least 10.5 centimeters of rainfall? Show all of your algebraic reasoning to support your final answer.
Answer:
he months where Jacy's hometown gets at least 10.5 centimeters of rainfall are July (x = 7) and all the months after July, which are August (x = 8), September (x = 9), October (x = 10), November (x = 11), and December (x = 12).
Step-by-step explanation:
The given function is:
f(x) = 0.2x^2 - 1.8x + 6.5
where x represents the number of months passed and f(x) represents the average monthly rainfall in centimeters.
To find the months where the average rainfall is at least 10.5 centimeters, we need to set the function f(x) greater than or equal to 10.5 and solve for x:
0.2x^2 - 1.8x + 6.5 ≥ 10.5
0.2x^2 - 1.8x - 4 ≥ 0
Multiplying both sides by 5, we get:
x^2 - 9x - 20 ≥ 0
We can factor the left-hand side of the inequality as:
(x - 5)(x - 4) ≥ 0
The solution to this inequality is the set of values of x that make the inequality true. This includes the intervals where:
(x - 5) ≥ 0 and (x - 4) ≥ 0, which gives x ≥ 5
OR
(x - 5) ≤ 0 and (x - 4) ≤ 0, which gives x ≤ 4
Thus, the months where Jacy's hometown gets at least 10.5 centimeters of rainfall are July (x = 7) and all the months after July, which are August (x = 8), September (x = 9), October (x = 10), November (x = 11), and December (x = 12).
Jacy's hometown gets at least 10.5 centimeters of rainfall in the months of September, September of the following year, September of the year after that, and so on.
What is inequality?
An inequality is a relation between two numbers or expressions that are not equal.
It can show which of them is greater or smaller by using symbols like < or >. It can also be a statement of fact about the order relationship of quantities.
According to the question given,
We need to solve the inequality:
A(t) ≥ 10.5
Substituting the given function, we get:
2.3sin(π/6)t ≥ 10.5
sin(π/6)t ≥ 4.57.
Since the sine function has a maximum value of 1, the inequality is only satisfied when:
sin(π/6)t = 1
Solving for t, we get:
π/6t = π/2 + 2πk or π/6t = 3π/2 + 2πk
where k is any integer.
Simplifying each equation, we get:
t = 3 + 12k or t = 9 + 12k, where k is any integer.
Therefore, the only solution is given by:
t = 9 + 12k
where k is any integer.
Hence, Jacy's hometown gets at least 10.5 centimeters of rainfall in the months of September, September of the following year, September of the year after that, and so on.
Learn more about inequalities, click;
https://brainly.com/question/30231190
#SPJ2
The equation c=3m+5 represents a line of the best fit for a scarrr plot where c represents the total cost of a taxi in dollars and m represents the number of the trip
The slope is 3 which represents the cost per mile and the y-intercept is 5 which represents the fixed cost of the taxi.
What is a linear equation?A connection between a number of variables results in a linear model when a graph is displayed. The variable will have a degree of one.
The linear equation is given as,
y = mx + c
Where m is the slope of the line and c is the y-intercept of the line.
The equation is given below.
C = 3m + 5
Where 'C' represents the cost and 'm' represents the number of miles.
The slope is 3 which represents the cost per mile and the y-intercept is 5 which represents the fixed cost of the taxi.
More about the linear equation link is given below.
https://brainly.com/question/11897796
#SPJ9
The complete question is given below.
The equation c=3m+5 represents a line of the best fit for a scarer plot where c represents the total cost of a taxi in dollars and m represents the number of the trip. What do the numbers 5 and 3 represent?
A company wants to select no more than 2 projects from a set of 4 possible projects. Which of the following constraints ensures that no more than 2 will be selected?
A.X1 +X2 +X3 +X4 =1B.X1 +X2 +X3 +X4 ≤2C. X1 − X2 ≥ 0D. X1 − X2 − X3 ≤ 0
The correct constraint that ensures no more than 2 projects will be selected is: (B). X1 + X2 + X3 + X4 ≤ 2
This restriction specifies that the corporation can choose no more than two projects since the total of the choice factors X1, X2, X3, and X4 is less than or equal to 2. The other restrictions do not specifically place a cap on the number of chosen projects.
The corporation must choose exactly one project, but no more than two, in accordance with Constraint A, which says that the total of the decision variables must equal 1.Binary constraint C guarantees that X1 is more than or equal to X2, but it does not place a cap on the number of projects that can be chosen.
The three-way constraint D does not guarantee that the corporation chooses no more than two projects, but it does limit the sum of X1, X2, and X3 to be less than or equal to X4.
Therefore, the correct option is (B). X1 + X2 + X3 + X4 ≤ 2
For more such questions on constraints
https://brainly.com/question/15550794
#SPJ4
the corollary to the polygon angle-sum theorem finds the measure of each interior angle of a regular n-gon. *write a formula to find the measure of each interior angle using n
The Corollary to the polygon is explained below and the formula to find the measure of each interior angle is " (n - 2)×180°/n " .
The Corollary to the polygon Angle Sum Theorem states that : the sum of the interior angles of a regular n gon is written as :
that means , ⇒ Sum of interior angles = (n - 2) × 180° ...equation(1)
In a regular "n-gon" , all the interior angles are said to be congruent.
Let "x" be measure of each interior angle of a regular n-gon.
So , we can write ;
⇒ Sum of interior angles = (n)×(x) ;
Equating the above expressions with equation(1),
⇒ (n)×(x) = (n - 2) × 180° ;
On Solving for x,
⇒ x = (n - 2)×180°/n ;
Therefore, the measure of each interior angle of a regular "n-gon" is x = (n - 2)×180°/n .
Learn more about Angle Sum Theorem here
https://brainly.com/question/2995226
#SPJ4
Consider the accompanying data on flexural strength (MPa) for concrete beams of a certain type.
11.8 7.7 6.5 6.8 9.7 6.8 7.3
7.9 9.7 8.7 8.1 8.5 6.3 7.0
7.3 7.4 5.3 9.0 8.1 11.3 6.3
7.2 7.7 7.8 11.6 10.7 7.0
a) Calculate a point estimate of the mean value of strength for the conceptual population of all beams manufactured in this fashion. [Hint: ?xi = 219.5.] (Round your answer to three decimal places.)
MPa
State which estimator you used.
x
p?
s / x
s
x tilde
(b) Calculate a point estimate of the strength value that separates the weakest 50% of all such beams from the strongest 50%.
MPa
State which estimator you used.
s
x
p?
x tilde
s / x
(c) Calculate a point estimate of the population standard deviation ?. [Hint: ?xi2 = 1859.53.] (Round your answer to three decimal places.)
MPa
Interpret this point estimate.
This estimate describes the linearity of the data. This estimate describes the bias of the data. This estimate describes the spread of the data. This estimate describes the center of the data.
Which estimator did you use?
x tilde
x
s
s / x
p?
(d) Calculate a point estimate of the proportion of all such beams whose flexural strength exceeds 10 MPa. [Hint: Think of an observation as a "success" if it exceeds 10.] (Round your answer to three decimal places.)
(e) Calculate a point estimate of the population coefficient of variation ?/?. (Round your answer to four decimal places.)
State which estimator you used.
p?
x tilde
s
s / x
x
Mean value for the given data is 8.129, median = 7.7, Standard deviation is 1.699, Probability for MPa value greater than 10 is 0.148 and Coefficient of variation = 20.9
a) To estimate the mean value, we have to calculate all the observations and divide it by number of observations.
x = ∑ xi / n = 219.5/27 = 8.129
So here the estimator used is x
b) To estimate the strength value or to separate weakest 50% from strongest 50%, we have to calculate the median. For that we have to arrange in ascending order and find the middle most term.
Since n is odd, middle term is (n+1)/2 th term = (27+1)/2 = 28/2 = 14th term. Ascending order is given as image. the 14th term is 7.7.
c) Next we have to calculate standard deviation
σ = √(∑xi² - (∑x)²/n)/(n-1) = [1859.53 - (219.5²/27)] /(27-1)
= (1859.53- 1784.454) / 26
= 1.699
d) We have to calculate the probability flexural strength greater than 10. Here there are 4 values above 10.
So, p = 4/27 = 0.148
e) Coefficient of variation = (σ/x) ×100
= [tex]\frac{1.699}{8.129} * 100[/tex]
= 20.9
For more information regarding mean, median, standard deviation and coefficient of variation, kindly refer
https://brainly.com/question/13391221
#SPJ4
A 10.0-pound weight is lying on a sit-up bench at the gym. If the bench is inclined at an angle of 15°, there are three forces acting on the weight, as shown in the figure. N is called the normal force and it acts in the direction perpendicular to the bench. F is the force due to friction that holds the weight on the bench. If the weight does not move, then the sum of these three forces is 0. Find the magnitude of N and the magnitude of F. (Round each answer to one decimal place.)
On solving the provided question, we can say that the equation will be
[tex]N = Fg * cos(15°) = 44.6 N * cos(15°) = 42.8 N[/tex]
What is the equation?A mathematical equation is a formula that links two assertions and signifies equivalence with the equals sign (=). In, a mathematical statement that proves the equality of two mathematical expressions is referred to as an equation. The equal sign, for instance, separates the variables [tex]3x + 5[/tex] and 14 in the equation [tex]3x + 5 = 14.[/tex]There is a mathematical formula that explains the link between the two phrases that appear on either side of a letter. Frequently, the symbol and the single variable are the same. like [tex]2x - 4 = 2[/tex], for example.
Since the weight is not moving, the sum of the three forces acting on it must be zero. This means that the force of gravity acting on the weight is balanced by the normal force and the force due to friction.
The force of gravity on the weight is given by:
[tex]Fg = m * g[/tex]
where m is the mass of the weight (which we can find by dividing the weight in pounds by the acceleration due to gravity, g), and g is the acceleration due to gravity, which is approximately [tex]9.81 m/s^2.[/tex]
[tex]m = 10.0 pounds / (2.205 pounds/kilogram) = 4.54 kg[/tex]
[tex]Fg = 4.54 kg * 9.81 m/s^2 = 44.6 N[/tex]
The normal force N acts perpendicular to the bench, so it can be found using trigonometry. The angle between the bench and the horizontal is 15 degrees, so the angle between the normal force and the horizontal is also 15 degrees.
[tex]N = Fg * cos(15°) = 44.6 N * cos(15°) = 42.8 N[/tex](rounded to one decimal place)
The force due to friction F acts parallel to the bench, in the opposite direction to the component of the weight that is parallel to the bench. This component can be found using trigonometry:
[tex]Fp = Fg * sin(15°) = 44.6 N * sin(15°) = 12.2 N[/tex]
Since the weight is not moving, the force due to friction must be equal and opposite to this component:
[tex]F = -Fp = -12.2 N[/tex] (rounded to one decimal place)
So the magnitude of the normal force is 42.8 N and the magnitude of the force due to friction is 12.2 N.
To know more about equation visit:
brainly.com/question/649785
#SPJ1
If a tree grows from 4 inches to 5 feet 6 inches in ten years. On average, how much did the tree grew every year?
For this item, all answers should be entered as whole numbers.
Gustavo made a fruit smoothie. He put 11 ounces of bananas, 5 ounces of blueberries, 3 ounces of strawberries, and 4 ounces of oranges in the smoothie.
Use whole numbers to complete the following statements.
The ratio of ounces of bananas to ounces of strawberries is 11:
3
.
So, there are nearly
ounces of bananas for each ounce of strawberries.
The ratio of bananas to strawberries is 11:3.
What is ratio?A ratio is a comparison between two amounts that is calculated by dividing one amount by the other. The quotient a/b is referred to as the ratio between a and b if a and b are two values of the same kind and with the same units, such that b is not equal to 0. Ratios are represented by the colon symbol (:). As a result, the ratio a/b has no units and is represented by the notation a: b.
Given:
Number of bananas = 11 ounces,
Number of strawberries = 3 ounces
The ratio of bananas to strawberries
= 11/3
= 11:3.
learn more about Ratio here:
brainly.com/question/13419413
#SPJ9
Mai, Clare, and Tyler are hiking
from a parking lot to the summit
of a mountain. They pass a sign
that gives distances.
2
S
Parking lot: 3/4 mile
Summit: 1 and 1/2 miles
Mai says: "We are one third of the
way there." Clare says: "We have to
go twice as far as we have already
gone." Tyler says: "The total hike is
three times as long as what we
have already gone."
Who is correct?
Answer:
Tyler is Correct
Step-by-step explanation:
Total Hike = 2.25 (0.75 + 1.5)
2.25/0.75 = 3
Tyler is correct, since the total hike is 3 times as long as the distance travelled from the parking lot
suppose that two independent continuous random variables x and y have marginal densities fx(x) and fY(y) respectively. write down expressions that represent the following quantities, leaving definite integrals involving fx and fy as necessary:(a) P(3x−4<5)
(b) P(X>Y)(c) P(X+Y=5)
(d) E(cov(XY))
(e) Mx+y(t) (the mgf of X +Y)
(a) Expression for P(3x−4<5) is ∫[from -∞ to 3] fx(x) dx
(b) Expression for P(X>Y)(c) P(X+Y=5) is ∬[over (x,y) satisfying x > y] fx(x) fY(y) dxdy
(c) Expression for E(cov(XY)) is ∬xyfx(x) fY(y) dxdy - E(X)E(Y)
(d) Expression for Mx+y(t) (the mgf of X +Y) is Mx(t) My(t)
(a) P(3x-4<5) can be written as:
P(3x < 9)
P(x < 3)
The expression involving fx(x) for this probability would be:
∫[from -∞ to 3] fx(x) dx
(b) P(X>Y) can be written as:
P(X-Y > 0)
The expression involving fx(x) and fY(y) for this probability would be:
∬[over (x,y) satisfying x > y] fx(x) fY(y) dxdy
(c) P(X+Y=5) can be written as:
P(Y = 5 - X)
The expression involving fx(x) and fY(y) for this probability would be:
∬[over (x,y) satisfying x+y=5] fx(x) fY(y) dxdy
(d) The covariance of X and Y is defined as:
cov(X,Y) = E(XY) - E(X)E(Y)
So, E(cov(X,Y)) can be written as:
∬xyfx(x) fY(y) dxdy - E(X)E(Y)
(e) The MGF of X+Y can be written as:
Mx+y(t) = E(e^(t(X+Y)))
Since X and Y are independent, we can write this as:
Mx+y(t) = E(e^(tX) e^(tY))
Using the fact that X and Y have their own MGFs,
We can write this as:
Mx+y(t) = Mx(t) My(t)
Where Mx(t) and My(t) are the MGFs of X and Y, respectively.
For similar questions on definite integrals,
https://brainly.com/question/22008756
#SPJ4
Suppose two dice (one red, one green) are rolled. Consider the following events. A: the red die shows 2; B: the numbers add to 6; C: at least one of the numbers is 3; and D: the numbers do not add to 9. Express the given event in symbols. HINT [See Example 5.] The numbers do not add to 6.
B
D
D'
B'
B' ? D
How many elements does it contain?
The set B' ∩ D' represents the event "the numbers do not add to 6." It contains 20 elements.
The complement of event B is B' = {2, 3, 4, 5, 7, 8, 9, 10, 11, 12}. The complement of event D is D' = {2, 3, 4, 5, 6, 7, 8, 10, 11, 12}. Taking the intersection of their complements, we get B' ∩ D' = {2, 3, 4, 5, 7, 8, 10, 11}. This set represents the event "the numbers do not add to 6." It contains 8 elements out of the 36 possible outcomes of rolling two dice, so the probability of this event is 8/36 or 2/9.
Learn more about Dice here:
https://brainly.com/question/29713540
#SPJ4
jackson is conducting an experiment for his physics class. he attaches a weight to the bottom of a metal spring. he then pulls the weight down so that it is a distance of six inches from its equilibrium position. jackson then releases the weight and finds that it takes four seconds for the spring to complete one oscillation. Which function best models the position of the weight?a. s(t) = 6cos(2πt)b. s(t) = 6sin(π/2 t)c. s(t) = 6sin(2πt)d. s(t) = 6cos (π/2 t)
6 cos(π/2 t) is the best model for the position of the weight.
The motion of the weight on the spring can be modeled by a sine or cosine function because it oscillates back and forth around its equilibrium position.
We know that, the weight is initially pulled down 6 inches from its equilibrium position, so the function should have an amplitude of 6.
The time it takes for the spring to complete one oscillation is 4 seconds, so the period of the function is 4 seconds.
The general form of a sine or cosine function with amplitude A and period T is:
f(t) = A sin(2πt/T) or f(t)
= A cos(2πt/T)
Substituting the given values,
we get:
f(t) = 6 sin(2πt/4) or f(t)
= 6 cos(2πt/4)
Simplifying, we get:
f(t) = 6 sin(π/2 t) or f(t)
= 6 cos(π/2 t)
Therefore,
the function that best models the position of the weight is
s(t) = 6 cos(π/2 t).
So, the answer is option (D).
For similar questions on position of the weight,
https://brainly.com/question/26137753
#SPJ4
In these questions, assume that R is the reduced echelon form of the augmented matrix for a system of equations. 1.20 If the system has three unknowns and R has three nonzero rows, then the system has at least one solution. 1.21 If the system has three unknowns and R has three nonzero rows, then the system can have an infinite number of solutions. (1.22)The system below has an infinite number of solutions: 2x + 3y + 5z + 6 - 7 - 8v = 0 3x - 4y + 7z + + 8 + 5y = 0 -7x + 9y - 2z -- 4w - 5u + 2y = 0 --5x - 5y +92 +3w + 2u + 7y = 0 -9x + 3y - 9z+5w - 3u - 4y = 0
1.20 If the system has three unknowns and R has three nonzero rows, then the system has at least one solution.
This statement is true.
1.21 It is only when the rank of the coefficient matrix is less than the number of unknowns that the system can have infinitely many solutions
1.22 The system below has an infinite number of solutions:
2x + 3y + 5z + 6 - 7 - 8v = 0
3x - 4y + 7z + + 8 + 5y = 0
-7x + 9y - 2z -- 4w - 5u + 2y = 0
--5x - 5y +92 +3w + 2u + 7y = 0
-9x + 3y - 9z+5w - 3u - 4y = 0
This statement is true.
When we perform row reduction on a system of linear equations, the resulting reduced row echelon form (R) will have the same number of nonzero rows as the rank of the coefficient matrix.
In other words, if R has three nonzero rows, then the rank of the coefficient matrix is also 3.
If the rank of the coefficient matrix is equal to the number of unknowns, then the system has a unique solution.
However, if the rank of the coefficient matrix is less than the number of unknowns, then the system has either no solution or infinitely many solutions.
But in this case, since the rank is equal to the number of unknowns, the system must have at least one solution.
1.21 If the system has three unknowns and R has three nonzero rows, then the system can have an infinite number of solutions.
This statement is false. If R has three nonzero rows, then the rank of the coefficient matrix is also 3.
If the rank of the coefficient matrix is equal to the number of unknowns, then the system has a unique solution.
It is only when the rank of the coefficient matrix is less than the number of unknowns that the system can have infinitely many solutions.
1.22 The system below has an infinite number of solutions:
2x + 3y + 5z + 6 - 7 - 8v = 0
3x - 4y + 7z + 8 + 5y = 0
-7x + 9y - 2z - 4w - 5u + 2y = 0
-5x - 5y + 92 + 3w + 2u + 7y = 0
-9x + 3y - 9z + 5w - 3u - 4y = 0
This statement is true.
To check if the system has infinitely many solutions, we need to check the rank of the coefficient matrix and the rank of the augmented matrix. In this case, the rank of the coefficient matrix is 3, which is less than the number of unknowns (5).
Also, when we perform row reduction on the augmented matrix, we get the following reduced row echelon form:
1 0 -1 0 1 0
0 1 2 0 -1 0
0 0 0 1 2 0
0 0 0 0 0 1
0 0 0 0 0 0
Since the rank of the augmented matrix is less than the number of unknowns, the system has infinitely many solutions.
The variables with free parameters are z, u, and y, which can take any value.
The other variables can be expressed in terms of these free parameters.
For more questions on Linear Equation
https://brainly.com/question/25858757
#SPJ4
A design for a Do-Not-Disturb sign is made up of a rectangle with a circle cut out.
8 cm
2.2 cm
17 cm
Do Not Disturb Paper is used to make the sign. Which measurement is closest to the area of the paper surface of the Do-Not-Disturb sign once the circle has been cut out?
The measurement closest to the area of the paper surface of the Do-Not-Disturb sign once the circle has been cut out is 120.79 [tex]cm^2[/tex].
What is area of rectangle ?
In geometry, a rectangle is a four-sided flat shape with four right angles (90-degree angles) and opposite sides that are parallel and equal in length. The two pairs of opposite sides in a rectangle are congruent (i.e., have the same length), and the perimeter of a rectangle is the sum of the lengths of its four sides.
The area of a rectangle is a measure of the amount of space enclosed by the rectangle and is always expressed in square units. The formula for the area of a rectangle is A = length x width, where A is the area, length is the distance between the two longer sides of the rectangle (also called the length of the rectangle), and width is the distance between the two shorter sides (also called the width of the rectangle). The unit of measurement for the length and width of a rectangle must be the same for the area calculation to be correct.
The area of a rectangle is a useful measure when calculating the amount of material needed to cover a flat surface, such as the floor area of a room or the area of a piece of paper. It is also useful in solving geometry problems, such as finding the area of a composite shape made up of several rectangles or finding the dimensions of a rectangle given its area and one of its side lengths.
According to given information :
To find the area of the Do-Not-Disturb sign once the circle has been cut out, we need to subtract the area of the circle from the area of the rectangle.
The rectangle has dimensions of 17 cm by 8 cm, so its area is:
Area of rectangle = length x width = 17 cm x 8 cm = 136 [tex]cm^2[/tex]
The circle has a radius of 2.2 cm, so its area is:
Area of circle = π[tex]r^2[/tex] = π(2.2 cm)[tex]^2[/tex] ≈ 15.21 [tex]cm^2[/tex]
To find the area of the Do-Not-Disturb sign once the circle has been cut out, we need to subtract the area of the circle from the area of the rectangle:
Area of Do-Not-Disturb sign = Area of rectangle - Area of circle
= 136 [tex]cm^2[/tex] - 15.21 [tex]cm^2[/tex]
≈ 120.79 [tex]cm^2[/tex]
Therefore, the measurement closest to the area of the paper surface of the Do-Not-Disturb sign once the circle has been cut out is 120.79 [tex]cm^2[/tex].
To know more about area visit:
https://brainly.com/question/2607596
#SPJ1
"Mr. Franklin wants to buy an eraser for every fourth-grade student. There are 12 erasers in each box. There are 7 fourth-grade classes with 24 students in each class. How many boxes of erasers does Mr. Franklin need to buy?"
14 boxes of erasers should Mr. Franklin need to buy.
What is Division?A division is a process of splitting a specific amount into equal parts.
Given that Franklin wants to buy an eraser for every fourth-grade student
There are 12 erasers in each box.
There are 7 fourth-grade classes with 24 students in each class
The total number of students=7×24
=168
We need to find the number of boxes are required to buy an eraser for each student.
Since there are 12 erasers in each box, we can divide the total number of students by 12 to find the number of boxes Mr. Franklin needs to buy:
number of boxes = total students / erasers per box
number of boxes = 168 / 12
number of boxes = 14
Hence, 14 boxes of erasers should Mr. Franklin need to buy.
To learn more on Division click:
https://brainly.com/question/21416852
#SPJ9
need help with this asap
Answer: a
Step-by-step explanation:
Five quarts of a latex enamel paint will cover about 200 square feet of wall surface. How many quarts are needed to cover 165 square feet of kitchen wall and 115 square feet of bathroom wall?
Answer:
25
Step-by-step explanation: just like that
What is the area of the quadrilateral 10cn 16cm 22cm
The area of the quadrilateral is 140 m^2.
What is a quadrilateral?For closed figure made by 4 line segments joined end to end in series is called a quadrilateral.
A parallelogram in which adjacent sides are perpendicular to each other is called a rectangle.
A rectangle is always a parallelogram and a quadrilateral but reverse statement could be not be true.
Area of the quadrilateral = 2 x area of the traingle
Thus, Area of the triangle = 1/2 x base x height
Area of 1 triangle = 1/2 x 10 x 16
Area of 1 triangle = 80 m^2
Area of the quadrilateral = 2 x 80
Area of the quadrilateral = 140 m^2
Learn more about quadrilateral ;
https://brainly.com/question/28854514
#SPJ9
The complete question is;
What is the area of the quadrilateral if the dimensions of the quadrilateral are 10cm, 16cm and 22cm
look at this point A(3,-4),B(-5,1),C(0,-4),D(4,4),E(-2,0),F(-4,4)
Determine whether the statement about the points is correct
Answer:
Step-by-step explanation:
A proportioal relationship is formed when y = 4 and x =-16. What is the value of y when x equals 8?
Answer:
-2
Step-by-step explanation:
Standard equation of a proportional relationship:
y = kx
We use the given point to find k.
4 = k × (-16)
k = 4/(-16)
k = -1/4
The equation of this proportional relationship is
y = -1/4 x
Now we use x = 8 in the equation just above to find its corresponding y value.
x = 8
y = -1/4 × 8
y = -2
Answer: -2
suppose that grade point averages of undergraduate students at one university have a bell-shaped distribution with a mean of 2.56 and a standard deviation of 0.45 . using the empirical rule, what percentage of the students have grade point averages that are greater than 2.11 ? please do not round your answer.
16% percentage of the students have grade point averages that are greater than 2.11
Using the empirical rule, we know that for a bell-shaped distribution, approximately:
68% of the data falls within one standard deviation of the mean
95% of the data falls within two standard deviations of the mean
99.7% of the data falls within three standard deviations of the mean
To find the percentage of students with a grade point average greater than 2.11
We first need to calculate how many standard deviations away from the mean 2.11 is:
z = (2.11 - 2.56) / 0.45
= -1
This tells us that 2.11 is 1 standard deviation below the mean.
Since the distribution is symmetric.
The percentage of students with a GPA greater than 2.11 is the same as the percentage of students with a GPA less than 2.56 + 1*0.45, which is:
68% + 95% = 163%
So, approximately
100% - 163%
= 16% of the students have a GPA greater than 2.11.
For similar questions on empirical rule,
https://brainly.com/question/17175453
#SPJ4
Calculate the area of the triangle formed by the tangent to the graph of the function f(x) = (x-6)/(x-2) at the point x = 3 with the axes of the coordinate system.
Answer:
The area of the triangle formed by the tangent to the graph of the function f(x) = (x-6)/(x-2) at the point x = 3 with the axes of the coordinate system is 28.125 square units.
Step-by-step explanation:
Differentiation is an algebraic process that finds the gradient (slope) of a curve. At a point, the gradient of a curve is the same as the gradient of the tangent line to the curve at that point.
Given function:
[tex]f(x)=\dfrac{x-6}{x-2}[/tex]
Differentiate the given function using the quotient rule.
[tex]\boxed{\begin{minipage}{5.5 cm}\underline{Quotient Rule for Differentiation}\\\\If $y=\dfrac{u}{v}$ then:\\\\$\dfrac{\text{d}y}{\text{d}x}=\dfrac{v \dfrac{\text{d}u}{\text{d}x}-u\dfrac{\text{d}v}{\text{d}x}}{v^2}$\\\end{minipage}}[/tex]
[tex]\implies f'(x)=\dfrac{(x-2)\cdot 1-(x-6)\cdot 1}{(x-2)^2}[/tex]
[tex]\implies f'(x)=\dfrac{4}{(x-2)^2}[/tex]
To find the gradient of the tangent lines at x = 3, substitute x = 3 into the differentiated function:
[tex]\implies f'(3)=\dfrac{4}{(3-2)^2}=4[/tex]
Substitute x = 3 into the function to find the y-value of the point on the curve when x = 3:
[tex]\implies f(3)=\dfrac{3-6}{3-2}=-3[/tex]
The slope-intercept form of a linear equation is y = mx + b, where m is the gradient and b is the y-intercept.
Substitute the point (3, -3) and the found gradient m = 4 into the slope-intercept formula and solve for b:
[tex]\begin{aligned}y&=mx+b\\\implies-3&=4(3)+b\\-3&=12+b\\b&=-15\end{aligned}[/tex]
Therefore, the equation of the tangent to the curve at point x = 3 is:
[tex]y=4x-15[/tex]To calculate the point at which the tangent line intersects the x-axis, substitute y = 0 into the equation of the tangent:
[tex]\begin{aligned}\implies 0&=4x-15\\4x&=15\\x&=3.75\end{aligned}[/tex]
To calculate the point at which the tangent line intersects the y-axis, substitute x = 0 into the equation of the tangent:
[tex]\implies y=4(0)-15=-15[/tex]
Therefore, the tangent line intersects the x-axis at (3.75, 0) and the y-axis at (0, -15).
This means the triangle formed by the tangent and the axes of the coordinate system has a height of 15 units and a base of 3.75 units.
[tex]\begin{aligned}\textsf{Area of a triangle}&=\dfrac{1}{2}\sf \cdot base \cdot height\\\\\implies \sf Area&=\dfrac{1}{2} \cdot 3.75 \cdot 15\\\\&=\dfrac{225}{8}\\\\&=28.125\;\; \sf square\;units\end{aligned}[/tex]
Therefore, the area of the triangle is 28.125 square units.
Professor Cramer determines a final grade based on attendance, two papers, three major tests, and a final exam. Each of these activities has a total of 100 possible points. However, the activities carry different weights. Attendance is worth 3%, each paper is worth 5%, each test is worth 13%, and the final is worth 48%.(a) What is the average for a student with 99 on attendance, 75 on the first paper, 61 on the second paper, 94 on test 1, 86 on test 2, 77 on test 3, and 79 on the final exam? (Enter your answer to one decimal place.)(b) Compute the average for a student with the above scores on the papers, tests, and final exam, but with a score of only 21 on attendance. (Enter your answer to one decimal place.)
(a) Average for a student with 99 attendance is 81.1% and (b) The average for a student with 21 attendance is 78.8%.
Professor Cramer determines a final grade based on attendance, two papers, three major tests, and a final exam, the activities carry different weights.
Attendance is worth 3%,
each paper is worth 5%,
each test is worth 13%,
and the final is worth 48%.
(a) The average for a student with 99 on attendance, 75 on the first paper, 61 on the second paper, 94 on test 1, 86 on test 2, 77 on test 3, and 79 on the final exam
= [(99×3%) + (75×5%) + (61×5%) + (94×13%) + (86×13%) + (77×13%) + (79×48%)] ÷ [0.03 + 2(0.05) + 3(0.13) + 0.48]
= [2.97 + 3.75 + 3.05 + 12.22 + 11.18 + 10.01 + 37.92] ÷ 1
= 81.1 %
(b) The average for a student with the above scores on the papers, tests, and final exam, but with a score of only 21 on attendance
= [(21×3%) + (75×5%) + (61×5%) + (94×13%) + (86×13%) + (77×13%) + (79×48%)] ÷ [0.03 + 2(0.05) + 3(0.13) + 0.48]
= [0.63 + 3.75 + 3.05 + 12.22 + 11.18 + 10.01 + 37.92] ÷ 1
= 78.8 %
To know more about average
https://brainly.com/question/28654603
#SPJ4
Frederick is making hot chocolate from a mix. The graph models, the relationship between tablespoons of mixing cups of water
The constant of proportionality is 2. (True)
The equation n = 2m represents this relationship. (True)
Frederick needs 5 cups of water for 10 tablespoons of the mic. (False)
Point (2, 4) means 2 tablespoons of ms is needed for 4 cups of water. (False)
What is a slope?In mathematics, a line's slope, also known as its gradient, is a numerical representation of the line's steepness and direction
If a line passes through two points (x₁ ,y₁) and (x₂, y₂) ,
then the equation of a line is
y - y₁ = (y₂- y₁) / (x₂ - x₁) x (x - x₁)
To find the slope;
m = (y₂- y₁) / (x₂ - x₁)
Given:
Frederick is making hot chocolate from a mix.
The graph models, the relationship between tablespoons of mixing cups of water.
Let m be the variable that represents the number of cups of water and n is the number of tablespoons in the mix.
From the graph;
The line passes through (0, 0) and (1, 2),
So, the equation of the line is,
n - 0 = (0 - 2)/(0 - 1) m
n = 2m
Therefore, the constant of proportionality is 2.
To learn more about the slope;
brainly.com/question/3605446
#SPJ1
HELP ME WITH THIS ANSWER YALL- :Today, most people use an app to get directions. What do you think it would have been like to drive without an app? Besides converting distances, what other kinds of math concepts might you need to use?
Driving without an app would have been a much different experience. Instead of having turn-by-turn directions, one would need to rely on maps and other forms of navigation, such as written directions from friends or family, or using landmarks and street signs.
Besides converting distances, there are a number of other math concepts that one might need to use when driving without an app. For example, one might need to use basic arithmetic to calculate the estimated time of arrival based on average speed and distance. One might also need to use spatial reasoning to understand the layout of a city and the relative location of different streets and landmarks. Additionally, one might need to use problem-solving skills to make decisions about which route to take and how to handle unexpected road closures or detours.
I’ll give BRAINLIEST if correct need ASAP pls don’t bother looking it up none of them have this equation
An expression that represents the amount of canned food collected so far by the three friends is 15x^2 + 4xy - 1.
An expression that represents the number of cans the friends still need to collect to meet their goal is 9x^2 - 10xy - 1.
How to write the required expressions?From the information provided above, we can logically deduce the following number of canned food collection expressions for each friend:
Jessa; 9x^2
Theresa: 6x^2 - 4
Ben: 4xy + 3
Canned food collection goal: 24x^2 - 6xy - 2
Therefore, an expression that represents the total amount of canned food collected so far by the three friends can be calculated and written as follows;
Total amount collected = 9x^2 + 6x^2 - 4 + 4xy + 3
Total amount collected = 15x^2 + 4xy - 1
In order to meet the goal, they need to collect this amount:
Remaining canned foods = 24x^2 - 6xy - 2 - (15x^2 + 4xy - 1)
Remaining canned foods = 24x^2 - 6xy - 2 - 15x^2 - 4xy + 1
Remaining canned foods = 9x^2 - 10xy - 1.
Read more on expression here: brainly.com/question/25767785
#SPJ1
Use the given measurements to solve the triangle. Round lengths of sides lo the nearest tenth and angle measures to the nearest degree. a = 500,b = 300 The measure of angle B is approximately (Round to the nearest degree:)
The measure of angle B in given triangle is approximately 59°.
What do you mean by triangle?
Triangles are fundamental three-sided polygons having three internal angles. Due to the connection between the three vertices, it is one of the basic geometric shapes.
When combined, any two triangle sides will always be longer than the third side. A triangle's surface area is determined by the product of its base and height. The angles are created by connecting the triangle's three sides end to end at a single point. The sum of the triangle's three angles is 180 degrees.
The inverse tangent function, often known as tan1, can be used in this situation. Using the following equation:
tan(B) = adjacent/opposite
where the lengths of the triangle's opposite and adjacent sides, which together make up the desired angle B, are given. In this case, we know that side b is next to angle B and that side an is perpendicular to it.
We thus have:
tan(B) = a/b = 500/300 = 5/3
To find the value of angle B, we can take the inverse tangent of both sides of the equation, using table of trigonometric functions. We get:
B = tan⁻¹(5/3) ≈ 59°
Hence the correct answer is 59°
To learn more about triangle from the given link
https://brainly.com/question/17335144
#SPJ1
An exponential function f(x) passes through the points (2, 360) and (3, 216). Write an equation for f(x).
[tex]{\Large \begin{array}{llll} y=ab^x \end{array}} \\\\[-0.35em] ~\dotfill\\\\ \begin{cases} x=2\\ y=360 \end{cases}\implies 360=ab^2\implies 360=abb\implies \cfrac{360}{b}=ab \\\\[-0.35em] ~\dotfill\\\\ \begin{cases} x=3\\ y=216 \end{cases}\implies 216=ab^3\implies 216=abb^2\implies \stackrel{\textit{substituting from above}}{216=\left( \cfrac{360}{b} \right)b^2} \\\\\\ 216=360b\implies \cfrac{216}{360}=b\implies \boxed{\cfrac{3}{5}=b} \\\\[-0.35em] ~\dotfill[/tex]
[tex]\stackrel{\textit{since we know that}}{360=ab^2}\implies 360=a\left( \cfrac{3}{5} \right)^2\implies 360=\cfrac{9a}{25} \\\\\\ \cfrac{25}{9}\cdot 360=a\implies \boxed{1000=a}~\hfill {\Large \begin{array}{llll} y=1000\left( \frac{3}{5} \right)^x \end{array}}[/tex]