At each stage in its life cycle, a product receives Inputs of materials and energy, produces outputs of materials or energy that move to subsequent phases, and releases wastes into the environment. Properly place the following labels on the life cycle Inventory figure. - Manufacturing processing and formulation -Raw materials acquisition - Distribution and transportation -Use/reuse maintenance -Waste management -Recycling

Answers

Answer 1

The labels on the life cycle Inventory figure: - Raw materials acquisition. - Manufacturing processing and formulation.     - Distribution and transportation. - Use/reuse maintenance. - Waste management. - Recycling.

The labels on the life cycle Inventory figure:
1. Raw materials acquisition: This is the first stage in the life cycle. In this stage, the raw materials required for the product are gathered or extracted from natural resources.
2. Manufacturing processing and formulation: This is the second stage. Here, the acquired raw materials go through various processes and are combined, forming the final product.
3. Distribution and transportation: The third stage involves the movement of the manufactured products from the production facility to various distribution points, such as warehouses or retailers, before reaching the end consumer.
4. Use/reuse maintenance: This is the fourth stage of the life cycle, where the product is used by the consumer for its intended purpose. Proper maintenance and possible reuse of the product can extend its useful life, reducing its overall environmental impact.
5. Waste management: In the fifth stage, products that have reached the end of their useful life are disposed of through methods such as landfilling or incineration, depending on local regulations and waste management practices.
6. Recycling: The final stage of the life cycle involves recovering materials from end-of-life products and reintroducing them into the manufacturing process to create new products, reducing the need for additional raw materials acquisition.

Learn more about Waste management here: brainly.com/question/30051726

#SPJ11


Related Questions

the african rift valley, red sea, and atlantic ocean are in the correct order from earliest to most advanced steps of sea-floor spreading. true or fulse

Answers

True.

The African Rift Valley marks the beginning of a divergent boundary where the African Plate is splitting apart, causing magma to rise and create new crust. The Red Sea is a narrow strip of water that formed as the African Plate continued to pull away from the Arabian Plate. The Atlantic Ocean is a wider expanse of water that formed as the process of sea-floor spreading continued, pushing the African Plate and South American Plate further apart.

The theory of plate tectonics explains the movement of the Earth's lithosphere, which is made up of several large plates that fit together like puzzle pieces. These plates are constantly moving, either towards each other, away from each other, or sliding past each other along their boundaries. One type of plate boundary is a divergent boundary, where two plates are moving away from each other. This movement causes magma from the mantle to rise up and create new crust, which pushes the existing crust apart. Over time, this process can create a new ocean basin. The African Rift Valley is an example of a divergent boundary where the African Plate is splitting apart. This began around 30 million years ago and is still happening today. The valley is a large depression in the Earth's surface that stretches for thousands of kilometers from Syria in the north to Mozambique in the south. As the African Plate continues to move apart, magma rises up to fill the gap and new crust is created. The Red Sea is a narrow strip of water that formed as the African Plate continued to pull away from the Arabian Plate. This began around 20 million years ago and is still happening today. As the plates moved apart, the space between them was filled with seawater, creating a new ocean basin.

To know more about  sea-floor visit:

https://brainly.com/question/20949430

#SPJ11



How big the would most of the plants be in africa? Why?

Answers

The size of plants in Africa can vary significantly depending on various factors such as climate, soil conditions, and plant species.

Africa is a vast and diverse continent with a wide range of ecosystems and biomes, including savannas, rainforests, deserts, and grasslands. Each of these regions has unique environmental characteristics that influence the size and growth of plants.

In areas with abundant rainfall, such as tropical rainforests and wetlands, plants can grow to impressive sizes. The consistent moisture and high levels of sunlight in these regions provide optimal conditions for plant growth, allowing them to reach their maximum potential. Examples of large plants in African rainforests include towering trees, such as mahogany and ebony, which can grow to great heights and have expansive canopies.

In savannas and grasslands, where there is a distinct wet and dry season, plants have adapted to thrive in periodic drought conditions. Although the individual plants in these areas may not reach the same size as those in rainforests, they can cover vast areas and form dense vegetation.

Learn more about climate here:

https://brainly.com/question/32113386

#SPJ11

larghe amounts of long-stored organic material will bgin to decay and release carbon dixxiode when extneive areas of

Answers

When large amounts of long-stored organic material are present in extensive areas, it can lead to the release of carbon dioxide.

This is because organic material is composed of carbon-based compounds that break down over time due to natural processes such as decomposition. As the organic material decays, it releases carbon dioxide, which is a greenhouse gas that contributes to climate change.

The release of carbon dioxide from extensive areas of organic material can have a significant impact on the environment. For example, if this occurs in forests or wetlands, it can alter the natural balance of these ecosystems and cause significant damage to plant and animal species.

Additionally, the release of carbon dioxide can contribute to global warming and climate change, which can have far-reaching impacts on the planet.

To prevent the release of carbon dioxide from extensive areas of organic material, it is important to take steps to preserve and protect these areas.

This can include measures such as reducing deforestation, managing wetlands to prevent decay, and promoting sustainable agriculture practices that minimize the use of carbon-based fertilizers.

By taking these steps, we can help to mitigate the impact of carbon dioxide emissions and protect the environment for future generations.

For more question on organic visit:

https://brainly.com/question/12013411

#SPJ11

Large amounts of long-stored organic material will begin to decay and release carbon dioxide when extensive areas of land are disturbed or cleared, such as through deforestation or agricultural practices. This can contribute to increased levels of greenhouse gases in the atmosphere and negatively impact the environment.

It is important to manage land use practices in a sustainable manner to minimize the release of carbon dioxide and preserve natural ecosystems. The release of carbon dioxide from long-stored organic material when extensive areas are affected. When large amounts of long-stored organic material, such as plant debris and dead organisms, are exposed to external factors (like deforestation or land-use change), the decomposition process begins. During decomposition, microorganisms break down the organic material, releasing carbon dioxide (CO2) into the atmosphere. This process contributes to the overall carbon cycle and can have an impact on global climate change.

learn more about natural ecosystems here: brainly.com/question/10660429

#SPJ11

Other Questions
Elizabeth made taxable gifts of $3,450,000 in 2019 and $4,485,000 in 2020. She paid no gift tax on the 2019 transfer. On what amount is the Federal gift tax computed for the 2020 gift? $ What is the molarity of an hcl solution if 16. 0 mL of a 0. 5 M naoh are required to neutralize 25. 0 mL hcl a pair of ear plugs reduces the loudness of a noise from 106 db to 76 db. which is correct about the intensity? In a two slit experiment, the slit separation is 3.00x10^-5m. The interference pattern is created on a screen is 2m away from the slits. If the 7th bright fringe on the screen is a linear distance of 10cm away from the central fringe, what is the wavelength of the light? create a variable with internal linkage. name the variable y and give it the value 1.75. memory.cpp i #include 2 using namespace std; 3 void memory() 5} (7 points) assuming you have a valid max-heap with 7 elements such that a post-order traversaloutputs the sequence 1, 2, . . . , 6, 7. what is the sum of all nodes of height h = 1? For a normally consolidated clay specimen, the results of a drained triaxial test are as follows: Chamber-confining pressure=125kN/m2Deviator stress at failure=175kN/m2Determine the soil friction angle. calculate [ohoh] for a solution where [h3o ]=0.00667 m[h3o ]=0.00667 m.[OH-]= Calculate the Hrxn for the combustion of methane given the following information.2O2(g) + CH4(g) 2H2O(g) + CO2(g)Hf (CH4) = -1,348 kJ/molHf (H2O) = -388 kJ/molHf (CO2) = -690 kJ/mol Force F =13j^N is exerted on a particle at r =(3i^+5j^)m.What is the torque on the particle about the origin? The rotating magnetic field due to the rotor currents rotates relative to the stator core at a speed equal to Slip*rotor speed Rotor speed slip*synchronous speed O Synchronous speed Given a 5 stage pipeline with stages taking 1,2, 3, 1, 1 units of time, the clock period of the pipeline isa)8b)1/8c)1/3d)3 determine the standard matrix a for the linear tranformation which first roates points thorugh pi/4 clockwise and then reflects points through vertical x2 axis Use the Nernst equation to calculate the theoretical value of E of th copper-concentration cell and compare this value with th cell potential you measured.E = E* - 0.0592 / n * logQ**So I believe this is the equation that I would use. However, i'm don't know what E* is suppose to be...**The my electrochemistry experiment the cell potential that i measured were: 0.130V, 0.115V, and 0.110V (average cell potential = 0.118V)The concentration of the copper concentration cells used for this lab were: 0.05M CuSO4 and 1.0M CuSO4standard reduction potential (in text) = Cu2+ + 2e- --> Cu(s) E* = +0.34V **I believe I use the 2 here for n in the Nernst equation. **am i doing this right? ---> E= 0.118v - 0.0592V / 2e- * log (1.0M/0.05M) =0.0795V ??? Write a program that uses 5 threads. initialize a shared variable with a value of 100. If a store has annual demand (365 days per year) of 6,000 units and the lead time for it to receivean order from its supplier is 20 days, its EOQ reorder point is approximatelya. 300 unitsb. 329 unitsc. 428 unitsd. 600 units ralph and his wife are hoping to purchase their new home. their lender is running their credit scores. how are ralph and his wifes credit scores determined? T target practice, Scott holds his bow and pulls the arrow back a distance of :::. 0. 30 m by exerting an average force of 40. 0 N. What is the potential energy stored in the bow the moment before the arrow is released You purchase one MBI March 200 put contract for a put premium of $11. The maximum profit that you could gain from this strategy isMultiple Choice$200$1100$18.900$20,000 A stone is tossed into the air from ground level with an initial velocity of 39 m/s. Its height at time t is h(t) = 39t 4.9t^2 m/s. Compute the stone's average velocity over the time intervals [1, 1.01], [1, 1.001], [1, 1.0001], and [0.99, 1], [0.999, 1], [0.9999, 1].Estimate the instantaneous velocity v at t = 1.