Austin is on a fishing trip. At first he rides his boat 15 km east. He doesn’t catch anything, so he turns the boat around and rides 5 km west to find a better spot. A. His distance traveled is. B. His displacement is

Answers

Answer 1

A. The distance traveled by Austin is the total length of the path he covered. In this case, he rode 15 km east and then 5 km west. The total distance traveled is the sum of these distances:

Distance traveled = 15 km + 5 km = 20 km

Therefore, Austin traveled a total distance of 20 kilometers.

B. The displacement of Austin is the straight-line distance from the starting point to the ending point, regardless of the path taken. Displacement takes into account both the distance and the direction. In this case, Austin initially traveled 15 km east and then 5 km west. The displacement is the difference between these two distances, considering the direction:

Displacement = 15 km east - 5 km west = 10 km east

Therefore, the displacement of Austin is 10 kilometers east.

 To  learn  more  about distance click here:brainly.com/question/13034462

#SPJ11


Related Questions

How many moles of H+ ions are needed to neutralize 3M of 0. 5 L of NaOH?


what’s the answer?

Answers

To determine the number of moles of H+ ions needed to neutralize 0.5 L of a 3M NaOH solution, we can use the balanced chemical equation for the neutralization reaction between NaOH and H+ ions:

NaOH + H+ → Na+ + H2O

From the equation, we can see that one mole of NaOH reacts with one mole of H+ ions.

Given that the NaOH solution has a concentration of 3M and a volume of 0.5 L, we can calculate the number of moles of NaOH:

Moles of NaOH = Concentration × Volume = 3 mol/L × 0.5 L = 1.5 moles

Since the reaction is 1:1, we can conclude that 1.5 moles of H+ ions are required to neutralize the given amount of NaOH.

 To  learn  more  about moles click here:brainly.com/question/30885025

#SPJ11

Trace amounts of oxygen gas can be "scrubbed" from gases using the following reaction: 4 Cr2+(aq) + O2(g) + 4 H+(aq)-4 Cr3+(aq) + 2 H2O(l) Which of the following statements is true regarding this reaction? A. O2 (g) is reduced B. Cr2+(aq) is the oxidizing agent. C. O2(g) is the reducing agent. D. Electrons are transferred from 02 to Cr2-

Answers

In the reaction 4 Cr²⁺(aq) + O₂(g) + 4 H⁺(aq) → 4 Cr³⁺(aq) + 2 H₂O(l), trace amounts of oxygen gas are removed from the mixture. This reaction involves redox processes, where oxidation and reduction occur simultaneously. The correct options are A and B.

A. O₂ (g) is reduced: This statement is true. In the reaction, the oxygen gas (O₂) gains electrons, changing its oxidation state from 0 to -2 (in H₂O). Gaining electrons is the process of reduction.

B. Cr²⁺(aq) is the oxidizing agent: This statement is also true. The oxidizing agent is the substance that causes the reduction of another species. In this case, Cr²⁺ causes the reduction of O₂ by accepting electrons and undergoing a change in its oxidation state from +2 to +3.

C. O₂(g) is the reducing agent: This statement is false. The reducing agent is the substance that causes the oxidation of another species. In this reaction, O₂ is reduced, not the reducing agent. The reducing agent is Cr²⁺, as it loses electrons and causes the oxidation of other species.

D. Electrons are transferred from O₂ to Cr²⁺: This statement is false. Electrons are transferred from Cr²⁺ to O₂. Cr²⁺ loses electrons and gets oxidized to Cr³⁺, while O₂ gains electrons and gets reduced to form H₂O.

To know more about redox processes, refer to the link below:

https://brainly.com/question/31959470#

#SPJ11

Why should the temperature extremes a weld will be seeing in service be important to the selection of a filler metal for a weld?

Answers

The temperature extremes that a weld will be exposed to in service are important in selecting a filler metal for the weld because the properties of the filler metal can be affected by temperature changes.

When a weld is subjected to high temperatures, it can undergo thermal expansion and contraction, which can lead to cracking, distortion, and other forms of deformation.

Filler metals are designed to withstand these temperature changes without losing their strength or other desirable properties.

Different filler metals have different temperature ranges at which they can maintain their properties.

For example, some filler metals are designed to withstand high temperatures and can be used for welding applications that involve exposure to extreme heat.

Other filler metals are better suited for lower-temperature applications and may become brittle or lose their strength if exposed to high temperatures.

Therefore, understanding the temperature extremes that a weld will experience in service is crucial in selecting a filler metal with appropriate properties to withstand those conditions and maintain the weld's integrity over time.

To know more about refer temperature extremes here

brainly.com/question/29769337#

#SPJ11

A 2000W carbon dioxide laser emits an infrared laser beam with a wavelength of 10.6?m. How many photons are emitted per second?
N=___ photon per second
Quantum number of the hydrogen atom comes closest to giving a 500-nm-diameter electron orbit is N=69
What is the electron's speed in this state?

Answers

To calculate the number of photons emitted per second, we can use the formula:
N = (P/E) x (1/hv)
where N is the number of photons emitted per second, P is the power of the laser (2000W in this case), E is the energy per photon (which can be calculated using E = hc/λ, where h is Planck's constant, c is the speed of light, and λ is the wavelength of the laser beam), and v is the frequency of the laser beam (which can be calculated using v = c/λ).

Plugging in the values, we get:
E = (6.626 x 10^-34 J s x 3 x 10^8 m/s) / (10.6 x 10^-6 m) = 1.86 x 10^-19 J
v = 3 x 10^8 m/s / 10.6 x 10^-6 m = 2.83 x 10^13 Hz
N = (2000W / 1.86 x 10^-19 J) x (1 / (6.626 x 10^-34 J s x 2.83 x 10^13 Hz)) = 2.03 x 10^19 photons/s
Therefore, the number of photons emitted per second is 2.03 x 10^19.
To calculate the electron's speed, we can use the formula:
v = (Z/n) x (h/2π) x (1/(me x α))
where Z is the atomic number of hydrogen (1), n is the quantum number (69 in this case), h is Planck's constant, π is a mathematical constant (pi), me is the mass of an electron, and α is the fine-structure constant.
Plugging in the values, we get:
v = (1/69) x (6.626 x 10^-34 J s / (2π)) x (1 / (9.109 x 10^-31 kg x 0.0072973525664)) = 2.18 x 10^6 m/s
Therefore, the electron's speed in this state is 2.18 x 10^6 m/s.

To know more about photons visit:

https://brainly.com/question/29409292

#SPJ11

How does phenyl isothiocyanatc. Ph-N=C=S. react with a peptide in the Edman degradation? the sp carbon acts as an electrophile in a reaction with an amino group of the peptide the sulfur acts as a nucleophile and adds to the carbon of the peptide bond the nitrogen acts as a nucleophile and adds to the carbon of the peptide bond the sp carbon acts as an electrophile in a reaction with a carbo.xylote of the peptide

Answers

The reaction occurs through the sp carbon of the isothiocyanate group, which acts as an electrophile and attacks the lone pair of electrons on the nitrogen of the amino group.

The sp carbon of phenyl isothiocyanate acts as an electrophile in a reaction with an amino group of the peptide, forming a phenylthiocarbamoyl derivative. The sulfur of the isothiocyanate group then acts as a nucleophile and adds to the carbon of the peptide bond, resulting in the cleavage of the peptide bond between the amino acid residue and the N-terminal amino group.

The Edman degradation is a step-by-step process used to determine the amino acid sequence of a peptide. Phenyl isothiocyanate (Ph-N=C=S) plays a crucial role in this process. When it reacts with the peptide, the electrophilic sp carbon of phenyl isothiocyanate interacts with the nucleophilic amino group of the N-terminal amino acid residue of the peptide. This reaction forms a cyclic intermediate, which, upon further treatment, releases the N-terminal amino acid as a phenylthiohydantoin derivative.

To know more about  isothiocyanate  visit :

https://brainly.com/question/28585537

#SPJ11

a radioactive sample with a half-life of 1.5 s initially has 10,000,000 nuclei. what would be the activity, or decay rate, in bq after 12.0 seconds?

Answers

The activity of a radioactive sample is given by:

A = λN

where A is the activity (decay rate) in Becquerel (Bq), λ is the decay constant in s^-1, and N is the number of radioactive nuclei.

The decay constant is related to the half-life by:

λ = ln(2) / t1/2

where t1/2 is the half-life.

Using the given half-life of 1.5 s, we can find the decay constant:

λ = ln(2) / 1.5 s

λ = 0.4621 s^-1

At t = 0 seconds, the number of radioactive nuclei is N = 10,000,000. After 12.0 seconds, the number of radioactive nuclei remaining is:

N = N0 * e^(-λt)

N = 10,000,000 * e^(-0.4621 * 12.0)

N = 1,355,750

The activity at this time is:

A = λN

A = 0.4621 s^-1 * 1,355,750

A = 626,822 Bq

Therefore, the activity (decay rate) of the sample after 12.0 seconds is 626,822 Bq.

To know more about radioactive refer here

https://brainly.com/question/1770619#

#SPJ11

you have been given vials of h 2, na, h 2o, hg,and ch 4. what are the majority of your vials filled with?

Answers

The majority of the vials are filled with H2O, which stands for water. Water is a colorless, odorless, and tasteless liquid that is essential for life on Earth.

It is made up of two hydrogen atoms and one oxygen atom, which is why its chemical formula is H2O. Water is commonly found in various forms such as oceans, lakes, rivers, and even in the atmosphere as clouds. It is a universal solvent, which means that it can dissolve many different types of substances, including salts, sugars, acids, and gases. This property makes it a vital component for many industrial and biological processes. The other vials contain hydrogen gas (H2), sodium (Na), mercury (Hg), and methane gas (CH4). Hydrogen gas is the lightest and most abundant element in the universe, while sodium is a soft, silvery-white metal that is highly reactive with water. Mercury is a dense, silvery-white liquid that is commonly used in thermometers, and methane gas is a colorless, odorless gas that is a primary component of natural gas.

learn more about Water

https://brainly.com/question/30287955

#SPJ11

Which layer of earth's atmosphere contains no water vapor, has an atmospheric pressure less than 10 ^-4 atmosphere, and has an air temperature that increases with altitude?

Answers

The layer of Earth's atmosphere that meets the given criteria is the thermosphere, which contains negligible water vapour, has extremely low atmospheric pressure, and experiences an increase in air temperature with altitude.

The thermosphere is the uppermost layer of Earth's atmosphere, located above the mesosphere and extending into space. It is characterized by its extremely low density and pressure, with the atmospheric pressure dropping to less than [tex]10^-^4[/tex] atmosphere.

In this region, the air molecules are widely spaced, resulting in negligible water vapour content. Additionally, the thermosphere experiences an increase in air temperature with altitude due to the absorption of intense solar radiation.

This layer is known for its high temperatures, reaching thousands of degrees Celsius, but it would not be felt as heat due to the extremely low density of the air. The thermosphere plays a crucial role in phenomena such as auroras and the propagation of radio waves.

Learn more about atmospheric pressure here:

https://brainly.com/question/28310375

#SPJ11

the electron-domain geometry and molecular geometry of boron trifluoride are __________ and __________, respectively.

Answers

The electron-domain geometry of boron trifluoride is trigonal planar, while its molecular geometry is also trigonal planar.   This means that the boron atom is located at the center of a flat, triangular plane, with each of the three fluorine atoms located at the corners of the same plane.

The reason for this geometry is due to the fact that boron has only three valence electrons, while each fluorine atom has seven.

This results in the boron atom sharing its valence electrons with each of the fluorine atoms, resulting in three shared pairs of electrons and three electron domains surrounding the boron atom.

The molecular geometry of boron trifluoride is the same as its electron-domain geometry, as there are no lone pairs of electrons around the central boron atom to affect the molecule's shape.

Overall, the unique electronic and structural properties of boron trifluoride make it an important compound in a variety of chemical reactions and industrial processes .

Know more about molecular geometry here:

brainly.com/question/30185738

#SPJ11

12.22 draw the reaction with potassium permanganete

Answers

The reaction with potassium permanganate are : [tex]HCH_2CH_3 CH_2O + KMnO_4 + H_2O = CH_3COOH + HCOOH + KOH + MnO_2[/tex]

b. [tex]CH_3CH_2 H + KMnO_4 + H_2O = CH_3COOH + H_2O + KOH + MnO_2[/tex]

Potassium permanganate (KMnO4) is a strong oxidizing agent commonly used in organic chemistry to oxidize primary and secondary alcohols to aldehydes and ketones, respectively.

a. When [tex]H-CH_2CH_3-CH_2OH[/tex] (1-propanol) is treated with [tex]KMnO_4[/tex], it undergoes oxidation to form propanal ([tex]CH_3CH_2CHO[/tex]) and then to propionic acid [tex](CH_3CH_2COOH)[/tex]:

[tex]H-CH_2CH_3-CH2OH + [O] = CH_3CH_2CHO + H_2O[/tex]

[tex]CH_3CH_2CHO + 2[O] = CH3CH_2COOH[/tex]

b. When [tex]CH_3CH_2-H[/tex] (ethane) is treated with [tex]KMnO_4[/tex], it undergoes no reaction as it does not contain any functional groups that can be oxidized by [tex]KMnO_4[/tex]. Therefore, the compound remains unchanged.

For more question on potassium permanganate click on

https://brainly.com/question/29555671

#SPJ11

CORRECT QUESTION.

NAME THE PRODUCT WHEN react WITH the compounds with potassium permanganate. a.  H CH2CH3 CH2O b. CH3CH2 H

The balanced chemical equation for the reaction between potassium permanganate and another substance:

2 KMnO4 + 3 H2SO4 + 5 H2C2O4 → K2SO4 + 2 MnSO4 + 8 H2O + 10 CO2

In this reaction, potassium permanganate (KMnO4) reacts with oxalic acid (H2C2O4) in the presence of sulfuric acid (H2SO4) to form potassium sulfate (K2SO4), manganese sulfate (MnSO4), water (H2O), and carbon dioxide (CO2).

Learn more about  potassium permanganate click here:

https://brainly.com/question/29480689

#SPJ11

if you add enzyme to a solution containing only the product(s) of a reaction, would you expect any substrate to form? a) it depends on the time interval and temperature of reaction. b) it depends on the concentration of products added. c) it depends on the energy difference between e p and the transition state. d) all of the above may determine if product forms. e) none of the above determines if product forms.

Answers

If you add enzyme to a solution containing only the product(s) of a reaction, it may or may not lead to the formation of substrate. This is because the answer to this question depends on several factors such as the time interval and temperature of reaction, concentration of products added, and the energy difference between e p and the transition state.

The time interval and temperature of the reaction can affect the activity of the enzyme, and hence the likelihood of substrate formation. Similarly, the concentration of products added can influence the enzyme activity, and thereby the possibility of substrate formation. Finally, the energy difference between e p and the transition state can determine the thermodynamic feasibility of the reaction. Therefore, it is safe to say that all of the above factors may determine if product forms, and none of the above is the definitive answer.

To know more about Reaction visit :

https://brainly.com/question/30464598

#SPJ11

Question A solution contains 0.0125 M of some compound. The absorbance through a path length of 1.00 cm is 0.364. A second compound with an extinction coefficient of 15.2 cm-M is added to the solution, and the absorbance through the path length of 1.00 cm increases to 0.455. What is the concentration of the second compound in the solution? Give the answer to three significant figures Provide your answer below:

Answers

The concentration of the second compound in the solution is approximately 0.00599 M or 5.99 x 10⁻³ M. To determine the concentration of the second compound, we can use the Beer-Lambert Law, which states: A = εcl ,  

Where A is absorbance, ε is the molar absorptivity (extinction coefficient), c is the concentration, and l is the path length.

For the first compound, we are given:
A₁ = 0.364
c₁ = 0.0125 M
l₁ = 1.00 cm

For the second compound, we are given:
ε₂ = 15.2 cm⁻¹M⁻¹
l₂ = 1.00 cm
A₂_total = 0.455 (absorbance after adding the second compound)

Since the absorbances are additive, we can write the equation for the total absorbance:

A₂_total = A₁ + A₂

Substituting the given values, we get:

0.455 = 0.364 + (15.2)(c₂)(1)

Now, we can solve for the concentration of the second compound (c₂):

c₂ = (0.455 - 0.364) / 15.2
c₂ = 0.091 / 15.2
c₂ ≈ 0.00599 M

The concentration of the second compound in the solution is approximately 0.00599 M or 5.99 x 10⁻³ M, to three significant figures.

For more such questions on concentration

https://brainly.com/question/28564792

#SPJ11

The concentration of the second compound in the solution is 0.0553 M.

To solve this problem, we can use the Beer-Lambert Law, which states that absorbance is proportional to the concentration of the absorbing species and the path length. The change in absorbance can be used to determine the concentration of the second compound.

First, we can calculate the initial absorbance of the solution using the given concentration and extinction coefficient:

A = εcl = (0.0125 M) x (15.2 cm-M) x (1.00 cm) = 0.190

Next, we can calculate the absorbance contributed by the second compound:

ΔA = A₂ - A = 0.455 - 0.364 = 0.091

We can then use the Beer-Lambert Law again to solve for the concentration of the second compound:

ΔA = ε₂cl = (15.2 cm-M) x (c₂) x (1.00 cm)

c₂ = ΔA / (ε₂l) = 0.091 / (15.2 cm-M x 1.00 cm) = 0.005993 M

Adding this to the initial concentration gives us the total concentration of the second compound in the solution:

c_total = c₁ + c₂ = 0.0125 M + 0.005993 M = 0.0185 M

However, the question asks for the concentration of the second compound alone, so we need to subtract the initial concentration to get the final answer:

c₂ = c_total - c₁ = 0.0185 M - 0.0125 M = 0.006 M or 0.0553 M (to three significant figures).

learn more about compound here:

https://brainly.com/question/13516179

#SPJ11

For the reaction
2NH3(g) + 2O2(g)Arrow.gifN2O(g) + 3H2O(l)
delta16-1.GIFH° = -683.1 kJ anddelta16-1.GIFS° = -365.6 J/K
The standard free energy change for the reaction of 1.57 moles of NH3(g) at 302 K, 1 atm would be kJ.
This reaction is (reactant, product) favored under standard conditions at 302 K.
Assume thatdelta16-1.GIFH° anddelta16-1.GIFS° are independent of temperature.
For the reaction
CO(g) + Cl2(g)Arrow.gifCOCl2(g)
delta16-1.GIFG° = -69.6 kJ anddelta16-1.GIFS° = -137.3 J/K at 282 K and 1 atm.
This reaction is (reactant, product) favored under standard conditions at 282 K.
The standard enthalpy change for the reaction of 1.83 moles of CO(g) at this temperature would be kJ.

Answers

Standard free energy change for the reaction of 1.57 moles of NH3(g) at 302 K, 1 atm = -178.6 kJ

The reaction is product-favored under standard conditions at 302 K.

Standard enthalpy change for the reaction of 1.83 moles of CO(g) at 282 K = -127.3 kJ.

For the first reaction, 2[tex]NH_3[/tex](g) + 2[tex]O_2[/tex](g) → [tex]N_2O[/tex](g) + 3[tex]H_2O[/tex](l)

the standard free energy change can be calculated using the equation ΔG° = ΔH° - TΔS°, where ΔH° and ΔS° are the standard enthalpy and entropy changes, respectively.

Substituting the given values, we get
ΔG° = -683.1 kJ - (302 K)(-0.3656 kJ/K/mol)(2 mol) = -178.6 kJ.

Since the value is negative, the reaction is product-favored under standard conditions at 302 K.

For the second reaction, CO(g) + [tex]Cl_2[/tex](g) →[tex]COCl_2[/tex](g)

since the given value of ΔG° is negative, the reaction is product-favored under standard conditions at 282 K.

The standard enthalpy change can be calculated using the equation
ΔG° = ΔH° - TΔS°.

Solving for ΔH° and substituting the given values, we get,
ΔH° = ΔG° + TΔS° = -69.6 kJ + (282 K)(-0.1373 kJ/K/mol)(2 mol) = -127.3 kJ.

To know more about "Enthalpy" refer here:

https://brainly.com/question/14862048#

#SPJ11

Explain why [H, 0] is not included in the calculation of the K of the borax (see Equation 5 page 138). 2. A 9.00 mL aliquot of a borax-borate equilibrium solution reacts complete- ly with 29.10 mL of a 0.100 M HCl solution. Calculate the K, of the borax. 3. From the parameters of the best-fit line, determine AH and AS. Be sure to report the correct units for these quantities. What does the fit, R2, tell you about your graph and the values of AH and AS determined? к- [NEBOCH,1 (5)

Answers

The reason why [H, 0] is not included in the calculation of the K of borax is that it is not a significant contributor to the overall equilibrium of the system.

Borax, or sodium borate, reacts with HCl to form a complex ion, so the equilibrium equation only involves the concentrations of borax and the complex ion.

To calculate the K of the borax, we can use the equation;

K = [complex ion]/[borax]

Here, first, the determination of the concentration of the complex ion is required which is done by using the volume and concentration of the HCl solution that reacts with the borax-borate equilibrium solution.

Later, the equation n = C x V is used to determine the amount of HCl that reacts, then use stoichiometry to determine the amount of complex ion that is formed.

The moles of HCl reacted: (29.10 mL)(0.100 M) = 2.910 mmol.

Since there's a 1:1 ratio between HCl and borate, 2.910 mmol of borate reacted.

Thus, the initial concentration of borate is (2.910 mmol)/(9.00 mL) = 0.323 M.

To determine ΔH and ΔS, plot the graph of ln(K) vs 1/T and find the slope and y-intercept of the line of best fit.

Here, the slope is equal to -ΔH/R and the y-intercept is equal to ΔS/R, where R is the gas constant.

The units for ΔH are J/mol and the units for ΔS are J/(mol*K).

The value of R² tells us how well the data points fit the line of best fit.

A value of 1 means that all data points lie on the line, while a value of 0 means that none fit the line.

The closer R² is to 1, the more confident one can be in the values of ΔH and ΔS that are determined.

To know more about borax-borate concentration, click below.

https://brainly.com/question/21133994

#SPJ11

consider the following reaction: 2 pbs (s) 3 o2 (g) → 2 pbo (s) 2 so2 (g) δhrxn = -827.4 kj what mass of pbs has reacted if 765 kj of heat is produced?

Answers

The answer is 27.8 grams of PbS must have reacted to produce 765 kJ of heat. The first step in solving this problem is to use the given enthalpy change and the stoichiometry of the reaction to determine the amount of heat produced when one mole of PbS reacts.

We can do this by using the following formula: ΔH_rxn/mol = ΔH_rxn/2 mol PbS = -827.4 kJ/mol / 2 mol PbS. ΔH_rxn/mol = -413.7 kJ/mol PbS. This means that for every mole of PbS that reacts, 413.7 kJ of heat is produced. Next, we can use the amount of heat produced in the reaction (765 kJ) to calculate the amount of PbS that must have reacted. We can set up a proportion:

765 kJ / 413.7 kJ/mol = x mol PbS / molar mass of PbS

We can solve for x (the number of moles of PbS that reacted) by rearranging the equation:

x mol PbS = (765 kJ / 413.7 kJ/mol) * (1 / molar mass of PbS)

Using the molar mass of PbS (239.3 g/mol), we can calculate the number of moles of PbS that reacted:

x mol PbS = (765 kJ / 413.7 kJ/mol) * (1 / 239.3 g/mol) = 0.116 mol PbS

Finally, we can convert the number of moles of PbS to mass using its molar mass:

mass of PbS = 0.116 mol PbS * 239.3 g/mol = 27.8 g PbS

Therefore, 27.8 grams of PbS must have reacted to produce 765 kJ of heat.

For more questions like heat visit the link below:

https://brainly.com/question/31070620

#SPJ11

53. 9 g of iron oxide is formed during an experiment where 42. 3g of iron oxidizes.


Fe + O2= Fe2O3


A: which reactant is limiting?



B: what is the theoretical yield (mass) of iron (III) oxide produced in this reaction?

Answers

To determine which reactant is limiting in the reaction and the theoretical yield of iron(III) oxide, we need to compare the moles of each reactant.

First, let's calculate the number of moles of iron and oxygen in the reaction using their respective masses and molar masses:

Molar mass of Fe = 55.85 g/mol

Molar mass of O2 = 32.00 g/mol

Moles of iron (Fe) = mass of iron / molar mass of Fe

Moles of iron (Fe) = 42.3 g / 55.85 g/mol

Moles of iron (Fe) = 0.758 mol

Moles of oxygen (O2) = mass of oxygen / molar mass of O2

Moles of oxygen (O2) = 53.9 g / 32.00 g/mol

Moles of oxygen (O2) = 1.684 mol

Next, we need to determine the stoichiometric ratio between iron and iron(III) oxide in the balanced equation 4 Fe + 3 O2 → 2 Fe2O3

From the balanced equation, we can see that the stoichiometric ratio between iron and iron(III) oxide is 4:2, or simply 2:1.

Now, to determine the theoretical yield of iron(III) oxide, we use the stoichiometry of the balanced equation. From the equation, we see that 4 moles of iron react to form 2 moles of iron(III) oxide.

The moles of iron(III) oxide can be calculated as follows:

Moles of iron(III) oxide = 0.758 mol (moles of iron) × (2 mol Fe2O3 / 4 mol Fe)

Moles of iron(III) oxide = 0.379 mol.

Learn more about theoretical yield of iron here

https://brainly.com/question/14464304

#SPJ11

which of these compounds would exist primarily in an enol form? a. b. c. d. e.

Answers

Based on the given question, the compound that would exist primarily in an enol form is compound b.

Which compound is predominantly present in the enol form?

Compound b is likely to exist primarily in an enol form. Enols are tautomers of carbonyl compounds and contain both an alkene (-C=C-) and an alcohol (-OH) functional group. In the enol form, the carbon-oxygen double bond of the carbonyl group is converted into a carbon-carbon double bond, resulting in the formation of an enol. The keto-enol tautomerism is a dynamic equilibrium, with the enol form being less stable compared to the keto form.

Enol formation occurs when the acidic proton on the α-carbon adjacent to the carbonyl group is abstracted by a base, resulting in the formation of the enolate anion. This anion then undergoes protonation to yield the enol tautomer. The keto form is typically more stable due to the resonance stabilization of the carbonyl group, but certain factors such as electronic effects and solvent conditions can favor the enol form. Compound b likely possesses the necessary structural and electronic features to stabilize the enol tautomer, making it the primary form present.

Learn more about Compound

brainly.com/question/14117795

#SPJ11

Calculate the equilibirum concentration oF H3O in a 0. 20 M M

Answers

The equilibrium concentration of H_{3}O^{+} in a 0.20 M solution of a weak acid depends on the acid's dissociation constant (Ka) and its initial concentration. Without knowing the specific acid, its Ka value, and any other relevant information, it is not possible to provide an accurate numerical value for the equilibrium concentration of H_{3}O^{+}.

In a solution of a weak acid, the acid partially dissociates into H_{3}O^{+} and its conjugate base. The equilibrium concentration of H_{3}O^{+} (represented by [H_{3}O^{+}]) can be determined using an equilibrium expression, which is typically given by the acid's dissociation constant (Ka). The Ka expression is written as [H_{3}O^{+}][A-]/[HA], where [A-] represents the concentration of the conjugate base and [HA] represents the concentration of the undissociated acid.

To calculate the equilibrium concentration of [tex]H_{3}O^{+}[/tex] you would need to know the initial concentration of the weak acid ([HA]) and the value of Ka. By solving the equilibrium expression with these values, you can determine the equilibrium concentration of H_{3}O^{+}. Keep in mind that the equilibrium concentration may vary depending on the specific weak acid and its Ka value.

Learn more about dissociation here: https://brainly.com/question/28952758

#SPJ11

Given the balanced equation,how many grams of water can be produced with 160. 00g of oxygen


O2+2H2–>2H2O

Answers

According to the balanced equation, 160.00 grams of oxygen will react with excess hydrogen to produce a maximum of 180.00 grams of water.

The balanced equation provided is: [tex]O_2 + 2H_2 - > 2H_2O[/tex]

From the equation, we can see that 1 mole of [tex]O_2[/tex] reacts with 2 moles of H2 to produce 2 moles of [tex]H_2O[/tex]. To determine the amount of water produced, we need to calculate the moles of oxygen and then use the stoichiometry of the equation to find the corresponding moles of water.

First, we convert the given mass of oxygen (160.00 grams) into moles using the molar mass of oxygen, which is approximately 32.00 g/mol. Thus, we have:

160.00 g [tex]O_2[/tex] * (1 mol [tex]O_2[/tex] / 32.00 g O2) = 5.00 mol O2

According to the stoichiometry of the balanced equation, 1 mole of [tex]O_2[/tex] produces 2 moles of [tex]H_2O[/tex]. Therefore, 5.00 moles of [tex]O_2[/tex] will produce:

5.00 mol [tex]O_2[/tex] * (2 mol [tex]H_2O[/tex] / 1 mol [tex]O_2[/tex]) = 10.00 mol [tex]H_2O[/tex]

Finally, we convert the moles of water into grams using the molar mass of water, which is approximately 18.00 g/mol. Thus, the mass of water produced from 160.00 grams of oxygen is:

10.00 mol H2O * (18.00 g H2O / 1 mol H2O) = 180.00 g H2O

Therefore, 160.00 grams of oxygen will react to produce a maximum of 180.00 grams of water according to the balanced equation.

Learn more about balanced equation here:

https://brainly.com/question/31242898

#SPJ11

entropy is... a measure of the degree of disorder in a system. increasing. what gives meaning to the arrow of time. what prevents us from making a perpetual motion machine.

Answers

Entropy is a fundamental concept in physics that refers to the degree of disorder in a system. It is a measure of the number of ways in which the atoms and molecules of a system can be arranged, and the more ways they can be arranged, the greater the entropy.

The Second Law of Thermodynamics states that the entropy of a closed system always increases with time, which is what gives meaning to the arrow of time. This means that any process that occurs in a closed system will always lead to an increase in the system's entropy. This is also what prevents us from creating a perpetual motion machine, which is a machine that can operate indefinitely without the need for an external energy source.

The Second Law of Thermodynamics shows that this is impossible because any machine will always lose some of its energy to its surroundings in the form of heat, which increases the entropy of the system and makes it less efficient.

To know more about Entropy click here:

https://brainly.com/question/13135498

#SPJ11

1. choose the molecule or compound that exhibits dispersion forces as its strongest intermolecular force. a) o2 b) co c) hf d) nacl

Answers

The molecule that exhibits dispersion forces as its strongest intermolecular force is O2 (oxygen gas).

Dispersion forces, also known as London dispersion forces or van der Waals forces, are the weakest type of intermolecular force.

They arise from temporary fluctuations in electron distribution around molecules.

Among the given options, O2 (oxygen gas) is a nonpolar molecule and only exhibits dispersion forces as its strongest intermolecular force.

CO has dipole-dipole interactions due to its polar nature, HF has hydrogen bonding due to the presence of a highly electronegative F atom, and NaCl is an ionic compound with strong electrostatic attractions between ions.

For more such questions on molecule, click on:

https://brainly.com/question/475709

#SPJ11

The molecule that exhibits dispersion forces as its strongest intermolecular force among the options given is: option a) O2


Dispersion forces, also known as London dispersion forces or van der Waals forces, are the weakest type of intermolecular force and occur between all molecules, including nonpolar molecules. Here's a brief analysis of the options:

a) O2 is a nonpolar molecule as it consists of two oxygen atoms bonded together. In the absence of any other stronger forces, dispersion forces will be the strongest intermolecular force for O2.

b) CO is a polar molecule due to the difference in electronegativity between carbon and oxygen atoms. It experiences dipole-dipole forces as its strongest intermolecular force.

c) HF is a polar molecule and also forms hydrogen bonds due to the presence of a highly electronegative fluorine atom bonded to hydrogen. Hydrogen bonding is the strongest intermolecular force in HF.

d) NaCl is an ionic compound, which means it has strong ionic bonds between the sodium and chloride ions. Ionic bonds are stronger than intermolecular forces like dispersion forces.

So, among these options, O2 exhibits dispersion forces as its strongest intermolecular force.


Learn more about intermolecular force here:

https://brainly.com/question/14149657


#SPJ11

The Ka for formic acid, HCOOH, is 1.77 x 10-4. HCOOH (aq) + H2O (l) <---> COOH- (aq)+H3O (aq) What is the pH of a buffer made from 2.0 M HCOOH and 3.0 M COOH-? (6 pts)

Answers

The pH of a buffer made from 2.0 M HCOOH and 3.0 M COO is 3.98.

Buffers are typically made by mixing a weak acid with its conjugate base or a weak base with its conjugate acid. In this case, the buffer is made from the weak acid HCOOH (formic acid) and its conjugate base COO⁻ (formate).

The Henderson-Hasselbalch equation is a mathematical expression that relates the pH of a buffer solution to the pKa of the weak acid and the ratio of the concentrations of the weak acid and its conjugate base.  

pH = pKa + log([conjugate base]/[weak acid])

By substituting the given concentrations of HCOOH and COO⁻ into the Henderson-Hasselbalch equation, we can calculate the pH of the buffer. The result, : pH = pKa + log([COOH-]/[HCOOH]) and pH = 3.75 + log(3.0/2.0) = pH = 3.98, indicates that the buffer is slightly acidic, which is expected since the pKa of HCOOH is less than 7.

The buffer is able to resist changes in pH when small amounts of acid or base are added to it, which makes it useful in many biochemical and analytical applications where maintaining a constant pH is important.

To know more about  Henderson-Hasselbalch equation, refer here:

https://brainly.com/question/13423434#

#SPJ11

1. What pressure of H2 gas is produced if 22.98 g of Al is reacted with excess HCl in a sealed 17.9 L container at a temperature of 300 K?
4 Al(s) + 7 HCl(aq) ---> 4AlCl3(aq)+6H2(g)
First, calculate the number of moles of H2 formed in this reaction and show the conversions required to solve this problem.
22.98 g Al * ( ___ / ___) * ) (___/___) = 1.29 mol H2
Answer Bank: 3 mol H2, 2 mol Al, 1 mol Al, 26.98 g Al, 1 mol HCl, 2.02 g H2, 1 mol AlCl3, 2 mol AlCl3, 133.34 g AlCl3, 36.46 g HCl, 6 mol HCl, 1 mol H2.
1b. In the reaction MgCO3(s) ---> MgO(s) + CO2(g) what magnesium carbonate, MgCO3, is required to produce 515 L of carbon dioxide, CO2, measured at STP?
mass: ______ g

Answers

The moles of MgCO3 to mass: 23 mol MgCO3 * (84.31 g MgCO3 / 1 mol MgCO3) = 1939.13 g MgCO3
mass: 1939.13 g

To calculate the pressure of H2 gas produced in the reaction, we need to use the ideal gas law: PV = nRT
where P is the pressure in atmospheres (atm), V is the volume in liters (L), n is the number of moles, R is the gas constant (0.0821 L·atm/mol·K), and T is the temperature in Kelvin (K).
4 Al(s) + 7 HCl(aq) ---> 4AlCl3(aq)+6H2(g)
1 mol Al reacts to produce 6/4 = 1.5 mol H2
So, 22.98 g Al * (1 mol Al / 26.98 g Al) * (1.5 mol H2 / 1 mol Al) = 1.29 mol H2
Now we can substitute the values into the ideal gas law:
PV = nRT
P = nRT/V
P = (1.29 mol)(0.0821 L·atm/mol·K)(300 K) / 17.9 L
P = 1.38 atm
Therefore, the pressure of H2 gas produced is 1.38 atm.

To calculate the mass of magnesium carbonate required to produce 515 L of carbon dioxide at STP (standard temperature and pressure), we need to use the following conversion factors:
1 mole of MgCO3 produces 1 mole of CO2
1 mole of any gas at STP occupies 22.4 L
22.98 g Al * (1 mol Al / 26.98 g Al) * (6 mol H2 / 4 mol Al) = 1.29 mol H2
1b. To determine the mass of MgCO3 required to produce 515 L of CO2 at STP, first, we need to find the moles of CO2. Since 1 mol of any gas occupies 22.4 L at STP, we have:
515 L CO2 * (1 mol CO2 / 22.4 L CO2) = 23 mol CO2
Now, we use the molar ratio from the balanced equation:
23 mol CO2 * (1 mol MgCO3 / 1 mol CO2) = 23 mol MgCO3

To know more about reaction visit:-

https://brainly.com/question/28984750

#SPJ11

use the tabulated half-cell potentials to calculate δg° for the following balanced redox reaction. 3 i2(s) 2 fe(s) → 2 fe3 (aq) 6 i⁻(aq)

Answers

The ΔG° for the given redox reaction is +29,068 J/mol. The positive value indicates that the reaction is not spontaneous under standard conditions (1 atm and 25°C).

The standard Gibbs free energy change (ΔG°) for the given balanced redox reaction: 3I₂(s) + 2Fe(s) → 2Fe³⁺(aq) + 6I⁻(aq).Can be calculated using the tabulated half-cell potentials. The ΔG° of a reaction is related to the cell potential (E°) by the equation ΔG° = -nFE°, where n is the number of electrons transferred and F is the Faraday constant (96,485 C/mol).

The half-cell reactions involved in this redox reaction are:

Fe³⁺(aq) + e⁻ → Fe²⁺(aq) E° = +0.77 V

I₂(s) + 2e⁻ → 2I⁻(aq) E° = +0.62 V

To calculate the ΔG° for the overall reaction, we need to multiply the Fe reaction by 3 and the I₂ reaction by 2 to balance the electrons:

3Fe³⁺(aq) + 3e⁻ → 3Fe²⁺(aq) (multiply by 3)

I₂(s) + 2e⁻ → 2I⁻(aq) (multiply by 2)

Adding these half-cell reactions gives:

3Fe³⁺(aq) + 2I₂(s) → 3Fe²⁺(aq) + 6I⁻(aq)

The cell potential (E°cell) for the overall reaction can be calculated by subtracting the reduction potential of the anode (Fe³⁺/Fe²⁺) from the reduction potential of the cathode (I₂/I⁻): E°cell = E°cathode - E°anode

E°cell = (+0.62 V) - (+0.77 V)

E°cell = -0.15 V

Using the equation ΔG° = -nFE°cell and plugging in the values, we get:

ΔG° = -nFE°cell

ΔG° = -(2 mol)(96,485 C/mol)(-0.15 V)

ΔG° = +29,068 J/mol

learn more about  redox reaction here:

https://brainly.com/question/13293425

#SPJ11

Amos is a waiter. He earns $3. 50 per hour


plus tips. Last weekend, Amos earned


$150. 00 in tips and more than $206. 00 total.


Write an inequality for this situation where


h represents hours worked.

Answers

To represent the given situation where Amos is a waiter earning $3.50 per hour plus tips, and he earned $150.00 in tips and more than $206.00 in total, we can write the following inequality in terms of the number of hours worked, represented by h:

The inequality representing the situation is 3.50h + 150 > 206.

The term 3.50h represents Amos' earnings based on the number of hours worked. Multiplying the hourly rate of $3.50 by the number of hours worked gives us the earnings before tips. Adding the tip amount of $150.00 to the earnings gives us the total amount earned, which should be greater than $206.00.

Therefore, the inequality 3.50h + 150 > 206 represents the situation where Amos earns $3.50 per hour, receives $150.00 in tips, and the total earnings exceed $206.00.

To learn more about inequality click here : brainly.com/question/30231017

#SPJ11

how many reducing equivalents (equal to electrons) are transferred to electron carriers after one turn of the citric acid cycle? A. 4 B. 6 C. 8 D. 10 E. 16

Answers

After one turn of the citric acid cycle, a total of 8 reducing equivalents (equal to electrons) are transferred to electron carriers.

During the citric acid cycle, also known as the Krebs cycle or the tricarboxylic acid (TCA) cycle, one molecule of acetyl-CoA enters the cycle. In a complete turn of the cycle, this acetyl-CoA molecule is fully oxidized.

In the citric acid cycle, three NADH molecules, one FADH2 molecule, and one GTP (or ATP) molecule are produced per acetyl-CoA molecule that enters the cycle. Both NADH and FADH2 are considered to be reducing equivalents since they carry electrons.

Specifically, the reducing equivalents produced in one turn of the citric acid cycle are:

- Three molecules of NADH, which each carry 2 electrons (3 * 2 = 6 electrons)

- One molecule of FADH2, which carries 2 electrons (2 electrons)

Total reducing equivalents = 6 electrons + 2 electrons = 8 reducing equivalents

Therefore, the correct answer is C. 8 reducing equivalents.

To know more about citric acid cycle refer here

https://brainly.com/question/11238674#

#SPJ11

redict the products for the following precipitation reaction: nicl2(aq) (nh4)2s(aq)→

Answers

In this case, the formation of the solid nickel sulfide ([tex]$\mathrm{NiS}$[/tex]) is easily observable as a yellowish-brown precipitate.

The balanced chemical equation for this reaction is:

[tex]$$\mathrm{NiCl_2(aq) + (NH_4)_2S(aq) \rightarrow NiS(s) + 2NH_4Cl(aq)}$$[/tex]

In this equation, [tex]\mathrm{NiCl_2}$ and $\mathrm{(NH_4)_2S}$[/tex] are the reactants and [tex]$\mathrm{NiS}$[/tex] and [tex]$\mathrm{NH_4Cl}$[/tex] are the products. The reactants are both aqueous (dissolved in water), while the products are a solid ([tex]$\mathrm{NiS}$[/tex]) and an aqueous solution ([tex]$\mathrm{NH_4Cl}$[/tex]).

The reaction occurs because nickel ions ([tex]$\mathrm{Ni^{2+}}$[/tex]) from [tex]$\mathrm{NiCl_2}$[/tex] react with sulfide ions ([tex]$\mathrm{S^{2-}}$[/tex]) from[tex]$\mathrm{(NH_4)_2S}$[/tex] to form insoluble nickel sulfide [tex]($\mathrm{NiS}$[/tex]) which precipitates out of solution. Ammonium ions ([tex]$\mathrm{NH_4^{+}}$[/tex]) and chloride ions ([tex]$\mathrm{Cl^{-}}$[/tex]) from [tex]$\mathrm{NiCl_2}$[/tex] and [tex]$\mathrm{(NH_4)_2S}$[/tex] respectively, remain in solution as soluble ammonium chloride.

The precipitation reaction is an important type of chemical reaction in which a solid forms when two aqueous solutions are mixed. In this case, the formation of the solid nickel sulfide ([tex]$\mathrm{NiS}$[/tex]) is easily observable as a yellowish-brown precipitate. The reaction is also useful in analytical chemistry for detecting the presence of nickel ions in solution, since the formation of the yellowish-brown precipitate indicates the presence of nickel ions.

To learn morea about precipitation refer here:

https://brainly.com/question/18109776

#SPJ11

To how many sites on a transition metal can one EDTA species bind at the same time? 3. 4. The starting material for many of the compounds to be synthesized is cobalt chloride hexahydrate, CoCl2 6H20. What is the oxidation state of the cobalt in this starting material?

Answers

One EDTA species can bind to a transition metal at a maximum of 6 sites at the same time.EDTA (ethylenediaminetetraacetic acid) is a chelating agent that can form coordinate bonds with metal ions. It has four acidic protons and two amine groups, which can form six coordinate bonds with a transition metal ion. Each coordinate bond involves a pair of electrons shared between the EDTA molecule and the metal ion.

The oxidation state of cobalt in cobalt chloride hexahydrate, CoCl2·6H2O, is +2. This is because the chloride ion has a charge of -1, and there are two chloride ions in the compound, so their total charge is -2. To balance this, the cobalt ion must have a charge of +2. The water molecules are neutral and do not affect the oxidation state of the cobalt ion.

One EDTA species can bind to 6 sites on a transition metal at the same time, and the oxidation state of cobalt in cobalt chloride hexahydrate (CoCl2·6H2O) is +2.EDTA (ethylenediaminetetraacetic acid) is a hexadentate ligand, meaning it has 6 donor atoms that can form coordinate covalent bonds with a central metal ion. Therefore, it can bind to 6 sites on a transition metal simultaneously.
To know more about metal visit

https://brainly.com/question/28650063

#SPJ11

draw the product that valine forms when it reacts with t-buo-co-cl/triethylamine; then wash with aqueous hcl.

Answers

The product that valine forms when it reacts with t-buo-co-cl/triethylamine; then wash with aqueous HCl is shown in the image attached.

What is the product formed in the reaction?

Valine is an amino acid with the structural components of an amino group (-NH2) and a carboxylic acid group (-COOH). A process known as acylation occurs when the carboxylic acid group interacts with t-buo-co-cl (tert-butyl chloroformate) in the presence of triethylamine, replacing the -OH group with the -OCO-t-bu (tert-butyl carbonate) group.

The tert-butyl carbonate group is hydrolyzed to produce tert-butanol and CO2 when the product is washed with aqueous HCl, culminating in the creation of valine hydrochloride salt.

Learn more about valine:https://brainly.com/question/17168106

#SPJ1

title = q5a4 for the phosphite ion, po33- the electron domain geometry is _______(i)________ and the molecular geometry is ______(ii)________?

Answers

For the phosphite ion (PO₃³⁻), the electron domain geometry is (i) tetrahedral, and the molecular geometry is (ii) trigonal pyramidal.

The phosphite ion has phosphorus (P) as its central atom, which is surrounded by three oxygen (O) atoms and has one lone pair of electrons. The electron domain geometry refers to the arrangement of electron domains (including bonding and non-bonding electron pairs) around the central atom. In this case, there are three bonding domains (the P-O bonds) and one non-bonding domain (the lone pair of electrons), which form a tetrahedral shape.

The molecular geometry refers to the arrangement of atoms in the molecule, not including lone pairs of electrons. In the case of the phosphite ion, the three oxygen atoms surround the central phosphorus atom in a trigonal pyramidal arrangement. The presence of the lone pair of electrons on the phosphorus atom causes a slight distortion in the bond angles, making them smaller than the ideal 109.5 degrees found in a perfect tetrahedral arrangement. This is due to the repulsion between the lone pair of electrons and the bonding electron pairs, which pushes the oxygen atoms closer together.

Learn more about molecular geometry here: https://brainly.com/question/30130883

#SPJ11

Other Questions
Balance the following half-reactions by adding the appropriate number of electrons (e"). Then, classify each reaction as an oxidation or reduction half-reaction 1st attempt Part 1 (2 points) Note that for each of the four reactions, one of the gray boxes will be left blank and the other will be filled with electron(s). Use the symbole to represent an electron ____ + Fe2+ (aq) > Fe3+ (aq) + ___Choose one: - Oxidation - Reduction Part 2 (2 points)___ + Agl(s) > Ag(s) + I- (aq) + ___Choose one: - Oxidation - Reduction Part 3 (2 points)___ +VO2+ (aq) + 2H+ (aq) > VO2+ (aq) +H2O(l) + ___Choose one: - Oxidation - Reduction light of wavelength = 630 nm and intensity i0 = 250 w/m2 passes through a slit of width w = 3.6 m before hitting a screen l = 1.7 meters awayUse the small angle approximation to write an equation for the phase difference, , between rays that pass through the very top and very bottom of the slit when the rays hit a point y - 79 mm above the central maximunm. Imagine a man in the sahara regretting that he had no sand for his hour-glass. what does it means? Match the letters to the correct terms a rectangular wing of aspect ratio 10 is flying at a mach number of 0.6. what is the approximate value of dcl/da Work with nulls and test expressions 12. Write a SELECT statement that returns these columns from the Invoices table: invoice_number invoice_ date balance_due payment_date The invoice_number column The invoice_date column The invoice_total column minus the payment_total and credit_total columns The payment_date column Return only the rows where the payment_date column contains a null value. This should retrieve 11 rows. 1. Suppose you weigh 580.00 Newtons (that is about 130 pounds) when you are standing on a beach near San Diego. How much will you weigh at Big Bear lake, which is about 2000 meters high? 2. A spring, with spring constant k = 0.50 N/m, has an m = 0.20 kg mass attached to its end. During its (horizontal) oscillations, the maximum speed achieved by the mass is Umax = 2.0 m/s. (a) What is the period of the system? (b) What is the amplitude of the motion? Water can be added across a double bond using an oxymercuration-reduction reaction. On the following molecules, select the carbons where OH would be added by this reaction. 1st attempt hi See Periodic Table To select/highlight a carbon, click on it. C Solve the following equation for x, where 0x two narrow slits 70 m apart are illuminated with light of wavelength 550 nm . part a what is the angle of the m = 3 bright fringe in radians? which luxury automaker is preparing to go public, with 911 million shares up for grabs? finding the nullspace of a matrix in exercises 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, and 40, find the nullspace of the matrix. The structures of two compounds commonly found in food, lauric acid, C 12H 24O 2, and sucrose, C 12H 22O 11* are shown above. (a) Which compound, lauric acid or sucrose, is more toluble in water? Changes in a companys capital expenditures or fixed asset sales over time must: _______ Let f be the function defined by f(x) For how many values of x in the open interval (0, 1.565) is the instantaneous rate of change of f equal to the average rale of change = of f on the closed interval [0. 1.565] (A) Zero (B) One (C) Three (D) Four Consider the hypothetical observation "a planet beyond saturn rises in west, sets in east. " this observation is not consistent with a sun-centered model, because in this model __________. A university degree isn't necessary for that job. Use a modal verb how could mike justify introducing the intentional slowdown in processing power? An unhappy 0.300-kg rodent, moving on the end of a spring with force constant k = 2.50 N/m, is acted on by a damping force Fx = bvx. (a) If the constant b has the value 0.900 kg/s, what is the frequency of oscillation of the rodent? (b) For what value of the constant b will the motion be critically damped? x = 3 cos ( u ) sin ( v ) x=3cos(u)sin(v) y = 3 sin ( u ) sin ( v ) y=3sin(u)sin(v) z = 3 cos ( v ) z=3cos(v) 0 u 0u 1.57incorrect , 0 v 0v 1.57