Answer:
92.86 kgExplanation:
lThe mass of an object given only it's force and acceleration can be found by using the formula
[tex]m = \frac{f}{a} \\ [/tex]
f is the force
a is the acceleration
From the question
f = 195 N
a = 2.1 m/s
We have
[tex]m = \frac{195}{2.1 } = 92.857142... \\ [/tex]
We have the final answer as
92.86 kgHope this helps you
You get in your car after work and turn on the radio. What type of communication does the radio use?.
Answer:
Radio waves
Explanation:
The radio operates by the principles of radio wave.
Electromagnetic wave is a type of wave which does not require material medium for its propagation. A radio wave is an example of electromagnetic wave.
The radio operates in the principle of electromagnetic wave because it does not require material medium for its propagation and it has one of the longest frequency of electromagnetic spectrum.
Thus, we can conclude that the radio operates by the principles of radio wave.
Learn more about radio waves here: https://brainly.com/question/69373
A driver is moving forward and stepping on the gas pedal. Which
position-time graph best depicts this motion?
Answer:
D
Explanation:
what is heliocentric?
Answer:
having or representing the sun as the centre, as in the accepted astronomical model of the solar system.
Explanation:
Heliocentrism is the astronomical model in which the Earth and planets revolve around the Sun at the center of the Universe. Historically, heliocentrism was opposed to geocentrism, which placed the Earth at the center.
2. What are the challenges of wind energy that causes decrease in the electrical production?
3. Give two solutions:
1. Modification in the structure of the turbine
2. Modification in the function of the turbine.
4. You must estimate the cost in each solution, and which one is more affordable and efficient for the municipality to go for.
5. You must make sure that there is minimal energy loss.
Levelized production cost is a big challenge in the production of wind energy.
The main challenge in the production of wind energy is the high production cost. It has to minimize the Levelized Production Cost (LPC) which is the ratio between energy production cost and economic lifetime. This problem can be solved by doing modification in the structure of the turbine as well as we must ensure minimal energy loss.
The modification in the structure can produce more electrical energy and reduce the energy loss also provides more profit to the company so we can conclude that levelized production cost is a big challenge in the production of wind energy.
Learn more: https://brainly.com/question/25543609
I will give 100 Points, 5-stars, and Brainliest
Direct contact is necessary for which type of energy transfer?
A. Conduction
B. Sound Waves
C. Conduction
D. Convection
Answer:
Conduction
Explanation:
Because when a molecule is transferred to another molecule then this in going into direct contact
For example if we have a pan and it is boiling well the heat that is on the pan holder that stays in place and it won`t move anywhere else like there is Radiation and Convection but for this question the answer would be Conduction
helpp I'll give brainliest smth
Why there has to be a driving force to keep the car moving at a constant speed?
Explanation:
For example, when a car travels at a constant speed, the driving force from the engine is balanced by resistive forces such as air resistance and friction in the car's moving parts. ... an object falling at terminal velocity experiences the same air resistance as its weight.
The magnitude of vector A is 2.5 m and is directed towards east. The magnitude and direction of A /2 will be
The magnitude and direction of half of the given vector A is 1.25 m east.
The given parameters;
magnitude of vector A = 2.5 m eastA vector can be described with both magnitude and direction. The magnitude of the vector is the scalar or numeric representation of the vector.
When the scalar representation has direction, we term the quantity a vector quantity.
The magnitude of half of the given vector is calculated as follows;
[tex]\frac{A}{2} = \frac{2.5 \ m}{2} = 1.25 \ m\ east[/tex]
Thus, the magnitude and direction of half of the given vector A is 1.25 m east.
Learn more here:https://brainly.com/question/14586816
A 2 kg mass starts from rest and slides down an inclined plane 4 m long in 1 second. What net force is acting on the mass along the incline *.
The net force acting on the mass along the incline is equal to 16 Newton.
Given the following data:
Mass = 2 kgDistance = 4 metersTime = 1 secondsTo determine the net force acting on the mass along the incline:
First of all, we would find the acceleration of the mass by using the second equation of motion:
[tex]S = ut+ \frac{1}{2} at^2\\\\4 = 0(1) + \frac{1}{2} a(1)^2\\\\4=\frac{a}{2}\\\\a=2\times 4[/tex]
Acceleration, a = 8 [tex]m/s^2[/tex]
For the net force, we would apply Newton's Second Law of Motion:
[tex]F_{net} = mass \times acceleration\\\\F_{net} =2 \times 8[/tex]
Net force = 16 Newton.
Read more here: https://brainly.com/question/20037336
what is the net force on a car moving in a straight line with a constant velocity
Answer:
For example, when a car travels at a constant speed, the driving force from the engine is balanced by resistive forces such as air resistance and friction in the car's moving parts. The resultant force on the car is zero.
Explanation:
hope this helps
Answer:
zero
Explanation:
The acceleration of the car is zero, and and in this case the velocity is also zero. When your car is moving at constant velocity down a street, the net force must also be zero, according to Newton's First Law.
A piece of iron has a density of 7.86 g/cm3 and a mass of 1.09 x 10^-1 kg. Calculate the volume of the piece of iron.
Which wave has the longest wavelength?
Answer:
A
Explanation:
Will give brainliest!
Answer:
chemical symbol
Explanation:
Is mixing mixing sugar and cinnamon a chemical or physical change?
Answer:
It is a physical
Explanation:
what is the mass of an object if it’s weight on earth is 1150N
Answer:
calculate it by using formula w=m×g
The mass of an object if its weight on earth is 1150N is 117.347 kg.
What is Weight?The weight of an object is defined as the force that acts on the object due to gravity. Sometimes weight is defined as a vector quantity, the force of gravity acting on an object. Others define weight as a scalar quantity, the magnitude of the force of gravity.
It is gravitational force of attraction on an object which is caused by the presence of a massive second object like Earth or Moon. Weight is expressed by multiplying the mass times the acceleration due to gravity.
W=mg
Where, W= weight of the object
m= Mass of the object
g= Acceleration due to gravity i.e. [tex]9.8[/tex] [tex]m/s^2[/tex]
In above information,
W= 1150N
g= [tex]9.8[/tex] [tex]m/s^2[/tex]
Using the formula
m=W/g
m=1150/9.8
m=117.347 kg
Thus, the mass of an object if its weight on earth is 1150N is 117.347 kg.
Learn more about Weight, here:
https://brainly.com/question/23312072
#SPJ2
Question #4
What is the charge on Can 2 at the moment
shown in panel B?
Question #5
What is the charge on the ball at the
moment shown in panel B?
A. Same as Van de Graaff
B. Opposite of Van de Graaff
C. Neutral
A. Same as Van de Graaff
B. Opposite of Van de Graaff
C. Neutral
Answer:
Q4
A
Q5
B
Explanation:
BRAINLIEAST IW8W9 HAHAH YAN NA PO TALAGA
calculate the density, in g/l, of sf6 gas at 27°c and 0.500 atm pressure.
The density of the SF₆ gas at the given pressure and temperature is 2.96 g/l.
The given parameters:
temperature of the SF₆ gas, T = 27 ⁰C = 273 + 27 = 300 Kpressure of the SF₆ gas, P = 0.5 atmThe molecular mass of the SF₆ gas is calculated as follows;
M of SF₆ = 32 + (6 x 19) = 146 g/mol
The density of the SF₆ gas is calculated by applying ideal gas law as follows;
[tex]PV = nRT\\\\PV = \frac{m}{M} RT\\\\PM = \frac{m}{V} RT\\\\PM = \rho RT\\\\\rho = \frac{PM}{RT}[/tex]
where;
[tex]\rho[/tex] is the density of the gasR is the ideal gas constant = 0.0821 L.atm/mol.K[tex]\rho = \frac{0.5 \times 146}{0.0821 \times 300} \\\\\rho = 2.96 \ g/l[/tex]
Thus, the density of the SF₆ gas at the given pressure and temperature is 2.96 g/l.
Learn more here:https://brainly.com/question/21912477
a block weighing (Fg) 500 N is resting on a steel table ( us=0.74) the minimum force start this block moving is?
The minimum force required to start this block moving is 370 N.
The given parameters;
weight of the block, W = 500 Ncoefficient of static friction, [tex]\mu_s[/tex] = 0.74The minimum force required to start this block moving is calculated as follows;
[tex]F= \mu_s F_n[/tex]
where;
[tex]F_n[/tex] is the normal force on the block which is equal to the weight of the block
[tex]F= \mu_s F_n \\\\F= \mu_s W\\\\F = 0.74 \times 500 \\\\F= 370 \ N[/tex]
Thus, the minimum force required to start this block moving is 370 N.
Learn more here: https://brainly.com/question/13877320
Where could light travel the easiest and fastest?
A) through air
B) through empty space
C) through liquid hydrogen
Explanation:
Light travels fastest through air
Answer:
try through air
Explanation:
Please help! Question is attached.
Answer:
a. 6
b. 6 m/s²
c. 300 m to the right
d. 30 secs
Explanation:
slope = rise /run
60-0/10-0
= 6
b. slope = acceleration = 6 m/s²
c. d=ut+1/2at²
t=10 (segment A last for 10 secs)
u - initial velocity = 0
so d = 0(10)+1/2*6*10²
=300 m
A group of waves is propagated at a speed that is ________ the speed of the individual waves in deep water.
lonic Naming Practice
Write the name of the following chemical compound:
Na3Cl1
Answer:
sodium chloride. .....
Using Boyle's law, predict what will happen to a balloon that an ocean diver takes to a pressure of 202 kPa.
NO LINKS YA FILTHY VERMINS
Answer:
Balloon that an ocean diver takes to a pressure of 202 k Pa will get reduced in size that is the volume of the balloon will get reduced
Explanation:
Which two events are part of the rock cycle?
A. Existing rock is melted aboveground and erodes.
B. Existing rock is weathered by water and erodes.
C. Solid rock is heated under high pressure and melts.
D. Solid ice is warmed by sunlight and evaporates.
Answer:
Explanation:
help -----------------------------------------
Answer:
H,G,E,D,C,B,A,I,F
Explanation:
F is an ignious intrusion and I cross cuts H to A so it must be newer.
if you dropped a ball and you dropped a hammer will the two objects fall at the same speed or will they fall at a different speed
Answer:
they would fall at different speeds
Explanation:
The speed at which each falls is dependent on air resistance
What is an energy storage device composed of electrochemical cells?
An energy storage device composed of electrochemical cells is referred to as: battery.
A power source can be defined as a source of electrical energy that is used to power all electronic devices.
Generally, a power source can be classified into two (2) main categories and these include:
Alternating current (AC)Direct current (DC)A battery refers to an energy storage device that comprises electrochemical cells and it serve as a source of direct current (DC). Also, sometimes a battery can be recharged when its electrochemical cells are still active.
Read more on battery here: https://brainly.com/question/4922532
Answer:
Battery is an electrical energy storage device consisting of one or more electrochemical cells with external connections that provide power to electrical devices such as flashlights, smartphones, and electric cars.
helppp mee pllleasse
Answer:
up swelling moves water horizontally
When waves are closer together, the distance between them is _________, therefore the waves have __________ wavelength.
Answer:
less' shorter
Explanation:
be cuase science
Answer:
The answer is D.
Explanation:
When waves are closer together, the distance between them is less, therefore the waves have longer wavelength.
Help me quick!!! please!!
Calculate the power of an engine which raises a mass of 1000 kg to a height of 40 m in 10 s.
Answer:
39.240 W
Explanation:
Let's start by calculating the work done by the engine. We can assume that it is the same work done by the weight of the object to bring it from 40m to the surface: as much energy it takes to bring it up, the same ammount it takes to bring it down. Said work is [tex]w= \vec F\cdot \vec{h} = mg h = 1000 \times 9.81\times 40 = 392.400 J[/tex]
At this point we can simply apply the definition of power, that is [tex]P = \frac wt[/tex], to get the power of the engine is [tex]39.240 W[/tex]
Answer:
P=39200W
Explanation:
P=(mgh)/t
P=(40×9.8×1000)/10
P=39200W
What would a force diagram for something WHILE it is being thrown DOWNWARDS look like?
Ty
Answer:
it look the same just to tell you