(b) The equation for the decomposition of hydrated zinc sulfate is
Zn50,-7H₂O(s)→ ZnSO (s) + 7H,01)
The student records these masses.
mass of boiling tube
= 41.64g
mass of boiling tube + Zn50,-7H₂O = 54.46g
Calculate the maximum volume, in cm³, of pure water that could be produced.
Give your answer to 1 decimal place.
[1.00 cm¹ of pure water has a mass of 1.00 gl
[M, of Zn50, 7H,0 = 287 M, of H₂O = 18]

For a 5 mm NMR tube, the solvent should be about 4 cm deep. So, correct option is A.

A well prepared  NMR tube solution is significant for obtaining quality spectra.

Decision of Dissolvable:

NMR tests are customarily finished in deuterated solvents, yet you can gather usable spectra in non-deuterated solvents (no-D NMR) also. While choosing a NMR dissolvable, consider:

Dissolvability

The dissolvable's compound shift. Will the leftover dissolvable sign disrupt test resonances. Substance shifts are dissolvable ward, so if you need to contrast your outcomes and a distributed range, ensure you utilize a similar dissolvable.

Dissolvable Virtue:

Numerous deuterated solvents are accessible to buy in the Science stockroom. The "%" esteem on a NMR dissolvable jug alludes to the degree of deuteration, not virtue. On the off chance that you have an especially requesting application you might need to purge the dissolvable. In the event that you have a water-delicate analyte you should dry the dissolvable preceding use. We suggest 3 Å, Linde-type, tube shaped sub-atomic strainers.

The standard round sifters will generally deliver dust, which can prompt shimming issues. Enact the strainers in a drying stove and cool inside a desiccator prior to adding them to your dissolvable. Wrap parafilm around the covers of dissolvable containers to prevent dampness from getting in. Note: Parafilm is great for keeping water out however it won't keep apolar solvents in your cylinder.

Hence,correct option is A.

To know more about NMR ,visit here:

https://brainly.com/question/29584696

#SPJ4

Answer:

Question does not show the problem in its entirety

Explanation:

The region of the enzyme where the substrate attaches is referred to as the active site because this is where the catalytic "activity" occurs.

The complete question is:

Classify each phrase as describing an enzyme, an active site, or a substrate.

a. A biological catalyst

b. A protein containing an active site

c. A specific enzyme location that binds with the substrate

d. A substance that the enzyme acts upon

e. May be a phosphate group

To learn more about Enzymes, refer to:

https://brainly.com/question/2536131

#SPJ4

Neon (Ne) has an atomic mass of 20.180 u, where "u" stands for atomic mass units. This number is a weighted average of the masses of all naturally occurring neon isotopes.

Since neon has three stable isotopes, it does not degrade over time. They are neon-20 (with a 90.92% abundance), neon-21 (with a 0.26% abundance), and neon-22 (8.82% abundance). An isotope's atomic mass is the sum of the number of protons and neutrons in its nucleus.

Neon-20 has ten protons and ten neutrons, neon-21 contains ten protons and eleven neutrons, and neon-22 contains ten protons and twelve neutrons. To compute the atomic mass of neon, we use the weighted average of its isotopes' atomic masses while accounting for their respective abundances.

We may compute the atomic mass of neon using isotopic abundances and atomic masses as follows:

(0.9092 x 20.000 u) + (0.0026 x 20.000 u) + (0.0882 x 22.000 u) = (20.180 u)

For more such questions on atomic mass, click on:

https://brainly.com/question/30390726

#SPJ4

Taking into account the reaction stoichiometry and the definition of ideal gas law, 46.782 grams of Na was needed to react completely with 15.8 liters of chlorine gas at 303 Kelvin and 1.60 atmospheres

In first place, the balanced reaction is:

2 Na + Cl₂ → 2 NaCl

By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:

The molar mass of the compounds is:

By reaction stoichiometry, the following mass quantities of each compound participate in the reaction:

An ideal gas is a theoretical gas composed of a set of point particles with random displacement, which do not interact with each other.

The pressure, P, the temperature, T, and the volume, V, of an ideal gas, are related by the ideal gas law:

P×V = n×R×T

Where:

In this case, you know:

Replacing in the ideal gas law:

1.6 atm×15.8 L = n×0.082 (atmL)÷(molK)× 303 K

Solving:

[1.6 atm×15.8 L]÷ [0.082 (atmL)÷(molK)× 303 K]= n

1.017 moles= n

1.017 moles of Cl₂ react.

The following rule of three can be applied: If by reaction stoichiometry 1 mole of Cl₂ reacts with 46 grams of Na, 1.017 moles of Cl₂ reacts with how much mass of Na?

mass of Na=

mass of Na= (1.017 moles of Cl₂× 46 grams of Na)÷1 moles of Cl₂

mass of Na= 46.782 grams

Finally, 46.782 grams of Na are required.

Learn more about the reaction stoichiometry:

brainly.com/question/24741074

#SPJ1

Answer:

A.Cations are attracted to anions; anions are attracted to cations.

C.Cations are positive, anions are negative.

Explanation:

Cations are positively charged ions, which are formed when a neutral atom donates an electron or an electron pair for bonding and for reaching a more stable electron configuration.

Anions, on the other hand, are negatively charged ions, which are formed when a neutral atom gains an electron or an electron pair for bonding and for reaching a more stable electron configuration.

Through electrostatics, we know that negatives attract positives and vice-versa (Unlikes attract each other). Hence, Cations tend to strongly attract their counterparts, which are Anions.

Also, cations and anions can be innumerable in any substance.

Eg: Common Salt is a crystal lattice constituted by Na+ Cations and Cl- Anions.

Hence, A & C are the correct options.

The radioactive carbon isotope carbon-14 has a nucleus that contains six protons and eight neutrons.

A chemical element that releases radiation when it decomposes and becomes more stable. Radioisotopes can exist naturally or can be created in a lab. They are utilised in medical procedures such as imaging testing and treatment. also known as a radionuclide.

A radioactive isotope is any of numerous distinct forms of the same chemical element with various weights and unstable nuclei. These isotopes spontaneously generate radiation in the form of alpha, beta, and gamma rays as a result of their instability, which demonstrates a significant amount of energy.

Isotopes are atoms of the same element with differing quantities of neutrons. There are radioactive isotopes of several different elements. Since their nuclei are unstable, they decay and release radiation.

Therefore, the correct answer is option a) 8.

The complete question is:

The widely-used radio active isotope of carbon 14C has an atomic number of 6, and a mass number of 14. How many neutrons does carbon have?

a) 8

b) 28

c) 20

d) 12

e) 6

To learn more about radio active isotope refer to:

https://brainly.com/question/18640165

#SPJ4

The heat released by each molecule, in joules, when ethanol undergoes complete combustion exists [tex]2.28 \times 10^{-18} \mathrm{~J}$[/tex].

A substance's heat of combustion, commonly referred to as its calorific value or energy value, is the quantity of heat released when a specific amount of the substance burns.

The number of moles in 1.00 g of ethanol is obtained from;

Mass of ethanol/molar mass of ethanol

Molar mass of ethanol = 46.07 g / mol

Number of moles = 1.00 g} / 46.07 g/mol = 0.022 moles of ethanol

1 mole of ethanol contains 6.022 × 10²³ molecules

0.022 moles of ethanol contains 0.022 moles × 6.022 × 10²³ molecules / 1 mole

= 1.32 × 10²² molecules of ethanol

If 1.32 × 10²² molecules of ethanol release 29.8 × 10³ J of heat

1 molecule of ethanol will release 1 molecule [tex]$\times 29.8 \times 10^{3} \mathrm{~J} / 1.32 \times 10^{2 2$[/tex] [tex]=2.28 \times 10^{-18} \mathrm{~J}$[/tex]

Therefore, the heat released by each molecule, in joules, when ethanol undergoes complete combustion is [tex]2.28 \times 10^{-18} \mathrm{~J}$[/tex].

To learn more about combustion of heat refer to;

https://brainly.com/question/25109613

#SPJ4

12- Crown- 4,  else called lithium ionophore V and- tetraoxacyclododecane, is a crown ether with the chemical formula C8H16O4.  

It's a lithium cation-specific cyclic tetramer of the chemical  emulsion ethylene oxide. The notable opiate ether,  else called diethyl ether, is a natural chemical that's an individual from the wide group of substances known as ether. Itssub-atomic design comprises of two ethyl bunches joined by an oxygen iota, as in C2H5OC2H5. The chemical  emulsion- trichloroethanol has the formula Cl 3CCH 2OH. Its  flyspeck can measure up to that of ethanol with three chlorine iotas at position 2  rather of the methyl bunch. Dimedone(,5- dimethyl) just responds with sulfenic  sharp and does not respond with  dropped thiol. A flexible delegate used in the development of  colorful chemical  particulars, including  medicines, cyclohexenone is a natural  flyspeck.

to know more about Diethyl ether click here:

brainly.com/question/17650569

#SPJ4

The volume of a 0.00554 mol sample of H2 at a pressure of 23.44 torr and temperature of 557 K is 44.68 L.

The ideal gas law states that PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature in Kelvin. Rearranging this equation for V, we get V = nRT / P. Plugging in the given values, we have:

So, the volume of a 0.00554 mol sample of H2 at a pressure of 23.44 torr and temperature of 557 K is 44.68 L.

Learn more about Volume:

https://brainly.com/question/27710307

#SPJ4

CaCl₂ 1 moles lower the freezing point of water more than 1 mol of NaCl because of the amount of dissolved particles determines the colligative qualities.

Colligative qualities are inversely proportional to the quantity of dissolved particles, hence the solution with the highest concentration of dissolved particles will exhibit the largest divergence. When NaCl dissolves, two ions, Na+ and Cl, are produced.

However, CaCl₂ disintegrates into three ions when it dissolves: one Ca²⁺ion, two Cl ions. CaCl₂ will therefore have a 50% greater effect on the freezing point depression than NaCl, mole for mole.

This explanation is overly straightforward. In actuality, you have to take ions' impact on ice and water's equilibrium into account.

factor van't Hoff

Tfreeze = I m Kf provides the freezing point depression.

where

Tfreeze= the change in temperature

I = the van't Hoff factor

for example, NaCl has two particles, CaCl₂ has three, and urea CO(NH₂)₂ has just one particle because it does not dissociate in water)

m= the concentration of the freezing solution

Kf is  cryoscopic constant of the solvent

Learn more about freezing point at https://brainly.com/question/3121416

#SPJ4

It is True that The amount of energy required to remove an electron from an isolated atom or molecule is the ionisation potential. There is an ionization energy for each successive electron removed.

The ionization potential is defined as the minimum amount of energy required to remove an electron from an isolated atom or molecule in its ground state. The ionization potential is dependent on the atomic or molecular species and the energy required to remove each successive electron generally increases as the number of electrons removed increases. This is due to the fact that as electrons are removed, the remaining electrons are held more tightly by the positively charged nucleus, making it increasingly difficult to remove additional electrons.

Learn more about ionization here:

https://brainly.com/question/28385102

#SPJ4

To get the bottom of the meniscus to the volumetric line of the pipette, tilt the pipette slowly and gently while keeping the top of the meniscus level. Make certain that you are gazing at the meniscus at eye level. Finally, add or subtract liquid as needed until the bottom of the meniscus reaches the volumetric line.

Follow these steps to get the bottom of the meniscus to the volumetric line of the pipette:

Fill the pipette with the liquid to be measured by dipping the tip of the pipette in the liquid and bringing it up to the required volume.

Hold the pipette upright and gently pour the liquid out until the meniscus (the curved surface of the liquid) is slightly above the pipette's calibration point.

To adjust the meniscus, use a clean and dry dropper to add or withdraw tiny drops of liquid from the pipette until the meniscus's bottom is at the pipette's calibration mark.

To maintain precision, hold the pipette upright during this operation and add or withdraw the liquid drop by drop.

Once the meniscus has reached the calibration point, you can transfer the liquid to the container of your choice or take any necessary measurements.

When correcting the meniscus, precision is essential since even little deviations might lead to erroneous results. It is also critical to use the correct pipette for the liquid being measured and to follow any special instructions or protocols supplied by your laboratory or project.

For more such questions on pipette, click on:

https://brainly.com/question/13273684

#SPJ4

The molality of C₂H₅OH in the solution is 6.46 m mol/kg.

To calculate the molality of the C₂H₅OH solution, we first need to determine the amount of C₂H₅OH in the solution. We can do this by using the volume and density of the C₂H₅OH:

m = V * d

where m is the mass, V is the volume, and d is the density.

V = 75.0 mL = 0.075 L

d = 0.789 g/mL = 0.789 g/L

So,

m = 0.075 L * 0.789 g/L = 0.0592 g

Next, we need to convert the mass of C₂H₅OH to moles. The molecular weight of C₂H₅OH (ethanol) is 46.068 g/mol, so:

mol = m / MW

mol = 0.0592 g / 46.068 g/mol = 0.00129 mol

Finally, we can calculate the molality of the solution using the following formula:

molality = moles of solute / mass of solvent (in kilograms)

The total mass of the water solvent is 200.0 mL * 1.0 g/mL = 200.0 g. To convert this to kilograms, we divide by 1000:

mass of solvent = 200.0 g / 1000 g/kg = 0.2 kg

So,

molality = 0.00129 mol / 0.2 kg = 0.00646 mol/kg = 6.46 m mol/kg

Therefore, the molality of C₂H₅OH in the solution is 6.46 m mol/kg.

learn more about molality: https://brainly.com/question/1370684

#SPJ1

ATP synthesis is coupled to the proton motive force through oxidative phosphorylation, where a phosphate group is added to ADP.

The proton motive force is also in the transport of various substances across the membrane. Oxidative phosphorylation is dependent on the tricarboxylic acid cycle, and to a lesser extent on pathways such as glycolysis, to provide the "driving force" in terms of NADH and FADH₂ for the electron transport chain. The proton gradient created by proton pumping during the electron transport chain is used to synthesize ATP. When the protons flow through a channel in enzyme, this movement spins the protein, similar to wind drives a turbine. The mechanical movement of these protein roter provides the energy to add an inorganic phosphate group to adenosine diphosphate (ADP) to form ATP.

To learn more about oxidative phosphorylation, refer:

https://brainly.com/question/13254827

#SPJ4

The correct solution to this question here is option c. The volume occupied by 9.03×10²³ molecules of N₂ gas at STP is closest to 33.6 L

We'll start by figuring out how many molecules of N2 gas there are in 9.03×10²³ molecules. This is attainable as follows:

From Avogadro's hypothesis

6.02×10²³ molecules = 1 mole of N₂

Therefore,

9.03×10²³ molecules = 1.5 mole of N₂

Finally, we will calculate the volume that 1.5 moles of N2 at STP occupy.

At standard temperature and pressure (STP),

1 mole of N₂ = 22.4 L

Therefore,

1.5 moles of N₂ = 1.5 × 22.4

1.5 moles of N₂ = 33.6 L

Thus, we can conclude that the volume occupied by 9.03×10²³ molecules of N₂ gas at STP is closest to 33.6 L

Therefore the solution is option c which is 33.6L

Learn more about Avogadro's hypothesis here brainly.com/question/12779877

#SPJ4

Henry's law constant is the constant in henry law that tells about the nature of the gas and other things related to the gas.

A gas law is Henry's law, the partial pressure of a gas above a liquid determines how much of it is dissolved in the liquid. Henry's law constant is the name of the proportionality constant. William Henry, an English chemist, created this rule in the 19th century. Henry's Law may be used to determine the gas's solubility at a new pressure.

P = kC, where P = Gas Pressure.

Henry's Law constant is k.

gas concentration equals C

K describes the gas's characteristics in this passage.

To know more about Henry's law, visit,

https://brainly.com/question/23204201

#SPJ4

part a.

The theoretical yield of hydrofluoric acid is 7.97 grams.

part b.

The percent yield of hydrofluoric acid is 86.2%.

The number of moles of HF produced is calculated as :

moles of HF = 0.194 mol × (4 mol HF / 2 mol H2O)

moles of HF = 0.388 mol

The theoretical yield of HF is given as =

moles of HF × molar mass of HF

theoretical yield of HF = 0.388 mol × 20.01 g/mol

theoretical yield of HF = 7.97 grams

We will  compare the actual yield (6.88 g) to the theoretical yield (7.97 grams) in order to  calculate the percent yield:

percent yield = (actual yield / theoretical yield) × 100%

percent yield = (6.88 g / 7.97 g) × 100%

percent yield = 86.2%

Learn more about percent yield at: https://brainly.com/question/2451706

#SPJ1

An atom is the smallest particle of an element that can retain all its chemical properties.

Atoms are tiny units that control the property of all materials. They are the building blocks of particles. Atoms are the smallest part of an element that still has the element's properties. An atom of gold is dissimilar from an atom of oxygen an atom is the smallest particle of an element, having the same chemical properties as the bulk element.

The tiny unit of matter that has the characteristic properties of its element is called an “atom”. single atoms are called “elements” for that reason.

So we can conclude that The smallest unit of matter that has the usual properties of its element is called an “atom”. Individual atoms are called “elements” for that reason.

Learn more about elements here: https://brainly.com/question/6258301
#SPJ1

The molarity of the solution is 0.16 M. To calculate the molarity, we first need to find the number of moles of sulfuric acid in the solution.

To find the number of moles of sulfuric acid, we divide the mass of sulfuric acid by its molar mass:

17.75 g / 98.08 g/mol = 0.18 moles.

The volume of the solution is 100.0 mL, which is equivalent to 0.100 L. So, the molarity of the solution is 0.18 moles / 0.100 L = 0.16 M.

The molarity of a solution is a measure of the concentration of solute in the solution and is expressed in units of moles per liter (M). In this case, the solution contains 0.16 moles of sulfuric acid per liter of solution.

Learn more about Molarity:

https://brainly.com/question/26873446

#SPJ4

CuO is the proper symbol for copper II oxide. Both the copper and the oxygen in the combination have valences of 2.

A compound's chemical formula serves as a representation of its chemical make-up. The components that make up a compound's molecules as well as the ratio in which their atoms join to produce those molecules are revealed by the chemical formula.

Both copper I oxide and copper II oxide cannot be represented by the formula CuO.

An ionic compound's formula takes into account the metal cation's valency and oxidation state, which are typically represented by a Roman numeral in the compound's name.

Cu2O is a more accurate depiction of the complex copper I oxide. This demonstrates that copper has a valency of 1 in the combination and oxygen has a valency of 2.

CuO is the proper symbol for copper II oxide. Both the copper and the oxygen in the combination have valences of 2.

To learn more about compound's formula refer to:

https://brainly.com/question/13058832

#SPJ4

Alchemy is an ancient practice that is considered to be the precursor to modern chemistry. It was primarily concerned with the transmutation of base metals into gold, the creation of a universal solvent or elixir of life, and the discovery of a universal cure for diseases. Alchemists believed that these goals could be achieved through a combination of chemical processes and spiritual practices.

One of the key concepts in alchemy is the idea of the "philosopher's stone," a substance that was believed to have the ability to turn base metals into gold and grant eternal life. Alchemists spent centuries searching for the philosopher's stone, experimenting with various substances and processes in an attempt to create it.

Although alchemy is often considered to be a pseudoscience, it did contribute to the development of modern chemistry. Many of the techniques and apparatus used by alchemists, such as distillation and the use of laboratory glassware, are still used in modern chemistry labs.

Additionally, alchemists were among the first to discover and isolate many chemical elements, such as phosphorus and mercury.

To know more about Alchemy here:

https://brainly.com/question/5997100#

#SPJ11

We would expect the J-value of proton B to also be 3.0 Hz.

What is the J-value constant?

In nuclear magnetic resonance (NMR) spectroscopy, J-value (also known as J-coupling or coupling constant) refers to the strength of the magnetic interaction between two neighboring nuclei. It is measured in Hertz (Hz) and represents the frequency difference between two energy states of the coupled nuclei.

J-coupling arises from the interaction between the magnetic moments of two nuclei when they are bonded to the same carbon atom in a molecule. The magnitude of the J-coupling constant depends on the distance and bond angle between the nuclei, as well as the electron distribution in the molecule.

If proton A couples to proton B with a J-value of 3.0 Hz, then proton B should also couple to proton A with the same J-value. This is because the J-coupling constant describes the strength of the interaction between the two coupled nuclei and is independent of which nucleus is being observed.

Therefore, we would expect the J-value of proton B to also be 3.0 Hz.

To learn more about the J-value constant:

https://brainly.com/question/21659935

#SPJ4

The type of polyester that is formed in the reaction between glycerol and phthalic anhydride is known as glycerol phthalate or glyceryl phthalate.

It is a type of thermoplastic polyester that is often used in the production of films, coatings, and adhesives due to its high solubility in many organic solvents. Glycerol phthalate is also commonly used in the pharmaceutical industry as a plasticizer for enteric coatings on oral medications to protect them from the acidic environment of the stomach.

Glycerol phthalate, also known as glyceryl phthalate or glycerol phthalic acid ester, is a type of thermoplastic polyester that is formed by the reaction between glycerol and phthalic anhydride. It is a colorless to pale yellow solid that is soluble in many organic solvents such as acetone, methanol, and chloroform.

Learn more about polyester here:

https://brainly.com/question/11112056

#SPJ4

A solid that forms and settles out of a liquid mixture is called a precipitate.

The process of changing a dissolved component into an insoluble solid from a super-saturated solution is referred to as precipitation. This process takes place in an aqueous solution. The name given to the solid that forms is precipitate. In the event that an inorganic chemical reaction results in precipitation, the chemical reagent that is responsible for the formation of the solid is referred to as the precipitant. To precipitate in chemistry means to generate an insoluble compound, which can occur either through the reaction of two salts or through a change in temperature that affects the solubility of the compound.

To learn more about precipitate, click here:

https://brainly.com/question/24846690

#SPJ4

If water molecules did not have a slight negative charge on one end and a slight positive charge on the other then Water would be incapable of freezing or boiling.

Water is an inorganic polar chemical. At room temperature, it is an odorless and tasteless liquid with a tinge of blue. This most basic hydrogen chalcogenide is unquestionably the most researched chemical compound and therefore is known as that of the "universal solvent" due to its propensity to dissolve a wide range of compounds.

If water molecules did not have a slight negative charge on one end and a slight positive charge on the other then Water would be incapable of freezing or boiling.

Therefore, water would be incapable of freezing or boiling.

To learn more about water, here:

https://brainly.com/question/16630851

#SPJ9

The BrF₃ molecular geometry is the T-shaped or the Trigonal Bipyramidal .

The BrF₃ has the molecular geometry that is said to be the T-shaped or the Trigonal Bipyramidal with the bond angle of the 86.2° which is the slightly smaller than the usual of 90°.This angle formed because of the repulsion that is generated by the lone pair of the electrons which is the greater than that of the Br-F bonds.

The hybridization of the BrF₃ molecule is the sp³d hybridization type . It is the example of the AX5 type of the molecule because it has the two lone pairs and the three bonded pairs of the electrons.

To learn more about molecular geometry here

https://brainly.com/question/30185738

#SPJ4

The temperature of the 45.0 g piece of metal changed from 241 °C to 32.0 °C. is 0.48 j/ 9°C.

Temperature is a measure of the average kinetic energy of the atoms or molecules in the system. The zeroth law of thermodynamics says that no heat is transferred between two objects in thermal equilibrium; therefore, they are the same temperature.

In other words, Temperature is the measure of hotness or coldness of a body measured using Celsius, Kelvin, and Fahrenheit scales. The change in temperature is based on the amount of heat released or absorbed. The S.I unit of temperature is Kelvin. The Temperature formula is given by, Δ T = Q / mc.

To know more about equilibrium visit

https://brainly.com/question/30694482

#SPJ1