Answer:
See explanation below
Explanation:
Since question 3 is not here, I will answer based on a general perspective.
The dosage of most antibiotics and drugs generally are prescribed without considering the weight of adults. Unlike children that are given dosages based on their weight.
The weight of adults is not considered because the extent to which they weigh is majorly as a result of their adipose (fat) tissue. And the adipose tissue does not determine the tolerance level of drugs. So an adult weighing 200kg and another weighing 50kg will be able to tolerate the same dosage of medications.
Because the adults are adults with fully developed organs, their weight does not matter when prescriptions are made.
The Lewis dot notation for two atoms is shown.
Mg is written with two dots on its right. O is written on the right of Mg. There are six dots around O. Two arrows point from the dots near Mg to O.
What is represented by this notation?
Mg gains two protons from O.
Mg donates two protons to O.
Mg gains two electrons from O.
Mg donates two electrons to O.
Answer:
Mg donates two electrons to O
Explanation:
Lewis dot notation uses dots and crosses to represent valence electrons on atoms.
Magnesium is a metal and would donate or lose electrons during bonding.
Oxygen is a non metal and would gain electrons during bonding.
The correct option is;
Mg donates two electrons to O
issues guidelines for financial system operated by all commerical banks in India
All of the following are characteristics of matter except
A.matter can disappear and reappear
B.matter has mass
C.matter occupies space
D.all things are composed of matter
Write the equilibrium expression of each chemical equation.
2H2S(g) 2H2(g) + S2(g)
Answer:
[H2]2[S2][H2S]2Kc=[H2]2[S2][H2S]2
Explanation:
2H2S(g)⇋2H2(g)+S2(g)2H2S(g)⇋2H2(g)+S2(g)
The equilibrium constant expression in terms of concentrations is:
Kc=[H2]2[S2][H2S]2Kc=[H2]2[S2][H2S]2.
The equilibrium expression for the given reaction can be written in terms of equilibrium constant which is the ratio of power of molar concentration of the product to the product of power of molar concentration of the reactants.
What is equilibrium?Equilibrium is a state for a reversible reaction where, the rate of forward reaction is equal to the rate of backward reaction. The rate of a reaction is the rate of decrease in the concentration of reactants or the rate of increase in the concentration of the products.
The given reaction at equilibrium state is written as:
[tex]\rm 2H_{2}S (g)\leftrightharpoons 2H_{2} (g)+ S_{2}(g)[/tex]
The equilibrium constant Kb is ratio of power of molar concentration of the product to the product of power of molar concentration of the reactants.
[tex]Kb = \rm \frac{[H_{2}S]^{2}}{[H_{2}]^{2} [S_{2}]}[/tex]
The rate of the reaction will be r = Kb [H₂]² [S₂].
To find more on equilibrium constant, refer here:
https://brainly.com/question/15118952
#SPJ2
The figure shows different possible transitions of electrons as they move from higher energy states to lower energy states. Which transition will produce the spectrum line with the lowest wavelength in this element’s atomic spectrum?
A. A
B. B
C. C
D. D
Answer:
It is D !!
Explanation:
Just did test
How many particles are in 67.9 grams of water (H2O)?
Answer:
3.769022740695677
Explanation:
Answer:We get 1.81×1024 water molecules... Explanation: We assess the molar quantity of water in the usual way... Number of moles=massmolar mass.
brainliest plz
What is a property of a moving object that makes it hard to stop?
Western art criticism unique in that
Answer:
they are a lot tougher and are expecting only greatness, sort of like theater critiques.
Explanation:
Predict the missing product of this equation
1 MgF2 + 1 Li2CO3 -> 1 ______ +2LiF
Answer:
MgCO₃
Explanation:
From the question given above, we obtained:
MgF₂ + Li₂CO₃ —> __ + 2LiF
The missing part of the equation can be obtained by writing the ionic equation for the reaction between MgF₂ and Li₂CO₃. This is illustrated below:
MgF₂ (aq) —> Mg²⁺ + 2F¯
Li₂CO₃ (aq) —> 2Li⁺ + CO₃²¯
MgF₂ + Li₂CO₃ —>
Mg²⁺ + 2F¯ + 2Li⁺ + CO₃²¯ —> Mg²⁺CO₃²¯ + 2Li⁺F¯
MgF₂ + Li₂CO₃ —> MgCO₃ + 2LiF
Now, we share compare the above equation with the one given in the question above to obtain the missing part. This is illustrated below:
MgF₂ + Li₂CO₃ —> __ + 2LiF
MgF₂ + Li₂CO₃ —> MgCO₃ + 2LiF
Therefore, the missing part of the equation is MgCO₃
Why was d-day and the battle of France so important to American and the allies
Answer:
The Importance of D-Day
The D-Day invasion is significant in history for the role it played in World War II. It marked the turn of the tide for the control maintained by Nazi Germany; less than a year after the invasion, the Allies formally accepted Nazi Germany's surrender.
How do you balance this equation?
Answer:
HC₂H₃O₂ + NaHCO₃ —> NaC₂H₃O₂ + CO₂ + H₂O
The coefficients are: 1, 1, 1, 1, 1
Explanation:
_HC₂H₃O₂ + _NaHCO₃ —> _NaC₂H₃O₂ + _CO₂ + _H₂O
To balance an equation, we simply do a head count of the individual elements and ensure they are balanced on both side.
For the above equation, we shall balance it as :
HC₂H₃O₂ + NaHCO₃ —> NaC₂H₃O₂ + CO₂ + H₂O
Reactant:
H = 5
C = 3
O = 5
Na = 1
Product:
H = 5
C = 3
O = 5
Na = 1
From the above, we can see that each element is the same on both side of the equation. Thus the equation is already balanced
HC₂H₃O₂ + NaHCO₃ —> NaC₂H₃O₂ + CO₂ + H₂O
The coefficients are: 1, 1, 1, 1, 1
Final volume of Argon gas:
6. Volume-Volume Problem: If water vapor is added to Magnesium Nitride, ammonia gas is produced
when the mixture is heated, according to the following reaction:
Mg3N2 (s) +
H2O (g)—->
Mgo (s) +
NH3 (g)
If 10.2 mL of water reacts with magnesium nitride, what volume (in Liters) of Ammonia gas will form at
STP?
Answer:
6.78 × 10⁻³ L
Explanation:
Step 1: Write the balanced equation
Mg₃N₂(s) + 3 H₂O(g) ⇒ 3 MgO(s) + 2 NH₃(g)
Step 2: Calculate the moles corresponding to 10.2 mL (0.0102 L) of H₂O(g)
At STP, 1 mole of H₂O(g) has a volume of 22.4 L.
0.0102 L × 1 mol/22.4 L = 4.55 × 10⁻⁴ mol
Step 3: Calculate the moles of NH₃(g) formed from 4.55 × 10⁻⁴ moles of H₂O(g)
The molar ratio of H₂O to NH₃ is 3:2. The moles of NH₃ produced are 2/3 × 4.55 × 10⁻⁴ mol = 3.03 × 10⁻⁴ mol.
Step 4: Calculate the volume corresponding to 3.03 × 10⁻⁴ moles of NH₃
At STP, 1 mole of NH₃(g) has a volume of 22.4 L.
3.03 × 10⁻⁴ mol × 22.4 L/mol = 6.78 × 10⁻³ L
What do you call the new material that are created in chemical
In an experiment, a student places a small piece of pure Mg(s) into a beaker containing 250.mL of 6.44MHCl(aq) . A reaction occurs, as represented by the equation above.
The student collects the H2(g) produced by the reaction and measures its volume over water at 298 K after carefully equalizing the water levels inside and outside the gas-collection tube. The volume is measured to be 45.6mL . The atmospheric pressure in the lab is measured as 765 torr , and the equilibrium vapor pressure of water at 298 K is 24 torr
(ii) The number of moles of H2(g) produced in the reaction
Answer:
0.81 moles H2
Explanation:
The equation of the reaction is;
Mg(s) + 2HCl(aq) ------>MgCl2(aq) + H2(g)
Number of moles of HCl reacted = concentration * volume
Number of moles of HCl reacted = 6.44 * 250/1000
Number of moles of HCl reacted = 1.61 moles of HCl
If 2 moles of HCl produces 1 mole of H2
1.61 moles of HCl produces 1.61 * 1/2 = 0.81 moles H2
A formula unit made with Na and unknown nonmetal "Z" has the formula, NaZ. Which element does "Z" represent?
Which of the following is considered a complex (Macro)molecule?
Glucose
DNA
Carbon dioxide
Answer:
it is Glucose hope it helps
Answer:
Glucose and DNA
Explanation:
Complex macromolecules are the combination of more than two molecules which are large and complex. The major types of complex macromolecules consists of 4 types which are carbohydrates, lipids, proteins, and nucleic acids.
Glucose is one of the carbohydrates, while DNA is another form of nuclei acid.
SOMEONE PLEASE HELP MEEE!!!!
What is the mass in grams of 6.25 mol of copper (II) nitrate ,Cu(NO3)2?
Answer:
lol
Explanation:
lol
what does GCAT help us remember?
i am having trouble solving it pls help
Answer:
1. 0.097 s
2. 0.420 M
Explanation:
To solve both questions we'll use the formula:
[A]ₓ = [A]₀ - kt
Where [A]ₓ is the concentration of A at a given time; and [A]₀ is the initial concentration.
1) We input the data given by the problem:
0.167 M = 0.700 M - 5.48 M/s * t
And solve for t:
t = 0.097 s
2) We input the new data:
[A]ₓ = 0.500 M - 0.361 M/s * 0.220 s
and solve for [A]ₓ:
[A]ₓ = 0.420 M
Aqueous hydrogen fluoride (hydrofluoric acid) is used to etch glass and to analyze minerals for their silicon content. Hydrogen fluoride will also react with sand (silicon dioxide). (a) Write an equation for the reaction of solid silicon dioxide with hydrofluoric acid to yield gaseous silicon tetrafluoride and liquid water. (b) The mineral fluorite (calcium fluoride) occurs extensively in Illinois. Solid calcium fluoride can also be prepared by the reaction of aqueous solutions of calcium chloride and sodium fluoride, yielding aqueous sodium chloride as the other product. Write complete and net ionic equations for this reaction.
Answer:
See explanation
Explanation:
The balanced reaction equation of the reaction between SiO2 and HF is shown below;
SiO2(s) + 4HF(aq) = SiF4(g) + 2H2O(l)
b)
2NaF(aq) + CaCl2(aq) --------> 2NaCl(aq) + CaF2(s)
The complete ionic equation is;
2 Na^+(aq) + 2F^-(aq) + Ca^+(aq) + 2 Cl^-(aq)------> 2 Na^+(aq) + 2 Cl^-(aq) + CaF2(s)
The net ionic equation;
Ca^+(aq) + 2F^-(aq) -------> CaF2(s)
Some antacid tables contain aluminum hydroxide. The aluminum hydroxide reacts with stomach acid according to the equation: Al(OH)3 + 3HCl →AlCl3 + 3H2O. Determine the moles of stomach acid (HCl) required if a tablet contains 8.89 moles of Al(OH)3.
Answer:
26.67 mol HCl
Explanation:
Al(OH)₃ + 3HCl → AlCl₃ + 3H₂O
In order to solve this problem, we need to convert Al(OH)₃ moles to HCl moles.
To do so we use the stoichiometric ratios of the balanced reaction:
8.89 mol Al(OH)₃ * [tex]\frac{3molHCl}{1molAl(OH)_{3}}[/tex] = 26.67 mol HClThus 26.67 moles of HCl would react completely with 8.89 moles of Al(OH)₃.
What is true about the inertia of two cars, Car A of mass 1,500 kilograms and Car B of mass 2,000 kilograms?
OA.
Car A and Car Bhave the same inertia.
B.
Car A has more inertia than Car B.
Oc.
Car Bhas more inertia than Car A.
ОО
D.
Both the cars have negligible inertia.
I’m
Answer:
Car B has more inertia than Car A
Explanation:
Given that,
Mass of car A = 1500 kg
Mass of car B = 2000 kg
Inertia is directly proportional to the mass of an object. Inertia is the measure of the mass of an object.
In this case, the mass of car B is more than that of car A, it means the inertia of car B is more than that of car A.
Hence, the correct option is (c) "Car B has more inertia than Car A".
is calcium hydroxide an ionic compound, covalent compound, or acid?
Answer:
Calcium Hydroxide is an ionic compound
A beaker in your laboratory drawer has an inside diameter of 6.8 cm and a height of 8.9 cm. Using the equation V= arh, calculate the volume of the beaker, expressed in milliliters.
Answer:
323.22 ml
Explanation:
Given that :
Diameter, d = 6.8cm
Height, h = 8.9cm
V = arh
Recall :
Volume, V = πr²h
Radius, r = diameter / 2 = 6.8 / 2 = 3.4cm
V = π * 3.4^2 * 8.9
V = 323.21961 cm³
Recall:
1ml = 1cm³
Hence,
323.21961 cm³ = 323.21961 ml
Volume = 323.22 ml
how many moles of aluminum are needed to produce 0.418 mol of Al2(SO4)3? 2 Al(s) + 3 H2SO4(aq) → Al2(SO4)3(aq) + 3 H2(g)
0.836 mol Al
General Formulas and Concepts:Math
Pre-Algebra
Order of Operations: BPEMDAS
Brackets Parenthesis Exponents Multiplication Division Addition Subtraction Left to RightChemistry
Stoichiometry
Using Dimensional AnalysisReactions RxNExplanation:Step 1: Define
[RxN - Balanced] 2Al (s) + 3H₂SO₄ (aq) → Al₂(SO₄)₃ (aq) + 3H₂ (g)
[Given] 0.418 mol Al₂(SO₄)₃
[Solve] x mol Al
Step 2: Identify Conversions
[RxN] 2 mol Al (s) → 1 mol Al₂(SO₄)₃ (aq)
Step 3: Stoich
[DA] Set up: [tex]\displaystyle 0.418 \ mol \ Al_2(SO_4)_3(\frac{2 \ mol \ Al}{1 \ mol \ Al_2(SO_4)_3})[/tex][DA] Multiply/Divide [Cancel out units]: [tex]\displaystyle 0.836 \ mol \ Al[/tex]Step 4: Check
Follow sig fig rules and round. We are given 3 sig figs.
Since our final answer already has 3 sig figs, there is no need to round.
Volume is the independent or dependent variable
Answer:
Independent
Explanation:
Independent Variable is the volume of the object. Dependent Variable is the mass of the object. So it
The lattice energy of a salt is 350 kJ/mol and the solvation energies of its ions add up to 320 kJ/mol for the preparation of a 0.50 M solution. In the preparation of this solution would the solution get colder or warmer
Answer:
It would get colder
Explanation:
The lattice energy is the energy involved in the disruption of interactions between the ions of the salt. In this case, we have: ΔHlat = 350 kJ/mol > 0, so it is an endothermic process (the energy is absorbed).
The solvation energy is the energy involved in forming interactions between water molecules and the ions of the salt. In this case, we have: ΔHsolv = 320 kJ/mol > 0, so it is an endothermic process (the energy is absorbed).
The dissolution process involve both processes: the disruption of ion-ion interactions of the salt and the solvation process. Thus, the enthalphy change (ΔHsol) in the preparation of the solution is calculated as the addition of the lattice energy and solvation energy:
ΔHsol= ΔHlat + ΔHsolv = 350 kJ/mol + 320 kJ/mol = 370 kJ/mol
370 kJ/mol > 0 ⇒ endothermic process
Since the preparation of the solution is an endothermic process, it will absorb energy from the surroundings, so the solution would get colder.
f) How many neutrons are there in the nucleus of arsenic?
1. Neodymium
2. Selenium
3. Strontium
Explanation:
How many neutrons are there in the nucleus of arsenic?42 neutrons
The nucleus consists of 33 protons (red) and 42 neutrons (blue).
What amount of heat (in kJ) is required to convert 14.0 g of an unknown liquid (MM = 67.44 g/mol) at 43.5 °C to a gas at 128.2 °C? (specific heat capacity of liquid = 1.18 J/g･°C; specific heat capacity of gas = 0.792 J/g･°C; ∆Hvap = 30.1 kJ/mol; normal boiling point, Tb = 97.4°C)
Answer:
1.24 kJ is required to convert 14 g of liquid from 43.5°C to 128.2°C
Explanation:
This is a typical calorimetry problem:
We have to assume, no heat is lost to sourrounding.
First of all, we need to go from 43.5°C to 97.4°C, the boiling point.
Q = Ce . m . ΔT
We replace data, 1.18° J/g . 14 g . (97.4°C - 43.5°C)
Heat for the first stage is: 890.4 Joules
Now we have to change the state, and we need the ΔH. As we do not have latent heat, we can proceed like this:
1 mol release 30.1 kJ at vaporization.
We convert the mass to moles → 14 g. 1mol/ 67.44g = 0.207 mol
0.207 mol will release (0.207 . 30.1 kJ) = 6.25 kJ
Now, we are at gaseous phase.
Q = Ce . m . ΔT → 0.792 J/g°C . 14g . (128.2°C - 97.4°C)
Q = 341.5 Joules
To determine the amount of heat, we sum all the obtained values:
890.4 Joules + 6250 Joules + 341.5 Joules = 1238.2 J
We convert to kJ → 1238.2 J . 1kJ / 1000J = 1.24 kJ
The heat required to convert 14.0 g of an unknown liquid at 43.5 °C to gas at 128.2 °C is 7.48 kJ.
We want to calculate the heat required to convert 14.0 g of an unknown liquid at 43.5 °C to gas at 128.2 °C.
We can divide this process in 3 steps.
Heating of the liquid from 43.5 °C to 97.4 °C (normal boiling point).Vaporization of the liquid at 97.4 °C.Heating of the gas from 97.4 °C to 128.2 °C.1. Heating of the liquid from 43.5 °C to 97.4 °CWe will calculate the heat for this step (Q₁) using the following expression.
Q₁ = c(l) × m × ΔT
Q₁ = (1.18 J/g･°C) × 14.0 g × (97.4 °C - 43.5 °C) = 890 J = 0.890 kJ
where,
c(l) is the specific heat capacity of the liquid.m is the mass of the substance.ΔT is the change in the temperature.2. Vaporization of the liquid at 97.4 °C.We will calculate the heat for this step (Q₂) using the following expression.
Q₂ = (m/M) × ΔHvap
Q₂ = [14.0 g/(67.44 g/mol)] × 30.1 kJ/mol = 6.25 kJ
where,
m is the mass of the substance.M is the molar mass of the substance.ΔHvap is the enthalpy of vaporization of the substance.3. Heating of the gas from 97.4 °C to 128.2 °C.We will calculate the heat for this step (Q₃) using the following expression.
Q₃ = c(g) × m × ΔT
Q₃ = (0.792 J/g･°C) × 14.0 g × (128.2 °C - 97.4 °C) = 342 J = 0.342 kJ
where,
c(g) is the specific heat capacity of the gas.m is the mass of the substance.ΔT is the change in the temperature.4. Total amount of heat required (Q)Q = Q₁ + Q₂ + Q₃ = 0.890 kJ + 6.25 kJ + 0.342 kJ = 7.48 kJ
The heat required to convert 14.0 g of an unknown liquid at 43.5 °C to gas at 128.2 °C is 7.48 kJ.
Learn more about heating curves here: https://brainly.com/question/10481356
PLEASE HELPPPPPPPPPP
Answer:
Explanation
I am sorry but please give detailed question