below is a world map with the boundaries of lithospheric plates outlined. please use this map to indicate exactly which type of plate boundary lies between each pair of lithospheric plates listed below.

Answers

Answer 1

The map above shows the names and generalized locations of Earth's major tectonic plates.These plates move and interact with each other to produce earthquakes.

At divergent boundaries,lithospheric plates pull apart and crust is created. At convergent boundaries, lithospheric plates move together at collision zones where the crust is destroyed by subduction or uplifted to form mountain ranges.Most seismic activity occurs at three types of plate boundaries divergent,convergent, and transform.There are three types of tectonic plate boundaries divergent, convergent,and transform plate boundaries.Image courtesy of the US Geological Survey A tectonic plate, also called a lithospheric plate,is a massive, irregularly shaped slab of solid rock,usually composed of both continental and oceanic lithosphere.

To learn more about lithospheric plates please click on below link.

https://brainly.com/question/13446295.

#SPJ4


Related Questions

Can rock be weathered when water freezes?

Answers

When water freezes, it expands. The ice then works as a wedge. It slowly widens the cracks and splits the rock
Brainliest please
Answer: Yes because if water gets in the cracks then the water freezes it will expand and it can break the rock.

On an even smaller scale-such as a single urban city in a river basin-you can see how human activity has affected the water cycle. The illustration on the left is an example of how water flows when there is urban development in a river basin; the ilustration on the right is an example of how water flows in an intact forested area of a river basin. Compare the two diagrams carefully before answering the following question. 25% Transpiration 40% Transpiration 6096 Runoff 10% Runoff 10% shallow infiltration 20% shallow infiltration 590 Deep infiltration 30% Deep infiltration Urban development generally disrupts the natural flow of water in a river basin. Given the information in the illustrations, which of the following are true Check all that apply. a. Unsaturated forested ground cover will likely cause runoff to increase by 50 percentage points compared with impermeable surfaces such as concrete on city sidewalks. b. The higher abundance of vegetation in intact forested areas will increase uptake of water from the soil. This will result in less water in the shallow soil layers compared with developed urban areas. c. Groundwater used to fill underground aquifers will decrease by 25 percentage points in developed urban areas compared with natural forested areas.

Answers

Statements B and C are true based on the data presented in the examples. A is a false statement. In intact forested areas, more water is absorbed by the soil through deep infiltration, resulting in less runoff than in urban areas, as shown in the figure to the right.

In actuality, the figure on the left demonstrates how impermeable surfaces like concrete can heighten runoff, while the illustration on the right demonstrates how an unsaturated ground cover of trees can heighten deep penetration and lessen runoff.

The greater amount of flora in unaltered forested regions will boost the soil's ability to absorb water. In comparison to established urban areas, this will lead to less water in the shallow soil layers. As compared to naturally wooded areas, groundwater used to recharge subterranean aquifers will decline by 25% in developed metropolitan areas.

To learn more about infiltration here:

brainly.com/question/14241380

#SPJ4

The president is able to check the power of Congress by

Answers

Answer: by revieweing acts passed by Congress and blocking measures he may deem unconstitutional.

How does the understanding of the earth help to locate natural resources

Answers

Understanding geography and marking where things are crucial for example gold can mainly be found in Africa

Answer: Knowing geography and indicating where things are important

Explanation:

You have superhuman strength, and are swimming from Myrtle Beach, South Carolina out towards the middle of the Atlantic Ocean. Which list below correctly describes the order of features you would swim over? O shelf, slope, rise, abyssal plain. O slope, rise, shelf, abyssal plain. O rise, abyssal plain, slope, shelf.O abyssal plain, shelf, slope, rise. O abyssal plain, rise, slope, shelf.

Answers

You have superhuman strength, and are swimming from Myrtle Beach, South Carolina out towards the middle of the Atlantic Ocean shelf, slope, rise, abyssal plain correctly describes the order of features you would swim over.

The topography of the ocean floor begins with the continental shields, which extend to a depth of 200 meters, followed by the continental slopes, which extend to a depth of 2000 to 3000 meters, the continental rise, which extends to a depth of 4000 meters, the abyssal plains, which extend to a depth of 6000 meters, and the oceanic trenches, which extend to a depth of approximately 10,000 meters.

Between the continental slope and the abyssal plain, a thick deposit of sediments is known as the continental rise. Sediment typically accumulates in the abyssal plain. More than half of Earth's water surface was covered by an abyssal plain. It is an underwater plain about 3000 to 6000 meters below the surface of the deep ocean.

Learn about abyssal plain

https://brainly.com/question/1101557

#SPJ4

rank the following in order of how a rock responds to progressively increasing stress. start at the top with the behavior of rock with very little stress applied to it.

Answers

A rock responds to progressively increasing stress are:

- The rock does not change in any way. 

- The rock does not transform in any way. 

- When stress exceeds rock strength, the rock begins to distort.

- Rock collapses structurally in one of three ways: bending, cracking, or flowing as a flexible solid.

What is Rock?

The rock, according to geology, is a part of the solid surfaces. The rock is the collection of these cemented mineral grains. The rocks are small and bigger. The small rocks are also known as pebbles. The type of natural resource is rock.

According to the rock responds to increasingly changing stress are:

It was not to the change at all on rock.Rock acts elastically but stays unreformed. The stress of the rock are the bigger than intensity of rock, In the correct deformationThe last is rock neglects structurally.

As a result, the significance of the rock are the aforementioned.

Learn more about on rock, here:

https://brainly.com/question/19930528

#SPJ1

Need help on this word search

Answers

The search on the hidden word is the game activity. It was the search the word on the box are:

Enlightenment: second line eight word was the stated.

What is a hidden word?

The term hidden words refers to based on the search those words are the mixing on the letter box. It was the hidden in the main theme was the related. The hidden is the game activity.

According to the search on the hidden word are the interesting game activity was the related to the ancient India. The most of the word are the already search it as the find the "Enlightenment" is the based on the second line eight word was the stated.

As a result, the significance of the hidden words are the aforementioned.

Learn more about on hidden words, here:

https://brainly.com/question/25813601

#SPJ1

which of the following best describes a set of conditions under which archaeoastronomers would conclude that an ancient structure was used for astronomical purposes?

Answers

Archaeoastronomers would conclude that an ancient structure was used for astronomical purposes - When they look out from the building's core, they see two windows that line up with the rising and setting points of two prominent stars.

Which of the following best sums up the attitude of contemporary astronomers toward astrology?

Although astrology was crucial to the early development of astronomy, by modern definitions it is not a science.

Which of the following statements best encapsulates what an astronomical unit (AU) is?

the average, or mean, distance between Earth and the Sun, which is 149,597,870.7 km, is known as an astronomical unit (AU, or au) (92,955,807.3 miles).

It can also be thought of as the length of the semimajor axis, or the length equal to half of the maximum diameter, of Earth's elliptical orbit around the Sun. The astronomical unit offers a practical means to express and link solar system object distances as well as perform different astronomical calculations. The distances of these three bodies can be easily compared, for instance, by stating that Pluto is almost 40 AU from the Sun and that Jupiter is 5.2 AU (5.2 Earth miles) from the Sun.

To know more about archaeoastronomers visit:

https://brainly.com/question/14569626

#SPJ1

which of the following is an accurate interpretation of the properties of the outer core and mantle based on p-wave behavior?

Answers



The correct interpretation of the properties of the outer core and mantle based on p-wave behavior is that p-waves travel faster through the mantle than the outer core. This is because the mantle is made up of solid rock, which is denser and more rigid than the liquid outer core. This means that p-waves can travel through the mantle more quickly than they can through the outer core.

Which answer choice describes two CENTRAL ideas in the article?
1. In modern America, we have access to clean, fresh water every day.
2. On average, each person here receives less than 35,315 cubic feet of water a year. 3. Access to fresh water is also important for economic development.
4. Conflicts over water resources are common throughout the world.
(A) 1 and 2
(B) 1 and 3
(C) 2 and 4
(D) 3 and 4​

Answers

The two CENTRAL ideas in the article are:

3. Access to fresh water is also important for economic development.

4. Conflicts over water resources are common throughout the world.

What is the central idea?

Option 3 is a central idea in the article as it discusses the importance of water for economic development. The article argues that water is a critical resource for various industries, and adequate access to water is necessary for economic growth and development.

Option 4 is another central idea in the article. The article discusses the challenges and conflicts that arise due to the limited availability of water resources. The article provides examples of conflicts over water resources in different parts of the world, highlighting the importance of sustainable and equitable water management.

Therefore, the answer is (D) 3 and 4, as they are the two central ideas in the article.

Learn more about central idea here:https://brainly.com/question/1914191

#SPJ1

A stream of 130 l/s was diverted from a canal and 100 l/s were delivered to the field. An area of 1.6 ha was irrigated in 8 hrs. The effective root zone was 1.7 m. The runoff loss in the field was 420 m³, the depth of water penetration varied lineally from 1.7 m at the head end of the field to 1.1 at the tail end. Available moisture holding capacity of the soil is 20 cm per meter depth of soil. Irrigation was started at a moisture extraction level of 50% of the available moisture. It is required to determine the: a)Water conveyance efficiency b)Water application efficiency c)Water distribution efficiency​

Answers

It is required to determine the water conveyance efficiency, water application efficiency, and water distribution efficiency.

What is water conveyance efficiency?

Water conveyance efficiency is the ratio of water delivered to the irrigated land to the quantity of water delivered to the canal system from the river or reservoir.

With the help of the following formula, we can determine:

Water conveyance efficiency = (Water delivered to the field / Water diverted from the canal) x 100%Water application efficiency = (Water stored in the root zone / Water applied to the field) x 100%Water distribution efficiency = (Water stored in the root zone / Water delivered to the field) x 100%

By putting the values and calculating we get, the water conveyance efficiency is 62.5%, the water application efficiency is 55.56%, and the water distribution efficiency is 0.065%.

Learn more about water conveyance efficiency, here:

https://brainly.com/question/13398204

#SPJ1

What is movement region location and place

Answers

Movement region refers to the movement of people from one place to another.

Location and place refers to where those people are moving from and to, overtime.

How to describe movement ?

The term "movement region" can have different meanings depending on the context in which it is used. However, generally speaking, a movement region is a geographical area that is characterized by the movement of people, goods, or ideas.

The location of a movement region refers to its specific place on the map, while the place refers to the physical and cultural characteristics of the area, such as its landscape, climate, and the presence of particular groups of people or cultural practices.

Find out more on location at https://brainly.com/question/5972

#SPJ1

Which of the following describes the position of critics of bioengineering and GMOs?

GM crops are not necessary because organic pesticides were manufactured to control a wide variety of insects to protect agricultural crops and do not harm people or the environment when used properly.


GM seeds reduce the need to use pesticides and thus are safe for humans and the environment, but the increased use of herbicides affects the groundwater.


The chemicals in GM seeds compromise soil quality and are associated with increased disease susceptibility in crops, ultimately leading to increased use of pesticides.


GMOs are not necessary because washing food prior to eating it removes all traces of chemicals.


Productivity of eggplant crops in Bangladesh decreased dramatically when farmers used GM seeds and did not spray the crop with chemical pesticides before harvest.

Answers

The chemicals in GM seeds compromise soil quality and are associated with increased disease susceptibility in crops, ultimately leading to increased use of pesticides.

What are pesticides?

Pest control agents are compounds known as pesticides. Insecticide, nematicide, molluscicide, piscicide, avicide, rodenticide, bactericide, insecticide, animalic ide, microbicide, fungicide, and lampricide are some examples of these.

Herbicides are the most widely used of them, making for around 50% of all pesticide use worldwide.

The majority of pesticides are designed to act as plant protection agents, which often guard plants against weeds, fungi, or insects. For instance, the aquatic weed Salvinia is controlled by the fungus Alternaria solani.

A pesticide is, in general, a chemical or biological agent that hinders, renders ineffective, kills, or otherwise discourages pests.

Insects, plant pathogens, weeds, mollusks, birds, animals, fish, nematodes, and microbes that damage property, cause annoyance, spread disease, or act as disease vectors can all be considered target pests.

Learn more about pesticides, here

https://brainly.com/question/30295459

#SPJ1

What is the converse contrapositive and inverse of the conditional statement I go to the beach whenever it is a sunny summer?

Answers

"It is not a sunny summer day if I don't go to the beach," is a contrapositive.

Every time a nice summer day comes around, I visit the beach. converse: Every time I visit the beach, the weather is sunny and warm. If I don't go to the beach on a sunny summer day, the opposite is true. Inverse: Whenever it is not a sunny summer day, I avoid going to the beach.

We must first look at the subject of negation before defining the converse, contrapositive, and inverse of a conditional statement. In logic, every claim is either true or untrue. A statement can be negated by simply inserting the word "not" at the appropriate place in the statement.

LEARN MORE ABOUT SUNNY SUMMER

https://brainly.com/question/30480580

#SPJ4

TRUE/FALSE. Gravitational pull on a dense, down-going plate at a subduction zone (slab pull) is one of the forces that keeps the lithospheric plates moving.

Answers

The statement  Gravitational pull on a dense, down-going plate at a subduction zone (slab pull) is one of the forces that keep the lithospheric plates moving is true.

By means of gravity, a planet or other body pulls objects toward its center. All the planets are maintained in their orbits around the sun by the force of gravity.

When you jump up, why don't you just float off into space instead of landing on the ground? Why do objects fall to the ground when they are dropped or thrown? The answer is gravity, which is an invisible force that draws things together. You remain on the ground and things fall as a result of the Earth's gravity.

A demonstration of gravity in action. According to Albert Einstein, gravity is a space-bound curve that encircles an object, like a planet or a star. It is pulled if there is another object nearby.

To know more about Gravitational pull here

https://brainly.com/question/28854345

#SPJ4

Need help on this word search 10 pts

Answers

Answer:

Top go from left to the right, third letter, D, then diagonally to the bottom right.

Explanation:

Dharma

Name the stages of the water cycle.

precipitation

runoff

condensation

evaporation

groundwater

Answers

Answer:

here is the answer in the picture

Explanation:

I filled it out for you

The water cycle is a continuous process that describes the movement of water on, above, and below the Earth's surface. It consists of several stages that work together to maintain a constant supply of water on the planet.

The first stage of the water cycle is evaporation, where water from oceans, rivers, lakes, and other bodies of water is transformed into water vapor due to the heat of the sun. The second stage is condensation, where the water vapor rises into the atmosphere and cools, turning back into liquid water droplets that form clouds.

The third stage is precipitation, where the clouds release the water droplets in the form of rain, snow, sleet, or hail, which fall to the ground. The fourth stage is runoff, where the precipitation flows over the land, into streams, rivers, and oceans, replenishing the bodies of water that were the source of the evaporation in the first stage.

The fifth stage is infiltration, where some of the precipitation seeps into the ground and becomes groundwater. Groundwater is an important source of water for many communities, as it can be stored underground for long periods of time and accessed through wells or springs.

Overall, the water cycle is a crucial process that ensures the availability of water for all living organisms on the planet. It is impacted by human activities such as deforestation, pollution, and climate change, which can affect the amount and distribution of precipitation, and the availability of groundwater.

Learn more about  water cycle here

https://brainly.com/question/1698837

#SPJ5

FILL IN THE BLANK. Detrital sedimentary rocks are defined and named based mainly on their _______________, while chemical sedimentary rocks are defined mainly on their ____________.

Answers

Detrital sedimentary rocks are defined and named based mainly on their grain size, while chemical sedimentary rocks are defined mainly on their composition.

Sedimentary rocks are created by accumulation of existing rocks or fragments of extinct organisms on the Earth's surface. The detrital sedimentary rocks are classified according to their grain size. These can be further classified by their texture and composition, which gives clue on type of deposition from which these rocks were formed. The texture of these rocks is defined by various factors such as rock size, sorting and shape or roundness. While chemical sedimentary rocks are defined mainly on the basis of their chemical composition. These rocks are formed by precipitation of minerals from water such as evaporites, carbonate rocks etc.

To know more about "sedimentary rocks" visit-

brainly.com/question/10709497

#SPJ4

decide which region of the united states best matches the descriptions below. question 1 (1 point) large industries question 1 options: north south west

Answers

There are significant industries in every region of the United States, but historically the heavier sectors like steel, automobile production, and other industrial industries have been associated with the Northeast and the Midwest.

Therefore, the North is the area that most closely resembles the industries of "big industries." The five distinct geographic regions of North America are the Caribbean, the Great Plains, the Canadian Shield, the mountainous east, and the west. While the lowlands and coastal plains of Mexico and Central America reach into the eastern part of the continent, their western shore is connected to the west's mountainous region.

To know more about the industries click on the link

https://brainly.com/question/28495859

#SPJ4

which of the following geographic features most likely contributed to the lack of cultural consistency and political unity among the greek city-states?

Answers

The mountainous terrain of Greece's geographic features most likely contributed to the lack of cultural consistency and political unity among the greek city-states.

Greece is the most southerly country in Europe and has the longest coastline. Although the nation's mainland is home to rough mountains, forests, and lakes, thousands of islands dot the aquamarine Aegean Sea to the east, the Mediterranean Sea to the south, and the Ionian Sea to the west, making up the nation's most famous feature.

The Peloponnese, a peninsula south of the mainland, is included in the country's three geographical regions along with the mainland and the islands.

One of the world's deepest gorges, the 3,600-foot (1,100-meter) Vikos Gorge, can be found in the mainland Pindus mountain range. At 9,570 feet (2,917 meters) above sea level, Mount Olympus is the highest mountain in Greece. The gods' residence, according to ancient Greeks.

To learn more about the Greece Here

https://brainly.com/question/31810

#SPJ4

What geographic features most likely contributed to the lack of cultural consistency and political unity among the greek city-states?

Plate A and Plate B are both made of continental plate material where they touch. What will happen as the plates press together?answer choicesThe edges of both plates will be pushed upward as the plates continue to move toward each other and create a Mountain.The edges of both plates will be pushed downward as the plates continue to move toward each other.One plate will stop moving, and one plate will push upward as it continues to move toward the other plate.Both plates will stop moving.

Answers

The thing that will happen when two plates made of continental plate material press together is that the edges of both plates will be pushed upward as the plates continue to move toward each other and create a mountain.

Tectonic plates are crust parts of the earth and the uppermost mantle also called the lithosphere. There are two types of material in tectonic plates: oceanic crust and continental crust. Oceanic plate materials are mostly basalt (mafic igneous rocks) which is denser and heavier, while continental plate materials are mostly granitic rocks such as quartz and feldspar which is more lightweight.

There are seven major continental plates: African, Antarctic, Eurasian, Indo-Australian, North American, Pacific, and South American.

Learn more about tectonic plates at https://brainly.com/question/1162125

#SPJ4

precession describes the ____ of earth in relation to the farthest point in orbit from the sun.

Answers

Precession describes the slow change of the Earth in relation to the farthest point in orbit from the sun.

In astronomy, precession is the slow changes in an astronomical body's rotational or orbital parameters. There are two types of precession:

Axial precession: the wobble of the planet's rotation due to the gravitational influence of the Moon and Sun.Apsidal precession: the wobble of the planet's entire orbital ellipse due to the gravitational tug by Jupiter and Saturn.

In the case of the question above, seems like the type of precession that it referred to is the apsidal precession. Attached below is an illustration of the effect of apsidal precession on the seasons.

Learn more about precessions at https://brainly.com/question/4880418

#SPJ4

Imagine you are located at Point E and you are watching a tide gauge to determine changes in water level. As the bulge is approaching your location from the east, the water level is_____. High tide occurs when the center of the bulge is at your location. As the bulge continues westward, the change in observed water level reverses direction. a. falling b. rising c. steady

Answers

As the bulge is approaching your location from the east, the water level is steady. High tide occurs when the center of the bulge is at your location. As the bulge continues westward, the change in observed water level reverses direction.

What is water level?

A water level is a syphon that uses two or more components of the moving water surface to create a local horizontal line or plane of reference. It is used to determine the apparent inclination of a subject or surface as well as to match water level elevations at locations that are too far apart for a spirit level to span.

Water level, also known as gauge height or stage, is the elevation of a sea, stream, lake, or reservoir's pen surface in relation to a given vertical datum.

Know more about water level -

brainly.com/question/30377506

#SPJ1

Which of the following is the most convincing piece of evidence set forth to support the concept of sea floor spreading?
A) The correlation of rocks found in adjacent positions on matching continents.
B) The mid-ocean ridge is entirely volcanic in origin.
C) The mid-ocean ridge rises more than 2.5 kilometers above the surrounding deep-ocean floor.
D) The oceanic pattern of alternating reversals of Earth’s magnetic field.
E) None of the above

Answers

The most convincing piece of evidence set forth to support the concept of sea floor spreading is the oceanic pattern of alternating reversals of Earth's magnetic field, option D.  

As magma rises from the mantle and solidifies into rock at the mid-ocean ridge, it records the Earth's magnetic field at that time. Over time, the polarity of the Earth's magnetic field flips, resulting in a pattern of stripes on the ocean floor of rocks with normal and reversed polarity. This pattern has been observed on both sides of the mid-ocean ridge and is consistent with the idea that the ocean floor is spreading apart from the mid-ocean ridge. The correlation of rocks found in adjacent positions on matching continents (option A) and the fact that the mid-ocean ridge is entirely volcanic in origin (option B) are also consistent with the idea of sea floor spreading, but they are not as direct and compelling as the magnetic striping pattern. The fact that the mid-ocean ridge rises more than 2.5 kilometers above the surrounding deep-ocean floor (option C) is not directly related to sea floor spreading.

For more information on volcanic see:

https://brainly.com/question/30437501

#SPJ4

which ratio is used to measure how much solar radiation a surface absorbs compared to how much it reflects

Answers

The amount of energy that solar radiation transfers per square meter is measured in watts/m2. In general, the Body absorbs less than 0.5 = 10 −9 of the heat of its solar radiation from the Sun.

What does the term "radiation" mean?

The phenomena of waves radiating from a source—that is, moving outward in all directions—gives origin to the word radiation. This feature results in a set of physical units and measures that can be used for all kinds of radiation.

Ionizing radiation: What is it?

radiation with ions. Atoms can be ionized, which means that radiation with a high enough energy can dislodge electrons from them and produce ions. When an electrons is removed (or "managed to knock out") from an atom's electron shell, ionization takes place, leaving that atom with a positive charge.

To know more about radiation visit:

https://brainly.com/question/1462956

#SPJ1

When explaining city growth through the multiple nuclei model, geographers acknowledge that modern cities do not always follow strict patterns of growth because of __________.
A.
irrigation networks
B.
park spaces
C.
changes to modern transportation
D.
grid street layouts

Please select the best answer from the choices provided.

A
B
C
D

Answers

When explaining city growth through the multiple nuclei model, geographers acknowledge that modern cities do not always follow strict patterns of growth because of changes to modern transportation. Hence, option C is correct.

How has technology changed in transportation?

One method logistics may advance as a result of continued advancements in transportation technology is with connected vehicles and freight trucks. Data can be gathered to assist in resolving traffic and congestion issues along key thoroughfares and delivery routes as the number of IoT sensors in CCTV cameras along highways increases.

Air, water, and land transportation—which includes rails, roads, and off-road travel—are the many forms of transportation. There are additional modalities as well, such as pipelines, cable transmission, and space travel.

Thus, option C is correct.

For more information about technology changed in transportation, click here

https://brainly.com/question/4174505

#SPJ1

which of these statements best describes why seismic wave 2 reaches the seismometer before seismic wave 1

Answers

The correct answer is d) Seismic wave #1 traveled through very dense material, slowing its velocity.

Seismic waves travel through the Earth's interior at different velocities, depending on the density and composition of the material they encounter. Seismic wave #1, also known as the primary wave or P-wave, is a compressional wave that can travel through solid, liquid, and gas materials. As it travels through the Earth's interior, it encounters dense material, such as the mantle, which slows its velocity. In contrast, seismic wave #2, also known as the secondary wave or S-wave, is a transverse wave that can only travel through solid materials. Since it doesn't have to travel through as much dense material as the P-wave, it can move faster and reaches the seismometer before the P-wave. The time difference between the arrival of the P-wave and S-wave is used to determine the distance and location of the earthquake's epicenter.

Learn more about Seismic waves:

https://brainly.com/question/13056218

#SPJ4

The complete question is :

Which of these statements best describes why seismic wave #2 reaches the seismometer before seismic wave #1?

a) Seismic wave #2 refracted at the crust-mantle boundary due to the increase in density, allowing its velocity to increase

b) Seismic wave #2 had a more direct path to travel to the seismometer, allowing it to get there first

c) Seismic wave #1 was reflected while traveling through the crust, causing its velocity to slow

d) Seismic wave #1 traveled through very dense material, slowing its velocity

What did scientists discover at mid-ocean ridges?
A Continents still joined together
B Volcanic crust
C Different magnetic patterns
D None of these​

Answers

It will be B.) Volcanic crust

Each of arguments
(v)
through (vii) listed below is not valid as it stands. In each case, add one or more premises so that the argument becomes valid. (v) 1. Every event has a cause. 2. No event causes itself. 3. Thus: The universe has no beginning in time. [from 1,2] (vi) 1. It is illegal to keep a tiger as a pet in New York City. 2. Jones lives in New York City. 3. Thus: It would be wrong for Jones to keep a tiger as a pet. [from 1,2] (vii) 1. The sun has risen every day for the past 4 billion years. 2. Thus: The sun will rise tomorrow. [from 1]

Answers

We think that Sun will rise tomorrow because it is a human standard that the sun has risen every day for the last 4 billion years.

The Sun is everlasting as we know it. Every day it shines brightly as it crosses the sky, rising in the east every morning and setting in the west every evening. But the Sun is a star, and stars change constantly. Some of the changes happen over days, or even minutes, while others take decades, millions, or even billions of years.

About 4.6 billion years ago, a massive cloud of gas and dust gravitationally collapsed, giving birth to the Sun. The material in the cloud's center was compressed so firmly that it heated up to a temperature that could ignite nuclear fusion.

To learn more about the sun here

https://brainly.com/question/28293189

#SPJ4

07using this earthquake hazard map for the united states, determine which area in the list below has the highest earthquake hazard.

Answers

Washington coast has the highest earthquake hazard.

About earthquake

An earthquake is a vibration that occurs in the earth due to the movement of tectonic plates. Earthquakes can occur on the surface of the earth or inside the earth. When an earthquake occurs, the movement of tectonic plates can cause faults or cracks in the ground, which can result in landslides or damage to building structures. Earthquakes can also cause tsunamis if they occur at sea.

According to experts, an earthquake is a vibration that occurs in the earth due to the movement of tectonic plates. Earthquakes can occur on the surface of the earth or inside the earth and can cause damage to building structures and other natural disasters.

In addition, experts also state that earthquakes can occur suddenly and can have varying intensities, depending on factors such as the depth of the earthquake source, the type and condition of the tectonic plates, and the geological conditions in the affected area.

Learn more about earthquake at

https://brainly.com/question/29500066

#SPJ4

Other Questions
What is the stoichiometric ratio between the 20 mg band reactant and the product hydrogen gas in the reaction used to determine the molar volume of the gas? What is 20% off 250000 ? what is the movie did matthew mcconaughey say alright alright alright? What is the mass of adog that weighs 382 N?[?] kg Write the equation of the line that passes through the points (4, -3) and (8,5). Putyour answer in fully simplified point-slope form, unless it is a vertical or horizontalline. What were colonial committees of correspondence? Simplifyp-87-29-9The solution isWrite your answer using only positive exponents. island. Read and write (Yes) or (No). 1. Robinson's father wanted him to go to sea. 2. Robinson was from a poor family. 3. Robinson's first journey to sea was bad. 4. There were a lot of people on the island. Rigid rods of negligible mass lying along the y axis connect three particles. The system rotates about the x axis with an angular speed of 1.00 rad/s. It is known that m1 = 3.00 kg, m2 = 2.00 kg, m3 = 4.00 kg, and y1 = -4.00 m, y2 = -2.00 m, and y3 = 3.00 m.(a) Find the moment of inertia about the x axis.(b) Find the total rotational kinetic energy evaluated from 1/2 I2(c) Find the tangential speed of each particle. Choose the term that matches the following scenario: An anthropologist questions the elders of a South American Indian tribe about the religious beliefs. validity external data analysis sample research bias Consider the following equation.76y=385x Find the x- and y-intercepts, if possible. (T/F)Daguerreotype images were only classified by the impression they left on the observer rather than the literal images they conveyed. A 260-lb force is applied at A to the rolled-steel section shown. Replace that force with an equivalent force-couple system at the center of the section A. F= 260 lb, M=1210 lb in CCW; B. F= 260 lb, M=1210 lb.in CW; C. F= 260 lb, M=200 lb.in CW; D. F= 260 lb, M-200 lb.in CCW The marginal cost curve intersects the average total cost (ATC) curve:a. at the ATC curve's maximum point.b. only when the ATC curve is sloping downward.c. when the ATC curve intersects the fixed cost curve.d. at the ATC curve's minimum point.e. only when the ATC curve is sloping upward. is caco3 soluble in water How does Jona's community view those who doesn't want to follow the rule. What information in Marco Polos account above shows that the Great Khan put his complete trust in the barons? Analyze the linear inequalities and determine if the solution set is the shaded region above or below the boundaryline.Warm-Upy> -1.4x +7y> 3x-2y -x-42y < 3xy Industrialization:Question 2Which of the following were important inventions that cameout of the Industrial Revolution?Choose all that apply:The Cotton GinThe TelegraphThe TelephoneThe Sewing Machine the population of a school is 800 students and is increasing at a rate of 2%per year.