The velocity of the bag of feathers after falling for 3.5 seconds
is 34.3m/s.
The velocity of a falling object can be calculated using the following formula:
v = v_0 + g * t
where v_0 is the initial velocity (assumed to be zero for an object in free fall), g is the acceleration due to gravity (9.8 m/s^2), and t is the time elapsed.
The mass of the bag of feathers is not necessary for this calculation as the acceleration due to gravity is the same for all objects.
For the given case, after 3.5 seconds, the velocity of the bag of feathers can be calculated as follows:
v = 0 + 9.8 m/s^2 * 3.5 s
v = 34.3 m/s
To learn more about Velocity :
https://brainly.com/question/11313315
#SPJ4
how is positive feedback supplied in a colpitts oscillator?
In a Colpitts oscillator, positive feedback is supplied by the capacitive divider formed by two capacitors connected in series between the collector and the emitter of the transistor.
What is the capacitors ?A capacitor is an electrical component that consists of two conductive plates separated by an insulating material known as a dielectric. The capacitor stores electrical energy in the form of an electrostatic field between the two plates. When a potential difference is applied between the plates, it creates an electric field which can store energy.
The output of the oscillator (the collector voltage) is fed back to the base of the transistor via the capacitive divider. As the collector voltage increases, the voltage across the two capacitors increases, which increases the base current of the transistor, further increasing the collector voltage and thus providing positive feedback.
To learn more about capacitors
https://brainly.com/question/27753307
#SPJ4
the largest types of clouds found in interstellar space are
The largest types of clouds found in the interstellar space is called Molecular clouds. It mostly composed of molecular hydrogen and dust.
Molecular clouds are also known as dark nebula, which is massive interstellar clump or cloud. It is completely opaque due to the presence of dust and are usually visualized as dark patches between bright galaxies. These molecular clouds are the birth place of stars.
These clouds have higher density because of the higher number of hydrogen molecules per cubic centimeters. Some is said to have more than 10⁵ H₂ molecules per cm³. These clouds are so large, even individual clouds are bigger than stars, and the whole clump may be so large that there will be 150 light years to travel across.
So the largest clouds in interstellar space are molecular clouds.
For more information regarding molecular clouds, kindly refer
https://brainly.com/question/13838387
#SPJ4
When you speak, your voice sounds 10 dB louder to someone standing directly in front of you than to someone at the same distance but directly behind you. What is the ratio of the intensity of your voice for someone in front of you to the intensity for someone behind you?
The ratio of the intensity of voice for someone standing in front of the person to the intensity for someone standing behind is 10:1
What is intensity ?Intensity is a physical quantity that measures the amount of energy that flows through a given area per unit of time. In the context of sound waves, intensity refers to the amount of energy carried by sound waves per unit of time and per unit of area. It is related to the amplitude (or height) of the sound waves, which determines how much the pressure varies in the medium through which the waves travel. The unit of intensity is watts per square meter (W/m^2). The intensity of sound waves is important in many applications, such as in measuring the loudness of sounds, determining safe exposure levels to noise, and designing acoustic systems.
The difference in the sound level in decibels (dB) between two positions can be calculated using the following formula:
ΔL = 10 log10(I2/I1)
where ΔL is the difference in dB, I1 is the intensity at the first position, and I2 is the intensity at the second position.
In this case, the sound level is 10 dB higher is known for someone standing directly in front than for someone at the same distance but directly behind you. Using this information to set up the following equation:
10 dB = 10 log10(I_front/I_back)
where I_front is the intensity of voice for someone standing in front and I_back is the intensity of voice for someone standing behind
We can simplify this equation by dividing both sides by 10:
1 dB = log10(I_front/I_back)
Now, raise both sides of the equation to the power of 10:
10^1 = I_front/I_back
Simplifying this expression
I_front/I_back = 10
So the ratio of the intensity of your voice for someone standing in front of you to the intensity for someone standing behind you is 10:1. In other words, your voice is 10 times louder for someone standing directly in front of you than for someone at the same distance but directly behind you.
To know more about Intensity, visit:
https://brainly.com/question/17062836
#SPJ4
why do higher temperatures often result in greater precipitation
The higher temperatures often result in greater precipitation because warm air holds more water vapor.
A warmer planet means more precipitation will fall in regions of the world where water vapor is the factor that is currently limiting the amount of precipitation that occurs. This is the condition across a significant portion of the middle and upper latitudes across the Earth.
To put it simply, the amount of precipitation that falls is increasing as temperatures rise because warm air can carry more water vapor. A temperature increase of 1 degree Fahrenheit is equivalent to as much as a 4 percent increase in the amount of water vapor in the atmosphere. Other elements, such as El Nino and La Nina, may also play a role in the amount of rainfall.
To learn more about precipitation, click here:
https://brainly.com/question/18109776
#SPJ4
Mia is holding a 20 N weight without moving. How much work is she doing?
A.
B.
C.
D.
E.
F.
G.
H.
Answer:
झझकोर देने की कोशिश की है और यह बात उस समय की है जब कुंवर जी के लिए एक ही है कि वह इस बात को भी नहीं
If you are told that a 20 kilogram object is raised by 10 meters, you know that?
a. the force of gravity on the object is 20 kilograms.
b. the mass of the object is 20 kilograms
c. the force of gravity on the object is 10 meters.
d. the mass of the object is 10 meters.
e. the acceleration of the object is 200 kilogram-meters.
If you are told that a 20 kilogram object is raised by 10 meters then the mass of the object is 20 kilograms.
What is force of gravity?
Force of gravity is the attractive force between two objects that is due to their masses. It is what causes objects to fall to the ground when dropped and what keeps planets in their orbits. The strength of the gravitational force between two objects depends on their masses and the distance between them. The force of gravity is an inverse square law, meaning that if the distance between two objects is doubled, the force of gravity between them will be one-fourth of what it was originally.
The mass of an object is a measure of the amount of matter it contains and is not affected by changes in its position or location. Therefore, the mass of the object remains the same regardless of how high it is raised. In this case, the mass of the object is 20 kilograms.
Therefore, mass of the object is 20 kilograms is the correct answer.
To learn more about force of gravity from the link
https://brainly.com/question/13634821
#SPJ4
A man walking at 3. 56 m/s accelerates at 2. 50 m/s2 for 9. 28 s. How far does he get?.
The total distance traveled by the car when accelerating at a rate of 3. [tex]56 m/s^3[/tex] is 11.2 meters.
What is acceleration?Acceleration is the rate at which an object's velocity with respect to time changes. Acceleration is defined as a change in velocity over time. It is the pace at which the speed or direction of an item changes. It is determined using the formula a = (vf - vi)/t, where vf is the end velocity, vi is the beginning velocity, and t is the time period. Acceleration can be induced by a force such as gravity or by the motion of an item itself, such as when an automobile accelerates.
In the given question, the man will get a total distance of 40.1 meters.
This is calculated by using the equation d = v0t + 1/2[tex]at^{2}[/tex],
where v0 is the initial velocity (3.56 m/s), a is the acceleration (2.50 m/[tex]s^{2}[/tex]), and t is the time (9.28 s).
Plugging in these values, we get d = 3.56*9.28 + 0.5*2.50*[tex](9.28)^{2}[/tex] = 40.1 meters.
To know more about acceleration follow the link
brainly.com/question/29220990
#SPJ4
Silver has a density of 10.5g/cm3 and gold has a density of 19.3g/cm3. Which would have a greater mass, 5cm3 of silver or 5cm3 of gold ?
Silver has a density of 10.5 g/ [tex]cm^3[/tex] and gold has a density of 19.3 g/ [tex]cm^3[/tex], so out of 5 [tex]cm^3[/tex] of silver or 5 [tex]cm^3[/tex] of gold, the 5 [tex]cm^3[/tex] of gold would have a greater mass as the mass of gold is 96.5 g while the mass of silver is 52.5 g.
What is the relationship between density and mass?The mass of an object is equal to its density multiplied by its volume, so here is the calculation,
For 5 [tex]cm^3[/tex] of silver, the mass is,
mass = density x volume
mass = 10.5 g/ [tex]cm^3[/tex]x 5 [tex]cm^3[/tex]= 52.5 g
For 5 [tex]cm^3[/tex] of gold, the mass is
mass = density x volume
mass = 19.3 g/ [tex]cm^3[/tex]x 5 [tex]cm^3[/tex]
mass = 96.5 g
Hence, silver has a density of 10.5 g/ [tex]cm^3[/tex] and gold has a density of 19.3 g/ [tex]cm^3[/tex], so out of 5 [tex]cm^3[/tex] of silver or 5 [tex]cm^3[/tex] of gold, the 5 [tex]cm^3[/tex] of gold would have a greater mass as the mass of gold is 96.5 g while the mass of silver is 52.5 g.
Learn more about the density and mass relationship here.
https://brainly.com/question/13271221
#SPJ9
A ball is launched horizontally off a platform at 15 m/s. The ball takes 1 second to
hit the ground. The height of the platform is
m. The ball will
land
m. from the base of the platform.
Answer:
Below
Explanation:
The ball has one second to fall from its height and to travel horizontally at 15 m/s
Rate X Time = distance 15 m/s * 1 s = 15 meters from the platform .
df = do + vot + 1/2 a t^2
df = final position = o ft ( on the ground)
do = initial position = height
vo = original vertical velocity = 0
a = - 9.81 ms^2
so you have this:
0 = height + 1/2 (- 9.81) m/s^2 * (1)^2
height = 4.9 meters
a car starts from rest on a curve with a radius of 130 m and tangential acceleration of 1.3 m/s2 . Through what angle will the car have traveled when the magnitude of its total acceleration is 2.6 m/s2?
The car will have traveled through an angle of approximately 119.7 degrees when the magnitude of its total acceleration is 2.6 m/s^2.
What is the angle of approximate calculation?
The magnitude of the total acceleration of a car on a curved path can be given by:
a = √(at^2 + ac^2)
where at is the tangential acceleration (1.3 m/s^2), and ac is the centripetal acceleration, which is given by:
ac = v^2 / r
where v is the velocity of the car and r is the radius of the curve (130 m).
Setting a = 2.6 m/s^2, we can solve for v:
v = √(r * a^2 - at^2) = √(130 * 2.6^2 - 1.3^2) = 27.47 m/s
The angle through which the car will have traveled can be found using the equation for the arc length s:
s = r * θ
where θ is the angle in radians. Substituting the values for v and t into the equation for s, we can solve for θ:
θ = s / r = v * t / r
Since the car started from rest, t can be found from the equation for acceleration:
at = v / t
t = v / at = 27.47 / 1.3 = 21.06 s
Finally, substituting t into the equation for θ, we get:
θ = v * t / r = 27.47 * 21.06 / 130 = 2.07 radians = 119.7 degrees
To know more about angle of approximate, Check out:
https://brainly.com/question/27586078
#SPJ4
.
a boy on a skateboard pushes off the ground with his foot. he and the skateboard accelerate down the sidewalk due to the force
A boy on a skateboard pushes off the ground with his foot. he and the skateboard accelerate down the sidewalk due to the force on the ground in one direction.
The ground applies an equal and opposite force on the boy in the opposite direction. This force causes the boy and the skateboard to accelerate forward.
According to Newton's second law of motion, the acceleration of an object is directly proportional to the force applied to it and inversely proportional to its mass.
Therefore, the acceleration of the boy and the skateboard will depend on the force applied by the boy's foot and the combined mass of the boy and the skateboard.
To know more about force here
https://brainly.com/question/12785175
#SPJ4
Which lists the major steps of solar system formation in the correct order? collapse, accretion, condensation collapse, condensation, accretion accretion, condensation, collapse
The three main phases of the development of the solar system are collapse, condensation, and accretion.
What is the process of accretion?The process whereby solids accumulate to become progressively larger structures until planets are established is known as accumulation throughout the study of planets. A disc of coarser solid materials mixed with gas at the beginning has a large extent based of around 1% of the volume of the hydrocarbons.
What causes accretion to form?Small particles are pulled together by attraction forces to form bigger masses during the process of accretion. Gravity draws these particles together, where they combine to form comets and asteroid bodies. Protoplanets are created by collisions between planetesimals.
To know more about accretion visit:
https://brainly.com/question/28807784
#SPJ4
The energy required for the phase change from solid to liquid for a substance is known as the heat of _____.
a.) vaporization
b.) sublimation
c.) fusion
d.) fission
e.) condensation
Phase Change
When a substance changes from one state of matter to another it is called a phase change. Common endothermic phase changes are melting, vaporization, and sublimation. Common exothermic phase changes are freezing, condensation, and deposition.
The energy required for the phase change from solid to liquid for a substance is known as the heat of fusion (C)
The amount of energy that must be supplied to a solid substance (usually in the form of heat) in order to cause a change in the substance's physical state and convert it into a liquid is referred to as the latent heat of fusion, which is also known as the enthalpy of fusion (when the pressure of the environment is kept constant). Because of the usage of this energy in the process of counteracting the attractive force that exists between the molecules, the kinetic energy of the particles does not increase, and as a result, the temperature does not go up.
To learn more about latent heat of fusion, click here:
https://brainly.com/question/8914501
#SPJ4
Which is the thickest layer of earth ? a. Crush b. Mantle c. Core d. Ocean
The thickest layer of the earth is the mantle. Option b is correct answer.
The mantle is the layer between the crust and the core, and it makes up about 84% of the earth's total volume. It has a thickness of about 2,900 km, making it much thicker than the crust, which has an average thickness of about 35 km, and the core, which has a radius of about 3,485 km.
The mantle is composed of solid rock that is subject to intense heat and pressure, which causes it to flow like a viscous liquid over very long periods of time. It is divided into the upper and lower mantle, and it plays a crucial role in the movement of tectonic plates and the formation of volcanic activity. Therefore, option b is correct.
To know more about the earth, here
brainly.com/question/12041467
#SPJ4
If you are told that an object that weighs 20 Newtons is raised a distance of 10 meters, you know that. O A the force of gravity on the object is 20 Newtons. O B the mass of the object is 20 Newtons. O C the force of gravity on the object is 10 meters. O D the mass of the object is 10 meters. E the acceleration of the object is 200 kilogram-meters.
Answer:
A
Explanation:
A) Force of gravity is 20 N Yes - Force is measured in N
B) No.....mass is generaly measured in KG or sub units of it
C) No ... meters is a measure of distance not force
D) No acceleration is m/s^2
What is st segment depression ?
An electrocardiogram (ECG) result called ST segment depression suggests a problem with the electrical activity of the heart.
The ECG's ST segment is a section that shows the beginning of ventricular repolarization. The ST segment is typically flat or just slightly raised in healthy people.
Nonetheless, there can be a reduction in blood supply to the heart tissue, for instance during an angina episode or a heart attack, which can result in ST segment depression.
Additional factors that contribute to ST segment melancholy include drug interactions, electrolyte imbalances, and other cardiac problems. Doctors can establish the proper therapy and the underlying reason by looking at the intensity and location of the ST segment depression.
Learn more about the electrocardiogram at
https://brainly.com/question/9328700
#SPJ4
How do you think you could change how much drag a paper plane has?
Answer: You can change many things ranging from the size and shape of the paper plane. Cutting slits into the plane allows the air to carry it further.
how much is kg in gigapascal?
1 kgf/in² is equal to 6.89475729 × 10^-3 GPa. Here kgf/in² is the Imperial unit of pressure and GPa is the unit of pressure in the International System of Units (SI).
Kilogram-force per square inch (kgf/in²) and gigapascal (GPa) are units of pressure that have a place with various estimation frameworks. Be that as it may, it is feasible to change over between them utilizing a transformation factor.
1 kgf/in² is equivalent to 6.89475729 × [tex]10^(-3)[/tex]GPa.
In this manner, to change over a tension worth from kgf/in² to GPa, you can duplicate the worth by 6.89475729 × 10^-3. On the other hand, to change over a tension worth from GPa to kgf/in², you can separate the worth by this transformation factor.
For instance, in the event that you have a tension of 100 kgf/in², you can change it over completely to GPa as follows:
100 kgf/in² * 6.89475729 ×[tex]10^-3[/tex] GPa/kgf/in² = 0.689475729 GPa
Likewise, on the off chance that you have a tension of 2 GPa, you can change it over completely to kgf/in² as follows:
2 GPa/6.89475729 × 10^-3 GPa/kgf/in² = 290077.6509 kgf/in²
To learn more about units of pressure, refer:
https://brainly.com/question/18690776
#SPJ4
The complete question is:
how much kg force per square in gigapascal?
An electron traveling horizontally enters a region where a uniform electric field is directed upward. What is the direction of the force exerted on the electron once it has entered the field?.
It moves downward. An electron moving horizontally passes between two horizontal plates, the upper charged negatively, the lower positively. A uniform, upward-directed electric field exist in the region between the plates, and this field exert an electric force downward on the electron.
What is an electron?Electrons are involved in gravitational, electromagnetic, and weak interactions, as well as many other physical phenomena, including electricity, magnetism, chemistry, and thermal conductivity.
Since an electron has charge, it has an electric field surrounding it. If the electron is moving in relation to the observer, the observer will track the electron and produce a magnetic field.
According to the Lorentz force law, an electron's velocity will be impacted by electromagnetic fields created by external sources.
When accelerated, electrons emit or take in energy in the form of photons.
To know more about electron, click the link given below:
brainly.com/question/1255220
#SPJ4
A car of mass 1000 kg is moving at a speed of 90 km h–1. Brakes are applied and the car stops at a distance of 15 m from the braking point. If the car stops in 25 s after braking, calculate the average power of the brakes?
Answer:
Pavg =24.4×20800
Explanation:
1st u(initial velocity)=90×5/18=25m/s
v^2-u^2=2as........v=0
a=-20.8 then force=ma =1000×(-20.8)=-20800
P initial=f×u and P final=f×s/t
Pavg=Pi-Pf=fu-fs/t=f(25-15/25)=f(25-0.6)
Pavg=20800×24.4
A 16-g ball at the end of a 1. 4-m string is swung in a horizontal circle. It revolves once every 1. 09 s. What is the magnitude of the string's tension?.
The stress exerted on the string as it swings in a horizontal circle is 6.56 Newton. frequency is 1/1.09 = 0.92 Hz, and f is 1. (2L) × √T/m\s0.92 = 1/2(1.4) (1.4) (T)/4 multiply everything by 4 ((T/16) 0.92 = 0.36)
3.68 = 1.44 × √T \s √T = 3.68/1.44 = 2.56 \s T = 2.56² = 6.56
Describe a magnitude example."How much of a quantity" is how the word "magnitude" is defined. The magnitude, for instance, can be used to describe a comparison of the speeds of a car and a bicycle. Additionally, it can be used to describe how far an object has traveled or how much of an object is represented by its magnitude.
Are size advantages?The energy released at the earthquake's epicenter is measured in magnitude. Seismograph readings are used to calculate magnitude. The magnitude of the shaking caused by an earthquake is measured by its intensity. The impact on humans is used to gauge intensity.
To know more about Magnitude visit:
https://brainly.com/question/1447482
#SPJ4
an electron beam is aimed at two closely spaced slits. the beam is attenuated to produce only 1 electron per minute.
When an electron beam is aimed at two closely spaced slits, the electrons passing through the slits will interfere with each other, producing an interference pattern on a screen behind the slits. The interference pattern will be a series of bright and dark bands, where the bright bands correspond to constructive interference and the dark bands correspond to destructive interference.
When a beam of electrons is passed through two closely spaced slits, it creates an interference pattern on a screen behind the slits. This pattern results from the wave-like behavior of electrons and the interference between the electrons passing through the two slits. The pattern appears as a series of bright and dark bands, where the position and intensity of the bands are determined by the relative phase of the electrons.
The interference pattern only becomes noticeable with a large number of electrons passing through the slits at the same time. If only one electron is passing through the slits per minute, the pattern will not be easily observable.
"
Complete question
Indicate the result of this experiment:
an electron beam is aimed at two closely spaced slits. the beam is attenuated to produce only 1 electron per minute.
"
You can learn more about electron beam at
https://brainly.com/question/9976626
#SPJ4
if you are told that a 20 kilogram object is raised by 10 meters, you know that
It has 10,000 joules of potential energy.
What is potential energy?Potential energy is the energy stored in an object due to its position or configuration. This type of energy is due to the force of gravity and is determined by the mass of the object, the height it is raised, and the acceleration due to gravity.
In this case, the object has a mass of 20 kilograms and is raised by 10 meters. The acceleration due to gravity is 9.8 m/s2. When the object is raised, it gains 10,000 joules of potential energy, which can be calculated using the equation: PE = mgh, where m is the mass of the object, g is the acceleration due to gravity, and h is the height the object is raised. Thus, in this example, PE = (20 kg)(9.8 m/s2)(10 m) = 19,600 joules.
To know more about potential energy click-
https://brainly.com/question/24933254
#SPJ4
According to the information in the table, when does milo need to leave home in order to get to the basketball game in time to warm up appropriately?.
Milo need to leave home at 8.30am in order to get to the basketball game in time to warm up appropriately.
What advantages does a warm-up have?
Your heart rate and blood flow rise as you warm up. More oxygen can now go to your muscles thanks to this. The connections between your nerves and muscles are also activated and primed during a warm-up, which increases movement efficiency.
In general, warm-ups and cool-downs involve performing your activity more slowly and with lesser intensity. Perform five to ten minutes of low-intensity exercise before working out to warm up. Try exercises like jumping jacks, jogging, or walking. Try dynamic stretches, which get your body moving, as opposed to static stretches.
To learn more about exercises use link below:
https://brainly.com/question/18309852
#SPJ4
Crane takes 2. 0 minutes to lift a load to the top of a building. The change in gravitati potential energy of the load is 720 kj. What is the useful power output of the crane?.
6kW is the useful power output of the crane.
Define power.
Energy consumption per second is measured as power. The amount of force necessary to create a unit displacement is another way to quantify power. Power, a scalar quantity, is represented by the letter P. For instance, a light bulb with 100 W of electricity will provide more light than one with 10 W.
The power in a circuit is measured using electrical power, which is given in watts. Electrical and mechanical-electrical techniques are used to measure electrical power in centrifugal pump applications. A watt, which represents power, is equivalent to one joule every second.
Power = Work done /Time taken
Time = 2 minutes = 120 seconds.
Work = 720kJ = 720000J
Power = 720000/120 = 6000W
P = 6kW
To learn more about power use link below:
https://brainly.com/question/1634438
#SPJ4
what is the calibration nut on a bimetallic stemmed thermometer used for?
The calibration nut on a bimetallic stemmed thermometer is used for: determining if the product's temperature has exceeded safe limits during shipment or subsequent storage.
What is bimetallic stemmed thermometer?Bimetallic stemmed thermometer can check temperatures from 0˚F to 220˚F (–18˚C to 104˚C) and this thermometer measures temperature through its metal stem. When checking the temperature, insert the stem into the food up to dimple.
Bimetal thermometers work on the principle that different metals expand at different rates as they get heated. By using two strips of different metals in thermometer, movement of the strips correlates to the temperature and can be indicated along scale.
To know more about bimetallic stemmed thermometer, refer
https://brainly.com/question/24881415
#SPJ4
You push a 3500 kg SUV with a constant 450 N of force and start it from rest. How much
horsepower are you applying when the SUV is going 1.5 m/s?
(Show work please)
The power that is applied is approximately 0.9 horsepower when the SUV is going at a velocty of 1.5 m/s.
What is horsepower?A horsepower is a unit of power that is commonly used to describe the power output of engines and motors.
One horsepower is equivalent to 746 Watts.
The power exerted on the SUV is calculated using the formula below:
P = F * v
where:
P is the power in Watts,F is the force in Newtons, andv is the velocity in m/s.Substituting the given values, we get:
Power = 450 N * 1.5 m/s
Power = 675 Watts
To convert this to horsepower, divide by 746:
675 W / 746 W/hp
Power = 0.9 horsepower
Learn more about horsepower at: https://brainly.com/question/28379812
#SPJ1
What does the change in the period with respect to the eccentricity tell you about the dependence of the period on the eccentricity?
What does the shift in the period's relationship to its eccentricity reveal about the period's reliance on the eccentricity The duration is independent of eccentricity.
How is an ellipse's eccentricity determined?
Weirdness e = c/a if the focus's distance from the ellipse's center is "c" and the tip of the ellipse's distance from the central is "a." E = 1 b 2 a 2 is another formula to get the eccentricity of an ellipse.
What does geometric eccentricity mean?
The term "eccentricity" is defined in terms of the fixed-point known as focus as well as the fixed-line known as the perpendicular line in the plane. The definition of eccentricity in geometry, the eccentricity formula, and the eccentric of several conic sections, including parabola, ellipse, and hyperbola, will all be covered in detail in this article along with worked-out examples.
To know more about eccentricity visit:
https://brainly.com/question/30082593
#SPJ4
A person yelling is a transformation of what energy
Answer: force
Explanation: