What is the percent by mass of a solution with 1. 56 g of benzene dissolved in


gasoline to make 998. 44 mL of solution? (density of gasoline = 0. 7489 g/mL)

The major product of this reaction is the enolate ion formed after deprotonation, which can be represented as: CH2=CH-OCH2CH3

In the given reaction, we have the reactant CH3CH2OCH2CH3 and the reagent LDA/THF. LDA stands for lithium diisopropylamide, which is a strong, non-nucleophilic base, and THF is tetrahydrofuran, a common solvent used in organic chemistry.

1. LDA is a strong base, so it will deprotonate the least hindered, acidic proton of the ether CH3CH2OCH2CH3. In this case, the acidic protons are the ones adjacent to the oxygen atom (the α-protons).
2. Deprotonation of the α-proton results in the formation of a resonance-stabilized enolate ion.
3. Since there are no electrophilic species in the reaction mixture, the reaction stops at the enolate ion formation.

The major product of this reaction is the enolate ion formed after deprotonation, which can be represented as:
CH2=CH-OCH2CH3

Learn more about product here:

https://brainly.com/question/30762781

#SPJ11

The pH of the solution is 2.75.

The reaction between HCl and H2PO4- is:

HCl + H2PO4- → H3PO4 + Cl-

Initially, we have:

[H2PO4-] = 0.50 M

[HCl] = 0.10 M

Assuming complete reaction, the final concentration of H2PO4- and HCl would be:

[H2PO4-] = 0.50 - x

[HCl] = 0.10 - x

where x is the amount of H+ and Cl- produced.

Using the Henderson-Hasselbalch equation, we can calculate the pH of the solution:

pH = pKa + log([HPO4 2-]/[H2PO4-])

At the equivalence point, [HPO4 2-] = [H2PO4-], so:

pH = pKa + log(1) = pKa = 2.148

However, we need to consider the initial concentrations of H2PO4- and HCl. At the start of the reaction,

[H2PO4-]/[HPO4 2-] = 10^(pKa-pH), so:

0.50/(10^(2.148-2.8)) = [H2PO4-]/[HPO4 2-]

[H2PO4-] = 0.0486 M

[HPO4 2-] = 0.451 M

The concentration of H+ is equal to the concentration of Cl-, which is x. Therefore:

x = [H+] = [Cl-] = 0.10 - x

x = [H+] = [Cl-] = 0.05 M

Substituting the concentrations into the Henderson-Hasselbalch equation:

pH = 2.148 + log(0.451/0.0486) = 2.75

For more such questions on Henderson-Hasselbalch equation

https://brainly.com/question/13423434

#SPJ11

The pH of the solution is 2.75.The reaction between HCl and H2PO4- is:HCl + H2PO4- → H3PO4 + Cl-Initially, we have:[H2PO4-] = 0.50 M[HCl] = 0.10 MAssuming complete reaction,

the final concentration of H2PO4- and HCl would be:[H2PO4-] = 0.50 - x[HCl] = 0.10 - xwhere x is the amount of H+ and Cl- produced.Using the Henderson-Hasselbalch equation, we can calculate the pH of the solution:pH = pKa + log([HPO4 2-]/[H2PO4-])At the equivalence point, [HPO4 2-] = [H2PO4-], so:pH = pKa + log(1) = pKa = 2.148However, we need to consider the initial concentrations of H2PO4- and HCl. At the start of the reaction,[H2PO4-]/[HPO4 2-] = 10^(pKa-pH), so:0.50/(10^(2.148-2.8)) = [H2PO4-]/[HPO4 2-][H2PO4-] = 0.0486 M[HPO4 2-] = 0.451 MThe concentration of H+ is equal to the concentration of Cl-, which is x. Therefore:x = [H+] = [Cl-] = 0.10 - xx = [H+] = [Cl-] = 0.05 MSubstituting the concentrations into the Henderson-Hasselbalch equation:pH = 2.148 + log(0.451/0.0486) = 2.75

Learn more about Hasselbalch here:

brainly.com/question/13423434

#SPJ11

The volume of the NO₂Cl will be produced from the 3.3 L of the Cl₂ , is the 6.6 L.

The balanced chemical equation is as :

2NO₂(g) + Cl₂(g) ==> 2NO₂Cl(g)

The volume of the Cl₂ = 3.3 L

The moles of substance = mass / molar mass

1  mole of the Cl₂ produces the 2 mole of the NO₂Cl and the NO₂ is present in the excess amount.

The moles of the NO₂Cl = 2 × 3.3 mol

The moles of the NO₂Cl = 6.6 mol

At the constant pressure and the constant temperature the number of moles is directly proportional to volume.

The volume of the NO₂Cl = 6.6 L.

To learn more about volume here

https://brainly.com/question/20727955

#SPJ4

There is 0.46 oz in 13g

To find out how many ounces there are in 13 grams, first, we need to convert grams to pounds and then pounds to ounces. Here are the steps:

1. Convert grams to pounds: Since there are 2.2 lbs per 1 kg, and 1 kg equals 1000 grams, we first need to convert 13 grams to kg and then to lbs.

  13 g * (1 kg / 1000 g) * (2.2 lbs / 1 kg) = 0.0286 lbs

2. Convert pounds to ounces: Now that we have the weight in pounds, we can convert it to ounces using the conversion factor of 16 ounces per 1 pound.

  0.0286 lbs * (16 oz / 1 lb) = 0.4576 oz

3. Round to 2 significant figures: Finally, we round the result to 2 significant figures.

  0.4576 oz ≈ 0.46 oz

Therefore, there is 0.46 oz in 13g.

Learn more about numerical value here,

https://brainly.com/question/31613508

#SPJ11

In the given equation, H₂O acts as a Bronsted-Lowry acid as it donates a proton and NH₂ - acts as a Bronsted-Lowry base as it accepts a proton.

In the provided equation, H₂O donates a proton (H+) to NH₂ -, making

H₂O the Bronsted-Lowry acid. NH₂ - accepts the proton, making it the Brønsted-Lowry base.

The resulting products are NH₃, which is formed after accepting the proton from H₂O, and OH-, which is formed after H₂O donates its proton. Bronsted-Lowry theory defines acids as species capable of donating protons and bases as species capable of accepting protons.

By identifying the species involved in proton transfer, we can determine the Brønsted-Lowry acids (donors) and bases (acceptors) in the given equation.

Learn more about Bronsted-Lowry acid

brainly.com/question/29317749

#SPJ11

The Lewis acid-base definition involves the classification of some substances as acids or bases that the other two definitions (Arrhenius and Bronsted-Lowry) miss.

This is because the Lewis definition focuses on the interaction between electron pairs, allowing for the identification of substances as Lewis acids (electron-pair acceptors) or Lewis bases (electron-pair donors) that may not exhibit typical acid or base behavior according to the Arrhenius or Bronsted-Lowry definitions.

1. Arrhenius Definition: An acid is a substance that increases the concentration of H+ ions when dissolved in water, while a base is a substance that increases the concentration of OH- ions.

2. Brønsted-Lowry Definition: An acid is a proton (H+) donor, and a base is a proton (H+) acceptor.

3. Lewis Definition: An acid is an electron-pair acceptor, and a base is an electron-pair donor.

The Lewis definition is broader than the Arrhenius and Brønsted-Lowry definitions because it includes substances that don't necessarily involve H+ ions. Thus, it classifies some substances as acids or bases that the other two definitions miss.

learn more about Lewis acid-base here

https://brainly.com/question/28299444

#SPJ11

(S),(R)-stilbene dibromide and (R),(S)-stilbene dibromide are related to each other as stereoisomers.

Stereoisomers are compounds that have the same molecular formula and sequence of bonded atoms but differ in the spatial orientation of their atoms. In this case, both compounds have the same molecular formula, C14H12Br2, but they have different configurations at the chiral centers.

The (S),(R)-stilbene dibromide and (R),(S)-stilbene dibromide are specifically enantiomers, a type of stereoisomer. Enantiomers are non-superimposable mirror images of one another, like left and right hands. The different spatial arrangement of atoms in enantiomers can significantly affect their chemical properties and biological activities.

The notation (S) and (R) indicate the absolute configuration of the chiral centers in the molecule. The (S) or (R) designation is determined by the Cahn-Ingold-Prelog priority rules. In (S),(R)-stilbene dibromide, the first chiral center has the (S) configuration and the second chiral center has the (R) configuration, while in (R),(S)-stilbene dibromide, the first chiral center has the (R) configuration and the second chiral center has the (S) configuration. This difference in configuration leads to their distinct stereochemical properties.

Learn more about Stereoisomers here: https://brainly.com/question/30483059

#SPJ11

In general, the partitioning of an alkene, alcohol, and acid in an extraction mixture depends on their solubility and the nature of the solvent used.

Alkene: Alkenes are typically nonpolar or slightly polar compounds. In an extraction process, alkenes are more likely to partition into nonpolar solvents, such as organic solvents like diethyl ether or hexane. They will tend to form a separate layer in the extraction mixture known as the organic layer. Alcohol: Alcohols are polar compounds due to the presence of the hydroxyl (-OH) group. Their solubility depends on the length of the carbon chain and the polarity of the solvent. Lower molecular weight alcohols (such as methanol or ethanol) are more soluble in water, which is a polar solvent. Higher molecular weight alcohols may exhibit lower solubility in water and preferentially partition into the organic layer.

Acid: Acids can vary in their solubility depending on their strength and the solvent used. Strong acids, such as mineral acids (e.g., hydrochloric acid, sulfuric acid), are typically highly soluble in water due to their ionization. Weak organic acids may also be somewhat soluble in water. However, if the organic acid is relatively nonpolar, it may partition into the organic layer. It's important to note that the actual partitioning behavior can be influenced by factors such as temperature, pH, concentration, and the presence of other compounds. The choice of solvents and their polarity will determine the distribution of the alkene, alcohol, and acid between the aqueous and organic layers in an extraction process.

Learn more about Alkenes here:

https://brainly.com/question/29283735

#SPJ11

The statement that is not true of primary batteries is:

The size of the battery has no influence on the voltage delivered.

This statement is false because the voltage delivered by a primary battery is directly proportional to its size. The larger the battery, the greater the number of electrochemical cells it contains, and the greater the voltage it can deliver.

For example, a typical AA alkaline battery has a voltage of 1.5 volts, while a D alkaline battery has a voltage of 1.5 x 2 = 3 volts, because it contains two AA cells. Similarly, a 9-volt battery contains six smaller cells that are connected in series to deliver a total voltage of 9 volts.

The other statements are true of primary batteries. The size of the battery does affect the number of moles of electrons delivered at a given time (statement 1), and alkaline batteries can deliver more energy than zinc-carbon dry cells of similar size (statement 3).

Specifically, alkaline batteries can deliver about three to five times the energy of a zinc-carbon dry cell of similar size, not thirty to fifty times as stated in statement 3.

For more question on batteries click on

https://brainly.com/question/26466203

#SPJ11

An ionotropic cholinergic receptor produces a postsynaptic potential that is typically excitatory

Ionotropic cholinergic receptors, also known as nicotinic acetylcholine receptors (nAChRs), are ligand-gated ion channels found at synapses in the nervous system

They play a crucial role in transmitting signals between neurons and muscles.

When a neurotransmitter, like acetylcholine, binds to the receptor, it causes the ion channel to open, allowing ions to flow across the membrane.

This produces a postsynaptic potential, which is a temporary change in the electrical potential of the postsynaptic neuron.

The specific type of postsynaptic potential generated by ionotropic cholinergic receptors is an excitatory postsynaptic potential (EPSP)

Learn more about neurotransmitters at

https://brainly.com/question/31116024

#SPJ11

The difference in color of a ruby and an emerald is related to their chemical composition and structure. Both gems are made of different minerals and trace elements which affect the way they absorb and reflect light, giving them their distinct colors.

Rubies are made of the mineral corundum, which is mainly composed of aluminum oxide with traces of chromium, which gives the stone its red color. On the other hand, emeralds are made of the mineral beryl, which contains traces of chromium, vanadium, and iron that give the stone its green color.

Therefore, the difference in color between a ruby and an emerald is a result of their chemical makeup and the trace elements present within each gemstone.

To know more about chemical composition visit:-

https://brainly.com/question/16997829
#SPJ11

The resulting nuclide is: ²³⁴₉₀Th

When uranium-238 (²³⁸₉₂U) undergoes alpha emission, it emits an alpha particle (⁴₂He). To find the resulting nuclide, you can subtract the alpha particle's mass number and atomic number from the uranium-238's mass number and atomic number.

Step 1: Subtract the mass numbers.
238 (from ²³⁸₉₂U) - 4 (from ⁴₂He) = 234

Step 2: Subtract the atomic numbers.
92 (from ²³⁸₉₂U) - 2 (from ⁴₂He) = 90

Now, you have the mass number and atomic number of the resulting nuclide: ²³⁴₉₀. The element with the atomic number 90 is thorium (Th). So, the resulting nuclide is:

²³⁴₉₀Th

Know more about nuclide

https://brainly.com/question/17216436

#SPJ11

The nuclide produced when uranium-238 decays by alpha emission is Thorium-234, represented as ²³⁴₉₀Th.

Alpha decay is a type of radioactive decay in which an alpha particle (a helium-4 nucleus) is emitted from the nucleus of an atom. In this case, the parent nucleus is uranium-238 (²³⁸₉₂U), which undergoes alpha decay to produce an alpha particle (⁴₂He) and a daughter nucleus.

The atomic number of the daughter nucleus is 2 less than that of the parent nucleus, while the mass number is 4 less. Thus, the daughter nucleus has 90 protons and 234 neutrons, giving it the isotope symbol ²³⁴₉₀Th.

Alpha decay is a type of radioactive decay where an atomic nucleus emits an alpha particle, which consists of two protons and two neutrons (i.e. a helium-4 nucleus). In the case of uranium-238, it undergoes alpha decay and emits an alpha particle, which has a mass of 4 and a charge of +2. Therefore, the atomic number of the daughter nuclide is 92 - 2 = 90, and the mass number is 238 - 4 = 234. Thus, the nuclide produced when uranium-238 decays by alpha emission is thorium-234, which is represented as 234 90Th.

learn more about isotope here:

https://brainly.com/question/28039996

#SPJ11

Among the types of radiation, alpha, beta, gamma, and x-ray, the one that requires the least amount of protective clothing is x-ray radiation.

X-rays are a form of electromagnetic radiation, and they have a shorter wavelength than gamma rays, which means that they carry less energy. As a result, they are less harmful to living tissues and do not require as much protection. In many cases, only a lead apron or a lead vest is needed to shield the patient from x-rays during medical procedures.
Alpha and beta radiation, on the other hand, are particles that can cause significant damage to living tissues and require more extensive protective measures, such as gloves, masks, and full-body suits. Gamma radiation is also highly penetrative and requires thick layers of lead or concrete to shield against it.
In summary, x-ray radiation is the type of radiation that requires the least amount of protective clothing due to its lower energy and shorter wavelength compared to other types of radiation. However, it is still important to take appropriate safety precautions when working with x-rays to minimize exposure and potential harm.

learn more about radiation

https://brainly.com/question/31476599

#SPJ11

Degenerate orbitals have the following characteristics: Degenerate orbitals have the same energy.

So, the correct answer is D.

Degenerate orbitals are orbitals that have the same energy level. This means that electrons in these orbitals have the same potential energy.

Characteristics of degenerate orbitals include having the same energy, and they are all identical in shape and size.

Additionally, degenerate orbitals have different values of the magnetic quantum number, m, but they share the same principal quantum number and azimuthal quantum number.

However, degenerate orbitals do not always have the same number of electrons in them, as this depends on the specific configuration of the atom.

Finally, it is important to note that degenerate orbitals only exist within the same subshell, and not across different subshells. It is also incorrect to say that degenerate orbitals are immoral and corrupt.

Hence, the correct answer is D.

Learn more about orbital at

https://brainly.com/question/18914648

#SPJ11

5 carbon pentoses include ribose, which is an important component of high energy compounds such as ATP (adenosine triphosphate) and NAD+ (nicotinamide adenine dinucleotide).

Ribose is a sugar molecule that forms the backbone of these molecules, providing the necessary structure for their function. ATP is the primary energy currency of cells and is involved in various cellular processes, including metabolism and muscle contraction.

NAD+ is a coenzyme that plays a crucial role in redox reactions and energy transfer within cells. The presence of ribose in these compounds allows for the storage and utilization of energy in biological systems.

To learn more about COMPOUNDS  click here;

brainly.com/question/13073940

#SPJ11

The binding energy per atom for 90Br is approximately 82.374 MeV.

1. Determine the number of protons and neutrons in 90Br: 35 protons (since Br has an atomic number of 35) and 55 neutrons (since 90 - 35 = 55).

2. Calculate the total mass of protons and neutrons: (35 protons × 1.007825 amu/proton) + (55 neutrons × 1.008665 amu/neutron) = 35.273875 amu + 55.476575 amu = 90.75045 amu.

3. Find the mass defect: 90.75045 amu (total mass of protons and neutrons) - 89.930638 amu (mass of 90Br) = 0.819812 amu.

4. Convert the mass defect to energy using Einstein's equation (E = mc^2) and considering that 1 amu = 931.5 MeV/c^2: 0.819812 amu × 931.5 MeV/c^2/amu = 763.549196 MeV.

5. Calculate the binding energy per atom: 763.549196 MeV / 90 atoms = 82.374 MeV/atom.

The binding energy per atom for an atom of 90Br is approximately 82.374 MeV.

For more information on atomic mass unit kindly visit to

https://brainly.com/question/14157924

#SPJ11

To can use Boyle's Law, which states that the pressure and volume of a gas are inversely proportional at constant temperature, assuming the amount of gas remains constant.

Mathematically, Boyle's Law can be expressed as P₁V₁ = P₂V₂, where P₁ and V₁ are the initial pressure and volume, and P₂ and V₂ are the final pressure and volume, respectively.

Given:

Initial volume, V₁ = 9.8 liters

Initial pressure, P₁ = 35 mmHg

Final volume, V₂ = 60 liters

Let's plug these values into the equation and solve for the final pressure, P₂:

P₁V₁ = P₂V₂

35 mmHg × 9.8 liters = P₂ × 60 liters

To find P₂, we can rearrange the equation:

P₂ = (35 mmHg × 9.8 liters) / 60 liters

P₂ = 5.7 mmHg

Therefore, when the volume is increased to 60 liters, the pressure of the gas will be approximately 5.7 mmHg.

Learn more about Boyle's Law here

https://brainly.com/question/21184611

#SPJ11

The pH of the mixture of nitric acid and sulfuric acid is approximately 2.70.To determine the pH of the mixture of nitric acid (HNO3) and sulfuric acid (H2SO4).

we need to consider their respective concentrations and dissociation constants.Both nitric acid (HNO3) and sulfuric acid (H2SO4) are strong acids that completely dissociate in water. The dissociation of nitric acid can be represented as:

HNO3 -> H+ + NO3-

And the dissociation of sulfuric acid can be represented as:

H2SO4 -> 2H+ + SO4^2-

Given that the volume of each acid is 35 ml and the concentration of each acid is 0.001 M, we have an equal number of moles for each acid.Since the acids are completely dissociated, the concentration of H+ ions in the mixture is twice the initial concentration, i.e., 0.002 M.

The pH of a solution is defined as the negative logarithm (base 10) of the H+ ion concentration. Therefore, we can calculate the pH using the equation:

pH = -log[H+]

pH = -log(0.002) ≈ 2.70

Therefore, the pH of the mixture of nitric acid and sulfuric acid is approximately 2.70.

To learn more about acid click here:

brainly.com/question/29037210

#SPJ11

To find the volume of chlorine gas at STP (standard temperature and pressure), we need to first determine the number of moles of Cl2 present in the given sample at 885 torr and 25°C using the Ideal Gas Law equation:

PV = nRT

Where:
P = pressure in atm
V = volume in L
n = number of moles
R = gas constant (0.0821 L atm/mol K)
T = temperature in Kelvin

Converting the given pressure and temperature to atm and Kelvin, respectively, we get:

P = 885 torr / 760 torr/atm = 1.16 atm
T = 25°C + 273.15 = 298.15 K

Substituting these values into the Ideal Gas Law equation and solving for n, we get:

n = PV/RT = (1.16 atm)(8.40 L)/(0.0821 L atm/mol K)(298.15 K) = 0.378 mol

Now, at STP, the pressure is 1 atm and the temperature is 0°C or 273.15 K. Using the molar volume of a gas at STP (which is 22.4 L/mol), we can find the volume of Cl2 gas at STP:

V = n x 22.4 L/mol = 0.378 mol x 22.4 L/mol = 8.46 L

The volume of Cl2 gas at STP is 8.46 L.

we are given the volume, pressure, and temperature of Cl2 gas. Using the Ideal Gas Law equation, we can find the number of moles of Cl2 gas present in the given sample. Then, by using the molar volume of a gas at STP, we can find the volume of Cl2 gas at STP. It is important to convert the given pressure and temperature to the correct units (atm and Kelvin) before applying the Ideal Gas Law equation. To find the volume that Cl2 will occupy at STP, we'll use the combined gas law formula.
To know more about chlorine visit

https://brainly.com/question/31560014

#SPJ11

Nicotine, coniine, quinine, atropine, and morphine are all examples of Alkaloids. Option A is correct.

Alkaloids are a group of naturally occurring compounds that contain nitrogen atoms and have pharmacological effects on humans and other animals.

They are typically bitter-tasting and often have powerful physiological effects. Examples of alkaloids include nicotine, which is found in tobacco plants, coniine, which is found in hemlock, quinine, which is used to treat malaria, atropine, which is used to dilate pupils and treat certain heart conditions, and morphine, which is a pain-relieving opioid.

Alkaloids have a wide range of biological activities and are used in medicine, agriculture, and other industries. The term "alkaloid" comes from the word "alkali" and was originally used to describe compounds that have a basic pH.

However, not all alkaloids are basic, and the term now refers more generally to compounds that have a nitrogen-containing ring structure and pharmacological activity.Therefore, the correct option is A.

The complete question is:

Nicotine, coniine, quinine, atropine, and morphine are all examples of A) alkaloids: B) carboxylic acids amides D) ethers_ E) esters.

To know more about Alkaloids, refer here:

https://brainly.com/question/15265691#

#SPJ11

To calculate the original molar concentration of Pb2+, we need to use the formula:

mol Pb2+ = (I * t) / (n * F)

where I is the current in amperes, t is the time in seconds, n is the number of electrons involved in the reaction (in this case, 2 electrons for the Pb2+ + Pb process), and F is the Faraday constant (96500 C/mol).

First, we need to convert the current from milliamperes to amperes:

5.0 mA = 0.005 A

Next, we can plug in the values we have:

mol Pb2+ = (0.005 A * 620 s) / (2 * 96500 C/mol)

mol Pb2+ = 0.000016 mol

Finally, we need to convert from moles to molarity (mol/L) using the volume of the sample:

100.0 mL = 0.100 L

Molarity Pb2+ = 0.000016 mol / 0.100 L

Molarity Pb2+ = 0.00016 M

Therefore, the original molar concentration of Pb2+ in the waste water sample was 0.00016 M.

The question gives us the information that the waste water sample was analyzed using coulometry based on the Pb2+ + Pb process. Coulometry is a method of chemical analysis that measures the amount of charge (in coulombs) that passes through a solution during an electrolysis reaction. In this case, the electrolysis of the Pb2+ + Pb process involves the reduction of Pb2+ ions to metallic lead (Pb), which means that the number of coulombs passed through the solution is proportional to the number of moles of Pb2+ present in the sample. By using the current and time values given in the question, we can calculate the number of moles of Pb2+ that were present in the sample, and then convert this to the original molar concentration (M) using the volume of the sample. The original molar concentration of Pb2+ in the waste water sample is 0.00032 M.

First, we need to calculate the total charge passed through the sample using the formula Q = I × t, where Q is the charge, I is the current (5.0 mA), and t is the time (620 s).

Q = 5.0 mA × 620 s = 3100 mC (1C/1000mC) = 3.1 C

Next, we can find the moles of Pb2+ reduced using the Faraday's constant (F = 96500 C/mol):

moles of Pb2+ = Q / F = 3.1 C / 96500 C/mol = 3.21 x 10^-5 mol

Now, we can determine the molar concentration of Pb2+ in the original 100.0 mL sample:

molar concentration = moles of Pb2+ / volume of the sample (in L) = 3.21 x 10^-5 mol / 0.1 L = 0.00032 M

To know more about electrolyzable visit

https://brainly.com/question/16889766

#SPJ11

The expected order of retention times for benzene, toluene, and m-xylene is: benzene, toluene, m-xylene.  

Benzene, toluene, and m-xylene are three common organic compounds that are often found together in crude oil and other petroleum products. They have similar boiling points and chemical properties, so they tend to vaporize at similar temperatures and mix together in air.

Gas chromatography is a common analytical technique that can be used to separate a mixture of volatile compounds based on their boiling points and other physical properties. In this case, the three compounds would be separated based on their retention times, which are the amount of time it takes for the compound to elute from the column and reach the detector.

The expected order of retention times for benzene, toluene, and m-xylene is as follows:

Benzene: This compound has the shortest retention time, so it will elute first from the column.

Toluene: This compound has a longer retention time than benzene, but a shorter retention time than m-xylene, so it will elute next.

M-xylene: This compound has the longest retention time of the three, so it will elute last from the column.

Therefore, the expected order of retention times for benzene, toluene, and m-xylene is: benzene, toluene, m-xylene.  

Learn more about benzene,

https://brainly.com/question/31837011

#SPJ4

The Buoyancy for the Goodyear blimp Spirit of the Innovation comes from the 2.03 x 10⁵ ft³ of the helium. The mass of the helium at the 24.00 °C and the 0.995 atm pressure is the 0.94 g.

The  volume, V = 57.48 L

The temperature, T = 24°C = 24 + 273 K = 297 K

The pressure, P = 1.00 atm

The molar mass of the Helium = 4.003 g/mol

The ideas gas law is :

n = ( PV)  / (RT )

n =  ( 1 × 57.48 ) / (0.0821 ) × 297 )

n = 0.235 moles

The mass of the helium is as :

Mass = moles × molar mass

Mass = 0.235 × 4.003

Mass = 0.94 g

The mass of helium is 0.94 g.

To learn more about mass here

https://brainly.com/question/3195245

#SPJ4

In a metabolic reaction with δG°' < 0 kJ/mol and δG < 0 kJ/mol, you can predict the following about the values of Keq and the mass action ratio (Q): C. Keq > 1 F. Q < 1

Since δG°' < 0 kj/mol, we know that the metabolic reaction is exergonic under standard conditions. When δG < 0 kj/mol, this means that the actual free energy change is even more negative than under standard conditions. Therefore, we can predict that the reaction will be even more favorable in the forward direction.
For the mass action ratio (q), we can use the equation Q = [products]/[reactants]. Since δG < 0 kj/mol, this means that the products are favored. Therefore, we can predict that the numerator of Q (i.e. [products]) will be larger than the denominator (i.e. [reactants]). This leads us to predict that Q > 1.
Finally, we can use the relationship between Q and Keq, which is Keq = Q when the reaction is at equilibrium. Since we predicted that Q > 1, this means that Keq must also be greater than 1. Therefore, we can predict that Keq > 1.
In summary, we can predict that Q > 1 and Keq > 1 for a metabolic reaction that has δG°' < 0 kj/mol and δG < 0 kj/mol.

Learn more about metabolic reaction here

https://brainly.com/question/31384460

#SPJ11

The ΔH for the reaction C₂H₄(g) + H₂(g) → C₂H₆(g) is -137 kJ/mol.

The desired reaction is:

C₂H₄(g) + H₂(g) → C₂H₆(g)

We can use the given equations to obtain the ΔH for this reaction as follows:

C₂H₄(g) + 3 O₂(g) → 2 CO₂(g) + 2 H₂O(l) ΔH1 = -1411 kJ/mol

H2(g) + 1/2 O₂(g) → H₂O(l) ΔH2 = -285.8 kJ/mol

C₂H₆((g) + 3 1/2 O₂(g) → 2 CO₂(g) + 3 H₂O(l) ΔH3 = -1560 kJ/mol

We need to manipulate these equations to obtain the desired reaction:

C₂H₄(g) + H2(g) → C₂H₆(g)

For this, we can use the following manipulations:

1. Multiply equation 2 by 3 and reverse it to get H2(g) → 1/2 O₂(g) + H₂O(l) with ΔH = +857.4 kJ/mol.

2. Add equation 1 and equation 3 after multiplying equation 1 by 2, so that the CO₂ and H₂O terms cancel out, leaving the desired reaction with ΔH = -137 kJ/mol:

2 C₂H₄(g) + 7 O₂(g) → 4 CO₂(g) + 4 H₂O(l) ΔH1' = -2822 kJ/mol

H2(g) → 1/2 O₂(g) + H₂O(l) ΔH2' = +857.4 kJ/mol (reversed and multiplied by 3)

2 C₂H₆(g) + 7 O₂(g) → 4 CO₂(g) + 6 H₂O(l) ΔH3' = -2340 kJ/mol (reversed and multiplied by 2)

2 C₂H₄(g) + 2 H2(g) + 9 O₂(g) → 2 C₂H₆(g) + 7 O₂(g) + 4 H₂O(l) ΔH = -137 kJ/mol

Therefore, the ΔH for the reaction C₂H₄(g) + H2(g) → C₂H₆(g) is -137 kJ/mol.

To know more about ΔH follow the link:

https://brainly.com/question/4253277

#SPJ4

a. The radioactive nuclide is 47¹⁰²Ag

b. The radioactive nuclide is 10²⁴Ne

c. The radioactive nuclide is 90²²³

a. 47¹⁰²Ag or 47¹⁰⁹Ag
The radioactive nuclide is 47¹⁰²Ag. It is unstable because it has a higher neutron-to-proton ratio than the stable nuclide 47¹⁰⁹Ag. Radioactive isotopes typically have imbalanced neutron-to-proton ratios.

b. 12²⁵Mg or 10²⁴Ne
The radioactive nuclide is 10²⁴Ne. This isotope of neon is unstable due to the presence of too few neutrons compared to protons. Stable magnesium, 12²⁵Mg, has a balanced neutron-to-proton ratio.

c. 81²⁰³Tl or 90²²³Th
The radioactive nuclide is 90²²³Th. This isotope of thorium is known to be unstable and undergoes radioactive decay, while 81²⁰³Tl is considered a stable isotope of thallium.

Know more about the Radioactive nuclide here :

https://brainly.com/question/31983829

#SPJ11

The compressibility of a real gas compared to an ideal gas can be influenced by two characteristics: intermolecular forces and molecular volume. A gas with stronger intermolecular forces and larger molecular volume would be less compressible than an ideal gas, while a gas with weaker intermolecular forces and smaller molecular volume would be more compressible than an ideal gas.

(i) Less compressible than an ideal gas: Real gases with stronger intermolecular forces tend to be less compressible than ideal gases. These intermolecular forces, such as hydrogen bonding or dipole-dipole interactions, cause the gas molecules to attract each other, making it harder to compress the gas. The intermolecular forces counteract the pressure exerted on the gas, resulting in a decreased compressibility compared to an ideal gas.

(ii) More compressible than an ideal gas: Real gases with weaker intermolecular forces and smaller molecular volumes are more compressible than ideal gases. Weak intermolecular forces allow the gas molecules to move more freely, making them easier to compress. Additionally, gases with smaller molecular volumes occupy less space and can be compressed more readily compared to ideal gases.

Overall, the compressibility of a real gas compared to an ideal gas is influenced by the strength of intermolecular forces and the size of the gas molecules.

To learn more about intermolecular forces click here : brainly.com/question/31797315

#SPJ11

There are three sets of hydrogens in 2,2-dimethyl pentane, with a total of 12 hydrogens.

The molecular formula of 2,2-dimethyl pentane is C7H16. The structure of the molecule consists of a chain of five carbon atoms, with two methyl groups (CH3) attached to the second carbon atom. Since the two methyl groups are identical, the hydrogens attached to them are also identical and form one set. Thus, there are two hydrogens in this set.

The remaining five carbon atoms in the chain have a total of 10 hydrogens. However, these hydrogens are not all the same. Some of them are attached to primary carbon atoms (carbon atoms that are directly attached to only one other carbon atom), while others are attached to secondary carbon atoms (carbon atoms that are directly attached to two other carbon atoms).

The hydrogens attached to primary carbon atoms form one set, while those attached to secondary carbon atoms form another set. Therefore, there are two sets of hydrogens in the chain, each with five hydrogens.

For more such questions on hydrogens:

https://brainly.com/question/31018544

#SPJ11

There are three different types (sets) of hydrogens in 2,2-dimethylpentane: 6 primary hydrogens (H-C-C), 2 secondary hydrogens (H-C-C-C), and 6 tertiary hydrogens (H-C-C(C)(C)).

The number of different types (sets) of hydrogens in a molecule is determined by the number and types of carbon atoms to which the hydrogens are attached. In 2,2-dim ethyl pentane, there are five carbon atoms, each with a different number of attached hydrogen atoms. The central carbon atom has two methyl groups attached to it, making it a tertiary carbon atom and giving it six tertiary hydrogens. The two carbon atoms next to it each have one methyl group attached to them, making them secondary carbon atoms and giving them two secondary hydrogens each. The two end carbon atoms have no methyl groups attached to them, making them primary carbon atoms and giving them three primary hydrogens each. Therefore, there are three different types (sets) of hydrogens in 2,2-dimethylpentane.

Learn more about - dim ethyl pentane  here;

https://brainly.com/question/13887419

#SPJ11

The number of grams of W formed when 3.20 x 10^22 molecules of WO3 react with excess H2 is 97.63 grams.

To find the number of grams of W formed, we need to follow these steps:

1. Determine the molar mass of WO3:

  - The molar mass of W is 183.84 g/mol.

  - The molar mass of O is 16.00 g/mol.

  - Since WO3 has three oxygen atoms, its molar mass is 183.84 + (3 * 16.00) = 231.84 g/mol.

2. Convert the number of molecules of WO3 to moles:

  - Divide the given number of molecules (3.20 x 10^22) by Avogadro's number (6.022 x 10^23) to get the number of moles.

3. Use the balanced chemical equation to determine the molar ratio between WO3 and W:

  - From the balanced equation, we know that 2 moles of WO3 react to form 6 moles of W.

4. Convert moles of W to grams:

  - Multiply the number of moles of W by its molar mass (183.84 g/mol) to obtain the mass in grams.

After performing these calculations, the resulting value is 97.63 grams of W.

To learn more about  molar mass click here

brainly.com/question/31545539

#SPJ11