The element with the atomic mass of 12 amu, and 6 nuetrons: (E2) A (B3) (D4) O (14)
Answer:like my photo bc i like it
Explanation:
omg i look .........................................
Color by number: Classifying Reactions
Hello! Can someone help me figure out what type of chemical reactions these equations are? Only the ones without the pencil next to them :)
Answer:
not chemical only that's classifying reactions
and figures equations
Explanation:
that may answer
sana po makatulong po sa inyo
The reaction of the different metals together to form a new compound is called a chemical reaction.
According to the question, we have to color the region which shows the behavior of the reaction.
Reaction first is a combustion reaction.Reaction second is the combination reaction.
Reaction third is double displacement reaction.
Reaction fourth is a decomposition reaction.Reaction fifth is a double displacement reaction.
Reaction sixth is a combination reaction.
Reaction seventh is a double displacement reaction
Reaction eight is a double displacement reaction
Reaction ninth is a combustion reaction.Reaction tenth is a decomposition reaction.
Hence, these are the answer to the question.
For more information, refer to the link:-
https://brainly.com/question/15804584
Explain what you know about acid rain and why it is bad.
Answer:
Explanation:
Acid rain that seeps into the ground can dissolve nutrients, such as magnesium and calcium, that trees need to be healthy. Acid rain also causes aluminum to be released into the soil, which makes it difficult for trees to take up water. ... The acidic clouds and fog strip important nutrients from their leaves and needles.
Place each noble gas symbol in front of the appropriate partial electron configuration to create an accurate electron configuration.
The noble gas that precedes a given partial electron configuration must itself have an electron configuration that is complete up to the partial electron configuration. The noble gas's electron configuration should, when fully written out right before the partial electron configuration, give us a valid electron configuration for some element.
For the first series, the highest principal energy level has the number 4, so our noble gas should at least be one that is in the third period (numerically, the energy level is the same as the period number). That noble gas would be argon. The partial electron configuration given is not that of a noble gas (note: all noble gases have an electron configuration that contains Np⁶, where N = the highest principal energy level). So, the noble gas that appropriately precedes our first partial electron configuration is [Ar].
Argon's electron configuration is 1s²2s²2p⁶3s²3p⁶. Using the Aufbau Principle, 4s² would correctly follow 3p⁶. [Ar]4s²3d¹⁰4p² is equivalent to writing out 1s²2s²2p⁶3s²3p⁶4s²3d¹⁰4p²; either way, this would happen to be the electron configuration of germanium.
Now that we hopefully have our fundamentals down, we can apply them to figure out the noble gases that precede the remaining partial electron configurations.
[Kr]5s²4d¹⁰5p⁵: This is the electron configuration of iodine.
[He]2s²2p⁵: This is the electron configuration of fluorine.
[Xe]6s²4f¹⁴5d¹⁰6p²: This is the electron configuration of lead.
[Ne]3s²2: This is the electron configuration of magnesium.
Write 3 complete sentences about ionic bonding.
GIVING BRAINLY PLEASE HELP ME!!
Answer:
1. Renewable Resource
2. Carbonate
3. Fossil Fuel
4. Nonrenewable Resource
5. Carbon Cycle
Answer:
1. Renewable Resource
2. Carbonate
3. Fossil Fuels
4. Non-renewable Resource
5. Carbon Cycle
What is the mass of a 12.31 cm3 piece of copper having a density of 8.96 g/cm3
Answer:
the mass of the copper piece is 110.2976 grams
What do you predict would happen to the cytoplasm of the onion cell as distilled water is added?
How do I Remember carbon tax ?
Explanation:
you can watch this video and understand
An ice cube, a glass of cold water, and a swimming pool are each exposed to the same amount of sunlight on a hot day. After five minutes, the ice cube is
melted and the cold drink is two degrees warmer, but the temperature of the swimming pool remains unchanged. What is the best explanation for these
observations?
A. The ice cube has a higher heat capacity than the glass of water and the pool.
B. The ice cube has a lower heat capacity than the glass of water and the pool.
C. The ice cube and the glass of water have higher heat capacities than the swimming pool.
D. The ice cube and the glass of water have lower heat capacities than the swimming pool.
Answer:
D
Explanation:
sana makatulong huhu follow me thanks
Answer:
C. the ice cube and the glass of water have higher heat capacity than the swimming pool
17) In a 0.450 M HONH2 solution, [OH] = 5.28 x 10-6 M.
HONH2(aq) + H20(1) HONH3(aq) + OH(aq)
a. Find [HONH3).
b. Find Kb.
c. Find pOH.
d. Find H.
e. Find the percent ionization of HONH, in a 0.450 MHONH2 solution.
f. What concentration of NaOH would be required to make a solution with
the same pH that was calculated in part d.?
g. Find the percent ionization of NaOH in the above solution.
Answer:
Given
[HONH2] = 0.45M
[OH-] = 5.26 x 10-6 M
HONH2 + H2O -------------> HONH3+ + OH-
Initial 0.45 55 0 0
at equilibrium 0.45-x 55-x x x
Given
[OH-] = x = 5.26 x 10-6 M
Therefore [HONH3+] = x = 5.26 x 10-6 M
pOH = -log[OH-] = -log(5.26 x 10-6) = 5.279
=> pH = 14- pOH = 8.72
From hendersen-hasselbach equaiton
8.72 = pKa + log(0.45/5.26 x 10-6)
=> pKa = 3.788
=> pKb = 14-3.788 = 10.21
percent of ionization = 5.26 x 10-6 * 100/0.45 = 1.17 x 10-3 %
concentration of NaOH required to make the same pH= [OH-] = 5.26 x 10-6 M
Percent of ionization of NaOH = [OH-]*100/NaOH = 5.26 x 10-6 *100/5.26 x 10-6 = 100%
A chemical process used to produce ethanol as a fuel additive was expected to produce 5,000 kilograms of ethanol based on the amounts of starting materials used, but only 4,760 kilograms were produced. What was the percent yield for ethanol in this process? A)1.09 percent B)4.80 percent C)95.2 percent D)105 percent
Answer:
The percent yield for ethanol in this process is 95.2%
Explanation:
Yield is the ratio between the amount of product actually obtained in the reaction and the maximum amount of product that could have been obtained if the reagents had been completely consumed.
The theoretical yield is the yield is the maximum you can get in a reaction.
On the other hand, the actual performance shows what you really get in experimentation. It is generally less than the theoretical yield.
So, the percentage return is the actual return times the theoretical return multiplied by 100.
So, in this case the percentage yield will be calculated as:
[tex]percent yield=\frac{4,760 kg}{5,000 kg} *100[/tex]
percent yield= 95.2%
The percent yield for ethanol in this process is 95.2%
Plants need _______________ from the air for photosynthesis.
A. carbon dioxide B. soil
C. oxygen D. carbon monoxid
Answer:
A. carbon dioxide
Explanation:
What would be the theoretical yield in grams of carbon dioxide in the reaction shown below if 30 g of C6H12O6 were reacted with an excess of oxygen? C6H12O6 + O2 -> CO2 + H2O
Answer: Thus 44 g of [tex]CO_2[/tex] will be produced if 30 g of [tex]C_6H_{12}O_6[/tex] were reacted with an excess of oxygen
Explanation:
To calculate the moles :
[tex]\text{Moles of solute}=\frac{\text{given mass}}{\text{Molar Mass}}[/tex]
[tex]\text{Moles of} C_6H_{12}O_6 =\frac{30g}{180g/mol}=0.17moles[/tex]
The balanced chemical equation is:
[tex]C_6H_{12}O_6 +6O_2(g)\rightarrow 6CO_2+6H_2O(g)[/tex]
As [tex]C_6H_{12}O_6[/tex] is the limiting reagent as it limits the formation of product and [tex]O_2[/tex] is the excess reagent.
According to stoichiometry :
1 mole of [tex]C_6H_{12}O_6[/tex] produce = 6 moles of [tex]CO_2[/tex]
Thus 0.17 moles of [tex]C_6H_{12}O_6[/tex] will produce=[tex]\frac{6}{1}\times 0.17=1.0mole[/tex] of [tex]CO_2[/tex]
Mass of [tex]CO_2=moles\times {\text {Molar mass}}=1.0moles\times 44g/mol=44g[/tex]
Thus 44 g of [tex]CO_2[/tex] will be produced if 30 g of [tex]C_6H_{12}O_6[/tex] were reacted with an excess of oxygen.
The formula for a different carbonate compound is KCO3.
Give the names of the three elements which make up this compound.
Answer:
ω∉1
Explanation:
A 100.-gram sample of H2O(l) at 22.0°C absorbs 830. joules of heat. What will be the final temperature of the water? Hurry pleaseeee!!!
Answer:
That is extremely confusing. Try contacting your prof.
Explanation:
4.) The temperature of solid silver increases from 30C to 40C by the addition of 117.5
joules of heat. What is the mass of the silver?
Answer:
The mass of silver is 49 g (0.049 kg).
Explanation:
Initial temperature = [tex]30^{o}[/tex]C
Final temperature = [tex]40^{o}[/tex]C
Quantity of heat required = 117.5 J
Specific heat capacity of silver = 0.240 J/g[tex]^{o} C[/tex]
mass of the silver can be determined by;
Q = mcΔθ
Where: Q is the quantity of heat required, m is the mass of substance, c is the specific heat capacity of the substance and Δθ is the change in temperature.
So that,
117.5 = m x 0.240 x (40 - 30)
117.5 = m x 0.24 x 10
= 2.4m
m = [tex]\frac{117.5}{2.4}[/tex]
= 48.9583
m ≅
m = 49 g
The mass of silver is 49 g (0.049 kg).
For any chemical process in an isolated system in which all reactants are converted to products, the original mass of reactants must be the final mass of products. is greater than or less than or equal to
Answer:
equal to
Explanation:
This question is depicting the LAW OF CONSERVATION OF MASS/MATTER, which states that matter can neither be created nor destroyed. Hence, in an isolated system, the original mass of the reactants must be EQUAL TO the final mass of the products formed.
In other words, the law states that no matter the change in chemical composition of the reactants in a chemical process, the mass does not change or it remains constant.
Which is a definition of motion?
A. Change in position
B. Force
C. Acceleration
D. Change in acceleration
Answer:
D.
Explanation:
Because force and energy are used to move.
how does weathering affect earths surface
as it breaks down the surface , it reshapes it
MULTIPLE CHOICE QUESTION
Which distance-time graph most
accurately represents the data in the
data table?
Answer:
(a) The slope of distance-time graph gives the speed of the objects.
As the slope of object (B) is the greatest among all, thus B has the largest speed and hence it is the fastest among all the objects.
(b) : As the curve of the objects do not intersect with each other even once, hence they cannot be at the same point on the road at the same time.
(c) : On the y axis (i.e. distance line), 7 small represents 4 km
∴ 1 small line =
7
4
=0.57 km
Position of C at the instant B passes A is 8 km
(d) ; Position of B at the instant it passes C is 2nd small line above 4 km i.e. 4+2×0.57=5.14 km
∴ Distance traveled by B =5.14−0=5.14 kmV
Explanation:
A basketball has a mass of 0.625 kg. Most basketball hoops are at a height of 3 m above the ground. What is the gravitational potential energy of a basketball just before it goes through the hoop?
The gravitational potential energy of a basketball : PE = 18.375 J
Further explanationGiven
height = h = 3 m
mass = 0.625 kg
Required
The potential energy
Solution
The energy produced from its position is called potential energy (PE)
which can be formulated as:
PE = m. g. h (g = 9.8 m/s²)
Input the value :
PE = 0.625 x 9.8 x 3
PE = 18.375 J
Picture a neutral P atom. This neutral atom will have
valence electrons. To reach a more stable configuration, this atom will
(gain, lose) electrons. The charge of the ion that forms will be
ASAP PLEASE
Answer:
It will have 5 valence electrons as its in group 5.
The atom will gain as its closer to the full configuration 8.
The charge will be 3- as it will gain 3 electrons.
Please help. I’m stuck
How many moles of NaF are produced in the resction between sodium bromide and calcium fluoride when 550 grams of sodium bromide are used
Answer: 5 moles of NaF would be produced when 550 grams of Sodium bromide are used.
Explanation:
From the question, the balanced chemical formula is illustrated below:
2NaBr + CaF2 → 2NaF + CaBr2
From the equation above;
Molecular mass of NaBr = 23 + 80 = 103g/ mol
Molecular mass of CaF2= 40+ (19×2)= 78g/ mol
Molecular mass of NaF = 23+19 = 42g/ mol
From the balanced chemical equation;
2 moles of NaBr reacted with 1mole of CaF to give 2 moles of NaF.
That is, 2 moles of NaBr= 2× 103 = 206g
2moles of NaF = 2×42= 84g
If 206g of NaBr yielded 84g of NaF
Therefore 550g of NaBr will yield Xg of NaF
X= 550×84/206
X= 224.27g of NaF
But 42g = 1 mole of NaF
Therefore 224.27g = X mole of NaF
X= 224.27 ×1/42
X is approximately 5moles.
what is the energy of a resting object called
Answer:
the called potential energy because the potential energy is the latentenergy in an object at rest
Help pls thnk you!!!!!!!!!!!!!!!!!!!. First to answer will get Brainliest!!! The answer have to be right tho!!!
Answer:
b i think im sorry if im wrong
Explanation:
How many grams of NaOH do you need to dissolve to make 1.55 Liters of a 1.55 Molar solution?
Answer:
Mass = 96g
Explanation:
Molarity = number of moles/volume of solvent
According to the provided information, volume = 1.55L, Molarity = 1.55M
number of moles (n) = molarity × volume
n = 1.55 × 1.55
n = 2.4025
n = 2.40mol
For NaOH, molar mass = 23 + 16 + 1 = 40g/mol
mole = mass/molar mass
Mass = molar mass × mole
Mass = 40 × 2.40
Mass = 96g
will mark u the brainliest. You have 1.5 moles each of hydrogen gas (H2) and sulfur hexafluoride gas (SF6). At STP, these gases will both occupy the exact same volume (33.6L). Will the gases have the same mass? Why or why not?
Answer:
90% of people marry there 7th grade love. since u have read this, u will be told good news tonight. if u don't pass this on nine comments your worst week starts now this isn't fake. apparently if u copy and paste this on ten comments in the next ten minutes you will have the best day of your life tomorrow. you will either get kissed or asked out in the next 53 minutes someone will say i love you
Explanation:
what type of reaction is CuO + NH3 = N2 + Cu + H2O?