BRAINLIEST. Agraph is probelow. The graph shows the speed of a car traveling east over a 12 second period. Based on the information in the graph, it can be
that in the first second

Answer:

* when L → H    chord too long

in this case we see that the speed to cross the well grows a lot (it goes towards infinity) therefore we do not have enough speed in the movement to cross

* when L → 0 very short string

         the speed of the platform is very small, so we do not have the minimum required value

        vox = √ (g / (2 (H)) D

Explanation:

For this exercise we are going to solve it using conservation of energy to find the velocity of the body and the launch of projectiles to find the velocity to cross the well.

Let's start with the projectile launch

as the body leaves the vertical its velocity must be horizontal

         x = v₀ₓ t

         y = y₀ + [tex]v_{oy}[/tex] t - ½ g t²

when reaching the ground its height of zero (y = 0) and the initial vertical velocity is zero

         t = √ 2 y₀ / g

we substitute

        x = vox √2y₀ / g

        v₀ₓ = √(g / 2y₀)     x

In the exercise, it tells us that the width of the well is D (x = D) and the initial height is the height of the platform minus the length of the rope (I = H - L)

       v₀ₓ = √(g /(2 (H -L))    D

this is the minimum speed to cross the well.

Now let's use conservation of energy

starting point. On the platform

      [tex]Em_{o}[/tex] = U = m g H

final point. At the bottom of the swing

      Em_{f} = K + U = 1 / 2m v² + m g (H -L)

as there is no friction the mechanical energy is conserved

        Em_{o} = Em_{f}

       m g H = 1 / 2m v² + m g (H -L)

        v = √ (2gL)

let's write our two equations

the minimum speed to cross the well

       v₀ₓ = √ (g /(2 (H -L))    D

the speed at the bottom of the oscillatory motion

       v = √ (2g L)

we analyze the extreme cases

* when L → H    chord too long

in this case we see that the speed to cross the well grows a lot (it goes towards infinity) therefore we do not have enough speed in the movement to cross

* when L → 0 very short string

         the speed of the platform is very small, so we do not have the minimum required value

        vox = √ (g / (2 (H)) D

From this analysis we see that there is a range of lengths that allows us to have the necessary speeds to cross the well

      V₀ₓ = v

      g / (2 (H -L) D² = 2g L

       4 L (H- L) = D²

        4 H L - 4 L2 - D² = 0

        L² - H L - D² / 4 = 0

let's solve the quadratic equation

      L = [H ± √ (H2-D2)] / 2

we assume that H> D

       L = ½ H [1 + - RA (1 - (D / H) 2)]

The two values ​​of La give the range of values ​​for which the two speeds are equal

A) The person lands in the moat if the rope's length is very short because :

B) The person lands in the moat if the rope length is similar to the height of the platform because :

Following the assumptions;

size of the person is much smaller than L and H

D = horizontal distance

Hence we can conclude that The person lands in the moat if the rope's length is very short because The speed of the platform is less than the required minimum speed  and  The person lands in the moat if the rope length is similar to the height of the platform because,the speed required to cross the moat approaches infinity.

Learn more about obstacle course : https://brainly.com/question/241926

Answer:

We are given:

initial velocity (u) = 0 m/s

final velocity (v) = 10 m/s

displacement (s) = 20 m

acceleration (a) = a m/s/s

Solving for 'a'

From the third equation of motion:

v² - u² = 2as

replacing the variables

(10)² - (0)² = 2(a)(20)

100 = 40a

a = 100 / 40

a = 2.5 m/s²

i typically focus on motivating others.. i wanna be a motivational speaker someday. tbh if anyone needs anyone to talk to id be happy to listen and i would give the best advice i can. heres my discord: ionknow22#2868

Answer: The parts closer to the equator.

Explanation:

The parts of the earth closer to the equator are similar to the plate, because they receive more sunlights than other parts. Which makes them hotter than any other regions in the earth. Example of such countries are Gabon, Uganda, Kenya, Maldives, the democratic republic of Congo, sao tome and principle  e.t.c

A theory is the closest to a scientific fact (Option B).

In conclusion, a theory is the closest to a scientific fact (Option B).

Learn more in:

https://brainly.com/question/2375277

Answer:

did you get the answer???

Answer: 38 m/s north

Explanation:

Answer:

options C is correct

Explanation:

asking questions is super in this education life

Answer:

option c should be the answer

Answer:

During a phase change, a substance undergoes transition to a higher energy state when heat is added, or to a lower energy state when heat is removed. Heat is added to a substance during melting and vaporization. Latent heat is released by a substance during condensation and freezing. Explanation:

Answer:

Explanation:

The work done by an object can be found by using the formula

workdone = force × distance

From the question we have

workdone = 40 × 4

We have the final answer as

Hope this helps you

hope this helps good luck

Answer:

did you tried putting it in standard form

Answer:

It may help to round all of the given numbers up to at least 1 or 2 decimal points or you could round up the number you get to 1 or 2 decimal places. For example, for this question round up your answer to 1.9 or 1.94

Explanation:

hope this helps!!

Answer:

They turn off

Explanation:

Answer:

i needed points it was an emergency sorry

Explanation:

Answer:

i)The ball shot out of the smokestack of a train moving in a straight line at constant speed will fall back into the smokestack

ii)The ball shot out of the smokestack of a train moving in a straight track ( gaining speed ) will fall behind the smoke stack

iii) The ball shot out of the smokestack of a train moving in a circular track at constant speed will fall away from the smokestack in a direction that is away from the middle of the circular track

Explanation:

The ball shot out of the smokestack of a train moving in a straight line at constant speed will fall back into the smokestack

The ball shot out of the smokestack of a train moving in a straight track ( gaining speed ) will fall behind the smoke stack

The ball shot out of the smokestack of a train moving in a circular track at constant speed will fall away from the smokestack in a direction that is away from the middle of the circular track

9514 1404 393

Answer:

  Not Necessarily

Explanation:

If the object is changing speed or direction, then it is accelerating. If it is maintaining the same speed and direction, it is not accelerating.

Answer:

Explanation:

The total travel time Suzette experiences is the sum of the times in each hallway. Using

  time = distance/speed

we can add the times.

  (35.0 m)/(3.50 m/s) +(48.0 m)/(1.20 m/s) +(60 m)/(5.0 m/s)

  = 10 s + 40 s + 12 s

  = 62 s

It takes Suzette 62 seconds to get to class. She does not beat the bell.

Answer:

2.83 m/s

Explanation:

you have the right answer

C.1cm

Explanation:

precision is how close two or more measurements are to each other

4?

Explanation:

sorry im not sure but

You can always take a metre ruler as a starting point. Your metre ruler has the same precision as your 15.0cm or 30.0cm ruler, so bring a ruler during exams as they'll come in handy ;)

The order goes like this:

rulers: 0.1cm or 1mm

measuring tape: 0.01cm or 0.1mm

vernier calipers: 0.001cm or 0.01mm

micrometer screw gauge: 0.0001cm or 0.001mm

((if i'm not wrong))

Answer:

-z

Explanation:

The force on a moving charge due to a magnetic field follows the right hand rule, so a positive charge, experiencing a magnetic deflection in the -y direction, while it moves in the direction of the x-axis, will do it  due to a magnetic field pointing in the +z direction.

As the electron has a negative charge, the magnetic field will point in the opposite direction, i.e., in the -z direction.

Answer:

a

The pressure will increase

b

[tex]T_2 =  576^oC[/tex]

Explanation:

From the ideal gas law we have that

     [tex]PV  =  nRT[/tex]

We see that the temperature varies directly with the pressure so if there is an increase in temperature that pressure will increase

   The initial  temperature is [tex]T_i  =  10^oC = 10 + 273 =  283 \  K [/tex]

The objective of this solution is to obtain the temperature of the gas where the pressure is tripled

Now from the above equation given that nR and V  are constant  we have that

    [tex]\frac{P}{T}  =  constant[/tex]

=>  [tex]\frac{P_1}{T_1}  =\frac{P_2}{T_2}[/tex]

Let assume the initial  pressure is [tex]P_1 =  1 Pa[/tex]

So tripling it will result  to the pressure being [tex]P_2 =  3 Pa[/tex]

So

     [tex]\frac{1}{283}  =\frac{3}{T_2}[/tex]  

=>   [tex]T_2  =  3 *  283[/tex]

=>    [tex]T_2  =  3 *  283[/tex]

=>    [tex]T_2  = 849 \ K [/tex]

Converting back to [tex]^oC[/tex]

   [tex]T_2  =  849 -  273[/tex]

=>  [tex]T_2 =  576^oC[/tex]

Answer:

Kindly check the explanation section.

Explanation:

For the design we are asked for in this question/problem there is the need for us to calculate or determine the strength in fracture and that of the yield. Also, we need to calculate for the block shear strength.

From the question, we have that the factored load = 500kips. Also, note that the tension splice must not slip.

Also, the shear force are resisted by friction, that is to say shear resistance = 1.13 × Tb × Ns.

Assuming our db = 3/4 inches, then the slip critical resistance to shear service load = 18ksi(refer to AISC manual for the table).

If db = 7/8 inches, then the shear force resistance for n bolt = 10.2kips, n > 49.6.

The yielding strength = 0.9 × Aj × Fhb= 736 kips > 500

The fracture strength = .75 × Ah × Fhb = 309 kips.

The bearing strength of 7/8 inches bolt at the edge hole and other holes = 46 kips and 102 kips.

Answer:

Capillary Action

Explanation:

Answer:

9.57m/s²

Explanation:

Given parameters:

Initial velocity  = 0m/s

Final velocity  = 90m/s

Distance  = 423m

Unknown:

Acceleration of the race car  = ?

Solution:

To solve this problem, we should apply one of the appropriate motion equations;

      V²  = U²   + 2as

Where V is the final velocity

           U is the initial velocity

           a is the acceleration

           s is the distance

  90²  = 0²  + 2 x a x 423

  8100 = 846a

      a  = 9.57m/s²

Answer:

1, 5, 4, 6

Explanation:

bc

Answer:

The medium increases in temperature while remaining in the same phase

Explanation:

The speed of a sound wave is increased when the medium increases in temperature while remaining in the same phase.

The temperature coefficient of a sound wave is defined as the measure of increase in the velocity of the sound wave per unit rise in its the temperature.

Here,

The speed of a sound wave is affected by various factors in the medium through which it propagates. Among them, speed of the wave is mostly influenced by the temperature of the medium.

The speed of a sound wave in a medium is directly proportional to the square root of its absolute temperature. So,

       v [tex]\alpha[/tex] √T

where v is thee speed of the sound wave and T is the absolute temperature.

Therefore,

As the temperature of the medium increases, the kinetic energy of the wave particles increases. Thus the speed of the sound wave is increased. As a result, the sound waves will move faster.

Hence,

The speed of a sound wave is increased when the medium increases in temperature while remaining in the same phase.

To learn more about temperature coefficient of sound, click:

https://brainly.com/question/29006600

#SPJ7

By cooling down the food, the thermal energy in the food molecules is reduced.

A refrigerator is an appliance that is commonly used in the home for the purpose of cooling down a substnace especially water and drinks.

Due to the fact that the molecules that compose matter are is in a state of constant random motion, the food molecules contain thermal energy. Hence, by cooling down the food, the thermal energy in the food molecules is reduced.

Learn more about thermal energy: https://brainly.com/question/11278589

Answer:68.15m/s

Explanation:

Given:

v₁=15m/s

a=6.5m/s²

v₁=?

x=340m

Formula:

v₁²=v₁²+2a (x)

Set up:

=[tex]\sqrt{15m/s} ^{2} +2(6.5m/s^2)(340m)[/tex]

A. The English system uses one unit for each category of measurement.

Answer:

A

Explanation: