Buried erosion surfaces that represent large intervals of time are called unconformities.
Unconformities are geological boundaries between rock layers that indicate a gap in the geological record, often caused by erosion, non-deposition, or deformation. These gaps can represent millions of years of Earth's history, and studying them can help geologists understand past geological events and the relative ages of different rock layers. There are three main types of unconformities: angular unconformities, where younger rock layers are deposited on top of older, tilted and eroded rock layers; disconformities, where there is a gap in deposition between parallel rock layers; and nonconformities, where sedimentary rock layers rest on top of older, eroded igneous or metamorphic rock. Unconformities are important tools in understanding the geological history of the Earth.
Learn more about Buried erosion here https://brainly.com/question/29422986
#SPJ4
which of the following results do you expect associated with a continental-continental a divergent plate boundary?
The result that is expected associated with a continental-continental divergent plate boundary is the formation of rift valleys.
What is a continental-continental divergent plate boundary?A divergent plate boundary is where two tectonic plates move apart from each other. When such boundaries exist within a continental plate, the phenomenon is known as a continental-continental divergent plate boundary. When such an event occurs, it creates a rift valley.
Types of divergent boundariesThere are two forms of divergent boundaries that occur at the continental level: rift valleys and mid-ocean ridges. Mid-ocean ridges occur underwater, while rift valleys occur on land. The African continent is now being ripped apart by a continental-continental divergent plate boundary, for example. A divergent boundary where one plate is oceanic and the other is continental is referred to as a continental-oceanic divergent boundary. The African plate is separating from the Arabian plate at the Red Sea, for example. The East Pacific Rise is an example of a mid-ocean ridge.
Learn more about divergent boundaries at https://brainly.com/question/28175481
#SPJ11
in north america, which of the following frequently consumed items is most likely to be supplied by a trans-national corporation?a. Milk
b. Water
c. Coffee
d. Electricity
In North America, the most likely product to be supplied by a transnational corporation among the frequently consumed items is coffee.
The correct answer is C.
Transnational corporations are businesses that have headquarters in one country and subsidiaries in multiple other countries. These corporations are big enough to affect local economies, politics, and people’s lives in a significant way
North America is one of the largest coffee-consuming regions globally, and it's produced in countries such as Brazil, Colombia, and Costa Rica. The vast majority of coffee traded internationally is produced by small farmers and then sold to intermediaries for processing and roasting.
The commodity chain of coffee is increasingly being dominated by TNCs (Transnational Corporations) such as Starbucks, Nestlé, and Jacobs Douwe Egberts, among others. These corporations buy large amounts of coffee beans to process, package, and distribute to retail outlets globally. Therefore, the most likely product to be supplied by a transnational corporation among the frequently consumed items in North America is coffee.
Learn more about transnational corporations at https://brainly.com/question/29798384
#SPJ11
the earth has seasons due to its tilt. three pieces of evidence proving this is the case are given below. please identify the one statement below that is not one of the pieces of evidence. question 1 options: the earth's elliptical orbit: the change in distance to the sun within the ellipse is only a few percent, which is not enough to cause the seasonal changes. simultaneously opposite seasons: the northern and southern hemispheres experience opposite seasons simultaneously, which is not possible if the changing distance was responsible for the changing seasons. the earth's closest approach: the earth's closest approach to the sun occurs in january one of the coldest months in the northern hemisphere the solar system's motion: the solar system is moving within the milky way galaxy itself, which causes the tilt of the earth.
The earth has seasons due to its tilt. Three pieces of evidence proving this is the case are given below.
Evidence to support the idea that the earth has seasons due to its tilt include:
Simultaneously opposite seasons: The northern and southern hemispheres experience opposite seasons at the same time,
which would not be feasible if the changing distance was the source of the changing seasons.
The earth's closest approach: The earth's closest approach to the sun takes place in January, one of the coldest months in the northern hemisphere.
The solar system's motion: The solar system is moving within the milky way galaxy itself, which causes the earth's tilt.
The earth's elliptical orbit: The change in distance to the sun within the ellipse is just a few percent, which isn't enough to cause seasonal changes.
Conclusion: The earth has seasons due to its tilt, with the northern and southern hemispheres experiencing opposite seasons at the same time.
The earth's closest approach to the sun takes place in January, which is one of the coldest months in the northern hemisphere.
The solar system's motion causes the earth to tilt, and the change in distance to the sun within the ellipse is only a few percent, which is insufficient to cause seasonal changes.
To know more about Season change here
https://brainly.com/question/8760061
#SPJ11
marine organisms living in the water column are referred to as blank , whereas organisms living on or in the ocean floor are referred to as blank
Marine organisms living in the water column are referred to as pelagic organisms, whereas organisms living on or in the ocean floor are referred to as benthic organisms.
What is pelagic and benthic? Pelagic refers to living organisms that live in the water column, as well as the habitats and resources found there. Benthic refers to organisms that live in, on, or near the seabed or the benthic zone.
In general, pelagic organisms are those that spend the majority of their time in the water column, which is the region of the ocean that extends from the surface to the ocean floor. Pelagic organisms include zooplankton, phytoplankton, and other types of plankton.
These organisms drift with the currents and are found throughout the water column, from the surface to the ocean floor. Pelagic organisms are classified according to their size and the depth at which they live. Benthic organisms are those that live on the ocean floor.
Benthic organisms include coral, sea urchins, starfish, crabs, lobsters, and other types of bottom-dwelling animals. Benthic organisms are adapted to life on the ocean floor and have evolved to survive in harsh conditions, including extreme temperatures, low oxygen levels, and high pressure.
Benthic organisms play an important role in the ocean ecosystem and are often used as indicators of the health of the marine environment.
To know more about marine organism refer here :https://brainly.com/question/12224407#
#SPJ11
which of the following is true about the nitrogen cycle? A. the form of nitrogen present in significant levels in the atmosphere is easily assimilated by most organisms B. most of the nitrogen in the atmosphere exists as organic molecules C. all organisms can incorporate atmospheric nitrogen into their proteins and nucleic acids D. the activity of specific types of microorganisms is important to convert atmospheric nitrogen molecules into usable forms
D. The activity of specific types of microorganisms is important to convert atmospheric nitrogen molecules into usable forms, is true about nitrogen cycle.
The nitrogen cycle is a complex process that plays an important role in regulating the global environment. The activity of specific types of microorganisms is critical to the nitrogen cycle, as they are able to convert atmospheric nitrogen molecules into usable forms.
The form of nitrogen present in significant levels in the atmosphere is molecular nitrogen (N2), which is not easily assimilated by most organisms.
To make it usable, nitrogen must be "fixed" into more accessible forms, such as nitrates and ammonia, which can then be taken up by plants and other organisms.
Other microorganisms are able to convert nitrates and ammonia back into molecular nitrogen, completing the cycle. Thus, the cycle is powered by the activity of microorganisms, which are able to convert atmospheric nitrogen into usable forms and then back again.
Therefore, correct option is D.
Know more about global environment here
https://brainly.com/question/30821114#
#SPJ11
Which of the following would be LEAST useful in correlating the ages of these two sequences of rocks?
a. numeric ages on the volcanic rocks on top
b. the pattern of magnetic reversals (R and N)
c. the overall sequence of the upper three layers
d. the type of material present in the landslide at the bottom of the right column
The pattern of magnetic reversals (R and N) would be the least useful in correlating the ages of the two sequences of rocks. This is because magnetic reversals are not necessarily directly related to the age of the rocks.
Rather, they are related to changes in the Earth’s magnetic field over time, which are not necessarily the same as the age of the rocks.
The numeric ages on the volcanic rocks on top, the overall sequence of the upper three layers, and the type of material present in the landslide at the bottom of the right column are all useful in correlating the ages of the two sequences of rocks as they can provide information about the relative ages of the rocks and the time periods in which they were formed.
Know more about magnetic reversals here
https://brainly.com/question/3844563#
#SPJ11
the sequence of deposition is a puzzle that geologists often have to solve. study the relative positions of the rock layers while considering how this outcrop formed, and then read the following statements and determine which are correct. select the three that apply. view available hint(s)for part d the sequence of deposition is a puzzle that geologists often have to solve. study the relative positions of the rock layers while considering how this outcrop formed, and then read the following statements and determine which are correct.select the three that apply. the environmental conditions (e.g., wind, amount of ash) were similar during deposition of these sediments. a close inspection of the sediments near the measuring stick shows no evidence of erosion or weathering. there is a large clast (a fragment of rock) that appears to be different from and inserted into the sediment. the layer at the bottom of the measuring stick was deposited prior to the layer at the top of the measuring stick. there is evidence of changes in how sediment was transported during deposition of these sediments.
The correct statements that apply are: The environmental conditions were similar during deposition of these sediments. A close inspection of the sediments. The layer at the bottom of the measuring stick.
The given question is asking about the correct statements related to the sequence of deposition that geologists often solve. The correct statements that apply are: The environmental conditions (e.g., wind, amount of ash) were similar during deposition of these sediments.There is a large clast (a fragment of rock) that appears to be different from and inserted into the sediment.There is evidence of changes in how sediment was transported during deposition of these sediments.
The sequence of deposition refers to the order of the rock layers present at a site. It is a puzzle that geologists often have to solve. To solve this puzzle, geologists study the relative positions of the rock layers and consider how this outcrop formed by taking into account the geological processes that were involved in forming the rock layers. A close inspection of the sediments near the measuring stick shows no evidence of erosion or weathering. This statement is incorrect.
Erosion and weathering are processes that are involved in the formation of rock layers.There is evidence of changes in how sediment was transported during the deposition of these sediments. This statement is correct.
Changes in how sediment was transported can cause changes in the size, shape, and sorting of the sediments. These changes can be used to interpret the depositional environment.The layer at the bottom of the measuring stick was deposited prior to the layer at the top of the measuring stick. This statement is a common sense observation that has been provided as an option to be misleading. It does not give any insight into the depositional sequence.The environmental conditions (e.g., wind, amount of ash) were similar during the deposition of these sediments. This statement is correct.
Similar environmental conditions can result in similar depositional environments, which can result in similar sedimentary rock sequences.There is a large clast (a fragment of rock) that appears to be different from and inserted into the sediment. This statement is correct.
The presence of a different type of rock can indicate a different depositional environment, such as a sudden influx of material from a nearby source.
Learn more about deposition of a sequence: brainly.com/question/13030140
#SPJ11
four strategies to reduce the impact of human activities on catchment areas
One of the key needs is water designation change. In the Breede WMA, specific catchment management drivers call for a change in how water is allocated.
What strategies for catchment management are there?The yields and environmental impacts of these new water supply schemes are likely to be negligible in comparison to those of the larger regional schemes when viewed separately. However, an increasing number of small water supply schemes are being developed. The Mitchell's Pass Diversion Scheme in the Upper Breede and further augmentation of Steenbras Dam from the Palmiet River in the Western Overberg have been identified as potential water augmentation options for the Berg WMA. Since towns in the upper reaches of catchments discharge treated effluent into the river and towns downstream abstract water from the river, treat it, and supply it as potable water, many water supply projects in the WMA actually fall under the category of unplanned indirect potable re-use.
To learn more about water supply visit :
https://brainly.com/question/14280225
#SPJ1
Match the image showing different types of continental accommodation of crustal extensionwith the best descriptions of events.
Normal faults divide the crust into wedge-shaped chunks by dipping in opposite directions. On the dropped blocks, fault movement creates basins, and on the upthrown blocks, mountains. Nonrotating fault blocks only experience minor extensions.
A fault is a fracture or a region of fractures that exists between two rock blocks. The blocks are capable of relative movement due to faults. This movement may take the shape of an earthquake if it happens quickly, or it may take the form of creep if it happens slowly. A few millimetres to thousands of kilometres may make up a fault. During geologic time, the majority of faults result in repeated displacements. In the event of an earthquake, the rock on one side of the fault abruptly shifts in relation to the other. The fault surface might be at any angle between vertical and horizontal.
Learn more about fault movement here:
https://brainly.com/question/7577959
#SPJ1
Place the following regions of the sun in order of increasing radius a. corona b. core c. radiative zone d. convective zone e. chromosphere f. photosphere
The following regions of the sun in order of increasing radius, from the inside out they are the core, the radiative zone, the convective zone, the photosphere, the chromosphere, and the corona.
From smallest to largest, the order of these regions is the core, radiative zone, convective zone, photosphere, chromosphere, and corona. The core is the innermost layer and is the hottest part of the sun, with temperatures ranging from 10-15 million degrees Celsius.
This is where nuclear fusion takes place, converting hydrogen into helium and releasing tremendous amounts of energy. The radiative zone is the layer surrounding the core, and temperatures here range from 1-2 million degrees Celsius. This is where energy produced in the core is transported outward. The convective zone is the layer below the photosphere, and temperatures here range from 1-2 million degrees Celsius.
This is where hot gas is transported to the surface in a process called convection. The photosphere is the visible layer of the sun and is the brightest part of the sun. Temperatures here range from 5,000-6,000 degrees Celsius.
The chromosphere is the layer above the photosphere and is much hotter than the photosphere, with temperatures reaching 20,000 degrees Celsius. The corona is the outermost layer of the sun and is the hottest part, with temperatures reaching 2-3 million degrees Celsius. This layer is composed of hot, ionized gas and is the source of solar winds.
Know more about the sun here:
https://brainly.com/question/1286910
#SPJ11
Please someone explain how to do this
Answer:
i just need pnts
explanation:
im sorry
Consider any other changes in your locality that you think have resulted from climate change.
Answer:
Explanation:
Increased frequency and intensity of heatwaves and droughts, leading to decreased water availability and increased risk of wildfires.More frequent and severe storms, including hurricanes, tornadoes, and thunderstorms, leading to flooding and property damage.Changes in precipitation patterns, such as increased rainfall in some areas and decreased rainfall in others, leading to changes in crop yields and water availability.Rising sea levels and increased coastal erosion, leading to loss of property and infrastructure in coastal communities.Changes in the distribution and abundance of plant and animal species, as they adapt to changing climatic conditions.Increased incidence of vector-borne diseases, such as Lyme disease and West Nile virus, as warmer temperatures allow disease-carrying insects to thrive in new areas.Shifts in the timing of seasonal events, such as flowering and migration, as a result of changing temperatures and weather patterns.The following statements compare and contrast cryovolcanism with regular volcanism. Which are true?
Choose one or more:
A. Cryovolcanism always ejects water ice crystals while regular volcanism always ejects rock.
B. Cryovolcanism operates at a higher temperature.
C. Both eject material from the interior of a planetary body.
D. Only regular volcanism has ever been observed. Cryovolcanism refers to ancient volcanism.
E. Both can be used to help determine the age of the surface of a body.
F. Regular volcanism is driven by a molten rock interior, while cryovolcanism is driven by a cold liquid interior.
The true statements are:
C. Both eject material from the interior of a planetary body.
E. Both can be used to help determine the age of the surface of a body.
F. Regular volcanism is driven by a molten rock interior, while Cryovolcanism is driven by a cold liquid interior.
The correct answer is C, E and F.
Statement A is false because Cryovolcanism can eject various materials, including water ice, ammonia, and methane, while regular volcanism usually ejects molten rock, ash, and gas, statement B is false as Cryovolcanism operates at much lower temperatures than regular volcanism, and the statement D is also false as Cryovolcanism has been observed on several icy bodies in the Solar System, including Enceladus and Europa.
Cryovolcanism and regular volcanism are two types of volcanic activity that occur on planetary bodies in our Solar System. While a molten rock interior drives regular volcanism, Cryovolcanism is driven by a cold liquid interior, usually water or another volatile substance.
To know more about volcanism, visit:
https://brainly.com/question/11945125
#SPJ4
Continuous areas of the earth's surface that are distinguishable from other areas on the basis of one or more shared characteristics
a) Supra-national Organization
b) Territory
c) State
d) Formal Regions
Continuous regions of the earth's surface that share one or more characteristics that set them apart from other regions a) Supra-national Organization
What precisely is supranational integration?The process of bringing together two or more nation-states or subnational regions within states by themselves or through a third party to form a new territorial configuration is known as supranational integration. As a concept, it usually refers to political coalition membership at the state level, but subnational organizations like regional councils can also help.
Since the end of World War II, supranational integration has been an important part of political and economic life everywhere. Political disparities and tensions between nation-states and subnational regions have been seen as a result of this. Supranational integration has sometimes taken on a distinct cultural character, despite its political and economic roots.
To learn more about integration visit :
https://brainly.com/question/30900582
#SPJ1
What is the name of the sedimentary structure depicted in the image?a)Mud cracksb)Ripple marksc)Cross-beddingd)Graded beddinge)Bioturbation structures
Ripple marks is the name of the sedimentary structure depicted in the image.
The sedimentary structure depicted in the image is "ripple marks."What are Ripple Marks?Ripple marks are sedimentary structures that occur on the surface of a sediment layer. In rivers, ocean waves, or wind, they develop as symmetrical or asymmetrical waveforms.
Ripple marks are created by the combined effects of gravity and wind or water currents on sand, silt, or mud. They are found on beaches, riverbeds, and deserts, among other places.
The presence of these marks can indicate the direction and intensity of water or wind movement, as well as the size of sediment grains that make up a sedimentary rock.
to know abut sedimentary structure :
https://brainly.com/question/30889537
#SPJ11
which of the following statements about the first stars that were born in the universe is expected to be true?
The first stars that were born in the universe were likely much more massive than stars born today.
These massive stars are thought to have contained more than 100 times the mass of our Sun, and it is likely that some were as massive as 500 times the mass of our Sun.
This mass is so great that it produces much higher temperatures and pressures than stars today, leading to different types of fusion reactions that are not seen in stars today.
These massive stars also had much shorter lifespans, lasting only a few million years, compared to stars like our Sun, which last billions of years.
The first stars also had very different compositions than stars today, being composed of only the lightest elements, hydrogen and helium, with no metals present.
This is due to the fact that heavier elements had not yet been produced in the early universe.
Due to their extreme masses and short lifespans, these first stars had much more powerful and energetic deaths, producing vast amounts of heavy elements through fusion and nucleosynthesis, which were then expelled into the universe.
This resulted in the universe becoming more enriched with metals, allowing for the formation of smaller, more stable stars with longer lifespans.
To know more about Stars here
https://brainly.com/question/7379319
#SPJ11
where can you find parícutin, one of the youngest volcanoes in the world?
Answer:
Paricutín, volcano, western Michoacán state, west-central Mexico, just north of the Tancítaro Peak and 20 miles (32 km) west-northwest of Uruapan. It is one of the youngest volcanoes on Earth
Explanation:
The Binone cinder cone lies along the SE coast. The youngest volcano, and the only historically active one, is Hibok-Hibok (also known as Catarman). It lies at the NW end of the island, about 6 km NW of Mt. Mambajao.
fog can form through each of the following ways except
a. By cooling the air until it reaches the dew-point (or frost-point) temperature
b. Increasing the moisture content until vapor presure reaches the water-vapor capacity
c. A combination of cooling and increasing humidity
d. Decreasing the moisture content of the air and increasing temperature
The fog can be formed in a few ways, including cooling the air, increasing humidity, or a combination of the two. Fog cannot be formed by decreasing the moisture content of the air and increasing temperature. Therefore the correct answer is D.
Fog is a type of cloud that forms on the earth's surface. It's often formed when warm, moist air cools and drops its moisture as a result of contact with a cold surface.
Fog can be formed in a few ways, including cooling the air until it reaches the dew-point temperature, increasing humidity until vapor pressure reaches the water-vapor capacity, or a combination of cooling and increasing humidity.
Decreasing the moisture content of the air and increasing temperature is not a way in which fog can form. To create fog, moisture must be present in the atmosphere and it must be able to cool and condense onto a surface, forming tiny water droplets that create the cloudy appearance.
For such more question on fog:
https://brainly.com/question/1191764
#SPJ11
1 Discuss climate change: what it is and how it differs from climate variability. List some of its most noticeable effects.
Climate change is a long-term change in the average weather patterns that have come to define Earth's local, regional and global climates .Climate change differs to climate variability as climate variability includes all the variations in the climate that last longer than individual weather events, whereas the term climate change only refers to those variations that persist for a longer period of time, typically decades or more. Some noticeable effects of climate change that are occurring today increased such as human emissions of heat-trapping greenhouse gases are already having widespread effects on the environment and heat waves, glaciers and ice sheets are shrinking, river and lake ice is breaking up , plant and animal geographic ranges are shifting and much more
what causes the east polar winds to be generated, which drive surface currents such as the east green land current
The east polar winds are generated by a combination of factors such as the rotation of the Earth, differences in temperature and pressure, and the Coriolis effect. These winds drive surface currents such as the East Greenland Current.
What causes the East Polar winds to be generated, which drive surface currents such as the East Greenland Current?The East Greenland Current is a cold ocean current that flows from the Arctic Ocean's polar region to the Atlantic Ocean's southern region. The East Greenland Current is driven by the East Polar winds, which are generated by a combination of factors such as the rotation of the Earth, differences in temperature and pressure, and the Coriolis effect.
The rotation of the Earth causes winds to deflect to the right in the Northern Hemisphere and to the left in the Southern Hemisphere, thanks to the Coriolis effect. The difference in temperature and pressure between the polar region and the lower latitudes produces a pressure gradient that causes air to flow from high to low pressure regions.
These pressure gradients, combined with the Coriolis effect, result in strong and steady East Polar winds. The East Polar winds, in turn, generate the East Greenland Current.
Learn more about Greenland at
https://brainly.com/question/2187881
#SPJ11
What are gases that accumulate in the atmosphere and contribute to global warming?
The gases that accumulate in the atmosphere and contribute to global warming are known as greenhouse gases. They trap heat from the sun and cause the Earth's temperature to increase.
What is global warming?Global warming refers to the phenomenon of Earth's average surface temperature increasing due to human activities that increase the concentration of greenhouse gases in the atmosphere. Greenhouse gases such as carbon dioxide, methane, and water vapor trap heat in the Earth's atmosphere, causing global temperatures to rise. This is referred to as the greenhouse effect.
What is the greenhouse effect?The greenhouse effect is a natural process that occurs when certain gases in the Earth's atmosphere, referred to as greenhouse gases, trap heat from the sun, preventing it from escaping into space. As a result, the Earth's temperature is kept within a range that is conducive to life as we know it.
However, human activities such as burning fossil fuels, deforestation, and industrial processes have led to an increase in the concentration of greenhouse gases in the atmosphere, intensifying the greenhouse effect and causing global warming. This is a significant concern, as global warming can have a range of negative impacts on the environment and human societies.
Learn more about global warming at
https://brainly.com/question/12908180
#SPJ11
what is the dominant factor in the location of the population settlements in north africa and southwest asia?
The dominant factor in the location of population settlements in North Africa and Southwest Asia is the availability of resources.
These regions are characterized by harsh climates and thirsty geographies, limiting the vacuity of pastoralist land and fresh water. People have settled near gutters, oases and littoral areas as these offer access to water and land suitable for husbandry. In some areas, similar as the Middle East,
oil painting reserves have been a major factor in the position of agreements, as they give an profitable source of income. In other areas, similar as the Maghreb, mortal agreements have been established in areas with a more temperate climate, allowing for further varied foliage and a more different range of resources.
To know more about population settlements visit:
https://brainly.com/question/15974455
#SPJ4
What types of weathering contribute to the lead problem in Picher, Oklahoma? a. Frost wedging b. Biological c. Dissolution d. All of the above.
Option A : Frost wedging.The types of weathering that contribute to the lead problem in Picher, Oklahoma are Frost wedging.
The Picher area of Oklahoma was a mining region for lead, zinc, and other minerals in the early 1900s. The extensive mining operations resulted in a lead-enriched atmosphere that resulted in a soil cover of up to 40 feet in some areas.
Mechanical or physical weathering: Mechanical or physical weathering is the process of breaking rock into smaller pieces without changing the rock's chemical composition. Frost wedging, exfoliation, thermal expansion, and root wedging are all examples of mechanical or physical weathering.
Chemical Weathering: The process of breaking down rock by chemical reactions is known as chemical weathering. The chemical reaction between acid rain and limestone, for example, causes chemical weathering.
Biological weathering: Biological weathering, which is caused by plants and animals, is the process of breaking down rock into smaller pieces. Plant roots, for example, can break through rock as they expand, causing the rock to break down over time.Thus the correct option is A.
For such more questions on Frost wedging:
brainly.com/question/19800818
#SPJ11
Complete the description of convergent evolution Match the terms in the left column to the appropriate blanks on the right. Terms can be used once, more than once, or not at all. Reset Help analogous features in distantly Convergent evolution is the evolution of lineages. It occurs when related organisms obtain a needs. Such resemblance is said to be that appeared convergently do not have a trait due to Therefore, species with traits dependent closely shared tralt common ancestor Independent different + similar homologous
Convergent evolution is the process of evolution in which unrelated or distantly related organisms evolve similar traits. This happens as a result of similar environmental pressures, causing the organisms to develop analogous features in order to survive.
Such resemblance is said to be homologous and is independent of any shared ancestry. Traits that appear convergently do not have a closely shared common ancestor, but are instead the result of similar needs resulting in similar traits being formed in different species.
Therefore, species with traits dependent on similar environmental pressures can develop similar characteristics, even if they are distantly related. This process helps to explain why similar features can be seen in distantly related species and helps to recognize the importance of environment over ancestry in the formation of traits.
Know more about Convergent evolution here
https://brainly.com/question/30637872#
#SPJ11
what is the region where the quiche people live today. question 8 options: guatemala and the yucatan honduras and guatemala guatemala and costa rica belize and guatemala
Answer:
The K’iche’ Maya, also known as the Quiché people, live in the central highlands of Guatemala.
Explanation:
Commercial agriculture in dry climates relies heavily on irrigation. Which of the following best explains an environmental concern that results from irrigation in arid regions?
The high use of water for agriculture increases the price of water for people in urban areas.
The soil will have increased salinity, leading to soil erosion and reduced nutrients in the soil for plant health.
The increased production that results from irrigation of the crop will lead to decreases in crop prices as the total crop harvested will be higher.
The plants grown in this dry region will start to adapt to use less water, but the period to maturity will increase.
The soil will have increased salinity, leading to soil erosion and reduced nutrients in the soil for plant health. this can be the effect of commercial agriculture.
The phrase "commercial agriculture" is frequently used to describe industrial-sized farming. But, in a legal sense, even operating a tiny produce stand is considered commercial agriculture. When food is grown commercially, it is done so to sell it. Marketing includes marketing to or through a variety of outlets, such as produce stands nearby, supermarkets, wholesalers, foreign nations, and restaurants. Due to the fact that commercial agriculture generates income that goes towards a nation's gross domestic product, it is often preferred to subsistence farming. As a result, governments frequently provide financial assistance to commercial farms in an effort to boost output. Commercial farms strive to optimise yields at the lowest possible cost because their business model depends on revenues.
Learn more about commercial agriculture here:
https://brainly.com/question/28768845
#SPJ1
Identifying the type of rock in an outcropping and seeing how it has deformed can help to determine the history of the surrounding area.
There are three basic types of rock: igneous, sedimentary, and metamorphic.
Igneous rocks, such as granite, are directly formed from cooling magma.
Sedimentary rocks, such as shale or limestone, are formed by layer upon layer of loose sediment, either from small bits of other inorganic rocks or the remains of living organic creatures, being deposited upon one another. Over time these sediments are turned to stone. Shales are formed by inorganic sedimentation, and limestones are comprised of organic materials.
Metamorphic rocks, such as gneiss, slate, or marble, are any type of rock that has undergone extreme heat and pressure and has been transformed into a new type of rock. Gneiss can be formed from granite, slate is formed from shale, and marble is the metamorphic result of heat and pressure being applied to limestone.
The outcropping that we are looking at is comprised of marble. Knowing what we know about the principles of geography, go through the statements below and put the events in chronological order from oldest to youngest.
Rank the areas identified in the cross section from oldest to youngest.
From oldest to youngest Igneous rock, limestone and marble (formed from limestone due to extreme heat and pressure).
Identifying the type of rock in an outcropping and seeing how it has deformed can help to determine the history of the surrounding area. There are three basic types of rock: igneous, sedimentary, and metamorphic. The outcropping that we are looking at is comprised of marble, which is a metamorphic rock formed by extreme heat and pressure applied to limestone.
From oldest to youngest, the chronological order of the areas identified in the cross section is as follows:
Learn more about type of rocks: brainly.com/question/26046551
#SPJ11
Why do the tributaries in landscapes (fold mountains) join the main stream at a 90° angle?
Identify from the following list possible environments or conditions that can lead to the formation of clay or silt deposits- chemical weathering of soils- windblown material generated by glaciers- floodplains of river systems- bottoms of lakes- wave action along a beach
Clay or silt deposits can be formed in different environments or conditions. These include floodplains of river systems, bottoms of lakes, wave action along a beach, chemical weathering of soils, and windblown material generated by glaciers.
The floodplains of river systems are environments where clay or silt deposits can form. River floods can carry a significant amount of silt and clay materials, and when the water slows down, these materials can settle and form deposits. This process can occur repeatedly over time, resulting in the accumulation of thick clay or silt layers.
Silt and clay deposits can also form in the bottoms of lakes. The deposition of silt and clay materials in lakes is usually influenced by the volume and velocity of water entering the lake and the nature of the lake basin. When silt and clay materials settle to the bottom of the lake, they can form thick layers over time.
The wave action along a beach can lead to the formation of clay and silt deposits. Wave action can move sediments along the shore and carry them offshore. When the waves slow down, the sediments can settle and form deposits.
Clay and silt deposits can also form due to the chemical weathering of soils. When minerals in the soil are exposed to water and oxygen, they can undergo chemical reactions that transform them into clay and silt materials.
The movement of glaciers can create windblown materials that can form clay or silt deposits. When glaciers move, they can grind rocks into fine-grained sediments. These sediments can be transported by wind and deposited in different environments to form clay and silt deposits.
Learn more about silt deposits at https://brainly.com/question/8395011
#SPJ11
which type of aggregates (igneous, sedimentary, or metamorphic) would you expect to be most suitable as a base-course material?
For a base-course material, the type of aggregate that would be the most suitable is sedimentary aggregate. This is due to its structure, which makes it stable, durable, affordable and easy to compact.
When it comes to aggregate materials, there are three main types: igneous, sedimentary, and metamorphic.
Igneous aggregates are formed from volcanic material that has been solidified. These materials are hard and durable, making them ideal for high-strength concrete and asphalt. They are also useful in railroad ballasts, building materials, and as fill for large voids in construction projects.
Sedimentary aggregates are formed from the erosion of pre-existing rock layers. This type of aggregate is the most commonly used in construction. It's known for its durability, low cost, and easy availability. Sedimentary aggregates include materials like gravel, sand, and limestone.
Metamorphic aggregates are formed by the transformation of pre-existing rocks through heat and pressure. They are the hardest and most durable. Marble, slate, and quartzite are examples of metamorphic aggregates. They are mostly used in high-strength concrete, railroad ballasts, and as fill for large voids in construction projects.
learn more about Igneous, Sedimentary and Metamorphic:
https://brainly.com/question/29512093
#SPJ11