by what factor does the nucleon number of a nucleus have to increase in order for the nuclear radius to increase by a factor of 3?

Answers

Answer 1

We need to increase the nucleon number by a factor of 27 in order to triple the nuclear radius. This means that we need to add 26 more nucleons to the nucleus.

The nucleon number refers to the total number of protons and neutrons present in the nucleus. On the other hand, nuclear radius is a measure of the size of the nucleus. It is important to note that the nuclear radius is not directly proportional to the nucleon number.
The nuclear radius is influenced by many factors, including the distribution of protons and neutrons within the nucleus, the forces between nucleons, and the amount of energy contained within the nucleus. However, we can assume that if we increase the number of nucleons in a nucleus, the nuclear radius will also increase.
Now, let's look at the specific question of how much the nucleon number needs to increase in order to triple the nuclear radius. To answer this, we need to use a formula that relates the nucleon number and the nuclear radius. One such formula is:
R = R0 * (A^(1/3))
where R is the nuclear radius, R0 is a constant value, and A is the nucleon number. The value of R0 depends on the specific nucleus under consideration. For a nucleus with A=1, R0 is equivalent to the radius of a single nucleon.
If we assume that R0 remains constant, we can rearrange the above formula to get:
A = (R/R0)^3
This formula tells us that the nucleon number is proportional to the cube of the nuclear radius. If we want to triple the nuclear radius (i.e., increase it by a factor of 3), we need to cube this factor:
3^3 = 27
Therefore, we need to increase the nucleon number by a factor of 27 in order to triple the nuclear radius. This means that we need to add 26 more nucleons to the nucleus.

To know more about nucleon visit:

https://brainly.com/question/9662870

#SPJ11


Related Questions

Meteorologists use weather balloons to carry weather instruments high into the atmosphere. when it is first released at earth’s surface, a weather balloon typically appears underinflated. what happens to the balloon’s volume and pressure as it rises into the atmosphere? check all that apply. the pressure in the balloon decreases. the pressure in the balloon increases. the volume of the balloon increases. the volume of the balloon decreases.

Answers

As the balloon rises, its volume grows because the external pressure is lower at higher altitudes, which causes the air molecules to expand more in order to reach mechanical equilibrium, where the external and internal pressures are equal. The balloon is underinflated because, in contrast to when it is on the ground, the pressure outside makes it difficult for gas molecules to push against the balloon's walls.As the balloon’s altitude increases, its volume also increases.At high altitude, the atmospheric pressure on the outside of the balloon is less that it is at Earth’s surface.As the pressure on the outside of the balloon decreases, the balloon’s volume increases because the pressure inside the balloon pushes the balloon outward.As the balloon’s volume increases, the pressure inside the balloon decreases until it is equal to the pressure on the outside of the balloon.In conclusion, condition verifications:

the pressure in the balloon decreases- True

the pressure in the balloon increases- False

the volume of the balloon increases- True

the volume of the balloon decreases- False

To learn more about weather balloon visit:

https://brainly.com/question/13079902

#SPJ4

Carbon dioxide and water are produced when ethanol, C2H5OH, is burned in oxygen. The number of moles of CO2 that is produced when burning 6.0 mol of ethanol is

Answers

The number of moles of CO₂ that is produced when burning 6.0 mol of ethanol is 12 mol.

What is Balanced Chemical Equation ?

The balanced chemical equation is the equation in which the number of atoms on the reactant side is equal to the number of atoms on the product side in an equation.

Now we have to write the balanced equation

C₂H₅OH + 3O₂ → 2CO₂ + 3H₂O

We can see that every 1 mole of ethanol we will get 2 mole of CO₂.

So 6.0 mol of ethanol we will get = 6.0 × 2.0

                                                       = 12 mol of CO₂

Thus from the above conclusion we can say that The number of moles of CO₂ that is produced when burning 6.0 mol of ethanol is 12 mol.

Learn more about the Balanced Chemical Equation here: https://brainly.com/question/26694427

#SPJ1

Describe the energy of the products in comparison to the energy the atoms had when the were wandering around the room free.

Answers

Answer: The atoms of the solid products are tightly packed whereas those in gas are loose.

Explanation:

Atoms in the solid structure are linked to each other by strong force of attraction and they collectively form an three-dimensional structure. The binding of the atoms form the shape of the solid product. The gas exhibit free atoms in it. The atoms are not linked to one another by strong force of attraction. The atoms as a part of gas have higher energy as those present in the solid products. So, the atoms of the gas wander freely as compared to those in the solid products.

A text book is on a desk. If the book weighs 14 N and the area of the book is 0.60 m 2 , what pressure is the book exerting on the desk?

Answers

Answer:

Explanation:

Pressure = Force / Area

F = 14 N

Area = 0.60 m^2

Pressure = 14/0.60

Pressure = 23.3 N

If you are worried about significant digits, the answer is 23

Suppose a aqueous solution of phosphoric acid () is prepared. Calculate the equilibrium molarity of . You'll find information on the properties of phosphoric acid in the ALEKS Data resource.

Answers

The equilibrium molarity HPO²₄- = 6.2 x 10⁻⁸M See the explanation below.

What is Equilibrium Molarity?

The molar concentration of a certain species in a solution is known as equilibrium molarity.

What is the calculation showing the above answer?

The initial concentration H₃PO₄ = 0.31 M

Kₐ₁ = 6.92 x 10⁻³ (See Image 1 attached)

Kₐ₁ = [H⁺][tex]_{eq}[/tex][H₂PO₄-][tex]_{eq}[/tex] / [H₃PO₄][tex]_{eq}[/tex]

6.92⁻³ x 10 = [(x) * (x)] / (0.31 M - x)

Solving for x, x = 0.043 M

[H+] = x = 0.043 M

[H₂PO₄-] = x = 0.043 M 0.0429805

Kₐ₂ = 6.2 x 10⁻⁸

See the second attached table

Kₐ₂ = [H+][tex]_{eq}[/tex] [HPO₄²-]eq / [H₂PO₄-]eq

6.2 x 10⁻⁸ = [(0.043 M + x) * (x)] / (0.043 M - x)

Solving for x, x = 6.2 x 10⁻⁸ M

[H₂PO₄-]eq = x = 6.2 x 10⁻⁸ M

Learn more about equilibrium molarity at;
https://brainly.com/question/14469428
#SPJ1

Calculate and record the expected mass of benzoic acid required to react with 20.00 mL of a 0.100 M sodium hydroxide solution. Record the mass of benzoic acid using three significant digits to reference later.

Answers

The mass of benzoic acid is 0.244 g.

Here use the concept of molarity.

What is molarity?

The amount of a substance in a specific volume of solution is known as its molarity (M). The moles of a solute per liter of a solution is known as molarity.

                            Molarity = no. of moles/volume (in L)

Calculation:

Given,

Molarity, M = 0.100 M

Volume, V = 20.00 mL = 20.0 × 10⁻³

To calculate,

Mass of benzoic acid C₇H₆O₂ =?

We know that,

Molecular mass of benzoic acid, C₇H₆O₂  = 122

No. of moles = weight/ molecular mass

The formula is modified as,

Molarity = weight of cholesterol/ (molecular mass) (Volume)

Put the values in the formula,

0.100 = Mass of benzoic acid/ (122) (20 × 10⁻³)

Mass of benzoic acid = 0.100 (122)(20 × 10⁻³)

                                    = 244 × 10⁻³

                                    = 0.244 g

Hence, the mass of benzoic acid is 0.244 g.

Learn more about molarity here:

brainly.com/question/13386686

#SPJ4

chemical change grade 10 mind map ​

Answers

Chemical change: A chemical reaction is the change of one chemical substance into another chemical substance. For instance: The rusting of iron, the curdling of milk, the digestion of food, breathing, etc.

What is a chemical reaction?

A chemical reaction results in a chemical change because a new material has entirely different properties from the original substance. In a chemical reaction, atoms rearrange themselves.Reactants are the chemicals that participate in a chemical reaction.Products are the new compounds created as a result of a chemical process.  An illustration of a chemical reaction is burning magnesium in the air to produce magnesium oxide.2Mg(s) + O2(g) △→ 2MgO(s)The magnesium ribbon is cleaned with sandpaper before being burned in the air. This cleans the magnesium ribbon's surface of the basic magnesium carbonate protecting coating.Reactant: Materials that participate in a chemical reaction are referred to as reactants. Mg and O2, as an example.A product is a newly created substance that results from a chemical reaction. Example: MgO.

A chemical reaction is the change of one chemical substance into another chemical substance.

To learn more about chemical reactions, refer to:

https://brainly.com/question/1222323

#SPJ9

Chemical  change is the change  chemical substance is transformed into another chemical substance.It is irreversible in  nature , for example Reaction of medicine in body , milk to curd etc.

What is the difference between chemical and  Physical change?

1)Physical change temporary or reversible in nature but chemical change is irreversible in nature

2)In physical change there no new product is formed but in chemical change there formation of new product takes .

3) Physical change is change sin shape ,size or state for example freezing of water , melting of wax , and example of  Chemical change are Burning of  coal, digestion of food

to learn more about chemical change click here https://brainly.com/question/28089135

#SPJ9

10.0 g of nickel is cooled to 2.0 °C and
placed into a sample of warm water.
The final temperature of the water and
nickel was 63.4 °C. How much energy
is absorbed by the nickel?
J
CNi = 0.120 g. C
9Ni = [?] J

Answers

Answer:

73.68 J

Explanation:

To find the energy absorbed by nickel, you need to use the following equation:

Q = mcΔT

In this equation,

-----> Q = energy (J)

-----> m = mass (g)

-----> c = specific heat (J/g°C)

-----> ΔT = change in temperature

The change in temperature is found by subtracting the initial temperature from the final temperature. You can plug the given values into the equation and simplify to find the energy absorbed.

m = 10.0 g

c = 0.120 J/g°C

ΔT = 63.4 °C - 2.0 °C = 61.4 °C

Q = mcΔT

Q = (10.0 g)(0.120 J/g°C)(61.4 °C)

Q = 73.68  J

Which of the following is NOT a property of metals?

A - shiny
B - ductile
C - can be solids, liquids, or gases
D - malleable

Answers

Answer:

C - can be solids, liquids, or gases

Explanation:

The enthalpy of fusion for Al is 10.7 kJ/mol. What is the energy change when 30.8 g of Al solidifies at 660°C?

Answers

The enthalpy of fusion for Al is 10.7 kJ/mol. -12.2 kJ is the energy change when 30.8 g of Al solidifies at 660°C.

What is Enthalpy of Fusion ?

The amount of energy needed to change 1 mole of substance under state change at constant temperature and pressure is called enthalpy of fusion. It is also known as Latent heat of fusion. Unit of enthalpy of fusion is kJ/mol.

How to find the change in energy ?

To find the change in energy use this expression:

q = n ΔH

where

q = Energy change

n = number of moles

ΔH = Molar enthalpy

Number of moles (n) = [tex]\frac{\text{Given mass}}{\text{Molar mass}}[/tex]

                                  = [tex]\frac{30.8\ g}{26.98\ \text{g/mol}}[/tex]

                                  = 1.141 mol

Now put the values in above formula we get

q = - n ΔH                    [Negative sign is used because Al solidifies here]

  =  - (1.141 mol × 10.7 kJ/mol)

  = -12.2 kJ

Thus from the above conclusion we can say that The enthalpy of fusion for Al is 10.7 kJ/mol. -12.2 kJ is the energy change when 30.8 g of Al solidifies at 660°C.

Learn more about the Latent heat of fusion here: https://brainly.com/question/87248

#SPJ1

The Venn diagram shown below compares the nuclear reactions in the sun and nuclear power plants.

Picture shows two ovals which overlap in the middle. The oval on the left has the label 'Sun' on top and 'A' within it. The oval on the right has the label 'Nuclear power plants' on top and 'Splitting of atoms' within it. The overlapping portion has the label 'Release of energy' within it.

What process is best described by A?

Destruction of atoms
Fission of atoms
Fusion of atoms
Repulsion of atoms

Answers

The process which is best described by "A" in this Venn diagram is: C. fusion of atoms.

What is nuclear fusion?

Nuclear fusion can be defined as a type of nuclear reaction that involves joining or combining two (2) smaller nuclei of atoms, so as to form a single heavier nucleus accompanied with the release of energy.

Based on the Venn diagram in the image attached below, we can logically deduce that the process which is best described by "A" is fusion of atoms.

Read more on nuclear fusion here: https://brainly.com/question/9903602

#SPJ1

For what mechanistic reason does g1 of lactase first act as a brønsted acid during catalysis?.

Answers

Answer:  Carboxylation of hydroquinone

a sodium hydroxide solution is 19 M. What will the strength of the solution formed if 25 ml of this NaOH solutio nis diluted to 5.0 Liters

Answers

the strength of the solution formed is 3.8.

What is the strength of the solution?

The amount of solute dissolved in grammes per litre of the solution is used to determine the solution's strength. It stands for the solution's potency or concentration. It uses grammes per litre of expression.

Concentration of NaOH = 19 M

Initial volume of NaOH = 25 mL= 0.025 L

Moles of NaOH = 19*0.025

                        = 0.475 moles

Final volume of NaOH solution = 5 L

Final concentration = 0.475/5

                              = 0.095 M

so, the strength is 19/5

                            = 3.8

to know more about strength of the solution go to - https://brainly.com/question/15848974

#SPJ4

The reaction between calcium carbonate (CaCO3) and HCl produces calcium chloride (CaCl2), carbon dioxide (CO2), and water (H2O).What happens when the concentration of hydrogen chloride (HCl) molecules is doubled in this reaction?

CaCO3 + 2HCl → CaCl2 + CO2 + H2O

When the hydrogen chloride concentration doubles, the number of collisions between the reactants
, which causes the rate of the forward reaction to
.

Answers

When the hydrogen chloride concentration doubles, the number of collisions between the reactants becomes increased, which causes the rate of the forward reaction to be faster.

What is the rate of a reaction?

The rate of a reaction is how fast a chemical reaction occurs i.e. the conversion of reactants to products.

The rate of a chemical reaction can be influenced by certain factors including the concentration of reactants.

The more the concentration of a reactant, the more the collision between the reactants and hence, the faster the reaction will proceed.

Therefore, when the hydrogen chloride concentration doubles, the number of collisions between the reactants becomes increased, which causes the rate of the forward reaction to be faster

Learn more about rate of reaction at: https://brainly.com/question/8592296

#SPJ1

Answer:1. increases 2. increases

Explanation:

Got it right on plato!

Guys pleaseeeee help:
- Which element is a member of the alkaline earth metals and has 12 neutrons?
- A burnt piece of toast is covered in this element. It is the fourth most abundant element and makes up many living things.
- Which element is an inert gas found in group VIII that produces a red glow in lights?

Answers

Answer:

Carbon- A burnt piece of toast is covered in this element. It is the fourth most abundant element and makes up many living things.

Magnesium- Which element is a member of the alkaline earth metals and has 12 neutrons?

Neon- Which element is an inert gas found in group VIII that produces a red glow in lights?

an example of xenon (Xe)

Answers

Answer: i am not sure what you mean but here are some product of xenon stroboscopic lamps, photographic flash lamps, high-intensive arc-lamps for motion picture projection, some lamps used for deep-sea observation, bactericidal lamps, sunbed lamps and high-pressure arc all use this gas. In fact, you probably see xenon lamps on a regular basis and if you want compounds : Xe2F2, XeF4, XeO3, XeF6....

Explanation:

Classify the following alcohol as primary,
secondary or tertiary.
A. primary
ОН
B. secondary
C. tertiary
Enter

Answers

The classification of the alcohols gives;

Compound 1 - Primary alcoholCompound 2 - Tertiary alcoholCompound 3 - Secondary alcoholCompound 4 - Secondary alcohol

What are alcohols?

Organic compounds occurs in families. The family of compounds is called a homologous series. The homologous series always have a functional group. The functional group is the atom, group of atoms or bond that is responsible for the chemical reactivity of the members of a given homologous series.

Now we know that the alcohols are those organic compounds that contains the -OH group. The could be aliphatic or alicyclic compounds. We shall now proceed to name the kind of alcohols that each of the compounds shown are;

Compound 1 - Primary alcoholCompound 2 - Tertiary alcoholCompound 3 - Secondary alcoholCompound 4 - Secondary alcohol

Learn ore about alcohols:https://brainly.com/question/4698220

#SPJ1

How many carbon monoxide molecules are in 0.75 moles of carbon monoxide?

Answers

Answer:

four 0.5 times 10 to the 23rd Adams of Neptune

Explanation:

Answer:

0.75 ( 6.02 × 10²³) = 4.515 x 10²³

Explanation:

0.75 ( 6.02 × 10²³) = 4.515 x 10²³

Which of the following statements about the normal operation of nuclear fission reactors is accurate?
Select one:
a. They release large amounts of chemical pollutants into the air.
b. A small amount of fuel produces a large amount of energy.
c. The nuclear waste is quickly and safely disposed of at the reactor site.
d. The hot water surrounding the reactor core can be used to provide hot water for communities in the area.

Answers

Answer:

Explanation:

b

A first-order reaction is 81omplete in 264s. A. What is the half-life for this reaction? b. How long will it take for the reaction to reach 95ompletion?

Answers

A first-order reaction is 81omplete in 264s.The half-life for this reaction (i) t 1/2 = =3.465×10 −3 s.to reach 95% Completion = 285 s.

To measure reaction rates, chemists initiate the reaction, measure the concentration of the reactant or product at different times as the reaction progresses,

For a 0-order response, the mathematical expression that may be employed to determine the half of life is: t1/2 = [R]0/2k. For a first-order reaction, the half of-existence is given by: t1/2 = zero.693/ok. For a 2d-order response, the method for the half-life of the response is: 1/okay[R]0

The 1/2-life of a response (t1/2), is the quantity of time needed for a reactant concentration to lower via half of compared to its initial awareness. Its software is used in chemistry and medicine to are expecting the awareness of a substance over time

Half of the lifestyles is the time required for exactly 1/2 of the entities to decay   50%.

Learn more about first-order reaction here:- https://brainly.com/question/518682

#SPJ4

1.0 mol of ethanol and 1.0 mol of acetic acid are dissolved in water and kept at 100 °C. The volume of the solution is 250 mL. At equilibrium, 0.25 mol of acetic acid has been consumed in producing ethyl acetate. Calculate Kc at 100 °C for the reaction C2H5OH(aq) + CH3CO2H(aq) CH3CO2C2H5(aq) + H2O(l)

Answers

Answer:

Kc = 0.333

Explanation:

First of all we state the equilibrium reaction:

C₂H₅OH(aq) + CH₃CO₂H(aq)  ⇄  CH₃CO₂C₂H₅(aq) + H₂O(l)

Initially we start with 1 mol of alcohol and 1 mol of acid. After the reaction goes complete, 0.25 moles of acid have been consumed. As ratio is 1:1, we also consumed 0.25 moles of alcohol. Then, in the product side we finally produced 0.25 moles of water and 0.25 moles of ethyl acetate.

How many moles are available in the reactant side, after the equilibrium?

1 mol - 0.25 moles (that have been reacted) = 0.75 moles.

To determine Kc, we need molar concentrations, so let's see M in products and reactants:

0.75 mol / 0.25 L = 3 M

0.25 mol / 0.25 L = 1 M

We needed to convert 0.250 mL to L → 0.250 mL . 1L/ 1000mL = 0.250 L

Let's determine expression for Kc:

Kc = [H₂O] . [CH₃CO₂C₂H₅]  / [C₂H₅OH] . [CH₃CO₂H]

1 . 1 / 3 . 3 = 1/9 → 0.333

What is the reason why the fermentation products acetate and hydrogen gas (H2) are never abundant in aerobic soils and sediments

Answers

Acetate and hydrogen gas (H2) is never abundant in aerobic soils and sediments because they are tiny, highly reduced molecules that many bacteria that breathe oxygen and nitrates quickly absorb to use as fuel for energy generation. 

Why are acetate and hydrogen gas not abundant in aerobic soils and sediments?

Hydrogen is a substrate for methanogenic archaea and, along with acetate, one of the most significant intermediates in the methanogenic breakdown of organic materials. Numerous methanogenic environments exhibit contributions of H₂ to CH₄ production that are both significantly lower and significantly higher than is considered usual. H₂ is rapidly converted in methanogenic settings due to the simultaneous generation by fermenting and syntrophic bacteria and consumption by methanogenic archaea.

Learn more about archaea here:

https://brainly.com/question/3654264

#SPJ4

Calculate the freezing point depression for 1 kilogram of sodium chloride (NaCl) in 5 kilograms of
water. The Ky of water is -1.86 °C/m.

Answers

[tex]\\ \rm\dashrightarrow \Delta T_f=ik_fm[/tex]

m is molality

Moles of NaCl

1000/2343.4mol

Molality

43.4/58.68

[tex]\\ \rm\dashrightarrow \Delta T_f=i(-1.86)(8.68)[/tex]

[tex]\\ \rm\dashrightarrow \Delta T_f=-16.14i[/tex]

i is vant Hoff factor

For NaCl vant Hoff factor is 2( Actually 1.9)

[tex]\\ \rm\dashrightarrow \Delta T_f=-16.14(2)=-32.28°C[/tex]

Moles of NaCl

[tex]\\ \tt{:}\dashrightarrow \dfrac{1000g}{23g/mol}[/tex]

[tex]\\ \tt{:}\dashrightarrow 43.4mol[/tex]

Find Molality

[tex]\boxed{\sf Molality=\dfrac{Moles\:of\:solute}{Volume \:of\: solution\:in\:kg}}[/tex]

Volume of solution=1kg+5kg=6kg

[tex]\\ \tt{:}\dashrightarrow m=\dfrac{43.4}{6}=7.2m[/tex]

Vant Hoff factor

[tex]\\ \tt{:}\dashrightarrow NaCl\longrightarrow Na^++Cl^-[/tex]

i=2

Freezing point depression

[tex]\\ \tt{:}\dashrightarrow \Delta T_f=iK_fm[/tex]

[tex]\\ \tt{:}\dashrightarrow \Delta T_f=2(-1.86)(7.2)[/tex]

[tex]\\ \tt{:}\dashrightarrow \Delta T_f=-26.7°C[/tex]

Cesium sulfite is formed from the cs cation and the so2−3 anion. What is the correct formula for this compound?

Answers

Cesium Sulfite is formed from the Cs cation and the SO₃⁻² anion. The correct formula for this compound is Cs₂SO₃.

What is Cation ?

Cations are positively charged ions. It forms when an element lose one or more electrons.


What is Anion ?

Anions are negatively charged ions. It form when an element gains one or more electrons.

Symbol         Cs⁺¹         SO₃⁻²

Valency           +1              -2

Formula of the compound is Cs₂SO₃.

Thus from the above conclusion we can say that Cesium Sulfite is formed from the Cs cation and the SO₃⁻² anion. The correct formula for this compound is Cs₂SO₃.

Learn more about the Cation and Anions here: https://brainly.com/question/20005547
#SPJ1

Which of the following is an oxidation-reduction reaction?
SO2(g) + H2O(l) Right arrow. H2SO3(aq)
CaCO3(s) Right arrow. CaO(s) + CO2(g)
Ca(OH)2(s) + H2CO3(l) Right arrow. CaCO3(aq) + 2H2O(l)
C6H12O6(s) + 6O2(g) Right arrow. 6CO2(g) + 6H2O(l)

Answers

B. The chemical reaction that represents oxidation - reduction reaction is CaCO3(s) → CaO(s) + CO2(g).

Oxidation reduction reaction

In oxidation reduction reaction, the oxidizing agent is reduced while reducing agent is oxidized.

In the chemical equation below;

CaCO3(s) → CaO(s) + CO2(g)

Calcium (ca) is oxidized calcium (II) ion while the carbon (IV) oxide is reduced carbon (IV) oxide.

Thus, the chemical reaction that represents oxidation - reduction reaction is CaCO3(s) → CaO(s) + CO2(g).

Learn more about oxidation reduction reaction here: https://brainly.com/question/4222605

#SPJ1

Answer: The answer is B

Explanation: on edge

Sulfur has an oxidation number of +6 in which two formulas?

A. SO₂ and SO4²-

B. H₂SO4 and SO₂

C. SO3 and SO4²-

D. HSO4- and S₂03²-

Answers

Answer:

[tex] \sf \blue{B. H_{2}SO4 \: and \: SO_{2}}[/tex]

Explanation:

As we know in oxidation, oxygen is added and hydrogen is reduced. And in option B, we can observe that is oxygen added +6. So, we conclude that option B is valid.

Hope it help you

Which halogen or halogen-containing compound is typically used as a form of topical antisepsis?

Answers

The halogen or halogen-containing compound is typically used as a form of topical antisepsis will be "iodophor".

Iodine will be employed as an antiseptic in the manner of a tincture of iodine, essentially an alcoholic solution.

Iodophor would be an iodine-containing solution that also contains a solubilizing agent, like povidone or a surfactant. Iodophor would be a common sanitizer in the dairy but also brewing sectors. Generally, a high molecular weight carrier, commonly a polymer, has been polymerized with iodine.

Therefore, the halogen or halogen-containing compound is typically used as a form of topical antisepsis will be "iodophor".

To know more about antisepsis

https://brainly.com/question/15186144

#SPJ4

Which statements describe band theory? Check all that apply.

Electrons all have approximately the same energy.

Electrons move among orbitals of different energies.

Electrons move freely among atoms (delocalized).

Answers

Answer:

b c

Explanation:

right

Answer:

it was A C for me

Explanation:

What is the change in entropy (AS) when a solid substance decomposes and
produces gaseous products?

Answers

Entropy directs to the degree of disorderliness in a system. Generally, solids have a greater degree of order when corresponded to gas in which the molecules/particles move randomly in all directions.

The transformation in entropy from solid to gaseous phase is a positive change. Because there is increase disorderliness of the system.

What is entropy definition?

A campfire is an illustration of entropy. The solid wood burns and becomes ash, smoke and gases, all of which applied energy outwards more efficiently than the solid fuel. Ice melting, salt or sugar dissolving, constructing popcorn and boiling water for tea are processed with growing entropy in your kitchen.

To learn more about Entropy, refer

https://brainly.com/question/6364271

#SPJ9

what discovery was found by Nels Bohr model of atom ?​

Answers

Answer:

What was Niels Bohr's most important discovery? Niels Bohr proposed a model of the atom in which the electron was able to occupy only certain orbits around the nucleus. This atomic model was the first to use quantum theory, in that the electrons were limited to specific orbits around the nucleus.

Explanation:

Subjects Of Study: atomic model

Other Questions
how do you find the area and perimeter Which study habit is NOT linked to procrastination How many parts is the adi granth divided into? a. 5 b. 4 c. 3 d. 2 In an environment of experimentation and spirited camaraderie, _________, the first _________ jazz style, was born. It changed jazz from popular dance music to intellectual art music. The sticky notes often have strings of characters written on them that appear to be passwords. What can you do to prevent the security risk that this practice presents Find the lateral surface area of thefollowing prism:5 cm5 cmapothem = 3.44 cmcm5 cm10 cm5 cmLSA = [?] cm2 List at least three kinds of harm a company could experience from electronic espionage or unauthorized viewing of confidential company materials. The three methods used to classify costs into their fixed and variable components includes. If you cross two pea plants, one with green peas and the other with yellow peas, and all of the offspring have yellow peas. You conclude? Tyler's playlist has 36 songs. Noahs playlist has one quarter as many songs as Tyler's playlist. How many songs are on Noahs playlist? will give brainliest!! One of the criticisms of the Social Readjustment Rating Scale is that it does NOT take into account: A super sundae ice cream cone has a radius of 0. 5 in and a depth of 4 in. A wonderful waffle cone has a radius 0. 9 in and a depth of 3 in. Which cone holds more ice cream? At a coffee shop, the manager recorded the number of customers who visited the store at the end of each hour. The graph shows the recordings for a 24-hour period. The function describing this graph is a transformation of the parent sine function, y=sin(x)Which value is closest to the amplitude of the transformed function?O 83 customersO 27 customersO 54 customersO 30 customers Prove by induction:5| (21^n+9) In Act III, scenes iii and iv of Romeo and Juliet, why does Nurse most likely go to see Friar Laurence and Romeo?because she is concerned about Juliets well-beingbecause she is angry at Romeo for killing Tybaltbecause she is worried about Romeos commitment to Julietbecause she is confused about Juliets whereabouts Dr. kellman finds a near-zero correlation between identical twins' scores on a measure of a personality trait. Dr. kellman will probably attribute variability in the trait to:_______ Laughter shook the general. "How extraordinarily droll you are!" he said. "One does not expect nowadays to find a young man of the educated class, even in America, with such a naive, and, if I may say so, mid-Victorian point of view. It's like finding a snuff-box in a limousine. Ah, well, doubtless you had Puritan ancestors. So many Americans appear to have had. I'll wager you'll forget your notions when you go hunting with me. You've a genuine new thrill in store for you, Mr. Rainsford.""Thank you, I'm a hunter, not a murderer.""The Most Dangerous Game,"Richard ConnellIn what way is Zaroff portrayed as Rainsfords foil?Zaroff is a strong hunter, and Rainsford is a weak one.Zaroff is a person without a conscience, but Rainsford has one. Zaroff is a considerate host, but Rainsford is an inconsiderate guest. ? QuestionDuring the Cold War, to which other country did the United States send trise of a communist government?Russia Hong KongKoreaJapan Which is the best definition of directional selection? a process by which two species can no longer reproduce a process by which one of the extreme variations of a trait is favored a process by which both extreme variations of a trait are favored a process by which average individuals in a population are favored