Answer:
Calcium fluoride (CaF2): 11.06 g
Dinitrogen monoxide (N2O): 2.08 g
Hydrogen fluoride (HF): 5.68 g
Water vapor (H2O): 8.52 g
Explanation:
We can start by writing the balanced chemical equation for the reaction:
3 Ca(NO3)2 + 10 NH4F → 6 HF + 3 CaF2 + N2O + 10 H2O
This equation tells us that 3 moles of calcium nitrate (Ca(NO3)2) react with 10 moles of ammonium fluoride (NH4F) to produce 3 moles of calcium fluoride (CaF2), 1 mole of dinitrogen monoxide (N2O), 6 moles of hydrogen fluoride (HF), and 10 moles of water (H2O).
We can use the molar masses of each substance to convert the given masses into moles, and then use the mole ratios from the balanced equation to determine the moles of each product formed. Finally, we can convert the moles of each product back into masses using their respective molar masses.
Molar masses:
Ca(NO3)2 = 164.1 g/mol
NH4F = 37.04 g/mol
CaF2 = 78.08 g/mol
N2O = 44.01 g/mol
HF = 20.01 g/mol
H2O = 18.02 g/molMasses given:
m(Ca(NO3)2) = 16.8 g
m(NH4F) = 17.50 g
Converting masses to moles:
n(Ca(NO3)2) = m(Ca(NO3)2) / M(Ca(NO3)2) = 16.8 g / 164.1 g/mol = 0.1022 mol
n(NH4F) = m(NH4F) / M(NH4F) = 17.50 g / 37.04 g/mol = 0.4729 mol
Using the mole ratios from the balanced equation, we can determine the number of moles of each product formed:
n(CaF2) = 3/10 * n(NH4F) = 0.1419 mol
n(N2O) = 1/10 * n(NH4F) = 0.0473 mol
n(HF) = 6/10 * n(NH4F) = 0.2837 mol
n(H2O) = 10/10 * n(NH4F) = 0.4729 mol
Finally, we can convert the moles of each product back into masses:
m(CaF2) = n(CaF2) * M(CaF2) = 0.1419 mol * 78.08 g/mol = 11.06 g
m(N2O) = n(N2O) * M(N2O) = 0.0473 mol * 44.01 g/mol = 2.08 g
m(HF) = n(HF) * M(HF) = 0.2837 mol * 20.01 g/mol = 5.68 g
m(H2O) = n(H2O) * M(H2O) = 0.4729 mol * 18.02 g/mol = 8.52 g
Therefore, the mass of each substance present after the reaction is:
Calcium fluoride (CaF2): 11.06 g
Dinitrogen monoxide (N2O): 2.08 g
Hydrogen fluoride (HF): 5.68 g
Water vapor (H2O): 8.52 g
You wish to extract solute X from water. Solute X is twice as soluble in diethyl ether as it is in methylene chloride
Which one do you choose?
Diethyl ether is the better solvent to extract solute X from water, and it is twice as soluble in diethyl ether as it is in methylene chloride.
In this given question, we have to extract solute X from water. It is given that solute X is twice as soluble in diethyl ether as it is in methylene chloride. Solute X is twice as soluble in diethyl ether as it is in methylene chloride. Therefore, we can say that diethyl ether is a better solvent as compared to methylene chloride to extract solute X from water. Solute X will dissolve more readily in diethyl ether than in methylene chloride.It means if we use diethyl ether to extract solute X from water, we will get a more pure solution of solute X as compared to the solution that we will get if we use methylene chloride as a solvent. Therefore, we should choose diethyl ether to extract solute X from water.
To learn more about Diethyl ether :
https://brainly.com/question/31112141
#SPJ11
add curved arrows to the reactant side to illustrate the movement of electrons in the e2 reaction shown.
The curved arrows are as follows: P(X = x) = (ⁿₓ)pˣ(1-p)ⁿ⁻ˣ
The reactants and products of E2 reaction are given. The curved arrow mechanism needed to be depicted. The electron movement happens in such a way so that the incoming base extracts a proton and the removal of leaving group takes place.
E2 reaction: It stands for elimination reaction following second order kinetics. In E2 reaction, the base abstracts the
hydrogen and removal of the leaving group simultaneously in the same step. A general mechanism is shown below:
(n-x)
Step: 1
The base is the hydroxyl ion and the leaving group is bromine as shown below:
P(X = x) = (ⁿₓ)pˣ(1-p)ⁿ⁻ˣ; here x=0,1,2,...,n for 0≤p≤1
The hydroxyl ion is the base since it has the ability to donate a pair of electrons. The bromine is the leaving group since it can accommodate the negative charge. Generally, halogens are good leaving groups because they can accommodate the negative charge due to their high electronegativity.
Step: 2
The curved arrows are as follows:
P(X = x) = (ⁿₓ)pˣ(1-p)ⁿ⁻ˣ
The movement of electrons is in such a way as shown above because the base present that is hydroxyl ion can accept proton. Therefore, it extracts a proton. In an E2 reaction, the leaving group is removed at the same time. Therefore, the bromide ion is removed as it can bear the negative charge.
Learn more about electrons here: brainly.com/question/28977387
#SPJ4
Complete question is attached below
A student sets up a titration with a * 1 point buret filled with 0.5 M NaOH. In the flask below they place the phenolphthalein indicator and 6.2 mL of the unknown acid. The solution in the beaker turns pink after exactly 24.8 mL of NaOH have been added. Find the exact concentration of the unknown acid.
Answer:
2.00 M
Explanation:
In a titration, we can determine the concentration of an unknown acid by adding a known concentration of a base, such as NaOH, until the reaction is complete. At the endpoint of the reaction, the amount of base added is equal to the amount of acid present in the sample.
From the problem, we know that the NaOH solution has a concentration of 0.5 M, and that 24.8 mL of NaOH is required to completely react with the unknown acid in the flask. We can use this information to calculate the number of moles of NaOH that were added:
moles of NaOH = concentration x volume
moles of NaOH = 0.5 mol/L x 0.0248 L
moles of NaOH = 0.0124 moles
Since the reaction is a neutralization reaction between an acid and a base, the number of moles of NaOH added is equal to the number of moles of acid in the flask. Therefore, we can calculate the concentration of the acid using the volume of acid added:
moles of acid = moles of NaOH
moles of acid = 0.0124 moles
volume of acid = 6.2 mL = 0.0062 L
concentration of acid = moles of acid / volume of acid
concentration of acid = 0.0124 moles / 0.0062 L
concentration of acid = 2.00 M
Therefore, the exact concentration of the unknown acid is 2.00 M.
solid magnesium aqueous hydrochloric acid aqueous magnesium chloride hydrogen gas balanced equation
Answer:
Mg (s) + 2 HCl (aq) → MgCl 2 (aq) + H 2 (g)
Explanation:
When a mineral breaks along a weekly bonded plane it is called
Answer: Cleavage
Explanation:
When a mineral breaks along a weekly bonded plane it is called cleavage
based on solubility rules, could you use fe(no3)3 rather than agno3 to determine the percent chloride in the unkown
No. According to solubility rule, we cannot use the Fe(NO3)3 rather than AgNO3 via analysis of precipitate of AgCl because no precipitate of cl- ion formed in Fe(NO3)3 .
A solubility chart having solubility rules is defined as a chart describing for different combinations of cations and anions whether the ionic compounds formed dissolve in or precipitate from a solution. This chart shows the solubility of various common ionic compounds in water, at a pressure of 1 atm. and under room temperature.
The following reactions are involved to determine Cl- concentration,
Case 1: Fe(NO3)3 (aq.) + Cl-(aq.) ----> FeCl3(aq.) + NO3-(aq.).
In this reaction involving aqueous solution of Fe(NO3)3 no precipitate of Cl- ion compound is formed .so this we can not use Fe(NO3)3 to determine %Cl- ion in solution.
Case 2 :
AgNO3(aq.) + Cl- (aq.) ---> AgCl(precipitate) + NO3-.
This reaction involving aqueous solution of AgNO3 can be use to determine %Cl- ion concentration in solution via analysis of precipitate of AgCl .
To learn more about Solubility Rule
https://brainly.com/question/15596863
#SPJ4
which of the following elements is the most difficult to ionize? select the correct answer below: fr h he xe
The He element is the one that is hardest to ionize.
The correct answer is He.
Why is it called elements?An object is categorised as an element if it cannot be reduced to a simpler form. It is possible to recognise them by their particular atomic number. The elements are organised into groups in the periodic table based on their atomic numbers, and those having related characteristics are underlined.
What components comprise the elements?An element is any substance made entirely of a certain type of atom, which are the building blocks of all matter. We know that each element is composed of protons, neutrons, and electrons. Some of the tiniest components in all of nature are these.
To know more about Elements visit:
https://brainly.com/question/14347616
#SPJ1
b) Verify by calculation what volume of the base it should take to neutralize 50.0 mL of 0.1 M HCl (aq)
with 0.1 M NaOH(aq).
Answer:
50 ml
Explanation:
n = moles
c = concentration
v = volume
n = c × v
HCl + NaOH --> NaCl + H2O
HCl:
50 ml = 50 cm³ = 0.05 dm³
n = 0.05 × 0.1
n = 0.005
Ratio of HCl to NaOH:
HCl : NaOH
Based on reaction equation:
1 : 1
0.005 : x
x = 0.005
NaOH:
0.005 = 0.1 × v
v = 0.05
0.05 dm³ = 50 cm³ = 50 ml
Given the following substrate and reaction conditions, what type of sustitution/elimination mechanisms is most favorable? SN1 OA OO ECDB OB Br CH3 SN2 B KOt-Bu t-BUOH E1 C E2 all of these
The type of substitution/elimination mechanism that is most favorable depends on the specific substrate and reaction conditions.
SN1 (Substitution Nucleophilic Unimolecular) mechanism is favored in the following conditions:
Tertiary or secondary substrate: Since the SN1 reaction involves a carbocation intermediate, a more stable carbocation will form more easily, which is possible with a tertiary or secondary substrate.
Polar protic solvent: A polar protic solvent stabilizes the carbocation intermediate and solvates the nucleophile.
Weak nucleophile: Since the carbocation intermediate is highly reactive, a weak nucleophile is preferred to avoid competing reactions that could produce alternative products.
SN2 (Substitution Nucleophilic Bimolecular) mechanism is favored in the following conditions:
Primary or methyl substrate: The SN2 reaction involves a one-step mechanism, where the nucleophile attacks the substrate as the leaving group departs. This mechanism is best suited to a primary or methyl substrate, where steric hindrance is minimal.
Polar aprotic solvent: A polar aprotic solvent is best suited to an SN2 reaction as it does not solvate the nucleophile as strongly, allowing it to react more easily.
Strong nucleophile: A strong nucleophile is preferred in an SN2 reaction since the nucleophile will be more effective in attacking the substrate.
E1 (Elimination Unimolecular) mechanism is favored in the following conditions:
Tertiary or secondary substrate: Since the E1 reaction involves a carbocation intermediate, a more stable carbocation will form more easily, which is possible with a tertiary or secondary substrate.
Polar protic solvent: A polar protic solvent stabilizes the carbocation intermediate.
Weak base: A weak base is preferred in an E1 reaction, as a strong base would favor an E2 reaction.
E2 (Elimination Bimolecular) mechanism is favored in the following conditions:
Primary or secondary substrate: E2 reaction requires that the substrate be in the anti-coplanar conformation, which is easier to achieve with a primary or secondary substrate.
Polar aprotic solvent: A polar aprotic solvent is preferred in an E2 reaction as it does not solvate the nucleophile as strongly, allowing it to react more easily.
Strong base: A strong base is preferred in an E2 reaction, as a weak base would favor an E1 reaction.
Based on the given substrate and reaction conditions, it is not possible to determine the most favorable substitution/elimination mechanism. Further information is needed about the substrate and reaction conditions to make a determination.
Learn more about elimination mechanism.
https://brainly.com/question/30545196
#SPJ4
If the mass of the gas in the preceding problem is
30.1 g
. what is the molar mass or molecular weight of the gas? Answer: At a fixed temperature and number of moles, the initial volume and pressure of a helium gas sample are
The mass of the gas in the preceding problem is 30.1 g.
To find the molar mass or molecular weight of the gas, we'll use the Ideal Gas Law, which is given as: PV = nRT where, P = pressure of the gas V = volume of the gas n = number of moles of the gas R = ideal gas constant T = temperature of the gas We can rewrite the Ideal Gas Law as: M = (mRT) / (PV) where, M = molar mass or molecular weight of the gas m = mass of the gas R = ideal gas constant T = temperature of the gas P = pressure of the gas V = volume of the gas Substituting the given values in the above formula, we get: M = (30.1 g x 0.0821 L atm mol-1 K-1 x 273 K) / (1 atm x 0.228 L)≈ 29.1 g/mol Hence, the molar mass or molecular weight of the gas is approximately 29.1 g/mol.
for more such questions on mass
https://brainly.com/question/86444
#SPJ11
Which of the following is the major organic product of the condensation of ammonia or a primary amine with the carbonyl group of an aldehyde or ketone?
Imine
The major organic product of the condensation of ammonia or a primary amine with the carbonyl group of an aldehyde or ketone is an imine.
A functional group or organic substance with a carbon-nitrogen double bond (C=N) is known as an imine. A hydrogen atom or an organic group may be joined to the nitrogen atom. (R). The carbon atom is connected to two more single bonds. Imines are present in numerous processes and are frequently found in manufactured and naturally occurring chemicals.
The five core atoms for ketimines and aldimines, C2C=NX and C(H)C=NX, respectively, are coplanar. The sp2-hybridization of the mutually double-bonded nitrogen and carbon atoms yields planarity. For nonconjugated imines, the C=N distance is 1.29-1.31, whereas for conjugated imines, it is 1.35. The C-N distances in amines and nitriles, on the other hand, are 1.47 and 1.16, respectively. Slow rotation occurs around the C=N bond. E- and Z-isomers were detected using NMR spectroscopy of aldimines have been detected. Owing to steric effects, the E isomer is favored.
An imine is formed when a primary amine reacts with a carbonyl group (C=O) of an aldehyde or ketone to form a new C-N bond. This reaction is known as a condensation reaction, as it involves the loss of a small molecule (e.g. water) to form the product.
For more such questions on condensation reaction , Visit:
https://brainly.com/question/1361341
#SPJ11
The correct questions is :
What is the major organic product of the condensation of ammonia or a primary amine with the carbonyl group of an aldehyde or ketone?
the calibration is to the 2ml so we do not estinate another digit what is the volume of the liquid in the cylinder
If calibration is to 2 ml, it means that cylinder is marked with calibration lines at every 2 ml interval. So, we can estimate the volume of liquid in the cylinder to the nearest 2 ml.
What is meant by calibration in chemistry?In chemistry, calibration is defined as the act of making sure that any scientific process/ instrument produce results which are accurate.
If calibration is to 2 ml, it means that cylinder is marked with calibration lines at every 2 ml interval. So, we can estimate the volume of liquid in the cylinder to the nearest 2 ml.
For example, if the bottom of the meniscus of liquid in the cylinder is at 6 ml mark and the top of the meniscus is between the 14 ml and 16 ml marks, we can estimate that the volume of liquid in cylinder is between 6 ml and 16 ml, but we cannot estimate a value in between such as 8 ml or 10 ml.
To know more about calibration, refer
https://brainly.com/question/30286269
#SPJ1
in 5 or more sentences why being able to reproduce scientific results is an important component of scientific research
Answer:
1. Reproducibility helps confirm the accuracy of research results.
2. It allows for further investigation of the same topic in different contexts.
3. Reproducibility provides assurance that the methods used were reliable.
4. It allows other researchers to build on the original research and expand upon it.
5. It allows for verification of the results and eliminates the possibility of data manipulation.
6. It helps make sure that the results are consistent and valid.
7. It enables more comprehensive understanding of the research topic.
8. It allows for the development of new theories and hypotheses based on the findings.
Conclusions
1. What conclusions can you draw about how temperature and salinity affect the flow of water Write an
evidence-based claim
Type your answer here:
I
2. Draw a diagram (develop a model) that shows what happens when warm water mixes with cold water in the
ocean. Use your model to explain how this causes ocean currents.
Type your answer here:
1. Temperature and salinity affect the flow of water in the ocean by creating density differences that drive ocean currents.
2. [image of warm and cold water mixing and creating a convection cell is mentioned below]
When warm water mixes with cold water in the ocean, a convection cell forms. Warm water rises and cold water sinks, which drives ocean currents. This process is influenced by other factors such as wind, Earth's rotation, and the shape of ocean basins.
What is density?
Density refers to the amount of mass per unit volume of water. At standard conditions (temperature of 4 degrees Celsius and pressure of 1 atmosphere), the density of pure water is approximately 1 gram per cubic centimeter (g/cm³). However, the density of water can vary depending on its temperature and salinity.
What is convection cell?
A convection cell is a circular pattern of fluid movement that arises when warm fluid rises and cold fluid sinks in a circular motion, creating a loop or cell. In the context of oceanography, convection cells can be formed when warm water rises and cold water sinks, either due to differences in temperature or salinity.
To know more about density, visit:
https://brainly.com/question/29775886
#SPJ1
What is the pH of a solution that has a hydronium ion concentration 100 times greater than a solution with a pH of 6?
2.
A square platinum sheet has sides 2.50 cm long and a thickness of 0.25 mm. What is th
volume of the platinum sheet (in cm³)?
(a) 16 cm³
(b) 630 cm³
(c) 0.16 cm³
(d) 160 cm³ 1
3.
A standard wine bottle has a volume of 750. mL. What volume, in liters, does this
represent?
(a) 0.750 L
(b) 0.00750 L
(c) 7.50 L
(d) 75.0 L
Answer: 2. The area of a square with sides 2.50 cm long is:
Area = side × side = 2.50 cm × 2.50 cm = 6.25 cm²
The thickness of the platinum sheet is 0.25 mm, which is equivalent to 0.025 cm.
Therefore, the volume of the platinum sheet is:
Volume = Area × thickness = 6.25 cm² × 0.025 cm = 0.15625 cm³
So, the volume of the platinum sheet is 0.15625 cm³.
Explanation: 3 To convert milliliters (mL) to liters (L), we need to divide the volume in milliliters by 1000.
So, to convert the volume of a wine bottle from 750 mL to liters, we can use the formula:
Volume in liters = Volume in milliliters ÷ 1000
Plugging in the values, we get:
Volume in liters = 750 mL ÷ 1000 = 0.75 L
Therefore, a standard wine bottle has a volume of 0.75 liters.
A natural gas tank is constructed so that the pressure remains constant. On a hot day when the temperature was 33°C, the volume of gas in the tank was determined to be 3000.0L. What would the volume be on a warm day when the temperature is 11°C? Name the law that is used to solve this problem.
The volume of the gas on a warm day when the temperature is 11 °C, given that the volume was initially 3000 L, is 2784.3 L
How do I determine the volume at 11 °C?The following data were obtained from the question:
Initial temperature (T₁) = 33 °C = 33 + 273 = 306 KInitial volume (V₁) = 3000 LitersNew temperature (T₂) = 11 °C = 11 + 273 = 284 KNew volume (V₂) =?We can obtain the volume of the gas on the warm day by using Charles' law equation. This is shown below:
V₁ / T₁ = V₂ / T₂
3000 / 306 = V₂ / 284
Cross multiply
306 × V₂ = 3000 × 284
306 × V₂ = 852000
Divide both side by 306
V₂ = 852000 / 306
V₂ = 2784.3 L
Thus, the volume on the warm day is 2784.3 L
Learn more about volume:
https://brainly.com/question/14560487
#SPJ1
18.35 mL of a solution of the acid H₂C₂O4 is titrated, and 58.20 mL of 0.4700-M NaOH is required to reach the equivalence point.
Calculate the original concentration of the acid solution.
The original concentration of the H₂C₂O4 solution is 0.7455 mol/L.
What is the original concentration of the acid solution?The balanced chemical equation for the reaction between H₂C₂O4 and NaOH is:
H₂C₂O4 + 2NaOH → Na₂C₂O₄ + 2H₂O
From this equation, we can see that the acid reacts with the base in a 1:2 ratio, meaning that one mole of H₂C₂O4 will react with two moles of NaOH.
To find the original concentration of the acid solution, we need to use the formula for calculating molarity:
Molarity = moles of solute / volume of solution (in liters)
We can start by calculating the number of moles of NaOH used in the titration:
moles of NaOH = Molarity x volume of NaOH used (in liters)
moles of NaOH = 0.4700 mol/L x 0.05820 L
moles of NaOH = 0.027354 moles
Since the acid and base react in a 1:2 ratio, we know that the number of moles of H₂C₂O4 is half the number of moles of NaOH used:
moles of H₂C₂O4 = 0.027354 moles / 2
moles of H₂C₂O4 = 0.013677 moles
Now we can use the formula for molarity to calculate the original concentration of the acid solution:
Molarity of H₂C₂O4 = moles of H₂C₂O4 / volume of H₂C₂O4 used (in liters)
Molarity of H₂C₂O4 = 0.013677 moles / 0.01835 L
Molarity of H₂C₂O4 = 0.7455 mol/L
Learn more about concentration here: https://brainly.com/question/26255204
#SPJ1
or the substituted cyclohexane compound shown, identify the atoms that are cis to the hydroxyl (oh) substituent.
The atoms that are cis to the hydroxyl (OH) substituent are the two carbon atoms in the ring that are directly adjacent to the OH group.
Cis-trans isomerism is a word used in chemistry that refers to the spatial arrangement of atoms within molecules. It is also known as geometric isomerism or configurational isomerism. The Latin prefixes "cis" and "trans" mean, respectively, "this side of" and "the other side of." Trans conveys that the functional groups (substituents) are on the opposite (transverse) sides of some plane, whereas cis implies that they are on the same side of some plane in the context of chemistry.
Cis-trans isomers are examples of stereoisomers, which are pairs of molecules with the same formula but distinct functional groups oriented in three dimensions. The absolute stereochemical explanation of E-Z isomerism does not necessarily equate to cis-trans notation.
The hydroxyl group (-OH) is attached to carbon number 1. The cis atoms are those that are attached to the same side of the ring. There are two atoms that are cis to the hydroxyl (OH) substituent, and these are atoms number 2 and 3. Therefore, the atoms that are cis to the hydroxyl (OH) substituent are atoms number 2 and 3 .
Thus, the cis to the hydroxyl (OH) is (B) 2 and 3.
For more such questions on Cis-trans , Visit:
https://brainly.com/question/13557044
#SPJ11
Calculate the mass of benzene that should be dissolved in 425g of water at 35°C to produce a
solution with a vapor pressure of 36.1 mmHg.
(At 35°C, P0H20 = 42.2mmHg)
The mass of benzene that should be dissolved in 425g of water at 35°C to produce a solution with a vapor pressure of 36.1 mmHg is 661.7 g.
What is the mass of dissolved benzene?This problem involves Raoult's law, which states that the vapor pressure of a solution is proportional to the mole fraction of the solvent in the solution.
Mathematically, Raoult's law is expressed as:
P = X_solvent * P0_solvent
where;
P is the vapor pressure of the solutionX_solvent is the mole fraction of the solvent, and P0_solvent is the vapor pressure of the pure solvent.To solve this problem, we need to first calculate the mole fraction of benzene that should be dissolved in water to produce a solution with a vapor pressure of 36.1 mmHg at 35°C.
We can use the following equation to calculate the mole fraction of benzene:
X_benzene = P / P0_benzene
X_benzene = 36.1 mmHg / 50.7 mmHg = 0.711
This means that for the given conditions, the mole fraction of benzene in the solution should be 0.711.
Next, we can use the mole fraction to calculate the mass of benzene that should be dissolved in 425g of water. We can assume that the total mass of the solution is 425g + mass of benzene.
Let's call the mass of benzene "m". The mole fraction of benzene is given by:
X_benzene = moles of benzene / (moles of benzene + moles of water)
Since we know the mass of water (425g), we can calculate the moles of water:
moles of water = mass of water / molar mass of water
where;
the molar mass of water is 18 g/mol. Plugging in the values, we get:moles of water = 425g / 18 g/mol = 23.61 moles
We can rearrange the equation for mole fraction to solve for the moles of benzene:
moles of benzene = X_benzene * (moles of benzene + moles of water)
moles of benzene = 0.711 * (moles of benzene + 23.61)
Solving for moles of benzene, we get:
moles of benzene = 8.48
Now we can use the mass of benzene and moles of benzene to calculate the molar mass of benzene:
molar mass of benzene = mass of benzene / moles of benzene
Solving for mass of benzene, we get:
mass of benzene = molar mass of benzene * moles of benzene
The molar mass of benzene is 78.11 g/mol. Plugging in the values, we get:
mass of benzene = 78.11 g/mol * 8.48 mol = 661.7 g
Learn more about mass of benzene here: https://brainly.com/question/30842938
#SPJ1
Determine whether each anion is basic or neutral. For those ions that are basic, write an equation that shows how the anion acts as a base. a. C7H5O2- b. I- c. NO3- d. F-
(a). C7H5O2- is basic. The anion can act as a base by accepting a proton (H+) from water, forming benzoic acid and hydroxide ion:
C7H5O2- + H2O ⇌ C7H6O2 (benzoic acid) + OH-
(b). I- is neutral. The anion does not have the ability to accept or donate protons.
(c). NO3- is neutral. The anion does not have the ability to accept or donate protons.
(d). F- is basic. The anion can act as a base by accepting a proton (H+) from water, forming hydrofluoric acid and hydroxide ion:
F- + H2O ⇌ HF (hydrofluoric acid) + OH-
What is benzoic acid ?
Benzoic acid is a white crystalline solid with the chemical formula C7H6O2. It is a carboxylic acid, which means it has a carboxyl group (-COOH) as its functional group. Benzoic acid is naturally occurring in many plants and fruits, and is used as a food preservative due to its antimicrobial properties. It is also used in the production of various chemicals and drugs, including benzoyl chloride, benzyl alcohol, and phenylbutazone.
To know more about benzoic acid, visit:
https://brainly.com/question/24052816
#SPJ1
Q10. Hydrocarbon molecules can react with halogens like Cl2 or Br2 (represented generically by X2) where C-H bonds are replaced by C-X bonds, forming HX molecules in the process. Balance the following chemical reaction and compute the estimated heat of reaction using the values above.
C3H8(g) + X2(g) → C3H2X6(g) + HX (g)
You are given the following average bond energies:
H-H 436 kJ/mol
H-X 431 kJ/mol
H-C 414 kJ/mol
C-X 339 kJ/mol
X-X 243 kJ/mol
Answer: To balance the given chemical equation, we can start by counting the number of atoms on both sides of the equation. We have 3 carbon atoms and 8 hydrogen atoms on the left side, and 3 carbon atoms, 6 X atoms, and 1 hydrogen atom on the right side.
C3H8(g) + X2(g) → C3H2X6(g) + HX(g)
To balance the equation, we can add a coefficient of 3 in front of HX on the product side:
C3H8(g) + X2(g) → C3H2X6(g) + 3HX(g)
Now, we have the same number of H atoms on both sides (8 H atoms on each side), and the equation is balanced.
To estimate the heat of reaction, we can use the bond energy values to calculate the energy required to break the bonds in the reactants and the energy released by forming the bonds in the products. We can then subtract the energy required to break the bonds from the energy released by forming the bonds to obtain an estimate of the heat of reaction.
Breaking bonds in the reactants:
3 C-H bonds × 414 kJ/mol = 1242 kJ/mol
1 X-X bond × 243 kJ/mol = 243 kJ/mol
Forming bonds in the products:
6 C-X bonds × 339 kJ/mol = 2034 kJ/mol
1 C-H bond × 414 kJ/mol = 414 kJ/mol
3 H-X bonds × 431 kJ/mol = 1293 kJ/mol
Estimated heat of reaction:
Energy released - energy required
(2034 kJ/mol + 414 kJ/mol + 1293 kJ/mol) - (1242 kJ/mol + 243 kJ/mol) = 2756 kJ/mol
Therefore, the estimated heat of reaction for the given chemical equation is 2756 kJ/mol. Note that this is only an estimate and actual experimental values may differ due to factors such as reaction conditions and the presence of catalysts.
An irregularly-shaped piece of aluminum (Al) has a mass of 56.4 grams. What is the volume in cm³ of this piece of aluminum if its density is 2.70 g/cm³?
The volume of the irregularly-shaped piece of aluminum is 20.89 cm³.
Calculation of volume?To calculate the volume of the irregularly-shaped piece of aluminum, we first need to calculate its density.
This is done by dividing the mass of the aluminum (56.4 grams) by its density (2.70 g/cm³).
That is
Volume = 56.4 grams/2.70 g/cm³
Volume = 20.89 cm³
This gives us a result of 20.89 cm³.
Density is a measure of mass per unit volume. It is typically expressed in units of grams per cubic centimeter (g/cm3). It is an intensive property, meaning that it is a physical property of a material that does not depend on the amount of the material present.
Learn more about density here:
https://brainly.com/question/26364788
#SPJ1
How do the number of collisions affect the size of the balloon?
Answer:
As the number of gas particles increases, the frequency of collisions with the walls of the container must increase. This, in turn, leads to an increase in the pressure of the gas. Flexible containers, such as a balloon, will expand until the pressure of the gas inside the balloon once again balances the pressure of the gas outside.
Explanation:
Using C2H4 + 3 O2 -> 2 CO2 + 2 H2O. If 20 moles of fuel are combusted in the above equation, how many moles of CO2 are produced?
Determine if the reactions are reversible or irreversible. Drag the appropriate items to their respective bins. Reset Help 2NaOH(aq) + H2SO. (aq) + Na SO.(aq) + 2H20(1) 4HCI(9) + O2(g) → 2H2O(g) + 2Cl(9) CO (9) + C(s) = 200 (9)
The reaction between 2NaOH (aq) and H2SO4 (aq) is reversible. The reaction between Na2SO4 (aq) and 2H2O (l) is irreversible. The reaction between 4HCl (g) and O2 (g) is irreversible. The reaction between CO2 (g) and C (s) is also irreversible.
In the first reaction, 2NaOH (aq) and H2SO4 (aq) react to form Na2SO4 (aq) and 2H2O (l). This reaction is reversible because it can be reversed to its original reactants, 2NaOH (aq) and H2SO4 (aq).
In the second reaction, Na2SO4 (aq) and 2H2O (l) react to form H2SO4 (aq) and 2NaOH (aq). This reaction is irreversible because the reactants cannot be reversed to their original form.
In the third reaction, 4HCl (g) and O2 (g) react to form 2H2O (g) and 2Cl (g). This reaction is also irreversible since the reactants cannot be reversed to their original form.
In the fourth reaction, CO2 (g) and C (s) react to form 2CO (g). This reaction is also irreversible since the reactants cannot be reversed to their original form.
For more such questions on reaction
https://brainly.com/question/29470602
#SPJ11
For the reaction, 2NO(g) + 2H2 (g) = N2 (g) 2H2O(g), it is determined that; at equilibrium at a particular temperature, the concentrations are as follows: [NO]-0.0081 M, [Hz]-4.1x 10-5 M [N2]= 5.3 x 10-2 M, and [H2O]-2.9 x I0-3M. Calculate the value of Keq and KP for this system at 298 K_
The equilibrium constant Keq is 640.86 and the equilibrium constant KP is 0.0198 for the given reaction at 298 K.
How do you calculate the values of Keq and KP for this system?The balanced chemical equation for the given chemical reaction is:
2NO(g) + 2H₂(g) ⇌ N₂(g) + 2H₂O(g)
where ⇌ indicates a state of equilibrium.
The equilibrium concentrations are:
[NO] = 0.0081 M
[H₂] = 4.1 × 10⁻⁵ M
[N₂] = 5.3 × 10⁻² M
[H₂O] = 2.9 × 10⁻³ M
The equilibrium constant, Keq, is given by:
Keq = [N₂][H₂O]² / [NO]²[H₂]²
Substituting the given values:
Keq = (5.3 × 10⁻²) (2.9 × 10⁻³)² / (0.0081)² (4.1 × 10⁻⁵)²
Keq = 640.86
The equilibrium constant in terms of partial pressures, KP, is related to Keq as follows:
KP = Keq(RT)^Δn
where R is the gas constant, T is the temperature in Kelvin, and Δn is the difference between the total number of moles of gaseous products and the total number of moles of gaseous reactants.
For the given reaction:
Δn = (1 + 2) − (2 + 2) = −1
Substituting the values:
KP = 640.86 (0.08206)(298)⁻¹
KP = 0.0198
Therefore, the equilibrium constant Keq is 640.86 and the equilibrium constant KP is 0.0198 for the given reaction at 298 K.
To know more about equilibrium constant, visit:
https://brainly.com/question/15118952
#SPJ1
a 0.100 mole sample of ethane, c2h6, contains which of these? hint: how many atoms are present in one c2h6 molecule?
0.100 mole sample of ethane contains approximately 1.204 x [tex]10^{24}[/tex] carbon atoms and 3.612 x [tex]10^{24}[/tex] hydrogen atoms.
What are the atoms?
In one molecule of ethane (C2H6), there are 2 carbon atoms and 6 hydrogen atoms.
To determine how many atoms are present in a 0.100 mole sample of ethane, we can use Avogadro's number, which relates the number of particles (in this case, molecules) to the amount of substance in moles. Avogadro's number is approximately 6.02 x [tex]10^{23}[/tex] particles per mole.
So, a 0.100 mole sample of ethane would contain:
0.100 x 6.02 x [tex]10^{23}[/tex]molecules of ethane2 x 0.100 x 6.02 x [tex]10^{23}[/tex] carbon atoms (since each ethane molecule contains 2 carbon atoms)6 x 0.100 x 6.02 x [tex]10^{23}[/tex] hydrogen atoms (since each ethane molecule contains 6 hydrogen atoms)Simplifying this expression, we get:
6.02 x [tex]10^{22}[/tex] molecules of ethane1.204 x [tex]10^{24}[/tex]carbon atoms (2 x 6.02 x [tex]10^{22}[/tex])3.612 x [tex]10^{24}[/tex] hydrogen atoms (6 x 6.02 x [tex]10^{22}[/tex])Therefore, a 0.100 mole sample of ethane contains approximately 1.204 x [tex]10^{24}[/tex] carbon atoms and 3.612 x [tex]10^{24}[/tex] hydrogen atoms.
To know more about ethane, visit:
https://brainly.com/question/8478519
#SPJ1
For the following reaction, which of the reactants would be the acid?
HNO2 ( aq ) + HS - ( aq ) → NO2 - ( aq ) + H2S ( aq )
Select one:
a.
HS -
b.
H2O
c.
NO2 -
d.
HNO2
(Chem 2 Quiz 3.1)
The acid in the reaction would donate a proton and that would be HNO2.
How do you know an acid in a reaction?An acid in a chemical reaction can be identified by the presence of hydrogen ions (H+): Acids are compounds that produce hydrogen ions when dissolved in water. In a chemical reaction, an acid may donate a hydrogen ion to another compound or accept a pair of electrons from a base.
When we look at the reaction, we can see that the specie that has given out the replaceable hydrogen ion is HNO2 thus it is the acid in the reaction.
Learn more about acid:https://brainly.com/question/14072179
#SPJ1
Draw a Lewis structure that obeys the octet rule for each of the following molecules and ions. In each case the first atom listed is the central atom.
a. POCl3, SO42−, XeO4, PO43−, ClO4−
b. NF3, SO32−, PO33−, ClO3−
c. ClO2−, SCl2, PCl2−
To draw a Lewis structure that obeys the octet rule for each of the molecules and ions listed, simply follow the steps outlined above and make sure that each atom has a formal charge of zero or close to zero.
For each of the molecules and ions listed, you can draw a Lewis structure that obeys the octet rule by following these steps:
1. Identify the central atom: The first atom listed in each molecule or ion is the central atom.
2. Count the number of valence electrons: Each atom has a certain number of valence electrons based on its position in the periodic table.
3. Form single bonds: Make single bonds between the central atom and each of the other atoms to use up the available valence electrons.
4. Add lone pairs: If the central atom still has electrons remaining, add lone pairs to satisfy the octet rule.
5. Check the formal charges: Make sure all atoms have formal charges of zero or close to zero.
Let's look at each molecule and ion individually:
a. POCl3, SO42−, XeO4, PO43−, ClO4−:
POCl3: The central atom is phosphorus (P) and it has 5 valence electrons. We form single bonds between the P atom and each of the other atoms, giving P a total of 8 electrons. The formal charge of each atom is zero.
SO42−: The central atom is sulfur (S) and it has 6 valence electrons. We form single bonds between the S atom and each of the other atoms, giving S a total of 8 electrons. The formal charge of each atom is zero.
XeO4: The central atom is xenon (Xe) and it has 8 valence electrons. We form single bonds between the Xe atom and each of the other atoms, giving Xe a total of 8 electrons. The formal charge of each atom is zero.
PO43−: The central atom is phosphorus (P) and it has 5 valence electrons. We form single bonds between the P atom and each of the other atoms, giving P a total of 8 electrons. The formal charge of each atom is zero.
ClO4−: The central atom is chlorine (Cl) and it has 7 valence electrons. We form single bonds between the Cl atom and each of the other atoms, giving Cl a total of 8 electrons. The formal charge of each atom is zero.
b. NF3, SO32−, PO33−, ClO3−:
NF3: The central atom is nitrogen (N) and it has 5 valence electrons. We form single bonds between the N atom and each of the other atoms, giving N a total of 8 electrons. The formal charge of each atom is zero.
SO32−: The central atom is sulfur (S) and it has 6 valence electrons. We form single bonds between the S atom and each of the other atoms, giving S a total of 8 electrons. The formal charge of each atom is zero.
PO33−: The central atom is phosphorus (P) and it has 5 valence electrons. We form single bonds between the P atom and each of the other atoms, giving P a total of 8 electrons. The formal charge of each atom is zero.
ClO3−: The central atom is chlorine (Cl) and it has 7 valence electrons. We form single bonds between the Cl atom and each of the other atoms, giving Cl a total of 8 electrons. The formal charge of each atom is zero.
c. ClO2−, SCl2, PCl2−:
ClO2−: The central atom is chlorine (Cl) and it has 7 valence electrons. We form single bonds between the Cl atom and each of the other atoms, giving Cl a total of 8 electrons. The formal charge of each atom is zero.
SCl2: The central atom is sulfur (S) and it has 6 valence electrons. We form single bonds between the S atom and each of the other atoms, giving S a total of 8 electrons. The formal charge of each atom is zero.
PCl2−: The central atom is phosphorus (P) and it has 5 valence electrons. We form single bonds between the P atom and each of the other atoms, giving P a total of 8 electrons. The formal charge of each atom is zero.
For more such questions on Lewis structure
https://brainly.com/question/20300458
#SPJ11