Boiling point = Normal boiling point + ΔT = 373 K + (3.71 g/180.16 g/mol) * (0.512 K/m) / (0.087 kg) = 374.12 K.
To calculate the boiling point of the solution, we'll first find the molality (m) of fructose.
Molality is defined as moles of solute per kilogram of solvent.
1. Calculate moles of fructose: (3.71 g) / (180.16 g/mol) = 0.0206 mol
2. Convert grams of water to kilograms: 87 g = 0.087 kg
3. Calculate molality: (0.0206 mol) / (0.087 kg) = 0.237 m
Next, we'll use the molality and the Kbp (0.512 K/m) to find the change in boiling point (ΔT).
4. Calculate ΔT: (0.237 m) * (0.512 K/m) = 0.121 K
Finally, add ΔT to the normal boiling point (373 K).
5. Boiling point = 373 K + 0.121 K = 374.12 K
The boiling point of the solution is 374.12 K, or approximately 101.0°C.
For more such questions on Boiling point, click on:
https://brainly.com/question/40140
#SPJ11
The boiling point of the solution would be 100.34°C.
To calculate the boiling point elevation, we can use the formula:
ΔTb = Kbp x molality
where ΔTb is the boiling point elevation, Kbp is the boiling point elevation constant of the solvent, and molality is the concentration of the solution in terms of moles of solute per kilogram of solvent.
First, we need to calculate the molality of the solution. We know the mass of fructose (3.71 g) and the mass of water (87 g). We can convert the mass of fructose to moles by dividing by its molar mass:
moles of fructose = 3.71 g / 180.16 g/mol = 0.0206 mol
Then, we can calculate the molality:
molality = moles of fructose / mass of water in kg
molality = 0.0206 mol / 0.087 kg = 0.237 mol/kg
Now we can calculate the boiling point elevation:
ΔTb = Kbp x molality
ΔTb = 0.512 K/m x 0.237 mol/kg = 0.1216 K
Finally, we can calculate the boiling point of the solution:
Boiling point of solution = normal boiling point of solvent + ΔTb
Boiling point of solution = 373 K + 0.1216 K = 373.12 K
We can convert the boiling point to Celsius by subtracting 273.15:
Boiling point of solution = 373.12 K - 273.15 = 100.34°C
Therefore, the boiling point of the solution is 100.34°C.
Learn more about mol/kg here:
https://brainly.com/question/21151096
#SPJ11
T/F. oxygen debt refers to the oxygen required to make creatine phosphate
The statement is False. Oxygen debt refers to the oxygen required to restore metabolic processes back to their resting state after exercise, not to make creatine phosphate.
During exercise, the body's muscles require more energy than can be supplied by aerobic metabolism alone. As a result, the muscles switch to anaerobic metabolism, which produces lactic acid as a byproduct. Lactic acid can build up in the muscles, causing fatigue and limiting exercise performance.
After exercise, the body needs to restore the metabolic processes back to their resting state, which requires oxygen. This oxygen is used to convert the accumulated lactic acid back into glucose through a process called the Cori cycle. This process is what is known as oxygen debt, and it can persist for several minutes or even hours after exercise has stopped.
Creatine phosphate, on the other hand, is a high-energy molecule that can be used to regenerate ATP, the primary energy source for muscle cells. While the production of creatine phosphate does require oxygen, it is not directly related to oxygen debt, which is focused on restoring the body's metabolic processes back to their resting state after exercise.
To learn more about Cori cycle click here : brainly.com/question/14318858
#SPJ11
Pre-lab information
purpose plan an investigation to explore the relationship between properties of substances and the electrical forces within those substances. time approximately 50 minutes question what can properties of substances tell us about the electrical forces within those substances? summary in this activity, you will plan and conduct an investigation to compare a single property across several substances. you must select a measurable property, such as boiling point or surface tension. after your investigation, you will compare the results and use your data to make inferences about the strength of the electrical forces in each substance you tested.
The purpose of this pre-lab activity is to design and carry out an investigation to examine the correlation between the properties of substances and the electrical forces within them.
The main objective of this pre-lab activity is to explore the relationship between the properties of substances and the electrical forces within those substances. To achieve this, students will need to plan and conduct an investigation where they compare a single property across different substances.
This property could be something like boiling point or surface tension, as long as it is a measurable characteristic. By collecting data on the chosen property for each substance and analyzing the results, students will be able to make inferences about the strength of the electrical forces present in each substance.
This investigation allows students to understand how different properties of substances can provide insights into the underlying electrical forces that govern their behaviour. It provides a hands-on opportunity to apply scientific methods and draw conclusions based on empirical evidence. The expected time for completing this activity is approximately 50 minutes.
Learn more about boiling point here:
https://brainly.com/question/2153588
#SPJ11
electrolysis of an nacl solution with a current of 2.02 a for a period of 203 s produced 59.3 ml of cl2 at 652 mmhg and 27 ∘c . calculate the value of the faraday from these data.2.00 A * 200 s = 400CN = P1V1RTN= (650/760) (.0596L)/ (.0821 L*ATM/Mol*K ) (300K)N=.00207mol Cl.00207 * 2 = .004139 Cl2400C /.004139 mol = 96638 Faraday
Therefore, the value of the Faraday from these data is approximately 96,638 Faraday.
Based on the information provided, the electrolysis of an NaCl solution with a current of 2.02 A for a period of 203 s produced 59.3 mL of Cl2 at 652 mmHg and 27 °C. To calculate the value of the Faraday from these data, we can use the following equation:
Faraday = (number of moles of Cl2 produced) / (amount of charge passed)
First, we need to determine the number of moles of Cl2 produced. We can use the ideal gas law to do this:
PV = nRT
where P is the pressure in atm, V is the volume in L, n is the number of moles, R is the gas constant (0.0821 L*atm/mol*K), and T is the temperature in Kelvin.
Converting the given pressure of 652 mmHg to atm and the given volume of 59.3 mL to L, we have:
P = 652 mmHg / 760 mmHg/atm = 0.858 atm
V = 59.3 mL / 1000 mL/L = 0.0593 L
T = 27 + 273 = 300 K
Substituting these values into the ideal gas law equation, we get:
n = (P * V) / (R * T)
n = (0.858 atm * 0.0593 L) / (0.0821 L*atm/mol*K * 300 K)
n = 0.00207 mol Cl2
Next, we need to calculate the amount of charge passed in Coulombs (C). We can use the formula:
Q = I * t
where Q is the amount of charge, I is the current in amperes, and t is the time in seconds.
Substituting the given values, we get:
Q = 2.02 A *203 s
Q = 410.06 C
Finally, we can calculate the value of the Faraday using the equation mentioned earlier:
Faraday = (number of moles of Cl2 produced) / (amount of charge passed)
Faraday = 0.00207 mol / 410.06 C
Faraday = 0.000005055 mol/C = 96,638 Faraday (rounded to the nearest whole number)
Therefore, the value of the Faraday from these data is approximately 96,638 Faraday.
From the given data, electrolysis of an NaCl solution with a current of 2.02 A for 203 seconds produced 59.3 mL of Cl2 at 652 mmHg and 27°C. To calculate the value of Faraday, we can follow these steps:
1. Calculate the total charge passed: 2.02 A * 203 s = 410.06 C
2. Convert pressure, volume, and temperature to appropriate units and apply the ideal gas law to find moles of Cl2 produced:
N = (P1V1)/(RT) = (652/760 atm) * (0.0593L) / (0.0821 L*atm/mol*K) * (300K) = 0.00211 mol Cl2
3. Calculate the moles of electrons transferred (2 electrons per mole of Cl2):
0.00211 mol Cl2 * 2 = 0.00422 mol of electrons
4. Determine the value of Faraday using the total charge and moles of electrons:
Faraday = 410.06 C / 0.00422 mol = 97200 C/mol (approximately)
So, the value of Faraday from these data is approximately 97200 C/mol.
To know more about Faraday visit:-
https://brainly.com/question/31604460
#SPJ11
use the y-intercept from the best fit line to determine an experimental value for the radius of curvature r of your mirror:
To determine an experimental value for the radius of curvature r of a mirror using the y-intercept from the best fit line, one can use the equation y = mx + b, where b is the y-intercept and r = 2b.
The y-intercept of a best fit line represents the point where the line intersects the y-axis. In the context of a mirror, this point represents the distance between the center of curvature and the mirror's vertex. Therefore, if we know the y-intercept of the best fit line, we can use it to determine the radius of curvature.
To do this, we can use the formula for the equation of a straight line, y = mx + b, where m is the slope of the line and b is the y-intercept. Since the y-intercept represents half the distance between the mirror and the center of curvature, we can calculate the radius of curvature by multiplying the y-intercept by 2, i.e., r = 2b.
For more questions like Distance click the link below:
https://brainly.com/question/15172156
#SPJ11
An aqueous buffer solution contains only HCN (PK, = 9.31) and KCN and has a pH of 8.50. What can be concluded about the relative concentrations of HCN and KCN in the buffer? (A) [HCN]> [KCN] (B) [HCN]< [KCN] (C) [HCM] = [KCN] (D) nothing can be concluded about the relative concentrations
An aqueous buffer solution contains only HCN (PK, = 9.31) and KCN and has a pH of 8.50, then [HCN]< [KCN] is the relative concentrations. Therefore, the correct option is option B.
Concentration in chemistry is calculated by dividing a constituent's abundance by the mixture's total volume. Mass concentration, molar concentration, number concentration, and volume concentration are four different categories of mathematical description. Any type of chemical mixture can be referred to by the term "concentration," however solutes and solvents in solutions are most usually mentioned. There are different types of molar (quantity) concentration, including normal concentration and osmotic concentration.
pH = pKa + log([KCN]/[HCN])
8.50 = 9.31 + log([KCN]/[HCN])
log([KCN]/[HCN]) = -0.81
[KCN]/[HCN] = 0.115
To know more about concentration, here:
https://brainly.com/question/29842026
#SPJ12
An excess of finely divided iron is stirred up with a solution that contains Cu2+ ion, and the system is allowed to come to equilibrium. The solid materials are then filtered off, and electrodes of solid copper and solid iron are inserted into the remaining solution. What is the value of the ratio [Fe2+][Cu2+] at 25°C?
The value of the ratio [tex][Fe2+]/[Cu2+][/tex] at equilibrium in a system where finely divided iron is stirred with a [tex]Cu2+[/tex] solution and electrodes are inserted, can be calculated using the equilibrium constant and the Nernst equation.
EquilibriumThe given system involves the reaction between iron (Fe) and copper ions (Cu2+) in an aqueous solution:
[tex]Fe(s) + Cu2+(aq) \leftrightharpoons Fe2+(aq) + Cu(s)[/tex]
Initially, excess finely divided iron is added to the solution, which causes the formation of [tex]Fe2+[/tex] ions as the iron reacts with [tex]Cu2+[/tex] ions in the solution. The system then reaches equilibrium, and the remaining solid materials are filtered off.
When electrodes of solid copper and solid iron are inserted into the remaining solution, the following reactions occur:
At the cathode (solid copper electrode):
[tex]Cu2+(aq) + 2e- \rightarrow Cu(s)[/tex]
At the anode (solid iron electrode):
[tex]Fe(s) \rightarrow Fe2+(aq) + 2e-[/tex]
The overall reaction is the same as the original reaction:
[tex]Fe(s) + Cu2+(aq) \rightleftharpoons Fe2+(aq) + Cu(s)[/tex]
At equilibrium, the rate of the forward reaction is equal to the rate of the reverse reaction. This means that the concentrations of the reactants and products remain constant. We can use the equilibrium constant expression, K, to relate the concentrations of the species in the equilibrium:
[tex]K = [Fe2+][Cu(s)] / [Fe(s)][Cu2+][/tex]
At equilibrium, the concentration of solid copper (Cu(s)) is constant and can be considered as 1. The concentration of solid iron (Fe(s)) is not included in the expression since it is not in the solution. Therefore, we can simplify the expression as:
[tex]K = [Fe2+]/[Cu2+][/tex]
To determine the value of K at 25°C, we need to look up the standard reduction potentials of the [tex]Cu2+/Cu[/tex] and [tex]Fe2+/Fe[/tex] half-reactions:
[tex]Cu2+(aq) + 2e- \rightarrow Cu(s) E ^{\circ}= +0.34 V[/tex]
[tex]Fe2+(aq) + 2e- \rightarrow Fe(s) E ^{\circ} = -0.44 V[/tex]
The overall cell potential (E°cell) can be calculated as the difference between the two half-cell potentials:
[tex]E^{\circ}cell = E^{\circ}(cathode) - E^{\circ}(anode) = +0.34 V - (-0.44 V) = +0.78 V[/tex]
Since the cell potential is positive, the reaction is spontaneous in the forward direction [tex](Fe(s) + Cu2+(aq) \rightarrow Fe2+(aq) + Cu(s))[/tex].
We can use the Nernst equation to relate the cell potential to the concentrations of the species in the solution:
[tex]Ecell = E^{\circ}cell - (RT/nF) ln Q[/tex]
where
R is the gas constant, T is the temperature in Kelvin, n is the number of electrons transferred in the reaction (2 in this case), F is the Faraday constant, and Q is the reaction quotient.At equilibrium, Q = K, so we can rearrange the equation as:
[tex]K = exp((E^{\circ}cell - Ecell) \times nF/RT)[/tex]
Substituting the values:
E°cell = +0.78 Vn = 2F = 96,485 C/molR = 8.314 J/mol-KT = 298 KWe get:
[tex]K = exp((0.78 - Ecell) \times 2 \times 96485 / (8.314 \times 298))[/tex]
To find Ecell, we need to calculate the reduction potential of Fe2+/Fe at the working electrode (solid iron electrode). This can be done by adding the reduction potential of Fe2+/Fe to the voltage drop between the two electrodes:
[tex]Ecell = E(Fe2+/Fe) + (V($working electrode) - V[/tex]
Learn more about equilibrium: brainly.com/question/517289
#SPJ11
3.43 without referring to a pka table, determine if water is a suitable proton source to protonate the following compound. explain why or why not.
In order to determine if water is a suitable proton source to protonate the given compound, we need to compare the pka values of the two species. The pka value of water is 15.7, while the pka value of the given compound is not provided. However, we can make an estimate based on the functional groups present in the compound.
If the compound contains a strong acid group with a low pka value (such as a carboxylic acid or a phenol), water would not be a suitable proton source as the compound would be more acidic and would not accept a proton from water. However, if the compound contains a weaker acid group (such as an alcohol or an amine), water could potentially be a suitable proton source.
Assuming that the compound contains a weaker acid group, we need to compare its pka value to that of water. A difference in pka values of more than 4 units indicates that the proton transfer reaction is unfavorable. In this case, the difference in pka values between water and the compound is greater than 12 units, indicating that water is a highly unsuitable proton source.
Therefore, based on the large difference in pka values, we can conclude that water is not a suitable proton source to protonate the given compound. The compound is likely too basic to be protonated by water.
For more such question on pka values
https://brainly.com/question/31962641
#SPJ11
write equations showing how each weak base ionizes water to form oh-. also write the corresponding expression for kb.
[tex]Ca(OH)_{2}[/tex] (s) → [tex]Ca_{2}[/tex]+ (aq) + 2OH- (aq). Therefore, it does not have a Kb expression.
When a weak base dissolves in water, it reacts with water molecules to form hydroxide ions (OH-) and its conjugate acid. The general equation for this reaction is:
B (aq) +[tex]H_{2}O[/tex] (l) ⇌ BH+ (aq) + OH- (aq)
The equilibrium constant expression for this reaction is called the base ionization constant (Kb), which is given by:
Kb = [BH+][OH-] / [B]
Where [BH+] represents the concentration of the conjugate acid, [OH-] represents the concentration of the hydroxide ions, and [B] represents the concentration of the weak base.
For example, ammonia ([tex]NH_{3}[/tex]) is a weak base that reacts with water to form hydroxide ions and its conjugate acid:
[tex]NH_{3}[/tex] (aq) + H2O (l) ⇌ [tex]NH_{4}[/tex]+ (aq) + OH- (aq)
The Kb expression for this reaction is:
Kb = [[tex]NH_{4+}[/tex]][OH-] / [[tex]NH_{3}[/tex]]
In contrast, calcium hydroxide ([tex]Ca(OH)_{2}[/tex]) is a strong base that ionizes completely in water to form hydroxide ions:
[tex]Ca(OH)_{2}[/tex] (s) → [tex]Ca_{2}[/tex]+ (aq) + 2OH- (aq)
Therefore, it does not have a Kb expression.
To know more about conjugate acid, refer here:
https://brainly.com/question/31229565#
#SPJ11
how many moles of electrons must be transferred through a cell in order to accumulate a total charge of 70,500 c?
0.731 moles of electrons must be transferred through the cell to accumulate a total charge of 70,500 C.
The amount of charge (Q) that passes through a cell is directly proportional to the number of moles of electrons (n) transferred, as well as the Faraday constant (F). The Faraday constant represents the charge carried by one mole of electrons, and its value is 96,485 C/mol.
Thus, the number of moles of electrons transferred can be calculated using the formula:
n = Q / F
Plugging in the given values, we get:
n = 70,500 C / 96,485 C/mol
n = 0.731 moles of electrons
For more question electrons visit:
https://brainly.com/question/26084288
#SPJ11
5.0 mL sample of hydrogen gas is collected at a pressure of 97.5 kPa when the temperature is 18°C. Calculate the volume this gas would occupy at STP in Liters.
STP stands for Standard Temperature and Pressure. This means that the temperature is 0°C and the pressure is 101.3 kPa = 1 atm.
2. (11 pts) Balance the following equation: _____ H2 + _____ N2 → _____NH3
A. Whattypeofreactionisthis?________________________
B. Arethenumberofmolesconservedinthebalancedequation?Justifyyourreasoningin complete sentences.
C. Howdoesthebalancedequationsupportthelawofconservationofmass,ingrams?Justify your reasoning in complete sentences.
D. Howmanymolesofammonia(NH3)canbeproducedfromthereactionof4.0litersofhydrogen at 50.0oC and 1.2atm of pressure with excess nitrogen?
Ans to 2D: _____________________
Standard Pressures: 1 atm = 760 torr = 760 mmHg = 101.3 kPa = 101,300 Pa = 14.7 psi
Water Vapor Pressure Table
TP (°C) (mmHg)
TP (°C) (mmHg)
TP (°C mmHg)
0.0 4.6
5.0 6.5 10.0 9.2 12.5 10.9 15.0 12.8 15.5 13.2 16.0 13.6 16.5 14.1 17.0 14.5 17.5 15.0 18.0 15.5 18.5 16.0 19.9 16.5
19.5 17.0 20.0 17.5 20.5 18.1 21.0 18.6 21.5 19.2 22.0 19.8 22.5 20.4 23.0 21.1 23.5 21.7 24.0 22.4 24.5 23.1 25.0 23.8 26.0 25.2
27.0 26.7 28.0 28.3 29.0 30.0 30.0 31.8 35.0 42.2 40.0 55.3 50.0 92.5 60.0 149.4 70.0 233.7 80.0 355.1 90.0 525.8 95.0 633.9
100.0 760.0
3. (8 pts) Ammonium nitrite decomposes to give off nitrogen gas and liquid water. How many grams of ammonium nitrite must have reacted if 2.58 L of gas was collected over water in a gas collecting tube at 21.0oC and 97.8 kPa?
Balanced equation: _______________________________________________________________
Ans to 3: _________________
(6 pts) Will the volume of nitrogen (from the previous problem) INCREASE, DECREASE or remain the SAME if... *Explain briefly*
A. ...the experiment is done at significantly higher temperature? __________
B. ...the amount of ammonium nitrite was increased? __________
C. ...the experiment was not collected over water? __________
4. (10 pts) 900.0 mL of 3.00M phosphoric acid, H3PO4, reacts with 235 grams of iron (III) carbonate. Balanced Equation: Fe2(CO3)3 + 2H3PO4 → 2FePO4 + 3H2O + 3CO2
a. Determine the limiting reactant. Show all work!
Ans to 4a: _________________
b. How many milliters of carbon dioxide gas can be produced at 78°C at 45.5 psi pressure with 900.0 mL of 3.00M phosphoric acid and 235 grams of iron (III) carbonate?
Ans to 4b: _________________
1. To find the volume of a gas at STP, we can use the ideal gas law, which is an equation that relates the pressure, volume, temperature and amount of a gas. The equation is:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles, R is the gas constant and T is the temperature.
We can rearrange this equation to find V:
V = nRT/P
We need to make sure that we use consistent units for P, V, T and R. Since we are given P in kPa and T in °C, we can use R = 8.31 J/(K⋅mol) and convert T to K by adding 273.15.
We also need to find n, which is the number of moles of hydrogen gas. We can use the molar mass of hydrogen, which is 2.02 g/mol, to convert the given mass of 5.0 mL to moles. Since 1 mL of gas at STP has a mass of 0.0899 g, we have:
5.0 mL × 0.0899 g/mL ÷ 2.02 g/mol = 0.00222 mol
Now we can plug in the values into the equation for V:
V = (0.00222 mol)(8.31 J/(K⋅mol))(273.15 + 18) K / (97.5 kPa)
V = 0.00507 m^3
To convert m^3 to L, we multiply by 1000:
V = 5.07 L
Therefore, the volume of hydrogen gas at STP is about 5.07 L.
2. To balance the equation for the reaction of hydrogen and nitrogen to form ammonia, we need to make sure that the number of atoms of each element is equal on both sides of the equation. We can do this by adjusting the coefficients (the numbers in front of each compound) until they match.
One possible way to balance the equation is:
3H2 + N2 → 2NH3
A. This type of reaction is called a synthesis reaction or a combination reaction, because two or more substances combine to form a single product.
B. The number of moles are conserved in the balanced equation, because there is no change in the total number of molecules involved in the reaction. According to the balanced equation, three moles of hydrogen react with one mole of nitrogen to produce two moles of ammonia.
C. The balanced equation supports the law of conservation of mass, which states that mass cannot be created or destroyed in a chemical reaction. According to the balanced equation, the total mass of the reactants is equal to the total mass of the product, because each atom has a fixed mass and no atoms are lost or gained in the reaction.
D. To find how many moles of ammonia can be produced from 4.0 liters of hydrogen at 50°C and 1.2 atm of pressure with excess nitrogen, we need to use the ideal gas law again to find how many moles of hydrogen are present:
PV = nRT
n = PV/RT
n = (1.2 atm)(4.0 L) / ((0.082 L⋅atm)/(K⋅mol))(273 + 50) K)
n = 0.19 mol
Since we have excess nitrogen, hydrogen is the limiting reactant, meaning that it will be completely consumed in the reaction and determine how much ammonia can be produced.
According to the balanced equation, three moles of hydrogen produce two moles of ammonia, so we can use this ratio to find how many moles of ammonia are produced from 0.19 mol of hydrogen:
(2 mol NH3 / 3 mol H2) × 0.19 mol H2 = 0.13 mol NH3
Therefore, about 0.13 moles of ammonia can be produced from 4.0 liters of hydrogen at 50°C and 1.2 atm with excess nitrogen.
In a lithium-iodine cell, 2 atoms of Li are oxidized to 2 Li+ ions and l2 is reduced to 2 write the oxidation and reduction half-reactions that take place in this cell
In a lithium-iodine cell, the oxidation half-reaction involves the oxidation of 2 lithium atoms (Li) to form 2 lithium ions (Li+), while the reduction half-reaction involves the reduction of iodine (I2) to form 2 iodide ions (I-).
In the lithium-iodine cell, the lithium metal acts as the anode, where oxidation occurs, while iodine acts as the cathode, where reduction takes place.
The oxidation half-reaction involves the loss of electrons by lithium atoms, leading to the formation of lithium ions. The balanced oxidation half-reaction is as follows:
2Li -> 2Li+ + 2e-
On the other hand, the reduction half-reaction involves the gain of electrons by iodine molecules, resulting in the formation of iodide ions. The balanced reduction half-reaction is as follows:
I2 + 2e- -> 2I-
Overall, when the two half-reactions are combined, the electrons cancel out, and the lithium ions and iodide ions combine to form lithium iodide (LiI):
2Li + I2 -> 2LiI
In the lithium-iodine cell, these oxidation and reduction half-reactions occur simultaneously, facilitating the flow of electrons and the generation of electrical energy.
Learn more about oxidation half-reaction here:
https://brainly.com/question/13977994
#SPJ11
using the data in the table, calculate the rate constant of this reaction. a b⟶c d trial [] () [] () rate (m/s) 1 0.310 0.240 0.0198 2 0.310 0.624 0.134 3 0.465 0.240 0.0297
The rate constant of the reaction was determined to be approximately 0.1112 m/s.
To calculate the rate constant, we need to use the rate equation and the initial concentrations of the reactants.
The rate equation for the reaction is given by Rate = k[A]^m[B]^n, where k is the rate constant, [A] and [B] are the concentrations of reactants A and B, and m and n are the reaction orders with respect to A and B, respectively.
Analyzing the given data, we can determine the reaction orders.
By comparing the rates of different trials, we find that the reaction is first order with respect to reactant A and first order with respect to reactant B.
Using Trial 1, we can set up the rate equation as:
Rate1 = k[A]1^1[B]1^1
0.0198 = k(0.310)(0.240)
Solving this equation, we find that k ≈ 0.1112. Therefore, the rate constant for the reaction is approximately 0.1112 m/s.
The rate constant represents the proportionality constant between the concentrations of reactants and the rate of the reaction.
It indicates how quickly the reaction proceeds at a particular temperature. In this case, the rate constant value of 0.1112 m/s suggests that the reaction proceeds at a moderate rate.
The specific units of the rate constant depend on the overall order of the reaction, which can be determined by summing the individual reaction orders for each reactant.
Learn more about rate constant here:
https://brainly.com/question/20305922
#SPJ11
discuss the enthalpy and entropy contribution to ∆godiss for acetic acid and monochloroacetic acids.
The ∆godiss for acetic acid and monochloroacetic acid is determined by both the enthalpy and entropy contribution.
The enthalpy (∆H) contribution to ∆godiss is due to the energy absorbed or released during the breaking or forming of bonds between the molecules. The entropy (∆S) contribution is due to the degree of randomness or disorder in the system.
For acetic acid, the enthalpy contribution to ∆godiss is negative due to the release of energy during the formation of the hydrogen bond between the carboxyl group and the hydroxyl group. The entropy contribution is also negative due to the decrease in the degree of randomness when the molecules come together to form a solid.
For monochloroacetic acid, the enthalpy contribution is also negative due to the formation of the hydrogen bond and the dipole-dipole interaction between the chlorine atom and the carbonyl group. However, the entropy contribution
To know more about monochloroacetic acid refer here:
https://brainly.com/question/31761018#
#SPJ11
2.67 • which is a bond-line drawing of (ch3)2chch2oc(ch3)3?
The bond-line drawing of (CH3)2CHCH2OC(CH3)3 is:
markdown
Copy code
CH3
|
CH3--CH--CH2--O--C(CH3)3
|
CH3
In this molecule, there are two methyl (CH3) groups attached to the first carbon atom (C1), which is also attached to another carbon atom (C2) through a single bond. The C2 atom is attached to a CH2 group and an oxygen atom (O) through single bonds. The oxygen atom (O) is attached to a carbon atom (C3) of the (CH3)3C group through a single bond.
The (CH3)3C group has three methyl (CH3) groups attached to the central carbon atom (C3). The bond-line drawing shows all the bonds between atoms and the arrangement of atoms in the molecule in a simplified way, where each line represents a single bond between two atoms and the carbon and hydrogen atoms are not explicitly shown.
For more such questions on bond-line
https://brainly.com/question/13939420
#SPJ11
The bond line diagram of the compound can be shown by option D
What is a bond line drawing of a compound?
Bond line drawings, sometimes referred to as skeletal formulas or line-angle formulas, are a streamlined method of illustrating a compound's structure. The connection of the atoms of a molecule is frequently represented in organic chemistry using this technique.
The atoms are represented in a bond line drawing by their chemical symbols, and the bonds separating them are shown as lines.
Learn more about a bond line diagram:https://brainly.com/question/29835275
#SPJ1
What is the ph of a solution containing .12mol/l nh4cl and .03mol/l naoh?
To determine the pH of the solution, we first need to calculate the concentration of the resulting solution after the reaction between NH4Cl and NaOH.
The balanced chemical equation for the reaction is:
NH4Cl + NaOH → NaCl + NH3 + H2O
From the equation, we can see that NH4Cl reacts with NaOH to form NaCl, NH3, and H2O.
The NH3 produced will react with water to form NH4+ and OH- ions. Therefore, the resulting solution will contain NH4+, Cl-, Na+, and OH- ions.
To calculate the concentration of NH4+ and OH- ions, we need to use the following equations:
[tex]NH4Cl → NH4+ + Cl-[/tex]
[tex]NaOH → Na+ + OH-[/tex]
The NH4+ and OH- ions will react according to the following equation:
[tex]NH4+ + OH- → NH3 + H2O[/tex]
We can use the initial concentrations of NH4Cl and NaOH to calculate the concentration of NH4+ and OH- ions in the resulting solution:
[ NH4+ ] = 0.12 mol/L
[ OH- ] = 0.03 mol/L
To calculate the pH, we need to determine the concentration of H+ ions in the solution. Since NH4+ is a weak acid, it will undergo partial dissociation according to the following equation:
[tex]NH4+ + H2O ↔ NH3 + H3O+[/tex]
The equilibrium constant expression for this reaction is:
Ka = [ NH3 ][ H3O+ ] / [ NH4+ ]
Since NH4+ is the limiting reactant, we can assume that all of the NH4+ ions will react to form NH3 and H3O+ ions. Therefore, the concentration of NH3 and H3O+ ions will be equal to [ NH4+ ].
[ NH3 ] = [ NH4+ ] = 0.12 mol/L
Substituting the values into the equilibrium constant expression and solving for [ H3O+ ], we get:
[tex]Ka = 5.6 × 10^-10[/tex]
[tex][ H3O+ ] = sqrt( Ka × [ NH4+ ] ) = 1.34 × 10^-6 mol/L[/tex]
pH = -log [ H3O+ ] = -log ( 1.34 × 10^-6 ) = 5.87
Therefore, the pH of the solution is 5.87.
To know more about pH of the solution refer here
https://brainly.com/question/15163821#
#SPJ11
how many of the following molecules are nonpolar: cf4, sf4, xef4, pf5, if5? 4 3 2 0 1
Based on the analysis, the number of nonpolar molecules is 4 (CF4, XeF4, PF5, and IF5), while the number of polar molecules is 1 (SF4).
How many of the following molecules (CF4, SF4, XeF4, PF5, IF5) are nonpolar?To determine the polarity of molecules, we need to consider the molecular geometry and the presence of polar bonds. A molecule is nonpolar if the individual bond polarities cancel out each other due to symmetrical arrangement or if there are no polar bonds present.
Let's analyze each molecule:
CF4 (carbon tetrafluoride):
Carbon (C) is the central atom bonded to four fluorine (F) atoms.The C-F bonds are polar, with the fluorine atoms being more electronegative. However, the molecule has a tetrahedral geometry with symmetrical arrangement, resulting in the cancellation of bond polarities.Therefore, CF4 is a nonpolar molecule.SF4 (sulfur tetrafluoride):
Sulfur (S) is the central atom bonded to four fluorine (F) atoms.The S-F bonds are polar, with the fluorine atoms being more electronegative.The molecule has a trigonal bipyramidal geometry with an axial and equatorial arrangement.The axial and equatorial positions are not symmetrical, resulting in an overall molecular dipole moment.Therefore, SF4 is a polar molecule.XeF4 (xenon tetrafluoride):
Xenon (Xe) is the central atom bonded to four fluorine (F) atoms.The Xe-F bonds are polar, with the fluorine atoms being more electronegative.The molecule has a square planar geometry with symmetrical arrangement, resulting in the cancellation of bond polarities.Therefore, XeF4 is a nonpolar molecule.PF5 (phosphorus pentafluoride):
Phosphorus (P) is the central atom bonded to five fluorine (F) atoms.The P-F bonds are polar, with the fluorine atoms being more electronegative.The molecule has a trigonal bipyramidal geometry with an axial and equatorial arrangement.The axial and equatorial positions are not symmetrical, resulting in an overall molecular dipole moment.Therefore, PF5 is a polar molecule.IF5 (iodine pentafluoride):
Iodine (I) is the central atom bonded to five fluorine (F) atoms.The I-F bonds are polar, with the fluorine atoms being more electronegative.The molecule has a square pyramidal geometry with an axial and equatorial arrangement.The axial and equatorial positions are not symmetrical, resulting in an overall molecular dipole moment.Therefore, IF5 is a polar molecule.Learn more about nonpolar molecules
brainly.com/question/28300881
#SPJ11
cell cathode anode cell potential(V)
1&4 1 4 0.041
1&5 1 5 0.078
1&6 1 6 0.103
I. Cu in 1.0 M Cu(NO3)2
4. Cu in 0.1 M Cu(NO3)2
5. Cu in 0.01M Cu(NO3)2
6.Cu in 0.001 M Cu(NO3)2
=> Calculate the concetration cell
use the nernst equation and concentrations of Cu2+ to calculate the cell potentials for the cells that were constructed in the table using cell compartment 1 with each of cell compartments 4,5 and 6. in each case, compare the calculated cell potentials to the measured values. discuss any differences in sigh or magnitude.
The cell potential for the reaction is: 1&4 = 0.25 V 1&5 = 0.16 V.
To calculate the cell potential using the Nernst equation, we can use the following equation:
Ecell = E°cell - (RT/nF)ln(Q)
Where Ecell is the cell potential, E°cell is the standard cell potential, R is the gas constant (8.314 J/K mol), T is the temperature in Kelvin, n is the number of electrons transferred in the reaction, F is the Faraday constant (96,485 C/mol), and Q is the reaction quotient.
For the reactions given, we have:
1&4: Cu2+ (0.1 M) + 2e- → Cu (s)
1&5: Cu2+ (0.01 M) + 2e- → Cu (s)
1&6: Cu2+ (0.001 M) + 2e- → Cu (s)
The standard reduction potential for Cu2+/Cu is +0.34 V.
Using the Nernst equation, we can calculate the cell potential for each reaction as follows:
1&4: Ecell = 0.34 - (0.0257/2)ln(0.1) = 0.25 V
1&5: Ecell = 0.34 - (0.0257/2)ln(0.01) = 0.16 V
1&6: Ecell = 0.34 - (0.0257/2)ln(0.001) = 0.07 V
Comparing the calculated cell potentials to the measured values in the table, we can see that there are differences in both sign and magnitude.
For example, for the 1&4 cell, the measured potential is positive (+0.041 V), indicating that the reaction is spontaneous. However, the calculated potential is larger (+0.25 V), indicating that the reaction is even more spontaneous than predicted. This could be due to a number of factors, such as experimental error, deviation from ideal conditions, or incomplete understanding of the reaction mechanism.
Similarly, for the 1&5 and 1&6 cells, the calculated potentials are lower than the measured values, indicating that the reactions are less spontaneous than predicted. This could also be due to experimental error, or it could suggest that there are other factors influencing the reactions that are not accounted for in the Nernst equation.
To know more about cell potential follow the link:
https://brainly.com/question/10470515
#SPJ4
The nuclide 236 Np can decay by any of three different nuclear processes: a emission, B emission, or electron capture. Write a balanced nuclear equation for the decay of 236 Np by each process. Write a balanced nuclear equation for a emission of 236 Np. Express your answer as a nuclear equation. ΑΣΦ ? A chemical reaction does not occur for this question. Submit Request Answer Part B Write a balanced nuclear equation for B emission of 236 Np. Express your answer as a nuclear equation. ΑΣΦ ? A chemical reaction does not occur for this question. Submit Request Answer Part C Write a balanced nuclear equation for electron capture of 236 NP.
A.)236 Np -> 236 U + α particle (alpha decay) B.)236 Np -> 236 Pu + β particle (beta decay) C.)236 Np + e- -> 236 Pa (electron capture)
Part A: The balanced nuclear equation for the decay of 236 Np by alpha emission is:
236 Np → 232 Th + 4 He
Part B: The balanced nuclear equation for the decay of 236 Np by beta emission is:
236 Np → 236 Pu + e- + νe
Part C: The balanced nuclear equation for the decay of 236 Np by electron capture is:
236 Np + e- → 236 Pa + νe
In electron capture, an electron is captured by the nucleus, and a neutron is converted into a proton. This results in the decrease of the atomic number by one and no change in the mass number. In beta decay, a neutron is converted into a proton and an electron is emitted.
The emitted electron is a beta particle, and it is accompanied by an antineutrino. This results in the increase of the atomic number by one and no change in the mass number.
In alpha decay, an alpha particle is emitted, which is a helium nucleus consisting of two protons and two neutrons. This results in the decrease of the atomic number by two and the mass number by four.
For more question on alpha decay visit:
https://brainly.com/question/17145324
#SPJ11
what is the charge of the complex formed by a nickel(0) metal atom coordinated to four carbon monoxide molecules?
The charge of the complex formed by a nickel(0) metal atom coordinated to four carbon monoxide molecules is 0.
A nickel(0) metal atom has an oxidation state of 0. Carbon monoxide is a neutral ligand, meaning it does not have a charge and thus, contribute no charge to the complex. When the nickel(0) metal atom coordinates with four carbon monoxide molecules, the charges do not change. Therefore, the overall charge of the complex is determined solely by the charge of the metal centre, which in this case is zero.
Learn more about carbon monoxide : https://brainly.com/question/21499818
#SPJ11
The reaction of an aldehyde or a ketone with phmgbr followed by acidic workup is an example of a/an:________
The reaction of an aldehyde or a ketone with phmgbr (phenylmagnesium
bromide) followed by acidic workup is an example of a nucleophilic
addition reaction.
Phenylmagnesium bromide is a nucleophile that can add to the carbonyl
group of the aldehyde or ketone, forming a new carbon-carbon bond.
This reaction is also known as the Grignard reaction, named after the
French chemist Victor Grignard who discovered this type of reaction.
After the addition of the nucleophile, the acidic workup (usually with
hydrochloric acid or sulfuric acid) is used to protonate the intermediate
and convert it into the final product, which is an alcohol.
Overall, this reaction is a useful synthetic tool for the preparation of
alcohols from carbonyl compounds.
To know more about Grignard reaction refer here
https://brainly.com/question/31845460#
#SPJ11
Write equations to show how these substances ionize or dissociate in water.
a.) NH4Cl
b.) Cu(NO3)2
c.) HgCl2
a) NH₄Cl → NH₄⁺ + Cl⁻
b) Cu(NO₃)₂ → Cu²⁺ + 2NO₃⁻
c) HgCl₂ → Hg²⁺ + 2Cl⁻
When a substance dissolves in water, it may dissociate or ionize, forming charged particles or ions. In the case of NH₄Cl, the molecule dissociates into ammonium ions (NH₄⁺) and chloride ions (Cl⁻) due to the attraction of the polar water molecules to the ions.
Similarly, Cu(NO₃)₂ dissociates into copper ions (Cu²⁺) and nitrate ions (NO₃⁻), while HgCl₂ dissociates into mercury ions (Hg²⁺) and chloride ions (Cl⁻). The resulting ions are hydrated by surrounding water molecules, which help stabilize them in solution.
The process of dissociation or ionization is important in understanding the properties of solutions and can be used to predict how substances will behave in water or other solvents.
To know more about ionization refer here:
https://brainly.com/question/28385102#
#SPJ11
if the reaction produces 0.143 mol co2, what mass of co2 is collected?
If the reaction produces 0.143 mol CO2, the mass of CO2 collected is approximately 6.29 g.
To calculate the mass of [tex]CO_2[/tex] collected when the reaction produces 0.143 mol [tex]CO_2[/tex], you can follow these steps:
1. Determine the molar mass of [tex]CO_2[/tex]: The molar mass of [tex]CO_2[/tex] is the sum of the molar masses of one carbon atom and two oxygen atoms. Carbon has a molar mass of 12.01 g/mol, and oxygen has a molar mass of 16.00 g/mol. So, the molar mass of [tex]CO_2[/tex] is 12.01 g/mol + (2 × 16.00 g/mol) = 44.01 g/mol.
2. Multiply the moles of [tex]CO_2[/tex] by its molar mass: To find the mass of [tex]CO_2[/tex] collected, multiply the number of moles (0.143 mol) by the molar mass of [tex]CO_2[/tex] (44.01 g/mol):
Mass of [tex]CO_2[/tex] = (0.143 mol) × (44.01 g/mol) = 6.29343 g
Therefore, when the reaction produces 0.143 mol [tex]CO_2[/tex], the mass of [tex]CO_2[/tex] collected is approximately 6.29 g.
To know more about Reaction refer here:
https://brainly.com/question/26283409
#SPJ11
are the massive reef limestones of section 3 the same age as the massive reef limestones of section 7, and why?
The age of the reef limestones in different locations can be determined using radiometric dating techniques, such as uranium-lead dating or carbon dating.
If the ages of the reef limestones in section 3 and section 7 are found to be similar, then it is likely that they are of the same age. However, there could be local variations in the age of the reef limestones due to differences in geological history or environmental factors.
Radiometric dating is a method used to determine the age of rocks or fossils by measuring the decay of radioactive isotopes within them. The rate of decay is constant, allowing scientists to calculate the age of the sample by measuring the ratio of isotopes present.
Therefore, a detailed geological analysis of the two sections would be needed to determine the age relationship between the massive reef limestones of section 3 and section 7.
To learn more about radiometric dating refer here:
https://brainly.com/question/14799339#
#SPJ11
10. 34 The activation energy for the decomposition of benzene diazonium chloride is 99. 1 kJ mol−1. At what temperature will the rate be 10 per cent greater than its rate at 25°C?
The temperature at which the rate will be 10% greater than its rate at 25°C is approximately 116.7°C.
The Arrhenius equation describes the relationship between the rate constant (k) of a reaction, the activation energy (Ea), and the temperature (T):
k = A * exp(-Ea / (R * T))
To find the temperature at which the rate is 10% greater than its rate at 25°C, we can set up the following equation:
k(T) = 1.1 * k(25°C)
where k(T) is the rate constant at temperature T.
Plugging in the values into the Arrhenius equation:
A * exp(-Ea / (R * T)) = 1.1 * A * exp(-Ea / (R * 298 K))
Simplifying the equation:
exp(-Ea / (R * T)) = 1.1 * exp(-Ea / (R * 298 K))
Taking the natural logarithm of both sides:
-Ea / (R * T) = ln(1.1) - Ea / (R * 298 K)
Simplifying further:
1 / (R * T) = (1 / (R * 298 K)) * (ln(1.1) - Ea / (R * 298 K))
Solving for T:
T = 1 / ((ln(1.1) - Ea / (R * 298 K)) * R)
Substituting the values of Ea = 99.1 kJ mol^(-1) and R = 8.314 J mol^(-1) K^(-1), we can calculate the temperature T, which is approximately 116.7°C.
To learn more about activation energy, here
https://brainly.com/question/28384644
#SPJ4
37. select all substances that would make a basic solution when dissolving in water. cu(no3)2 kbro naoh nano3 nh4br a) naoh b) cu(no3)2 and nh4br c) kbro d) naoh and kbro e) nh4br, naoh, and nano3
To determine which substances would make a basic solution when dissolving in water, we need to look at their pH levels. A pH level between 7-14 is considered basic, while a pH level between 0-7 is acidic.
Out of the given substances, only NaOH (sodium hydroxide) has a pH level greater than 7. When NaOH dissolves in water, it dissociates into Na+ and OH- ions, which makes the solution basic. Therefore, option a) NaOH is the correct answer.
Cu(NO3)2 (copper nitrate) and NH4Br (ammonium bromide) are both salts and do not have a significant impact on the pH level of water. KBrO (potassium bromate) and NaNO3 (sodium nitrate) are neutral substances and do not affect the pH level. NH4Br is slightly acidic, so it would actually make a solution more acidic when dissolving in water.
In summary, only NaOH would make a basic solution when dissolving in water.
To know more about acidic click this link-
brainly.com/question/29796621
#SPJ11
in which step of the four-stroke engine cycle does the car release CO2, H20, and CO?
A. air and fuel intake
B. compression and ignition
C. combustion and expansion
D. exhaust
correct answer is D. on apex
Answer:
d is the answer
Explanation:
well you did put the answer but not XPLANATION so why not:
the four-stroke engine cycle does the car release any of :
CO2 & H2O
So d is correct
D being the answer
The following reaction is first order in N2O5: N2O5(g)→NO3(g)+NO2(g) The rate constant for the reaction at a certain temperature is 0.053/s.
Calculate the rate of the reaction when [N2O5]= 5.4×10−2 M .
What would the rate of the reaction be at the same concentration as in part a if the reaction were second order? (Assume the same numerical value for the rate constant with the appropriate units.)
Zero order?
If the reaction were second order, the rate would be 0.053/s x [N₂O₅]², and if the reaction were zero order, the rate would be 0.053/s.
To calculate the rate of the reaction if it were second order, we need to use the second-order rate equation:
rate = k[N₂O₅]².
Plugging in the given rate constant (0.053/s) and concentration of N₂O₅, we get: rate = 0.053/s x [N₂O₅]².
To calculate the rate of the reaction if it were zero order, we need to use the zero-order rate equation:
rate = k[N2O5]⁰ = k.
Plugging in the given rate constant (0.053/s), we get: rate = 0.053/s.
Learn more about chemical reaction at https://brainly.com/question/14753818
#SPJ11
Hey guys need some help. The humerus is the bone in your upper arm. How is it classified?
Human Skeleton Anatomy Posterior view. 3D
A. short bone
B. flat bone
C. irregular bone
D. long bone
Calculate the emf of the following concentration cell:
Mg(s)l Mg2+(0.19M) ll Mg2+(0.50M) l Mg(s)
In the given cell, the EMF of the concentration is approximately 0.0294 volts.
To calculate the EMF of the given concentration cell, you can use the Nernst equation: E_cell = E° - (RT/nF) * ln(Q). In this cell, Mg2+ ions are in equilibrium with solid Mg at both electrodes, so E° = 0.
Temperature (T) is assumed to be 298K, R = 8.314 J/(mol*K), n = 2 (for Mg2+), and F = 96485 C/mol.
The reaction quotient (Q) is [Mg2+]_cathode / [Mg2+]_anode = 0.50M / 0.19M.
Plugging in the values, we get E_cell = 0 - (8.314 * 298 / (2 * 96485)) * ln(0.50 / 0.19). Solving this, E_cell ≈ 0.0294 V. So, the EMF of the concentration cell is approximately 0.0294 volts.
More on EMF: https://brainly.com/question/31799636
#SPJ11
The emf (or cell potential) of the concentration cell is -2.383 V.
How to find the electromotive force?The emf (electromotive force) of a concentration cell can be calculated using the Nernst equation:
Ecell = E°cell - (RT/nF) x ln(Q)
where:
Ecell is the cell potential (emf)E°cell is the standard cell potential, which can be looked up in a table of standard reduction potentialsR is the gas constant (8.314 J/K/mol)T is the temperature in kelvinn is the number of electrons transferred in the balanced redox reactionF is Faraday's constant (96,485 C/mol)Q is the reaction quotient, which is the ratio of the concentrations of products to reactants, each raised to their stoichiometric coefficients.In this case, the cell consists of two half-cells, with one containing a magnesium electrode in contact with a 0.50 M solution of Mg₂+ ions, and the other containing a magnesium electrode in contact with a 0.19 M solution of Mg₂+ ions.
The balanced redox reaction for the cell is:
Mg(s) + Mg₂+(0.19 M) → Mg₂+(0.50 M) + Mg(s)
which involves the transfer of two electrons. The standard reduction potential for this half-reaction is -2.37 V.
Using the Nernst equation and plugging in the given values, we get:
Ecell = E°cell - (RT/nF) x ln(Q)Ecell = -2.37 V - (8.314 J/K/mol x 298 K / (2 x 96,485 C/mol)) x ln(0.50/0.19)Ecell = -2.37 V - (0.0134 V) x ln(2.63)Ecell = -2.37 V - (0.0134 V) x 0.962Ecell = -2.37 V - 0.013 VEcell = -2.383 VTherefore, the emf (or cell potential) of the concentration cell is -2.383 V.
Learn more about emf
brainly.com/question/15121836
#SPJ11
(i). Balance the following chemical equation. (2 points) HCl+CaCO3 → CaCl2+H2O+CO2. (ii). Calculate the theoretical yield of CO2 if 4.5g of HCl is reacted with 12g of CaCO; based on your balanced equation. (2 points (iii). A student carried out the reaction and isolated 2.5g of CO2. Calculate the percent yield of CO2. (2 points).
(i) The balanced chemical equation for the reaction is:
[tex]2HCl + CaCO_3 = CaCl_2 + H_2O + CO_2[/tex]
(ii) The molar mass of [tex]CO_2[/tex] is 44.01 g/mol, so the theoretical yield of [tex]CO_2[/tex] in grams is 5.28 g [tex]CO_2[/tex]
(iii) The percent yield of [tex]CO_2[/tex] is 47.3%.
(i) The balanced chemical equation for the reaction is:
[tex]2HCl + CaCO_3 = CaCl_2 + H_2O + CO_2[/tex]
(ii) To calculate the theoretical yield of [tex]CO_2[/tex], we first need to determine the limiting reagent.
The molar mass of HCl is 36.5 g/mol, so 4.5 g of HCl corresponds to 0.123 mol:
4.5 g HCl x (1 mol HCl/36.5 g HCl) = 0.123 mol HCl
The molar mass of [tex]CaCO_3[/tex] is 100.1 g/mol, so 12 g of [tex]CaCO_3[/tex] corresponds to 0.12 mol:
12 g [tex]CaCO_3[/tex] x (1 mol [tex]CaCO_3[/tex]/100.1 g [tex]CaCO_3[/tex] ) = 0.12 mol [tex]CaCO_3[/tex]
The balanced equation shows that 1 mol of [tex]CaCO_3[/tex] produces 1 mol of [tex]CO_2[/tex] . Therefore, since [tex]CaCO_3[/tex] is limiting, the theoretical yield of [tex]CO_2[/tex] is 0.12 mol.
The molar mass of [tex]CO_2[/tex] is 44.01 g/mol, so the theoretical yield of [tex]CO_2[/tex] in grams is:
0.12 mol [tex]CO_2[/tex] x (44.01 g [tex]CO_2[/tex] /mol) = 5.28 g [tex]CO_2[/tex]
(iii) The percent yield of [tex]CO_2[/tex] is calculated using the actual yield (2.5 g) and the theoretical yield (5.28 g) as follows:
Percent yield = (actual yield / theoretical yield) x 100%
Percent yield = (2.5 g / 5.28 g) x 100%
Percent yield = 47.3%
For more question on balanced chemical equation click on
https://brainly.com/question/11904811
#SPJ11