calculate the magnitude of the gravitational field of the sun at the location of earth, in meters per square second.

The network administrator might issue the "show cdp neighbors" command after a ping fails between two directly connected routers (in this case, from R1 to R2) to obtain more information about the neighbors of each router.

The Cisco Discovery Protocol (CDP) is a proprietary protocol used by Cisco devices to share information about neighboring devices on the network. By issuing the "show cdp neighbors" command on Router R1, the network administrator can view information about the directly connected devices, including Router R2. The command will display information such as the device ID, local interface, and the platform of the neighboring device. This information can help the network administrator to determine if the neighboring device is correctly identified and if there are any connectivity issues with the neighboring device. If the "show cdp neighbors" command shows that Router R2 is not identified as a neighbor of Router R1, the network administrator may need to check the physical connectivity between the two devices or check if there is an issue with the configuration of either router. On the other hand, if Router R2 is identified as a neighbor, the network administrator may need to investigate further to determine the root cause of the ping failure.

Learn more about ping fails  here:

https://brainly.com/question/30053643

#SPJ4

Answer:

in image

Explanation:

I don't think so it helped but through this you can do the question exactly like this ( in this way) ...

Answer:

Explanation:

Assuming you want to find the resultant vector of the two given vectors:

We can use the graphical method or the component method to find the resultant vector. Here, I will demonstrate the component method:

Step 1: Convert the given vectors into their component form (i.e., horizontal and vertical components).

Vector 1: 120 N bearing 70°

Horizontal component = 120 cos(70°) ≈ 38.23 N

Vertical component = 120 sin(70°) ≈ 113.41 N

Vector 2: 160 N bearing 40°

Horizontal component = 160 cos(40°) ≈ 122.15 N

Vertical component = 160 sin(40°) ≈ 103.08 N

Step 2: Add the horizontal components and vertical components separately to get the components of the resultant vector.

Horizontal component of resultant vector = 38.23 N + 122.15 N ≈ 160.38 N

Vertical component of resultant vector = 113.41 N + 103.08 N ≈ 216.49 N

Step 3: Use the Pythagorean theorem to find the magnitude of the resultant vector.

Magnitude of resultant vector = √(160.38 N)^2 + (216.49 N)^2 ≈ 268.15 N

Step 4: Find the direction of the resultant vector.

Direction of resultant vector = tan^-1(216.49 N / 160.38 N) ≈ 53.12°

Therefore, the resultant vector of the two given vectors is approximately 268.15 N at a bearing of 53.12°.

The relative humidity of an air parcel will increase if any of the following actions are taken:

To understand this further, we can look at the formula for relative humidity, which is the amount of water vapor in the air divided by the amount of water vapor that can exist at a particular temperature. When the temperature is kept constant and the dew point increases, the amount of water vapor in the air increases, resulting in an increase in relative humidity.

The followings are the given options and the actions they will take that will cause the relative humidity of an air parcel to increase:

Option A: Keep the parcel's temperature constant and increase the parcel's dew point. This action would increase the RH of the air parcel because it will increase the quantity of water vapor in the air parcel. As the parcel's temperature is constant, the ability of the air to hold water vapor also remains constant.

Option B: Decrease the parcel's temperature and increase the parcel's dew point. This action would also increase the RH of the air parcel. As the temperature of the parcel decreases, the amount of moisture that the air can contain also decreases. When the dew point is raised, the quantity of water vapor in the air parcel rises relative to the amount it can carry.

Option C: Keep the parcel's temperature constant and keep the parcel's dew point constant. In this case, there will be no increase in RH because the quantity of water vapor in the air parcel will remain the same as the ability of the air to hold water vapor remains constant.

Option D: Increase the parcel's temperature and increase the parcel's dew point. Increasing the parcel's temperature will raise the ability of the air to hold water vapor, but it will not increase the amount of water vapor in the air parcel. As a result, the RH of the air parcel will decrease.

Option E: Keep the parcel's dew point constant and increase the parcel's temperature. This action will also decrease the RH of the air parcel as it will increase the amount of moisture that the air can hold. Thus, the relative humidity will decrease.

To know more about relative humidity follow

https://brainly.com/question/13275394

#SPJ11

Hot Jupiters came as a surprise to scientists because these planets are so close to their stars. Hot Jupiters orbit much closer to their stars than the terrestrial and jovian planets in our solar system. Despite their close proximity to their stars, these planets are still relatively large compared to the other planets in their systems.

Based on what we know about our own solar system, the discovery of hot Jupiter came as a surprise to scientists because these planets are so close to their stars.

Hot Jupiters, also known as roaster planets or bloated gas giants, are gas giant planets with a mass similar to Jupiter, but they orbit much closer to their parent stars. They have orbital periods of fewer than ten days and an average distance of fewer than 0.1 astronomical units (AU).

Hot Jupiters are a strange type of planet because, according to the latest models of solar system development, planets with such high masses could not have developed so close to their host star. As a result, Hot Jupiters were an unexpected discovery. They are so close to their parent star that their atmospheric temperature is around 1,500 degrees Celsius. Hot Jupiters are also known for their extreme temperature fluctuations since one side is always facing its host star while the other is in perpetual darkness.

Hot Jupiters are only one of the many types of exoplanets discovered in recent years that differ significantly from the ones in our solar system. The existence of such planets has expanded our knowledge of the universe and of the various solar systems present in the universe.

To learn more about hot Jupiters follow

https://brainly.com/question/29988610

#SPJ11

A subtype discriminator is the attribute in the supertype entity that determines to which entity subtype each supertype occurrence is related. Option (a) is correct.

The entity supertype is a concept in a database schema that represents a group of entities that share the same attributes or characteristics. A subtype is a subset of entities that possess specific distinguishing characteristics or attributes that are not present in the supertype. A subtype will have at least one different attribute or relationship, apart from all of the characteristics that the supertype contains.

A subtype is a refinement of a supertype entity. An entity type, known as the supertype, has multiple subtypes that can be derived from it. Subtypes may be exclusive (disjoint) or nonexclusive (overlapping). Exclusive subtypes contain nonoverlapping entities, whereas nonexclusive subtypes have overlapping entities.

Supertype and subtype entities can be used in conjunction with the entity-relationship model. A subtype is a distinct entity that has one or more attributes that are specific to it but not present in its supertype. The subtype of an entity is said to be derived from its supertype by extension or specialization.

Therefore, option (a) is correct.

Learn more about supertype: https://brainly.com/question/31140073

#SPJ11

True. Earthquakes should have only one magnitude, but in practice, different measurement methods and aftershocks can result in some level of uncertainty and multiple values.

The magnitude of an earthquake is a measure of the amount of energy released during a seismic event. Theoretically, a single earthquake should only have one magnitude, which is determined by analyzing the amplitude of the seismic waves recorded on seismographs. However, in practice, different methods of measurement or different seismic stations can yield slightly different magnitude values, resulting in some level of uncertainty in the reported magnitude. Furthermore, earthquakes can cause aftershocks, which are smaller seismic events that occur after the main earthquake. These aftershocks can have their own magnitudes, which are typically smaller than the main earthquake but can still cause damage and contribute to the overall seismic activity in the region.

learn more about aftershocks here:

https://brainly.com/question/6843834

#SPJ4

You may access instructional websites using a web browser like G##gle Chrome, M*Zilla Firefox, Saf#ri, or Micr#soft Edge_.

Users can only access and engage with websites on the internet via a web browser, which is a necessary programme. It is a piece of software that downloads web pages and shows them on the computer or device of the user. Several features, such bookmarks, tabbed browsing, and private browsing, are included in web browsers to make browsing simpler. Users may quickly visit educational websites to study, research, or locate materials on a certain topic by using a web browser like G**gle Chr*me, M*zilla F#refox, S*fari, or Micr#soft Edge_. Moreover, web browsers let users personalise their surfing by enabling extensions or plugins that improve functionality or restrict objectionable information.

learn more about web browser here:

https://brainly.com/question/9776568

#SPJ4

The energy of the incident electron is 26.3 keV. The energy is calculated from the conservation of energy which states that the initial energy is equal to the final energy of the electrons. Total energy is sum of kinetic energy and potential energy of the electrons.

The initial energy of the incident electron can be determined using the following equation:

[tex]E_{initial}= \Delta K + E_{final} + U[/tex]

where ΔK is the change in kinetic energy, [tex]E_{final}[/tex] is the final energy, and U is the potential energy.

Here, the second electron is initially at rest, and after the collision, the trajectories of the two electrons are at 90° to a uniform magnetic field. The magnetic force is perpendicular to the direction of motion, and hence, there is no work done. The potential energy U is, therefore, zero.

Initially, only the incident electron has energy, and hence, its initial energy is equal to its kinetic energy.

[tex]E_{initial} = \Delta K + E_{final}[/tex]

But, [tex]E_{final} = \frac{1}{2}mv_f^2[/tex]

Therefore,

[tex]E_{initial} = \Delta K + \frac{1}{2}mv_f^2[/tex]

The change in kinetic energy ΔK can be calculated using the following equation:

[tex]\Delta K = K_f - K_i[/tex]

But, [tex]K_i = \frac{1}{2}mv_i^2[/tex] where, [tex]v_i[/tex] is the initial velocity of the incident electron.

Therefore,

[tex]\Delta K = K_f - K_i= \frac{1}{2}mv_f^2 - \frac{1}{2}mv_i^2[/tex]

Substituting the given values,

[tex]\Delta K = \frac{1}{2}(9.11 \times 10^{-31} kg)(4.24\times 10^5 m/s)^2 - \frac{1}{2}(9.11\times10^{-31} kg)(3\times10^8 m/s)^2\\= -4.22\times10^{-15} Joules[/tex]

The energy of the incident electron can be converted to keV by dividing it by the charge of an electron and then multiplying by 1000.eV .

Therefore,

[tex]E_{initial} = 4.22 \times 10^{-15} J / (1.602 \times 10^{-19} C/eV)\\ = 26.3 keV[/tex]

Thus, the energy of the incident electron is 26.3 keV.

For further detail on the kinetic energy, click on the following link:

https://brainly.com/question/18461965

#SPJ11

To travel 56 million km distance between Earth and Mars at the time of closest approach,Assuming a constant speed of 58,000 km/h, it would take approximately 97 hours, or 4.04 days.

We can use the formula:

time = distance / speed

where distance is the distance between Earth and Mars during closest approach, and speed is the speed of the spaceship.

substituting in the given values, we get:

time = 56,000,000 km / 58,000 km/h

time = 965.5 hours

So it would take approximately 965.5 hours to travel from Earth to Mars at the time of closest approach. This is equivalent to about 40 days. However, this estimate is only for the ideal scenario in which Mars does not move relative to Earth during the entire trip.

To learn more about distance:

https://brainly.com/question/4931057

#SPJ11

If you stand next to a wall on a frictionless skateboard and push the wall with a force of 30 N, the wall will push you with a force of 30 N. Here's how you can show that your acceleration is 0.5 m/s² if your mass is 60 kg:Solution:The formula for force is:

F = ma

Where:

F is the force,

m is the mass,

a is the acceleration

Rearrange the equation for acceleration:

a = F/m

Substitute the given values:

F = 30 Nm = 60 kg

Then, solve for acceleration:

a = 30 N/60 kga = 0.5 m/s²

Therefore, your acceleration is 0.5 m/s² if your mass is 60 kg.

Learn more about acceleration: https://brainly.com/question/460763

#SPJ11

The summer monsoon brings heavy rainfall and cooler temperatures, while the winter monsoon brings dry, cool air to the region.

The summer monsoon is characterized by winds blowing from the southwest over the Indian Ocean, bringing moisture to the Indian subcontinent and Southeast Asia. This results in heavy rainfall, cooler temperatures, and increased humidity during the summer months. The winter monsoon, on the other hand, is characterized by winds blowing from the northeast, bringing dry, cool air to the region, leading to lower temperatures and little to no rainfall. The seasonal changes brought by the monsoon winds play a crucial role in shaping the climate of the region, affecting everything from agriculture to water resources to human settlements.

To know more about monsoons, here

brainly.com/question/22831604

#SPJ4

Answer to following (a) , (b) and (c) question are: 63.00 J, 40.0 J, 63.00 J

(a) The work done by the applied force on the block-floor system when the block slides through a displacement of 3.00m across the floor can be calculated by multiplying the applied force (35.0 N) and the displacement (3.00 m), with a coefficient of kinetic friction (0.600) for the system. Thus, the work done is 35.0N * 3.00m * 0.600 = 63.00 J.

(b) The increase in the thermal energy of the floor during the displacement of 3.00m is equal to the thermal energy of the block (40.0 J), since the total thermal energy of the block-floor system remains constant. Therefore, the increase in thermal energy of the floor is 40.0 J.

(c) The increase in the kinetic energy of the block is equal to the work done by the applied force, i.e., 63.00 J.

To know more about "coefficient of kinetic friction" refer here:

https://brainly.com/question/13754413#

#SPJ11

The power dissipation in the ion channel is 4.9 mW given that the potential difference across the ion channel is 70 mv

The power dissipated by a resistor is given by the formula:P = V² / RwhereP = PowerV = VoltageR = Resistance

The power dissipated in the ion channel is unknown. However, we can consider the ion channel to have a resistance of 1 Ω. This is because the resistance of an ion channel is very small and close to zero. So, we can assume the resistance of the ion channel as 1 Ω.As we know the potential difference across the ion channel, we can use the above formula to find the power dissipated in the ion channel.P = (70 mV)² / 1 ΩP = 0.0049 W = 4.9 mW

Therefore, the power dissipation in the ion channel is 4.9 mW.

More on power: https://brainly.com/question/29347465

#SPJ11

The direction of the electric fields for all the points can be described with one simple statement that states "Electric fields flow from the point of the positive charge to the point of the negative charge".

Positive charges generate electric fields that travel outward from their positions. Negative charges generate electric fields that travel inwards toward their positions. Electric fields are invisible and have no mass or charge.

The direction of the electric field is always perpendicular to the equipotential lines, indicating the direction of the force acting on the charge. When two charges are placed near each other, they will create electric fields. The electric fields will interact with each other, and the resulting force is a product of the interaction of the electric fields.

The electric field generated by the negative charge flows towards the positive charge. The electric field generated by the positive charge flows away from the positive charge.

To know more about electric fields refer here:

https://brainly.com/question/8971780#

#SPJ11

The probability that exactly 5 customers will buy the oversize racquet is 0.041, 0.185, 0.360, 0.304 and 0.171.

In this case, we have two possible outcomes (midsize and oversize versions) with a probability of 77% for the oversize version. The probability mass function (pmf) of a binomial distribution is:

[tex]P(x) = _nC^x (p)^x (1-p)^n^-^x[/tex],

where,

n is the number of trials (5 customers) and

p is the probability of the event occurring (77% for the oversize version).

Therefore, the probability that the next 5 customers buy the oversize version is:

[tex]P(x) = _5C^x (0.77)^x (0.23)^5^-^x[/tex]

where x is the number of customers who purchase the oversize racquet.

Using this formula, we can calculate the probabilities of different scenarios:

[tex]P(X = 0) = _5C^0 (0.77)^0 (0.23)^5 = 0.002 \\P(X = 1) = _5C^1 (0.77)^1 (0.23)^4 = 0.041 \\P(X = 2) = _5C^2 (0.77)^2 (0.23)^3 = 0.185 \\P(X = 3) = _5C^3 (0.77)^3 (0.23)^2 = 0.360 \\P(X = 4) = _5C^4 (0.77)^4 (0.23)^1 = 0.304 \\P(X = 5) = _5C^5 (0.77)^5 (0.23)^0 = 0.171[/tex]

So, for example, the probability that exactly 3 customers will buy the oversize racquet is 0.360.

Learn more about probability: https://brainly.com/question/24756209

#SPJ11

The given statement is true. Because since the net electric field at point P is twice the electric field due to charge Q₂, this means that the electric field due to charge Q₁ must be three times greater than the field by charge Q₂. Therefore, R₁ = R₂.

The electric field, E is a vector quantity that exists in the vicinity of electric charges. The electric field, E exists in the region of space where an electric charge or a collection of charges is present. Electric charges have an effect on each other, which is accomplished via the electric field.

The electric field is a force field that surrounds the electric charges. If there are two charges Q₁ and Q₂ placed at a distance R from a point P, the electric field at P due to each charge is given by,

E₁ = (1/4πε₀) × (Q1/R²) and E2 = (1/4πε₀) × (Q2/R²)

The electric field, E, at point P due to both charges is given by,

E = E₁ + E₂

If the magnitude of the net electric field at P is twice the electric field due to charge Q₂, this means that the electric field due to charge Q₁ is three times greater than the field due to charge Q₂ and that charges Q₁ and Q₂ are of the same sign.

Therefore, R₁ = R₂ is true.

Leran more about  electric field at https://brainly.com/question/14372859

#SPJ11

Answer:

The weight of the 225-kg space probe on the moon is 364.5 N (newtons).

Explanation:

To calculate the weight of the space probe on the moon, we can use the formula:

weight = mass x acceleration due to gravity

where mass is given as 225 kg and acceleration due to gravity on the moon is 1.62 m/s^2.

weight = 225 kg x 1.62 m/s^2

weight = 364.5 N

Therefore, the weight of the 225-kg space probe on the moon is 364.5 N (newtons).

(a) The coefficient of performance of the refrigerator is 0.625, indicating that 5.0 kJ of heat absorbed by the refrigerator produces 8.0 kJ of heat released to the hot reservoir. (b) When run backward as a heat engine between the same two reservoirs, the refrigerator has an efficiency of 37.5%.

(a) The coefficient of performance of a refrigerator is given by the ratio of the heat absorbed from the cold reservoir to the work input. Here, the heat absorbed is 5.0 kJ and the heat rejected to the hot reservoir is 8.0 kJ. Therefore, the work input is:

Work input = Heat rejected - Heat absorbed

= 8.0 kJ - 5.0 kJ

= 3.0 kJ

So, the coefficient of performance is:

Coefficient of performance = Heat absorbed / Work input

= 5.0 kJ / 3.0 kJ

= 1.67

Therefore, the coefficient of performance of the refrigerator is 1.67.

(b) The efficiency of a heat engine is given by the ratio of the work output to the heat input. In this case, the refrigerator is run backward as a heat engine between the same two reservoirs. So, the heat input to the engine is 8.0 kJ and the work output is the same as the work input of the refrigerator, which is 3.0 kJ. Therefore, the efficiency of the heat engine is:

Efficiency = Work output / Heat input

= 3.0 kJ / 8.0 kJ

= 0.375

So, the efficiency of the heat engine is 37.5%.

To know more about coefficient of performance, refer here:

https://brainly.com/question/28175149#

#SPJ11

The distance did the arrow travel over if it were in the air for 2.4 seconds is  100.8 meters.

An arrow leaves a bow with a speed of 42 m/s. Its velocity is reduced to 34 m/s by the time it hits its target. And the arrow traveled in the air for 2.4 seconds.

To find the distance traveled by the arrow, we can use the following formula:

S = v₀t + 1/2at²

where, S = distance traveled v₀ = initial velocity = 42 m/s, t = time taken = 2.4 s, a = acceleration = ? u = final velocity = 34 m/s.

As per the question, the arrow is traveling through the air, so the acceleration is due to gravity, which is equal to 9.8 m/s².So, a = 9.8 m/s². Now, we can substitute the given values in the above formula:

S = 42 m/s × 2.4 s + 1/2 × 9.8 m/s² × (2.4 s)²

S = 100.8 m.

The arrow traveled approximately 100.8 meters in the air.

Read more about the distance :

https://brainly.com/question/28551043

#SPJ11

The rock will be 12 meters from the ground level after it has been thrown upward with a velocity of 12 meters per second from the top of the 42 meter high cliff for a total of 3.5 seconds.

The cliff is the height that generally has the highest height and it can be mountains, stones, buildings.

This is because the total time taken for the rock to fall back down will be the same as the total time taken for the rock to reach the top of the cliff. The equation used to calculate this is: time = distance / velocity. Therefore:

Time = 42 meters (cliff height) / 12 meters per second (velocity) = 3.5 seconds.

So, the rock will be 12 meters from the ground level after 3.5 seconds.

Read more about cliff here:

https://brainly.com/question/22789028

#SPJ11

The concentration of water vapor varies the most in the atmosphere.

The atmosphere is a thin layer of gas that surrounds the Earth. The atmosphere is composed of roughly 78% nitrogen and 21% oxygen, with trace amounts of other gases like argon and carbon dioxide. In addition, water vapor and aerosols are also present in the atmosphere.

Water vapor is the atmospheric component that fluctuates the most in concentration. It has a critical role in the planet's climate and is present in varying amounts in all parts of the atmosphere. Water vapor concentration is essential in the Earth's energy balance since it is a greenhouse gas that captures radiation from the sun and heats the planet's surface.

The amount of water vapor in the atmosphere can vary greatly depending on the temperature, location, and other environmental factors. Warm air can hold more water vapor than cold air, and areas with higher humidity can have more water vapor than arid regions. Overall, the concentration of water vapor in the atmosphere is constantly changing and fluctuating.

To learn more about water vapor, visit: https://brainly.com/question/1361830

#SPJ11

As a question-answering bot, I cannot provide the links to open the resources as they have not been mentioned in the question. However, I can provide an explanation for the concept of electromagnetic induction.

Electromagnetic induction is the method of producing an electromotive force (EMF) in an electrical conductor by modifying the magnetic flux surrounding the conductor. This happens when there is relative movement between the conductor and the magnetic field.

When a magnetic field fluctuates, an electric current is generated in a circuit. The magnetic field produced by the current generates a magnetic field that interacts with the magnetic field that produces it, causing an increase in the magnetic flux in the conductor, according to Lenz's law.

The magnitude of the induced EMF is proportional to the rate at which the magnetic field changes. This is the fundamental concept behind the design of transformers, generators, and other electromagnetic devices. Faraday's Law of Electromagnetic Induction and Lenz's Law are the two essential laws of electromagnetic induction.

Leran more about electromagnetic induction at https://brainly.com/question/22385657

#SPJ11

The energy of the photon emitted when an electron in a mercury atom drops from energy level f to energy level b is calculated to be 3.06 eV. Correct option is C.

Photons emit energy when they transition from one energy state to another.

The energy corresponding to an orbital is calculated as,

E = -E₀/n²

The electrons' altered energy level is computed as,

ΔE = Eb - Ef

ΔE = -2.68 eV - (-5.74 eV)

ΔE = 3.06 eV

As a result, a mercury atom's electron emits a particle with a 3.06 eV energy when it transitions from energy level f to energy level b. The best choice is C.

To know more about energy level:

https://brainly.com/question/14287666

#SPJ4

The ranking of the ropes on the basis of the force each exerts on the crate immediately to its left, from largest to smallest, is as follows:

F > A > D > B > E > H > G > C

Rope F exerts the largest force on the crate immediately to its left because it is attached to the crate with the largest mass. The force exerted by each subsequent rope on the crate immediately to its left decreases because the mass of the crates to their left decreases. Therefore, rope A exerts the second-largest force, followed by D, B, E, H, G, and C.

What is force?

Force is a physical quantity that describes the interaction between two objects or systems. It is defined as any influence that can cause an object to undergo a change in motion or shape.

Force can be represented as a vector, which means that it has both magnitude and direction. The standard unit of force is the newton (N) in the International System of Units (SI).

To know more about force, visit:

https://brainly.com/question/13191643

#SPJ1

The statement (D) "The time for 5 revolutions increased because the torque remained unchanged, but the rotational inertia increased." best describes what happened when the pulley diameter was increased.

Rotational inertia is the capacity of a rotating object to oppose a modification in its rotational motion. The larger the rotational inertia of an object, the more force must be added to accelerate it. Rotational inertia is determined by an object's mass distribution and the way it rotates around an axis.

In part 2 of the lab, the time for 5 revolutions increased because the torque remained unchanged, but the rotational inertia increased. When the pulley diameter increased, the pulley's moment of inertia increased as well, implying that the rotational inertia of the system increased. As a result, more torque was required to rotate the pulley, and the time for 5 revolutions also increased.

Learn more about pulley: https://brainly.com/question/1303344

#SPJ11

Answer:

Explanation:

Using Kirchhoff's laws, we can solve for the current i:

At the node where the 2Ω and 4Ω resistors meet, the current is split into two branches, i and i1. Applying Kirchhoff's current law (KCL), we have:

i + i1 = 12/2 = 6 A

At the loop with the 2Ω, 4Ω, and 5Ω resistors, applying Kirchhoff's voltage law (KVL), we have:

-20 + 2i + 4i1 + 5i1 = 0

-20 + 6i1 + 2i = 0

6i1 + 2i = 20

3i1 + i = 10

We can solve this system of equations by substitution, which gives:

i = 2 A

Therefore, the current through the 2Ω resistor is 2 A. The answer is (A) 2 A.

The frictional force acts opposite to the relative motion between two surfaces in contact. The magnitude of the frictional force (in N) acting on the cart is 41.16 N.

According to the given question, the force applied to the cart by the spring scale, Fa = 10.5 N. The cart is moving towards the right with an acceleration of 1.75 m/s2 towards the right. We need to find out the magnitude of the friction force (in N) acting on the cart.

We know that the frictional force (Ff) opposes the relative motion between two surfaces in contact. Hence, it acts in the opposite direction of motion or impending motion.

In this case, the cart is moving towards the right with an acceleration of 1.75 m/s2 towards the right. Therefore, the direction of frictional force will be towards the left, i.e., opposite to the direction of motion.

We can use the formula to find the magnitude of the frictional force:

Ff = μk x N

Where μk is the coefficient of kinetic friction and N is the normal force.

Since the cart is moving, we can consider that the frictional force acting on it is kinetic friction. Therefore, we can use the coefficient of kinetic friction to calculate the magnitude of the frictional force.

Now, we need to find the normal force, N.

N = m x g

Where m is the mass of the cart and g is the acceleration due to gravity.

We do not know the mass of the cart. However, we can find it using the force applied to it by the spring scale.

Fa = m x a

Where a is the acceleration of the cart.

Substituting the given values, we get:

10.5 N = m x 1.75 m/s2
m = 6 kg

Now, we can find the normal force:

N = m x g
N = 6 kg x 9.8 m/s2
N = 58.8 N

We have found the normal force, N. Now, we can use the coefficient of kinetic friction to find the magnitude of the frictional force.

The coefficient of kinetic friction can vary depending upon the nature of the surfaces in contact. Here, it is not mentioned, so let us assume a value for it. The coefficient of kinetic friction for rubber on concrete is approximately 0.7.

Therefore, the magnitude of the frictional force is:

Ff = μk x N
Ff = 0.7 x 58.8 N
Ff = 41.16 N

For more such questions on Frictional force.

https://brainly.com/question/14662717#

#SPJ11

A bar magnet falls under the influence of gravity along the axis of a long copper tube. If air resistance is negligible, there will be a force to oppose the descent of the magnet. The magnet will reach a terminal velocity. Here's why:

If the magnet falls down a copper tube under the influence of gravity, it generates an electric current that opposes the magnetic field that was created. As a result, a magnetic force is created, which opposes the fall of the magnet. As a result, there is a force opposing the descent of the magnet.The magnet will reach a terminal velocity due to the drag created by the copper tube.

As the magnet falls, it encounters the resistive forces of the copper tube, causing it to slow down. As the speed decreases, the resistive forces decrease until the drag force is equivalent to the force of gravity. The magnet then reaches a steady state called the terminal velocity. This is a state in which the magnet continues to fall, but at a steady pace since the resistive forces are balanced by the gravitational forces.

Learn more about magnetic force: https://brainly.com/question/29252577

#SPJ11

Answer:

ω = (k / m)^1/2        ω is proportional to the spring constant and inversely proportional to the mass (square root of these quantities)

ω = 2 π f

f = 1 / 2 π (k / m)^1/2       expression for frequency of mass m