calculate the molar absorptivity (ε) of a 5.0 x 10-4 m solution which has an absorbance of 0.20 when the path length is 1.3 cm?

Answers

Answer 1

The molar absorptivity (ε) of the given solution is 3.08 x 10⁴ L/(mol⋅cm).

The molar absorptivity (ε) is a measure of how strongly a particular chemical species absorbs light at a given wavelength. It is a characteristic of the species, the solvent, and the wavelength of light used.

The molar absorptivity is given by the Beer-Lambert Law, which states that the absorbance (A) of a solution is directly proportional to the concentration (c) of the absorbing species, the path length (l), and the molar absorptivity (ε) of the species, i.e.,

A = εcl

We are given the concentration of the solution as 5.0 x 10⁻⁴ M, the path length as 1.3 cm, and the absorbance as 0.20. Substituting these values in the above equation, we get:

ε = A / (cl) = 0.20 / (5.0 x 10⁻⁴ M x 1.3 cm) = 3.08 x 10⁴ L/(mol⋅cm)

learn more about molar absorptivity here:

https://brainly.com/question/31604678

#SPJ11


Related Questions

Arrange the steps of glycogen degradation in their proper order.

Hormonal signals trigger glycogen breakdown.

--------------------------------------------------------------
Glucose 6-phosphate undergoes further metabolic processing.

Which enzymes are required for glycogen degradation?

O phosphoglucomutase

O transferase

O glycogen phosphorylase

O phosphoglycerate mutase

O a-1,6-glucosidase

Answers

The breakdown of glycogen by the liver to maintain stable blood glucose levels requires phosphorylase kinase enzymes.

Glycogen deterioration is caused by what?

The body gets its energy primarily from glycogen. The liver houses glycogen storage. Enzymes are certain proteins that convert glycogen to glucose when the organism need extra energy. In the body, they release the glucose.

Depletion of glycogen is it beneficial?

You must avoid glycogen depletion. Due to extended periods of strenuous exercise, this occurs when the glycogen stores are depleted. you may not be eating enough carbohydrates. It will result in persistent fatigue, decreased strength, decreased endurance, and a general deterioration in athletic performance.

To know more about glycogen visit:

https://brainly.com/question/2396657

#SPJ4

Complete the following sentences on the acid-base properties of salts.

1. A salt consisting of the conjugate base of a ____________ and conjugate acid of a ____________ will be neutral since neither will react with water.

2. The salt consisting of the conjugate base of a ____________ and the conjugate acid of a ____________ will be acidic since the conjugate ____________ of a ____________ is acidic.

3. A salt consisting of the conjugate base of a ____________ and the conjugate acid of a ____________ will be basic since the conjugate ____________ of a ____________ is basic.

4. A salt consisting of the conjugate base of a ____________ and conjugate acid of a ____________ can be either acidic or basic depending on the relative Ka and Kb of the respective ions.

Word Bank: Weak base, Weak acid, Strong base, Base, Strong acid, Acid

Answers

The acid - base properties of the salt :'

1) Strong acids and strong base

2) Strong acid , weak base, acid and weak acid

3) Weak acid, strong base , base and the weak acid

4) Weak acid and the weak base

1) A salt consisting of the conjugate base of a strong acid and conjugate acid of a strong base will be neutral since neither will react with water.

2) The salt consisting of the conjugate base of a strong acid and the conjugate acid of a weak base will be acidic since the conjugate acid of a weak acid is acidic.

3) A salt consisting of the conjugate base of a weak acid and the conjugate acid of a strong base will be basic since the conjugate base of a weak acid is basic.

4) A salt consisting of the conjugate base of a weak acid and conjugate acid of a weak base can be either acidic or basic depending on the relative Ka and Kb of the respective ions.

To learn more about conjugate base here

https://brainly.com/question/12883745

#SPJ4

Based on the reading, what are the properties of carbon-14? Check all that apply.

Carbon-14 is a naturally occurring carbon isotope.
Carbon-14 has a known half-life.
Carbon-14 decays completely within 1,000 years.
Carbon-14 is not radioactive.
Carbon-14 is present in all living organisms.

Answers

To solve this we must be knowing each and every concept related to isotope. Therefore, the correct options are options A among all the given options.

What is isotope?

Every atom has an equal amount of protons and electrons, however isotopes are a little slightly weird because they contain variable quantities of neutrons while having an equal number of protons and electrons. Isotopes, however, differ in atomic mass while sharing the very same atomic number or place in the periodic table.

It is a naturally occurring (one parts per trillion) isotope.

It is radioactive, It has a half- life of 5,700 years.

It is found in all living organisms hence used for Carbon dating.

Therefore, the correct options are options A among all the given options.

To know more about isotope, here:

https://brainly.com/question/13662697

#SPJ1

Hannah is trying to figure out how tooth size is determined in two different wolves. In wolf 1, the copies of the gene are different from each other. In wolf 2, the copies of the gene are the same as each other. How does this affect how many types of proteins there are in each tooth cell?

A) Wolf 1 has one type of protein for the tooth size feature. Wolf 2 has one type of protein for the tooth size feature.

B) Wolf 1 has two types of protein for the tooth size feature. Wolf 2 has one type of protein for the tooth size feature.

C) Wolf 1 has two types of protein for the tooth size feature. Wolf 2 has two types of protein for the tooth size feature.

D) It is impossible to say anything about proteins from the given information.

Answers

The way the copies of the gene in the wolves affects the number of types of proteins in each tooth cell is B) Wolf 1 has two types of protein for the tooth size feature. Wolf 2 has one type of protein for the tooth size feature.

How does genes affect protein ?

The gene that determines tooth size in wolves is located on a specific chromosome, each individual has two copies of that chromosome, one inherited from each parent.

If the copies of the gene in Wolf 1 are different from each other, it means that the wolf is heterozygous for that gene, meaning it has two different versions of the gene, one inherited from each parent. This leads to the production of two different types of proteins in each tooth cell, and thus a variation of tooth size in Wolf 1.

If the copies of the gene in Wolf 2 are the same as each other, it means that the wolf is homozygous for that gene, meaning it has two identical copies of the gene inherited from the same parent.

Find out more on genes and proteins at https://brainly.com/question/3456729

#SPJ1

Complete the table below.
some binary molecular compounds
name; chemical formula
disulfur heptoxide; ___
sulfur tetroxide; ___
disulfur trioxide; ___
sulfur dioxide; SO2

Answers

The chemical name and the chemical formula of compound is menioned as : disulfur heptoxide; S2O7 ,sulfur tetroxide; SO4 , disulfur trioxide; S2O3  , sulfur dioxide ; SO2

Disulfur heptoxide is a binary molecular compound with the chemical formula S2O7. It is composed of two sulfur atoms and seven oxygen atoms. It is an unstable compound that exists only in the gaseous state, it is a powerful oxidizer and is highly reactive. It is often used as a reagent in laboratories and in industry, but it is not found naturally and is not used as a commercial product.

Sulfur tetroxide (SO4) is a binary molecular compound, which is composed of sulfur and oxygen atoms. It has the chemical formula SO4. It is a colorless solid or a colorless or yellowish liquid that has a pungent, suffocating odor and is hygroscopic. It is a strong oxidizing agent and is used in the production of sulfuric acid.

Disulfur trioxide (S2O3) is a binary molecular compound, which is composed of sulfur and oxygen atoms. It has the chemical formula S2O3. It is a highly unstable compound that is not found naturally, it is a powerful oxidizing agent and is highly reactive.

Sulfur dioxide (SO2) is a binary molecular compound, which is composed of sulfur and oxygen atoms. It has the chemical formula SO2. It is a colorless gas with a strong, choking odor. It is a reducing agent and is used as a preservative in food and wine, and as a reducing agent in various chemical reactions.

To know more about  Sulfur dioxide click below:

https://brainly.com/question/7072447#

#SPJ4

Convert 8.3 X 1022 molecules of carbon dioxide gas to grams.

22 is an EXPONENT Above

Answers

Answer:

Read below

Explanation:

Do a quick conversion: 1 mole CO2 = 44.0095 gram using the molecular weight calculator and the molar mass of CO2. Check the chart for more details.

According to the bohr model of the atom, the single electron of a hydrogen atom circles the nucleus...
a. in specific, allowed orbits.
b. in one fixed orbit at all times.
c. at any of an infinite number of distances, depending on its energy.
d. counterclockwise.

Answers

The protons and neutrons that make up the atom's nucleus account for the majority of the atom's mass according to the Bohr model.

What is meant by bohr model of the atom?

The Bohr model, also known as the Rutherford-Bohr model, was first proposed by Niels Bohr and Ernest Rutherford in 1913. It is a system made up of an orbiting nucleus that is compact and dense, surrounded by electrons, much like the Solar System.

Bohr was the first to realise that electrons move in various orbits around the nucleus and that the quantity of electrons in an element's outer orbit determines its properties.

In the Bohr model of the atom, the protons and neutrons that make up the nucleus are responsible for most of the atom's mass. The negatively charged electrons orbit the positively charged core, making up a small portion of the mass but being electrically comparable to the protons in the nucleus.

Therefore, the correct answer is option a. in specific, allowed orbits.

To learn more about bohr model refer to;

https://brainly.com/question/4138548

#SPJ4

Complete the chart. (Remember to enter a "0" if necessary.)
Atomic Number: 3

Answers

The electronic configuration of atomic number 3 will be, 1s²: 2s^1 with all the other slots filled in as 0.

What is electronic configuration?

The electron configuration is described as the distribution of electrons of an atom or molecule in atomic or molecular orbitals.

As we are given that the atomic number of an element is, 3. Now we have to determine the electronic configuration of an element that has the atomic number 3.

We know that the atomic number is equal to the number of protons or number of electrons.

So, the number of electrons the element has is equal to 3.

Therefore, the electronic configuration of atomic number 3 will be, 1s²: 2s^1 .

Learn more about electronic configuration at: https://brainly.com/question/26084288

#SPJ1

Complete question:

Complete the chart. (Remember to enter a 0 if necessary.) Atomic Number: 3 1s: 2s: 2p: 3s: 3p: 4s: 3d: 4p: 5s:

PLEASE HELPPPP!!
Lab Report
Motion and Forces

Introduction-
1. What was the purpose of the experiment?

2. What were the independent, dependent, and control variables in your investigation? Describe the variables for each part of the experiment.

3. Write a hypothesis based on observations and scientific principles.

Experimental Methods-
4. What tools did you use to collect your data?

5. Write your procedure. List each step so that another student could follow the procedure and repeat your experiment.

Data and Observations-
6. Record your observations.

Conclusions-
7. What conclusions can you draw about how the sum of forces acting on an object affect its motion? Write an evidence-based claim.

8. Which mass, A, B, or C, was the greatest? Use the observations from your experiment and your knowledge of Newton’s laws of motion to write an evidence-based claim.


9. Make a model that shows the forces acting on two blocks on a flat, frictionless surface:
A 1 N block at rest
A 1 N block with 2 N of force applied in one horizontal direction
Include arrows to represent the forces and labels to indicate the magnitude of each force. Use your model to compare and explain the motion of each block.

Answers

Answer:

The purpose of this experiment was to see how motion takes place as well as Force The independent was the second item used I think that what happened at the thing I used I took a ball and threw it on the ground from height distance I recorded the time Same height

A dragster, waits for the green light and speeds to 127 m/s in 11 seconds. What is the acceleration?

Answers

Answer: it would be x=7.5 m/s because you put x= 60-0 over 8 and i think dvide

how many moles of copper are 4.57 x 10^15 atoms of copper?

Answers

There will be  7.58*10^-9 moles of copper atoms in 4.57*10^15 atoms of copper.

what is meant by 1 mole?

A substance's mole is equivalent to 6.022 x 1023 of that material (such as atoms, molecules, or ions). The term "Avogadro's number" or "Avogadro's constant" refers to the number 6.022 1023. To convert between mass and the number of particles, use the mole concept.

What is the short definition of Avogadro's number?

Avogadro's number, which is equal to 6.02214076 1023, is the number of units in one mole of any material (defined as its molecular weight in grams). Depending on the substance and the nature of the reaction, the units may be electrons, atoms, ions, or molecules.

To know more about moles visit:

https://brainly.com/question/26416088

#SPJ1

a log is added to a camp fire and is bured. this is an example of a change.

Answers

Answer:

Chemical Change

Explanation:

A log is added to a camp fire and is burned. This is an example of a chemical change.

If a bond cleave next to the heteroatoms such as oxygen, sulfur and nitrogen generates a resonance stabilized cation. For instance, breaking the bond among carbon after alcohol radical generates a carbocation which is stabilized by resonance. This is named alpha cleavage and it is usually found in alcohols.

Answers

The Alpha cleavage of the alcohols is when a bond will cleave next to the heteroatoms to generates the resonance stabilization of the cation. This cleavage generally found in the alcohols.

The bond cleavage next to the heteroatoms like as oxygen, sulfur and the nitrogen will generates the cations that is resonance stabilize. The cleavage of bond in between the  carbon and the carbon that is next to atom generated the cation and it is resonance stabilized. This Alpha bond cleavage is generally found in the alcohols.

Thus, the alpha bond cleavage is breaking of the carbon - carbon bond that is adjacent to carbon attached to the functional group.

To learn more about bond cleavage here

https://brainly.com/question/16234946

#SPJ4

How many moles of o2 are needed to react with 12 moles of c2h6?2C2H6 + 702 — 4CO2 + 6H20

Answers

21 moles of O2 are needed to react with 12 moles of C2H6.

The balanced chemical equation for the combustion of ethane (C2H6) is:

2C2H6 + 7O2 -> 4CO2 + 6H2O.

From the balanced equation, we can see that for every 2 moles of C2H6 that react, 7 moles of O2 are needed.

Since you have 12 moles of C2H6, the number of moles of O2 needed for the reaction would be:

12 moles C2H6 / 2 moles C2H6/7 moles O2 = 12 moles C2H6 / 2/7 moles O2 = 12*7/2 = 42/2 = 21 moles O2.

Therefore, 21 moles of O2 are needed to react with 12 moles of C2H6.

To learn more problems on moles:

https://brainly.com/question/14357742

#SPJ4

Copper metal, Cu(s), will spontaneously reduce which of the following?

a) Fe2+ and Ag+

b) Fe2+

c) Ag+

d) Al3+

e) Fe2+ and Al3+

Answers

Cu(s), will spontaneously reduce Fe2+ and Ag+. Thus option A is the answer.

A redox (reduction-oxidation) reaction is a chemical reaction in which one species (the reducing agent) loses electrons, while another species (the oxidizing agent) gains electrons. The reducing agent is said to be reduced, while the oxidizing agent is said to be "oxidized." In this case, copper metal, Cu(s), is the reducing agent, and [tex]Fe2+[/tex] and [tex]Ag+[/tex] are the oxidizing agents.

In the redox reaction, copper metal will lose electrons and is oxidized to Cu2+. The Fe2+ and Ag+ ions will gain electrons and be reduced to Fe and Ag, respectively. This process is spontaneous because the final state of the reaction is more stable than the initial state.

The reaction can be written as:

[tex]Cu(s) + Fe^{2+} -- > Cu^{2+} + Fe(s)[/tex]

[tex]Cu(s) + Fe^{2+} -- > Cu^{2+} + Fe(s)[/tex]

In summary, copper metal is a stronger reducing agent than Fe2+ and Ag+ ions, which is why the reaction is spontaneous.

Learn more about Copper:

https://brainly.com/question/19761029

#SPJ4

What is the chemical energy - storage molecule produced from photosynthesis ?

Answers

Photosynthesis is essential among most life on the planet. Plants, algae, as well as some kinds of bacteria carry out the process by capturing solar energy to create oxygen (O2) as well as chemical energy stored within glucose (a sugar).

Adenosine triphosphate (ATP), the primary energy-storing molecule within living things, transforms solar energy into chemical energy. The chemical energy required to drive further metabolic reactions would then be provided by ATP, which has been carried throughout the chloroplast.

The thylakoid membrane is the site of light-dependent processes. They need light to function, and their overall conversion of water molecules towards oxygen produces ATP molecules through ADP and Pi as well as NADPH molecules out from reduction of NADP+.

To know more about Photosynthesis

https://brainly.com/question/29764662

#SPJ4

When 2 moles of ammonia ([tex]NH_{3}[/tex]) decomposes into nitrogen gas ([tex]N_{2}[/tex]) and hydrogen gas ([tex]H_{2}[/tex]), how many moles of nitrogen gas are produced?


- 1 mole

- 2 moles

- 3 moles

- 4 moles


When 2 moles of ammonia ([tex]NH_{3}[/tex]) decomposes into nitrogen gas ([tex]N_{2}[/tex]) and hydrogen gas ([tex]H_{2}[/tex]), how many hydrogen gas are produced?

- 1 mole

- 2 moles

- 3 moles

- 4 moles

Answers

Two moles of ammonia result in one mole of nitrogen and three moles of hydrogen. This process is endothermic.

How many moles of ammonia can you make from 2 moles of nitrogen gas?When we combine two moles of nitrogen with six moles of hydrogen, we get two moles of ammonia.Nitrogen gas and hydrogen gas are produced during the decomposition of ammonia. Two moles of ammonia result in one mole of nitrogen and three moles of hydrogen. This process is endothermic.It takes 6 moles of "H (2)" to produce 4 moles of ammonia, which is equal to "3/cancel(2) xx cancel(4(2))".There are three hydrogen atoms in a mole of NH3. Therefore, there are 6 hydrogen atoms in two moles.

To learn more about ammonia refer to:

https://brainly.com/question/14445062

#SPJ1

A solid whose molecules are arranged in a repeating pattern, is called?

Answers

Answer:

Crystalline solids

Explanation:

hope this helps

Arrange the liquids ethanol (C2H5OH), glycerol [HOCH2CH(OH)CH2OH], and ethylene glycol (CH2OH)2 in decreasing order of expected viscosities.

Answers

The decreasing order of viscosity of the given liquids is as glycerol, ethylene glycol, and ethanol.

Viscosity is the resistance of a fluid to change shape or flow when compared to other liquids. So the fluid with high viscosity will have low fluidity. The main reason for increased viscosity will be due to the molecular interactions . Viscosity can also be defined as the ease with which the molecules can move concerning one another. That means the more the interaction between molecules, the more viscosity.

In the case of the given liquids, all have OH groups, which could result in hydrogen bonding. So more the hydroxyl groups, the more the hydrogen bonding, the more interaction, and high the viscosity. Here glycerol has three OH groups, So it will have the highest viscosity. The ethylene glycol with two OH groups comes second and then ethanol.

So the decreasing order of viscosity will be, Glycerol, Ethylene glycol, and Ethanol.

For further information regarding Viscosity, Kindly refer

https://brainly.com/question/2193315

#SPJ4

How many grams does 8.92 x 1024 atoms of tin weigh?

Answers

I apologize, I made an error in my previous response. 8.92 x 1024 atoms of tin would actually weigh approximately 5.26 x 10^25 grams.

To calculate this, you can use the formula:

Weight (in grams) = Number of atoms x Atomic weight (in grams/mol)

The atomic weight of tin is 118.710 g/mol. So,

Weight (in grams) = 8.92 x 1024 atoms x 118.710 g/mol

Weight (in grams) = 1.05 x 10^26 g

Weight (in grams) ≈ 5.26 x 10^25 g

Keep in mind that this is an extremely large weight and not practically measurable as it's equivalent to 5.26 x 10^25 tons.

Write a statement that summarizes the results of the experiment.

Answers

Scientific law is a brief assertion that condenses the findings of several observations and experiments.

How do you summarize the results of an experiment?

Give a general overview of the subject at hand, referencing any pertinent research. Give an explanation of how your experiment might add to earlier discoveries. Shorten the introduction. Try to keep your experiment's specific methodology and data a secret.

Along with tabulating the data and diagramming the process, it also describes how it was done. A science project should demonstrate whether the experiment was effective or not and make suggestions for additional research. A science project summary should make the project easier to understand for others.

The goal of summarization is to condense a large body of text. Either unnecessary or extraneous content has to be removed, or the most important portion of a lengthy paper is to be made immediately obvious.

To learn more Experiment refer to:

https://brainly.com/question/30055326

#SPJ1

Draw the structure of acetylsalicylic acid. Circle the ester group. List two things which might be done in order to help facilitate the recrystallization of acetylsalicylic acid. What did your ferric chloride test indicate? List several common inert ingredients of aspirin.

Answers

Acetylsalicylic acid (ASA) is commonly known as Aspirin. Its structure contains a benzene ring on the left side and two functional groups, carboxylic acid and ester group linked to it.

The molecular formula of acetylsalicylic acid is C₉H₈O₄ and the expanded formula is CH₃COOC₆H₄COOH.

The crude aspirin should be dissolved in a small amount of warm ethanol to aid in the recrystallization of acetylsalicylic acid. Water will then be added, and the solution will be gradually cooled and chilled. The ASA will recrystallize, leaving the solid impurities dissolved in the solution.

The ferric chloride test detects the presence of phenol. The formation of purple color indicates a positive test result.

Several common inert ingredients of aspirin are:

Colloidal silicon dioxideCornstarchCroscarmellose sodiumHypromelloseIron oxide red Microcrystalline cellulosePolyethylene glycolPolysorbate 80Stearic acid Titanium dioxide

Learn more about recrystallization here

https://brainly.com/question/15703840

#SPJ4

Consider these chemical equations. n2(g) + 3h2(g) → 2nh3(g) c(s) + 2h2(g) → ch4(g) 4h2(g) + 2c(s) + n2(g) → 2hcn(g) + 3h2(g) which equation(s) do you need to reverse in order to calculate the overall equation for the formation of hcn and h2 from nh3 and ch4? check all that apply. a. n2(g) + 3h2(g) right arrow 2nh3(g) b. c(s) + 2h2(g) right arrow ch4(g)c. 4h2(g) + 2c(s) n2(g) right arrow 2hcn(g) + 3h2(g)

Answers

Equation 2, i.e. C+ 2H2= CH4, and equation 1 i.e.N2+3H2=2NH3 have to be reversed to obtain the overall equation. Thus, options A and B are correct.

According to chemical symbolization, the definition of a chemical equation is a reaction that results in the formation of products. The creation of the consequent reaction has been caused by the inclusion of several steps in the appropriate order.

chemical formulas

The picture that is attached has the given chemical formulae.

The graphic that is included provides the anticipated final response.

Methane and ammonia served as the reactant in the subsequent reaction, which produced carbon and hydrogen.

Methane has been on the product side of equation 2 and ammonia has been on the product side of equation 1.

Thus, equation 2, i.e. C+ 2H2= CH4, and equation 1 i.e.N2+3H2=2NH3 have to be reversed to obtain the overall equation. Thus, options A and B are correct.

Learn more about the chemical equations, here:

brainly.com/question/12982745

#SPJ4

Answer:

A and B,     A,  C

Explanation:

Draw the Lewis structure of SF5+ on paper.

(a) What is the total number of electron pairs in this Lewis structure?

(b) What is the number of nonbonding electron pairs on the central atom?

(c) What is the geometry of the electron pairs around the central atom?

(d) What is the geometry of the molecule?

Answers

SF holds ten elections in the central Splunk atam In a tigenal two - tier structure structure, this indicates there are 5 electron pairs annanged. Two are exidl and three of a Fluonne are equatonal.

What are electron pairs used for?

Each atom in a bond between two atoms will share 1 electron. The electrons taking part in this connection are referred to as the electron bond pairs. Example: All four hydrogen atoms in the methane molecule form a bond link with the central carbon atom.

What do lone pair and an electron pair mean?

Bond pairs refer to the shared electron pairs that exist between the bound atoms. Bonding may not involve all of the valence electrons. Lone pair of electrons are defined as electron pairs without a partner in a bond. For instance, there really are seven bond pairings but no lone pair in C2H6 (ethane).

To know more about electron pairs visit:

https://brainly.com/question/19168427

#SPJ4

The image below shows two types of plant cells under a microscope.

root cells and leaf cells

Which statement explains the difference in chloroplasts between the two types of plant cells?

Answers

Unlike the leaf cells, the root cells have no chloroplasts because root cells do not need to produce or use energy. Option A

What is the cell?

We have to note that the cell is the smallest part of an organism that can have independent existence. We know that the microscope is the device that we can be able to use to view the cells.

Now, we know that the cell is composed of the organelles of the cell. The organelles of the cell include the chloroplast of the cell as well as the cell wall of the cell.

Learn more about cell:https://brainly.com/question/30046049

#SPJ1

Missing parts;

The image below shows two types of plant cells under a microscope.

root cells and leaf cells

Which statement explains the difference in chloroplasts between the two types of plant cells?

A.

Unlike the leaf cells, the root cells have no chloroplasts because root cells do not need to produce or use energy.

B.

Unlike the root cells, the leaf cells have many chloroplasts because leaf cells produce sugars for the plant.

C.

The root cells have smaller chloroplasts because root cells do not need to store food and water.

D.

The leaf cells have larger chloroplasts because leaf cells need more support and a stronger structure.

What part of the small intestine is the most important for nutrient absorption and what else occurs at this location what makes the small intestine unique?

Answers

Part of the small intestine is the most important for nutrient absorption is the jejunum and what else occurs at this location what makes the small intestine unique is it contains villi which increase the surface area to aid absorption.

The small intestine is part of the digestive tract which consists of villi, circular muscles, longitudinal muscles, mucous lining, and epithelium. In the small intestine, a chemical digestion process occurs where enzymes break down complex organic matter molecules into simpler molecules which are then absorbed by the epithelial cells.

Jejunum is part of the small intestine which is red in color because it contains lots of blood vessels and is located between the duodenum and ileum. Jejunum is the most important part of the small intestine because it absorbs most of the nutrients from food and water so that it can be used by the body. In the jejunum there are folds or projections called villi. Villi function to expand the surface of the small intestine which helps the absorption process.

Learn more about digestive system at:

https://brainly.com/question/10457697

#SPJ4

Arrange the following compounds in order of decreasing boiling point. Rank from largest to smallest.

Answers

Sort the items in ascending size. Alcohol (primary>secondary>tertiary) > Amines (primary>secondary>tertiary) compounds with a lower boiling point are ALKANES in that order.

What exactly is indeed a compound element?

A compound in chemistry is a substance composed of two or more separate chemical elements mixed together in a certain proportion. When the elements are combined, they react with one another and create chemical connections that are challenging to dissolve. These bonds are formed as a result as atoms sharing or trading electrons.

How are compounds made?

Whenever a group of atoms unite to form a pure material, compounds are created. These can be reduced to their component atoms. The atoms of a reactants interact during chemical reactions to create new compounds. Reacting species are known as reactants, while the results of the reaction are known as products.

To know more about compound visit:
https://brainly.com/question/13516179

#SPJ4

The correct question is

List the following compounds in order of decreasing boiling point: Rank from largest to smallest. To rank items as equivalent, overlap them.

This immense range began to form between 40 and 50 million years ago when two large landmasses India and Eurasia driven by plate movement interacted

Answers

This immense mountain range began to form between 40 and 50 million years ago, when two large landmasses, India and Eurasia, driven by plate movement, collided is referred to as Himalaya and is therefore denoted as option B.

What is a Mountain?

This is referred to as an elevated portion of the Earth's crust, generally with steep sides that show significant exposed bedrock.

The pressure of the impinging plates from the immense mountain ranges when India and Eurasia collided and was relieved by thrusting skyward, formed what is known as the Himalaya mountains which is why option B was chosen as the correct choice.

Read more about Himalaya here https://brainly.com/question/536493

#SPJ1

The full question is:

This immense mountain range began to form between 40 and 50 million years ago, when two large landmasses, India and Eurasia, driven by plate movement, collided. Because both these continental landmasses have about the same density, one plate could not be subducted under the other. The pressure of the impinging plates could only be relieved by thrusting skyward, and forming the _______________ Mountains.

A) Eurasian

B) Himalaya

C) Rocky

D) Ural

In a 100.0 g a sample of a compound containing only copper and sulfur There are found to be 79.9 Of copper and 20.1 g of sulfur

Answers

A sample of a compound made up exclusively of copper and sulphur weighing 100.0 g was discovered to contain 79.9 g of copper, 20.1 g of sulphur, and 20.01 g of M(s).

What do you mean compound?

In chemistry, a compound is a substance made up of two or more different chemical elements that have been combined together in a specific ratio. When the elements interact with one another, difficult-to-break chemical bonds are formed. a substance produced chemically by combining two or more different elements. Examples of compounds are table salt (NaCl), which is generated from the elements sodium and chloride, and water (H2O), which is created from the components hydrogen and oxygen.

What is not a compound?

A compound is a chemical entity made up of numerous identical molecules bound together by chemical bonds and made up of atoms from different elements. A molecule is not regarded as a compound if it solely contains atoms from one element.

m = mcompound * W

m(Cu) = 100 g * 0.799 = 79.0* g

M(S) = 100 g * 0.201 = 20.01 g.

To know more about Compound visit:

https://brainly.com/question/13516179

#SPJ1

A sample compound with a formula mass of 34. 00 amu is found to consist of 0. 44 g h and 6. 92 g o. Find its molecular formula.

Answers

The molecular formula of the compound has been [tex]$\mathrm{H}_2 \mathrm{O}_2$[/tex].

How to estimate molecular formula?

By calculating the moles of the molecule using the empirical formula, the molecular formula of a chemical has been determined.

The moles of the compound has been given by:

[tex]$\text { Moles }=\frac{\text { Mass }}{\text { Molar mass }}$$[/tex]

The moles of hydrogen in [tex]$\mathbf{0 . 4 4} \mathbf{~ g}$[/tex] :

Moles [tex]$=\frac{0.44}{1}$[/tex] Moles = 0.44 mol

The moles of hydrogen in the compound have been 0.44 mol.

The moles of oxygen in 6.92 gram has been:

Moles [tex]$=\frac{6.92}{16}$[/tex]

Moles [tex]$=0.44 \mathrm{~mol}$[/tex]

The moles of oxygen in the compound have been [tex]$\mathbf{0 . 4 4} \mathrm{mol}$[/tex].

The moles have been equivalent to the empirical formula of the compound has been OH.

The mass of the compound has been 34 g/mol.

The mass of the empirical formula has been 17 g.

The formula unit of empirical formula has been:

Formula unit [tex]$=\frac{34}{17}$[/tex]

Formula unit = 2

The molecular formula of the compound has been [tex]$\mathrm{H}_2 \mathrm{O}_2$[/tex].

To learn more about molecular formulas, refer to:

brainly.com/question/1247523

#SPJ4

Other Questions
Chocolate bars are on sale for the prices shown in this stem-and-leaf plot.Cost of a Chocolate Bar (in cents) at Several Different StoresStemLeaf7785 5 7 8 993 3 3100 5 _____ prepares expatriates for return to the parent company and home country from the foreign assignment. A. Repatriation B. Immigration C. Emigration when you arrive at the receiving facility, the nurse asks your partner for a verbal report of the patient's condition. this is in addition to the radio report your partner gave to the hospital en route. afterwards, you ask your partner why you must give a second verbal report and a written report to the receiving nurse. what is the best reason to provide both reports? a. the nurse may not have heard the first radio report. b. the nurse may be too busy to read the written report. c. the nurse may have to perform critical interventions on the patient before you complete your written report. d. the patient's condition may have changed since the first radio report. 14. A student compared the language skills and mental development of two groups of 24-month-old children. One group consisted of children identified as talkative, and the other group consisted of children identified as quiet. The scores for the two groups on a test that measured language skills are shown in the table below. 70 70 65 85 85 80 90 90 60 Talkative. 75 Quiet 80 75 70 65 90 90 75 85 75 80 Assuming that it is reasonable to regard the groups as simple random samples and that the other conditions for inference are met, what statistical test should be used to determine if there is a significant difference in the average test score of talkative and quiet children at the age of 24 months? aire denc B) A chi-square test of independence. D) A two-sample t-test for means 20 A) A chi-square goodness of fit test C) A matched-pairs t-test for means E) A linear regression t-test Let be the population mean of excess weight amongst Australians. The hypotheses for the required test are(a) H0 : > 10 against HA : = 10(b) H0 : > 10 against HA : 10(c) H0 : = 10 against HA : > 10(d) H0 : = 10 against HA : 10(e) none of these (a) Derive the mean stock price in the Cox-Ross-Rubinstein model using MGF method. (b) What is the mean and variance of a stock's price after 8 time periods with initial price S, = $100 and parameters u =1.01, d =0.99, and p=0.51?(c) Refer to (b), approximate the probability that the stock's price will be up at least 30% after 1000 time periods. the largest number of advertisements use this approach to grab our attention and appeal to us as consumers: the need for affiliation. true or false determine whether the improper integral diverges or converges. f [infinity]/0 1/e^2x e^-2x dx converges diverges Solve the equation x + x = 132 using a trial and improvement method. You MUST show all your working. assuming that the population was in hardy-weinberg equilibrium for the g locus, what was the frequency of allele g in the gray moths that emerged in 1980? A. 0.33 B. 0.50 C. 0.67 D. 0.75 what type of domain name system (dns) record holds information such as 2001:4860:4860:8888? mergesort is a complicated process, but what is it actually doing? we are going to take a closer look at the process in this exercise. you are given the merge sort algorithm and you need to add some print statements so that you can see what actually is happening. 9. In a chemical reaction, the percentage yield was 90.0% and the theoretical yield was 1.0g. What was the actual yield of the reaction?10. The percentage yield for the reaction below is 83.2%. What mass of PCls is expected from the reaction of 73.7 g PC13 with excess chlorine?PC13 + Cl2 PCls Using questions 14 and 15, the Energy lost into heat (J) during the collision of the bullet and catcher is: O 870 O 222 O 0 O 8.7 O 87 O145 O 10 O 3.5 Make a list of the four quantum numbers n, l, ml, and s for each of the 12 electrons in the ground state of the magnesium atom. Check all that apply.A. n = 1, l = 0, ml = 0, s = 1/2B. n = 3, l = 2, ml = 0, s = 1/2C. n = 2, l = 1, ml = 0, s 1/2D. n = 1, l = 0, ml = 1, s = 1/2E. n = 3, l = 1, ml = 1, s = 1/2F. n = 2, l = 1, ml = -1, s = 1/2G. n = 2, l= 1, ml = 1, s = 1/2 Discuss the benefits and challenges of simulation technology as a technology trend The second factor that will result in 20x+10y when the two factors are multiplied The B-52 is an aircraft used by the U.S. military in armed conflict. Based on this information, what kind of good is a B-52 aircraft?Select one:a. Common resourceb. Private goodc. Public goodd. Club good A spinner with three equal size sections labeled red, green, and yellow isspun once. Then a coin is tossed, and one of two cards labeled with a 1 ora 2 is selected. What is the probability of spinning yellow, tossing heads,and selecting the number 2? a stock has an expected return of 15.9 percent and a beta of 1.70, and the expected return on the market is 10.10 percent. what must the risk-free rate be? (