calculate the number of moles in 2.3gram of sodium (Na=23).
​

The frequency of photon released for an ionized helium atom during transition from second to the first orbit is 9.89 x 10^15 Hz.

The energy of a photon is given by Rydberg formula,

[tex]\dfrac{1}{\lambda} = R [\[\dfrac{1}{n_1^2} - \dfrac{1}{n_2^2}\]][/tex]

where λ is wavelength, R is the Rydberg constant, n1, n2 are the initial and final quantum numbers.

For a transition from the second to first orbit, n1 = 2 and n2 = 1.

Using Rydberg formula,

[tex]\dfrac{1}{\lambda} = 1.0974 \times 10^7 [\[\dfrac{1}{2^2} - \dfrac{1}{1^2}\]][/tex]

Solving for λ,

λ = (4/3R) = 30.37 nm

The frequency of the photon,

ν = c/λ

where c is the speed of light and ν is the frequency.

Frequency = ν = c/λ

= (3.00 x 10^8 m/s) / (30.37 x 10^-9 m)

= 9.89 x 10^15 Hz

To know more about the photons, here

brainly.com/question/13436020

#SPJ4

--The complete question is, Calculate the frequency of the photon released for an ionized helium atom (it has a single electron) when the electron transitions from second orbit to first orbit.--

Ca + Cl₂ ⇒ CaCl₂ equation represents this chemical reaction. Therefore, option C is correct.

The term chemical reaction is defined as a process that alters one or more substances, called as reactants, to one or more various substances, called as products.

Chemical changes occur when bonds are broken and produce between molecules or atoms.That means that one substance with a certain set of properties is convert into a different substance with different properties.

The reaction of Calcium metal (Ca) and chlorine gas (Cl₂) react with each other to form calcium chloride (CaCl₂) is Ca + Cl₂ ⇒ CaCl₂ .

Thus, option C is correct.

To learn more about the chemical reaction, follow the link;

https://brainly.com/question/22817140

#SPJ9

a) Reactants = 2NO, O₂ Products = 2NO₂ b) The balanced chemical equation is, 2NO + O₂ ---> 2NO₂. c) It is a combination reaction.

The Reactants in the reaction are 2NO, O₂ and products in the reaction is 2NO₂. The reaction is a combination reaction. Combination reactions can be exothermic or endothermic, depending on the specific reaction. Exothermic combination reactions release energy, usually in the form of heat or light, while endothermic combination reactions absorb energy.

The balanced chemical equation is, 2NO + O₂ ---> 2NO₂.

If we see the reaction 2NO + O₂ ---> 2NO₂ then we see that two molecules react and formed a single combined compound.

So it is combination reaction.

To know more about the combination reaction, here

brainly.com/question/3664113

#SPJ4

Among the options provided, the compound that would be expected to have the lowest solubility in water is (D.) BaSO4 (barium sulfate)

The solubility of a compound in water depends on its ability to interact with water molecules. Compounds that can form strong interactions with water, such as through hydrogen bonding, tend to be more soluble in water. On the other hand, compounds that cannot form strong interactions with water tend to be less soluble.

BaSO₄ (barium sulfate) have the lowest solubility in water. This is because BaSO₄ is a salt of a strong base (Ba (OH)₂) and a weak acid (H2SO₄), which makes it a weak electrolyte. As a result, it does not dissociate easily in water, and its ions do not interact strongly with water molecules. Additionally, BaSO₄ is an ionic compound with a large lattice energy, which further reduces its solubility in water.

In contrast, CsI, KCl, and NaBr are all ionic compounds that can easily dissociate in water, forming ions that can interact with water molecules through ion-dipole interactions. RbOH is a polar covalent compound that can form hydrogen bonds with water molecules, which also makes it relatively more soluble in water.

To know more about hydrogen bonds, visit:

https://brainly.com/question/10904296

#SPJ1

The percent ionization for propionic acid in each of cases are given below:

Part A. 0.704%

Part B. 1.31%

Part C. 2.61 %

Percent ionization is defined as the quantity of a weak acid that ionizes in a solution expressed as a percentage.

Percent ionization can be calculated using the following expression.

α% = √(Ka/Ca) × 100%

where,

α% is the percent ionization.

Ka is the acid dissociation constant (1.34 × 10⁻⁵ for propionic acid).

Ca is the concentration of the acid.

For Part A. 0.250 M

α% = √(1.34 × 10⁻⁵/0.250) × 100% = 0.704%

Part B. 7.84 × 10⁻² M

α% = √(1.34 × 10⁻⁵/7.74 × 10⁻²) × 100% = 1.31 %

Part C. 1.97 × 10⁻² M

α% = √(1.34 × 10⁻⁵/2.03 × 10⁻²) × 100% = 2.61 %

Learn more about ionization from the link given below.

https://brainly.com/question/8907473

#SPJ4

Answer:

c) It has no partially-filled orbitals.

Explanation:

Diamagnetic salts are those that do not contain any partially-filled orbitals in their electronic configuration. This is because the electrons in these salts are paired and cancel each other's magnetic fields, making the compound diamagnetic. The number of electrons or the number of filled orbitals does not determine whether a salt is diamagnetic or not. Rather, it is the presence or absence of partially-filled orbitals that determines this property.

The volume of the sodium chloride solution in the flask is 112.3 mL.

To find the volume of the sodium chloride solution in the Erlenmeyer flask, we first need to find the mass of the solution. We can do this by subtracting the mass of the empty flask from the mass of the filled flask:

Mass of solution = 428.6 g - 232.7 g = 195.9 g

Next, we can use the density of the solution to find the volume.

Density is defined as mass divided by volume, so we can rearrange the equation to solve for volume:

Volume = Mass / Density = 195.9 g / 1.744 g/mL = 112.3 mL

Finally, we can round our answer to one place after the decimal:

Volume = 112.3 mL ≈ 112.3 mL

So the volume of the sodium chloride solution in the flask is 112.3 mL.

To know more about volumes, refer here:

https://brainly.com/question/952755#

#SPJ11

The kind of study is a cohort study.

A cohort study is a type of observational study in which a group of individuals (the cohort) with a common characteristic or experience are followed over a period of time to investigate the development of a particular health outcome or disease.

Cohort studies can be prospective (following the cohort from the present into the future) or retrospective (looking back in time to study past exposures and outcomes). They can be used to examine the incidence, prevalence, and risk factors of diseases, and are particularly useful for investigating rare exposures or outcomes.

Learn more about Cohort study:https://brainly.com/question/9429879

#SPJ1

Answer: A stove that circulates heated air to uniformly cook food is an example of convection heat transfer.

Box C in the circular flow model represents households, or consumers.

In the circular flow model, households are shown as the source of spending and demand for goods and services in the economy.

The model depicts a continuous flow of money from households to firms, in exchange for goods and services, and then from firms back to households as wages and profits. Box C is typically depicted as one of two boxes on either side of the model, representing either households or firms. The other box, Box F, typically represents firms, or producers.

Therefore, the correct answer is as given above. It could then be concluded that the correct answer is that Box C in the circular flow model represents households, or consumers.

learn more about circular flow model: https://brainly.com/question/1433471

#SPJ1

The macromolecules that are characteristically water insoluble is the correct option is lipids.

The macromolecule are the molecule that are extraordinarily large. They may be organic materials such as the sugars and the natural fibers or the synthetic materials such as the  plastics, the synthetic fibers, Lipids, the proteins, the nucleic, and carbohydrates .  The lipids are water hating. They are water insoluble.

The lipids are the non polar compound and the water is the polar compound. The polar will dissolve the polar compounds and the non polar will dissolves the non polar compound. Therefore the lipids are insoluble in the water.

To learn more about lipids here

https://brainly.com/question/3498396

#SPJ4

The stage that this most accurately describes while using the PCR is the initiation of DNA synthesis, also known as the denaturation stage.

In the denaturation stage of Polymerase Chain Reaction (PCR), the double-stranded DNA template is heated to a high temperature to separate the two complementary strands and create single-stranded DNA. The denaturation stage is the first step in the PCR cycle.

In this stage, the heat-stable DNA polymerase denatures the DNA and the primers anneal to the complementary single-stranded template. This marks the beginning of the extension stage, where the DNA polymerase synthesizes new complementary strands along the template DNA.

Learn more on denaturation stage here: https://brainly.com/question/27493294

#SPJ1

(a) Kp = 57.2. (b) Equilibrium favors products as Kp > Qp. Forward reaction is favored.

(a) The value of Kp at 450 K can be calculated using the equilibrium expression:

Kp = (PPCl5) / (PPCl3 x PCl2)

Substituting the given equilibrium pressures into this expression, we get:

Kp = (1.14 atm) / (0.122 atm x 0.140 atm) = 57.2

Therefore, the value of Kp at 450 K is 57.2.

(b) To determine whether the equilibrium favors reactants or products, we can compare the calculated value of Kp to the reaction quotient, Qp.

Qp can be calculated in the same way as Kp, using the current partial pressures of the gases at equilibrium. Substituting the given equilibrium pressures, we get:

Qp = (PPCl5) / (PPCl3 x PCl2) = (1.14 atm) / (0.122 atm x 0.140 atm) = 9.23

Since Kp > Qp, the equilibrium favors products. This means that at the given temperature, the forward reaction (formation of PCl5) is favored over the reverse reaction (breakdown of PCl5 into PCl3 and Cl2), and the system has reached a state where the concentrations of products are higher than the concentrations of reactants.

Learn more about partial pressures :

https://brainly.com/question/13199169

#SPJ4

The complete question is :

Phosphorus trichloride gas and chlorine gas react to form phosphorus pentachloride gas. PCl3(g) + Cl2(g) PCl5(g). A gas vessel is charged with a mixture of PCl3(g) and Cl2(g), which is allowed to equilibriate at 450 K. At equilibrium the partial pressures of the three gases are PPCl3 = 0.122 atm, PCl2 = 0.140 atm, and PPCl5 = 1.14 atm.

(a) What is the value of Kp at this temperature?

(b) Does the equilibrium favor reactants or products?

The equilibrium favors products. The equilibrium favors reactants. Neither reactants nor products are favored.

The koff value for this reaction is 1.314 s-1

The concentration of bound and unbound ligands can be connected to the dissociation constant (Kd) of the protein-ligand complex using the equilibrium equation shown below:

Kd = (P)(L)/(PL)

Since we know that half of the protein is ligand-bound at equilibrium, [PL] = [P]/2. Moreover, we are aware that [L] = 0.657 nM.

Using these values as a substitute in the equilibrium equation, we obtain:

Kd = [P][L]/[PL] = [P](0.657 nM)/(0.5[P]), which equals 1.314 nM.

The following equation can also be used to link the association (kon) and dissociation (koff) rate constants to the dissociation constant (Kd):

Koff/Kon = Kd

When we solve for koff, we get:

1.314 nM * kon = koff = Kd * kon

We can use a value of 106 M-1s-1 for kon as we are presuming that the kon value is common for protein-ligand interactions. If we substitute this value, we obtain:

koff is equal to 1.314 nM x 106 M-1 s-1 / 1.314 s-1.

therefore, 1.314 s-1 is the koff value for this protein-ligand binding process.

learn more about the dissociation constant

brainly.com/question/28197409

#SPJ4

Molecular polarity is important for life because it plays a crucial role in many biological processes.

Molecular polarity refers to the distribution of electrical charge within a molecule. It is a property that results from differences in the electronegativity of the atoms in a molecule.

Molecular polarity is important for life because many biological molecules, including proteins, DNA, and carbohydrates, are polar, meaning they have regions of positive and negative charge.

This allows them to interact with other polar molecules, such as water, through hydrogen bonding, which helps to stabilize their structures and maintain their functionalities.

More on molecular polarity can be found here: https://brainly.com/question/4248472

#SPJ1

Answer:

D. Gold and copper

From the table, the two metals which heat up about the same rate are iron and copper. These two metals have about close specific heat of capacities. Thus, they will cool or heat up in closer rates.

Specific heat of capacity of a substance is the heat energy required to raise the temperature by one degree Celsius per one gram. It is an intensive quantity and does not depends on  the amount of the substance.

The specific heat of the substance indicates the rate at which the substance cools down or heats up. It depends on the nature of the substance and its bond type.

Here, the two metals having closer specific heat capacities are iron and copper. Copper has specific heat of 0.39 and iron has 0.46 J/g° C. Hence, they will heats up in about same rates. Therefore, option C is correct.

Find more on specific heat:

https://brainly.com/question/11297584

#SPJ2

The rate of a reaction depends upon the concentration of the reactants. If a compound is being consumed in a reaction, the rate constant for that compound decreases.

The rate constant or specific reaction rate of the reaction at a given temperature is defined as the rate of the reaction when the molar concentration of each of the reactants is unity.

The reaction rate is directly related to rate constant. The rate of a reaction decreases as the concentration of the reactants decreases with time. Here since the reactants are consumed, then the rate constant decreases.

Thus If a compound is being consumed, rate constant decreases.

To know more about rate constant, visit;

https://brainly.com/question/24658842

#SPJ1

The experimental procedure used to study how attention affects the processing of competing stimuli would be dichotic listening.

Dichotic listening is an experimental technique used to study selective attention in the auditory domain.

In a typical dichotic listening task, different sounds are presented simultaneously to both ears, with different stimuli presented to each ear. Participants are asked to attend to one ear (the "attended ear") and to ignore the other ear (the "unattended ear"), while listening to the sounds.

After the sounds have been presented, participants are typically asked to recall or identify the sounds presented to the attended ear. The task allows researchers to investigate the mechanisms underlying selective attention in the auditory system and to study factors that influence the selection and processing of auditory information.

More on dichotic listening can be found here: https://brainly.com/question/26815281

#SPJ1

The answer is approximately 1332.75 g of ice can be melted if 24.9 kJ of thermal energy are added at the freezing point.

Thermal energy refers to the energy contained within a system that is responsible for its temperature.

The heat required to melt a substance is equal to the enthalpy of fusion of that substance times its mass. The molar enthalpy of fusion of ice is 333.55 J/mol, so the amount of heat required to melt 1 mol of ice is 333.55 J.

To find the mass of ice that can be melted with 24.9 kJ of thermal energy, we first need to convert the energy from kJ to J:

24.9 kJ = 24.9 x 10^3 J = 24900 J

Next, we divide the amount of thermal energy by the molar enthalpy of fusion of ice to find the number of moles of ice that can be melted:

24900 J / 333.55 J/mol = 74.22 mol

Finally, we multiply the number of moles of ice by its molar mass to find the mass of ice in grams:

74.22 mol x 18.02 g/mol = 1332.75 g

Therefore, The answer is approximately 1332.75 g of ice can be melted if 24.9 kJ of thermal energy are added at the freezing point.

Learn more about thermal energy here: brainly.com/question/934320

#SPJ1

If the temperature is raised while maintaining a constant pressure of 100 atm, CO2 will transition from a solid to a liquid, then from a liquid to a supercritical fluid, and lastly to a gas. This is the fourth of four targets.

Heat energy will logically go from a warmer (body with a high temp) to the a cooler (body with a low temp) according to temperature (one at a lower temperature). How cold or hot something is can be expressed numerically using the physiological concept of temperature. A thermometer is used to determine temperature. Thermometers were calibrated using various temperature scales that historically specified unique reference points & thermometric materials.

It is measured in joules. Heat will therefore serve as a gauge for the flow or movement of energy. You must be aware of the fact that an object will receive or lose heat but not have heat if you want to comprehend the distinction between heat and temperature. It can therefore be referred to as a measure of change. The concepts of temperature and heat are very dissimilar. a thermometer with Farenheit and Celsius scales. The average molecular kinetic energy of a substance is measured by its temperature. The temperature of something is a statement about how quickly the molecules are moving within that object.

Target 1 of 4 is the phase shifts that happen when CO2 is heated from 190 K to 350 K at a constant pressure of 1 atm. It is known as sublimation when CO2 changes its phase at 1 atm from a solid (dry ice) to a gas (carbon dioxide vapor) without going through the liquid phase.

CO2 will experience a separate set of phase shifts when subjected to pressures greater than 1 atm. CO2 will change its state from a solid to a liquid at 5.1 atm constant pressure, and then from a liquid to a gas when the temperature rises. This is the second of four targets.

When the temperature is raised, CO2 will transition from a solid to a liquid at a constant pressure of 10 atm, and then from a liquid to a supercritical fluid. This is the third of four targets.

To know more about Temperature visit:

https://brainly.com/question/12165495

#SPJ4

After adding ethlyene glycol to the dissolved 3-nitrophthalic acid the desired temperature for the reaction stays in room temperature.

Ethylene glycol, also defined as ethane-1,2-diol, the simplest member of the glycol family of organic compounds. Generally a glycol is defined as an alcohol with two hydroxyl groups on adjacent carbon atoms (a 1,2-diol). Basically, the common name ethylene glycol literally means “the glycol derived from ethylene.”

Generally, 3-Nitrophthalic acid is readily used as an intermediate during the synthesis of corrosion inhibitors, medicines and agrochemicals. 3-Nitrophthalic acid is readily available for the preparation of dyes, crop protection agents used during organic synthesis.

During the reactions of both of these chemicals the temperature remains at room temperature.

Learn more about 3-Nitrophthalic acid from the link given below.

https://brainly.com/question/20716309

#SPJ4

Answer:

because it absorbs all colours expect for red,

Explanation: making the red light bounce into your eyes, therefore seeing the colour red

Question 2: The wave transfers its energy to the mineral, I think, thats my best guess

RbF is expected to have the largest difference between the experimental and ideal Van 't Hoff factors. Because RbF has a very high lattice energy due to the small size of the F- ion, making it more difficult for the ions to dissociate in water. Option D is correct.

The Van 't Hoff factor (i) is a measure of the number of particles into which a solute dissociates in a solution. The ideal Van 't Hoff factor (i) is the value expected for a completely dissociated solute, while the experimental Van 't Hoff factor (i) is the value determined by experiments.

For ionic compounds that dissociate in water, the experimental Van 't Hoff factor is often less than the ideal value due to ion pairing or other interactions that reduce the effective number of ions in solution.

The size of the difference between the experimental and ideal Van 't Hoff factors depends on the degree of ion pairing or other interactions in solution. The degree of ion pairing or other interactions in solution is influenced by factors such as the size and charge of the ions, as well as the solvent.

To know more about Van 't Hoff factors here

https://brainly.com/question/1748231

#SPJ4

The percent by mass of the solute (toluene) in the solution is 12.4%.

To calculate the percent by mass of the solute in a solution, you need to divide the mass of the solute by the mass of the entire solution and multiply by 100%.

In this case, the solute is 4.10 g of toluene, and the solvent is 29.0 g of benzene. Therefore, the mass of the entire solution is:

4.10 g (toluene) + 29.0 g (benzene) = 33.1 g

Now we can calculate the percent by mass of the solute:

(4.10 g / 33.1 g) x 100% = 12.4%

Therefore, the percent by mass of the solute (toluene) in the solution is 12.4%.

To know more about solute here

https://brainly.com/question/30620786

#SPJ4

Answer: 21.90 grams HCl  ; 22 g HCl if need correct sig figs

Explanation:

moles = M X L  = 1.5 x .40 =0.60 moles HCl

convert to grams

0.60 X 36.5 = 21.90

A radioactive isotope, such as carbon-14, emits energy as rays and subatomic particles.

Radioactive isotopes, also known as radioisotopes, radionuclides, or radioactive nuclides, are any of several species of the same chemical element with different masses and unstable nuclei that work to dissipate excess energy by spontaneously emitting radiation in alpha, beta, and gamma forms .

More than 1,800 radioactive isotopes of various elements are known. Some of them are found in nature; the rest are produced artificially as direct products of nuclear reactions or indirectly as radioactive derivatives of these products.

There are several sources of radioactive isotopes. Some radioactive isotopes are present as terrestrial radiation. The radioactive isotopes radium, thorium, and uranium, for example, are found naturally in rocks and soil. Uranium and thorium also occur in small amounts in water. Radon, which is produced by the radioactive decay of radium, is abundant in the air.

Other radioactive isotopes are produced by humans in nuclear reactions, which produce unstable combinations of neutrons and protons. One way to artificially induce nuclear transmutation is by bombarding stable isotopes with alpha particles.

Your question is incomplete but most probably your full question was:

Select all that apply. A radioactive isotope (ex. carbon 14) emits energy as which of the

following?

-Rays

-subatomic particles

-Heat

-light

Learn more about Radioactive isotope at

https://brainly.com/question/1907960

#SPJ4

The concentration of the glucose in the resulting solution will contain[tex]33micromoles/L[/tex]

Glucose is a simple sugar molecule composed of 6 carbon atoms, 12 hydrogen atoms, and 6 oxygen atoms. The chemical formula for glucose is C6H12O6. Glucose is a monosaccharide, meaning it is a single-molecule sugar. It is the most important source of energy for living organisms and is found in many foods. Assuming that the initial solution contains 5 millimoles of glucose (5 mmol/L), the resulting solution will contain

[tex]{5 mmol}{150mL} \\= 0.033 mol/L \\= 33 micromoles/L.[/tex]

This can be expressed using the equation:

C1 V1 = C2 V2

Where C1 is the concentration of the original solution (5 mmol/L), V1 is the volume of the original solution (5 mL), C2 is the concentration of the resulting solution (33 micromoles/L) and V2 is the volume of the resulting solution (150 mL).

learn more about Glucose refer:brainly.com/question/28707372

#SPJ4

The Establishment of the Molecular Orbitals of NH3. A molecule's electrical structure can be predicted using the Molecular Orbital Theory (MO).

To learn more about Molecular Orbital Theory, refer to:

https://brainly.com/question/26388921

#SPJ4