Calculate the volume of acetylene produced at 26 degrees Celsius and 0.9 atm from 0.05 CaC2 and excess H2O.

The lewis structure of the SO₃ is as follows :

      : O :

         ||

: O : = S = : O :

The total valence electron in the sulfur trioxide is 24 electrons. The structure of the sulfur trioxide is the trigonal pyramidal, and the double bond is formed and there are no lone pair of the electrons on the central atom the sulfur. The Sulfur trioxide does not have the charge and the oxygen atoms are more electronegative that the sulfur surrenders the electron around, this is because the sulfur is the weak as compared to the oxygen. The lewis structure is as follows :

      : O :

         ||

: O : = S = : O :

To learn more about lewis structure here

https://brainly.com/question/20300458

#SPJ4

The statement (when combining a strong acid with water to dilute it, you should add the acid to the water) is false because adding acid to water can cause the acid to splash and perhaps cause harm.

Always add the acid to the water rather than the water to the acid when diluting a strong acid with water. This is so that the solution won't boil over or spatter when mixing a strong acid with water, which can generate a lot of heat. When acid is added to water, any splattering is contained within the larger volume of water.

The proper way to ensure that the heat is dispersed and the acid is diluted properly is to add the concentrated acid to a big amount of water slowly, cautiously, and while stirring the mixture.

Want to know more about acids visit the link which is given below;

https://brainly.com/question/29796621

#SPJ4

The diameter of Eduarduo,s hair is greater than Orla,s hair by 0.007cm.

A diameter of a circle is any straight line segment that passes through the centre of the circle and has endpoints on the circle in geometry. It is also known as the circle's longest chord. Both definitions apply to the diameter of a sphere.
Given:- The diameter of Orla,s hair strand is 0.005cm.
The diameter of Eduarduo hair strand is 0.012cm.
Clearly, 0.012>0.005cm.
The difference between the diameters= 0.012-0.005=0.007cm.
Thus the diameter of Eduarduo hair is greater than Orla hair by 0.007cm.
To know more about Diameter refer to:-
https://brainly.com/question/390660
#SPJ4

There would be 1.9 * 10^24 molecules

The mole concept is a fundamental idea in chemistry that allows for the conversion of the amount of a substance, usually expressed in grams, to the number of entities it contains, such as atoms, molecules, or ions. The mole provides a way to relate the mass of a substance to the number of entities it contains, which is important in many chemical calculations, such as stoichiometry, where the mole is used to balance chemical equations and calculate the amount of reactants and products involved in a reaction.

We know that;

\Number of moles = Mass/Molar mass

= 142.5 grams /44 g/mol

= 3.2 moles

If 1 mole would have 6.02 * 10^23 molecules

3.2 moles would have 3.2 *  6.02 * 10^23 molecules/1 mole

= 1.9 * 10^24 molecules

Learn more about moles:https://brainly.com/question/26416088

#SPJ1

The mass (in grams) of the salt (NaCl) needed to make the 200 mL of the 0.5 M solution is 5.844g

First, we shall determine the mole of the salt (NaCl). Details below:

Mole = Molarity × volume

Mole of salt (NaCl) = 0.5 × 0.2

Mole of salt (NaCl) = 0.1 mole

Haven obtain the mole of the salt, we shall determine the mass of salt (NaCl) needed to make the solution. This is shown below:

Mass = Mole × molar mass

Mass of salt (NaCl) = 0.1 × 58.44

Mass of salt (NaCl) = 5.844g

Thus, the mass of the salt (NaCl) needed is 5.844g

Learn more about mass:

https://brainly.com/question/18567552

#SPJ1

A greenhouse is filled with air that contains more carbon dioxide that normal air has. The phtosynthesis and plant might growth be affected is can potentially lead to faster plant growth and increased rate of photosynthesis

Plants rely on photosynthesis to create energy, which they use for growth and other cellular functions. Photosynthesis is the process by which plants convert carbon dioxide and water into glucose and oxygen using energy from the sun. When a greenhouse is filled with air that contains more carbon dioxide than normal air, the rate of photosynthesis can increase, leading to faster plant growth.

However, it is important to note that there are other factors that affect plant growth and photosynthesis, such as the availability of water and nutrients, and the intensity and duration of sunlight. If these factors are not optimal, an increase in carbon dioxide alone may not lead to faster plant growth. In conclusion, a greenhouse filled with air that contains more carbon dioxide than normal air can potentially lead to faster plant growth and increased rates of photosynthesis, but other factors such as water, nutrients, and sunlight must also be considered.

Learn more about photosynthesis at:

https://brainly.com/question/29775046

#SPJ11

The concentration of the sulfuric acid solution is 0.252 M.

1. To find the concentration of the HCl solution, we can use the equation M1V1 = M2V2, where M1 and V1 are the molarity and volume of the first solution, and M2 and V2 are the molarity and volume of the second solution.

Rearranging the equation to solve for the concentration of the HCl solution, we get:

M2 = (M1V1)/V2

Plugging in the given values, we get:

M2 = (0.150 M)(18.0 mL)/(25.0 mL) = 0.108 M

Therefore, the concentration of the HCl solution is 0.108 M.

2. To find the concentration of the sulfuric acid solution, we can use the same equation, M1V1 = M2V2. Rearranging the equation to solve for the concentration of the sulfuric acid solution, we get:

M2 = (M1V1)/V2

Plugging in the given values, we get:

M2 = (0.210 M)(12.0 mL)/(10.0 mL) = 0.252 M

Therefore, the concentration of the sulfuric acid solution is 0.252 M.

To learn more about solution refer here:

https://brainly.com/question/30620786#

#SPJ11

Answer:

Strong acid: HCl, HClO4, HNO3, HBr, H2SO4

Strong Base: Ba(OH)2, KOH, Sr(OH)2, LiOH, NaOH, Ca(OH)2

Weak Acid: HF, CH3COOH, H3PO4

Weak Base: NH3

Explanation:

The primary plates move at speeds ranging from under 1 cm/y to over 10 cm/y. The Australian and Nazca Plates are the next fastest plates, moving at rates of above 10 cm/y in some places.

A network of satellites and receiving equipment called the global positioning system (GPS) is used to locate objects on Earth. Certain GPS receivers have a precision of one centimetre, allowing them to pinpoint their location (0.4 inches).

As a result, shifting of the Earth's surface is what causes changes in a GPS station's position. Scientists can identify tectonic plate motion and infer crustal deformation by analyzing the mobility of numerous GPS sites in a region over time.

Thus, One of the slowest plates is the North American one, with average rates ranging from 1 cm/yr in the south to roughly 4 cm/yr in the north.

To learn more about the GPS data, follow the link;

https://brainly.com/question/28903023

#SPJ9

The vapor pressure of the solution if the vapor pressure of water at 25 °C is 23.56 torr is 21.87 torr. The correct option is e. 21.87 torr.

The mass of the NaCl = 50 g

The moles of the NaCl = mass / molar mass

                                     = 50 / 58.44

                                     = 0.855 mol

The mass of the H₂O = 200 g

The moles of the H₂O  = mass / molar mass

                                     = 200 / 18

                                     = 11.11 mol

The total moles = 11.96 mol

The mole fraction of the water = moles of water / total moles

                                                    = 11.11 / 11.96

                                                   = 0.928

The vapor pressures of the solution = mole fraction of water × vapor pressure of water

The vapor pressures of the solution = 0.928 × 23.56

                                                            = 21.87 torr

To learn more about vapor pressure here

https://brainly.com/question/29640321

#SPJ4

When diluting a strong acid with water, it is recommended to add the acid to the water and not the other way around. The statement is true.

This is because adding water to the acid can cause a rapid and exothermic reaction, leading to splattering and potential injury.

When the acid is added to the water, the heat generated is absorbed by the water, reducing the potential for splattering. Additionally, adding the acid to water allows for better mixing and reduces the risk of creating concentrated acid pockets that can be dangerous.

Overall, it is important to follow safe laboratory practices when working with acids and to consult with a trained professional if you are unsure about the proper procedures.

To know more about the dilution, here

brainly.com/question/28392867

#SPJ4

In the reaction 2 HgO —> 2 Hg + O₂, 0.05 moles of O₂ are produced when 0.1 moles of HgO are decomposed.

The balanced chemical equation for the reaction is:

2 HgO —> 2 Hg + O₂

This equation tells us that for every 2 moles of HgO that decompose, 1 mole of O₂ is produced. We can use this relationship to determine how many moles of O2 are produced when 0.1 moles of HgO are decomposed.

To do this, we can use the following equation:

moles of O₂ = (moles of HgO) * (1 mole of O₂ / 2 moles of HgO)

Plugging in the given value of 0.1 moles of HgO, we get:

moles of O₂ = (0.1 moles of HgO) * (1 mole of O₂  / 2 moles of HgO)

Simplifying the equation, we get:

moles of O₂ = 0.05 moles of O₂

Therefore, 0.05 moles of O₂  are produced when 0.1 moles of HgO are decomposed.

Learn more about chemical equations here brainly.com/question/27287858

#SPJ11

In a spectrophotometer, both absorbance and transmittance indicate the amount of light passing through a sample. A high absorbance corresponds to a low transmittance.

Absorbance and transmittance are light-sample interactions measured by spectrophotometers. Absorbance and transmittance are inversely connected and can quantify how much light a sample absorbs at a specific wavelength.

"A" represents a sample's light absorption, which is proportional to its absorbing material concentration. A beam of light is sent through the sample to measure absorbance. Concentration increases light absorption and absorbance.

Transmittance (T) measures how much light travels through a sample without being absorbed. Transmittance is the ratio of light that goes through the sample to light that hits it. Transmittance increases as light absorption decreases.

In summary, absorbance and transmittance measure light's interaction with a sample and estimate the concentration of an absorbing substance.

The complete question is;

In a spectrophotometer, both absorbance and transmittance indicate _______Passing through a sample. A high absorbance corresponds to a _______Transmittance.

Want to know more about spectrophotometers visit the link which is given below;

https://brainly.com/question/24195565

#SPJ4

In other words, the mass as well as charge across both sides of the reactions are balanced. Therefore, the balanced equation is CaCO[tex]_3[/tex]→ CaO + CO[tex]_2[/tex].

A balanced equation is indeed a chemical reaction equation in which the overall charge and the amount of atoms for every element inside the reaction are the same for both the products and the reactants.

In other words, the mass as well as charge across both sides of the reactions are balanced.

CaCO[tex]_3[/tex]→ CaO + CO[tex]_2[/tex]

The atom oc Ca on reactant and product side is 1.

The atom of oxygen on reactant and product side is 3

The atom of carbon on reactant and product side is 1

Therefore, the balanced equation is CaCO[tex]_3[/tex]→ CaO + CO[tex]_2[/tex].

To learn more about balanced equation, here:

https://brainly.com/question/29109946

#SPJ9

Pentane has a low boiling point because it is a relatively small and nonpolar molecule. The temperatur where used start Pentane boiling  

30.1 °C

Boiling point is determined by the strength of intermolecular forces between molecules, and nonpolar molecules like pentane have weak intermolecular forces. The only intermolecular force present in pentane is London dispersion force, which arises due to temporary fluctuations in electron density within the molecule.

Since London dispersion force is weak, it requires less energy to overcome the intermolecular forces and separate the molecules from one another, which means that pentane will boil at a relatively low temperature compared to larger and more polar molecules with stronger intermolecular forces. the boiling point of a liquid is determined by the temperature at which its vapor pressure equals the atmospheric pressure. At lower pressures, liquids boil at lower temperatures, while at higher pressures, they boil at higher temperatures.

In the case of pentane, its weak intermolecular forces result in a low surface tension, which makes it easier for the molecules to escape from the surface and enter the gas phase. This leads to a higher vapor pressure at a given temperature compared to larger and more polar molecules. As a result, pentane will boil at a lower temperature than those larger and more polar molecules, which require more energy to overcome stronger intermolecular forces and enter the gas phase.

That there are different isomers of pentane, including n-pentane, iso-pentane, and neo-pentane, and their boiling points can differ slightly due to differences in their molecular structures. However, in general, pentane is known for having a low boiling point, which makes it useful in many industrial applications such as as a solvent or a component in fuel blends.

To learn more about  boiling point :

https://brainly.com/question/2153588

#SPJ4

Organometallic reagents are good nucleophiles and strong bases, and contain a polar carbon-metal bond.

Organometallic compounds are molecules that contain at least one covalent bond between a carbon atom and a metal atom. The metal in these compounds is typically an element from the groups 1 to 3, 11 to 13, or 15 to 17 of the periodic table, and the carbon is typically sp-, sp2-, or sp3-hybridized.

Therefore, the following two statements are correct:

Organometallic reagents are good nucleophiles and strong bases.

These reagents contain a polar carbon-metal bond.

The other two statements are not correct:

Organometallic reagents are not ionic since they typically contain a bond between a metal and a carbon, which is a nonmetal.

Organometallic reagents are not a source of electrophilic carbon, but rather a source of nucleophilic carbon.

To learn more about Organometallic reagents :

https://brainly.com/question/29980092

#SPJ4

A cup of coffee can have up to 0.250 grams of caffeine,C8H10N4O2. 0.007 x 10²³ molecules of caffeine would be in the coffee.

The term mole is defined as the amount of substance of a system which contains as many elementary entities.

1 mole is equal to 6.023 × 10 ²³ molecules.

Given mass of caffeine, C8H10N4O2 is 0.250 g

Molar mass of C8H10N4O2 is 194 g/mol

So number of moles of C8H10N4O2 is , n = mass/molar mass

= 0.250/(194 g/mol)

= 0.0012 mol

We know that 1 mole of any compound contains Avogadro number (6.023x10²³) molecules

Therefore, 1 mole of caffeine contains 6.023x1023 molecules

0.0012 mol of caffeine contains M molecules

M = 0.0012 mol x 6.023x10²³ molecules

= 0.007 x 10²³ molecules

Thus, 0.007 x 10²³ molecules of caffeine would be in the coffee.

To learn more about the mole, follow the link;

https://brainly.com/question/26416088

#SPJ9

Answer: Condensation

Explanation:

When particles go from a gas to a liquid, it is called condensation.

On a hot summer day, you see this happening when a cold glass of ice tea forms water on the outside of the glass. Humidity in the air comes in contact with the cold glass of tea and water droplets form on the glass.

10mL of water in SX at 0.00003 g/cm3 The average density value in g/cm3 is 0.9982 and was calibrated at 15°C, 20°C, and 25°C.

Two teaspoons are equal to 10 mL. (2tsp). Three teaspoons make to one tablespoon, which is three times larger than a teaspoon (1Tbsp or 1Tb). 15 mL is also equal to one tablespoon.

The result is calculated by multiplying the entered milligramme by 0.001, since 1 milligramme is equal to 0.001 millilitres. When there are 15 milligrammes, for instance, 15 x 0.001 is 0.015 mL in the conversion of milligrammes to milliLitres.

To know more about density  visit:-

https://brainly.com/question/29775886

#SPJ1

What are atomic orbital?

An atomic orbital is a function that describes the position and wave-like activity of an electron in an atom in terms of both atomic theory and quantum mechanics. This function can be used to determine the likelihood of discovering any atom's electron in any particular area surrounding the nucleus. The physical area or space where the electron may be calculated to be present, as predicted by the specific mathematical shape of the orbital, is sometimes referred to as an atomic orbital.

To learn more about atomic orbital visit;

https://brainly.com/question/28240666

#SPJ4

From the balanced equation, it is clear that, one mole or 28 g of lithium oxide is reacting with one mole or 18 g of water. Then, 250 g of lithium oxide will remove 160.71 g of water.

The balanced chemical equation of a reaction represents the perfect stoichiometric proportions of all the reactants and products in the reaction. The mole ratio of each reactants and the theoretical yield of the product can be determined from the balanced equation.

From the given equation, it is clear that, one mole of lithium oxide reacts completely with one mole of water.

molar mass of  lithium oxide = 28 g/mol

molar mass of water = 18 g/mol

Hence, 28 g of lithium oxide reacts  18 g of water. Then , 250 g of lithium oxide requires:

(250 × 18)/28 = 160.7 g of water.

Therefore, 160.7 g of water is removed by 250 g of lithium oxide.

Find more on balanced reactions:

https://brainly.com/question/29710763

#SPJ1

Benzoic acid is a weak acid that has a low solubility in water due to its polarity and its tendency to form hydrogen bonds with other water molecules.

What is solubility?

Solubility is the ability of a substance (the solute) to dissolve in a solvent to form a homogeneous mixture (the solution). The solubility of a substance depends on a variety of factors, including the chemical properties of the solute and solvent, temperature, and pressure.

The carboxylic acid group in benzoic acid is a polar functional group that is attracted to water molecules, but the hydrocarbon chain in benzoic acid is nonpolar and is not attracted to water molecules. As a result, the solubility of benzoic acid in water is limited.

However, when benzoic acid is dissolved in a basic solution, it forms the water-soluble benzoate anion (C6H5COO-), which has a higher solubility in water due to its increased polarity. This occurs because the benzoic acid reacts with the hydroxide ions in the basic solution to form the benzoate anion:

C6H5COOH + OH- → C6H5COO- + H2O

The benzoate anion is negatively charged and is attracted to the positively charged ends of water molecules, increasing its solubility in water.

In summary, benzoic acid is less soluble in water due to its low polarity and the nonpolar hydrocarbon chain, but it becomes more soluble in basic solution as it is converted to the more polar benzoate anion.

To learn more about solubility:

https://brainly.com/question/23946616

#SPJ4

The J-value Proton B possesses to be A. 3.0 Hz that is explained in the below section.

The J value is described because the elastic capacity distinction among the linear and nonlinear elastic our bodies with the identical geometric variable. The J value of a quartet can usually be decided via way of means of measuring the distances among man or woman lines. With actual data, it's miles fine to take the common distance among lines (which is likewise the space among the primary and closing line divided via way of means of three). Example: t, J = 6 Hz (DRAW A SPLITTING TREE AND GRAPH THE MULTIPLET. The coupling constant, J (typically in frequency units, Hz) is a degree of the interplay among a couple of protons.

Thus, option A is the correct choice.

To learn more about coupling constant check the link below:

https://brainly.com/question/15728133

#SPJ4

The highest ionization energy can be determined by looking at the periodic table and finding the element with the highest atomic number. This element will have the highest ionization energy as it requires the most energy to remove an electron from its outermost shell.

Ionization energy is the energy required to remove an electron from an atom or ion. The amount of ionization energy is dependent on the atomic structure of the element. The more electrons an atom has, the more energy is required to remove one. Therefore, as the atomic number increases, so does the ionization energy.

To know more about the Ionization Energy, here

brainly.com/question/28385102

#SPJ4

There are 490 gallons of a  ​70 ​% antifreeze solution must be mixed with gallons of ​% antifreeze to get a mixture that is 30 ​% ​antifreeze.

An equation can be created using the relationship between each antifreeze proportion.

The required amount of 90% antifreeze is 490 gallons.

The query is unfinished. I will thus address the query using the following information.

Antifreeze available = 70 gallons at 10%

Gallons of 90% antifreeze equal x.

Total = x + 70 to obtain an 80% solution after combining the solution.

The formula is therefore written as follows: 

(x+70) x 80% = 70x 10% + x 90%

assemble similar terms

0.9x +0.8x = 56-7

0.1 x= 49

Divide by 0.1 and get 490.

Your question is incomplete but most probably your full question was

How many gallons of a ​70% antifreeze solution must be mixed with gallons of 90​% antifreeze to get a mixture that is 30​% ​antifreeze? Use the​ six-step method.

Read more about equations at:

brainly.com/question/2264804

#SPJ4

Reactant term is used to describe the substance that is totally consumed in a chemical reaction.

What are reactants?

Reactants are the substances that enter into and are used up in a chemical reaction. They are the starting materials that come together to form the products of the reaction. Reactants are found on the left side of the equation for a chemical reaction, and the products are found on the right side. Reactants are often referred to as substrates, as they are the substances from which the reaction builds the products. All chemical reactions involve the combining of at least two reactants, usually in the presence of a catalyst. Understanding the reactants involved in a reaction is essential to understanding the reaction itself.

Therefore, Reactant term is used to describe the substance that is totally consumed in a chemical reaction.

To learn more about Reactant

Here: https://brainly.com/question/28732327

#SPJ4

The volume that is occupied is 22.4 L

The mole allows for the conversion of the mass of a substance to the number of entities it contains, and vice versa, through the use of its molar mass, which is the mass of one mole of the substance. The mole is a convenient unit for expressing amounts of substances in chemical reactions, as it provides a way to relate the mass of a substance to its number of entities, such as atoms or molecules.

If one mole of oxygen contain 6.02 * 10^23 moles

x moles would contain 6.70 x 10^22 molecules

x = 1 mole

Then the volume that is occupies is 22.4 L

Learn more about moles:https://brainly.com/question/26416088

#SPJ1

Gas molecules are assumed to be in constant random motion and to collide perfectly elastically with one another in this theory. They bounce off one another. These particles are assumed to be spherical. There are also no interactions between the molecules.

According to kinetic molecular theory, gas particles are in constant motion and have perfectly elastic collisions. Both Charles' and Boyle's laws can be explained using kinetic molecular theory. The average kinetic energy of a gas particle collection is only proportional to absolute temperature.

Collisions are perfectly elastic; when two molecules collide, their kinetic energies and directions change, but the total kinetic energy remains constant. Collisions do not have a "sticky" effect. The absolute temperature is directly proportional to the average kinetic energy of the gas molecules.

Thus,The two molecules will stay together because they are attracted to each other.

To learn more about the kinetic molecular theory, follow the link;

https://brainly.com/question/17121882

#SPJ9

The final Lewis structure for HBr is:

    :Br:
  ..  ..
H -     :
  ..  ..

The Lewis structure for HBr is as follows:

H - Br

In this structure, the hydrogen atom (H) and the bromine atom (Br) are bonded together by a single covalent bond. This is represented by the dash (-) between the two atoms. The Lewis structure shows the arrangement of the valence electrons around the atoms in a molecule.

To draw the Lewis structure for HBr, we first need to determine the number of valence electrons for each atom. Hydrogen has 1 valence electron and bromine has 7 valence electrons.

Next, we need to arrange the atoms and connect them with a single bond. The hydrogen atom is placed on one side of the bromine atom and a single bond is drawn between them.

Finally, we need to complete the octets for the atoms by adding lone pairs of electrons around the bromine atom. Bromine needs 7 more electrons to complete its octet, so we add 3 lone pairs of electrons around it.

To learn more about Lewis structure refer here:

https://brainly.com/question/20300458#

#SPJ11

The directing effect of the amide group in salicylamide is meta, which will predominantly lead to iodination products at the meta position relative to the amide group.

Salicylamide is an aromatic amide with the molecular formula C7H7NO2. It contains a benzene ring and an amide functional group (-CONH2) attached to it.

Substituents can have directing effects on the ring during electrophilic aromatic substitution reactions. There are two main types of directing effects:

Ortho-para directing: Substituents that are ortho-para directing enhance electrophilic attack at the ortho and para positions (positions 2 and 4) relative to the substituent.

Meta directing: Substituents that are meta directing enhance electrophilic attack at the meta position (position 3) relative to the substituent.

In the case of salicylamide, the amide group is a meta-director due to the electron-withdrawing effect of the carbonyl group. Therefore, the iodination products of salicylamide will predominantly occur at the meta position.

Learn more about salicylamide here

brainly.com/question/30841474

#SPJ4