The given relationship is a function, as of the given condition it consists of 3 sub-functions,
Functions are the relationship between sets of values. e g y=f(x), for every value of x there is its exists in a set of y. x is the independent variable while Y is the dependent variable.
here,
Let's assume that, 3-time intervals
1 . 0 to 5
2. 5 to 7
3. 7 to 10
So for intervals, we have 3 different equation of functions which represents the distance traveled by Camilla in time t.
Thus, the given relationship is a function, as of the given condition it consists of 3 sub-functions.
When she increased her pace, she principally made up for lost time standing at the position. assuming that she made it in the same quantum of time if she did not stop, you can assume that she didn't waste presently time because she picked up the pace.
Learn more about Functions:
https://brainly.com/question/21145944
#SPJ4
-9(6j+17-2f) for f = -10 and j=-2
Answer:
-225
Step-by-step explanation:
f = -10 and j= -2
-9(6(-2) +17 -2(-10) )
-9(-12 + 17 + 20)
-9(25)
-225
Two buckets, each with a different volume of water, start leaking water at the same time, but at different rates. Assume the volumes are changing linearly.
Bucket volume (mL)
Times: min Bucket A. Bucket B.
1 min 2,900 2,725
10 min 2,000 2,050
What was the difference, in milliliters, of their starting volumes? Do not include units in your answer.
The difference in starting Volume is 175 and after 8 minutes both buckets have same volume.
What is Rate of Change?The momentum of a variable is represented by the rate of change, which is used to mathematically express the percentage change in value over a specified period of time.
Given:
The leakage rate of A
= (2000- 2900)/ (1- 10)
= -900/ (9)
= -100 ml/min
The leakage rate of B
= (2050- 2725)/ (1- 10)
= -675/ (9)
= -75 ml/min
Now, 2900- 100t = 2725 - 75t
25t = 175
t= 7
So, when t= 1 min and after 7 min both buckets have the same volume of water.
So, t= 1+ 7 = 8 mins
Learn more about Rate of Change here:
https://brainly.com/question/29518179
#SPJ1
Obtain an initial basic feasible solution to the following transportation problem
using Vogel’s approximation method.
D1
D2
D3
D4
A
5
1
3
3
34
B
3
3
5
4
15
C
6
4
4
3
12
D
4
-1
4
2
19
21
25
17
17
80
Vogel's approximation method is used to find an initial feasible solution to a transportation problem.
The method is based on the observation that if there is a row or a column in the transportation tableau having the same minimum positive difference (or penalty) between the costs of two cells, it is likely that one of these cells will get a positive allocation in the optimal solution.
How to find an initial solution using Vogel's approximation methodCalculate the penalty for each cell by subtracting the smaller of the two adjacent cells from the larger.
D1 D2 D3 D4 A B C D
5 1 3 3 34 3 6 4
Penalty 0 2 0 1 31 2 2 -1
3 3 5 4 15 3 4 -1
Penalty 0 0 2 1 12 2 2 2
6 4 4 3 12 4 3 2
Penalty 2 1 1 0 6 1 0 1
4 -1 4 2 19 2 3 2
Penalty 5 5 2 0 17 2 0 0
Identify the row and column having the maximum penalty. In this case, the maximum penalty is 5 in row 1 and column 4.
Allocate as much as possible to the cell in the intersection of the row and column with the maximum penalty. The allocation should not exceed the demand or the supply of that row or column.
D1 D2 D3 D4 A B C D
5 1 3 2 34 3 6 4
Penalty 0 2 0 1 31 2 2 -1
3 3 5 3 15 3 4 -1
Penalty 0 0 2 1 12 2 2 2
6 4 4 3 12 4 3 2
Penalty 2 1 1 0 6 1 0 1
4 -1 4 2 19 2 3 2
Penalty 5 5 2 0 17 2 0 0
Repeat the process until all demands are met or all supplies are exhausted.
D1 D2 D3 D4 A B C D
5 1 2 2 34 3 6 3
Penalty 0 2 0 0 32 2 2 -1
3 3 5 3 15 3 3 0
Penalty 0 0 2 0 12 2 1 2
6 4 4 3 12 4 0 1
Penalty 2 1 1 0 6 1 0 0
4 -1 4 2 19 2 3 1
Penalty 5 5 2 0 17 2 0 0
The above table shows an initial feasible solution to the transportation problem using Vogel's approximation method. The total cost of this solution is 34 + 15 + 12 + 19 = 80, which is the same
Read more about Vogel’s approximation method here:
https://brainly.com/question/15186345
#SPJ1
Suppose that the sequence {an} converges to a and that d is a limit point of the sequence {bn}. prove that ad is a limit point of the sequence {anbn}.
After considering that the sequence {an} converges to a and that d is a limit point of the sequence {bn}, 'ad' is a limit point of the sequence {anbn}.
To prove this, we can use the fact that for any ε > 0, there exist N and M such that |an - a| < ε/|d| for n ≥ N and |bn - d| < ε/|a| for m ≥ M. Then, we have:
|anbn - ad| = |anbn - and + and - ad| ≤ |an||bn - d| + |d||an - a|Using the bounds we obtained for |an - a| and |bn - d|, we can simplify this inequality to:
|anbn - ad| ≤ ε + |d|ε/|a| for n ≥ N and m ≥ M
This shows that for any ε > 0, there exists an index k such that |anbn - ad| < ε for k ≥ max(N, M), which means that ad is a limit point of the sequence {anbn}.
Learn more about Limits:
https://brainly.com/question/27129946
#SPJ4
A college finds that 10% of students have taken a distance learning class and that 40% of students are part time students. Of the part time students, 20% have taken a distance learning class. Let D = event that a student takes a distance learning class and E = event that a student is a part time student
a. Find P(D AND E).
b. Find P(E|D).
c. Find P(D OR E).
d. Using an appropriate test, show whether D and E are independent.
e. Using an appropriate test, show whether D and E are mutually exclusive.
A college finds that 10% of students have taken a distance learning class and that 40% of students are part time students.
a. P(D AND E).= 0.08
b. Find P(E|D).= 0.8
c. Find P(D OR E). = 0.42
A) P (D and E) = 0.4 x 0.2 = 0.08
explanation: 20% of the part times students are taking distance learning classes (D and E)
B) P (E | D) = P ( D and E) / P (D) = 0.08 / 0.1 = 0.8
C) P (D or E) = 0.4 + 0.1 - 0.08 = 0.42
D and E are not independent, because P (D and E) doesn't equal P(D) x P(E)
D and E are not mutually exclusive
Probability refers to potential. A random event's occurrence is the subject of this area of mathematics. The range of the value is 0 to 1. Mathematics has incorporated probability to forecast the likelihood of various events. The degree to which something is likely to happen is basically what probability means. You will understand the potential outcomes for a random experiment using this fundamental theory of probability, which is also applied to the probability distribution.
Learn more about Probability;
https://brainly.com/question/30373962
#SPJ4
Explain whether each scenario is a classification or regression problem, and indicate whether we are most interested in inference or prediction. Finally, provide sample size (n) and the number of predictors (p).
(a) We collect a set of data on the top 500 firms in the US. For each firm we record profit, number of employees, industry and the CEO salary. We are interested in understanding which factors affect CEO salary.
(b) We are considering launching a new product and wish to know whether it will be a success or a failure. We collect data on 20 similar products that were previously launched. For each product we have recorded whether it was a success or failure, price charged for the product, marketing budget, competition price, and ten other variables.
(c) We are interested in predicting the % change in the USD/Euro exchange rate in relation to the weekly changes in the world stock markets. Hence we collect weekly data for all of 2012. For each week we record the % change in the USD/Euro, the % change in the US market, the % change in the British market, and the % change in the German market.
(a) A regression problem because CEO salary is a continuous variable.
(b) A classification problem because the response variable is categorical (success or failure)
(c) A regression problem because the response variable is continuous
(a) This scenario involves collecting data on the top 500 firms in the US and recording profit, number of employees, industry, and CEO's salary. The research question is understanding which factors affect CEO salary. The sample size is 500, and the number of predictors is three (profit, number of employees, and industry) plus the response variable (CEO salary).
(b) The second scenario involves launching a new product and determining whether it will be a success or failure. Data is collected on 20 similar products, including whether they were successful or not, price, marketing budget, competition price, and ten other variables. The sample size is 20, and the number of predictors is 13 (price, marketing budget, competition price, and ten other variables).
(c) The third scenario involves predicting the % change in the USD/Euro exchange rate in relation to the weekly changes in the world stock markets. Data is collected weekly for all of 2012, including % change in the USD/Euro, % change in the US market, % change in the British market, and % change in the German market. The sample size is 52 (number of weeks in a year), and the number of predictors is three (changes in the US, British, and German markets) plus the response variable (% change in the USD/Euro).
To know more about regression here.
https://brainly.com/question/14184702
#SPJ4
80 POINTS!!! PLEASE HELP
Use the table and the data provided to analyze the following data.
During gym class, the pulse rate was recorded for 19 students before and after an exercise warm-up. The pulse rates are listed below.
(View file attached)
Part A: Create a stem-and-leaf plot for each set of data. Justify your reasoning for split or non-split stems. (10 points)
Part B: Compare and contrast the two data sets. Justify your answer using key features of the data (shape, outliers, center, and spread). (10 points)
Part C: Did exercise appear to have changed the pulse rates for the students? Justify your answer using your comparisons from part B. (10 points)
Step-by-step explanation: A stem and leaf plot is a way to plot data where the data is split into stems (the largest digit) and leaves (the smallest digits). They were widely used before the advent of the personal computer, as they were a fast way to sketch data distributions by hand.
A fishing boat in the ocean is moving at a speed of 20.0 km/h and heading in a direction of 40.0° east of north. A lighthouse spots the fishing boat at a distance of 24.0 km from the lighthouse and in a direction of 15.0° east of north. At the moment the fishing boat is spotted, a speedboat launches from a dock adjacent to the lighthouse. The speedboat travels at a speed of 44.0 km/h and heads in a straight line such that it will intercept the fishing boat.
(a)How much time, in minutes, does the speedboat take to travel from the dock to the point where it intercepts the fishing boat?
(b)In what direction does the speedboat travel? Express the direction as a compass bearing with respect to due north.
° east of north
a).north component = 44.0 km/h * sin(40.0°) ≈ 28.31 km/h
East component = 44.0 km/h * cos(40.0°) ≈ 33.71 km/h
The difference between the northern components of the fishing boat and the speedboat is:
North difference = 28.31 km/h - 0 km/h = 28.31 km/h
So the time it takes for the speedboat to intercept the fishing boat is:
Time = North distance / North difference = 6.21 km / (28.31 km/h) = 0.219 hours
Converting to minutes:
Time = 0.219 hours * 60 minutes/hour ≈ 13.1 minutes
Therefore, it takes the speedboat about 13.1 minutes to intercept the fishing boat.
b) tan θ = east component / north component
θ = tan⁻¹(east component / north component)
θ ≈ 51.3°
So the direction in which the speedboat travels is 51.3° east of north. Therefore, the compass bearing with respect to due north is:
Bearing = 90° - 51.3° ≈ 38.7° east of north.
Describe Function.In mathematics, a function is a relationship between two sets of values, such that each input value (also known as the argument or independent variable) is associated with exactly one output value (also known as the value or dependent variable). A function is usually denoted by a symbol such as "f(x)" or "y" and is defined by a rule or formula that specifies how the input value is transformed into an output value.
For example, consider the function f(x) = 2x. This function takes an input value x, multiplies it by 2, and returns the result as the output value. So, for example, when x is 3, the output value is 6. When x is 5, the output value is 10.
Functions can be represented graphically as well. The graph of a function is a set of points in a two-dimensional coordinate system, where the x-coordinate is the input value and the y-coordinate is the output value. For example, the graph of the function f(x) = x^2 is a parabola.
Functions are widely used in many areas of mathematics, science, engineering, economics, and more. They provide a powerful tool for modeling real-world situations, making predictions, and analyzing data.
(a) To find how much time it takes for the speedboat to intercept the fishing boat, we first need to find the position of the fishing boat at the moment the speedboat launches.
From the lighthouse's perspective, the fishing boat is located at a bearing of 15.0° east of north and a distance of 24.0 km. Using trigonometry, we can find the north and east components of the fishing boat's position:
North component = 24.0 km * sin(15.0°) ≈ 6.21 km
East component = 24.0 km * cos(15.0°) ≈ 22.76 km
Now we can use the relative velocity between the fishing boat and the speedboat to find the time it takes for the speedboat to intercept the fishing boat. The speedboat's velocity can be broken down into north and east components:
North component = 44.0 km/h * sin(40.0°) ≈ 28.31 km/h
East component = 44.0 km/h * cos(40.0°) ≈ 33.71 km/h
The difference between the northern components of the fishing boat and the speedboat is:
North difference = 28.31 km/h - 0 km/h = 28.31 km/h
So the time it takes for the speedboat to intercept the fishing boat is:
Time = North distance / North difference = 6.21 km / (28.31 km/h) = 0.219 hours
Converting to minutes:
Time = 0.219 hours * 60 minutes/hour ≈ 13.1 minutes
Therefore, it takes the speedboat about 13.1 minutes to intercept the fishing boat.
(b) To find the direction in which the speedboat travels, we can use trigonometry to find the angle between the speedboat's velocity vector and the north direction.
The north component of the speedboat's velocity is 28.31 km/h, and the east component is 33.71 km/h. Using the tangent function, we can find the angle:
tan θ = east component / north component
θ = tan⁻¹(east component / north component)
θ ≈ 51.3°
So the direction in which the speedboat travels is 51.3° east of north. Therefore, the compass bearing with respect to due north is:
Bearing = 90° - 51.3° ≈ 38.7° east of north.
To know more about trigonometry visit:
brainly.com/question/12068045
#SPJ1
I NEED HELP ASAP
For a physics experiment, the class drops a golf ball off a bridge toward the pavement below. The bridge is 75 feet high. The function h = - 16t² + 75 gives the golf ball's height h above the pavement (in feet) after t seconds. Use the graph of the function on the right. After seconds does the golfball hit the pavement
Answer:
2.17 seconds
Step-by-step explanation:
Answer:
To find out when the golf ball hits the pavement (when the height is 0 feet), we can set h = 0 in the equation h = -16t^2 + 75 and solve for t:
0 = -16t^2 + 75
16t^2 = 75
t^2 = 75/16
t = sqrt(75/16)
The square root of (75/16) is approximately 1.861 seconds, so the golf ball hits the pavement after approximately 1.861 seconds.
Researchers conducted a naturalistic study of children between the ages of 5 and 7 years. The researchers visited classrooms during class party celebrations. As a measure of hyperactivity, they recorded the number of times children left their seats. The researchers found a strong positive correlation between sugary snacks offered at the parties and hyperactivity. Based on these findings, the researchers concluded that sugar causes hyperactivity a. Explain why people may easily accept the conclusion of the study described above? Include in your explanation a misunderstanding of correlational studies b. As a follow-up study, the researchers are designing an experiment to test whether sugar causes hyperactivity. For the experiment, please do the following. 2 o State a possible hypothesis. wg on Operationally define the independent and dependent variables. 0" h o vo Describe how random assignment can be achieved, and why it is important for experiments we aus dren to e
The people may easily accept the conclusion of the study described because of a common misunderstanding of correlational studies.
The Correlational Studies are used to examine the relationship between two variables, and a positive correlation suggests that the two variables are related in a certain way .
In this study, the Researchers found a strong positive correlation between sugary snacks and hyperactivity, suggesting that as the amount of sugary snacks offered increased, the number of times children left their seats also increased.
Therefore , people easily accept the conclusion of the study that sugar causes hyperactivity due to a misunderstanding of correlational studies and a lack of knowledge about the need for experimental designs to establish causality.
Learn more about Hyperactivity here
https://brainly.com/question/14596477
#SPJ4
The given question is incomplete , the complete question is
Researchers conducted a naturalistic study of children between the ages of 5 and 7 years. The researchers visited classrooms during class party celebrations. As a measure of hyperactivity, they recorded the number of times children left their seats. The researchers found a strong positive correlation between sugary snacks offered at the parties and hyperactivity.
Based on these findings, the researchers concluded that sugar causes hyperactivity.
Explain why people may easily accept the conclusion of the study described above? Include in your explanation a misunderstanding of correlational studies
FLUENCY
A function is a rule that for every input it assigns
(1) exactly one output
(2) at least one output
(3) two or more outputs
(4) an infinite number of outputs
A function is a rule that for every input it assigns exactly one output. The Option 1 is correct.
What does a function mean?A function is a rule that assigns each input exactly one output. We call the output the image of the input. The set of all inputs for a function is called the domain. The set of all allowable outputs is called the codomain.
To be able to define the function, we must describe the rule. This is often done by giving a formula to compute the output for any input (although this is certainly not the only way to describe the rule). The key thing that makes rule actually a function is there is exactly one output for each input. That is, it is important that the rule be a good rule.
Read more about function
brainly.com/question/10439235
#SPJ1
Darrel receives a weekly salary of $430. In addition, $19 is paid for every item sold in excess of 100 items.
How much will Darrel earn for the week if he sold 225 items?
I
Darrel's total earning for the week he sold 225 items is $2,805.
How much will Darrel earn for the week if he sold 225 items?We are given that Darrel has a weekly salary of $430.
This means that no matter how many items he sells, he will always earn at least $430 for the week.
However, Darrel also earns an additional $19 for every item he sells in excess of 100 items.
This means that for the first 100 items he sells, he will not earn any additional money beyond his $430 weekly salary.
But for every item he sells beyond 100, he will earn an additional $19.
Now, for selling 225 items, Darrel sold 125 items in excess of the 100 item baseline.
Thus, the additional amount he earned from selling 125 items is:
= 125 items × $19 per item
= $2,375
Therefore, his total earnings for the week would be:
$430 (weekly salary) + $2,375 (amount earned from selling items in excess of 100)
= $2,805
Learn to solve more problems involving arithmetic operations here: https://brainly.com/question/24113906
#SPJ1
A circle that has its center at the origin passing through point where coordinates are (-1, -1)The area of the circle is? 
The area of the circle in discuss as required to be determined is; 44/7.
What is the area of the circle as described?It follows that the radius of a circle is the distance between its center and any point on the circumference.
In this case, center, = (0, 0) and point in circumference= (-1, -1).
Therefore, the radius is;
r = √( (-1 -0)² + (-1-0)² )
r = √2.
Consequently, since area of a circle is given by;
Area = πr²
A = (22/7) × (√2)²
A = 44/7.
Ultimately, the area of the circle is; 44 / 7.
Read more on area of a circle;
https://brainly.com/question/12269818
#SPJ1
What variable do I solve for first? Do I solve for X because it’s first in the alphabet? If so, which X variable do I solve for? Do I solve for the smallest or biggest? I added a photo of the one i’m struggling with! :))
Answer:
No solution
Step-by-step explanation:
Given the simultaenous equations:
[tex]\displaystyle{\begin{cases} 3.25x - 1.5y = 1.25 \\ 13x-6y=10 \end{cases}}[/tex]
The first equation can be rewritten as:
[tex]\displaystyle{\dfrac{325}{100} x - \dfrac{15}{10}y = \dfrac{125}{100}}[/tex]
Clear the denominators by multiplying both sides with 100:
[tex]\displaystyle{\dfrac{325}{100} x \cdot 100 - \dfrac{15}{10}y \cdot 100= \dfrac{125}{100} \cdot 100}\\\\\displaystyle{325x - 150y = 125}[/tex]
The whole terms are multiple of 25, so we can simplify even lower by dividing both sides by 25:
[tex]\displaystyle{\dfrac{325x}{25} - \dfrac{150y}{25} = \dfrac{125}{25}}\\\\\displaystyle{13x-6y=5}[/tex]
So now, we have:
[tex]\displaystyle{\begin{cases}13x-6y=5\\ 13x-6y=10 \end{cases}}[/tex]
There are various ways to solve simultaenous equations but I'll use the elimination method. Multiply negative in either first or second equation but I'll choose first:
[tex]\displaystyle{\begin{cases}-13x+6y=-5\\ 13x-6y=10 \end{cases}}[/tex]
Add both equations with like terms:
[tex]\displaystyle{0=5}[/tex]
Since this equation is false. Therefore, there is no solution to the simultaenous equation.
Answer:
first you look at what you have, then develop a strategythis system has No SolutionStep-by-step explanation:
You want to know what to do first with the system of equations ...
3.25x -1.5y = 1.2513x -6y = 10StrategiesYou are taught a couple of strategies for solving systems of linear equations algebraically. The "substitution" strategy requires you use one of the equations to write an expression that can be substituted into the other equation. The purpose of this is to reduce the number of variables in the remaining equation. Usually, that means solving for one of the variables to obtain the expression to substitute.
Another strategy you are taught is the "elimination" strategy. It is also called the "addition" or "combination" strategy. It is executed by adding (or subtracting) some multiple of one of the equations from the other equation, or some multiple of it. The purpose of this is to make the coefficient of one of the variables be zero in the combined equation.
LookSubstitutionThe substitution strategy is easiest to execute if you already have one or both equations in "y=" or "x=" form. It is nearly as easy to execute if the coefficient of one of the variables is +1 or -1, or if that can be easily made to be the case. So, this is what you look for to see if the substitution strategy is an appropriate choice.
EliminationThe elimination strategy is easiest to execute if the coefficients of one of the variables are the same or opposites. If they are the same, that variable can be eliminated by subtracting one equation from the other. If they are opposites, the variable can be eliminated by adding one equation to the other. So, this relation between coefficients is one of the next things you look for when deciding what your strategy will be.
The elimination strategy can also be effectively used if the coefficients of one of the variables are a nice (integer) multiple of one another. In this problem, we notice that the coefficients of y are -1.5 and -6, which are related by a factor of 4. (It is helpful to be very familiar with multiplication facts.) As it happens, the coefficients of x have the same relation: 13 is 4 times 3.25.
Dependent/InconsistentThe fact that both sets of coefficients are related by the same factor raises a red flag regarding these equations. It means they are either dependent (have infinite solutions) or are inconsistent (have no solution).
The equations are dependent if one equation is a multiple of the other. Here, we can check that by multiplying the first equation by 4:
4 × (3.25x -1.5y) = 4 × 1.25
13x -6y = 5
We notice the other equation is ...
13x -6y = 10
Values of x and y that make 13x-6y=5 cannot also make that same sum be 10. These are called "inconsistent" equations, and they have No Solution.
Hypothetical: If the first equation were 3.25x -1.5y = 2.5, then multiplying it by 4 would give 13x -6y = 10, the same as the second equation. In this case, the equations would be called "dependent," and any of the infinite number of solutions to the first equation would also be a solution to the second equation.
PlanAfter you look at the equations to determine if any of the coefficients are 1, or have nice relations with the coefficients of the other equation, you can formulate a strategy for elimination or substitution. As we saw above, it can be useful to eliminate any fractions to start with. Sometimes, it is also useful to factor out any common factors. For example, 2x + 6y = 8 can be reduced to x +3y = 4 by factoring out 2 from every term.
Then, the variable that you solve for first will be the one that is left after you have done your substitution or elimination.
This SystemAs we saw above, the given equations can be rewritten as ...
13x -6y = 5 . . . . . . first equation multiplied by 413x -6y = 10We already know the same coefficients and different constants mean these equations are inconsistent and have No Solution. If we need further convincing we can subtract one from the other. Here, too, we can plan ahead a little bit: subtracting the first from the second will leave a positive constant:
(13x -6y) -(13x -6y) = (10) -(5)
0 = 5 . . . . . . . simplify (false)
There are no values of x and y that will make this false statement true, hence no solution.
A 1600 kg (empty) dump truck rolls with a speed of 2.5 m/s under a loading
bin and a mass of 3500 kg is deposited in the truck. Assuming the truck does
not stop to receive its load, what is the speed of the truck immediately after
loading?
arzonia became a state 96 years later than indiana.wich equation can be uesed to find year y arzonia became a state.
The equation that can be used to find the year y in which Arizonia became a state is y = x+ 96.
What are algebraic equations?Two expressions that are set equal to one another in a mathematical statement is the definition of an algebraic equation. A variable, coefficients, and constants are the typical components of an algebraic equation.
Both sides have equal weight, therefore it is balanced. Make sure that every modification made to one side of the equation is reflected on the other side to prevent a mistake from throwing the equation out of balance.
Let us suppose the year Indiana became a state = x.
Given that, Arizonia became a state 96 years later than Indiana.
This can be written algebraically as follows:
y = x + 96
Hence, the equation that can be used to find the year y in which Arizonia became a state is y = x+ 96.
Learn more about algebraic equation here:
https://brainly.com/question/15707224
#SPJ1
find parametric equations for the line of intersection of the planes and (b) find the angle between the planes. 3x-2y+z=1, 2x+y-3z=3
A. the parametric equations of the line of intersection:
x = 2 + 9t
y = 3 + 6t
z = 2 - 15t
B. the angle between the two planes will be between 0 and 90 degrees.
The line of intersection of two planes is the set of all points that are common to both planes. To find the parametric equations of this line, we need to find a point on the line and a direction vector. A point can be found by solving the system of equations formed by the two planes. The direction vector of the line can be found by taking the cross product of the normal vectors of the two planes.
The normal vectors of the planes can be found by taking the coefficients of x, y, and z in each equation and using them as the components of a vector:
Plane 1: normal vector = <3, -2, 1>
Plane 2: normal vector = <2, 1, -3>
The direction vector of the line is given by the cross product of these two normal vectors:
d = normal vector 1 x normal vector 2 = <3, -2, 1> x <2, 1, -3> = <9, 6, -15>
Next, we can find a point on the line by solving the system of equations formed by the two planes:
3x - 2y + z = 1
2x + y - 3z = 3
We can use any method to solve the system, such as substitution or elimination. By substitution, we can find that:
x = 2
y = 3
z = 2
So a point on the line is (2, 3, 2).
The angle between the two planes can be found using the dot product of the normal vectors:
cos(θ) = (normal vector 1 . normal vector 2) / (|normal vector 1| * |normal vector 2|)
where θ is the angle between the two vectors.
cos(θ) = (3 * 2 + (-2) * 1 + 1 * -3) / (sqrt(3^2 + (-2)^2 + 1^2) * sqrt(2^2 + 1^2 + (-3)^2))
cos(θ) = (3 - 2 - 3) / (sqrt(14) * sqrt(14))
cos(θ) = -8 / (2 * sqrt(14))
Therefore, the angle between the two planes is:
θ = acos(cos(θ)) = acos(-8 / (2 *sqrt(14)))
For more such questions on Planes
https://brainly.com/question/28247880
#SPJ4
Find the center of mass of a thin plate of constant density delta covering the region bounded by the parabola y = 5/2 x^2 and the line y = 10. The center of mass is located at (x, y) = (Simplify your answer. Type an ordered pair.)
Answer:
Step-by-step explanation:
a
a data set lists the number of olives on each pizza ordered in the last few hours at a pizza shop. for this data set, the minimum is 4, the median is 16, the third quartile is 19, the interquartile range is 4, and the maximum is 20. construct a box-and-whisker plot that shows the number of olives. hint: start by positioning the median first. then, position the first and third quartiles. last, position the minimum and maximum values. provide your answer below:
A box-and-whisker plot that shows the number of olives is shown in the image attached to the answer.
To construct the box-and-whisker plot from the given data we first need to find the first quartile.
To find the 1st quartile we will use the interquartile range and 3rd quartile.
Interquartile range = 3rd quartile - 1st quartile
(substitute the values given in the question)
4 = 19 - 1st quartile
1st quartile = 19 - 4
1st quartile = 15
hence we now have the complete data to construct the box-and-whiskers plot.
minimum = 4
first quartile = 15
median = 16
third quartile = 19
maximum = 20.
The plot is in the attached picture.
To know more about graphs
https://brainly.com/question/29254683
#SPJ4
Find the value of b if the slope of a line is -2/9 and pass through (B,5) and (-2,B)
Answer:
So the value of b is 7
Step-by-step explanation:
We can use the formula for the slope of a line given two points:
slope = (y2 - y1)/(x2 - x1)
where (x1, y1) and (x2, y2) are the two points on the line. We can plug in the given points (-2, B) and (B, 5) to get:
-2/9 = (5 - B)/(B - (-2)) = (5 - B)/(B + 2)
Multiplying both sides by (B + 2), we get:
-2(B + 2) = 9(5 - B)
Expanding and simplifying, we get:
-2B - 4 = 45 - 9B
7B = 49
B = 7
Consider the statement n2 + 1 ≥ 2n where n is an integer in [1, 4].
Identify the n values for which the equation is to be verified in order to prove the given statement.
(You must provide an answer before moving to the next part.)
Consider the statement that min(a, min(b, c)) = min(min(a, b), c) whenever a, b, and c are real numbers.
Click and drag the steps to prove min(a, min(b, c)) = min(min(a, b), c) whenever a, b, and c are real numbers. Assume a is the smallest real number.
(Note: In your proof, consider the left side of the equation first.)
Both sides of the equation simplify to a, and we can conclude that min(a, min(b, c)) = min(min(a, b), c) is true for all real numbers a, b, and c where a is the smallest.
One way to do this is through mathematical induction, which involves proving a statement for a specific set of values and then showing that it holds true for all other values. In this exercise, we will apply this method to prove two statements involving integers and real numbers.
Statement involving integers:
The given statement is n² + 1 ≥ 2n, where n is an integer in the range [1, 4]. In order to prove this statement, we need to verify it for all values of n in this range. We start with n = 1, which gives us 1² + 1 ≥ 2(1), or 2 ≥ 2. This is true, so we move on to n = 2, which gives us 2² + 1 ≥ 2(2), or 5 ≥ 4. This is also true. Continuing in this manner, we can verify that the statement is true for all values of n in the given range. Therefore, we can conclude that n² + 1 ≥ 2n is true for all integers in the range [1, 4].
Statement involving real numbers:
The given statement is min(a, min(b, c)) = min(min(a, b), c), where a, b, and c are real numbers and we assume that a is the smallest of the three. To prove this statement, we start with the left-hand side and simplify it using the assumption that a is the smallest real number:
min(a, min(b, c)) = min(a, b) if a ≤ b, otherwise min(a, b) = a
= min(min(a, b), c) if a ≤ min(a, b), otherwise min(min(a, b), c) = a
Next, we move on to the right-hand side of the equation and simplify it:
min(min(a, b), c) = min(a, c) if a ≤ c, otherwise min(a, c) = a
Since we assumed that a is the smallest real number, we know that a ≤ b and a ≤ c.
To know more about integer here.
https://brainly.com/question/15276410
#SPJ4
Example Hypothesis Test
A sugar manufacturer sells sugar in bags with a stated weight of 500g. If bags are
consistently underweight, then the manufacturers could be prosecuted by the Trading
Standards Office. If bags which are consistently over-filled, this could lead to loss of
revenue. The manufacturer wishes to establish whether the bags are being over-filled or
under-filled with sugar (You need to decide whether the mean weight is not 500g). A
sample of 20 bags is taken and the sample mean is found to be 497.855g (the population
standard deviation is known to be 5g).
The hypothesis tested are given as follows:
[tex]H_0: \mu = 500, H_a: \mu < 500[/tex]
What are the null and alternative hypothesis?The claim for this problem is given as follows:
"Bags are consistently underweight".
At the null hypothesis, we consider that the claim is false, that is, there is not enough evidence to conclude that the bags are underweight, hence:
[tex]H_0: \mu = 500[/tex]
At the alternative hypothesis, we test if there is enough evidence to conclude if the claim is true, hence:
[tex]H_a: \mu < 500[/tex]
Missing InformationThe problem asks for the null and for the alternative hypothesis.
More can be learned about the test of an hypothesis at brainly.com/question/13873630
#SPJ1
Evaluate 2x + 3y if x =2 and y = 8
On weekends, Roxanne likes to participate in skateboard competitions. She has learned a total of 28 different tricks. On some days, Roxanne will do all of her tricks during a competition. On other days, she only has time to do some of them. Let t represent the number of tricks Roxanne might do during a competition. Which inequality models the story? t> 28 t≥ 28 t < 28 t≤ 28
The inequality the determines the value of t as number of tricks Roxanne might do during a competition is t≤ 28.
What is inequality?An inequality in mathematics is a relation that compares two numbers or other mathematical expressions in an unequal way. The majority of the time, size comparisons between two numbers on the number line are made. Several types of inequalities are represented by a variety of notations.
Given that, she has learned a total of 28 different tricks.
If we suppose t as number of tricks Roxanne might do during a competition.
Then the inequality the determines the value of t is t≤ 28 .
Hence, the inequality the determines the value of t is t≤ 28 .
Learn more about inequality here:
https://brainly.com/question/11612965
#SPJ1
ASAP NEED HELP BADLY PLSS HELP
The required solution of the expression to put in the equation is x = 3.
What is Cross multiplication?To cross multiply two fractions, multiply the first fraction's numerator by the second's denominator and the second fraction's numerator by the first fraction's denominator.
According to question:To solve the equation 2.5/x = 10/12 for x, we can cross-multiply to eliminate the fractions:
2.5/x = 10/12
12(2.5) = 10x
30 = 10x
x = 3
Therefore, the solution to the equation is x = 3. To check, we can substitute x = 3 back into the original equation:
2.5/3 = 10/12
0.8333 = 0.8333
This confirms that x = 3 is indeed the solution to the equation.
To know more about Multiplication visit:
brainly.com/question/5992872
#SPJ1
PLEASE HELP ASAP! Due soon !
Answer:
See below
Step-by-step explanation:
-1 => not a real number √-1 is a complex number it does not exist
0 => 7, √0 is just 0
9 => √9 + 7 => 3 + 7 => 10
81 => √81 + 7 => 9 + 7 => 16
Performance task: congruency proofs
A Congruency Proof is a method of proving two figures are congruent by showing that their corresponding sides and angles are equal.
Why is Congruency Proof important in Math?Congruency Proof is important in Math because it provides a rigorous and systematic way to establish that two geometric figures have the same shape and size.
There are three types of congruency proofs.
Congruence on the side-angle-side (SAS).SSS (side-side-side) congruence:Angle-side-angle congruence (ASA):a) Congruence of side-angle-side (SAS).
Two congruent sets of sides, and the included angle between them is congruent.
b) SSS congruence occurs when two triangles have three pairs of congruent sides.
c) Angle-side-angle congruence (ASA):
The two triangles have two sets of congruent angles and a congruent included side.
Learn more about Congruency Proofs at:
https://brainly.com/question/30362006
#SPJ1
PLS HELP I WILL GIVE BRAILIEST!
ANSWER :
x = 28.75
EXPLANATION :
Based on the given conditions, formulate: [tex]37+d=80.69[/tex]
Rearrange unknown terms to the left side of the equation : [tex]d=80.69-37[/tex]
Calculate the sum or difference [tex]=43.69[/tex]
Solution : [tex]x=43.69[/tex]
Therefore, Maggy's sister contributed $43.69 to the gift.
A square has a perimeter of 20 yd. What is the length of each side?
Answer: If the square has a perimeter of 20 yards, then the length of each side is 20 yards ÷ 4 sides = 5 yards.
Step-by-step explanation:
What did you include in your response? Check all that apply. When the third side of the triangle is too short to intersect the other side, no triangles can be formed. When the third side is just long enough to meet the other side at one point, one triangle is formed. When the third side is long enough to intersect the other side at two points, two triangles are formed.
The correct responses are:
When the third side of the triangle is too short to intersect the other side, no triangles can be formed. When the third side is just long enough to meet the other side at one point, one triangle is formed. When the third side is long enough to intersect the other side at two points, two triangles are formed.What are the cases where SSA case result in zero, one, or two triangles?If you have SSA, the triangle is determined by the third side. It does not form a triangle if it is too short to intersect the other side. A triangle can also be formed if the third side is the ideal length to connect to the other two sides. Last but not least, the third side may be long enough to intersect the opposite side twice, forming two triangles.
Learn more about triangle at:
https://brainly.com/question/17335144
#SPJ1
complete question:
When using the law of sines, why can the SSA case result in zero, one, or two triangles?