Answers
Answer:
72 apples will be used and 4 will not
Answer:
She will use 72 apples and 4 apples will not be used.
Step-by-step explanation:
If she requires 9 apples for one pie... the she can make only 8 pies out of 76 apples.
hence she uses 72 apples...
Related Questions
Calculate the magnitude of the built-in field in the quasi-neutral
region of an exponential impurity distribution:
N= N0 e[-x/λ]
Let the surface dopant concentration be 1018 cm-3 and λ= 0.4 µm.
Compare this field to the maximum field in the depletion region of an
abrupt p-n junction with acceptor and donor concentrations of 1018
cm-3 and 1015 cm-3 , respectively, on the two sides of the junction.
Answers
The magnitude of the built-in field in the quasi-neutral region of an exponential impurity distribution can be calculated as:
Ebi = kT/q ln(Na Nd/ni^2)
After putting the values in the equation for Ebi, we get Ebi = 340 V/cm.
where k is the Boltzmann constant, T is the temperature, q is the charge of an electron, Na and Nd are the acceptor and donor concentrations, and ni is the intrinsic carrier concentration.
In this case, we have an exponential impurity distribution with N = N0 e[-x/λ], where N0 is the surface dopant concentration and λ = 0.4 µm. Therefore, the acceptor and donor concentrations are both 1018 cm-3, and the intrinsic carrier concentration can be calculated using ni^2 = Na Nd exp(-Eg/kT), where Eg is the bandgap energy. Assuming Si as the material with Eg = 1.12 eV, we get ni = 1.45x10^10 cm-3.
Substituting these values in the equation for Ebi, we get Ebi = 340 V/cm.
On the other hand, the maximum field in the depletion region of an abrupt p-n junction can be calculated using:
Emax = qNA/ε, where NA is the acceptor concentration in the p-region and ε is the dielectric constant of the material.
In this case, NA = 1018 cm-3 and assuming Si with ε = 11.7, we get Emax = 1.24x10^5 V/cm.
Comparing these two fields, we can see that the maximum field in the depletion region of an abrupt p-n junction is much larger than the built-in field in the quasi-neutral region of an exponential impurity distribution. This is because in an abrupt p-n junction, there is a sharp transition between the p and n regions, leading to a large concentration gradient and hence a large electric field.
To know more about Quasi-Neutral Region visit:
https://brainly.com/question/31324092
#SPJ11
Spencer spent a total of $704 in the month of July.
If you estimate the amount of money he spent on the specified categories,
select all the true statements about Spencer’s spending.
Answers
Answer:
stay safe
Step-by-step explanation:
Given : Spencers expenses
27% clothing,
11% Gasoline,
44% Food
18% Entertainment.
spencer spent a total of $704.00 in the month of July
To Find : estimate the amount of money he spent on clothing, to the nearest $10
Solution:
Spencers expenses
27% clothing,
11% Gasoline,
44% Food
18% Entertainment.
100 % Total
100 % = 704
1 % = 704/100
27 % = 27 * 704 /100
Estimation 27 x 700 /100
= 27 * 7
= 189
= 190 $
amount of money he spent on clothing, to the nearest $10 = 190 $
Exact ( 27 * 704 /100) = 190.08 ≈ 190 $
money he spent on clothing, to the nearest $10 = 190 $
determine if the lines are distinct parallel lines, skew, or the same line. 1()2()=⟨3 5,−3−5,2−2⟩=⟨11−6,6−11,2−4⟩. Choose the correct answer. The lines are the same line. The lines are skew. The lines are parallel.
Answers
The correct answer is: The lines are skew.
How to determine the relationship between two lines, specifically whether they are distinct parallel lines, skew, or the same line?To determine if the lines are distinct parallel lines, skew, or the same line, we can examine their direction vectors.
Let's denote the first line as L1 and the second line as L2. We'll start by finding the direction vectors of L1 and L2.
For L1, the direction vector is given by ⟨3, 5, -3⟩.
For L2, the direction vector is given by ⟨11, -6, 2⟩.
Now, let's compare the direction vectors to determine the relationship between the lines.
If the direction vectors are scalar multiples of each other, then the lines are parallel.
If the direction vectors are not scalar multiples of each other and not orthogonal (perpendicular), then the lines are skew.
If the direction vectors are orthogonal (perpendicular) to each other, then the lines are the same line.
To check if the direction vectors are scalar multiples, we can calculate their cross-product and check if it equals the zero vector.
The cross product of ⟨3, 5, -3⟩ and ⟨11, -6, 2⟩ is:
=(5 * 2 - (-3) * (-6))i - (3 * 2 - (-3) * 11)j + (3 * (-6) - 5 * 11)k
= (10 - 18)i - (6 - 33)j + (-18 - 55)k
= -8i - 27j - 73k
Since the cross product is not equal to the zero vector, the lines are not parallel.
Since the direction vectors are not scalar multiples and not orthogonal, the lines are skew.
Therefore, the correct answer is: The lines are skew.
Learn more about lines are distinct parallel lines, skew, or the same line.
brainly.com/question/1995934
#SPJ11
Lucy lives in a state where sales tax is 8%. This means you can find the total cost of an item, including tax, by using the expression c + 0. 08c, where c is the pre-tax price of the item. Use the expression to find the total cost of an item that has a pre-tax price of $36. 0
Answers
The total cost of an item with a pre-tax price of $36.00, including sales tax of 8%, is $38.88.
To calculate the total cost of an item with sales tax, we use the expression c + 0.08c, where c represents the pre-tax price of the item. In this case, c is $36.00.
Substituting the value of c into the expression, we have $36.00 + 0.08($36.00). Simplifying the expression, we get $36.00 + $2.88 = $38.88.
Therefore, the total cost of the item, including sales tax, is $38.88. This means that if Lucy purchases an item with a pre-tax price of $36.00, she will need to pay a total of $38.88, with $2.88 being the sales tax amount added to the original price.
Learn more about expression here:
https://brainly.com/question/28170201
#SPJ11
QUICK!! MY TIME IS RUNNING OUT
Answers
Answer:
a, x=3
Step-by-step explanation:
6x - 9 = 3x
-9 = 3x-6x
-9 = -3x
divide both sides by -3
3 = x
use the accompanying frequency polygon to answer the following questions
Answers
The frequency polygon is a graphical representation of the frequency distribution of a dataset. It shows the frequencies of different values or intervals on the x-axis and the corresponding frequencies on the y-axis.
By analyzing the frequency polygon, we can gather information about the distribution, shape, and central tendency of the data.
In the frequency polygon provided, the shape of the polygon indicates that the data is positively skewed. This means that the majority of the data values are clustered towards the lower end of the x-axis, with a tail extending towards the higher values. The highest frequency occurs at the leftmost end of the polygon, suggesting a peak or mode in that region.
Additionally, the frequency polygon provides insights into the central tendency of the data. The shape of the polygon suggests that the mean and median of the dataset may be different. Since the polygon is skewed to the right, the mean is likely to be larger than the median. This indicates that there are some relatively larger values in the dataset that are pulling the mean towards the higher end.
Overall, the frequency polygon helps visualize the distribution and central tendency of the data. It provides valuable information about the shape of the data and allows us to make inferences about its characteristics.
Learn more about x-axis here: https://brainly.com/question/2491015
#SPJ11
The rate of growth of a population of bacteria is given by P'(t) = 3e' -e, and it is known that P(2) = 3e. Which of the following represents the population P(t) at any time t? (A) P(t) = 3e^t -1/6e^6+3e^2 (B) P(t) = 3e^t (C) P(t) = 3e^t - te^5 + 2e^5 (D) P(t) = 2e^5 (E) P(t) = 3e^t - te^5
Answers
[tex]P(t) = 3e^t - e^t + 3e - 2e^2[/tex]
The rate of growth of a population of bacteria is given by [tex]P'(t) = 3e^t - e^t.[/tex] To find the population P(t) at any time t, you need to integrate P'(t) with respect to t.
[tex]∫(3e^t - e^t) dt = 3∫e^t dt - ∫e^t dt = 3e^t - e^t + C[/tex], where C is the constant of integration.
Now, use the given information P(2) = 3e to find C:
[tex]3e = 3e^2 - e^2 + C => C = 3e - 2e^2[/tex]
So, the population P(t) at any time t is:
[tex]P(t) = 3e^t - e^t + 3e - 2e^2[/tex]
Unfortunately, none of the given options exactly match this answer. Please check the original question for any typos or errors.
Learn more about integral here:
https://brainly.com/question/18125359
#SPJ11
Let B = {1, x, x^2 }be the standard basis for P2. Let T :P2 →P2 be the linear transformation defined by
T(p(x)) = p(2x −1) ; i.e. T(a +bx + cx^2 ) = a + b(2x −1) + c(2x −1)^2 . Compute T^4 (x +1) as follows.
(a) Find the matrix representation of T relative to basis B.
(b) Find the eigenvalues and eigenvectors of T (defined same way T has as an eigenvalue
iff Tx = x for some nonzero vector x) by finding the ones for its matrix representation and
then rewriting the eigenvector in P2.
(c) Write the eigenvector basis C consisting of functions in P2 and then write the coordinate
vector of x +1 with respect to eigenvector basis C.
(d) Find the matrix representation of T relative to basis C, and the matrix representation of T^4
which is T composed with itself 4 times again with respect to basis C.
Now give T^4 (x +1)
(i) as a coordinate vector with respect to basis C and
(ii) then as a coordinate vector with respect to basis B, and
(ii) calculate it also as an object (function) in P2 three times, the first time using the coordinate
vector with respect to basis C, the second time using the coordinate vector with respect to
basis B, and finally calculate it in P2 using the definition of T without using coordinates
Answers
To find the matrix representation of T relative to basis B, we apply T to each basis vector and express the result in terms of B.
T(1) = 1 + 0(2x - 1) + 0(2x - 1)^2 = 1
T(x) = 0 + 1(2x - 1) + 0(2x - 1)^2 = 2x - 1
T(x^2) = 0 + 0(2x - 1) + 1(2x - 1)^2 = 4x^2 - 4x + 1
Therefore, the matrix representation of T relative to basis B is:
| 1 0 0 |
| 0 2 -1 |
| 0 0 4 |
To find the eigenvalues and eigenvectors of T, we find the ones for its matrix representation and then rewrite them in P2.
The characteristic equation is det(T - λI) = 0, where I is the identity matrix. Solving this equation gives us the eigenvalues:
λ = 1, 2 ± √3
For each eigenvalue, we solve the system (T - λI)v = 0 to find the corresponding eigenvector v.
For λ = 1:
T - I = | 0 0 0 |
| 0 1 -1 |
| 0 0 3 |
This leads to the eigenvector v = (0, 1, 0).
For λ = 2 + √3:
T - (2 + √3)I = | -1 -√3 0 |
| 0 -√3 0 |
| 0 0 -1 |
This leads to the eigenvector v = (-√3, √3, 1).
For λ = 2 - √3:
T - (2 - √3)I = | 1 √3 0 |
| 0 √3 0 |
| 0 0 1 |
This leads to the eigenvector v = (√3, √3, 1).
The eigenvector basis C consists of the eigenvectors we found in P2:
C = {(0, 1, 0), (-√3, √3, 1), (√3, √3, 1)}
To write the coordinate vector of x + 1 with respect to basis C, we express x + 1 as a linear combination of the basis vectors:
x + 1 = a(0, 1, 0) + b(-√3, √3, 1) + c(√3, √3, 1)
Solving for a, b, and c gives us the coordinate vector [(0, a, b)] with respect to basis C.
To find the matrix representation of T relative to basis C, we apply T to each basis vector and express the result in terms of C. Using the definition of T, we have:
T(0, 1, 0) = 0
T(-√3, √3, 1) = (2√3, -2√3, 2)
T(√3, √3, 1) = (8√3, 0, 6)
Therefore, the matrix representation
Learn more about eigenvalues here: brainly.com/question/32388197
#SPJ11
In the figure, what is the value of z?
A. 2.9
B. 5.6
C. 6
D. 8.75
Answers
Answer:
B. 5.6
Step-by-step explanation:
The products of the lengths of the segments of each chord are equal.
5 × z = 7 × 4
5z = 28
z = 28/5
z = 5.6
Answer: B. 5.6
20 POINTS! PLEASE ACTUALLY SOLVE!
There is a stack of 10 cards, each given a different number from 1 to 10. Suppose we select a card randomly from the stack, replace it, and then randomly select another card. What is the probability that the first card is an odd number and the second card is less than 4? Write your answer as a fraction in the simplest form
Answers
The probability that the first card is an odd number and the second card is less than 4 is 3/20.
We have,
To calculate the probability, we need to determine the number of favorable outcomes (the desired outcomes) and the total number of possible outcomes.
Favorable outcomes:
The first card is an odd number and has a probability of 5/10 since there are 5 odd-numbered cards (1, 3, 5, 7, 9) out of a total of 10 cards.
The second card is less than 4 and also has a probability of 3/10 since there are 3 cards (1, 2, 3) less than 4 out of a total of 10 cards.
Total number of possible outcomes:
Since we replace the first card before selecting the second card, the total number of possible outcomes for each selection is still 10.
Now, to find the probability of both events happening, we multiply the probabilities of each event:
Probability = (Probability of the first card being odd) * (Probability of the second card being less than 4)
= (5/10) x (3/10)
= 15/100
= 3/20
Therefore,
The probability that the first card is an odd number and the second card is less than 4 is 3/20.
Learn more about probability here:
https://brainly.com/question/14099682
#SPJ1
non static local variables inside a function have a __________ scope and a lifetime of ___________
Answers
This means that the variable's value persists only within the block and is lost once the block is exited
Non-static local variables inside a function have a block scope and a lifetime of the block in which they are defined.
The block scope means that the variable is only accessible within the block of code where it is defined. It is not visible outside of that block, including in any nested blocks or in the global scope.
The lifetime of the variable is determined by the block in which it is defined. When the block is entered, the variable is created, and when the block is exited, the variable is destroyed.
This means that the variable's value persists only within the block and is lost once the block is exited.
To know more about variable's refer here
https://brainly.com/question/17344045#
#SPJ11
suppose 1 ~ b(r1 = 5, 1 = 1 ), 2 ~ b(2 = 7, 2 = 1 ), and 1 ⊥ 2. let = max(1, 2)
Answers
We have two independent beta distributions, 1 ~ [tex]b(r1=5, 1=1)[/tex]and 2 ~ b(r2=7, 2=1), and we are interested in the maximum value between them, denoted as[tex]max(1,2)[/tex].
Since the two beta distributions are independent, we can find the distribution of the maximum value by taking the convolution of their probability density functions (pdfs). Let f1(x) and f2(x) be the pdfs of the two beta distributions, then the pdf of the maximum value is given by:
[tex]f_max(x) = f1(x) * f2(x) = ∫ f1(t) * f2(x-t) dt[/tex]
where "*" denotes the convolution operation.
To evaluate the above integral, we can use the beta function identity:
[tex]B(a,b) \int\limits^1_0 {t^(a-1) * (1-t)^(b-1)} dt[/tex]
which allows us to express the pdfs of the beta distributions as:
[tex]f1(x) = (1/B(r1,1)) * x^(r1-1) * (1-x)^0, 0 < = x < = 1[/tex]
[tex]f2(x) = (1/B(r2,2)) * x^(r2-1) * (1-x)^1, 0 < = x < = 1[/tex]
Substituting these expressions in the convolution integral for f_max(x) and evaluating the integral, we obtain:
[tex]f_max(x) = (r1-1)! * (r2-2)! / (r1+r2-2)! * x^(r1+r2-2) * (1-x)[/tex]
Therefore, the distribution of the maximum value between 1 and 2 is a beta distribution with parameters r1+r2-2 and 1.
Learn more about distribution here:
https://brainly.com/question/29664127
#SPJ11
Find the probability that a randomly selected point within the circle falls in the red-shaded square.
4√2
8
8
P = [ ? ]
Answers
The probability that a randomly selected point within the circle falls in the red-shaded square is 63.7%
A figure is shown, in which a square is inscribed in a circle.
To find the probability that a randomly selected point within the circle falls in the red shaded area (Square).
radius = 4√2cm
side of square =8 cm
Area of the circle = πr²
= 3.14 × 16×2
= 100.48 cm²
Area of the square = side × side
= 8×8
= 64 cm²
Probability = Area of square / Area of the circle
= 64 / 100.48
= 63.7%
To learn more on probability click:
https://brainly.com/question/11234923
#SPJ1
translate and solve: 16 more than s is at most −80. give your answer in interval notation.
Answers
The solution to the equation "16 more than s is at most -80" in interval notation is (-∞, -96].
To solve the equation "16 more than s is at most -80," we need to translate the given statement into an algebraic expression and then solve for s.
Let's break down the given statement:
"16 more than s" can be translated as s + 16.
"is at most -80" means the expression s + 16 is less than or equal to -80.
Combining these translations, we have:
s + 16 ≤ -80
To solve for s, we subtract 16 from both sides of the inequality:
s + 16 - 16 ≤ -80 - 16
s ≤ -96
The solution for s is s ≤ -96. However, since the inequality includes "at most," we use a closed interval notation to indicate that s can be equal to -96 as well. Therefore, the solution in interval notation is (-∞, -96].
For more questions like Equation click the link below:
https://brainly.com/question/14598404
#SPJ11
An exponential function f(x)=a(b)* can model the data in the table. Which function best models the data? f(X) 5.0 7.9 12.8 20.5 A. flx)=0.625* B f(x) =5(0.625)* flx)=5(1.6)* D: f(x) = 1.6*
Answers
The function that best models the data is f(x) = 5(1.6)^x.
To determine the best model for the given data, we need to look at the base of the exponential function (b). This base indicates the growth factor from one data point to the next. Since the data is increasing, we can rule out the functions with a base less than 1 (A and B). Now we can compare the remaining options (C and D) by observing the growth factor in the data:
From 5.0 to 7.9, the growth factor is approximately 7.9 / 5.0 ≈ 1.58.
From 7.9 to 12.8, the growth factor is approximately 12.8 / 7.9 ≈ 1.62.
From 12.8 to 20.5, the growth factor is approximately 20.5 / 12.8 ≈ 1.60.
The average growth factor is around 1.6, which corresponds to the base in option C.
Based on the analysis of the growth factor, the function f(x) = 5(1.6)^x best models the data in the table.
To know more about factor visit:
https://brainly.com/question/14209188
#SPJ11
Select all that apply. Which types of formulae can not be derived by an application of existential elimination (EE)? 1 points A. atomic formulae B. conjunctions C. disjunctions D. conditionals E. biconditionals E. negations G. universals H. existentials I. the falsum J. none of the above-all formula types can be derived using E
Answers
The options A, B, D, E, F, J can not be derived by an application of existential elimination.
What is existential elimination?By eliminating an existential quantifier, one can infer a formula that contains a new variable using the predicate logic inference rule known as EE.
Since existential quantifiers are not present in atomic formulae, conjunctions, disjunctions, conditionals, biconditionals, negations, and the falsum, they cannot be derived using EE and can not be obtained via the use of EE.
Learn more about existential elimination:https://brainly.com/question/30035243
#SPJ1
anova’s are used when the study has: three or more groups to compare one or more groups to compare four or more groups to compare five or more groups to compare
Answers
ANOVA is generally used when a study has three or more groups to compare, but it can also be applied to situations with fewer than three groups
ANOVA (Analysis of Variance) is a statistical test used to analyze the differences between means when comparing two or more groups. The specific number of groups required for using ANOVA depends on the research question and design of the study.
In general, ANOVA is commonly used when there are three or more groups to compare. It allows for the examination of whether there are statistically significant differences between the means of these groups.
This can be useful in various research scenarios where multiple groups are being compared, such as in experimental studies with different treatment conditions, or in observational studies with multiple categories or levels of a variable.
However, it is important to note that ANOVA can also be used when there are only two groups, although a t-test may be more appropriate in such cases.
On the other hand, there is no inherent restriction on the maximum number of groups for conducting an ANOVA. It can be used when comparing four, five, or even more groups, as long as the necessary assumptions of the test are met and the research question warrants the comparison.
To know more about ANOVA refer to
https://brainly.com/question/31809956
#SPJ11
Directions: Arrange and write the numbers in increasing order. This means from smallest to largest, or increasing in value.
Example:
+4, -3, +2, +10, -1 becomes -3, -1, +2, +4, +10
1. +2, -5, +3, -4, +1
2. -9, -2, +7, -6, +5
3. -5, -8, -3, +4, +3
4. +8, +5, +2, +7, -6
5. -4, +6, -6, +4, -7
6. +8, +5, +9, -6, -9
7. -7, -2, +4, -5, -1
8. +3, +5, -5, +6, +2
9. -6, +4, -8, +7, -2
10. -3, +8, -4, +1, -7
Answers
Answer:
1. -5, -4, +1, +2, +3
2. -9, -6, -2, +5, +7
3. -8, -5, -3, +3, +4
4. -6, +2, +5, +7, +8
5. -7, -6, -4, +4, +6
6. -9, -6, +5, +8, +9
7. -7, -5, -2, -1, +4
8. -5, +2, +3, +5, +6
9. -8, -6, -2, +4, +7
10. -7, -4, -3, +1, +8
Consider following information: Probability of the state of economy Rate of return if state occurs Stock 1 Stock 2 Recession 0.2 3 % 2 % Boom 0.8 10 % 8 % 1) Calculate the expected return of a Portfolio1 invested 40% in Stock 1 and 60% in Stock 2. Express your answer as %. 2) Calculate the standard deviation of a return on a Portfolio1 invested 40% in Stock 1 and 60% in Stock 2. Express your answer as %.
Answers
The standard deviation of the return on Portfolio1 invested 40% in Stock 1 and 60% in Stock 2 is 0.83%.
To calculate the expected return of Portfolio1, we can use the formula:
Expected return of Portfolio1 = (Weight of Stock 1 x Rate of return of Stock 1) + (Weight of Stock 2 x Rate of return of Stock 2)
Using the given information, we have:
Expected return of Portfolio1 = (0.4 x 3%) + (0.6 x 8%) = 1.2% + 4.8% = 6%
Therefore, the expected return of Portfolio1 invested 40% in Stock 1 and 60% in Stock 2 is 6%.
To calculate the standard deviation of the return on Portfolio1, we need to calculate the variance first. The variance formula for a portfolio is:
[tex]Variance of Portfolio1 = (Weight of Stock 1)^2 x Variance of Stock 1 +[/tex][tex](Weight of Stock 2)^2 x Variance of Stock 2 + 2 x Weight of Stock 1[/tex] [tex]x Weight of Stock 2 x Covariance between Stock 1 and Stock 2[/tex]
The covariance between Stock 1 and Stock 2 can be calculated using the formula:
[tex]Covariance between Stock 1 and Stock 2 = Correlation between Stock 1[/tex] and[tex]Stock 2 x Standard deviation of Stock 1 x Standard deviation of Stock 2[/tex]
The correlation between Stock 1 and Stock 2 is not given, so we assume it to be 0. This means that the returns of Stock 1 and Stock 2 are not correlated with each other.
Using the given information, we have:
Variance of Stock 1 = (0.2 x (3% - 6%)^2) + (0.8 x (10% - 6%)^2) = 0.68%
Variance of Stock 2 = (0.2 x (2% - 6%)^2) + (0.8 x (8% - 6%)^2) = 1.44%
Covariance between Stock 1 and Stock 2 = 0 x SQRT(0.68%) x SQRT(1.44%) = 0
Using these values, we can calculate the variance of Portfolio1:
Variance of Portfolio1 = (0.4)^2 x 0.68% + (0.6)^2 x 1.44% + 2 x 0.4 x 0.6 x 0 = 0.696%
Finally, the standard deviation of Portfolio1 can be calculated by taking the square root of the variance:
Standard deviation of Portfolio1 = SQRT(0.696%) = 0.83%
Therefore, the standard deviation of the return on Portfolio1 invested 40% in Stock 1 and 60% in Stock 2 is 0.83%.
Learn more about deviation here:
https://brainly.com/question/31835352
#SPJ11
Andy made a deposit to his checking account and received $50 in cash. His deposit slip shows a total deposit of $500. If he deposits checks worth 4 time the value of the currency deposited, how much did he deposit in a currency and checks
Answers
Andy made a deposit to his checking account and received $50 in cash. His deposit slip shows a total deposit of $500. If he deposits checks worth 4 times the value of the currency deposited, we need to find the amount he deposited in currency and checks.
Let's denote the amount deposited in currency as "C" dollars. According to the information given, Andy received $50 in cash, so we have:
C + $50 = $500
Simplifying the equation, we find:
C = $500 - $50
C = $450
Now, we need to find the amount deposited in checks, denoted as "X" dollars. The checks are worth 4 times the value of the currency deposited, so we have:
X = 4 * C
X = 4 * $450
X = $1800
Therefore, Andy deposited $450 in currency and $1800 in checks, resulting in a total deposit of $500.
Learn more about deposit here:
https://brainly.com/question/28273286
#SPJ11
please solve for all values of real numbers x and y that satisfy the following equation: −1 (x iy)
Answers
The only real number that satisfies the equation on complex number is -1. The complex number that satisfies the equation is :-1 + i0 = -1.
-1 = (x + iy)
where x and y are real numbers.
To solve for x and y, we can equate the real and imaginary parts of both sides of the equation:
Real part: -1 = x
Imaginary part: 0 = y
Therefore, the only solution is:
x = -1
y = 0
So, the complex number that satisfies the equation is:
-1 + i0 = -1
Therefore, the only real number that satisfies the equation on complex number is -1.
For such more questions on real number
https://brainly.com/question/20588403
#SPJ11
we first need to simplify the expression. We can do this by distributing the negative sign, which gives us -x - i(y).
Now, we need to find all values of x and y that make this expression equal to 0.
This means that both the real and imaginary parts of the expression must be equal to 0. So, we have the system of equations -x = 0 and -y = 0. This tells us that x and y can be any real numbers, as long as they are both equal to 0. Therefore, the solution to the equation −1 (x iy) for all values of real numbers x and y is (0,0).
Step 1: Write down the given equation: -1(x + iy)
Step 2: Distribute the -1 to both x and iy: -1 * x + -1 * (iy) = -x - iy
Step 3: Notice that -x - iy is a complex number, so we want to find all real numbers x and y that create this complex number. The real part is -x, and the imaginary part is -y. Therefore, the equation is satisfied for all real numbers x and y, since -x and -y will always be real numbers.
Learn more about real numbers here: brainly.com/question/30480761
#SPJ11
paloma, while driving at a constant speed of 45 mph, begins to speed up in such a way that her velocity t hours later is v(t) 45 12t mph. how far does she travel in the first 2 hours?
Answers
Paloma travels a total of 90 + 48 = 138 miles in the first 2 + (t-2) hours.
To find how far Paloma travels in the first 2 hours, we need to calculate her total distance traveled during that time. We know that she is driving at a constant speed of 45 mph for the first 2 hours, so we can calculate the distance she travels at that speed using the formula:
distance = speed × time
distance = 45 mph × 2 hours
distance = 90 miles
After 2 hours, Paloma begins to speed up, and her velocity is given by the function v(t) = 45 + 12t mph. To find her total distance traveled during this time, we need to integrate her velocity function over the interval [2, t]:
distance = ∫2t v(t) dt
distance = ∫2t (45 + 12t) dt
[tex]distance = [45t + 6t^2]2t[/tex]
[tex]distance = 90t + 12t^2 - 180[/tex]
Now we can substitute t = 2 into the above formula to find the distance traveled during the first 2 hours:
distance = 90(2) + 12(2)^2 - 180
distance = 180 + 48 - 180
distance = 48 miles
Therefore, Paloma travels a total of 90 + 48 = 138 miles in the first 2 + (t-2) hours.
To know more about miles refer here:
https://brainly.com/question/23245414
#SPJ11
Consider the LP problemmin z = -2x1 - x2s.t. x1 - x2 <= 2x1 + x2 <= 6x1 , x2 (non-negativity)Convert the problem into standard form and construct a basic feasible solutionat which (x1 , x2 ) = (0, 0).
Answers
The LP problem min z = -2x1 - x² s.t. x - x² = 2, x + x² = 6, x , x2 =(non-negativity), the basic feasible solution in standard form is (x, x², s, s²) = (0, 0, 2, 6).
For the linear programming (LP) problem. The given problem is:
Minimize z = -2x - x²
Subject to:
x - x² <= 2
x + x² <= 6
x, x² >= 0 (non-negativity)
First, let's convert the problem into standard form by introducing slack variables to eliminate inequalities:
x- x² + s = 2
x + x² + s² = 6
x, x², s, s² >= 0
Now, let's construct a basic feasible solution at which (x1, x2) = (0, 0):
0 - 0 + s = 2 => s = 2
0 + 0 + s² = 6 => s² = 6
So, the basic feasible solution in standard form is (x, x², s, s²) = (0, 0, 2, 6).
Read more about LP problem.
https://brainly.com/question/15417573
#SPJ11
A certain gaming console company wants to estimate the lifetime rate of their newest console. The gaming company’s in-house records showed that 80% of the older model consoles they had sold still worked after 3 years. If they test 34 new consoles, what is the probability that exactly 26 consoles are still working after 3 years of use?
The probability that exactly 26 out of the 34 consoles are still working after 3 years is
Answers
The probability that exactly 26 out of the 34 consoles are still working after 3 years of use is approximately 0.0048.
Let p be the probability that a console still works after three years. Then, using binomial distribution, the probability that exactly k consoles will still work after three years is given by the formula: P(k) = (n choose k)pk(1 - p)n-kwhere n is the total number of consoles tested and (n choose k) is the number of ways to choose k consoles from n total.Using the given information, p = 0.8 (since 80% of the older consoles still worked after 3 years) and n = 34 (since 34 new consoles are being tested).So, the probability that exactly 26 out of the 34 consoles still work after 3 years is:P(26) = (34 choose 26)(0.8)26(1 - 0.8)34-26= (183579396)/(38146972656)= 0.0048 (rounded to four decimal places)
Know more about probability here:
https://brainly.com/question/32575884
#SPJ11
to find a power series for the function, centered at 0. f(x) = ln(x6 1)
Answers
The power series for f(x) centered at 0 is:
6 ln(x) + ∑[n=1 to ∞] (-1)^(n+1) / (n x^(6n))
To find a power series for the function f(x) = ln(x^6 + 1), we can use the formula for the Taylor series expansion of the natural logarithm function:
ln(1 + x) = x - x^2/2 + x^3/3 - x^4/4 + ...
We can write f(x) as:
f(x) = ln(x^6 + 1) = 6 ln(x) + ln(1 + (1/x^6))
Now we can substitute u = 1/x^6 into the formula for ln(1 + u):
ln(1 + u) = u - u^2/2 + u^3/3 - ...
So we have:
f(x) = 6 ln(x) + ln(1 + 1/x^6) = 6 ln(x) + 1/x^6 - 1/(2x^12) + 1/(3x^18) - 1/(4x^24) + ...
Thus, the power series for f(x) centered at 0 is:
6 ln(x) + ∑[n=1 to ∞] (-1)^(n+1) / (n x^(6n))
To know more about power series refer here:
https://brainly.com/question/29896893
#SPJ11
To prove that 2 functions are of each other, one must show that f(g(x)) = x and g(f(x)) = x
Answers
To prove that two functions are inverses of each other, it is necessary to show that both of the conditions f(g(x)) = x and g(f(x)) = x hold, but this does not necessarily mean that the two functions are equal.
We have,
This statement is not entirely correct.
To prove that two functions are inverses of each other, it is indeed necessary to show that both of the following conditions hold:
f(g(x)) = x for all x in the domain of g
g(f(x)) = x for all x in the domain of f
Now,
This does not necessarily mean that the two functions are equal to each other.
For example,
Consider the functions f(x) = x + 1 and g(x) = x - 1.
It can be shown that f(g(x)) = x and g(f(x)) = x for all values of x, which satisfies the conditions for being inverses of each other.
However, it is clear that f(x) and g(x) are not the same functions.
Thus,
To prove that two functions are inverses of each other, it is necessary to show that both of the conditions f(g(x)) = x and g(f(x)) = x hold, but this does not necessarily mean that the two functions are equal.
Learn more about functions here:
https://brainly.com/question/28533782
#SPJ1
You buy 4 snacks and a drink. The snacks cost $1.40 each. You pay with a $10 bill and receive $1.65 in change. How much does the drink cost?
Answers
The drink costs $2.75.
We have,
The cost of 4 snacks.
= $1.40 × 4
= $5.60.
Let's call the cost of the drink "d".
The total cost of snacks and a drink.
= $5.60 + d.
You pay with a $10 bill, so the equation is:
$10 = $5.60 + d + $1.65
We can simplify this equation by combining like terms:
$10 = $7.25 + d
To solve for "d", we can isolate it on one side of the equation by subtracting $7.25 from both sides:
$d = $10 - $7.25
d = $2.75
Thus,
The drink costs $2.75.
Learn more about equations here:
https://brainly.com/question/17194269
#SPJ1
suppose a, b, n ∈ z with n > 1. suppose that ab ≡ 1 (mod n). prove that both a and b are relatively prime to n.
Answers
Therefore, our initial assumption that a and n are not relatively prime must be false, and we can conclude that a and n are indeed relatively prime numbers.
To prove that both a and b are relatively prime to n given that ab ≡ 1 (mod n), we will use contradiction. Assume that a and n are not relatively prime, meaning they have a common factor greater than 1. Then, we can write a = kx and n = ky, where k > 1 and x and y are relatively prime.
Substituting a = kx into ab ≡ 1 (mod n), we get kxb ≡ 1 (mod ky). Multiplying both sides by x, we get kxab ≡ x (mod ky). Since k > 1 and x are relatively prime, kx and ky are also relatively prime. Therefore, we can cancel out kx from both sides of the congruence, leaving b ≡ x (mod y). Now, suppose that b and n are not relatively prime, meaning they have a common factor greater than 1. Then, we can write b = jy and n = jm, where j > 1 and y and m are relatively prime.
Substituting b = jy into ab ≡ 1 (mod n), we get ajy ≡ 1 (mod jm). Multiplying both sides by y, we get ajym ≡ y (mod jm). Since j > 1 and y are relatively prime, jy and jm are also relatively prime. Therefore, we can cancel out jy from both sides of the congruence, leaving am ≡ 1 (mod j). But since k and j are both greater than 1, and n = ky = jm, we have k and j as common factors of n, which contradicts the assumption that x, y, and m are relatively prime.
To know more about prime numbers,
https://brainly.com/question/30358834
#SPJ11
Pls help I’m stuck I need the answer soon
Answers
The graph C represents the function y = (1/2)ˣ
To graph the function y = (1/2)ˣ we can plot a few points and connect them with a smooth curve.
When x = 0, we have y = (1/2)⁰ = 1, so the point (0, 1) is on the graph.
When x = 1, we have y = (1/2)¹ = 1/2, so the point (1, 1/2) is on the graph.
When x = -1, we have y = (1/2)⁻¹ = 2, so the point (-1, 2) is on the graph.
We can also find other points by plugging in different values of x.
All the points are located in the graph C with a smooth curve
To learn more on Graph click:
https://brainly.com/question/17267403
#SPJ1
say in a card game you can score any one of 5 different numbers. taken two at a time, how many possible samples exist?
Answers
There are 10 possible samples of two numbers that can be scored in the card game.
To find the number of possible samples of two numbers that can be scored in the card game, we can use the combination formula:
nCr = n! / r!(n-r)!
Here, n = 5 (since there are 5 different numbers), and we want to choose 2 at a time. Therefore, r = 2.
Plugging in these values, we get:
5C2 = 5! / 2!(5-2)! = 10
Therefore, there are 10 possible samples of two numbers that can be scored in the card game.
To know more about combinations refer here:
https://brainly.com/question/13387529
#SPJ11