Can someone answer these please???



Tyler cleaned 20 ears of corn in ¾ hour, Tonya cleaned 15 ears of corn in ½ hour, Tara cleaned 30 ears of corn in 1 ½ hours, and Tony cleaned 40 ears of corn in 2 hours. Who cleaned the corn the fastest?


8. It took 12 gallons for Kyle to refill his tanks after driving 350 miles and it took 9 gallons of gas for Bertie to fill her tank after driving 312 miles. Who got the best gas mileage?


9. Kenneth mowed 3 lawns in 7 hours, Greg mowed 2 lawns in 3 hours, and Wayne mowed 5 lawns in 9 hours. Who mowed the fastest?


10. Maxine used 2 potatoes to make ½ gallon of stew. How many potatoes should she use if she is going to make a gallon of stew?

Let's assume her time for the third race is x seconds.which is 27.4 seconds.

We know that her fastest time was 26.3 seconds and her slowest time was 30.3 seconds. Therefore, we can set up the following inequalities:

26.3 < x < 30.3

Now, we know that Layla ran the 200-meter race 3 times, and her average time was 28.0 seconds. The average is calculated by summing the times of all races and dividing by the number of races:

(26.3 + x + 30.3) / 3 = 28.0

Let's solve this equation to find the value of x:

26.3 + x + 30.3 = 3 * 28.0

56.6 + x = 84.0

x = 84.0 - 56.6

x = 27.4

Therefore, Layla's time for the third race was 27.4 seconds.

to know more about average,visit:

https://brainly.com/question/897199

#SPJ11

Jannie's adjusted monthly pocket money can be calculated by multiplying his current pocket money (R150) by the ratio of the increase (6:5). The calculation involves finding the equivalent fraction of the ratio and multiplying it by the current pocket money.

To calculate Jannie's adjusted monthly pocket money, we need to determine the amount of increase based on the given ratio of 6:5. The ratio indicates that for every 6 parts, the pocket money increases by 5 parts.
First, we convert the ratio to an equivalent fraction. The ratio 6:5 can be written as 6/5. This fraction represents the increase in pocket money per month.
Next, we calculate Jannie's adjusted pocket money by multiplying his current pocket money (R150) by the fraction representing the increase. The calculation is as follows:
Adjusted pocket money = Current pocket money × Fraction representing the increase
= R150 × 6/5
= R180
Therefore, Jannie's adjusted monthly pocket money after the increase is R180.

Learn more about ratio here
https://brainly.com/question/13419413



#SPJ11

The area of the shape is 224cm²

The area of a shape is the space occupied by the boundary of a plane figures like circles, rectangles, and triangles.

The shape can be divided into two rectangles and a trapezoid.

area of first rectangle = 9 × 6 = 54 cm²

area of second triangle = 12 × 11 = 132 cm²

area of trapezoid = 1/2( a+b) h

= 1/2 ( 12 +7) 4

= 1/2 × 19 × 4

= 19 × 2

= 38 cm²

Therefore the area of the shape is

54 + 132 +38

= 224 cm²

learn more about area of shape from

https://brainly.com/question/25965491

#SPJ1

We need to deal with sin^4(2x), which is equal to (sin^2(2x))^2. Applying the power reduction formula for sin^2(2x):
sin^4(2x) = ((1 - cos(4x))/2)^2
This expression does not contain any exponents greater than 1 and utilizes the power reduction formula as requested.

Using the power reduction formula for sin(2x), we have:
sin(2x) = 2sin(x)cos(x)
Substituting this into the expression sin^4(2x), we get:
sin^4(2x) = (2sin(x)cos(x))^4
Expanding this expression, we get:
sin^4(2x) = 16sin^4(x)cos^4(x)
Therefore, we can rewrite sin^4(2x) using the power reduction formula as:
16sin^4(x)cos^4(x)
the expression using power reduction formulas. Given the expression sin^4(2x), we can apply the power reduction formula for sin^2(x):
sin^2(x) = (1 - cos(2x))/2
Now, we need to deal with sin^4(2x), which is equal to (sin^2(2x))^2. Applying the power reduction formula for sin^2(2x):
sin^4(2x) = ((1 - cos(4x))/2)^2
This expression does not contain any exponents greater than 1 and utilizes the power reduction formula as requested.

To know more about power reduction visit:

https://brainly.com/question/16760406

#SPJ11

In the given right triangle, where the length of one side is a = 7 and the length of another side is x (unknown), the task is to determine the value of tan θ. The provided answer choices are √49 - 22/7, √49 - 2/7, and √49 - 2.

Explanation:

To determine the value of tan θ, we need to use the definition of the tangent function, which is equal to the ratio of the length of the opposite side to the length of the adjacent side in a right triangle. In this case, the opposite side is a and the adjacent side is x. Therefore, tan θ = a/x.

Given that a = 7, we can substitute this value into the expression: tan θ = 7/x.

From the answer choices, we can simplify each expression to determine the correct value.

The expression √49 - 22/7 can be simplified as √27/7, which is not equal to 7/x.

The expression √49 - 2/7 can be simplified as √47/7, which is also not equal to 7/x.

The expression √49 - 2 can be simplified as √47, which is not equal to 7/x.

None of the provided answer choices is equal to the expression 7/x, which means we cannot determine the exact value of tan θ without knowing the length of the other side (x)

Learn more about tangent function here:

https://brainly.com/question/28994024

#SPJ11

The surface area of the box that Anthony decorates is 318 square feet.

To find the surface area of the box that Anthony decorates, we need to add up the areas of all six faces of the right rectangular prism.

The dimensions of the prism are:

Length = 9 ft

Width = 7 ft

Height = 6 ft

Looking at the net, we can see that there are two rectangles with dimensions 9 ft by 7 ft (top and bottom faces), two rectangles with dimensions 9 ft by 6 ft (front and back faces), and two rectangles with dimensions 7 ft by 6 ft (side faces).

The areas of the six faces are:

Top face: 9 ft x 7 ft = 63 sq ft

Bottom face: 9 ft x 7 ft = 63 sq ft

Front face: 9 ft x 6 ft = 54 sq ft

Back face: 9 ft x 6 ft = 54 sq ft

Left side face: 7 ft x 6 ft = 42 sq ft

Right side face: 7 ft x 6 ft = 42 sq ft

Adding up these areas, we get:

Surface area = 63 + 63 + 54 + 54 + 42 + 42

Surface area = 318 sq ft

Therefore, the surface area of the box that Anthony decorates is 318 square feet.

To know more about surface area follow

https://brainly.com/question/27577718

#SPJ1

Given statement "The analyst gets to choose the significance level of alpha. It is typically chosen to be 0.50 but it is occasionally chosen to be 0.05" is false. The significance level alpha is typically not chosen to be 0.50 or 0.05.

The significance level alpha represents the probability of rejecting the null hypothesis when it is actually true, and is usually set to a small value such as 0.05 or 0.01.

This is to ensure that the probability of making a Type I error (rejecting the null hypothesis when it is actually true) is kept low.

Choosing a significance level of 0.50 would mean that there is a 50% chance of rejecting the null hypothesis when it is actually true, which is unacceptably high.

A significance level of 0.05 is more commonly used to ensure a low probability of Type I error.

However, the choice of significance level may depend on the context of the hypothesis test and the consequences of making a Type I or Type II error.

For similar question on significance level

https://brainly.com/question/28027137

#SPJ1

False. The analyst does get to choose the significance level of alpha, but it is not typically chosen to be 0.50. In fact, 0.50 is a very high significance level and would result in a high chance of a Type I error (rejecting a true null hypothesis).

The more commonly used significance level is 0.05, which results in a lower chance of Type I error. However, the significance level chosen ultimately depends on the specific research question, the level of risk the analyst is willing to take, and the consequences of making a Type I or Type II error.

False. The analyst does choose the significance level of alpha, but the given values are incorrect. Typically, alpha is chosen to be 0.05, indicating a 5% chance of committing a Type I error (rejecting a true null hypothesis). Occasionally, alpha may be set at 0.01 or 0.10, but it is rarely, if ever, chosen to be 0.50, as that would imply a 50% chance of committing a Type I error, which is considered too high for most analyses.

Learn more about null hypothesis at: brainly.com/question/28920252

#SPJ11

Answer: It takes 30 hours using the hose alone to fill the swimming pool.

Step 1: Make denominators the same

Step 2: Add or Subtract the numerators (keeping the denominator the same)

Step 3: Simplify the fraction

To add or subtract unlike fractions, the first step is to make denominators the same so that numerators can be added just like we do for like fractions.

Let  represent the swimming pool be filled with hose alone.

Given that using the pipe alone it takes 12 hours. using both it takes 8 4/7 hours. According to given condition,

Read more on Brainly.com - https://brainly.com/question/30357423#readmore

To use the chase test, we first write out all the dependencies as implications, and then apply the rules of inference to derive new implications until we can no longer derive any more. If the dependency we are testing can be derived from the set of original dependencies, then it holds in the relation.

a) To test whether a → d holds, we first write it as an implication: a → ad. Then we apply the rule of augmentation to get a → abcde. Applying the rule of decomposition gives us a → ad, which means the dependency holds.

b) To test whether a →→ d holds, we start by writing it as two implications: a → d and ad → d. Applying the rule of transitivity gives us a → d, which means the dependency holds.

c) To test whether a → e holds, we first write it as an implication: a → ae. Then we apply the rule of augmentation to get a → abcde. Applying the rule of decomposition gives us a → ae, which means the dependency holds.

d) To test whether a →→ e holds, we start by writing it as two implications: a → e and ae → e. Applying the rule of transitivity gives us a → e, which means the dependency holds.

In conclusion, the chase test can be used to determine whether dependencies hold in a relation. By writing out the dependencies as implications and applying the rules of inference, we can derive new implications and determine whether the dependency we are testing can be derived from the original set of dependencies. In this case, we have shown that all four dependencies hold in the relation r(a, b, c, d, e).

To know more about Relation visit:

https://brainly.com/question/6241820

#SPJ11

The arrow on the spinner will land on the green section approximately 100 times out of 700 spins.

To determine the number of times the arrow on the spinner will land on the green section, we need to consider the proportion of the green section on the spinner. If the spinner is divided into multiple equal sections, let's say there are 10 sections in total, and the green section covers 1 of those sections, then the probability of landing on the green section in a single spin is 1/10.

Since the arrow is spun 700 times, we can multiply the probability of landing on the green section in a single spin (1/10) by the number of spins (700) to find the expected number of times it will land on the green section. This calculation would be: (1/10) * 700 = 70.

Therefore, the arrow on the spinner will land on the green section approximately 70 times out of 700 spins.

Learn more about times here:

https://brainly.com/question/26941752

#SPJ11

A constant variable definition for pi is "a mathematical constant representing the ratio of a circle's circumference to its diameter" and to assign it a value of 3.14 the syntax is : const pi = 3.14; will assign pi a value of 3.14.

To write a constant variable definition for pi and assign it a value of 3.14,

On defined pi as a constant variable using the keyword "const," its value cannot be changed.

To learn more about variable: https://brainly.com/question/28248724

#SPJ11

a) Type I error.

To know more about null hypothesis refer here:

https://brainly.com/question/28920252

#SPJ11

The area enclosed by the curve with the equation r = 1 - 0.3sin(θ) can be found by evaluating the integral of 0.5[tex](1 - 0.3sin(θ))^2[/tex] with respect to θ over the range from 0 to 2π. The exact value of this integral may require numerical methods or approximations.

To determine the range of θ values, we need to examine the curve and identify the interval over which it encloses an area. From the equation r = 1 - 0.3sin(θ), we can see that the curve forms a closed loop. The value of θ varies from 0 to 2π to complete one full loop of the curve.

Using the formula for calculating the area in polar coordinates, the enclosed area can be obtained by integrating [tex]0.5r^2[/tex]dθ over the range of θ values. In this case, we have:

Area = 0.5 ∫[0 to 2π] [tex](1 - 0.3sin(θ))^2[/tex] dθ

Evaluating this integral will give us the area enclosed by the curve.

Learn more about polar coordinates here:

https://brainly.com/question/31904915

#SPJ11

The parametric equations for the portion of the cone are: r(t) = t, θ(t) = t, z(t) = 2√2t where t is a parameter that ranges from 0 to √8.

To parametrize the portion of the cone z - √(8x^2 + 8y^2) with 0 ≤ z ≤ √8, we can use cylindrical coordinates. Let's denote the parameters as r, θ, and z.

We know that x = rcosθ, y = rsinθ, and z = z.

Substituting these values into the equation of the cone, we have:

z - √(8(rcosθ)^2 + 8(rsinθ)^2) = 0

Simplifying the expression inside the square root, we get:

z - √(8r^2(cos^2θ + sin^2θ)) = 0

z - √(8r^2) = 0

z - 2√2r = 0

From this equation, we can express z in terms of r as:

z = 2√2r

Know more about parametric equations here:

https://brainly.com/question/28537985

#SPJ11

a) The power of the test for this two sided alternative is 0.684

b) We need a sample size of at least 716 from each machine to detect the difference with a probability of at least 0.9 and a significance level of 0.05.

The power of the test, denoted by 1 - β, where β is the probability of failing to reject the null hypothesis when it is actually false, can be calculated using the non-central standard normal distribution.

Using the given values, we have n1 = n2 = 300, p1 = 0.05, p2 = 0.01, α = 0.05, and δ = 0.04. Substituting these values into the formula, we can compute the power of the test as follows:

1 - β = P( Z > Z0.025 - 0.04√(n) / √( p (1 - p) (1/n1 + 1/n2) ) ) + P( Z < -Z0.025 - 0.04√(n) / √( p (1 - p) (1/n1 + 1/n2) ) )

where Z0.025 is the upper 0.025 quantile of the standard normal distribution, which is approximately 1.96.

We can estimate the pooled sample proportion as:

p = (x1 + x2) / (n1 + n2) = (15 + 8) / (300 + 300) = 0.0433

Substituting the values, we have:

1 - β = P( Z > 1.96 - 0.04√(300) / √(0.0433(1 - 0.0433)(1/300 + 1/300))) + P( Z < -1.96 - 0.04√(300) / √(0.0433(1 - 0.0433)(1/300 + 1/300)))

Solving this equation using statistical software or a calculator, we obtain 1 - β = 0.684.

Therefore, with the given sample sizes, the power of the test for the two-sided alternative hypothesis H1: p1 ≠ p2 is 0.684 when the significance level is 0.05 and the effect size is 0.04.

Moving on to part (b) of the question, we need to determine the sample size needed to detect the difference with a probability of at least 0.9 and a significance level of 0.05..

Substituting the values, we have:

n = (Z0.025 + Z0.90)² * (0.0433 * 0.9567 / 0.04²) ≈ 715.27 or 716

To know more about hypothesis here

https://brainly.com/question/29576929

#SPJ4

The answers are as follows:

-e^(3x/4)i = -cos(3x/4) - i sin(3x/4)

e^xi = cos(x) + i sin(x)

Sie^(-π/3)i = -sin(π/3) + i cos(π/3)

Euler's formula is a fundamental mathematical relationship that connects the exponential function, trigonometric functions, and imaginary numbers. It is expressed as e^(ix) = cos(x) + i sin(x), where e is the base of the natural logarithm, i is the imaginary unit (√-1), cos(x) represents the cosine function, and sin(x) represents the sine function.

To express a complex number in the form a + bi using Euler's formula, we need to identify the real and imaginary parts of the number.

1. For -e^(3x/4)i:

2. For e^(xi):

3. For Sie^(-π/3)i:

In each case, we can express the complex number in the form a + bi, where a represents the real part and b represents the imaginary part. The angle x in the formulas can be any real number, and the resulting expressions give us the corresponding values of cosine and sine at that angle, allowing us to represent complex numbers using trigonometric functions.

To learn more about Euler's formula, click here: brainly.com/question/12274716

#SPJ11

The area of the region between the graphs y^2 = 8x and x^2 = 8y is (64/3 - 64) square units.

The area (a) of the region between the graphs of the equations y^2 = 8x and x^2 = 8y can be determined by finding the points of intersection and evaluating the definite integral of the difference in the y-coordinates.

To find the points of intersection, we set the two equations equal to each other: y^2 = 8x and x^2 = 8y. Solving these equations, we find two points of intersection: (4, 4) and (0, 0).

Next, we can set up the definite integral to calculate the area between the curves. We integrate the difference in the y-coordinates from y = 0 to y = 4 (the y-values of the intersection points). The integral expression for the area is: a = ∫[0 to 4] (y2 - x2) dy.

To simplify the integral, we need to express x in terms of y. From the equation x^2 = 8y, we get x = √(8y). Substituting this expression into the integral, we have a = ∫[0 to 4] (y2 - 8y) dy.

Evaluating the integral, we get a = [(y^3)/3 - 4y^2] evaluated from 0 to 4. Plugging in these limits, we find a = (64/3 - 64) - (0 - 0) = 64/3 - 64.

Therefore, the area of the region between the graphs y^2 = 8x and x^2 = 8y is (64/3 - 64) square units.

Learn more about area here:

https://brainly.com/question/1631786

#SPJ11

Jane Doe's take-home pay after taxes in 2017 was $39,340.00.

Take-home pay means the net amount of income received after the deduction of taxes, benefits and voluntary contributions from a paycheck.

We must consider these values from W2 form:

Social Security tax = 6.2% * $50,000.00

Social Security tax = $3,100.00

Medicare tax = 1.45% * $50,000.00

Medicare tax = $725.00

Gross wages - (Federal income tax + Social Security tax + Medicare tax) = Take-home pay

$50,000.00 - ($6,835.00 + $3,100.00 + $725.00) = Take-home pay

$50,000.00 - $10,660.00 = Take-home pay

$39,340.00 = Take-home pay

Take-home pay = $39,340.00.

Read more about take-home pay

brainly.com/question/957794

#SPJ1

The proportion of time the machine is down due to a type 1 failure is given by p × (μ1 / (λ + μ1)), where p is the probability of a type 1 failure occurring, μ1 is the rate of type 1 repair time, and λ is the rate of the machine's failure time.

To calculate the proportion of time the machine is down due to a type 1 failure, we need to consider the probability of a type 1 failure occurring and the expected time it takes to repair the machine for a type 1 failure. Similarly, for the proportion of time the machine is down due to a type 2 failure, we consider the probability of a type 2 failure occurring and the expected time it takes to repair the machine for a type 2 failure.

Let T be the total time it takes for the machine to fail and be repaired. The proportion of time the machine is down due to a type 1 failure is given by p × (μ1 / (λ + μ1)) since the probability of a type 1 failure occurring is p and the expected repair time for a type 1 failure is 1 / μ1. Similarly, the proportion of time the machine is down due to a type 2 failure is given by (1 - p) × (μ2 / (λ + μ2)) where (1 - p) is the probability of a type 2 failure occurring and 1 / μ2 is the expected repair time for a type 2 failure.

The proportion of time the machine is up can be calculated by subtracting the sum of the proportions of time it is down due to type 1 and type 2 failures from 1. Therefore, the proportion of time the machine is up is given by 1 - (p × (μ1 / (λ + μ1)) + (1 - p) × (μ2 / (λ + μ2))).

Learn more about proportion here:

https://brainly.com/question/31548894

#SPJ11

(a) The number of standard deviations below the null value for x = 72.3 is approximately -1.21.

(b) Using α = 0.005, the conclusion is to reject the null hypothesis since the test statistic falls in the critical region. The test statistic is approximately -2.15, and the p-value is approximately 0.0161.

(a) To find the number of standard deviations below the null value for x = 72.3, we subtract the null value (73) from the observed value (72.3) and divide by the standard deviation (6). This gives us (-0.7) / 6 = -0.1167, which can be rounded to -1.21.

(b) To test the hypothesis with α = 0.005 and x = 72.3, we calculate the test statistic. The test statistic is given by (x - μ) / (σ / √n), where x is the sample mean, μ is the null value, σ is the standard deviation, and n is the sample size. Plugging in the values, we get (-0.7) / (6 / √25) = -2.15 (rounded to two decimal places).

Next, we determine the p-value associated with the test statistic. Since the alternative hypothesis is one-sided (Ha: μ < 73), we look up the p-value for -2.15 in the t-distribution with n-1 degrees of freedom. The p-value is approximately 0.0161 (rounded to four decimal places).

(c) For the test procedure with α = 0.005, we want to find the critical value at which the test statistic corresponds to a probability of α in the left tail of the t-distribution. We look up the critical value for α = 0.005 in the t-distribution with n-1 degrees of freedom. Let's denote this critical value as c. Then, we can find c such that P(T < c) = α, where T is a random variable following a t-distribution with n-1 degrees of freedom.

(d) To ensure that P(T < c) = 0.01 when α = 0.005, we need to find the sample size n. We can use the t-distribution and the critical value c from part (c) to solve for n. The equation becomes P(T < c) = 0.01 = α. By looking up the critical value c in the t-distribution table and solving the equation, we can find the required sample size n.

(e) If a level 0.01 test is used with n = 100, we want to find the probability of a Type I error when the true population mean is μ = 76. The probability of a Type I error is equal to the significance level (α) of the test. In this case, α = 0.01. Therefore, the probability of a Type I error is 0.01.

Learn more about standard deviations

brainly.com/question/29115611

#SPJ1

To prove that H(n) = n!(1/1! + 1/2! + 1/3! + ... + 1/n!) for all n ≥ 1 using induction, we need to follow the steps you've outlined.

Base Case:

For n = 1, we have H(1) = 1·H(0) + 1. Plugging in H(0) = 0 and simplifying, we get H(1) = 1·0 + 1 = 1. On the other hand, f(1) = 1!(1/1!) = 1(1) = 1. The base case holds true.

Inductive Hypothesis:

Assume that for some k > 1, H(k-1) = (1/1! + 1/2! + 1/3! + ... + 1/(k-1)!). This is our inductive hypothesis.

Inductive Step:

Using the recurrence relation, we have H(k) = k·H(k-1) + 1. Plugging in our inductive hypothesis, we get:

H(k) = k(1/1! + 1/2! + 1/3! + ... + 1/(k-1)!) + 1.

To simplify further, we can write k as k!/k!:

H(k) = k!/k! (1/1! + 1/2! + 1/3! + ... + 1/(k-1)!) + 1.

Rearranging the terms, we get:

H(k) = (1/1! + 1/2! + 1/3! + ... + 1/(k-1)!) + k!/k!.

This expression is equal to f(k), which is n!(1/1! + 1/2! + 1/3! + ... + 1/n!). Therefore, we have shown that H(k) = f(k) for the inductive step.

By induction, we have proved that H(n) = n!(1/1! + 1/2! + 1/3! + ... + 1/n!) for all n ≥ 1.

Note: It's important to clarify that H(0) should be explicitly defined as H(0) = 0 in the recurrence relation to ensure that the base case is consistent.

Learn more about recurrence : brainly.com/question/30479680

#SPJ11

we are 95% confident that the true mean difference between the amount of mail-order purchases and the amount of internet purchases lies between -$23.09 and $9.29.

Step 1: Find the critical value that should be used in constructing the confidence interval.

Since the sample sizes are small (n1=9, n2=13), we will use the t-distribution for the interval estimate. The degrees of freedom is calculated using the formula:

df = [(s1^2/n1 + s2^2/n2)^2] / [((s1^2/n1)^2)/(n1 - 1) + ((s2^2/n2)^2)/(n2 - 1)]

Plugging in the values gives:

df = [(27.75^2/9 + 25.75^2/13)^2] / [((27.75^2/9)^2)/(9 - 1) + ((25.75^2/13)^2)/(13 - 1)] ≈ 17.447

Using a t-table with 17 degrees of freedom and a confidence level of 95%, we find the critical value to be 2.110.

Step 2: Calculate the point estimate of the difference between the means.

The point estimate of the difference between the means is:

1x - x2 = $72.10 - $79.00 = -$6.90

Step 3: Calculate the confidence interval.

The formula for the confidence interval for the difference between two population means is:

(1x - x2) ± tα/2 * sqrt[s1^2/n1 + s2^2/n2]

Plugging in the values gives:

(-$6.90) ± 2.110 * sqrt[27.75^2/9 + 25.75^2/13] ≈ (-$23.09, $9.29)

Therefore, we are 95% confident that the true mean difference between the amount of mail-order purchases and the amount of internet purchases lies between -$23.09 and $9.29.

To  learn  more about amount click here:brainly.com/question/30690010

#SPJ11

The original price was $125, the discount was $43.75, and the sale price was $81.25.

We can find the discount as follows: To find the discount: Discount = Original Price - Sale Price Discount = $125 - $81.25

Discount = $43.75Therefore, the discount is $43.75

We can now find the selling price as follows: Selling Price = Original Price - Discount Selling Price = $125 - $43.75Selling Price = $81.25Therefore, the selling price is $81.25. To summarize: Original Price: $125Discount: $43.75Sale Price: $81.25The original price was $125, the discount was $43.75, and the sale price was $81.25.

To know more about Sale Price visit:

https://brainly.com/question/31104614

#SPJ11

The probability of getting exactly 4 aces and 3 kings is 0.000277 or approximately 0.0277%.

To find the probability of getting exactly 4 aces and 3 kings, we need to find the total number of ways to select these cards from a deck of 52 cards.

First, we need to find the total number of ways to select 13 cards from 52. This is given by the combination formula:

C(52, 13) = 52! / (13! * 39!) = 635,013,559,600

Next, we need to find the number of ways to select 4 aces and 3 kings from the deck. The number of ways to select 4 aces from the 4 available is C(4, 4) = 1. Similarly, the number of ways to select 3 kings from the 4 available is C(4, 3) = 4.

The remaining 6 cards can be selected from the remaining 44 cards in C(44, 6) ways.

Therefore, the total number of ways to select 4 aces and 3 kings in 13 cards is:

C(4, 4) * C(4, 3) * C(44, 6) = 1 * 4 * 44,049 = 176,196

Finally, we can find the probability of getting exactly 4 aces and 3 kings by dividing the number of ways to select these cards by the total number of ways to select any 13 cards from a deck:

P(exactly 4 aces and 3 kings) = 176,196 / 635,013,559,600 = 0.000277 or approximately 0.0277%.

To know more about probability, refer to the link below:

https://brainly.com/question/31955902#

#SPJ11

The yield on Josef's investment in Dowc Beverage Co. is 2.08% higher for the bonds than it is for the stocks. Thus, the correct option is D.

Yield is the return on an investment over a specified period. It is often represented as a percentage of the investment's cost.

The rate of return on investment or interest earned on a security, usually expressed annually, is referred to as yield.

A dividend is a payment made by a corporation to its shareholders, usually in the form of cash or stock, to share the company's profits.

A commission is a payment made to an individual or company for services rendered.

A broker commission, also known as a brokerage fee, is the fee charged by a broker for services such as buying and selling shares on behalf of clients.

To know more about shareholders, visit:

https://brainly.com/question/28170754

#SPJ11

Betty will have 10 bracelets of blue shiny round stones.

Given the following:

Betty brought 140 shiny blue round stones which cost 8 dollars.

We have a total of 140 blue round stones.There are 14 pieces of stones in each bracelet, so we will divide the total number of stones by the number of stones per bracelet to determine the number of bracelets.

There are 140 / 14 = 10 bracelets made from blue shiny round stones.

Therefore, there will be 10 bracelets of blue shiny round stones.

In conclusion, there will be 10 bracelets of blue shiny round stones with the given details.

Know more about bracelets  here,

https://brainly.com/question/16898240

#SPJ11

To find the inverse of the function f(x) = 3√(6x), we can follow these steps:

Step 1: Replace f(x) with y: y = 3√(6x).

Step 2: Swap the variables x and y: x = 3√(6y).

Step 3: Solve for y in terms of x. To do this, we'll isolate the radical term:

x = 3√(6y)

x/3 = √(6y)

(x/3)^2 = 6y

(x^2)/9 = 6y

y = (x^2)/54

Step 4: Replace y with ƒ^(-1)(x): ƒ^(-1)(x) = (x^2)/54.

Therefore, the inverse function of f(x) = 3√(6x) is ƒ^(-1)(x) = (x^2)/54.[tex][/tex]

Let's call the vector V. We know that the magnitude of V is 3 and that its direction is 25 degrees counterclockwise from the positive x-axis.

To write V in component form, we need to determine its x- and y-components. We can use trigonometry to do this.

The x-component of V is given by Vx = V cos θ, where θ is the angle between V and the positive x-axis. We can use the fact that the direction of V is 25 degrees counterclockwise from the positive x-axis to find θ:

θ = 360 degrees - 25 degrees = 335 degrees

(Note that we add 360 degrees to 25 degrees to get an angle in the fourth quadrant, and then subtract 25 degrees to get the actual angle between V and the positive x-axis.)

Now we can use the formula Vx = V cos θ:

Vx = 3 cos 335 degrees

To evaluate this expression, we need to convert the angle to radians:

335 degrees * (π/180) = 5.85 radians

Now we can substitute and simplify:

Vx = 3 cos 5.85 ≈ -2.52

(Note that Vx is negative because the angle between V and the positive x-axis is in the fourth quadrant.)

The y-component of V is given by Vy = V sin θ. We can use the same value of θ that we found earlier:

Vy = 3 sin 335 degrees

Converting to radians:

335 degrees * (π/180) = 5.85 radians

Substituting and simplifying:

Vy = 3 sin 5.85 ≈ -0.88

Therefore, the vector V in component form is:

V = (-2.52, -0.88)

To learn more about vector in component form refer below

https://brainly.com/question/25737181

#SPJ11

To solve this problem, we need to subtract the depth at which the dolphin is located from the sea level.What is a depth?Depth refers to the distance from the surface to the bottom of a body of water or any other object.

To put it another way, depth is a measurement of distance from the surface of something downward or inward.For example, when an object, say a Dolphin, is at a depth of 45 3/4 feet relative to sea level, how many feet has it descended from sea level?We must perform the following calculation to get our answer:45 3/4 feetSo, the dolphin has descended 45 3/4 feet from sea level.

To know more about distance, visit:

https://brainly.com/question/13034462

#SPJ11

The actual diameter of the gazebo is 16.8 feet and the area of the circular gazebo is approximately 221.71 square feet.

According to the given scale, 2 inches on the blueprint represents 6 feet in reality. Thus, to find the actual diameter of the gazebo, we can set up a proportion:

2 inches / 6 feet = 5.6 inches / x feet

Cross-multiplying, we get:

2 inches * x feet = 6 feet * 5.6 inches

x = (6 feet * 5.6 inches) / 2 inches

x = 16.8 feet

To find the area of the gazebo, we can use the formula for the area of a circle:

Area = πr²

Since the diameter is given, we can find the radius by dividing it by 2:

r = 16.8 feet / 2

r = 8.4 feet

Substituting the radius value into the formula for the area, we get:

Area = π(8.4 feet)²

Area ≈ 221.71 square feet

To learn more about scale click on,

https://brainly.com/question/30474672

#SPJ1

Complete question is:

The blueprint for a circular gazebo has a scale of 2 inches = 6 feet. The blueprint shows that the gazebo has a diameter of 5.6 inches. What is the actual diameter of the​ gazebo? What is its​ area? Use 3.14 for π.