can you suggest improvement that can be made towards the design of siphon so that the transfer of liquid is much higher.​

Answer:

Explanation

one is a galaxy and one is a Star.

Answer:

Explanation:

Scalar is the measurement of a unit strictly in magnitude. Vector is a measurement that refers to both the magnitude of the unit and the direction of the movement the unit has taken. In other words, scalar quantity has magnitude, such as size or length, but no particular direction. When it does have a particular direction, it's a vector quantity.

The speed of the ball that the ball player throw is 16.66 m/s.

The ball player throws a ball vertically upward and then catches the ball. It means, the ball doing vertical motion travel upward to the highest point and then goes down until the ball player catches it. The trajectory of the ball as it goes up is symmetrical to the trajectory of the ball as it goes down.

travel time = travel time upward + travel time downward

t = t₁ + t₂

3.40 = t₁ + t₁

3.40 = 2t₁

t₁ = 3.40 ÷ 2

t₁ = 1.70 s

When the ball travels upward, non-uniform motion applies

v₂ = v₁ + at

v₂ = v₁ + at₁

0 = v₁ + (- 9.8 × 1.70)

0 = v₁ - 16.66

v₁ = 16.66 m/s

Learn more about vertical motion here: https://brainly.com/question/27526920

#SPJ4

Mutations may alter the structure of a protein, may be neutral, may be dangerous, or may be advantageous.

A mutation is a change to an organism's DNA sequence. Viral infection, mistakes in DNA replication during cell division, and exposure to mutagens can all lead to mutations. Gametes experience germline mutations. Other bodily cells are susceptible to somatic mutations. Chromosome alterations are mutations that change the structure of a chromosome. A single nucleotide is altered by point mutations. Depending on the situation or place, the impacts of mutation could be beneficial, negative, or neutral. The majority of non-neutral mutations are harmful. The impact and likelihood that a mutation will occur increase with each extra base pair that it modifies.

To know more about mutation on

https://brainly.com/question/6592395

The cost of using 50 W for one day or 24 hours is  dollar 0.12. The cost of using 800 W for 1 hour is 0.08 dollar.

Power is the rate of work done energy of  an object. Given that the cost of using 1 KWhr energy is dollar 0.10.

Then cost of using 50 W  or 0.05 KW in 24 hours is

0.05 × 24 ×  0.10  = 0.12 dollar

Cost of using 800 W or 0.08 KW per hour is 0.08 KWhr × 0.10 = dollar 0.08

Similarly, the cost of using 150 W in one month is find as follows:

150 W = 0.15 KW

energy used  = 0.15 × 30 × 24 hrs

cost = 0.15 × 30 × 24 hrs × 0.10 = dollar 10.8

The energy causing a cost of 2.5 dollar is 2.5/0.10 = 25 KWhr

power = 25 KWHr/24 hrs = 1.04 KW.

The energy causing a cost of 4 dollars is 4/0.10 = 40 KWhr

power =40 KWHr/24 hrs = 1.6 KW.

The energy causing the cost of 3 dollars  = 3/0.10 = 30 KWhr

then time = 30/100 W = 0.3 hr.

Find more on power;

https://brainly.com/question/3854047

#SPJ1

The books' final speed is 4 m/s, their rate of acceleration is 0.8 m/s2, and their net force is 3.2 m/s2.

The vectorial expression of velocity is the movement in space-time of an object or particle. The recognised unit of velocity magnitude is the metre per second (m/s) (also known as speed). The rate of speed can also be expressed in centimetres per second (cm/s). The pace at which an object's location changes as seen from a certain angle and as stated by a specific time unit (for example, 60 km/h northbound) is measured by its velocity, which is the direction in which it is travelling.

As a physical vector quantity, velocity must have a specified magnitude and direction. Speed is a coherent derived unit whose quantity is measured in metres per second (m/s or ms1) in the SI. Speed is the scalar absolute value (magnitude) of velocity (metric system). A vector is "5 metres per second east."

= ∆/∆

v=20/5 v=4

Therefore the final velocity of the book is 4m/s.

Acceleration= v/t

=4/5

=0.8m/s2

Thus acceleration of book is 0.8m/s2

F=0.8*4

F=3.2m/s2

Net force is 3.2m/s2

To know more about Velocity visit:

https://brainly.com/question/18084516

#SPJ1

The kinematic equation of motion used to find the time, velocity, and acceleration of the motion in the questions are as follows;

8. The time it takes the runner to get to full speed is 5 seconds

9. The acceleration is 166.[tex]\overline{6}[/tex] m/s²

10. The initial velocity is 550 m/s

11. It takes the sketer 8 seconds

12. The acceleration of the fan is -6·π rad/s²

13. The speed with which the zebra hits the ground is 98 m/s

14. The acceleration of the school bus is -100 m/s²

15. 5 seconds ago the velocity of the jet was 4250 m/s

The kinematic equations of motion are;

v = u + a·t

s = u·t + (1/2)·a·t²

v = u + 2·a·s

Where;

v = The final velocity

u = The initial velocity

s = The distance

t = The time of the motion

a = The acceleration

8. The runner's rate of acceleration = 2 m/s²

The runner's top speed = 10 m/s

The required kinematic equation is; t = (v - u)/a

Where;

t = The time duration

a = The acceleration = 2 m/s²

v = The final velocity = The runner's top speed = 10 m/s

u = The initial velocity of the motion = 0 (assumption that the runner starts from rest)

Therefore;

t = (10 - 0)/2 = 5

9. The speed of the bullet when it hits the bystander, v = 250m/s

The time at which the bullet was shot out of the high powered rifle, t = 1.5 seconds

The initial velocity of the bullet, u = 0m/s (The bullet is initially at rest in the gun)

The acceleration, a = (v - u)/t

Acceleration = (250 - 0)/1.5 = 166.[tex]\overline{6}[/tex]

10. The acceleration of the person as he falls, a = 10 m/s²

The speed at which the person was travelling as he hits the ground, v = 600 m/s

Time after which the person hits the ground, t = 5 seconds

v = u + a·t
u = v - a·t

Therefore; u = 600 - 10 × 5 = 550

11. The acceleration rate, a = 2 m/s²

Initial velocity, u = -6m/s

Final velocity, v = 10m/s

t = (10 - (-6))/2 = 8

12. The initial angular velocity of the fan, ω₁ = 9 rev/sec

1 rev = 2·π rad, therefore;

ω₁ = 2·π × 9 rad/s = 18·π rad/s

The time after which the fan stops, Δt = 3 seconds

The final angular velocity of the fan, ω₂ = 0

The angular acceleration of the fan, α = (ω₂ - ω₁)/Δt

Therefore; α = (0 - 18·π)/3 = -6·π

13. The time it takes the zebra to hit the ground = 10 seconds

The acceleration due to gravity, g = 9.8 m/s²

The initial velocity of the zebra, u = 0 m/s

Therefore;

The velocity with which the zebra hits the ground, v = 9.8 × 10 = 98

The zebra hits the ground moving at 98 m/s

14. Initial speed of the school bus, u = 50 m/s

The time it takes the school bus to come to rest = 0.5 seconds

The acceleration. a = (0 m/s - 50 m/s)/(0.5 s)) = -100 m/s²

15. The acceleration of the jet = 150 m/s²

Current velocity of the jet = 5000 m/s

The initial speed of the jet, u, 5 seconds ago is therefore;

u = 5000 - 150 × 5 = 4250

The initial speed of the jet 5 seconds ago is 4250 m/s

Learn more about the kinematic equations of motion here: https://brainly.com/question/14356122

#SPJ1

P = m g v is the essential formula for power. Power therefore follows velocity (v).

The amount of effort finished in a specific length of time is a definition of power. The SI power measurement is the wattage (W), that is derived from watts per square meter per second (J/s). Horsepower (hp) is a measuring unit sometimes used to express the power of automobiles and other equipment. It is roughly comparable to 745.7 watts.

The link among work and time is what is known as power.

P = W / t

In the case of a drop descending, the applied load and the displacement have the same direction, hence the angle in between them is negative and the cosine of zero is only one (cos 0 = 1). The work is defined as the product rule of the force and also the displacement.

W = F y

The relationship between the gravitational force and the drop's mass is F = mg.

W = mg y

we substitute

P = m g y / t

terminal velocity of the drop is constant

P = m g v

To know more about Gravitational force visit:

https://brainly.com/question/12528243

#SPJ4

According to the given statement 2.5 m/s is the final velocity of the truck.

Velocity is the pace and path of an item's movement, whereas speed is really the time rate that a object is travelling along a route. In other words, velocity is a vector, whereas speed is a scalar number. as the pace of a car driving south on a highway or the pace at which a rocket takes off.

Collision energy equals collision energy before collision

Afterward, we would have;

(400 * 20) + (50 * 2) = (50 * 142) + (400 * v)

8000 + 100 = 7100 + 400v

8100 - 7100 = 400v

v = 1000/400

v = 2.5 m/s

According to our estimation, the velocity is 2.5 m/s.

To know more about Velocity visit:

https://brainly.com/question/28738284

#SPJ1

According to the given statement 2.5 m/s is the final velocity of the truck.

Velocity is the pace and path of an item's movement, whereas speed is really the time rate that a object is travelling along a route. In other words, velocity is a vector, whereas speed is a scalar number. as the pace of a car driving south on a highway or the pace at which a rocket takes off.

Collision energy equals collision energy before collision

Afterward, we would have;

(400 * 20) + (50 * 2) = (50 * 142) + (400 * v)

8000 + 100 = 7100 + 400v

8100 - 7100 = 400v

v = 1000/400

v = 2.5 m/s

According to our estimation, the velocity is 2.5 m/s.

To know more about Velocity visit:

brainly.com/question/28738284

#SPJ1

The Kinetic energy will be 19663 J that is approximately 2.0 × 10³ J option B.

An object or particle has kinetic energy because of its motion. When an item undergoes work—the transfer of energy—by being subjected to a net force, it accelerates and acquires kinetic energy. It's SI unit is Joules.

Given, mass of the car, m = 1400 kg

velocity of the car= 5.3 m/s

by applying the formula ,Kinetic Energy = 1/2×mass×velocity²

K.E. = 1/2×1400×(5.3)²

K.E = 700×28.09

K.E. =  19663 J ≈ 2.0 × 10³ J

The Kinetic energy will be 19663 J that is approximately 2.0 × 10³ J.

To know more about Energy visit :-

https://brainly.com/question/26472013

#SPJ1

Velocity is a physical vector quantity that is defined by magnitude and direction. A coherent derived unit called speed is used to indicate the magnitude or absolute value (scalar) of velocity. In the SI, its value is represented in meters per second (m/s or m/s1) (metric system).

When an object is traveling, its velocity is the direction it is travelling in to indicate how quickly the object's location is changing as seen from a particular point of view and as measured by a certain unit of time, such as 60 km/h in a northerly direction. The idea of velocity serves as a key building component in kinematics, the branch of classical mechanics that analyzes how bodies move.

The velocity of a wave can be calculated using the wavelength (λ) and frequency (f) of the wave using the formula:

Velocity = wavelength x frequency

For the tsunami wave:

Velocity = 160,000 m x .0014 Hz = 224 m/s

For the wind-driven wave:

Velocity = 150 m x 0.083 Hz = 12.45 m/s

So the velocity of the tsunami wave is 224 m/s and the velocity of the wind-driven wave is 12.45 m/s.

To know more about velocity visit:

https://brainly.com/question/18084516

#SPJ1

Answer: The force between the two asteroids is 2.25 x 10^-5 N. ✅

PLEASEEEE GIVE BRANLIEST

Explanation:

The force between two objects in space can be calculated using the formula:

F = G * (m1 * m2) / r^2

Where:

F = force between the two objects

G = gravitational constant (6.67 x 10^-11 Nm^2/kg^2)

m1 = mass of object 1

m2 = mass of object 2

r = distance between the two objects

So, in this case:

F = 6.67 x 10^-11 Nm^2/kg^2 * (34000 kg * 15000 kg) / (67000 m)^2

To calculate the force between the two asteroids, we need to substitute the values for m1, m2, and r into the formula.

F = 6.67 x 10^-11 Nm^2/kg^2 * (34000 kg * 15000 kg) / (67000 m)^2

F = (2.25 x 10^-5 N)

So the force between the two asteroids is 2.25 x 10^-5 N.

A single raindrop illuminated by sunshine disperses the white light into seven colors spectrum.

A white sunlight consists of seven different color components. These color components have different wavelength. The speed of different components is different when they passes through an optically denser medium(e.g.: prism). So each color component gets bent by a certain amount thus causing dispersion.

A raindrop acts like a prism for the sunshine. When a light ray passes through a rain drop, it splits into seven color component which is known as the dispersion of light.  

To know more about wavelength, here

https://brainly.com/question/13533093

#SPJ4

On the moon you weigh 6 times lighter so for this problem you multiply 140n by 6.

Your weight on the Moon is 16.5% what you would experience on Earth. In other words, if you weighed 100 kg on Earth, you would weigh a mere 16.5 kg on the Moon. For you imperial folks, imagine you tipped the scales at 200 pounds.

It’s because of the lower gravity on the Moon. Objects on the surface of the Moon experience only 16.5% of the gravity they would experience on Earth.

The mass of the Moon is only 1.2% the mass of the Earth, so you might expect it to have only 1.2% of the gravity. But it’s only 27% of the size of the Earth, so when you’re standing on the surface of the Moon, you’re much closer to its center of gravity.

Therefore, On the moon you weigh 6 times lighter so for this problem you multiply 140n by 6.

To learn more about Gravity, refer to the link:

https://brainly.com/question/4014727

#SPJ1

The change in speed of the hockey pack is 10m/s.

Speed refers to the rate of motion or action, specifically the magnitude of the velocity; the rate distance is traversed in a given time.

The speed of an object can be calculated using the following formula:

F = m × (v/t)

where;

According to this question, a hockey puck (0.50 kg) is in contact with the stick for 0.2 seconds. If the force on the hockey puck is 25 N, the speed can be calculated as follows:

25 = 0.5 × (v/0.2)

25 = 2.5v

v = 10m/s

Therefore, 10m/s is the change in the speed of the hockey pack.

Learn more about speed at: https://brainly.com/question/13954313

#SPJ1

The time taken for the car to decelerate is 4.5 seconds.

option B.

The acceleration of the car is calculated from Newton's second law of motion as follows;

F = ma

a = F / m

a = ( 7500 ) / ( 2250 )

a = 3.33 m/s²

The time taken for the car to slow down is calculated as follows;

v = u + at

at = v - u

t = ( v - u ) / a

where;

t = ( 20 - 5 ) / 3.33

t = 4.5 seconds

Learn more about time of motion here: https://brainly.com/question/2364404

#SPJ1

Answer:

1. Net force= 6 N to left

2. Unbalanced

3. Both people must apply same magnitude of forces in opposite direction which causes net force to be 0.

Explanation:

Since both forces have opposite direction then we have to subtract the magnitude and consider the direction of vector that has greatest magnitude. In this case, the left side (13N) has more magnitude than the right side (7N). Hence:

[tex] \displaystyle{ \sum \vec F = 13 \: \text{N}- 7\: \text{N}= 6 \: \text{N to left}}[/tex]

The vector arrow of net force will point to left side with magnitude of 6 N.

Since the net force is not zero. This means that the force is not balanced as an object still changes its motion from resting to moving. A balanced force would mean the net force is zero and an object will always remain as same condition. This can be referred to first Newton's law of motion.

We can make the force balanced by having both people acting same magnitude of force in opposite direction. The equation must result in:

[tex] \displaystyle{ \left | \vec F \right | = \left| - \vec F \right| }[/tex]

Magnitude of forces must equal for both sides and also have to act in opposite direction which causes net force to be zero:

[tex] \displaystyle{ \sum \vec F = 0}[/tex]

The kinetic energy as it hits the ground with mass of 2kg and velocity 15m/s is found to be 225J

The energy a body has as a consequence of motion is known as kinetic energy. A force has to be applied to an object in order to propel it. We must put in effort in order to apply a force. After the work has been finished, energy is transferred to the item, which then travels at a new, constant speed.

At the bottom when ball hit ground with velocity = 15m/s

KE = 1/2 m v^2 => 1/2 x 2 x 15^2 => 225J

Potential energy is the energy that is kept in reserve in a system or object as a result of its orientation or configuration. An object's kinetic energy is measured in relation to stationary and moving items in its immediate surroundings. Potential energy is irrespective of an object's surroundings.

Learn more about kinetic energy here:

brainly.com/question/999862

#SPJ1

Answer:

F = 600 N

Explanation:

m = 200 kg

u = 0 m/s 3

v = 30 m/s

t = 10 s

a = v-u /t

  = 30 - 0 / 10

  = 30 / 10

  = 3 m/s²

F = m a

  =  200 × 3

  =  600 N

The rise in the water's temperature, given that 18200 joules was transferred to the 100.0 g of water is 43.5 °C

Heat transferred I related to temperature rise by the following formula:

Q = MCΔT

Where

With the above formula, we can determine the temperature rise as illustrated below.

The following data were obtained from the question:

Q = MCΔT

18200 = 100 × 4.184 × ΔT

18200 = 418.4 × ΔT

Divide both sides by 418.4

ΔT = 18200 / 418.4

ΔT = 43.5 °C

Thus, we can conclude from the above calculation that the temperature rise of the water is 43.5 °C

Learn more about temperature:

https://brainly.com/question/17107322

#SPJ1

It is also commonly abbreviated as ms−2. For example, if the velocity of a particle moving in a straight line changes uniformly (at a constant rate of change) from 2 m/s to 5 m/s over one second, then its constant acceleration is 3 m/s2.

To learn more about final speed refer to:

https://brainly.com/question/27086636

#SPJ1

Average speed = total distance covered/ total time taken

here on the graph y-axis is represented as distance and x-axis is showing time

So for the average speed of Train (line A)

total distance covered (d) = 1500 m

total time taken to reach that distance (t) = 150 s

so by a simple formula

For the average speed of  Car (line B)

Total distance covered (d) = 1500 m

total time taken to reach that distance (t) = 120 s

so by

For Maximum speed of roller- coaster (LineC)

So in the time between 70-80 seconds, it has the highest slop which shows the speed maximum at that time

In that 10 seconds, it covered 200 meters which shows its maximum speed which is

For the average speed of a Roller- coaster (line C)

Total distance covered (d) = 1300 m

total time taken to reach that distance (t) = 150 s

For the Train to Stoped at a station we can see from 40 seconds to 90 Seconds train has covered almost 0 distance which clearly shows that it was stopped which is 90-40= 50 seconds.

Learn more about Average Speed: https://brainly.com/question/4931057

The required work was done by the workman is 432 J.

Work is the energy exerted by an object as it applies a force to move another object over some distance. For a given amount of force, F, and a given distance, d, the work done on an object is given by the formula W=F⋅d .

We have,

Weight = Force due to gravity = -45j N

Total displacement = 22i + 9.6j Meter

Now,

Work done by gravity = -F.d = Work done by man

W = -45j(22i + 9.6j ) J

W =  -45( 9.6) = -432 J

Thus, work done by man is 432 J

To know more about work visit:

https://brainly.com/question/18094932

#SPJ4

The image of your face will be located 66.5 cm behind the front surface of the Christmas tree ball.

Surface is the outer layer of a physical object, such as a planet or a star. It is also the top layer of an object, such as the ground or a body of water. Surface can refer to the interface between two objects, such as the atmosphere and the ocean, or the interface between two materials, such as the air and the ground. The term can also refer to the top layer of a material, such as the skin of a human or the bark of a tree. In some cases, surface can refer to the way a material or object looks or feels, such as the smoothness of a rock or the texture of a fabric.

This is because of the principles of spherical mirrors; the image is located twice the distance behind the mirror as the object is in front of it. Therefore, the distance between your face and the image of your face is 58.0 cm (29.0 cm + 66.5 cm). The answer is expressed to two significant figures, and the appropriate units are included.

To know more about surface click-
https://brainly.com/question/29719172
#SPJ1

Due to the significant temperature gradient, jet streams are connected to fronts.

To know more about jet streams here

https://brainly.com/question/791542

#SPJ4

Better identification of novel species is made possible by categorization.

To learn more about organisms refer to:

https://brainly.com/question/10536731

#SPJ1

After a period, they start to collide with other galaxies, which causes them to become irregular galaxies. They eventually transform into ancient elliptical galaxies after exhausting all of their dust and gas to form new stars.

It is possible to think of irregular galaxies as star formation research labs. In contrast to the more well-known spiral galaxies, this kind of galaxy produces stars from an interstellar medium that has undergone less chemical evolution.

Typically, irregular galaxies are tiny, with a mass of only a tenth that of the Milky Way galaxy. They are vulnerable to environmental influences like colliding with massive galaxies and cosmic clouds because of their modest sizes.

To know more about Elliptical galaxies visit:

https://brainly.com/question/24985948

#SPJ1

The digestive organ that the majority of lipid digestion and absorption occur is the small intestine.

The small intestine is a part of the digestive system that is made up of the duodenum, jejunum, and ileum. It is the part of the digestive system that will follow the stomach.

This part of the intestine will be in charge mainly of the digestion of lipids, this process will begin in the mouth and in the stomach but then the digestion will take place in the small intestine with the help of lipase enzymes which will break the lipid molecules. After this process happens, the absorption of the lipids that will travel through circulation and go throughout the body will take place.

Therefore, we can confirm that the digestive organ that the majority of lipid digestion and absorption occur is the small intestine.

To learn more about small intestine visit: https://brainly.com/question/1751875

#SPJ1

25w = 100J/4s is the equation which rightly deciphers the relation of power, work and time.

Power is the rate at which work is performed or energy is delivered in accordance with  science and engineering. It can be represented as W/t, which refers to the product of the quantity of work finished (W) or energy converted (E) divided by the amount of time (t).

power (w) equals work (J)/time (s)

The energy that is generated when a force is imposed on a moving object is described as work. The work that a force would do on an item is directly proportional to the force multiplied by the displacement multiplied by the cosine of the angle between them. The SI unit of work and energy is denoted by the letter J.

Learn more about power here:

brainly.com/question/3854047

#SPJ4

Show that 25 W of power is required to give a brick 100 J of PE in a time of 4 s .

Elements are arranged in the periodic table based on various patterns. For example,  the element magnesium (Mg) A. has a higher atomic mass than the element sodium (Na). Option C is correct.

The known elements are arranged in the periodic table in increasing atomic number order and repeating chemical properties.

They are arranged in a tabular fashion, with each row denoting a certain era and each column denoting a particular group.

The elements are arranged in ascending atomic number sequence from top to bottom and left to right.

Elements belonging to the same group will have similar chemical properties because they will have the same valence electron configuration.

The periodic table's arrangement of elements follows a number of different patterns. For instance, sodium (Na) and magnesium (Mg) both have higher atomic masses (Na).

As a result, choice C is accurate.

Your question is incomplete but most probably your full question was Elements are arranged in the periodic table based on various patterns. For example, the element magnesium (Mg) has

a. a higher atomic mass than the element calcium (Ca).

b. has a lower atomic mass than the element beryllium (Be).

c. has a higher atomic mass than the element sodium (Na).

d. all of these

To learn more about periodic table, refer;

brainly.com/question/11155928

#SPJ4