Carla draws two rectangles.
One of the rectangles has an area of 35 square inches.
The other has a perimeter of 20 inches
Select the two rectangles that could be the rectangles Carla draws
A rectangle with a width of 2 inches and a length of 6 inches
A rectangle with a width of 2 inches and a length of 8 inches
A rectangle with a width of 4 inches and a length of 6 inches
A rectangle with a width of 5 inches and a length of 7 inches
A rectangle with a width of 6 inches and a length of 10 inches

The y-intercept of line is at (0, -6) and the domain is (-∞, ∞).

What is the linear system?

A linear system is one in which the parameter in the equation has a degree of one. It might have one, two, or even more variables..

Given,

The mathematical function has an absolute minimum at x = 15.

The average rate of change of the function between x = 20 and x = 25 is 0.

The mathematical function is increasing for all x such that 15 < x < 22.

The line intersects the y-axis at (0, -6). Then the y-intercept of the line is (0, -6).

The domain of the linear function will be a real number.

And the range of the linear function is also real number.

Hence , The y-intercept of line is at (0, -6) and the domain is (-∞, ∞).

To learn more about  linear system from the given link.

brainly.com/question/20379472

#SPJ1

We want to reduce x by 30%. Thus, the reduced price is:

x - 0.20x = 0.70x

More informally, if you take away 30%, you're left with 70%.

This question is similar to previous one so I used that answer launguage here also

Answer:

x = 67°

Step-by-step explanation:

When two parallel lines are cut by a transversal, the pair of angles formed on the interior of the parallel lines but on the opposite sides of the transversal are called alternate interior angles and they are congruent.

          x = 67°

The slope of a given line is m=1.5.

The slope of the line is the ratio of the rise to the run, or rise divided by the run. It describes the steepness of line in the coordinate plane.

The formula to find the slope of a line is slope = (y₂-y₁)/(x₂-x₁).

The coordinate points of a line are (1, -3) and (3, 0).

Substitute, (x₁, y₁) and (x₂, y₂) in m=(y₂-y₁)/(x₂-x₁), we get

m= (0+3)/(3-1)

= 3/2

= 1.5

Therefore, the slope of a given line is m=1.5.

To learn more about the slope of a line visit:

https://brainly.com/question/14511992.

#SPJ1

Answer:

[tex]16203[/tex] days

Step-by-step explanation:

There are 60 seconds per minute, so 3600 sec/hour, and 86400 seconds per day, so the answer is about [tex]16203[/tex] days.

The value of y will be 90 more than its value on the graph, when x = 11. The solution has been obtained using the linear equations.

What is a linear equation?

The equation is a linear equation that has the greatest degree of one. In a linear equation with an exponent greater than one, this indicates that there are no variables. A straight line is produced on the graph by this equation.

From the given information, we need to initially form the equation

We are given different points

Let us take two points as (3,270) and (4,360)

Using slope-intercept form, we get the equation as

⇒y=90x+0

⇒y=90x

Now, putting x=11, we get

y = 990

Hence, the value of y will be 90 more than its value on the graph, when x = 11.

Learn more about linear equation from the given link

https://brainly.com/question/30092358

#SPJ1

The indicated measures:

m∠ABC =  138° and m∠BCD = 52°.

According to the Angle Addition Postulate, an angle's measure is equal to the sum of the measures of any two adjacent angles. The Angle Addition Postulate can be used to determine the measurement of a missing angle or to determine the angle produced by two or more other angles.

Given:

The angle measures:

m∠DAE = 16° and m∠EDC = 64°.

The diagonals of the kite intersect at 90°.

(1).

In ΔAED,

the sum of all the angles of the triangle is 180°.

m∠DAE + m∠ADE + m∠AED = 180°

m∠ADE = 180 - 90 - 16

m∠ADE = 74°

According to the angle addition postulate,

m∠ADE + m∠EDC = m∠ADE

m∠ADE = (74 + 64)°

m∠ADE = 138°

From the property of kites,

m∠ADE = 138° =  m∠ABC.

(2).  m∠EBC =  m∠EDC,

m∠EBC = 64°

In ΔBCD,

the sum of all the angles of the triangle is 180°.

m∠DBC + m∠BCD + m∠CDB = 180°

m∠BCD = 180 - 64 - 64

m∠BCD = 52°

Therefore,  138° =  m∠ABC and m∠BCD = 52°.

To learn more about the angle addition postulate;

brainly.com/question/14957499

#SPJ1

Answer: The first orange is the best deal at $0.8 per orange. The second cand is the best deal at $0.45 per candy.

Step-by-step explanation:

First orange: 5 for $4 equals $4/5 per orange, which equals $0.8 per orange.

Second orange: 10 for $9 roughly equals $1.111 per orange

Third orange: $0.82 each

The first orange is the best deal at $0.8 per orange

First candy: 3 for $1.5 equals $1.5/3 per candy, which equals $0.5 per candy.

Second candy: 4 for $1.8 equals $0.45 per candy

Third candy, 10 for $4.6 equals $0.46 per candy

The value of the solution of (f.g)(t) is 2t^2-3t+7

A function is a type of rule that produces one output for a single input. Source of the image: Alex Federspiel. This is illustrated by the equation y=x2. Any input for x results in a single output for y. Considering that x is the input value, we would state that y is a function of x.

Types of Functions

Many – one function. Onto – function (Surjective Function) Into – function. Polynomial function

In the given equation,

f.g (t) is 2t^2-3t+7

To learn more about functions, click the following link:-

https://brainly.com/question/25638609

#SPJ1

In this polygon, all angles are right angles. The area of this polygon = 334 ft²

To calculate the area of a regular polygon, just apply the formula below: Half of a perimeter multiplied by apothem equals area. What it means is as follows: The perimeter is the sum of the lengths of all the sides. A segment known as an apothem joins the midpoint of any perpendicular side to the midpoint of a polygon.

The equation for the area of a regular polygon with n sides is [l2n]/[4tan(180/n)]. where n is the number of sides and l is the length of the sides of the polygon.

To calculate the area of a regular polygon, use the formula Area = (number of sides length of one side apothem)/2.

Given data :

Area of polygon

= Area AGEF + Area BCDG

= 21 x 7 + 17 x 11

= 147 + 187 = 334 ft²

Learn more about Area of polygon refer to :

brainly.com/question/20110859

#SPJ1

Answer:334 ft

Step-by-step explanation: i did the test

It will stand for the 15.1, not The 151.

So therefore here you got almost correct the answer,

but you misunderstood about the leaves because the leaves will stand for the decimal.

The 10th means that after the decimal,

So the foundation must be the 15.1.

15.4, 15.7, 16.5 16.6 17.8 18.3 18.6 and 18.6.

A stem and leaf diagram is a way of displaying a collection of numbers. The ‘stem’ consists of the first part of every number, usually the first digit(s) and the ‘leaf’ consists of the latter part of every number, usually the last digit. We need to know how to draw them and how to use them.

Draw a stem-and-leaf diagram to represent Scott’s data.

Step 1: Figure out what our key will be. The stem will be the first two digits, whilst the leaf will be the last digit. Our key is any number that is in the list, represented in terms of a stem and leaf.

Step 2: Use our key to draw our stem part of the diagram, which will have to include: 15,16,17,18,

Step 3: Rewrite the data in numerical order.

151, 154, 154, 157, 165, 166, 178, 183, 186, 186

Step 4: Fill in the ‘leaf’ values (the last digit of every value) alongside the correct ‘stem’ value, to complete the stem and leaf diagram.

14 15 1447 16 56 17 8 18 366

14  

15       1447

16       56

17        8

18       366

151 , 154 , 154 , 157

165 , 166

178

183 , 186 ,186

it will stand for the 15.1, not The 151. So therefore here you got almost correct the answer, but you misunderstood about the leaves because the leaves will stand for the decimal. The 10th means that after the decimal, So the foundation must be the 15.1, 15.4, 15.7, 16.5 16.6 17.8 18.3 18.6 and 18.6.

To know more about stem and leaf diagram visit brainly.com/question/17886846

#SPJ4

The sum of all a triangle's sides' lengths is the formula for calculating a triangle's perimeter.

The whole length of a shape's boundary is referred to in geometry as the perimeter of the shape. By multiplying the lengths of all the sides and edges that surround an object, the perimeter may be calculated. It is measured in measures of length that are linear, such as centimeters, meters, inches, or feet.

The sum of all a triangle's sides' lengths is the formula for calculating a triangle's perimeter.

Add the sides' lengths to find a triangle's perimeter. As an illustration, the perimeter of a triangle with sides a, b, and c is given by P = a + b + c.

To learn more about perimeter refer to:

https://brainly.com/question/19819849

#SPJ1

The power series representation for f(x) = arccot(x) is

      [tex]\pi /2- \lim_{n \to \infty} (-1)^n\frac{x^2^n^+^1}{2n+1}[/tex]

The power series ∑aₙxⁿ is an infinite series and looks like a function of x. An easy way to illustrate the idea of a power series representing a function is to use the geometric series as an example.

The power series is a very important kind of infinite series where the terms contain the powers of a variable. A power series is a series of the general form:

∑aₙ(x-x₀)ⁿ=a₀+a₁(x-x₀)+a₂(x-x₀)²+a₃(x-x₀)³+.........

called a power series centered at x₀

where  x is a variable,

x₀ is a real constant, and the

aₙ's are real constants called the coefficients of the series.

The given power series representation is f(x) = arccot(x).

we observe that f '(x)=-1/(1+x²) and find the required series by integrating the power series for -1(1+x²)

arccot(x)=∫-1/(1+x²)dx

⇒∫-(1-x²+x⁴-x⁶+....)dx

⇒C-x+1/3x³-x⁵/5+1/7x⁷-......

To find C we put x=0 and obtain C=arccot(0)=π/2

Therefore,

C=π/2-x+1/3x³-x⁵/5+1/7x⁷-.......

f(x)=π/2- ∑(-1)ⁿₓ x^2n+1/2n+1

To know more about power series representation:

https://brainly.com/question/28158010

#SPJ4

Answer:

x=2

Step-by-step explanation:

4x + 2(x - 4) is equivalent to x +2

first, distribute. 4x+2x-8

next, combine like terms. 6x-8

6x-8 = x+2

we need to group all the variable terms on one side, and all the constant terms on the other side of the equation. (6x-8)+(8-x)=(x+2)+(8-x)

get rid of the parenthesis. 6x-8+8-x=x+2+8-x

combine like terms. 6x-x-8+8=x-x+2+8

solve. 5x=10

divide both by 5. 5x/5=10/5

x=2

The result of running the code is that x will be 20.

Therefore, your software is saying:

Place x at 30. (I'm assuming that you don't care about the case here because you wrote an X in capital letters that don't exist anywhere else;)

Place y at 20.

If y is not equal to x-10, ask. "If yes, put x to the value of x-5; if no, set x to the value of y," is the next step.

Your question receives the response "no," and x is then set to the value of y since the values of x and y you selected to result in y being equal to x-10. The result of running the code is that x will be 20.

Know more about code

https://brainly.com/question/26134656

#SPJ4

Full question

After execution of the following code, what will be the value of x? X = 30; y = 20; if (y ! = (x - 10)) x = x - 5; else x = y;

Based on the image provided, the actual height of the structure would be 1/975.36.

This refers to a picture or model that is made based on the proportion of an original structure. Most models are smaller than their original.

According to the image, 1 centimeter represents 32 feet of the actual structure, which means there is a 1:32 scale factor, let's calculate then the number of centimeters in total to know the height:

1 foot = 30.48 cm

32 feet = x

x= 30.48 x 32/ 1 = 975.36 cm

Based on this the height can be expressed as  1/975.36.

Learn more about scale in https://brainly.com/question/1287267

#SPJ1

The range of the function is {0.01, 0.1, 1, 10, 100}. With an increase in the value of the domain, the range of the function is increasing.

What is a function?

A function from a set X to a set Y allocates exactly one element of Y to each element of X. The set X is known as the function's domain, while the set Y is known as the function's codomain.

Given function is

f(x) = 10^x.

Given domain is {-2, -1, 0, 1, 2}.

Now putting x = -2, -1, 0, 1, 2 in the function f(x) = 10^x.

When x = -2:

f(-2) = 10^(-2)

f(-2) = 0.01.

When x = -1:

f(-1) = 10^(-1)

f(-1) = 0.1.

When x = 0:

f(0) = 10^(0)

f(0) = 1.

When x = 1:

f(1) = 10^(1)

f(1) = 10

When x = 2:

f(2) = 10^(2)

f(2) = 100

The range of the function is {0.01, 0.1, 10, 100}

The values of the range increase with the increase of domain.

To learn more about range, click on the below link:

https://brainly.com/question/29019847

#SPJ1

A data set's attributes are enumerated through descriptive statistics. You can use inferential statistics to test a hypothesis or determine whether your data can be applied to a larger population.

Two sets of pupils with scores from various classes are highlighted, Using descriptive statistics, determine the mode of the following data: Using descriptive and inferential statistics, determine the z score for the given data.

Measurements of variability and measures of central tendency make up descriptive statistics (spread). Mean, median, and mode are examples of central tendency metrics. Variability measures include standard deviation, variance, minimum and maximum variables, kurtosis, and skewness.

correlation analysis, A set of independent variables and a dependent variable, such as Hypothesis Tests, are related in regression models. To compare entire populations or evaluate the correlations between variables, hypothesis testing is utilised along with samples and confidence intervals.

To learn more about statistics refer to:

brainly.com/question/4774586

#SPJ1

The complete question is " Identify the type of data​ (qualitative/quantitative) and the level of measurement for the

expenses of respondents in a survey?"

The number 1 is called a unit. It has no prime factors and is neither prime nor composite. The number is  6 and 42.

To learn more about  quantity refer to:

https://brainly.com/question/26044328

#SPJ1

One is referred to as a unit. It is neither prime nor composite and lacks any prime factors. The digits are 6 and 42.

A number's factors, and more specifically its prime factorization, can be expressed as factor trees. There are factors for each branch of the tree. The branch comes to an end and the number is circled once the factor at the branch's end is a prime number, leaving only itself and one as potential factors.

A factor tree is a technique that enables us to determine the prime factors of a given integer. With this approach, we factorize the inputted number until no further factors can be discovered. Prime factorization is the list of prime factors or numbers that we would multiply together to arrive at the given number.

Therefore, the correct answer is option a) 6 and 42.

To learn more about  factor tree refer to:

https://brainly.com/question/96551

#SPJ1

The solution to the indices is 50.

Index (indices) is the power or exponent which is raised to a number or a variable. The plural of index is indices. Indices contain constants and variables. The constant is a value which cannot be changed and a variable quantity can be assigned any number or its value can be changed.

Indices are a convenient tool in mathematics to correctly denote the process of taking a power or a root of a number. Taking a power is simply a case of repeated multiplication of a number with itself while taking a root is just equivalent to taking a fractional power of that same number.

8^1/3 / 5^-2

Applying the necessary laws of indices;

= 8^1/3 / 5^-2

= ∛8 / (1/5^2)

= 2 / (1/25)

= 2 x (25/1)

= 50

Learn more about indices here: https://brainly.com/question/170984

#SPJ1

A journal entry is a format used in accounting to record transactions. The amount we owe someone else that we must get in the future is known as notes receivable.

Notes receivable are claims for which official documents of credit, like promissory notes, are issued as proof of debt. In most cases, the credit instrument has a minimum term of 30 days and imposes an interest payment obligation on the debtor.

Given the following information:

Note receivable $15,000

Rate of interest 9%

Discount rate    12%

Period              2 months

Preparing journal entry to record accrued interest

To prepare the journal entry, we must first calculate the interest. We can compute interest by multiplying the notes receivable, the interest rate, and the period, i.e.

Interest = Notes receivable × Rate of interest × Period

Interest = 15000 × 0.09 × 2/12

Interest = 225

Now we can prepare the journal entry

Date                          Particulars              Debit ($)               Credit($)

February 28, 2016     Interest receivable        250

                                          Interest                                    250

                           To record accrued interest  

Preparing the journal entry to record discounting

To begin preparing the Journal entry, we must first calculate the necessary data.

We can calculate the cash as the difference between Maturity Value and Discount. That is,

Cash = Maturity Value – Discount

The value of Maturity is unknown. We can compute it as the sum of the receivable notes and interest. That is,

Maturity Value = Notes receivable + Interest

Interest =Notes receivable × Rate of interest × Period

= $15,000 × 0.1 × 6/12

= $1,500 × 0.5

= $750

​Maturity Value = Notes receivable + Interest

= $15,000 + $750

=  $15,750

Discount =Maturity Value × Discount rate × Period

= $15,750 × 0.12 ×  4/12

= $1,890 × 0.33

= $630

Finally, we can calculate cash

Cash = Maturity Value – Discount

= $15,750 − $630

= $15,120

Loss on sale = Cash – Notes receivable - Interest

= $15,120 − $15,000 − $250

= $130

Finally, we can prepare our journal entry.

Date                        Particulars                   Debit ($)            Credit($)

February 28,2016     Cash                            15,120

                              Loss on sale                      130

                              Notes receivable                                               15,000

                                  Interest                                                  250

                       (To record discounting)  

Thus, Cash & Loss are debited, & Notes Receivable & Interest are credited.

Learn more about Notes Receivable

https://brainly.com/question/13741240

#SPJ1

​

​

​

​

​

​

​

​

Answer:

---------------------------------

Given sequence:

This is decreasing sequence since the common difference is negative, d = - 8.

Therefore the first term is the largest one:

The graph below shows the number of blocks away from home Bentley is 21 minutes after he left his house, until he got back home.

The distance-timed graph is the type of graph that is used to represent the relationship that exists between the distance covered by a moving object and the time take to reach its destination.

The distance covered from house to store= 4 blocks

The time used = 2 minutes

The distance covered from store to the bank = 10 blocks

The time used = 7 minutes

The time used to return home from the bank = 12 minutes

Therefore, Bentley is 21 minutes after he left his house, until he got back home. That is 2+7+12 = 21 minutes.

Learn more about graph here:

https://brainly.com/question/25184007

#SPJ1

Monthly payment for United bank = $1207.70, monthly payment for capitol bank =$1834.62. Total interest from United bank = $75600 and from capitol bank = $135000.

Total interest is determined by the addition of all the interest payments.

United bank offers mortgage at an APR of 4.2%

APR means annual percentage rate.

mortgage is offered for the period of 15 years.

initial principal amount of Marcy = $120000

we need to determine the monthly payment from United bank.

at first, we will determine the rate of interest per month.

monthly interest rate = (4.2) / (100 × 12) = 0.0035

1 year = 12 months

15 years = 15×12 = 180 months

monthly payment is calculated by the formula = [rate + (rate) / {(1+rate)∧month}⁻¹] ×principal

monthly payment = [ 0.0035 + (0.0035) / {(1+0.0035)∧180}⁻¹] ×120000

                          = $1207.70

from united bank monthly payment = $1207.70

Now we calculate the monthly payment from Capitol bank.

APR for capitol bank = 4.5%

number of years for which mortgage is issued = 25 years

number of months = 12×25 = 300.

monthly interest rate = (4.5) / (100×12) = 0.00375

monthly payment for capitol bank = [0.00375 + (0.00375) / {(1+0.00375)∧300}⁻¹] × 120000

                 = 1834.62

monthly payment from Capitol bank = $1834.62

total interest from Capitol bank = principal money × yearly interest rate × time period.

Total interest = 120000 × 4.5/100× 25

                        = $135000 for the Capitol bank

Total interest from United bank = principal amount × yearly interest × time period

            = 120000× 4.2/100 × 15

total interest from united bank   = $75600

United bank has lower total interest.

difference in monthly payment = 1834.62 - 1207.70

                                                   = 626.92 dollars

To learn more about annual percentage rate visit:

https://brainly.com/question/13358341

#SPJ1

Answer:

[tex]\textrm{P(no yellow on two picks )} = \dfrac{16}{121}[/tex]

Step-by-step explanation:

The total number of pens is 1 + 3 + 7 = 11 out of which 7 are yellow.

(We don't really care what color the other pens are since we are interested only in the yellow pens)

[tex]\textrm{P(yellow on first pick )} = \dfrac{\textrm{Number of yellow pens}}{\textrm{Total number of pens}} = \dfrac{7}{11}[/tex]

The probability of not getting a yellow on first pick is the complement of this probability and is 1 less than the probability of picking an yellow

[tex]\textrm{P(not yellow on first pick )} = 1- \dfrac{7}{11} = \dfrac{4}{11}[/tex]

Since we are putting back the pen after the first pick, the total number of pens as well as pens of each color remain the same.

Therefore the probability of not getting a yellow on second pick is the same as the first pick and is [tex]\dfrac{4}{11}[/tex]

The combined probability of not getting an yellow on both picks is the product of these probabilities

[tex]\textrm{P(no yellow on two picks )} = \dfrac{4}{11}\cdot \dfrac{4}{11} = \dfrac{16}{121}[/tex]

The correct option is option D) A statistic is a random variable.

We derive the above answer due to the following reason,

Any statistic is a random variable with its own distribution referred to as the sampling distribution as it is a function of sample values and there may be several samples taken from a given population.

The probability distribution of a statistic that is acquired by the continuous sampling of a particular population is called the sampling distribution. It outlines a variety of potential possibilities for a statistic, such as the mean or mode of a population's mean or the mode of a variable.

There are three standard types of sampling distributions in statistics:

Read more about Statistics from:

https://brainly.com/question/29342780

#SPJ4

Answer:

a)not quadratic

b)quadratic

c)quadratic

d)not quadratic

a) x=-3

b) maximum is (-3,4)

c)[tex](-3-\sqrt{2},0)[/tex] and[tex](-3+\sqrt{2},0)[/tex]

d)(0,-14)

e) Domain: (-∞,∞), {xIx∈ℝ}

   Range: (-∞,4), {yIy≤4}

Step-by-step explanation:

Hope this helps!

Consequently, the probability of producing precisely one girl or exactly one male 0.25 + 0.25 = 0.5P(x = 1) = 4C1 * 0.5^1 * 0.5^3; 0.9375 ; 0.5

Probability theory, a subfield of mathematics, gauges the likelihood of an occurrence or a claim being true. An event's probability is a number between 0 and 1, where approximately 0 indicates how unlikely the event is to occur and 1 indicates certainty.

Due to this:

p = 0.5

Modeling the probability of how many females the couple has:

[tex]P(x =x) is equal to nCx * px * (1 - p) (n - x)\\P(x = 0) = 4C0 * 0.5^0 * 0.5^4 = 0.0625\\\=P(x = 1) = 4C1 * 0.5^1 * 0.5^3 = 0.25\\P(x = 2) = 4C2 * 0.5^2 * 0.5^2 = 0.375\\P(x = 3) = 4C3 * 0.5^3 * 0.5^1 = 0.25\\P(x = 4) = 4C4 * 0.5^4 * 0.5^0 = 0.0625[/tex]

likelihood of having at least one female

N = 4 trials in total.

P(x 1) is equal to p(x = 1) plus p(x = 2) plus p(x = 3) plus p(x = 4)

Employing the relation

P(x =x) is equal to nCx * px * (1 - p) (n - x)

use a calculator

P(x ≥ 1) = 0.9375

Chances of getting just one female or exactly one boy

3 females OR 3 boys OR 1 boy

P(x = 1)

P(x =x) is equal to nCx * px * (1 - p) (n - x)

P(x = 1) = 4 * 0.5 * 0.125

P(x = 1) = 0.25

The likelihood of getting one girl and three males or vice versa is 0.25

Consequently, the likelihood of producing precisely one girl or exactly one male

0.25 + 0.25 = 0.5P(x = 1) = 4C1 * 0.5^1 * 0.5^3 is 0.9375 ; 0.5

To know more about probability here

https://brainly.com/question/11234923

#SPJ1

The two factors such that their product is the first number and their sum is the second number are 8 and 5.

A factor is defined as the number that divides another number, leaving no remainder.

In other words, if multiplying two numbers gives us a product, then the number we multiply is a factor of the product and divided by the product.

The factors of 40 and 13 such that their product is the first number and their sum is the second number = 8 and 5.

That is, 8×5 = 40

8+5 = 13

Learn more about factors here:

https://brainly.com/question/26504247

#SPJ1