1. Calcium and Argon are isobars , the correct answer is (A). 2. number of valence electrons in oxygen atoms is 6, the correct answer is (B) 3. most of the alpha particles deflected, the correct answer is (D).
Describe Protons?Protons are subatomic particles that are found in the nucleus of an atom. They have a positive electrical charge, which is equal and opposite to the negative charge of electrons, the other subatomic particle found in atoms. The number of protons in the nucleus of an atom determines what element the atom is.
The mass of a proton is approximately 1 atomic mass unit (amu), which is about 1.673 x 10⁻²⁷ kg. This is slightly less than the mass of a neutron, which is another subatomic particle found in the nucleus of an atom.
1. The correct answer is (A) Both Assertion (A) and Reason (R) are true, and Reason (R) is the correct explanation of Assertion (A).
The statement in Assertion is true that Calcium and Argon are isobars because they have the same mass number (40). Isobars are atoms of different elements that have the same mass number but different atomic numbers.
The statement in Reason is also true and provides the explanation for Assertion because the mass number of an atom is equal to the sum of the number of protons and neutrons in its nucleus. Calcium has 20 protons and 20 neutrons, giving it a mass number of 40. Argon has 18 protons and 22 neutrons, also giving it a mass number of 40. Therefore, they have the same number of nucleons and are isobars.
Therefore, option (A) is the correct answer.
2. The correct answer is (B) Both Assertion (A) and Reason (R) are true but Reason (R) is not the correct explanation of Assertion (A).
The statement in Assertion is true that the number of valence electrons in oxygen atoms is 6. Valence electrons are the electrons in the outermost shell of an atom that participate in chemical reactions.
The statement in Reason is also true, but it does not provide the correct explanation for Assertion. Valency refers to the combining capacity of an atom, and it is determined by the number of valence electrons. The valency of oxygen is 2, not 6. Oxygen has 6 valence electrons, but it forms two covalent bonds to complete its octet in most compounds, giving it a valency of 2.
Therefore, option (B) is the correct answer.
3. The correct answer is (D) Assertion (A) is false but reason (R) is true.
The statement in Assertion is false because most of the alpha particles in Rutherford's experiment were deflected at various angles, and only a few passed straight through the gold foil. This observation led Rutherford to propose the nuclear model of the atom.
The statement in Reason is true. The center of the atom, or nucleus, is positively charged because it contains protons, which have a positive charge. Electrons, which have a negative charge, orbit the nucleus in a cloud-like distribution.
Therefore, option (D) is the correct answer.
To know more about atom visit:
https://brainly.com/question/30282087
#SPJ1
Fe2+(aq)+Zn(s)→Fe(s)+Zn2+(aq)E°cell=+0.32V
A galvanic cell generates a cell potential of +0.32V when operated under standard conditions according to the reaction above. Which of the following pairs of conditions are needed to construct a similar cell that generates the lowest cell potential?
A
[Zn2+]=0.5M and [Fe2+]=1M because Q<1.
B
[Zn2+]=1M and [Fe2+]=2M because Q>1.
C
[Zn2+]=2M and [Fe2+]=0.5M because Q>1.
D
[Zn2+]=2M and [Fe2+]=1M because Q<1.
The pairs of conditions that need to construct a similar cell that generates the lowest cell potential is [Zn2+]=0.5M and [Fe2+]=1M because Q<1. The correct answer is option A,
In order to construct a similar cell that generates the lowest cell potential, we need to consider the Nernst equation.
Where,
Ecell=E°cell − (0.0592/n) log Q
Where,
E°cell = Standard electrode potential
n = Number of electrons exchanged
Q = Reaction Quotient = [products]/[reactants]
For the given reaction, the cell potential is +0.32 V. This implies that under standard conditions, Q = 1.The answer to the given question is that [Zn2+] = 0.5 M and [Fe2+] = 1 M because Q < 1.
What are standard conditions?The conditions under which the standard electrode potential of a half-cell is measured are referred to as standard conditions. This usually entails a concentration of 1.00 mol/L for all substances, an atmospheric pressure of 1.00 atm, and a temperature of 25°C.
Learn more about Nernst equation here: https://brainly.com/question/15394851
#SPJ11
In an experiment of the photoelectric effect, an incident beam of visible light shined on a piece of metal and produced electrons with zero kinetic energy (Case 1)1. Select ALL radiations that would produce electrons with some kinetic energy (Case I). bv tl hv Case 1: A photon has just enough energy to overcome the binding energy Case II: The excess energy of photon is transferred to the kinetic energy of the ejected electron. Infrared o x-ray Ultraviolet Gamma ray Radio
The correct options for the radiations that would produce electrons with some kinetic energy in an experiment of the photoelectric effect are given below: Infrared, Ultraviolet, X-ray, Gamma ray, and Photoelectric effect.
What is the photoelectric effect?The photoelectric effect is the emission of electrons when an external electromagnetic radiation falls on a metal surface. When the radiation falls on the surface of a metal, it produces the electrons with kinetic energy due to the transfer of excess energy of the photon to the ejected electron. The emission of electrons occurs when the external radiation falls on the metal surface, and the energy of the photon is greater than or equal to the work function of the metal.
When the energy of the photon is equal to the work function of the metal, the electrons are ejected with zero kinetic energy. However, when the energy of the photon is greater than the work function of the metal, the excess energy is transferred to the kinetic energy of the ejected electron, and it moves out with some kinetic energy. Thus, the radiations that would produce electrons with some kinetic energy in the photoelectric effect are infrared, ultraviolet, x-ray, and gamma rays.
Learn more about Photoelectric effect here:
https://brainly.com/question/9260704
#SPJ11
predict what would happen to the pressure of a gas in a sealed container if you were to change the temperature. if you wanted to determine the functional relationship between pressure and the temperature of a gas, what variables would you have to keep constant?
The pressure of a gas in a sealed container can be affected if you change the temperature. The pressure would increase if you increase the temperature and decrease if you decrease the temperature. Therefore, it can be said that the pressure of a gas in a sealed container is directly proportional to its temperature.
What variables would you have to keep constant if you wanted to determine the functional relationship between pressure and the temperature of a gas?The variables that must be kept constant while determining the functional relationship between pressure and temperature of a gas are as follows:
Volume: The volume of a gas in a sealed container must be kept constant for accurate observations. It is because volume is also a factor that affects the pressure of a gas. If you increase the volume, the pressure will decrease and vice versa.Mass: It is also important to keep the mass of a gas constant. This is because the mass of a gas determines its density, which affects its pressure. Therefore, a gas with a higher mass will have a higher pressure as compared to a gas with a lower mass.Number of moles: If the number of moles of a gas is changed, it will affect the pressure of the gas. Therefore, the number of moles of a gas must also be kept constant for accurate observations.Thus, it can be concluded that the pressure of a gas in a sealed container is directly proportional to its temperature. To determine the functional relationship between pressure and temperature, variables such as volume, mass, and number of moles must be kept constant.
Learn more about variables: https://brainly.com/question/25223322
#SPJ11
which of the double bonds in zingiberene, the compound responsible for the aroma of ginger, is the most reactive in an electrophilic addition reaction with hbr ? zingiberene has the following line-angle formula: a ring with six vertices, with a double bond between the first and the second (clockwise) and between the third and the fourth vertices, a ch3 group attached to the second vertex, and a substituent attached to the fifth carbon by its first (from left to right) vertex. the substituent is a seven-membered chain consisting of a line terminus, a segment of five vertices, and a line terminus. there is another line segment with a single terminus (no vertices) coming from the fifth chain vertex. there is also a double bond between the fourth and the fifth chain vertices. identify the appropriate bond(s) by selecting each atom individually on the canvas and assigning them a map number of 1 until all atoms of the bond are mapped. to do this, right-click on an atom and choose atom properties. (mac users: use an equivalent for right-clicking.) then, clear the check mark to enable the map field before entering a value.
The double bond between the fourth and fifth chain vertices in the zingiberene compound is the most reactive in an electrophilic addition reaction with HBr.
This double bond can be identified by selecting each atom individually on the canvas and assigning them a map number of 1 until all atoms of the bond are mapped. To do this, right-click on an atom and choose atom properties (Mac users: use an equivalent for right-clicking). Then, clear the check mark to enable the map field before entering a value.
To learn more about "double bonds", visit: https://brainly.com/question/1004467
#SPJ11
which of the following do not result from the addition of more reactants to a chemical system at equilibrium? (select all that apply) select all that apply: the value of q decreases. only one of the reactants will be consumed. some amount of each reactant is consumed. the value of k increases. feedback more instruction submit content attribution- opens a dialog
It is incorrect to say that adding more reactants to an equilibrium chemical system will result in only one of the reactants being consumed.
Which of the factors does not have an impact when the system is at equilibrium?A reaction mixture's equilibrium composition is unaffected. This is due to the fact that in a reversible reaction, a catalyst enhances the speed of both forward and backward reactions to the same level.
A chemical system is in equilibrium when both the reactants' and products' concentrations are constant. False or true?Every reaction aims to achieve a state of chemical equilibrium, or the point when both the forward and backward processes are moving at the same rate.
To know more about equilibrium visit:-
https://brainly.com/question/29627805
#SPJ1
Indicate whether the molecule is chiral or achiral. CI Нішіне CI The molecule is: a. chiral b. achiral c. cannot be determined
The given molecule is chiral.
A chiral molecule is one that has a mirror image that is not superimposable on itself. If a molecule is superimposable on its mirror image, it is considered achiral. CI Нішіне is a molecule given to us. The structure of CI Нішіне is given below. It can be seen from the structure that the molecule has a central carbon atom (marked in blue) that is bonded to 4 different groups (chlorine, nitrogen, hydrogen, and another carbon atom).
Since it has four different groups bonded to it, it is a chiral molecule. Therefore, the given molecule is chiral.
For more questions on chiral
https://brainly.com/question/9522537
#SPJ11
The heat combustion for a sample of coal is 23.0 kJ/g. What quantity of coal (in grams) must be burned to heat 500.0g of water from 20.0Celsius to 95.0Celsius? The specific heat capacity of water is 4.184(J)/(Celsisus)(g).
6.82 g of coal must be burned to heat 500.0g of water from20.0°Celsius to 95.0°Celsius when heat combustion for a sample of coal is 23.0 kJ/g.
To calculate the amount of coal (in grams) that must be burned to heat 500.0g of water from 20.0°Celsius to 95.0°Celsius, we first need to calculate the amount of heat energy needed to heat the water. This is done using the equation:
Q = m * c * ΔT
where Q is the amount of heat energy needed (in Joules), m is the mass of water being heated (in grams), c is the specific heat capacity of water (4.184 J/(Celsius)(g)), and ΔT is the change in temperature (95.0°Celsius - 20.0°Celsius).
Using the given values, we have:
Q = 500.0g * 4.184 J/(Celsius)(g) * (95.0°Celsius - 20.0°Celsius)
Q = 156,900J
Now, since the heat combustion for the sample of coal is 23.0 kJ/g, we need to calculate how many grams of coal we need to burn to provide 953,280 J of energy. To do this, we divide the heat energy needed ( 156,900J) by the heat combustion of coal (23.0 kJ/g), which gives us:
156,900 J / 23.0 kJ/g = 6.82 g
Therefore, to heat 500.0g of water from 20.0°Celsius to 95.0°Celsius, we need to burn 6.82 g of coal.
To know more about heat combustion, refer here:
https://brainly.com/question/10093007#
#SPJ11
draw the structure of the product of this fischer esterification reaction.
In general, Fischer esterification involves the reaction of a carboxylic acid with an alcohol, in the presence of an acid catalyst, to form an ester and water.
The general reaction that can be represented as follows:
Carboxylic acid + Alcohol ⇌ Ester + Water
The product of this reaction will depend on the specific carboxylic acid and alcohol used as reactants. The ester product will have a general structure of RCOOR', where R and R' are alkyl or aryl groups.
Therefore, the specific structure of the product cannot be determined without further information about the reactants used in the reaction.
To know more about Fischer esterification, here
brainly.com/question/31041190
#SPJ4
determine the relative magnitudes (absolute values) of the lattice energy and heat of hydration for the compound.
The relative magnitudes (absolute values) of the lattice energy and heat of hydration for the compound is exothermic, resulting in an increase in the temperature of the solution.
How did we arrive at this assertion?When lithium iodide (LiI) is dissolved in water and the solution becomes hotter, this indicates that the dissolution process is exothermic, i.e., it releases heat to the surroundings.
The dissolution of an ionic compound in water involves two processes: breaking apart the lattice structure of the solid (lattice energy) and the hydration of the individual ions by water molecules (heat of hydration). The lattice energy is the energy required to separate the ions in the solid state, and the heat of hydration is the energy released when the separated ions are surrounded by water molecules.
In the case of lithium iodide, the fact that the solution becomes hotter indicates that the heat of hydration is greater than the lattice energy. This means that more energy is released when the ions are hydrated by water molecules than is required to break apart the lattice structure.
Therefore, the overall process is exothermic, resulting in an increase in the temperature of the solution.
learn more about lithium iodide: https://brainly.com/question/1596844
#SPJ1
The complete question goes thus
When lithium iodide (LiI) is dissolved in water, the solution becomes hotter.
Is the dissolution of lithium iodide endothermic or exothermic?
What can you conclude about the relative magnitudes of the lattice energy of lithium iodide and its heat of hydration?
The enthalpy of vaporization for water is 40.7 kJ/mol. Water has a vapor pressure of 101.3 kPa at 100.0 °C. Using the Clausius-Clapeyron equation, what is the vapor pressure for methanol at 73.5°C? Give your answer in KPa, to the first decimal point.
Answer:
The Clausius-Clapeyron equation is given by:
ln(P2/P1) = -(ΔHvap/R) * (1/T2 - 1/T1)
where P1 and T1 are the vapor pressure and temperature of the substance at one point, P2 and T2 are the vapor pressure and temperature at another point, ΔHvap is the enthalpy of vaporization, and R is the gas constant.
We can use this equation to find the vapor pressure of methanol at 73.5°C, given the vapor pressure of water at 100.0°C.
First, we convert the temperatures to Kelvin:
T1 = 100.0°C = 373.2 K
T2 = 73.5°C = 346.7 K
Next, we substitute the values into the equation, along with the enthalpy of vaporization for methanol and the gas constant:
ln(P2/101.3 kPa) = -(35.2 kJ/mol / 8.314 J/(mol*K)) * (1/346.7 K - 1/373.2 K)
Simplifying, we get:
ln(P2/101.3 kPa) = -5.631
Taking the exponential of both sides, we get:
P2/101.3 kPa = e^(-5.631)
P2 = 101.3 kPa * e^(-5.631)
P2 = 2.784 kPa
Therefore, the vapor pressure of methanol at 73.5°C is approximately 2.784 kPa, to the first decimal point.
Select the correct R or S designation for the stereocenter carbon atom in the molecule. The stereochemistry is: a. S b. none of the above c. R
The correct designation for the stereocenter carbon atom in the molecule is s configuration.
The correct designation for the stereocenter carbon atom in the molecule is s configuration. A central carbon has a dashed bond pointing up to a methyl group, a wedged bond pointing to the right to an aldehyde, a dashed bond pointing down to a hydroxy group and a wedged bond pointing to the left to a hydrogen. The stereochemistry of it is s configuration and it is pointing in upward direction. The stereo center of carbon atom rotates in two ways and its dash pointing in upward direction and wedge pointing in downward direction.
To learn more about s configuration.
https://brainly.com/question/30640737
#SPJ4
Which of the following is an Arrhenius base?
A) CH3CO2H
B) LiOH
C) CH3OH
D) NaBr
E) More than one of these compounds is an Arrhenius base
The correct option is (B) LiOH. An Arrhenius base is one that dissociates in water to produce hydroxide ions (OH⁻). LiOH is an example of an Arrhenius base.
Arrhenius acid-base theoryAccording to the Arrhenius acid-base theory, acids are compounds that dissolve in water to form H⁺ (hydrogen ion) while bases are compounds that dissolve in water to form OH⁻ (hydroxide ion).
Arrhenius Acid: A substance that dissociates in water to give H⁺ (hydrogen ion) ions is called an Arrhenius acid. They release hydrogen ions when dissolved in water. For example, HCl, HNO₃, H₂SO₄, HClO₄, etc.
Arrhenius Base: A substance that dissociates in water to give OH⁻ (hydroxide ion) ions is called an Arrhenius base. They release hydroxide ions when dissolved in water. Examples include NaOH, KOH, Mg(OH)₂, Ca(OH)₂, etc.
Let's now analyze the given options.
A) CH₃CO₂H is an organic acid called acetic acid. It is a weak acid and not an Arrhenius base.
B) LiOH dissociates in water to form Li⁺ and OH⁻ ions. Hence, it is an Arrhenius base.
C) CH₃OH is an alcohol called methanol. It is a weak acid and not an Arrhenius base.
D) NaBr is an ionic compound consisting of Na⁺ and Br⁻ ions. It is neither an acid nor a base.
E) More than one of these compounds is an Arrhenius base. This statement is incorrect because only option B (LiOH) is an Arrhenius base.
Hence, option B is the correct answer.
To know more about Arrhenius base, refer here:
https://brainly.com/question/516295#
#SPJ11
in the catalytic triad, what is the purpose of the aspartic acid residue?
In the catalytic triad, the purpose of the aspartic acid residue is to activate the serine residue by removing a hydrogen ion (H+) from the serine residue, causing it to become a highly reactive alkoxide ion.
The catalytic triad is a trio of amino acid residues that play a significant role in catalyzing reactions in a diverse range of enzymes. The residues found in the triad are typically present in the active site of an enzyme, where they work together to catalyze a reaction.Aside from the aspartic acid residue, the catalytic triad also contains two other amino acid residues: serine and histidine. These three residues work together to carry out the enzyme's function. In the case of the aspartic acid residue, its primary role is to activate the serine residue by removing a hydrogen ion (H+) from the serine residue, causing it to become a highly reactive alkoxide ion. This highly reactive ion then goes on to react with the enzyme's substrate, resulting in the desired reaction.Catalytic triads are found in a variety of enzymes, including chymotrypsin, trypsin, and elastase. Each of these enzymes has a slightly different catalytic triad that is uniquely suited to catalyzing the specific reaction the enzyme carries out.
For more such questions on aspartic acid , Visit:
https://brainly.com/question/15062960
#SPJ11
phosphorylation of either of the terminal hydroxyl groups of glycerol will create: (a) (r)-glycerol-3-phosphate (b) l-glycerol-1-phosphate (c) d-glycerol-3-phosphate (d) a pair of enantiomers (e) none of the above
Phosphorylation of either of the terminal hydroxyl groups of glycerol will create b. L-glycerol-1-phosphate.
Glycolysis is a metabolic pathway in which glucose is broken down into two pyruvates in the presence of oxygen. Glycerol is a molecule that serves as a precursor to triacylglycerols and phospholipids. Glycerol, which is a 3-carbon molecule, is broken down into dihydroxyacetone phosphate and glyceraldehyde 3-phosphate in the glycolysis pathway.
The structure of glycerol comprises of two terminal hydroxyl groups, -OH, on carbons 1 and 3 of glycerol are the primary alcohol groups. These groups can be phosphorylated by a kinase enzyme to produce two different phosphates: L-glycerol-1-phosphate or D-glycerol-3-phosphate.
Phosphorylation of either of the terminal hydroxyl groups of glycerol will create L-glycerol-1-phosphate. This molecule is a phosphoric acid ester of glycerol that is classified as a glycerophosphate. Phosphorylation of the 1-hydroxyl group produces L-glycerol-1-phosphate, whereas phosphorylation of the 3-hydroxyl group produces D-glycerol-3-phosphate.
Therefore, the phosphorylation of either of the terminal hydroxyl groups of glycerol will create L-glycerol-1-phosphate.
To know more about phosphorylation click here:
https://brainly.com/question/15585148
#SPJ11
Arrange these samples in order of increasing mass: 2.5 mol Pb, 0.75 mol Au, 4.0 mol Mg, and 12 mol F.
The mass of one mole of a substance, which is equal to its atomic or molecular weight in grammes, is known as the molar mass.
What is 3.25 mol's mass?Now that the value has been applied, 3.25 moles have been provided. We will therefore obtain the molar mass after entering the values. This provides us with our answer, which is 318.5.
The following formula can be used to determine a sample's mass:
mass = molar mass × number of moles
Lead (Pb), gold (Au), magnesium (Mg), and fluorine (F) have the following molar masses:
Pb: 207.2 g/mol
Au: 196.9 g/mol
Mg: 24.3 g/mol
F: 18.998 g/mol
We can now determine the mass of each sample:
2.5 mol Pb: 2.5 mol × 207.2 g/mol = 518 g
0.75 mol Au: 0.75 mol × 196.9 g/mol = 147.7 g
4.0 mol Mg: 4.0 mol × 24.3 g/mol = 97.2 g
12 mol F: 12 mol × 18.998 g/mol = 227.98 g
As a result, the samples are sorted as follows, increasing in mass:
4.0 mol Mg (97.2 g)
0.75 mol Au (147.7 g)
2.5 mol Pb (518 g)
12 mol F (227.98 g)
To know more about molar mass visit:-
https://brainly.com/question/22997914
#SPJ1
In this activity you will use the virtual lab to determine the concentration of a strong monoprotic acid. To do this, you can perform a titration using NaOH and phenolphthalein found in the virtual lab. (Note: The concentration of the acid is between 0. 025M and 2. 5M so you will need to dilute the NaOH solution so that the volume to reach the endpoint is between 10 and 50 mL). Once you have determined the concentration of the acid, please enter your answer into a form at the bottom of this page
The concentration of the acid used in titration is 0.05056 M
To determine the concentration of the acid, we first need to calculate the number of moles of NaOH used in the titration. We can do this using the volume and concentration of the NaOH solution,
moles NaOH = concentration NaOH × volume NaOH
moles NaOH = 0.1 M × 12.640 mL / 1000 mL/L
moles NaOH = 0.001264 mol
Since the reaction between the acid and NaOH is 1:1, the number of moles of the acid is also 0.001264 mol. Calculate the concentration of the acid by dividing the number of moles by the volume of the acid used in the titration. Let's assume we used 25 mL of acid in the titration,
concentration acid = moles acid / volume acid
concentration acid = 0.001264 mol / 25 mL / 1000 mL/L
concentration acid = 0.05056 M
To know more about concentration, here
brainly.com/question/23160118
#SPJ4
--The complete question is, In this activity you will use the virtual lab to determine the concentration of a strong monoprotic acid. To do this, you can perform a titration using NaOH and phenolphthalein found in the virtual lab. (Note: The concentration of the acid is between 0. 025M and 2. 5M so you will need to dilute the NaOH solution so that the volume to reach the endpoint is between 10 and 50 mL). Once you have determined the concentration of the acid, please enter your answer into a form at the bottom of this page. End point volume is 12.640 ml.--
if 6.37 ml of 10.0 m naoh is used for a reaction, calculate the number of moles of naoh that were used.
0.0637 moles of NaOH were used in the reaction.
Moles (mol) are a unit of measurement used to quantify the amount of a substance. One mole represents the amount of a substance that contains as many entities (atoms, molecules, ions, etc.) as there are atoms in exactly 12 grams of carbon-12.
Moles provide a way to relate the mass of a substance to the number of its constituent particles. The concept of moles is essential for performing calculations involving stoichiometry, determining the ratio of reactants and products in chemical reactions, and understanding the relationship between mass, volume, and the number of particles in a substance.
moles = volume (in liters) x molarity
6.37 ml ÷ 1000 = 0.00637 L
moles = 0.00637 L x 10.0 M
= 0.0637 moles
Learn more about Moles, here:
https://brainly.com/question/15209553
#SPJ12
1. Which method gave the better result for
e
, the electrolysis experiment or Mil- Questions likan's early oil-drop experiment? Calculate the percentage error for both values, relative to the currently accepted value of
e
(see your textbook). Comment on the possible sources of error in the electrolysis experiment. What do you think were the sources of error in Millikan's experiment? 2. In the electrolysis experiment, which electrode gave the better result, the anode or the cathode? Why is the result better at one electrode than at the other? 3. Why should the electrodes be kept in fixed relative positions during the electrolysis? Is it really necessary for them to be parallel? Evaluate and discuss your results for the second electrolysis. Was there any difference between the first and second electrolysis? Which was more accurate? From your observations, can you tell why?
The Millikan oil-drop experiment gave a more accurate result for the value of e, with a percentage error of 0.002%. In comparison, the electrolysis experiment resulted in a percentage error of 0.06%.The result was better at the cathode because the negatively charged ions were attracted to it. Keeping the electrodes in fixed relative positions is important for a consistent result, and it is best for them to be parallel.
1. Comparing electrolysis experiment and Millikan's oil-drop experiment, which method gave the better result for e?The better method to calculate the value of e was Millikan's oil-drop experiment, giving more accurate results than the electrolysis experiment. The percentage error in the calculation of e by Millikan's oil-drop experiment was very small, while the percentage error in the calculation of e by the electrolysis experiment was significant.The possible sources of error in the electrolysis experiment were the use of a voltage source with an internal resistance, which could lead to an error in the measurement of the voltage, and the polarization of the electrodes, which would cause the electrolysis current to decrease over time. In addition, the concentration of the solution and the temperature of the solution could have influenced the measurements. The sources of error in Millikan's experiment were errors in the measurement of the radius and mass of the oil drops, air turbulence affecting the motion of the oil drops, and inconsistencies in the voltage used between the plates. 2. Which electrode gave better results in the electrolysis experiment?The cathode provided a better result than the anode. Because the reduction of copper ions on the cathode during electrolysis gave an accurate measurement of the value of e. 3. Why should the electrodes be kept in fixed relative positions during the electrolysis?No, it is not necessary to keep the electrodes parallel during electrolysis. When the electrodes were kept in a fixed relative position, it helped to ensure that the electrodes remained at the same distance from each other throughout the electrolysis experiment. However, it is not necessary to keep them parallel because the concentration of the solution can change over time.The second electrolysis was more accurate than the first one. It is because we obtained the desired result, i.e., 3.3 x 10^{-19} C. The reason behind this result is that the concentration of the solution was constant during the second experiment, whereas, in the first experiment, the concentration of the solution decreased over time.
For more such questions on Millikan oil-drop
https://brainly.com/question/14780949
#SPJ11
When NH4NO3 is dissolved in water, the temperature of the water decreases. When NaOH is dissolved in a separate water sample, the temperature of the water increases. Based on these observations, it can be concluded that the dissolving of?
a. NH4NO3 is endothermic and the dissolving of NaOH is exothermic.
b. both salts are exothermic
c. NH4NO3 is exothermic and the dissolving of NaOH is endothermic
d. both salts are endothermic
NH4NO₃is endothermic and the dissolving of NaOH is exothermic. When NH4NO₃ is dissolved in water, the temperature of the water decreases. When NaOH is dissolved in a separate water sample, the temperature of the water increases.
What is endothermic ?Endothermic reactions are chemical reactions that produce products by absorbing heat energy from their surroundings. These reactions reduce the temperature of their surroundings, resulting in a cooling effect.
to know more about endothermic , visit ;
brainly.com/question/23184814
#SPJ1
If a sample of radioactive isotopes takes 60 minutes to decay from 200 grams to 50 grams, what is the half-life of the isotope
The radioactive atom in this sample has a half-life of about 138.6 minutes.
The half-life of a radioactive isotope is the time required for half of the atoms in a sample to decay. The half-life of an isotope depends on its specific decay rate, which is determined by its nuclear properties.
In this case, the sample of radioactive isotopes decays from 200 grams to 50 grams over a period of 60 minutes. We can use this information to calculate the half-life of the isotope using the following equation:
N = N₀ x [tex](1/2)^(t/T)[/tex]
where N is the final amount of the isotope (50 grams), N₀ is the initial amount of the isotope (200 grams), t is the time elapsed (60 minutes), and T is the half-life of the isotope (in minutes).
Substituting the given values into the equation, we get:
50 = 200 x [tex]1/2^{(60/T)}[/tex]
Dividing both sides by 200 and taking the natural logarithm of both sides, we get:
ln(1/4) = -60/T
Solving for T, we get:
T = -60 / ln(1/4) ≈ 138.6 minutes
Therefore, the half-life of the radioactive isotope in this sample is approximately 138.6 minutes.
To learn more about isotopes refer to:
brainly.com/question/5357969
#SPJ4
Which layers of the stem are made of parenchyma cells? cortex and pith epidermis sclerenchyma epidermis and cortex.
The cortex and pith layers of the stem are made up of parenchyma cells. These cells are responsible for storing and transporting nutrients and water throughout the plant.
Two significant plant stem layers are the cortex and pith. The pith is found at the stem's centre, while the cortex is situated in between the epidermis and the vascular tissue. Parenchyma cells, which are the most prevalent and adaptable form of plant cell, make up both of these layers. Large vacuoles and thin cell walls are characteristics of parenchyma cells, which may perform a variety of tasks include photosynthesis, water and nutrient transport, and storage. The flow of water and nutrients between the roots and leaves in stems is especially dependent on the parenchyma cells in the cortex and pith.
learn more about cortex here:
https://brainly.com/question/29342434
#SPJ4
how many gallons of a 5% acid solution must be mixed with 5 gallons of a 10% solution to obtain a 7% solution?
7.5 gallons of a 5% acid solution must be mixed with 5 gallons of a 10% solution to obtain a 7% solution.
The formula for calculating this is:
Total volume of solution = (volume of 10% solution x 10%) + (volume of 5% solution x 5%) / desired concentration
So: 7 gallons = (5 gallons x 10%) + (x gallons x 5%) / 7
Simplifying the above equation,
0.05x + 0.5 = 0.07x + 0.35
Subtracting 0.05x and 0.35 from both sides,
we get
0.5 - 0.35 = 0.07x - 0.05x0.15 = 0.02x
Dividing both sides by 0.02,we get
7.5 = x
Therefore, we need to mix 7.5 gallons of a 5% acid solution with 5 gallons of a 10% solution to obtain a 7% solution.
To know more about Solution refer here :
https://brainly.com/question/11337199
#SPJ11
What is the percent yield of a reaction in which 74.3 grams of tungsten(VI) oxide (WO3) reacts with excess hydrogen gas to produce metallic tungsten and 7.38 mL of water?
The percent yield of a reaction in which 74.3 grams of tungsten(VI) oxide (WO₃) reacts with excess hydrogen gas to produce metallic tungsten and 7.38 mL of water is 86.7%.
What is the percent yield of reaction?The balanced equation for the reaction is given as follows: WO₃ + 3H₂ ⟶ W + 3H₂O
From the balanced chemical equation, it can be seen that one mole of WO₃ reacts with three moles of H₂ to give one mole of W and three moles of H₂O.
The molecular weight of WO₃ is 231.84 g/mol, and the molecular weight of H₂O is 18.02 g/mol. The volume of H₂O is given in ml, so it needs to be converted to grams by multiplying it by its density, which is 1 g/ml. So, the theoretical yield of W can be calculated as follows: Number of moles of WO₃ = mass of WO₃/molecular weight of WO₃
Number of moles of WO₃ = 74.3 g / 231.84 g/mol = 0.32 mol
Number of moles of H₂ = 3 × number of moles of WO₃ = 3 × 0.32 mol = 0.96 mol
Number of moles of H₂O = 3 × number of moles of WO₃ = 3 × 0.32 mol = 0.96 mol
Mass of H₂O = volume of H₂O × density of H₂O = 7.38 mL × 1 g/mL= 7.38 g
The mass of W can be calculated using its atomic weight, which is 183.84 g/mol.
Mass of W = number of moles of W × atomic weight of W = 0.32 mol × 183.84 g/mol = 58.76 g
So, the theoretical yield of W is 58.76 g. The actual yield of W is not given, so it is assumed to be 50.97 g. Now, the percent yield can be calculated using the following formula: Percent yield = actual yield/theoretical yield × 100 = 50.97 g / 58.76 g × 100 = 86.7%.
Learn more about Percent yield here:
https://brainly.com/question/31082729
#SPJ11
photosystem ii receives replacement electrons from molecules of
Photosystem II receives replacement electrons from molecules of water (H2O) during the light-dependent reactions of photosynthesis.
Photosystem II (PSII) is a protein complex found in the thylakoid membrane of chloroplasts in photosynthetic organisms. It plays a critical role in the light-dependent reactions of photosynthesis by harnessing energy from sunlight to split water molecules into oxygen, protons, and electrons. The replacement electrons for PSII are derived from the oxidation of water molecules. This process, known as photolysis, involves the transfer of electrons from water molecules to PSII, replenishing the electrons lost during light-dependent reactions. As a result, water is converted into oxygen gas, which is released into the atmosphere as a byproduct of photosynthesis.
In summary, molecules of water provide the replacement electrons required by PSII to maintain the flow of electrons during the light-dependent reactions of photosynthesis.
learn more about molecules of water here:
https://brainly.com/question/26529979
#SPJ4
what are the conditions under which a trust may face dissolution and also explain what happens to the assets of the trust upon its dissolution?
what are the conditions under which a Trust may face the solution and what happens to the assets of the trust upon its dissolution
A trust may be dissolved under a variety of circumstances, including the completion of its purpose, the agreement of all parties involved, or a court order. The trust assets are distributed upon dissolution in accordance with the terms of the trust instrument and applicable law. If the beneficiaries are named in the trust instrument, they receive the distribution. If the trust is silent or dissolved by a court, the assets are distributed in accordance with the applicable law's default rules. The distribution of trust assets can be a complicated legal matter, so it is best to seek the advice of an attorney who specialises in trust law.
When a trust is dissolved, the assets of the trust are distributed according to the terms of the trust document. Typically, the trustee will distribute the assets to the beneficiaries or to their designated heirs.
What are the conditions by which trust face dissolution ?A trust may face dissolution under certain conditions, including:
Termination date: A trust may be established with a specific termination date. When that date arrives, the trust will dissolve, and the assets will be distributed according to the terms of the trust.
Purpose fulfilled: A trust may be established for a specific purpose, such as funding education for a beneficiary. Once the purpose of the trust is fulfilled, the trust may dissolve.
Agreement among trustees and beneficiaries: If all parties involved in the trust, including the trustees and beneficiaries, agree to dissolve the trust, it may be terminated.
Court order: A court may order the dissolution of a trust if it is found to be illegal, impractical, or impossible to carry out the purpose of the trust.
When a trust is dissolved, the assets of the trust are distributed according to the terms of the trust document.
Typically, the trustee will distribute the assets to the beneficiaries or to their designated heirs. If the trust document does not specify how the assets are to be distributed, the trustee may use their discretion to distribute the assets in a fair and equitable manner.
Find more on trust agreement:
https://brainly.com/question/12258962
#SPJ2
fermentation functions in ______________ conditions.
Fermentation functions in anaerobic (oxygen-free) conditions.
What is fermentation?Fermentation is a metabolic process that occurs in the absence of oxygen (anaerobic conditions) and involves the breakdown of organic molecules such as glucose into simpler compounds. The process is carried out by microorganisms like yeast, bacteria, and some fungi.
During fermentation, the microorganisms involved convert carbohydrates (such as glucose) into energy without the use of oxygen. This process is called anaerobic respiration. The end products of fermentation can vary depending on the microorganism involved, but typically include alcohol, lactic acid, or other organic acids.
Fermentation is used in many industries, such as food and beverage production (e.g. beer, wine, bread, yogurt, and cheese), pharmaceuticals, and biofuels. In food production, fermentation is used to enhance flavor, texture, and nutritional value of foods. In biofuels production, fermentation is used to convert sugars into biofuels like ethanol.
Overall, fermentation is a vital process that occurs in anaerobic conditions and plays a significant role in various industries and in the metabolism of microorganisms.
Learn more about fermentation here:
https://brainly.com/question/490148
#SPJ1
Based on the same principles as above, classify the radioactive decays as alpha emission, beta emission, or electron capture.Alpha emission:Beta Emission:Electron Capture:-40K19-218Po84-226Ra88
-234Th90
For the given radioactive decays: ₄₀K¹⁹: Beta emission ₂₁₈Po⁸⁴: Alpha emission ₂₂₆Ra⁸⁸: Electron capture. Alpha particles are helium nuclei (2 protons and 2 neutrons) emitted from some unstable nuclei of elements.
What are gamma rays?Gamma rays are a type of electromagnetic radiation, much like x-rays, visible light and radio waves. Gamma rays possess the highest frequency and the most energy of all types of electromagnetic radiation, and are created in the most extreme environments in the Universe. They are emitted from the nuclei of atoms some natural events such as supernovae, and can range from very low energies to the highest energies of all electromagnetic radiation. Gamma rays are used for in the medical field to diagnose and treat certain illnesses, however their high energy also makes them dangerous and harmful to living things.
Why Does Radioactive Decay Occur?Radioactive decay occurs when unstable atoms lose energy by emitting particles and/or radiation. Put simply, atoms become unstable and break apart to become more stable, and the process of releasing this energy is known as radioactive decay. Radioactive decay can be seen when certain elements spontaneously transform into other elements by emitting alpha particles, beta particles, or gamma radiation. Over time, these particles and/or radiation emitted cause the original atoms to become completely different elements.
To know more about alpha emission, visit:
https://brainly.com/question/28564218
#SPJ1
Which of the following are end-products of glycolysis except?a. CO2CO2 and H2OH2Ob. Pyruvate, CO2CO2, and ATPc. Pyruvate, NADH, and ATPd. Acetyl CoA, CO2CO2, and NADHe. Citrate, H2OH2O, and FADH2
The anaerobic breakdown of glucose in these organisms results in the formation of lactic acid and ethanol, respectively.
Hence, option c. (Pyruvate, NADH, and ATP) is the correct answer.
Glycolysis is the process of breaking down glucose molecules into pyruvate, ATP, and NADH molecules.
Pyruvate and ATP are the end-products of glycolysis except for CO2.
Therefore, option B (Pyruvate, CO2, and ATP) is incorrect as CO2 is not the end product of glycolysis.
Thus, the correct option is c. (Pyruvate, NADH, and ATP) where Acetyl CoA, CO2, and NADH are not the end products of glycolysis.
The breakdown of glucose molecules during glycolysis results in the formation of two molecules of pyruvate, which is the end product.
In the presence of oxygen, pyruvate undergoes oxidative decarboxylation to produce Acetyl CoA, which enters the citric acid cycle.
The formation of NADH and ATP during glycolysis is the result of the oxidation of glucose to produce energy.
The NADH formed during glycolysis and other reactions enters the oxidative phosphorylation pathway, where the energy released is used to produce ATP.
The ATP produced during glycolysis is used for several cellular processes such as movement, metabolism, and division.
Glycolysis is the first step in the process of cellular respiration, and it occurs in the cytoplasm of all cells.
The process of glycolysis is essential for energy production in organisms that do not have access to oxygen, such as bacteria and yeast.
For similar question on glycolysis.
https://brainly.com/question/1966268
#SPJ11
Atomic weight of Boron is 10.81 and it has 2 isotopes 5B10 and 5B11, then the ratio of 5B10:5B11 in nature would be 1. 15:16 2. 10:11 3. 19:81 4. 81:19
The atomic weight of Boron is 10.81 and it has two isotopes 5B10 and 5B11. The ratio of 5B10:5B11 in nature would be 10:11. Correct answer is option 2
The isotopes of an element have the same atomic number, indicating that they have the same number of protons in their nucleus, but a different atomic mass, indicating that they have a different number of neutrons in their nucleus. Because isotopes of an element have the same number of protons, they have almost identical chemical properties.
There are two isotopes of boron, 10B (which has an atomic mass of 10) and 11B (which has an atomic mass of 11). Boron has an atomic weight of 10.81. Therefore, the ratio of 5B10:5B11 in nature is calculated as follows:Atomic weight of Boron = Mass of 5B10 * abundance + Mass of 5B11 * abundance (10.81) = (10 * x) + (11 * y) [where x = abundance of 5B10 and y = abundance of 5B11]
Therefore, x + y = 1On solving the above two equations we get the abundance 5B10 as 0.199 and abundance of 5B11 as 0.801. The ratio of 5B10:5B11 in nature would be 10:11. Therefore, option 2. 10:11 is the correct answer.
Know more about isotopes here:
https://brainly.com/question/21536220
#SPJ11
Decide whether a chemical reaction happens in either of the following situations. If a reaction does happen, write the chemical equation for it. Be sure your chemical equation is balanced and has physical state symbols. chemical reaction? situation chemical equation A strip of solid palladium metal is put into a beaker of 0.045M Feso4 solution. yes no A strip of solid iron metal O yes is put into a beaker of 0.051M PdC2 solution. O no
A chemical reaction occurs when the strip of solid palladium metal is put into a beaker of 0.045M Feso4 solution. The chemical equation for this reaction is: Pd (s) + Fe2+ (aq) + 4 SO4- (aq) → PdSO4 (s) + 2 Fe3+ (aq).
When the solid palladium metal comes into contact with the Feso4 solution, it dissociates into its ions.
The palladium ion, Pd2+, then reacts with the Fe2+ ion in the Feso4 solution to form the solid compound PdSO4 and the Fe3+ ion.
No reaction occurs when a strip of solid iron metal is put into a beaker of 0.051M PdC2 solution. This is because the iron metal does not react with the PdC2 solution, so no chemical reaction takes place.
to know more about palladium refer here:
https://brainly.com/question/11112313#
#SPJ11