Chen displayed the results of her experiment in the graph that is show below.
What is the dependent variable in her experiment?
A. time (days)
B. duckweed genetics
C. amount of duckweed
D. different water pH levels

Answers

Answer 1

The correct answer is C. amount of duckweed.

What is independent variables?

Independent variables are variables that can be manipulated or changed to observe their effects on a dependent variable. In other words, they are the input of a system. Examples of independent variables include temperature, time, and concentration. These variables are independent of each other and can be changed simultaneously or individually to observe their effects on the outcome.

The dependent variable in Chen's experiment is the amount of duckweed, which is represented on the y-axis of the graph. The independent variables in this experiment are the different water pH levels, which are represented on the x-axis. By plotting the amount of duckweed against the different water pH levels, Chen was able to analyze the effect of the different pH levels on the growth of duckweed.

To know more about independent variables click-
https://brainly.com/question/571013
#SPJ4


Related Questions

Dogs can inherit four features: fur pattern, fur
length, ear length, and tail length. The alleles are expressed as shown:
Dominant alleles
Recessive alleles
F: spotted fur
f: solid-colored fur
L: long fur
1: short fur
E: long ears
e: short ears
T: long tail
t: short tail
Two dogs mate and have puppies. Both parent dogs are heterozygous for spotted fur. Fill in the Punnett square to show the po
dropping the letters)

Answers

Answer:

This is something for biology, it shouldnt be in the physics subject

Explanation:

A coil 3.55 cm in radius, containing 470 turns, is placed in a uniform magnetic field that varies with time according to B=( 1.20×10^−2 T/s )t+( 2.85×10^−5 T/s4 )t^4. The coil is connected to a 610 Ω resistor, and its plane is perpendicular to the magnetic field. You can ignore the resistance of the coil.
a) Find the magnitude of the induced emf in the coil as a function of time.
b) What is the current in the resistor at time t0 = 5.20 s ?

Answers

The current is 1.13* 10^{-4}A

Given that r = radius of the coil = 4 cm = 0.04 m

Area of coil is given as

A = πr²

A = (3.14) (0.04)² = 0.005024 m²

N = Number of turns = 500

R = Resistance = 600 Ω

B = magnetic field = (0.0120)t + (3 x 10⁻⁵) t⁴

Taking derivative at both the side

[tex] \frac{dB}{dt} = (0.120 + (12 \times 10^-5)t^3)[/tex]

Induced current is given as

[tex]i= (\frac{NA}{R} )( \frac{db}{dt} )[/tex]

[tex]i \: = (\frac{NA}{R})(12 \times 10 ^{-5} )t^3[/tex]

substituting the value t = 5

[tex]i = ( \frac{(500)(0.005024)}{600}) (12 \times 10 ^{-5} )5^3[/tex]

[tex]i = 1.13 \times 10 ^{ - 4} A[/tex]

Hence the current is

[tex]1.13 \times 10^-4A[/tex]

Learn more about Electric current here

https://brainly.com/question/1100341

#SPJ1

The Electric current is 1.11* 10^{-4}A


Given that the coil's radius is 3.55 cm (0.35 m),

The formula for the coil's area is A = r2 A = (3.14) (0.35)2 = 0.005024 m2.

R = Resistance = 600 N = Number of spins = 500 B = Magnetic field = (0.0120)

t + (3 x 10⁻⁵) t⁴

The number t = 5 is substituted for taking the derivative at both the induced current and the electric current.

The Electric current is therefore 1.11* 10^{-4}A
Electric current - The rate of electron passage in a conductor is known as electric current. The ampere is the electric current's SI unit. Electrons are little particles that are part of a substance's molecular structure. These electrons can be held loosely or securely depending on the situation.

To learn more about electric current please visit -https://brainly.com/question/12791045
#SPJ1

What is the weight of a 44.5 kg object?

Answers

Answer:

98.11 I think

Explanation:

I really hope this helps have a wonderful day

Cole drives to school from home, starting from rest and accelerating for 10 minutes as he travels 6.0 km to school.
1) What is Cole's acceleration?
2) What is his velocity when he reaches school?

Answers

Explanation:

this is the answer for your question. if you have any doubt.

you can send your doubt to:6369514784(what's app)

The noise from a power mower was measured at 104 dB. The noise level at a rock concert was measured at 121 dB. Find the ratio of the intensity of the rock music to that of the power mower.

Answers

Based on the calculations, the ratio of the intensity of Ir to Ip is equal to 50.12.

How to find the ratio of the intensity?Let the intensity of the power mower be Ip.Let the intensity of the rock music be Ir.

Mathematically, sound intensity level can be calculated by using this formula:

[tex]\beta = 10 log(\frac{I}{I_{ref}} )[/tex]

Where:

I is the intensity of the sound.

Making I the subject of formula, we have:

I = Io × [tex]10^{\frac{\beta }{10} }[/tex]

For Ip, we have:

Ip = Io × [tex]10^{\frac{104 }{10} }[/tex]

Ip = Io × [tex]10^{10.4}[/tex]

For Ir, we have:

Ir = Io × [tex]10^{\frac{121 }{10} }[/tex]

Ir = Io × [tex]10^{12.1}[/tex]

Now, we can find the ratio of the intensity:

Ir/Ip = Io × [tex]10^{12.1}[/tex]/Io × [tex]10^{10.4}[/tex]

Ir/Ip = [tex]10^{12.1}[/tex]/[tex]10^{10.4}[/tex]

Ir/Ip = [tex]10^{12.1 -10.4}[/tex]

Ir/Ip = [tex]10^{1.7}[/tex]

Ir/Ip = 50.12.

Read more on sound intensity here: https://brainly.com/question/17062836

#SPJ1

Planet-X has a mass of 4.74×1024 kg and a radius of 5870 km. The First Cosmic Speed i.e. the speed of a satellite on a low lying circular orbit around this planet is 7.34 km/s.
1. What is the Second Cosmic Speed i.e. the minimum speed required for a satellite in order to break free permanently from the planet?
2. If the period of rotation of the planet is 16.6 hours, then what is the radius of the synchronous orbit of a satellite?

Answers

10,378.82 m/s is the second cosmic speed.

69,801 km is the radius of the synchronous orbit of a satellite.

Given

Mass of planet = 4.74 × [tex]10^{24}[/tex] kg

Radius of planet = 5870 km = 5870000m

First Cosmic speed = 7.34 km/sec

1) Second cosmic speed i.e. the minimum speed required for a satellite to break free permanently from the planet is also known as the escape velocity of a satellite.

It can be calculated by

v = √2GM/r where,

v= Escape velocity of the satellite

G = Gravitational constant

M = Mass of planet

r = Radius of planet

v = √[( 2 x 6.67 x 10⁻¹¹ x 4.74 x 10²⁴) / (5870 x 10³)]

v = 10,378.82 m/s

2) Speed of the satellite at the given period

v = 2πr/T where,

T= Time period of rotation = 16.6 × 3600 seconds

r = v×T/2π

r = (7,338.93 x 16.6 x 3600 s) / (2π)

r = 69,801 km

Hence

The Second Cosmic Speed i.e. the minimum speed required for a satellite to break free permanently from the planet is 10,378.82 m/s.

And the radius of the synchronous orbit of a satellite is 69,801 km.

Learn more about cosmic speed here https://brainly.com/question/15351190

#SPJ1

QUESTION 9 / 10
What is the first step you should take when you want to open a savings account?
A. Present your photo ID to the bank representative,
B. Make your initial deposit.
C. Review the different savings account options that your
bank offers.
D. Go to the bank and fill out an application.

Answers

Answer:

A

Explanation:

AWNSER:

awnser:

C

explanation:

15 Points , Physics HW, can someone please show me step by step how to calculate percent difference for this problem. My numbers are listed in the image. Thank you so much!

Answers

The percent difference between two numbers [tex]x[/tex] and [tex]y[/tex] is given by

[tex]\dfrac{|y-x|}x \times 100\%[/tex]

The absolute value is there because we only care about the absolute percent difference, and not taking into account whether we go from [tex]x[/tex] to [tex]y[/tex] or vice versa. If we remove them, we have two possible interpretations of percent difference.

For example, the (absolute) percent difference between 3 and 6 is

[tex]\dfrac{|6-3|}3 \times 100\% = 100\%[/tex]

In other words, we add 100% of 3 to 3 to end up with 6. This is the same as the percent difference going from 3 to 6. On the other hand, the percent difference going from 6 to 3 is

[tex]\dfrac{3-6}3\times100\%=-50\%[/tex]

which is to say, we take away 50% of 6 away from 6 to end up with 3.

"Make comparisons to object measurements" tells us that the differences should be computed relative to "measurements for object". In other words, take [tex]x[/tex] from the left column and [tex]y[/tex] from the right column.

[tex]\dfrac{|7.1-7.3|}{7.1} \times 100\% \approx 2.82\%[/tex]

[tex]\dfrac{|4.8-5.0|}{4.8} \times 100\% \approx 4.17\%[/tex]

[tex]\dfrac{|7.2-7.5|}{7.2} \times 100\% \approx 4.17\%[/tex]

The percentage difference are 2.82%, 4.17%, 4.17%.

The percent difference between two numbers a and b is given by formula:

[tex]\frac{y-x}{x}*100[/tex]

We are given absolute value as we are only concerned about the absolute percent difference.

Making comparisons to object measurements determines that the differences should be computed relative to object measurements.

Here take from the left column and  from the right column.

a) [tex]\frac{7.3-7.1}{7.1} *100=2.82[/tex]%

b) [tex]\frac{5.0-4.8}{4.8} *100=4.17[/tex]%

c) [tex]\frac{7.5-7.2}{7.2} *100=4.17[/tex]%

Learn more about percentage difference click here https://brainly.com/question/27070570

#SPJ1

Plzzz help me with this
I’ll give brainliest

Answers

Answer:

(A) By reducing friction

Answer:

A

Explanation:

Select the correct answer. Which graphs show the correct relationship between kinetic energy and mass? A. Graph representing a relationship between mass on the x-axis and kinetic energy on the y-axis. the line starts at the origin and increases upwards B. Graph representing the relationship between mass on the x-axis and kinetic energy on the y-axis. the curve starts at the origin and keeps on increasing C. Graph representing a linear relationship between mass on the x-axis and kinetic energy on the y-axis D. Graph representing a relationship between mass on the x-axis and kinetic energy on the y-axis. the line starts at the origin and increases as it goes with a small bend Reset Next

Answers

C. Graph representing a linear relationship between mass on the x-axis and kinetic energy on the y-axis.

What is kinetic energy?

Kinetic energy is the energy possessed by a body due to its motion.

K.E = ¹/₂mv²

where;

m is mass of the object

The kinetic energy of a body is directly proportional to the mass of the object.

Thus, the correct relationship between kinetic energy and mass is Graph representing a linear relationship between mass on the x-axis and kinetic energy on the y-axis.

Learn more about kinetic energy here: https://brainly.com/question/25959744

#SPJ1

Which instrument would make rice vibrate easier, a tuba or a flute? Explain why. Hint: think about the difference between high and low notes in terms of vibrating atoms.

Answers

Answer:

I assume the higher notes would make the rice vibrate more easily, so a flute.

A 0.15 kg baseball collides with a 1.0 kg bat. The ball has a velocity of 40 m/s immediately before the collision. The center of mass of the bat also has a velocity of 40 m/s, but in the opposite direction, just before the collision. The coefficient of restitution between the bat and the ball is 0.50. Estimate how fast the baseball is moving as it leaves the bat following the collision.

Answers

Answer:

The final velocity of the baseball as it leaves the bat is 40 m/s

Explanation:

The given parameters of the baseball and bat are;

The mass of the baseball = 0.15 kg

The mass of the bat = 1.0 kg

The velocity of the ball before collision, v₁ = 40 m/s

The velocity of the bat before collision, v₂ = -40 m/s

The coefficient of restitution, e = 0.50

Let, 'v₃', and 'v₄' represent the final velocity of the ball and the bat respectively after collision, we have;

Taking the final velocity of the bat, v₄ = 0 m/s

According to Newton's Law of restitution

e = (v₃ - v₄)/(v₁ - v₂)

∴ 0.5 = (v₃ - v₄)/(40 - (-40))

80 × 0.5 = 40 = (v₃ - v₄)

v₃ - v₄ = 40

v₃ =  40 + v₄ = 40 + 0 = 40

The final velocity of the baseball as it leaves the bat, v₃ = 40 m/s.

1. Boron has two naturally occurring isotopes, boron-10 and boron-11. Boron-10 has a mass of 10.0129 relative to carbon-12 and makes up 19.78 percent of all naturally occurring boron. Boron-11 has a mass of 11.00931 compared to carbon-12 and makes up the remaining 80.22 percent. What is the atomic weight of boron?


2. Identify the number of protons, neutrons, and electrons in the following isotopes:
a. 147N b. 3517Cl c. 4820Ca d. 6329Cu e. 23092U


3. How many outer shell electrons are found in an atom of
a. Na? b. P? c. Br? d. I? e. Te?


4. Use the periodic table to identify if the following are metals, nonmetals, or semiconductors:
a. Radon b. Francium c. Arsenic d. Phosphorus e. Hafnium

Answers

From the calculation, the atomic weight of the boron atom is 10.812.

What is the atomic weight of boron ?

We can find the atomic weight of boron from;

(19.78/100 * 10.0129) + ( 80.22/100 * 11.00931)

= 1.981 + 8.831

= 10.812

The number of protons, neutrons, and electrons in the following isotopes are;

N - 7 electrons, 7 protons and 7 neutrons

Cl - 17 electrons, 17 protons and 18 neutrons

Ca - 20 protons, 20 electrons and 28 neutrons

Cu - 29 protons, 29 electrons and 3 neutrons

U - 92 protons, 92 electrons and 138 neutrons

The number of outer shell electrons in the atoms are;

Na - 1

P - 5

Br - 7

I - 7

Te - 6

The elements are classified as follows;

Radon - nonmetal

Francium - metal

Arsenic - semiconductor

phosphorus - nonmetal

Hafnium - metal

Learn more about the periodic table:https://brainly.com/question/11155928

#SPJ1

A car is being tested on a track. The driver approaches the test section at a speed of 28 m s−1. He then accelerates at a uniform rate between two markers separated by 100 m. The car reaches a speed of 41 m s−1.

Answers

The uniform acceleration of the car is 4.485 m/s².

Acceleration of the car

The uniform acceleration of the car is calculated as follows;

v² = u² + 2as

a = (v² - u²)/2s

where;

v is final velocity = 41 m/su is initial velocity = 28 m/ss is distance = 100 ma is acceleration = ?

a = (41² - 28²)/(2 x 100)

a = 4.485 m/s²

Thus, the uniform acceleration of the car is 4.485 m/s².

Learn more about uniform acceleration here: https://brainly.com/question/2505743

#SPJ1

Galileo _____.

did not believe friction existed

believed that friction stopped objects in motion

believed that friction kept objects in motion

assumed that in a frictionless environment objects would never move

Answers

Answer:

friction help to slow motion in other word it oppose motion, but in a frictionless environment object would move with difficult stopping point.

The solar wind consists of protons from the Sun moving toward Earth (the wind actually consists of about 95% protons). The number density of protons at a distance from the Sun equal to the orbital radius of Earth is about 7.0 protons per cubic centimeter. Your research team monitors a satellite that is in orbit around the Sun at a distance from the Sun equal to Earth's orbital radius. You are in charge of the satellite's mass spectrometer, an instrument used to measure the composition and intensity of the solar wind. The aperture of your spectrometer is a circle of radius 28.4 cm. The rate of collection of protons by the spectrometer is such that they constitute a measured current of 91.0 nA. What is the speed of the protons in the solar wind

Answers

Answer:

[tex]\mathbf{V_d = 3.2 \times 10^5 \ m/s}[/tex]

Explanation:

[tex]\text{The speed of the protons can be estimated by using the formula:}[/tex]

[tex]V_d = \dfrac{I}{enA}[/tex]

[tex]where;[/tex]

[tex]\text{e = proton charge}[/tex]

[tex]\text{n = No. of protons per unit volume}[/tex]

[tex]\text{A = area of aperture}[/tex]

[tex]V_d = \dfrac{91 \times 10^{-9} \ A}{(1.602 \times 10^{-19} \ C (7.0 \times 10^6 \ m^{-3} ) (\pi) (0.284 \ m)^2}[/tex]

[tex]\mathbf{V_d = 3.2 \times 10^5 \ m/s}[/tex]

Which element is a metalloid?

Answers

Answer:

The metalloids are located on the right side of the periodic table in a "step-like" arrangement.

All of the possible metalloids are:

boron (B), silicon (Si), germanium (Ge), arsenic (As), antimony (Sb), tellurium (Te), and polonium (Po)

A 1100-N crate rests on the floor.
1) How much work is required to move it at constant speed 5.0 m along the floor against a friction force of 310 N .
Express your answer to two significant figures and include the appropriate units.
2)
How much work is required to move it at constant speed 5.0 m vertically.
Express your answer to two significant figures and include the appropriate units.

Answers

(a) The work done in moving the crate along the floor is 7,050 J.

(b) The work done in moving the crate vertically is 0 J.

Work done in moving the crate horizontally

W = Fdcosθ

where;

F is total force to be appliedd is displacement of the crateθ is the horizontal angle = 0

W = (1100 + 310) x 5

W = 7,050 J

Work done in moving the crate vertically

W  = Fd cos(90)

W = 0

Thus, the work done in moving the crate along the floor is 7,050 J.

the work done in moving the crate vertically is 0 J.

Learn more about work done here: https://brainly.com/question/8119756

#SPJ1

Even if all stars were the same distance from Earth, their absolute magnitude and
apparent magnitude would be very different.
True
False

Answers

Answer: True


hope this helps!

A truck is carrying a refrigerator as shown in the figure. The height of the refrigerator is 158.0 cm, the width is 60.0 cm. The center of gravity of the refrigerator is 67.0 cm above the midpoint of the base.
What is the maximum acceleration the truck can have so that the refrigerator doesn't tip over? (The static friction between the truck and the refrigerator is very large.)

Answers

In order for the refrigerator not to tip over, the maximum acceleration of  1.86 m/s² must not be exceeded.

What is acceleration?

The term acceleration has to do with the rate at which velocity changes with time.

We have to take the moments at the tipping point of rotation as follows;

Clockwise moment = Anticlockwise moment

Hence;

F₂ * 1.58 m = F₁ * 0.67 m

The weight at half the width= 30 cm or 0.3 m

Height of refrigerator = 158 cm 0r 1.58 cm

Then;

m * a * 1.58 = m * 9.81 * 0.30

a = 1.86 m/s²

In order for the refrigerator not to tip over, the maximum acceleration of  1.86 m/s² must not be exceeded.

Learn more about acceleration: brainly.com/question/14344386

#SPJ1

Friction is necessary when you are on a bike to stay

Answers

Answer:

yes friction is needed hope this helps might of been to long tho

A flat, circular, steel loop of radius 75 cm is at rest in a uniform magnetic field, as shown in an edge-on view in the figure (Figure 1). The field is changing with time, according to B(t)=(1.4T)e^−(0.057s^−1)t.
a) Find the emf induced in the loop as a function of time (assume t is in seconds).
b) When is the induced emf equal to 110 of its initial value?
c) Find the direction of the current induced in the loop, as viewed from above the loop.

Answers

The solution to the questions are given as

[tex]t=40.39 \mathrm{sec}[/tex][tex]\varepsilon &=(0.12v)e^{0.057t}[/tex]the direction of induced current will be Counterclock vise.

What is the direction of the current induced in the loop, as viewed from above the loop.?

Given, $B(t)=(1.4 T) e^{-0.057 t}$

[tex]$\varepsilon m f(\varepsilon)=-\frac{d \phi_{B}}{d t}[/tex]

[tex]\quad$ and, $\phi_{B}=\int B \cdot d A=\int B \cdot d A \cdot \cos \theta$[/tex]

[tex]\begin{aligned}\text { Here, } \theta &=30^{\circ} ; \\A &=\pi r^{2} \\a n \delta, R &=0.75 \mathrm{~m} \\\therefore \varepsilon &=-\frac{d}{d t}(B A \cdot \cos \theta)=-A \cdot \cos \theta \cdot \frac{d}{d t}(B(t)) \\\therefore \varepsilon &=-\pi R^{2} \cdot \cos \theta \cdot \frac{d}{d t}\left(e^{-0.057 t}\right)(1.4 T) \\\therefore \varepsilon &=+\pi(0.75)^{2} \cdot \cos 30 \cdot(0.057)(1.4) \cdot e^{-0.057 t}\left\{\because \frac{d}{d t} e^{-x}=-x \cdot e^{-x} .\right.\end{aligned}[/tex]

[tex]\varepsilon &=(0.12v)e^{0.057t}[/tex]

(b) [tex]Here, $\varepsilon_{0}=0.12 \mathrm{~V} \quad\left(a t_{2} t=0 \mathrm{sec}\right)$[/tex]

[tex]\begin{aligned}&\therefore 1 . \varepsilon_{0}=\varepsilon_{0} \cdot e^{-e .057 t} \\&\therefore e^{0.057 t}=10 \quad \text { (taking log both thesides) } \\&\therefore 0.057 t=\ln (10)=2.303 \\&\therefore t=40.39 \mathrm{sec}\end{aligned}[/tex]

c)

In conclusion, the direction of the induced current will be Counterclockwise.

Read more about current

https://brainly.com/question/13076734

#SPJ1

Valence electron of the first 20 elements​

Answers

Answer:

Hydrogen

1 valence electron

Helium

2 valence electrons

lithium

1 valence electrons

beryllium

2 valence electrons

boron

3 valence electrons

carbon

4 valence electrons

nitrogen

5 valence electrons

oxygen

6 valence electrons

flourine

7 valence electrons

neon

8 valence electrons

sodium

1 valence electron

magnesium

2 valence electrons

aluminum

3 valence electrons

silicon

4 valence electrons

phosphorus

5 valence electrons

Answer:  17 Chlorine -1, +1, (+2), +3, (+4), +5, +7

18 Argon 0

19 Potassium +1

20 Calcium +2

Explanation:

What is the difference between the reflection and refraction of light

Answers

Answer:

Reflection can simply be defined as the reflection of light when it strikes the medium on a plane. Refraction can be defined as the process of the shift of light when it passes through a medium leading to the bending of light. The light entering the medium returns to the same direction.

Answer:

reflection is your image and refraction is light

What current is needed in the solenoid's wires?

A researcher would like to perform an experiment in a zero magnetic field, which means that the field of the earth must be canceled. Suppose the experiment is done inside a solenoid of diameter 1.0 m, length 3.8 m , with a total of 5000 turns of wire. The solenoid is oriented to produce a field that opposes and exactly cancels the 52 μT local value of the earth's field.

What current is needed in the solenoid's wires? Express your answer with the appropriate units.

Answers

Using Ampere's Law, the magnetic field produced inside this solenoid is given by
B = uo N I / h
where uo is the vacuum permeability, N is the number of turns in the solenoid and h is the length of the solenoid. Earth's magnetic field is around 50 microteslas in North America thus the current needed in the solenoid is
I = B h / (uo N) = (50 E-6 ) (4) / ((4 pi E-7)(6000) ) = 0.026 A
I = 26 mA
So you need a current of around 26 mA.

Which of the following would have the least amount of inertia? Assume all the bags are the same size.

bag of rocks

bag of feathers

bag of bricks

bag of sand

Answers

Bag of feathers because it weighs the least

What is the Difference between accuracy and precision ?

Answers

Answer:

Accuracy measures how close results are to the true or known value. Precision, on the other hand, measures how close results are to one another.

Accuracy means the state of being accurate, without any mistakes and the results should be 100% true.

Whereas, precision means, approximately true or almost true.

Hope it help you

Earth’s atmosphere traps energy from the sun. Which is a direct result of the trapping of energy by Earth’s atmosphere?

Answers

Answer:

Earth's atmosphere traps energy from the sun. Which is a direct result of the trapping of energy by earth's atmosphere? Earth has moderate temperatures.

Explanation:

A random selection of volunteers at a research institute has been exposed to a weak flu virus. After the volunteers began to have flu symptoms, of them were given multivitamin tablets daily that contained gram of vitamin C and grams of various other vitamins and minerals. The remaining volunteers were given tablets containing grams of vitamin C only. For each individual, the length of time taken to recover from the flu was recorded. At the end of the experiment the following data were obtained. Days to recover from flu Treated with multivitamin , , , , , , , , , Treated with vitamin C , , , , , , , , , Suppose that it is known that the population standard deviation of recovery time from the flu is days when treated with multivitamins and that the population standard deviation of recovery time from the flu is days when treated with vitamin C tablets. Suppose also that both populations are approximately normally distributed. Construct a confidence interval for the difference between the mean recovery time when treated with multivitamins () and the mean recovery time when treated with vitamin C only (). Then find the lower limit and upper limit of the confidence interval.

Answers

The confidence interval is given as lower interval is -0.77 while The upper interval is 1.67

How to solve for the confidence interval

Multivitamin treatment

n1 is 10

σ1 = 1.8

x21 = 5

vitamin C treatment

n2 = 10

σ2 = 1.5

x2 = 4.55

zα/2 = 1.645

The formula for the confidence interval is given as

(x1 - x2) ± zα/2[tex]\sqrt{\frac{sd1^2}{n1}+\frac{sd2^2}{n2} }[/tex]

When we input the values we have above we would have

CI = (-0.7688550 , 1.668855 )

The the lower interval is -0.77

The upper interval is 1.67

Read more on confidence interval here:

https://brainly.com/question/2141785

#SPJ1

Complete question

A random selection of volunteers at a research institute has been exposed to a weak flu virus. After the volunteers began to have flu symptoms, 10 of them were given multivitamin tablets daily that contained 1 gram of vitamin C and 3 grams of various other vitamins and minerals. The remaining 10 volunteers were given tablets containing 4 grams of vitamin C only. For each individual, the length of time taken to recover from the flu was recorded. At the end of the experiment the following data were obtained:

Treated with multivitamin

Days to recover from flu

2.4, 6.4, 9.1, 4.1, 4.6, 6.4, 6.4, 3.2, 6.9, 0.5

Treated with Vitamin C

5.2, 3, 3.6, 5.5, 7.5, 6.7, 1.3, 1.9, 5.3, 5.5

Suppose that it is known that the population standard deviation of recovery time from the flu is 1.8 days when treated with multivitamins and that the

population standard deviation of recovery time from the flu is 1.5 days when treated with vitamin C tablets. Suppose also that both populations are

approximately normally distributed. Construct a 90% confidence interval for the difference µµ₂ between the mean recovery time when treated with

multivitamins (μ,) and the mean recovery time when treated with vitamin C only (H2). Then complete the table below.

Carry your intermediate computations to at least three decimal places. Round your answers to at least two decimal places. (If necessary, consult a list of formulas.)

What is the lower limit of the 90% confidence interval?

What is the upper limit of the 90% confidence interval?

Determine the voltage Vab for the first circuit and also determine the voltages Vab and Vcd for the second circuit

Answers

Vab= E = 20V

because I = 0 and the voltage drop across the resistances R1 and R2 is also 0.

Second circuit:

Vab = 10V (no voltage drop across R1)

Vcd= E2-E1 = 20V

Series connection of voltage sources. But the sources are connected to the contrary and voltage drop across R1 or R2 is 0 V.

Other Questions
true or false: firms are increasingly turning to the global capital market to finance their investments since the global capital market offers a lower cost of capital than the domestic capital market. republicans argue that labor demand is ________, so ________ jobs will be lost when the minimum wage is raised: a. elastic; many. b. elastic; few. c. inelastic; few. d. inelastic; many. The bank can advance 65 to 80 percent of the value as soon as the goods are shipped.Real estateInsurance policiesAccounts receivableEquipment it is important for the rnfa to be aware of a potential esu safety hazard when assisting with endoscopic surgery. choose from the following a potential safety hazard. write a story to illustrate the saying half a loaf is better than none explain why it is important to reduce the dimension and remove irrelevant features of data (e.g., using pca) for instance-based learning such as knn? (5 points) Goods that have been started in the manufacturing process but are not yet complete are included in the A. Raw Materials Inventory account B. Cost of Goods Sold account C. Finished Goods Inventory account D. Work-in-Process Inventory account the budget for a project on voting trends includes $ for hiring undergraduate students, graduate students, and faculty members to conduct interviews on the day before an election. each undergraduate student will conduct interviews for $100. each graduate student will conduct interviews for $150. each faculty member will conduct interviews for $200. no more than interviewers can be hired. how many of each type of interviewer should be hired in order to maximize the number of interviews? what is the maximum number of interviews? The following countries as a group represent the most important markets for U.S. agricultural exports:A. Developed countriesB. Centrally planned countriesC. Developing countriesD. Former Soviet Union members is the following an example of expansionary fiscal policy or an example of an automatic stabilizer? ""the government paid an extra $25 million in unemployment claims last month."" Plastic Pretzels stock recently paid a dividend of $1.31 per share. The dividend growth rate is expected to be 6.00% indefinitely. Stockholders require a return of 12.80% on this stock. What is the current intrinsic value of Plastic Pretzels stock? What would you expect the price of this stock to be in one year if its current price is equal to its intrinsic value If you were to buy Plastic Pretzels stock now and sell it after receiving the dividend one year from now, what would be your holding period return (HPR)? If you are able to purchase the stock for $17.70 instead of its intrinsic value today, what would be the holding period return? when testing the perceptual effects of music training, why should a researcher use random assignment of participants to a musical group or control activity? the time it takes to pass legislation to implement a particular policy is called harmful behaviors that are maladaptive, unjustifiable, disturbing, and atypical are called: which era was known for full-length secular plays called comedias .f bolt thread length is normally distributed, what is the probability that the thread length of a randomly selected bolt is (a) Within 1.9 SDs of its mean value? (Round your answer to four decimal places.) (b) Farther than 2.4 SDs from its mean value? (Round your answer to four decimal places.) (c) Between 1 and 2 SDs from its mean value? (Round your answer to four decimal places.) which of the following is most likely to use dream analysis when conducting psychotherapy? question 1 options: a behavioral psychologist a psychodynamic oriented psychologist a cognitive psychologist A password that uses uppercase letters and lowercase letters but consists of words found in the dictionary is just as easy to crack as the same password spelled in all lowercase letters. True or False? What is the gravitational potential energy of uranus due to the sun? assume muranus = 8.6810^25 kg , msun = 2.0 1030 kg , and the orbital distance is r = 2.8810^9 km . why do you think that some studies are replicable while others are not? make specific references to the findings discussed in the replication quiz above. when you correctly guessed a finding that was replicated, what made you think it was replicable? when you correctly guessed that a finding was not replicated, what tipped you off? if you were a journal editor, what changes might you make to your decision-making due to the replication crisis?