Answer:
1995 and 2000 , 4 trillions
Explanation:
Answer:
1995 and 2000.4 trillion
Explanation:
Edge 2021
12) A negatively-charged balloon touching a wooden wall
A) pulls positive charge on the wall surface toward it.
B) pushes negative charge in the wall away from it.
C) polarizes molecules in the wall.
D) all of the above.
Answer:
D) all of the above.
Explanation:
First polarises it, cahrging and discharging occurs at once.
A negatively charged balloon touching a wooden wall then from the given options option D is correct which is all of the above.
What is a charge?Charged matter experiences a force when it is exposed to an electromagnetic field due to the physical property of electric charge. Positive or negative charges can exist in an electric field (commonly carried by protons and electrons, respectively).
Contrary charges attract one another, while like charges repel one another. A neutral object is one that carries no net charge. Classical electrodynamics, the name given to an early understanding of how charged particles interact, is still accurate for issues that do not call for taking into account quantum phenomena.
In the first step it polarizes molecules in the wall, then charging and discharging in the wall will take place at once.
To get more information about Charge :
https://brainly.com/question/19886264
#SPJ2
an object falls freely from rest the total distance covered by it in 2s will be
Answer:
Distance, S = 19.6 meters
Explanation:
Given the following data;
Time = 2 seconds
We know that acceleration due to gravity is equal to 9.8 m/s².
Also, the initial velocity of the object is equal to zero because it's starting from rest.
To find the total distance covered by the object, we would use the second equation of motion;
[tex] S = ut + \frac {1}{2}at^{2}[/tex]
Where;
S represents the displacement or height measured in meters. u represents the initial velocity measured in meters per seconds. t represents the time measured in seconds. a represents acceleration measured in meters per seconds square.Substituting into the equation, we have;
[tex] S = 0*2 + \frac {1}{2}*(9.8)*2^{2}[/tex]
[tex] S = 0 + 4.9*4[/tex]
[tex] S = 4.9*4 [/tex]
Distance, S = 19.6 meters
Therefore, the total distance covered by the object is 19.6 meters.
A ball is hit at an angle of 300. At what point in its trajectory does this
projectile have the least speed?
A. Just after it was launched.
B. At the highest point in its flight.
C. Just before it hits the ground.
D. Midway between the ground and the highest point.
A ball is thrown horizontally with a speed of 4.0 m/s from a height of 60.0
meters. What is the range of the projectile?
A. 4.00 m
B. 14.0 m
C. 24.0 m
D. 34.0 m
Which has constant velocity?
A.Range
B.Trajectory
C.Projectile
D.Vertical or Horizontal Velocity
Answer:
C. At the highest point of flight.
Explanation:
Given data;
[tex]u_{x} = 4 m/s ,u_{y} = 0, h = 60 m[/tex]
Time of flight,
by third equation of motion ,
[tex]h=\frac{1}{2} gt^{2}[/tex]
[tex]t=\sqrt{\frac{2*60}{9.8} }[/tex]
[tex]t = 3.5 Sec[/tex]
so the range ,
by horizontal component of velocity,([tex]u_{x}[/tex])
R = 4X3.5
R = 14 m
Horizontal component of velocity remain constant in the entire motion.
The brachialis attaches to the forearm .035 m from the elbow at an angle of 32 deg. If the brachialis produces 750 N of force, what is the magnitude of the stabilizing component of the brachialis force
Answer:
[tex]XY=636N[/tex]
Explanation:
From the question we are told that:
Distance [tex]d=0.35m[/tex]
Angle [tex]\theta=32\textdegree[/tex]
Force [tex]F=750N[/tex]
Generally the equation for magnitude of the stabilizing component of the brachialis force is mathematically given by
[tex]XY=Fcos\theta[/tex]
[tex]XY=750cos 32\textdegree[/tex]
[tex]XY=636N[/tex]
If you wanted to know how much the temperature of a particular piece of material would rise when a known amount of heat was added to it, which of the following quantities would be most helpful to know?
a. coefficient of linear expansion
b. specific heat
c. initial temperature
d. thermal conductivity
e. density
Answer:
Option (b) is correct.
Explanation:
The amount of heat required to raise the temperature of substance of mass 1 kg by 1 degree C, is called specific heat of the substance.
The formula of the specific heat is
H = m c (T' - T)
where, m is the mass, c is the specific heat and T' - T is the change in temperature.
So, to know the rise in temperature, by adding the known amount of heat, the specific heat is required.
So, option (b) is correct.
What is the current in the 30 resistor?
A. 0.0833 A
B. 12 A
C. 2 A
D. 10 A
Answer:
Explanation:
Step 1) Combine all resistors into an equivalent overall resistor. These are all in series so you just add them up. Req = 10Ω + 20Ω + 30Ω = 60Ω:
Step 2) Using Ohm's Law, I = V/R = 120/60 = 2 A
Now you know how much current is flowing, and that current flows through each resistor the same. So the current in the 30 Ω resistor is 2.00 amps.
While a mason was working concrete into formwork, the formwork collapses. Who is BEST suites to rectify this problem? Mason Carpenter Project Manager O Construction Technician A device made in a workplace had defects. To address this issue the workshop manager should communicate directly with the workshop
Answer:
1. Carpenter
2. True
Explanation:
While a mason was working concrete into the formwork, the formwork collapses. The best person to rectify this problem is CARPENTER.
This is because it is the job of the Carpenter to design and build formwork, most especially wooden formwork. Formwork is like casing built to receive concrete and reinforcement during construction. Hence, when formwork collapses either due to stress, tension, or improper construction, it is the job of Carpenter to reconstruct the formwork or rectify the problem.
It is TRUE that when a device made in a workplace had defects. To address this issue the workshop manager should communicate directly with the workshop. However, this communication will be an instruction on what to do next, and it usually directs those responsible to take action where necessary. For example, a workshop manager communicates to a carpenter about the need to rectify a chair or table that has a defect.
A temperature of 200 degrees Fahrenheit is equivalent to approximately A.93.3 degrees Celsius B. 232 degrees Celsius C. 37.8 degrees Celsius D. 840 degrees Celsius
Answer:
you can use G.oogle for this question.
Answer:
93.3 degrees Celsius.
Explanation:
Alcohol consumption slows people's reaction times. In a controlled government test, it takes a certain driver 0.320 s to hit the brakes in a crisis when unimpaired and 1.00 s when drunk. The car is initially traveling at 110.0 km/h. 1) How much farther does the car travel before coming to a stop when the person is drunk compared to sober
Answer:
[tex]\triangle d=21.726m[/tex]
Explanation:
From the question we are told that:
Unimpaired time to hit break [tex]t_i=0.320s[/tex]
Drunk time [tex]t=1s[/tex]
Initial Velocity [tex]v=110km/h[/tex]
Generally the equation for Average velocity is mathematically given by
[tex]V_{avg}=\frac{\triangle d}{\triangle t}[/tex]
Therefore
[tex]\triangle d=v.dt[/tex]
[tex]\triangle d=31.95*(1-0.32)[/tex]
[tex]\triangle d=21.726m[/tex]
Two skaters, both of mass 75 kg, are on skates on a frictionless ice pond. One skater throws a 0.4-kg ball at 6 m/s to his friend, who catches it and throws it back at 6.0 m/s. When the first skater has caught the returned ball, what is the velocity of each of the two skaters
Answer:
v = 0.064 m/s
Explanation:
Given that,
The mass of two skaters = 75 kg
The mass of a ball = 0.4 kg
The speed of the ball = 6 m/s
The speed of skater = 6 m/s
We need to find the velocity of each of the two skaters.
Under the values given the moment with respect to the ball and which is subsequently transmitted to people it would be given by:
[tex]P=0.4(6)+0.4(6)\\\\=4.8\ kg-m/s[/tex]
We know that,
P = mv
Where
v is the velocity of each skater.
[tex]v=\dfrac{p}{m}\\\\v=\dfrac{4.8}{75}\\\\=0.064\ m/s[/tex]
So, the velocity of each of the skaters is 0.064 m/s.
Một mol khí đang ở điều kiện tiêu chuẩn thì bị nén váo một bình 5 lít. Nhiệt độ khí trong bình là 770 C. Tính áp suất khí?
Đáp án:
p=5,74atm
Giải thích các bước giải:
áp suất khí là:
pV=nRT⇒p=nRTV=1.0,082.(77+273)5=5,74atmpV=nRT⇒p=nRTV=1.0,082.(77+273)5=5,74atm
p=5,74atm
Giải thích các bước giải:
áp suất khí là:
pV=nRT⇒p=nRTV=1.0,082.(77+273)5=5,74atmpV=nRT⇒p=nRTV=1.0,082.(77+273)5=5,74atm
Which best describes velocity?
A. 15 miles an hour
B. 15 miles an hour going west.
C. Speeding up from 10 to 15 miles an hour.
D. Going 15 miles an hour for 2 hours.
Answer:
B. 15 miles an hour going west
planet smaller than earth but larger than mercury
Answer:
venus......................
What do we mean by a penetrative pass in the game of football?
Answer:
Penetration means forward passes can go through the opposition lines. Once these penetrative passes get through each line, it eliminates the line of players it broke through and leaves the player in possession closer to the opposition goal.
Explanation:
2. When you increase your speed from 35 mph to 70 mph, the force of impact you experience will be increased: A. 2 times B. 4 times C. 5 times D. 7 times
When you increase your speed from 35 mph to 70 mph, the force of impact you experience will be increased 4 times.
Hence, the correct option is B.
The force of impact in a collision is directly proportional to the square of the velocity. When the speed is doubled (increased from 35 mph to 70 mph), the force of impact will increase by a factor of four ([tex]2^2[/tex]). This is a fundamental concept in physics known as the kinetic energy formula, which is given by:
Kinetic Energy = (1/2) * mass * [tex]velocity^2[/tex]
Since kinetic energy is directly proportional to the square of velocity, doubling the speed results in four times the kinetic energy and, consequently, four times the force of impact.
Therefore, When you increase your speed from 35 mph to 70 mph, the force of impact you experience will be increased 4 times.
Hence, the correct option is B.
To know more about speed here
https://brainly.com/question/17661499
#SPJ2
44. Water from a fire hose knocks over a wooden shed. Compared with the pressure within the water, the pressure exerted against the shed is
a) less.
b) the same.
c) more.
d) nonexistent.
ADvantage of friction
Answer:
1. Friction enables us to walk freely.
2. It helps to support ladder against wall.
3. It becomes possible to transfer one form of energy to another.
4. Objects can be piled up without slipping.
PLEASE HELP How does an object move when it is in linear motion?
in a straight line
up and down
in a circle
to the left
Answer:
In linear motion, the directions of all the vectors describing the system are equal and constant which means the objects move along the same axis and do not change direction. Correct Answer: In a straight line
Explanation:
Answer:
In a straight line. we can also have translational motion which is also a kind of linear motion .
The first and second coils have the same length, and the third and fourth coils have the same length. They differ only in the cross-sectional area. According to theory, what should be the ratio of the resistance of the second coil to the first coil and the fourth coil to the third
Answer:
The ratio of the resistances of second coil to the first coil is the ratio of square of radius of the first coil to the square of radius of second coil.
And
The ratio of the resistances of fourth coil to the third coil is the ratio of square of radius of the third coil to the square of radius of fourth coil.
Explanation:
The resistance of the coil is directly proportional to the length of the coil and inversely proportional to the area of coil and hence inversely proportional to the square of radius of the coil.
So, the ratio of the resistances of second coil to the first coil is the ratio of square of radius of the first coil to the square of radius of second coil.
And
The ratio of the resistances of fourth coil to the third coil is the ratio of square of radius of the third coil to the square of radius of fourth coil.
plsss help me
thank you very much
Guys please help me
Answer:
1)[tex]t=2.26\: s[/tex]
2)[tex]S=33.9\: m[/tex]
3)[tex]v=26.77\: m/s[/tex]
4)[tex]\alpha=55.92[/tex]
Explanation:
1)
We can use the following equation:
[tex]y_{f}=y_{0}+v_{iy}t-0.5*g*t^{2}[/tex]
Here, the initial velocity in the y-direction is zero, the final y position is zero and the initial y position is 25 m.
[tex]0=25-0.5*9.81*t^{2}[/tex]
[tex]t=2.26\: s[/tex]
2)
The equation of the motion in the x-direction is:
[tex]v_{ix}=\frac{S}{t}[/tex]
[tex]15=\frac{S}{2.26}[/tex]
[tex]S=33.9\: m[/tex]
3)
The velocity in the y-direction of the stone will be:
[tex]v_{fy}=v_{iy}-gt[/tex]
[tex]v_{fy}=0-(9.81*2.26)[/tex]
[tex]v_{fy}=-22.17\: m/s[/tex]
Now, the velocity in the x-direction is 15 m/s then the velocity will be:
[tex]v=\sqrt{v_{x}^{2}+v_{fy}^{2}}=\sqrt{15^{2}+(-22.17)^{2}}[/tex]
[tex]v=26.77\: m/s[/tex]
4)
The angle of this velocity is:
[tex]tan(\alpha)=\frac{22.17}{15}[/tex]
[tex]\alpha=tan^{-1}(\frac{22.17}{15})[/tex]
[tex]\alpha=55.92[/tex]
Then α=55.92° negative from the x-direction.
I hope it helps you!
8 points)Antireflection coating can be used on the eyeglasses to reduce the reflection of light: a) A 100nm thick coating is applied to the lens. What must be the coating’s index of refraction to be most effective at 500nm? (Assume the coating index of refraction is less than that of the lens). b) If the index of refraction of the coating is 1.20, find the necessary thickness of the coating at 500nm.
Answer:
- the coating’s index of refraction is 1.25
- the required thickness is 104.1667 nm
Explanation:
Given the data in the question;
Thickness of coating t = 100 nm
wavelength λ = 500nm
we know that refractive index is;
t = λ/4n
make n, the subject of formula
t4n = λ
n = λ / 4t
we substitute
n = 500 / ( 4 × 100 )
n = 500 / 400
n = 1.25
Therefore, the coating’s index of refraction is 1.25
2)
given that;
Index of refraction of the coating; n = 1.20
λ = 500 nm
thickness of coating t = ?
t = λ / 4n
we substitute
t = 500 / ( 4 × 1.2 )
t = 500 / 4.8
t = 104.1667 nm
Therefore, the required thickness is 104.1667 nm
63 km/h is equal to...
O a) 27.5 m/s
b) 18 m/s
c) 1.75 m/s
d) 1.8 m/s
please hurry
Answer:
17.5 m/s
Explanation:
Refer to the attachment!~
A uniform electric field is oriented in the −x direction. The magnitude of the electric field is 6500 N/C. How will the equipotential surfaces associated with this electric field be oriented?
hoW DO YOU SPELL THIS?
Answer:
Spell what?
Can u please mention that too?
Answer:
what
Explanation: how do you spell what please include this in your next post
CR Physical Science B (GP) 20-21 / 1 Motion
1. A distance-time graph indicates that an object travels 2 m in 2 s and then travels another 80 m during the next 40 s.
What is the average speed of the object?
O 4 m/s
O
2 m/s
O 8 m/s
10 m/s
Answer:
Average speed = total distance traveled / total time traveled
V = (2 + 80) / (2 + 40) = 82 / 42 = 2 m / s
A 2.5-kg rock is dropped off a 32-m cliff and hits a spring, compressing it 57 cm. What is the spring constant? Round your answer to two significant figures.
The spring constant, k, is
StartFraction N over m EndFraction.
Answer: 4800 N/m
Explanation:
Given
mass of rock [tex]m=2.5\ kg[/tex]
Height of cliff [tex]h=32\ m[/tex]
compression in the spring [tex]x=57\ cm[/tex]
Here, potential energy is converted into kinetic energy which in turn converts to elastic potential energy of the spring
[tex]\Rightarrow mgh=\dfrac{1}{2}kx^2\\\\\Rightarrow k=\dfrac{2mgh}{x^2}\\\\\Rightarrow k=\dfrac{1568}{0.3249}\\\\\Rightarrow k=4826.100\approx 4800\ N/m[/tex]
Answer:
480
Explanation:
2021
What is the change in internal energy if 70 J of heat is added to a system and
the system does 30 J of work on the surroundings. Uze al-Q-W.
O A. 40 J
O B. -40.3
O C. 100.
D. -1003
Answer:
A. 40 J
Explanation:
Given;
heat added to the system, Q = 70 J
work done by the system, W = 30 J
The change in the internal energy of the system is calculated using the first law of thermodynamic as shown below;
ΔU = Q - W
ΔU = 70 J - 30 J
ΔU = 40 J
Therefore, the change in the internal energy of the system is 40J
kinetic energy of an object is quadrupled, momentum will change by what factor?
Answer:
So as KE becomes 4times , Momentum will increase by 2 times.
A jet is circling an airport control tower at a distance of 15.8 km. An observer in the tower watches the jet cross in front of the moon. As seen from the tower, the moon subtends an angle of 9.21x10-3 radians. Find the distance traveled (in meters) by the jet as the observer watches the nose of the jet cross from one side of the moon to the other.
Answer:
The Distance traveled (in meters) by the jet as the observer watches the nose of the jet cross from one side of the moon to the other.
=145.5m
Explanation:
The radius of the circling jet r = 15.8km = 15.8*10^3 m
the angle subtended by moon
θ = 9.21*10^-3 rad
Therefore, the distance traveled by jet is
s = rθ
= (15.8*10^3 m)(9.21*10^-3 )
= (15,800)(0.00921)
=145.5m