The correct condensed structure of hexene is CH₃CH₂CH=CHCH₂CH₃.
A condensed structural formula also termed as semi-structural formula and it is used to describe the organic compounds in a line of text. They will be illustrated in a single line of text and specifies the atoms in the order which are located in a molecule.
Hexene is a hydrocarbon having chemical formula C₆H₁₂. It s used as a comonomer in the production of the polyethylene. There are several number of isomers in hexene, depending on the geometry and position of the double bond in the chain. One of the most common useful of isomers is 1-hexene as well as an alpha-olefin.
To know more about hexene here
https://brainly.com/question/13840964
#SPJ4
The elements of the group IA are termed as alkali metals, because their ___ are alkaline.
The answer is hydroxides.
The elements of the group IA are termed as alkali metals, because their hydroxides are alkaline.
If the dissociation constant of a weak acid is 7.1 x 10-5, at what ratio should you adjust the concentration of the weak acid and its conjugate base in order to prepare a buffer that has a pH of 4.15
To learn more about pH buffer please visit -https://brainly.com/question/14748181
#SPJ4
It is a long tube-like canal ,also called alimentary canal where digestion take place.
Explanation:
The alimentary canal is the long tube of organs - including stomaches and intestines
Answer: digestive strat.
HOPE IT HELPS.
PLEASE MARK ME AS BRAINLIEST.
A balloon contains a 10% glucose solution. The balloon is permeable to water but not to glucose. A beaker contains a 5% glucose solution. What will happen when the balloon is submerged in the beaker
The state of the balloon:
When the balloon is submerged in the beaker, the amount of water in the beaker will get reduced.
What is Osmosis:
Based on the concentration of solutes on both sides of the membrane, water will flow through a permeable membrane in a specific direction.
Hypertonic solution:
It means that there are more solutes present in the surrounding environment than in the cell itself.
Hypotonic solution:
In a hypotonic solution, the concentration of solutes inside the cell is higher than that outside the cell.
When comparing two solutions, the one with the larger solute concentration is hypertonic, and the one with the lower solute concentration is hypotonic. Isotonic solutions have an identical solute concentration.While the solution in the beaker is hypertonic, Meaning that will draw water molecules out of the cell. As water molecules move from a location of high water potential (dilute solution) to a region of reduced water potential (10% glucose solution), the water from the 5% glucose solution will flow into the 10% one (concentrated solution)This is the reason why the amount of water decreases when the balloon is submerged in the beaker.Learn more about the glucose solution and permeability here,
https://brainly.com/question/14748422
#SPJ4
5.690x10^3 miles to meters and give sig figs
Please help!
The equivalent of 5.690 × 10³ miles in metres is 9157167 metres. Details about metres and miles can be found below.
How to convert miles to metres?Miles and metres are both units for measuring distance between two bodies or locations.
However, they can be converted interchangeably as follows:
1 mile = 1609.34 metres
According to this question, 5.690 × 10³ miles can be converted to metres as follows;
5.690 × 10³ × 1609.34 = 9157167 metres.
Therefore, the equivalent of 5.690 × 10³ miles in metres is 9157167 metres.
Learn more about miles and metres at: https://brainly.com/question/23959651
#SPJ1
A chemist develops a medicine
to help patients with thyriod
problems. In which branch of
chemistry is this chemist
working.
Answer:
Medicinal Chemistry
Explanation:
Medicinal Chemistry deals with the development, design and production of medicines.
Hope it helps!
Have a nice day:)
When 3-methyl-2-butanone undergoes a baeyer-villiger oxidation reaction, the product is:_____.
When 3-methyl-2-butanone undergoes a baeyer-villiger oxidation reaction, the product is isopropyl acetate and methyl isobutyrate.
The Baeyer-villiger oxidation would seem to be a chemical reaction that uses peroxy acids using peroxides as the oxidant to transform a ketone into an ester or a lactone from such a cyclic ketone.
The main product produced by the Baeyer-Villiger oxidation of camphor using m-CPBA in buffer conditions could be created as a result of the migration of a tertiary bridgehead carbon as opposed to a methylene group.
By the reaction between 3-methyl-2-butanone with m-CPBA , will form isopropyl acetate and methyl isobutyrate.
It reaction can be shown as:
Therefore, when 3-methyl-2-butanone undergoes a Baeyer-villiger oxidation reaction, the product is isopropyl acetate and methyl isobutyrate.
To know more about Baeyer-villiger oxidation
https://brainly.com/question/17132143
#SPJ4
What is δs° for the reaction so2(s) no2(g) → so3(g) no(g)? substance s°(j/k • mol) so2(g) 248.5 so3(g) 256.2 no(g) 210.6 no2(g) 240.5
The value of ΔS° for reaction is - 22.2 J/K.mol
[tex]SO_{2}(s)+NO_{2} (g)[/tex] → [tex]SO_{3}(g)+NO(g)[/tex]
Calculation,
Given value of S°(J/K.mol) for
[tex]SO_{2}(s)[/tex] = 248.5
[tex]NO_{2} (g)[/tex] = 240.5
[tex]NO(g)[/tex] = 210.6
[tex]SO_{3}(g)[/tex] = 256.2
Formula used:
ΔS° (Reaction) = ∑S°(Product) - ∑S°(Reactant)
ΔS° = (256.2 + 210.6 ) - ( 248.5 + 240.5) = 466.8 - 489 = - 22.2 J/K.mol
The change in stander entropy of reaction is - 22.2 J/K.mol. The negative sign indicates the that entropy of reaction is decreases when reactant converted into product.
learn about reaction
https://brainly.com/question/3664113
#SPJ4
The half-life of silicon-32 is 710 years. If 40 grams is present now, how much will be present in 800 years
18 g of silicon-32 will be present in 800 years.
A radioactive half-life refers to the amount of time it takes for half of the original isotope to decay and it's given by
[tex]N(t) = N_0 (\frac{1}{2}) ^\frac{t}{t_\frac{1}{2} }[/tex]
where,
[tex]N(t) =[/tex] quantity of the substance remaining
[tex]N_0 =[/tex] the initial quantity of the substance
[tex]t =[/tex] time elapsed
[tex]t_1_/_2 =[/tex] the half-life of the substance
From the given information we know:
The initial quantity of silicon-32 is 40 g.
The time elapsed is 800 years.
The half-life of silicone-32 is 710 years.
So, using the calculation above, we can determine how much silicon-32 is left.
[tex]N(t) = 40 (\frac{1}{2}) ^\frac{800}{710} \\N(t) = 40 (\frac{1}{2}) ^\frac{80}{71} \\\\N(t) = 18 g[/tex]
Therefore,18 g of silicon-32 will be present in 800 years.
Learn more about half-life here:
https://brainly.com/question/25750315
#SPJ4
What type of polymer is alginic acid? Which two modified carbohydrate units make up the basic building block of this polymer?
An alginic acid is bio polymer. The two modified carbohydrate units make up the basic building block of this polymer are guluronic acid ( G) and mannuronic acid (M).
Alginic acid is a biopolymer formed from chain of polyuronic acid. Alginic acid is polysaccharide found in brown algae. Alginic acid is also known as Algin. it is linear co-polymer.
Polysaccharides are found in the food and it is most abundant carbohydrates. It is long chains of monosachharides. Polysaccharides is formed by glycosidic linkage or bonds .
Example of polysaccharides are cellulose , starch , glucogen.
lern about polysaccharide
https://brainly.com/question/780562
#SPJ4
6. which metal will not be able to be oxidized by any of the other metals listed?
Metal that won't be oxidized:
Metal that will not be able to oxidize by any of the other metals is gold.
What causes oxidation to happen?
This chemical reaction might take place in the air or after the metal has been in contact with acids or water. The most prevalent example is corrosion of steel, which occurs when the iron molecules on the surface of steel change into iron oxides, most frequently Fe2O3 and Fe3O4.
If you've ever seen a rusted-out vehicle or corroded metal bits, you've witnessed oxidation in action.
Metals that don't oxidize:
In their native condition, noble metals like platinum or gold resist oxidation. Ruthenium, rhodium, palladium, silver, osmium, and iridium are more examples of these metals. Humans have developed a wide variety of corrosion-resistant alloys, including brass and stainless steel.
Learn more about metals here,
https://brainly.com/question/2166723
#SPJ4
The soft ionization technique that uses a UV-absorbing compound upon which the analyte of interest is placed and eventually vaporized into a plume of ions directed into the mass analyzer is
The soft ionization technique that uses a UV-absorbing compound upon which the analyte of interest is placed and eventually vaporized into a plume of ions directed into the mass analyzer is matrix-assisted laser desorption ionization.
What is Soft ionization technique ?
Soft Ionizer produces less fragment ions. Soft ionizer produce the molecular ions or a quasi molecular ion. This technique not fragment the macromolecules into the more smaller charged particles.
Thus from the above conclusion we can say that The soft ionization technique that uses a UV-absorbing compound upon which the analyte of interest is placed and eventually vaporized into a plume of ions directed into the mass analyzer is matrix-assisted laser desorption ionization.
Learn more about the UV- Absorbing compound here: https://brainly.com/question/26498525
#SPJ4
Which is a type of star system?
hope my answer is useful..hope my answer is useful..
A sample of air at room temperature in a 4.00 L container holds approximately 0.562 moles of O2and 2.11 moles of N2 along with other trace elements to total 2.67 moles. What is the mole fraction of N2 in the mixture
Taking into account the definition of mole or molar fraction, the mole fraction of N₂ in the mixture is 0.79.
Molar fractionThe molar fraction is used to express the concentration of a solute in a solution and expresses the proportion in which a substance is found with respect to the total moles of the solution, which are calculated by adding the moles of solute(s) and solvent.
The mole fraction "x" of the elements in a compound is defined as a ratio between the number of moles of each of the different elements present in the compound and the total number of moles of them:
x=number of moles of the solute÷ total number of moles
Mole fraction of N₂ in the mixtureIn this case, you know that:
number of moles of N₂: 2.11 molestotal number of moles: 2.67 molesReplacing in the definition of mole fraction:
x=2.11 moles÷ 2.67 moles
Solving:
x= 0.79
Finally, the mole fraction of N₂ in the mixture is 0.79.
Learn more about mole fraction
brainly.com/question/14434096
brainly.com/question/10095502
#SPJ1
Experiment 1: in the synthesis reaction, the white powder produced is magnesium oxide (mgo, mm = 40.3 g/mol). how many moles (n) of magnesium oxide were formed? select the closest answer.
1.98 moles of Magnesium oxide were formed.
What is Balanced Chemical Equation ?The balanced chemical equation is the equation in which the number of atoms on the reactant side is equal to the number of atoms on the product side in an equation.
Now write the balanced chemical equation
2Mg + O₂ → 2MgO
(2 × 24) 2 × (24 + 16)
48 g of Mg gives 80 g of MgO
How to find the number of moles ?To find the number of moles use the expression
Number of moles = [tex]\frac{\text{Given mass}}{\text{Molar mass}}[/tex]
= [tex]\frac{80}{40.3}[/tex]
= 1.98 mole
Thus from the above conclusion we can say that 1.98 moles of Magnesium oxide were formed.
Learn more about the Balanced Chemical Equation here: brainly.com/question/26694427
#SPJ1
The combustion of hydrogen gas releases 286 kJ per mol of hydrogen. If 13.0 L of hydrogen at STP was burned to produce electricity, how long would it power a 100-watt (W) light bulb
Combustion of hydrogen produces electricity:
It would power a 100-watt (W) light bulb in 27.66 min.
Calculation:
At STP conditions, we know that 1 mole of any gas is contained in 22.4L.
So let's make the operation:
The volume of one mole of gas at STP is 22.4 L
Then, 13.0 L may be the volume for (13.0) /22.4 = 0.58 moles.
The total energy is released = 0.58 x 286 kJ
Total energy = 165.98 kJ
Energy = Power x time
Time = energy / power
where power = 100W = 100 J/s
Therefore, Time = 165.98 kJ/ 100J/s = 1659.8 sec
Time = 1659.8 sec / 60 min = 27.66 min
∴ Time = 27.66 min
Learn more about combustion here,
https://brainly.com/question/13746752
#SPJ4
What is the de broglie wavelength of an electron (m = 9. 11 × 10-31 kg) moving at a velocity of 3. 0 × 107 m/s?
the de Broglie wavelength of the electron moving at a velocity of 3. 0 × 107 m/s is 2.4×10∧-11nm
lambda = h/mv
The de Broglie wavelength is defined as follows: lambda = h/mv, wherein the greek letter lambda represents the wavelength, h is Planck's consistent, m is the particle's mass and v is its pace. One may also explicit mv as the particle's momentum
according to wave-particle duality, the De Broglie wavelength is a wavelength manifested in all the gadgets in quantum mechanics which determines the chance density of locating the item at a given factor of the configuration area. The de Broglie wavelength of a particle is inversely proportional to its momentum
Learn more about de Broglie wavelength here: https://brainly.com/question/19052579
#SPJ4
The formula c₂H₄o can represent?
Answer:
Ethylene oxide
Explanation:
Ethylene oxide is an organic compound with the formula C2H4O. It is a cyclic either and the simplest epoxied: a three-membraned ring consisting of one oxygen atom and two carbon atoms!
Help me pls!!!!!!!!!!!!!!!!!!!!!
The liberated electron will have 10.28 eV kinetic energy.
Given that light of frequency 3.62 × [tex]10^{15}[/tex] Hz strikes a surface of copper metal with work function([tex]W_{0}[/tex] = 4.70 eV).
The incident (photon) energy given as hf (Planck's Constant time's frequency) minus the energy that "binds" the electron to the metal (the work function) will equal the maximum kinetic energy of the emitted electron.
K.E. = hf − ϕ
Where K = Kinetic energy
h = Planck's constant = 6.62607015 × [tex]10^{-34}[/tex] J s
f = frequency = 3.62 × [tex]10^{15}[/tex] Hz
ϕ = 4.70 eV = 4.7 × 1.6 × [tex]10^{-19}[/tex] = 7.52 × [tex]10^{-19}[/tex]
K.E. = 6.62607015 × [tex]10^{-34}[/tex] × 3.62 × [tex]10^{15}[/tex] - 7.52 × [tex]10^{-19}[/tex]
= 6.62607015 × 3.62 × [tex]10^{-19}[/tex] - 7.52 × [tex]10^{-19}[/tex]
= 23.98 × [tex]10^{-19}[/tex] - 7.52 × [tex]10^{-19}[/tex]
K.E. = 16.46 × [tex]10^{-19}[/tex] J = 10.28 eV
To know more about work function refer to: https://brainly.com/question/14287500
#SPJ1
A hydrogen bond can occur between:
A. Two hydrogen atoms on different molecules.
B. Two oxygen atom surrounded by hydrogens.
C. The two hydrogen atoms on a water molecule.
D. A hydrogen from one molecule and an oxygen from another molecule.
A hydrogen bond occurs between a hydrogen from one molecule and an oxygen from another molecule. Option D
What is the hydrogen bond?The hydrogen bond is one that is responsible for association in molecules. It occurs when hydrogen is covalently bonded to a highly electronegative element such as oxygen, nitrogen or Sulphur.
Thus, a hydrogen bond occurs between a hydrogen from one molecule and an oxygen from another molecule. Option D
Learn more about hydrogen bonding:https://brainly.com/question/10904296?
#SPJ1
______ is a naturally occurring metal found in the environment as well as manufactured in products. The major source of this metal has historically been from fuels in on-road motor vehicles such as cars and trucks, and industrial sources.
Lead is a naturally occurring metal found in the environment as well as manufactured in products. The major source of this metal has historically been fuels in on-road motor vehicles such as cars and trucks, and industrial sources.
Lead: An Air PollutantBoth naturally occurring in the environment and used in manufactured goods are the metal lead. In the past, industrial sources and fuels used in on-road motor vehicles (such as cars and trucks) have been the main sources of lead emissions. Lead emissions from the transportation industry rapidly reduced by 95% between 1980 and 1999 thanks to regulatory measures in the U.S. to remove lead from gasoline for on-road motor vehicles, while lead levels in the air decreased by 94% over the same period. The areas closest to lead smelters typically have the greatest airborne lead concentrations today. Today, the processing of ores and metals as well as piston-engine aircraft using leaded aviation gasoline are the main sources of lead emissions into the atmosphere.
Learn more about Lead here:-
https://brainly.com/question/12072843
#SPJ4
In general, which solvent should be used to wash the solid material collected from a filtration?
The same solvent as the liquid in the original mixture should be used to wash the solid material collected from a filtration.
The solid material which is collected from the filtration is washed by that solvent in which that solid material is dissolved. Generally methanol solvent is used to wash the solid material collected from a filtration.
The filtration is the process in which solid particles present in liquid or gaseous fluid are removed by using of a filter.This filter is only permits or allow only the fluid to pass though it and retain the solid particles.The solid particles left is known as filtrate.learn about filtration
https://brainly.com/question/14530470
#SPJ4
Which is more precise
164 or 165 if the true value is 167
Cesium-137 has a half life of 30.0 years. If initially there are 8.0 kg of cesium-137 present in a sample, how many kg will remain after 60.0 years
Mass after 60 years:
2 kg of cesium-137 will remain after 60.0 years.
What is Half-life?
The duration needed for a quantity to decrease to half of its initial value is known as the half-life.
Given:
N0 = is the initial amount of cesium-137 = 8.0 Kg
N = is the amount remaining after a time = Unknown
t = Duration of cesium-137 decay in 8.0 Kg = 60 years
t1/2 = half-life of cesium-137 = 30.0 years
Formula = N/No = (1/2)^t/t1/2
After putting the value:
N/8= (1/2)^60/30
N/8= (1/2)^2
N/8= 1/4
4N= 8
N= 8/4
N= 2 Kg
As a result, 2 Kg of cesium-137 will be present after 60 years.
Learn more about the half-life here,
https://brainly.com/question/14018709
#SPJ4
Potassium secretion is linked to:________.
a. sodium reabsorption
b. glucose reabsorption
c. sodium secretion
d. chloride reabsorption
e. chloride secretion
How many moles of carbon are in 7.87x10^7 carbon atoms
?x10^?
Answer:
1.3 x10^-16
Explanation: answered it in your comments! :)
The molar mass of calcium chloride (CaCl₂) is
110.98 g/mol. If you were to calculate the number
of moles in 23.4 g of CaCl₂, which example shows
the correct way to set up the calculation?
O
23.4 g CaCl₂x.
O
110.98 g CaCl₂
1mole CaCl₂
1 mole CaCl₂
110.98 g CaCl₂
23.4 g CaCl₂x-
The example that shows the correct way to set up the calculation will be the second example.
Number of molesMathematically:
Number of moles = mass/molar mass
In this case, mass = 23.4 g and molar mass = 110.98 g/mol
Number of moles = 23.4/110.98 = 0.21 moles
Thus, the second example is the correct way.
More on the number of moles can be found here: https://brainly.com/question/14919968
#SPJ1
A certain amount of substance has a mass of 120 g and the number of moles is 2. Calculate the molar mass. Group of answer choices
Answer:
60 g / mole
Explanation:
120 g / 2 mole = 60 g/mole
A sample of propane (C3H8) has a mass of 0.47 g. The sample is burned in a bomb calorimeter that has a mass of 1.350 kg and a specific heat of 5.82 J/(g • °C). How much energy is released by the reaction if the temperature of the calorimeter rises by 2.87°C?
Use q equals m C subscript p Delta T..
7.85 kJ
10.6 kJ
22.5 kJ
47.9 kJ
Propane is burned in a 1.350-kg bomb calorimeter with a specific heat of 5.82 J/g.°C. For a temperature rise of 2.87 °C, the energy released is 22.5 kJ.
What is a bomb calorimeter?It is a device that can measure heats of combustion, used in various applications such as calculating the calorific value of foods and fuels.
A sample of propane is burned in a bomb calorimeter with a mass (m) of 1.350 kg and a specific heat (c) of 5.82 J/g.°C. All the energy released by the propane is absorbed by the bomb calorimeter.
If the temperature rises by 2.87 °C (ΔT), we can calculate the energy released (Q) using the following expression.
Q = c × m × ΔT = 5.82 J/g.°C × 1,350 g × 2.87 °C × (1 kJ/1000 J)
Q = 22.5 kJ
Propane is burned in a 1.350-kg bomb calorimeter with a specific heat of 5.82 J/g.°C. For a temperature rise of 2.87 °C, the energy released is 22.5 kJ.
Learn more about bomb calorimeters here: https://brainly.com/question/9360310
#SPJ1
Answer:
22.5 kj
Explanation:
Blank + 3Fe, reaction arrow, Fe3O4+4H2
How to complete this equation so that it is a Single displacement reaction
The complete reaction equation is [tex]3Fe + 4H_2O -- > Fe_3O_4 + 4H_2[/tex]
What are single displacement reactions?They are reactions in which one of the elements in a reactant is displaced by another element in the product.
In the reaction leading to the production of [tex]Fe_3O_4[/tex], Fe displaced H atoms from [tex]H_2O[/tex].
Thus, the equation of the reaction is as follows:
[tex]3Fe + 4H_2O -- > Fe_3O_4 + 4H_2[/tex]
More on single displacement reactions can be found here: https://brainly.com/question/3172917
#SPJ1