Given the below table of compounds and the type of bonding present in each of them. Compounds Bonding Br2 nonpolar covalent, MgF2 ionic, H2S polar covalent, MgO ionic, F2 nonpolar covalent, HF polar covalent, Ca3P2 Ionic, H2Se polar covalent.
Ionic bonding is a type of chemical bond that occurs as a result of the attraction between oppositely charged ions. They are generally formed between metals and non-metals. They result in the formation of an ionic compound.
A polar covalent bond is a type of chemical bond in which electrons are shared unequally between two atoms. It generally occurs between two non-metals. It results in the formation of a polar molecule. A non-polar covalent bond is a type of chemical bond in which electrons are shared equally between two atoms. It generally occurs between two identical non-metals. It results in the formation of a non-polar molecule.
Learn more about ionic bond at:
https://brainly.com/question/977324
#SPJ11
Select all that happen through stomata (assume this question is about a plant which is actively photosynthesizing during the day).
-Water vapors exit leaves.
-Carbon dioxide enters leaves.
-Oxygen exits leaves.
The things which happen through stomata during photosynthesis include water vapors exit the leaves, carbon dioxide enters the leaves, and oxygen exits the leaves for the formation of glucose (carbohydrate). Thus, all are correct options.
What are stomata?Stomata are small pores found on the surfaces of leaves, stems, and other plant parts that enable gas exchange between the atmosphere and the interior of the plant. During photosynthesis, stomata are important for regulating the flow of carbon dioxide and oxygen into and out of the plant. They also help to prevent water loss from the plant by controlling the opening and closing of the stomata.
When photosynthesis occurs, the plant uses energy from the sun to combine water and carbon dioxide to create glucose (a sugar) and oxygen. Stomata facilitate the uptake of carbon dioxide and the release of oxygen during photosynthesis. The water produced as a by-product of photosynthesis exits the plant through stomata via transpiration.
Thus, the three things that happen through stomata (assume this question is about a plant that is actively photosynthesizing during the day) are carbon dioxide entering the leaves, water vapors exiting the leaves, and oxygen exiting the leaves.
Therefore, all the options are correct.
Learn more about Stomata here:
https://brainly.com/question/14351755
#SPJ11
1. Examine the equations. Both equations represent photosynthesis in plants. 2. Which equation is the most accurate? Use evidence from the investigations and your knowledge of the Law of Conservation of Mass to justify your response. Be sure to include: The equation that is most accurate The Law of Conservation of Mass Description of the number of atoms of each element in the reactants and products
I will offer a broad response based on the common equation for photosynthesis because precise formulae or experiments are not provided:
C6H12O6 + 6O2 = 6CO2 + 6H2O + sunshine.
The total mass of the reactants and products in each chemical reaction must match, according to the Law of Conservation of Mass. This means that in the case of photosynthesis, the number of atoms of each element present in the reactants and the number present in the products must be equal. One molecule of glucose (C6H12O6) and six molecules of oxygen (O2) are present on the reactant side of the equation, which contains six molecules of carbon dioxide (CO2) and six molecules of water (H2O). It is evident that the equation is balanced and adheres to the Law of Conservation of Mass by counting the number of atoms of each element on both sides of the equation.
learn more about photosynthesis here:
https://brainly.com/question/29764662
#SPJ4
During _____ , the temperature _____ but the entropy change can be large as molecules _____ their degrees of freedom and motion. Options: a phase change, remains constant, increases, heating, raises, reaction, decrease, falls
During heating, the temperature raises but the entropy change can be large as molecules increase their degrees of freedom and motion.
Entropy is a thermodynamic quantity that measures the disorder or randomness of a system. The greater the number of ways that energy can be distributed throughout the system, the higher the entropy.
Heat refers to the energy that is transferred from one body to another when they are at different temperatures. When energy is transferred, it moves from a high-energy state to a low-energy state, and the process continues until the temperatures of the two bodies become the same. During heating, the temperature raises but the entropy change can be large as molecules increase their degrees of freedom and motion.
Learn more about entropy at https://brainly.com/question/30481619
#SPJ11
what needs to increase in order to make a substance more soluble?
By supplying more energy to counteract intermolecular interactions and increasing contact between solvent and solute, raising temperature, agitation, surface area, or lowering particle size can enhance solubility.
A substance's solubility refers to its capacity to dissolve in a solvent. Intermolecular forces between the solute particles are broken during the dissolving process, and new connections with the solvent molecules are created. Solubility can be raised by adding extra energy to break through these intermolecular connections. Although agitation and expanding surface area improve the contact between the solvent and solute, rising temperature releases more thermal energy to break the intermolecular interactions. By increasing surface area per unit volume, particle size reduction increases interaction with the solvent. Moreover, by giving the solute additional solvation sites, more solvents or surfactants can be added to increase solubility.
learn more about solubility here:
https://brainly.com/question/29857840
#SPJ4
Sodium iodine has a pysical life of 8 days and a biological half-life of 24 days. determine its effective half-time
The effective half life of sodium iodide whose physical life is 8 days is 6 days.
What is half life?
The entire rate of a radioactive material's decay in a certain system, taking into account both its physical and biological half-lives, is measured by its effective half-life. It is determined by multiplying the reciprocals of the physical and biological half-lives together.
Given that the biological half-life of sodium iodine is 24 days and its physical half-life is 8 days, we can compute its effective half-life as follows:
Effective half-life = 1 / (1/physical half-life + 1/biological half-life)
= 1 / (1/8 + 1/24)
= 1 / (0.125 + 0.0417)
= 1 / 0.1667
= 6 days (approximately)
Therefore, the effective half-life of sodium iodine is approximately 6 days.
Learn more about half life on:
https://brainly.com/question/1160651
#SPJ11
explain why the ph of 0.1 m ethanol is higher than the ph of 0.1 m acetic acid. draw structures to support your explanation.
The pH of 0.1 M ethanol is higher than the pH of 0.1 M acetic acid is because ethanol is a neutral molecule while acetic acid is a weak acid.
What are the effects of change in pH on different molecules?The pH of 0.1 M ethanol is higher than the pH of 0.1 M acetic acid because ethanol is a neutral molecule and does not donate or accept protons, while acetic acid is a weak acid that can donate a proton to water, creating hydronium ions (H₃O⁺) and decreasing the pH.
Here are the structures of ethanol and acetic acid to support this explanation:
Ethanol (CH₃CH₂OH):
H H
| |
H-C-C-OH
| |
H H
Acetic Acid (CH₃COOH):
H O
| ||
H-C-C-O-H
|
H
In acetic acid, the carboxylic acid group (-COOH) can donate a proton (H⁺) to water, which increases the concentration of hydronium ions (H₃O⁺) in the solution, leading to a lower pH:
CH₃COOH + H₂O → CH₃COO⁻ + H₃O⁺
Ethanol, on the other hand, does not have an acidic hydrogen and will not donate protons to water, so its pH remains neutral (pH around 7).
To know more about pH:
https://brainly.com/question/3649733
#SPJ11
The base hydrolysis of ethyl propanoate followed by addition of acid produce what two organic products? A) propane and ethanol B) propanoic acid and ethane C) propanal and ethanol D) propanoic acid and ethanol E) propanoic acid and ethanal
Ethyl propanoate is hydrolyzed by a base, and then ethanol and propanoic acid are produced.
The carbonyl carbon of the ester is attacked by the nucleophilic component of the base during the hydrolysis of ethylpropanoate.
Acyl-oxygen bond fission occurs in the second phase.
07 base E-O CH₂ CH₂ CH₂ CH3 NaOH ci oro band CH₃-CH - 4 Lacyl, Loche Lochsch, oxygen breakdown CH₃ CH₂ For a HE, tchada tha
Propanoic acid and ethanol are formed during this procedure.
The molecule of propanoic acid has a carboxyl group. Additionally, the name ends with "-oic acid." These two details show that propanoic acid is carboxylic. The term ethanol ends in O-L, and its structure includes a hydroxy group. These two facts demonstrate that ethanol is an alcoholic beverage.
Learn more about Ethanol here:
https://brainly.com/question/25002448
#SPJ4
Which of the following is not a characteristic of rivers and streams?
a.
vary in size
b.
mainly saltwater
c.
part of the water cycle
d.
flow toward other bodies of water
Please select the best answer from the choices provided
A
B
C
D
Answer:
b. mainly saltwater
Explanation:
The characteristic that is not true for rivers and streams is option b - mainly saltwater. Rivers and streams are freshwater bodies of water that flow from higher elevations to lower elevations, and eventually empty into larger bodies of water such as lakes, oceans, or other rivers. They are a vital component of the water cycle, and can vary in size from small streams to large rivers that span entire continents.
Answer:
B
Explanation:
Saltwater is not a characteristic of rivers and streams. Rivers and streams are typically freshwater systems, with only a few exceptions where they may be brackish or slightly salty due to their proximity to the ocean or underground salt deposits.
Three major contributing resonance structures are possible for the following cation. One is given below. Draw the remaining structures (in any order), including nonbonding electrons and formal charges. Omit curved arrows.Which contributes most to the hybrid?a) The structure with the positive charge on sulfur.b) All contribute equally.c) The structures with the positive charge on carbon.
Hybridization depends on the charge distribution and electronic configuration of atoms present in the molecule. Option c is the correct answer.
Three major contributing resonance structures are possible for the following cation. The one is already given. Draw the remaining structures (in any order), including nonbonding electrons and formal charges.
Omit curved arrows.There are three possible resonance structures of cation as shown in the figure below: Contributing resonance structures. There are two possibilities of charge distribution in the cation.
The carbon can be positively charged, or the sulfur can be positively charged. Therefore, two structures out of three have the positive charge on carbon, and one structure has the positive charge on sulfur.
Therefore, option c) The structures with the positive charge on carbon contributes most to the hybrid.
Hybridization is the combination of the atomic orbitals of the same or nearly same energy level in an atom to form a new set of hybrid orbitals having characteristics different from the original atomic orbitals.
Hybridization depends on the number of sigma bonds an atom is involved in, and the number of lone pair electrons that atom is having. It also depends on the electronegativity of atoms present in the molecule.
In this molecule, the sulfur atom has no lone pair electrons and is involved in two sigma bonds with two carbon atoms. So, the hybridization of sulfur in this molecule is sp2.
The carbon atoms present in the molecule have one lone pair electron and are involved in two sigma bonds each. So, the hybridization of carbon atoms in the molecule is sp2.
Hence, hybridization depends on the charge distribution and electronic configuration of atoms present in the molecule. Option c is the correct answer.
to know more about hybridization refer here:
https://brainly.com/question/14140731#
#SPJ11
a 30.00-ml sample of 0.125 m hcooh is being titrated with 0.175 m naoh. what is the ph after 21.4 ml of naoh has been added? ka of hcooh
The pH of the solution after 21.4 mL of NaOH has been added is 3.75.
What is the pH of the solution?
HCOOH (formic acid) is a weak acid, so we can use the Henderson-Hasselbalch equation to calculate the pH of the solution at any point during the titration.
The Henderson-Hasselbalch equation is:
pH = pKa + log([A-]/[HA])
where;
pKa is the acid dissociation constant, [A-] is the concentration of the conjugate base (in this case, HCOO-), and [HA] is the concentration of the acid (in this case, HCOOH).At the beginning of the titration, before any NaOH has been added, the solution contains only HCOOH and its conjugate base, HCOO-.
The concentration of HCOOH is 0.125 M, and the concentration of HCOO- is 0.
We can calculate the pH using the Henderson-Hasselbalch equation:
pH = pKa + log([A-]/[HA])
pH = -log(1.8 x 10⁻⁴) + log(0/0.125)
pH = 2.74
At the equivalence point, all of the HCOOH has been converted to HCOO- by the addition of NaOH, so the pH will be determined by the concentration of the resulting salt. Since HCOO- is the conjugate base of a weak acid, it will undergo hydrolysis to a small extent, producing OH- ions and raising the pH.
However, we are not at the equivalence point yet.
To find the pH after 21.4 ml of NaOH has been added, we need to first calculate how many moles of NaOH have been added. We know the concentration of the NaOH solution (0.175 M) and the volume that has been added (21.4 mL = 0.0214 L), so we can calculate the number of moles of NaOH:
moles NaOH = concentration x volume
moles NaOH = 0.175 M x 0.0214 L
moles NaOH = 0.003745
Since NaOH reacts with HCOOH in a 1:1 ratio, we know that 0.003745 moles of HCOOH have been neutralized.
This means that there are 0.125 - 0.003745 = 0.121255 moles of HCOOH remaining in the solution.
We also know that 21.4 mL of NaOH has been added to 30.00 mL of HCOOH, so the total volume of the solution is now 51.4 mL.
We can use the moles of HCOOH and the total volume to calculate the concentration of HCOOH:
concentration = moles/volume
concentration = 0.121255/0.0514
concentration = 2.357 M
We can use this concentration and the concentration of the conjugate base (which is equal to the number of moles of NaOH added divided by the total volume) to calculate the pH using the Henderson-Hasselbalch equation:
pH = pKa + log([A-]/[HA])
pH = -log(1.8 x 10⁻⁴) + log(0.003745/2.357)
pH = 3.75
Learn more about pH here: https://brainly.com/question/26424076
#SPJ1
The complete question is below:
a 30.00-ml sample of 0.125 m hcooh is being titrated with 0.175 m naoh. what is the ph after 21.4 ml of naoh has been added? ka of hcooh is 1.8 x 10⁻⁴
Will the following reaction result in a precipitate? If so, identify the precipitate. K3PO4 + Cr(NO3)+ 3 KNO3 + CrPO4 a. No, a precipitate will not form b. Yes, CrPO4 will precipitate c. Yes, KNO3 will precipitate
Yes, a precipitate will form in this reaction. The precipitate that will form is CrPO₄.
The reaction is a double displacement reaction between two soluble salts, K₃PO₄ and Cr(NO₃)₃, with the two potassium nitrate (KNO₃) ions acting as a common ion. In a double displacement reaction, the cations and anions of the two reactants switch places, forming two new products.
In this reaction, the cations, K⁺ and Cr³⁺, will switch places, and the anions, PO₄³⁻ and NO₃⁻ will switch places, resulting in the formation of two new products: KNO₃and CrPO₄.
The balanced chemical equation for the reaction between K₃PO₄ and Cr(NO₃)₃ is given below:
K₃PO₄ + Cr(NO₃)₃ → 3KNO₃ + CrPO₄ (s)
We need to identify the product which is an insoluble solid. According to the solubility rules, most nitrates are soluble in water, and only a few nitrates of metal cations are insoluble. Potassium nitrate (KNO₃ ) is a water-soluble salt, so it cannot be the product that forms a precipitate in the above reaction.
Chromium phosphate (CrPO₄), on the other hand, is a slightly soluble salt and can be expected to form a precipitate. Hence, the precipitate formed as a result of the reaction between K₃PO₄ and Cr(NO)₃ is CrPO₄ (chromium phosphate).
Therefore, option (b) is the correct answer to this question, and the precipitation reaction will be represented as:
K₃PO₄ + Cr(NO₃)₃ → 3KNO₃ + CrPO₄ (s)
To know more about CrPO₄, refer here:
https://brainly.com/question/8264348#
#SPJ11
Choose the paramagnetic species from below.
Ar
O
Ti4+
All of the above are paramagnetic.
None of the above are paramagnetic.
The correct answer is option (c) Ti4+.
The species which are attracted to a magnetic field are known as paramagnetic species. If we talk about the given options, then we can see that there are only 3 species that are given. Out of these three, only Ti4+ is paramagnetic. How can we determine whether a species is paramagnetic or not? The species which contain unpaired electrons are paramagnetic in nature. If there are all paired electrons, then the species are diamagnetic. If we talk about Ti4+, then it contains 2 unpaired electrons, which makes it paramagnetic. This is the reason why the correct answer is Ti4+.In Ar, all the electrons are paired, which makes it diamagnetic. In O, there are 2 unpaired electrons, which makes it paramagnetic. How can we determine whether a species is paramagnetic or not? The species which contain unpaired electrons are paramagnetic in nature. If there are all paired electrons, then the species are diamagnetic.
Learn more about paramagnetic species at brainly.com/question/29990302
#SPJ11
ion channels that open and close in response to a change in membrane potential are called _____.
Ion channels that open and close in response to a change in membrane potential are called voltage-gated ion channels.
What is Voltage-gated ion channels?Voltage-gated ion channels are a specialized type of membrane protein that are embedded in the lipid bilayer of excitable cells. They have a pore that allows ions to flow through, and they can be selective for different types of ions, such as sodium (Na+), potassium (K+), or calcium (Ca2+).
The opening and closing of the channel's pore is controlled by changes in the membrane potential, which is the difference in electrical charge across the cell membrane.
These channels are crucial for the generation and propagation of electrical signals in excitable cells, such as neurons and muscle cells. Voltage-gated ion channels are capable of detecting small changes in membrane potential and responding by opening or closing their pore, allowing ions to flow across the membrane and alter the electrical state of the cell.
Learn more about ion channels here: https://brainly.com/question/12578279
#SPJ1
how much volume in ml will you need to take from 4.1 m concentrated stock solution if you would like to prepare a diluted 1 solution with 100 ml? report and round your answer to a whole integer.
To prepare 100ml of a 1:100 dilution, you need to take 1ml from the 4.1m concentrated stock solution. The total volume you will need is 2.44 ml, which can be rounded up to a whole integer.
To prepare a diluted 1 solution with 100 ml, how much volume in ml will you need to take from 4.1 m concentrated stock.
To prepare a diluted 1 solution with 100 mL, 2.44 mL volume from 4.1 M concentrated stock solution is required.
Volume required for preparing a diluted 1 solution can be calculated using the dilution formula.C1V1 = C2V2.
The stock concentration (C1) is 4.1 M. The final concentration (C2) is 1.0 M. The final volume (V2) is 100 mL. The required volume of stock can be calculated from the above formula.
C1V1 = C2V2
4.1×V1 = 1.0×100
V1=1.0×100
4.1=2.44 mL.
Therefore, to prepare a diluted 1 solution with 100 mL, 2.44 mL volume from 4.1 M concentrated stock solution is required.
Read more about the volume:
https://brainly.com/question/27100414
#SPJ11
Classify each of these soluble solutes as a strong electrolyte, a weak electrolyte, or a nonelectrolyte. Solutes Formula Hydroiodic acid HI Lithium hydroxide LiOH Hydrofluoric acid HF Propyl amine CH3CH2CH2NH2 Sodium bromide NaBr Propanol C3H7OH Glucose C6H12O6
The solute's classification refers to the extent to which it dissociates into ions in water.
Hydroiodic acid (HI) - Strong Electrolyte Lithium hydroxide (LiOH) - Strong Electrolyte Hydrofluoric acid (HF) - Weak Electrolyte Propyl amine (CH3CH2CH2NH2) - Weak Electrolyte Sodium bromide (NaBr) - Strong Electrolyte Propanol (C3H7OH) - Weak Electrolyte Glucose (C6H12O6) - NonelectrolyteElectrolytes are solutes that dissociate into ions to a considerable extent when dissolved in water. These solutes conduct electric current in aqueous solutions. Strong electrolytes dissociate entirely into ions in water, while weak electrolytes only dissociate partially into ions.
Non-electrolytes are solutes that do not dissociate into ions when dissolved in water. Therefore, they do not conduct electric current. Examples of nonelectrolytes include sugar and alcohol.
Read more about the topic of electrolytes:
https://brainly.com/question/17089766
#SPJ11
2Na + 2H2O → 2NaOH + H2
What is the total number of moles of hydrogen produced when 4 moles of sodium react completely?
A. 1 B. 2 C. 3 D. 4
When 4 moles of sodium fully react, 2 moles of hydrogen are produced as a whole. The right answer is B.
The balanced equation for the reaction between sodium and water is 2Na + 2H2O → 2NaOH + H2. This equation shows that 2 moles of sodium react with 2 moles of water to produce 1 mole of hydrogen gas.
If 4 moles of sodium react completely, we can calculate the amount of hydrogen produced by using stoichiometry. Since 2 moles of sodium produce 1 mole of hydrogen, 4 moles of sodium will produce 2 moles of hydrogen (4 moles Na x 1 mole H2 / 2 moles Na = 2 moles H2).
Therefore, the total number of moles of hydrogen produced when 4 moles of sodium react completely is 2 moles. The correct answer is B.
To learn more about sodium refer to:
brainly.com/question/29327783
#SPJ4
A substance that cannot be decomposed by a simple chemical process into two or more different substance is ______(A) molecule(B) element(C) mixture(D) compound
Explanation:
An element is a pure substance that cannot be separated into simpler substances by chemical or physical means.
PLEASE HELP!!!
Part A
Find a room that can be made completely dark. In the room, tape a piece of white paper on the wall at eye level. Turn on
the flashlight, and turn off the lights in the room. Observe what the light looks like as it hits the white paper. Next, place
the clear plastic in front of the flashlight. Does the plastic affect how the light hits the paper on the wall? If so, how?
When the flashlight is turned on and the lights are turned off, the white paper on the wall will appear bright as it reflects the light from the flashlight. However, when a clear plastic is placed in front of the flashlight, the light hitting the white paper on the wall will be affected.
The clear plastic acts as a lens, which changes the direction and intensity of the light passing through it. As the light passes through the plastic, it refracts or bends, causing the beam of light to spread out or focus. This results in a change in the shape and size of the light beam hitting the white paper on the wall.
The effect of the plastic on the light hitting the paper will depend on the shape and thickness of the plastic, as well as its distance from the flashlight. In general, the plastic will cause the light beam to spread out or focus differently, resulting in a change in the appearance of the light hitting the paper on the wall.
To learn more about intensity refer to:
brainly.com/question/29735130
#SPJ4
what information does the first and third digit of the VESPR number provide
Answer:
The first and third digit of the VSEPR notation indicate the number of electron groups and lone pairs on the central atom, respectively. This information is used to determine the molecular geometry of a molecule. For example, in the notation AX3E2, the first digit "3" represents three electron groups around the central atom, while the third digit "2" represents two lone pairs on the central atom, leading to a trigonal bipyramidal molecular geometry.
Explanation:
The VSEPR (Valence Shell Electron Pair Repulsion) number is a shorthand notation used to describe the molecular geometry of a molecule based on the number of electron groups (bonding and non-bonding) around the central atom.
The first digit of the VSEPR number indicates the number of electron groups around the central atom, while the third digit indicates the number of lone pairs on the central atom.
For example, in the VSEPR notation AX3E2, the first digit "3" indicates that there are three electron groups around the central atom, and the third digit "2" indicates that there are two lone pairs on the central atom. This notation corresponds to a trigonal bipyramidal molecular geometry, where three bonding pairs and two lone pairs are arranged symmetrically around the central atom.
Answer:
Explanation:The volume of a gas 100mmHg pressure and at 40°C is 480mL. What volume does the gas occupy at standard temperature and pressure
determine the ka value for an acid where a 0.22 m solution has a measured ph of 2.98. enter your answer in scientific notation with two significant figures.
The Ka value is 2.2x10⁻³ in scientific notation with two significant figures.
To explain in brief, Ka is the acid dissociation constant that measures the strength of an acid.
The formula is used to find the value of the Ka constant when we have the molar concentration and the pH of the solution.
The calculation is done as follows:
Ka = [H₃O⁺]² / [HA]
Here, H₃O⁺ is the hydronium ion, which is formed when an acid is dissolved in water, and HA represents the acid.
Therefore, in order to determine the Ka value, we need to find the concentration of H₃O⁺ ions in the given solution.
Since pH = - log[H₃O⁺],
we can calculate [H₃O⁺] as follows:
2.98 = -log[H₃O⁺] = 10⁻²⁹⁵ = 1.28 × 10⁻³ M
Now, we can use the formula to find Ka:
Ka = [H₃O⁺]² / [HA]
= (1.28 × 10⁻³))² / 0.22
= 2.2 × 10⁻⁵
Therefore, the Ka value for the given acid is 2.2 × 10⁻⁵.
Learn more about dissociation constants here:
https://brainly.com/question/30930515
#SPJ11
When a utensil is stored in water between uses, what are the requirements?A. Running water at any temperature, or a container of water at 70 F (21 C) or lower.B. Running water at any temperature, or a container of water at 135 F (57 C) or lower.C. Running water at 70 F (21 C) or lower, or a container of water at 70 F (21 C) or lower.D. Running water at 135 F (57 C) or lower, or a container of water at 135 F (57 C) or lower.
D. Running water at 135 F (57 C) or lower, or a container of water at 135 F (57 C) or lower.
why can you consider the stoichiometric relationship between h2 and br2 when trying to calculate h2 and br2 in a quantity of hbr
The stoichiometric relationship between [tex]H_2[/tex] and [tex]Br_2[/tex] can be used to calculate the amount of [tex]H_2[/tex] and [tex]Br_2[/tex] in a given quantity of HBr because the ratio of [tex]H_2[/tex] to [tex]Br_2[/tex] in the reaction of [tex]H_2 + Br_2 \rightarrow 2HBr[/tex] has a 1:1 ratio of [tex]H_2[/tex] to [tex]Br_2[/tex], meaning that if there are 4 moles of HBr produced, there will be 2 moles of [tex]H_2[/tex] and 2 moles of [tex]Br_2[/tex].
The law of mass conservation is a fundamental principle in chemistry that says that the mass of the reactants and products should be equal.
The balanced equation for the reaction between H2 and Br2 to form HBr is as follows:
[tex]H_2 + Br_2 \rightarrow 2HBr[/tex]
The stoichiometric relationship between [tex]H_2[/tex] and [tex]Br_2[/tex] can be seen in this equation. For every one mole of [tex]H_2[/tex] , one mole of [tex]Br_2[/tex] is required to produce two moles of HBr. Thus, if we know the quantity of HBr, we can use stoichiometry to determine the quantities of [tex]H_2[/tex] and [tex]Br_2[/tex] that were required to form it. Stoichiometry is a branch of chemistry that deals with the quantitative relationships between reactants and products in a chemical reaction. It is used to calculate the amounts of reactants and products that are involved in a reaction by using the balanced equation and the coefficients of the reactants and products. Thus, the stoichiometric relationship between [tex]H_2[/tex] and [tex]Br_2[/tex] is essential in determining the amount of H2 and Br2 that are present in a given quantity of HBr.
To know about law of mass conservation, click the below link:
https://brainly.com/question/13383562
#SPJ11
Part A Classify these amino acids as acidic, basic, neutral polar, or neutral nonpolar Drag each item to the appropriate bin. Hints Reset Help -NH2 CH3 CH3 CH NH2 CH2 H,N-C-coo Acidic Basic Neutral polar Neutral nonpolar My Answers Give Up Part B Classify these amino acids as acidic, basic, neutral polar, or neutral nonpolar Drag each item to the appropriate bin. Hints Reset Help OH CH2 HON-C-COO H,N-C-COO Acidic Basic Neutral polar Neutral nonpolar
Amino acids as acidic, basic, neutral polar, or neutral nonpolar are
Part A: NH₂: Basic, CH₃: Neutral nonpolar, CH₃: Neutral nonpolar, CH: Neutral nonpolar, NH₂: Basic, CH₂: Neutral nonpolar, H,N-C-coo: Acidic
Part B: OH: Neutral polar, CH₂: Neutral nonpolar, HON-C-COO: Acidic, H,N-C-COO: Acidic.
Acidic amino acids: These amino acids have a carboxyl group (COOH) in their side chain, which makes them acidic. They can donate a hydrogen ion (H+) and have a negative charge at physiological pH.
Basic amino acids: These amino acids contain an amino group (NH2 or NH3+) in their side chain, which makes them basic. They can accept a hydrogen ion (H+) and have a positive charge at physiological pH.
To learn more about the Amino acids, follow the link:
https://brainly.com/question/31872499
#SPJ12
what is the molarity of a solution of 145 g of nii2 dissolved enough water to make a 400 ml of solution?
The molarity of the solution prepared by dissolving 145 g of nickel ion, Ni²⁺ in enough water to make a 400 mL of solution is 6.175
How do i determine the molarity of the solution?The molarity of the solution can be obtained as illustrated below:
Mass of nickel ion, Ni²⁺ = 145 grams Molar mass of nickel ion, Ni²⁺ = 58.7 g/molMole of nickel ion, Ni²⁺ = mass / molar mass = 145 / 58.7 = 2.47 molesVolume of solution = 400 mL = 400 / 1000 = 0.4 LMolarity of solution = ?Molarity of solution = mole / volume
Molarity of solution = 2.47 / 0.4
Molarity of solution = 6.175 M
Thus, from the above calculation, we can conclude that the molarity of the solution is 6.175 M
Learn more about molarity:
https://brainly.com/question/16073358
#SPJ1
Determine the percent yield of diacetyl ferrocene in the following unbalanced reaction using the data provided. Record your answer on the bubble sheet using the second significant figure. AICI Ferrocene MW: 186.03 used: 210. mg Acetyl Chloride MW: 78.50 Density: 1.104 g/ml used: 155 uL Diacetyl Ferrocene MW: 270.10 isolated: 225 mg. multiple choice: O A. 3 B. 4 C. 5 D. 6
The percent yield of diacetyl ferrocene in the given unbalanced reaction is 144.5%. The answer is option A. 3.
Explanation : To calculate the percent yield of diacetyl ferrocene in the following unbalanced reaction, use the following formula:
Percent Yield = (Mass of Isolated Product / Theoretical Mass of Product) x 100%
To find the Theoretical Mass of Product, use the following formula:
Theoretical Mass of Product = (MW of Reactant * Mass of Reactant Used) / MW of Product
Substituting in the values provided:
Theoretical Mass of Product = (186.03 * 210mg) / 270.10 = 155.46mg
Percent Yield = (225mg / 155.46mg) x 100% = 144.48%
Therefore, the percent yield of diacetyl ferrocene in the given unbalanced reaction is 144.5%.
For more such questions on diacetyl ferrocene
https://brainly.com/question/19165806
#SPJ11
what is the empirical formula of a compound composed of 25.9 g of potassium ( k ) and 5.30 g of oxygen ( o )? insert subscripts as needed.
The empirical formula of a compound composed of 25.9 g of potassium (K) and 5.30 g of oxygen (O) is K2O. To calculate the empirical formula, we need to convert the given mass of the elements into moles. The molar mass of potassium is 39.09 g/mol and the molar mass of oxygen is 16.00 g/mol. Thus, 25.9 g of potassium is equivalent to 0.66 mol, and 5.30 g of oxygen is equivalent to 0.33 mol. To find the empirical formula, divide the moles of each element by the smallest number of moles, which is 0.33 mol in this case. This yields the ratio of 2:1 for potassium and oxygen, thus the empirical formula is K2O.
Explanation: The empirical formula of a compound composed of 25.9 g of potassium (K) and 5.30 g of oxygen (O) is K2O. Empirical formula is defined as the simplest formula of a compound that shows the ratio of atoms present in the compound. It can be determined by finding the lowest whole number ratio of atoms in the compound.
To determine the empirical formula of the compound containing potassium and oxygen, the following steps can be followed:
1. Convert the given mass of each element into moles by using the molar mass of each element:
Molar mass of K = 39.10 g/mol
Molar mass of O = 16.00 g/mol
Number of moles of K = 25.9 g / 39.10 g/mol = 0.662 moles
Number of moles of O = 5.30 g / 16.00 g/mol = 0.331 moles
2. Find the mole ratio of the two elements by dividing each value by the smaller number of moles:
Mole ratio of K : O = 0.662/0.331 = 2 : 1
3. Write the empirical formula using the mole ratio as subscripts:
Empirical formula = K2O
Therefore, the empirical formula of the compound composed of 25.9 g of potassium (K) and 5.30 g of oxygen (O) is K2O.
For more such questions on molar mass
https://brainly.com/question/20949039
#SPJ11
________ metamorphism will occur where two blocks of rock are grinding against each other.
Fault zone metamorphism is the term used to describe the sort of metamorphism that would take place when two pieces of rock are rubbing against one another.
The heat and pressure produced as rocks along a fault plane rub up against one another is what causes fault zone metamorphism. Rocks are subjected to high pressure and temperature during fault zone metamorphism, which can result in recrystallization and mineral deformation. This process can result in the production of new minerals and the alignment of existing minerals in the pressure's direction, giving the rock known as mylonite a distinctive texture and fabric. Generally speaking, fault zone metamorphism is a form of dynamic metamorphism that results from tectonic action and is often connected.
learn more about metamorphism here:
https://brainly.com/question/1366827
#SPJ4
when 2 mol of potassium chlorate crystals decomposes to potassium chloride crystals and oxygen gas at constant temperature and pressure, 78.0 kj of heat is given off. write a thermochemical equation for this reaction.
Thermochemical equation for the chemical reaction is: 2KClO₃(s)→ 2KCl(s) + 3O₂(g), ΔH = -78.0kJ.
What is thermochemical equation?Potassium chlorate (KClO₃) decomposes into potassium chloride (KCl) and oxygen gas (O₂). When 2 mol of KClO₃ crystals decompose to KCl crystals and O₂ gas at constant temperature and pressure, 78.0 kJ of heat is given off. KClO₃(s) → KCl(s) + 3/2 O₂(g)
For every mole of KClO₃(s), there is the production of one mole of KCl(s) and 1.5 moles of O₂(g).Therefore, for the formation of 2 mol of KClO₃(s), the quantities of the products are: 2 mol KClO₂(s) → 2 mol KCl(s) + 3 mol O₂(g)
The thermochemical equation for the reaction is:2KClO₃(s) → 2KCl(s) + 3O₂(g), ΔH = -78.0kJ
Learn more about Thermochemical equation here:
https://brainly.com/question/2874342
#SPJ11
A scientist did a test to compare two substances: substance Q and substance R.
At room temperature, both substances are liquid. When the scientist transferred
the same amount of energy out of both substances, only one substance
changed phase while the other did not. Which substance changed phase, and
how did it change? *
Substance Q changed phase because the attraction of the molecules was able to
overcome their slower movement. Its molecules now move in place.
Substance Q changed phase because the strong attraction between molecules made
their movement slower. Its molecules now move in place.
Substance R changed phase because the weak attraction between molecules let them
move faster. Its molecules now move around each other.
Substance R changed phase because the attraction was able to overcome the slower
molecules. Its molecules now move away from each other.
Based on the information provided, the correct answer is:
Substance R changed phase because the weak attraction between molecules let them move faster. Its molecules now move around each other.
This is because when the scientist transferred the same amount of energy out of both substances, only one substance changed phase while the other did not. This indicates that one of the substances has a lower boiling point than the other. Since both substances are liquids at room temperature, it means that the substance that changed phase must have vaporized (turned into gas) while the other substance did not.
Substance R must have a weaker intermolecular force of attraction between its molecules compared to Substance Q. This means that Substance R has a lower boiling point, which allowed its molecules to move around each other and form a gas phase when energy was transferred out of it. In contrast, Substance Q remained in the liquid phase because its molecules had stronger intermolecular forces of attraction that held them together.
To know more about Molecules, visit: brainly.com/question/19922822
#SPJ4
A photon of light has a wavelength of 0. 050 cm. Calculate its energy
A photon of light has an energy of 3.977 x [tex]10^{-19}[/tex] joules and a wavelength of 0.050 centimetres.
The energy of a photon is related to its wavelength by the formula E = hc/λ, where E is the energy, h is Planck's constant (6.626 x [tex]10^{-34}[/tex] joule seconds), c is the speed of light (2.998 x [tex]10^{8}[/tex] meters per second), and λ is the wavelength of the photon.
To use this formula, we need to convert the wavelength of the photon from centimeters to meters, since c is given in meters per second. We can do this by dividing 0.050 cm by 100, which gives us 5.0 x [tex]10^{-4}[/tex]meters.
Now we can plug in the values we have into the formula: E = (6.626 x [tex]10^{-34}[/tex] joule seconds) x (2.998 x [tex]10^{8}[/tex] meters per second) / (5.0 x [tex]10^{-4}[/tex]meters)
Simplifying the equation, we get:
E = 3.977 x [tex]10^{-19}[/tex] joules
Therefore, a photon of light with a wavelength of 0.050 cm has an energy of 3.977 x [tex]10^{-19}[/tex] joules. It is important to note that photons are the smallest quantifiable packets of electromagnetic energy, and their energy is directly proportional to their frequency and inversely proportional to their wavelength.
To learn more about wavelength refer to:
brainly.com/question/27353508
#SPJ4