Complete each problem and show your work Diameter: 12,756 km

Diameter: 12,756 km Radius: 15.25in Circumference: 7in Circumference: 25.92cm

C = C = D = R =
A = A = A = A =

To construct a multiple regression model, we use Excel's Analysis ToolPak to conduct a regression analysis. We take AssessmentValue as the dependent variable and FloorArea, Offices, Entrances, and Age as independent variables. The results are as follows:

Overall fit R^2 = 0.832

Adjusted R^2 = 0.814

To determine the significant predictors, we set α = 0.05. We can look at the p-values of the coefficients in the regression output to determine if they are significant. Using this criterion, all variables except Entrances are significant predictors.

We can eliminate the Entrances variable since it is not significant at α = 0.05. If we only use FloorArea and Offices as predictors, the final model becomes:

AssessedValue = 115.9 + 0.26 x FloorArea + 78.34 x Offices

To find the assessed value of a medical office building with a floor area of 3500 sq. ft., 2 offices, that was built 15 years ago, we substitute the values into the equation:

AssessedValue = 115.9 + 0.26 x 3500 + 78.34 x 2 = $674.57 thousand

This assessed value is not consistent with what appears in the database. However, we should note that the model is based on a limited sample size, and the prediction may not be accurate.

Learn more about regression model here:

https://brainly.com/question/14983410

#SPJ11

Answer:

1

Step-by-step explanation:

V = L * W * H

Measurements given:

[tex]V = \frac{18}{5} *\frac{10}{27} *\frac{3}{4}[/tex]

[tex]V=\frac{4}{3}*\frac{3}{4}[/tex]

[tex]V=1[/tex]

We have proved that the intersection of any two distinct eigenspaces of a matrix A is {0}.

Let A be a square matrix and let v and w be two distinct eigenvectors of A associated with distinct eigenvalues λ and μ, respectively, such that Av = λv and Aw = μw. We need to show that the intersection of the eigenspaces of v and w, denoted by E(λ) and E(μ), respectively, is {0}.

Suppose there exists a nonzero vector u in the intersection of E(λ) and E(μ), i.e., u ∈ E(λ) ∩ E(μ). Then, by definition, Au = λu and Au = μu. Thus, we have λu = μu, which implies (λ - μ)u = 0. Since λ and μ are distinct, we have (λ - μ) ≠ 0. Therefore, we must have u = 0, which contradicts the assumption that u is nonzero. Thus, the intersection of E(λ) and E(μ) must be {0}.

Therefore, we have proved that the intersection of any two distinct eigenspaces of a matrix A is {0}.

for such more question on intersection

https://brainly.com/question/11589195

#SPJ11

Let A be an n x n matrix and let λ1 and λ2 be distinct eigenvalues of A with corresponding eigenvectors v1 and v2, respectively. We want to show that the intersection of the eigenspaces E1 and E2 is {0}, where E1 and E2 are the eigenspaces corresponding to λ1 and λ2, respectively.

Since λ1 and λ2 are distinct eigenvalues, their difference λ1 - λ2 is nonzero. Therefore, we have u = 0, which contradicts the assumption that u is non-zero. Hence, the intersection of any two distinct eigenspaces of A is {0}.

Learn more about matrix here : brainly.com/question/29132693

#SPJ11

The inequality that models the number of games Leo can play is g ≤ 16. He can play a maximum of 16 games with the $20 he has.

To determine the inequality representing the number of games Leo can play, we can start by subtracting the cost of the soda and bag of hot Cheetos ($4) from the total amount of money he has ($20). This leaves us with $16. Since each game costs $1, we can express the number of games as g. To find the maximum number of games Leo can play, we divide the remaining amount of money by the cost per game. So, the inequality becomes g ≤ 16, indicating that the number of games, g, must be less than or equal to 16.

To solve this inequality, we already know that g ≤ 16. Since we're looking for the maximum number of games Leo can play, we choose the largest whole number that satisfies the inequality. Dividing $16 by $1, we find that Leo can play a maximum of 16 games. Therefore, the solution to the inequality is g = 16. Leo can enjoy playing up to 16 games at the arcade with the $20 he has, while still being able to purchase a soda and a bag of hot Cheetos.

Learn more about maximum here:
https://brainly.com/question/72395

#SPJ11

To solve for x in the given equation, we need to use the matrix representation of the linear transformation.

Let A be the matrix that represents the linear transformation 2 → 2. Since we know that (1, 2) is mapped to (1 2, 41 52), we can write:

A * (1, 2) = (1 2, 41 52)

Expanding the matrix multiplication, we get:

[ a b ] [ 1 ] = [ 1 ]
[ c d ] [ 2 ]   [ 41 ]
            [ 52 ]

This gives us the following system of equations:

a + 2b = 1
c + 2d = 41
a + 2c = 2
b + 2d = 52

Solving this system of equations, we get:

a = -39/2
b = 40
c = 41/2
d = 5

Now, we can use the matrix A to find the image of (3,8) under the linear transformation:

A * (3,8) = [ -39/2 40 ] [ 3 ] = [ -27 ]
            [ 41/2  5 ] [ 8 ]   [ 206 ]

Therefore, x = (-27, 206).

Learn more about matrix multiplication: https://brainly.com/question/11989522

#SPJ11

The limit you're seeking can be expressed as the definite integral ∫[1, 6] 4x^3 dx. The limit as a definite integral on the given interval: lim n→∞ Σ (i=1 to n) (xi*)(xi*)^2 * 4δx, [1, 6].

To do this, follow these steps:

1. First, recognize that this is a Riemann sum, where xi* is a point in the interval [1, 6] and δx is the width of each subinterval.
2. Convert the Riemann sum to an integral by taking the limit as n approaches infinity: lim n→∞ Σ (i=1 to n) (xi*)(xi*)^2 * 4δx = ∫[1, 6] f(x) dx.
3. The function f(x) in this case is given by the expression inside the sum, which is (x)(x^2) * 4.
4. Simplify the function: f(x) = 4x^3.
5. Now, substitute the function into the integral: ∫[1, 6] 4x^3 dx.
6. Finally, evaluate the definite integral: ∫[1, 6] 4x^3 dx.

So, the limit can be expressed as the definite integral ∫[1, 6] 4x^3 dx.

To learn more about definite integral

https://brainly.com/question/27256027

#SPJ11

After 15 years, the amount (future value) that Ajay has in his account than Rashon, to the nearest dollar, is $391.

The future values of both investments can be determined using an online finance calculator, using their different formulas for continuous compounding and annual compounding.

Using the formula for future value = Pe^rt

Principal (P): $98,000.00

Annual Rate (R): 2%

Time (t in years): 15 years

Compound (n): Compounding Continuously

Ajay's future value = $132,286.16

A = P + I where

P (principal) = $98,000.00

I (interest) = $34,286.16

Using the formula for future value = P(1 + r/n)^nt

Principal (P): $98,000.00

Annual Rate (R): 2%

Compound (n): Compounding Annually

Time (t in years): 15 years

Rashon's future value = $131,895.10

A = P + I where

P (principal) = $98,000.00

I (interest) = $33,895.10

Ajay's future value = $132,286.16

Rashon's future value = $131,895.10

Difference = $391.06 ($132,286.16 - $131,895.10)

Learn more about the future value at https://brainly.com/question/24703884.

#SPJ1

The domain of the function is (-∞, ∞).

Option D is the correct answer.

We have,

From the graph,

The domain is the x-values.

So,

The function in the graph has three lines.

Each line has different domain values.

Now,

First line.

Domain = (-∞, -1]

Second line.

Domain = [-1, 1]

Third line.

Domain = [1, ∞]

Now,

We combine all the domains.

So,

= (-∞, -1] U {-1, 1} U [1, ∞)

= (-∞, ∞)

Thus,

The domain of the function is (-∞, ∞).

Learn more about functions here:

https://brainly.com/question/28533782

#SPJ1

The series `[tex]\sigma[/tex][tex]a_n[/tex]` is divergent.

We can start by finding a formula for the general term `[tex]a_n[/tex]`:

[tex]a_1 = 7\\a_2 = 5(2) + 2/(3)(7) = 10 + 2/21\\a_3 = 5(3) + 2/(3)(a_2 + 9) = 15 + 2/(3)(a_2 + 9)\\a_4 = 5(4) + 2/(3)(a_3 + 9) = 20 + 2/(3)(a_3 + 9)\\[/tex]

And so on...

It seems difficult to find an explicit formula for `[tex]a_n[/tex]`, so we'll have to try another method to determine the convergence/divergence of the series.

Let's try the ratio test:

[tex]lim_{n\rightarrow \infty} |a_{n+1}/a_n|\\= lim_{n\rightarrow \infty}} |(5(n+1) + 2/(3(n+1) + 9))/(5n + 2/(3n + 9))|\\= lim_{n\rightarrow \infty}} |(5n + 17)/(5n + 16)|\\= 5/5 = 1[/tex]

Since the limit is equal to 1, the ratio test is inconclusive. We'll have to try another method.

Let's try the comparison test. Notice that

[tex]a_n > = 5n[/tex]  (for n >= 2)

Therefore, we have

[tex]\sigma |a_n|[/tex]>= [tex]\sigma[/tex] (5n) =[tex]\infty[/tex]

Since the series of `5n` diverges, the series of `[tex]a_n[/tex]` must also diverge. Therefore, the series `[tex]\sigma[/tex][tex]a_n[/tex]` is divergent.

In conclusion, the series `[tex]\sigma[/tex][tex]a_n[/tex]` is divergent.

Learn more about series convergence or divergence

brainly.com/question/12429779

#SPJ11

An equation of the line in fully simplified slope-intercept form is y = -5x - 2

In Mathematics and Geometry, the point-slope form of a straight line can be calculated by using the following mathematical expression:

y - y₁ = m(x - x₁)

Where:

First of all, we would determine the slope of this line;

Slope (m) = (y₂ - y₁)/(x₂ - x₁)

Slope (m) = (3 - 8)/(-1 + 2)

Slope (m) = -5/1

Slope (m) = -5.

At data point (-1, 3) and a slope of -5, a linear equation for this line can be calculated by using the point-slope form as follows:

y - y₁ = m(x - x₁)

y - 3 = -5(x + 1)

y = -5x - 5 + 3

y = -5x - 2

Read more on point-slope here: brainly.com/question/24907633

#SPJ1

To minimize the function f(x, y) = x^2 + y^2 under the constraint -6x - 8y + 25 = 0, we can use the method of Lagrange multipliers. The Lagrange multiplier method involves introducing a new variable λ and forming the Lagrangian function:
L(x, y, λ) = f(x, y) - λ(g(x, y) - c)

Here, g(x, y) represents the constraint, and c is a constant. In this case, g(x, y) = -6x - 8y and c = 25.
L(x, y, λ) = x^2 + y^2 - λ(-6x - 8y + 25)
Now, we find the partial derivatives of L with respect to x, y, and λ, and set them equal to 0:
∂L/∂x = 2x + 6λ = 0
∂L/∂y = 2y + 8λ = 0
∂L/∂λ = -6x - 8y + 25 = 0
Solving the first two equations for x and y, we have:
x = -3λ
y = -4λ
Substituting these values into the third equation, we get:
-18λ - 32λ + 25 = 0
-50λ = -25
λ = 1/2
Now, substituting λ back into the expressions for x and y, we obtain:
x = -3(1/2) = -3/2
y = -4(1/2) = -2
However, the problem states that x and y are positive, so there is no minimum for f(x, y) under the given constraint with positive x and y values.

Learn more about variable here

https://brainly.com/question/28248724

#SPJ11

To prove the conjecture made in part (a), we need to show that the given function f(x) = sin(3x) sin(x) − cos(3x) cos(x) can be simplified using trigonometric identities to obtain a simpler expression that is equivalent to f(x).

First, we can use the product-to-sum identity to rewrite f(x) as follows:

f(x) = [sin(3x) sin(x)] - [cos(3x) cos(x)]
= 1/2 [(cos(2x) - cos(4x))] - 1/2 [(cos(4x) + cos(2x))]
= 1/2 [-2 cos(4x)]

Next, we can use the identity cos(2x) = 2 cos^2(x) - 1 and cos(4x) = 2 cos^2(2x) - 1 to simplify the expression further:

f(x) = 1/2 [-2 cos(4x)]
= -cos(4x)
= -2 cos^2(2x) + 1
= -2 [2 cos^2(x) - 1]^2 + 1

Thus, we have simplified the original expression to obtain an equivalent expression that is much simpler. Hence, we have proven the conjecture made in part (a) that the function f(x) = sin(3x) sin(x) − cos(3x) cos(x) can be simplified to f(x) = -2 [2 cos^2(x) - 1]^2 + 1.

Learn more about trigonometric identities here:

https://brainly.com/question/3785172

#SPJ11

We need more information about the lengths of the other two sides of the triangle to determine whether Andre or Mai is correct. Without this information, we cannot agree with either of them.

Given that Andre and Mai are discussing the third side of a triangle ABC and Andre thinks that the length of the third side is 5 units, whereas Mai disagrees and thinks that the side length is unknown.To check whether Andre is correct or Mai, we need to apply the triangle inequality theorem.The triangle inequality theorem states that the sum of the lengths of any two sides of a triangle must be greater than the third side. In other words, c < a + b, where c is the length of the longest side (also known as the hypotenuse) and a and b are the lengths of the other two sides. If c is greater than or equal to a + b, then the three sides cannot form a triangle.

Now, let's assume that sides AB, AC, and BC have lengths a, b, and c, respectively. Then, we can represent the triangle inequality theorem for these sides as c < a + b, a < b + c, and b < a + c.Now, let's compare the given side length of 5 units with the sum of the other two sides. If the sum of the other two sides is greater than 5, then Andre is right, and if it is less than 5, then Mai is right. However, if the sum of the other two sides is equal to 5, then either Andre or Mai could be right (since it is a degenerate triangle).

Therefore, we can conclude that we need more information about the lengths of the other two sides of the triangle to determine whether Andre or Mai is correct. Without this information, we cannot agree with either of them.

Learn more about triangle here,

https://brainly.com/question/30104125

#SPJ11

The probability of X being less than 14 is essentially zero. This makes sense since the mean of X is 105 and the standard deviation is likely to be quite large given that δ1^2 = ... = δ7^2.

Since X1, …, X7 are independent normal random variables with xi distributed as N(µi, δ^2) for i = 1,...,7, we can say that X ~ N(µ, δ^2), where µ = µ1 + µ2 + ... + µ7 and δ^2 = δ1^2 + δ2^2 + ... + δ7^2.

Thus, we have X ~ N(105, 7δ^2). To find p(X < 14), we need to standardize X as follows

Z = (X - µ) / δ = (14 - 105) / sqrt(7δ^2) = -91 / sqrt(7δ^2)

Now, we need to find the probability that Z is less than this value. Using a standard normal table or calculator, we get:

p(Z < -91 / sqrt(7δ^2)) = 0

To learn more about Probability :

https://brainly.com/question/24756209

#SPJ11

The probability of getting a sample mean less than 14 is approximately 0.004 when the Xi's are independent normal random variables with µ1 = … = µ7 = 15 and δ1^2 = … = δ72.

To find p(x<14), we need to standardize the distribution by subtracting the mean and dividing by the standard deviation.

Let Y = (X1 + X2 + X3 + X4 + X5 + X6 + X7)/7 be the sample mean.
Since the Xi's are independent, the mean and variance of Y are:
E(Y) = (E(X1) + E(X2) + E(X3) + E(X4) + E(X5) + E(X6) + E(X7))/7 = (µ1 + µ2 + µ3 + µ4 + µ5 + µ6 + µ7)/7 = 15
Var(Y) = Var((X1 + X2 + X3 + X4 + X5 + X6 + X7)/7) = (1/7^2) * (Var(X1) + Var(X2) + Var(X3) + Var(X4) + Var(X5) + Var(X6) + Var(X7)) = δ^2

Thus, Y ~ N(15, δ^2/7)

To standardize Y, we compute:
Z = (Y - E(Y))/sqrt(Var(Y)) = (Y - 15)/sqrt(δ^2/7)

We can then compute p(Y < 14) as:
p(Y < 14) = p(Z < (14 - 15)/sqrt(δ^2/7)) = p(Z < -sqrt(7)/δ)

Using a standard normal table, we can find that p(Z < -sqrt(7)/δ) = 0.0035, or approximately 0.004 when rounded off to two decimal places. Therefore, the probability of getting a sample mean less than 14 is approximately 0.004 when the Xi's are independent normal random variables with µ1 = … = µ7 = 15 and δ1^2 = … = δ72.

Visit here to learn more about standard deviation:

brainly.com/question/23907081

#SPJ11

Answer:

The outlier is 96.

Mean is 44.7.

Mode is 40.

Median is 40.

Range is 69.

This is with outlier.

Without outlier:

Mean is 39.

Mode is 40.

Median is 40.

Range is 25.

Step-by-step explanation:

Removing the outlier only really effects the Mean. The Mode is not affected. The Median is also not affected.

(a) The distribution of e^(-X/13) is an exponential distribution with parameter λ = 1/13.

To see this, note that if Y = e^(-X/13), then the cumulative distribution function of Y is given by F_Y(y) = P(Y ≤ y) = P(e^(-X/13) ≤ y) = P(-X/13 ≤ ln(y)) = F_X(-13 ln(y)), where F_X is the cumulative distribution function of X.

Since X has a density function f_X(x) = 3x^2/150 e^(-23x/13)I_{x>0}, we have F_X(x) = (1 - e^(-23x/13))(I_{x>0}), and so F_Y(y) = (1 - e^(23 ln(y)/13))(I_{y>0}) = (1 - y^(23/13))(I_{y>0}), which is the cumulative distribution function of an exponential distribution with parameter λ = 1/13.

(b) The distribution of Q = X_1 + X_2 + X_3 is a gamma distribution with parameters α = 3 and β = 150/23.

To see this, note that the joint density function of X_1, X_2, and X_3 is given by f(x_1, x_2, x_3) = (3/150)^3 x_1^2 x_2^2 x_3^2 e^(-23/13(x_1 + x_2 + x_3))I_{x_1>0, x_2>0, x_3>0}.

Integrating out x_1 and x_2 gives the marginal density function of X_3, which is f_X3(x_3) = (3/150)^3 x_3^2 e^(-23/13 x_3)I_{x_3>0}, which is the density function of a gamma distribution with parameters α = 3 and β = 150/23. Therefore, Q = X_1 + X_2 + X_3 has a gamma distribution with parameters α = 3 and β = 150/23.

(c) Using the given observation x = 480, we can construct a 96% confidence interval for the parameter θ using the formula (x ± z_{α/2} σ /sqrt(n)), where z_{α/2} is the 96/2 = 48th percentile of the standard normal distribution, σ^2 = Var(X_1) = 150/23^2, and n = 3 is the sample size.

Using a table of the standard normal distribution, we find z_{α/2} = 1.75. Therefore, the 96% confidence interval for θ is (480 - 1.75(150/23)/sqrt(3), 480 + 1.75(150/23)/sqrt(3)) = (368.7, 591.3).

For more questions like Function click the link below:

https://brainly.com/question/16008229

#SPJ11

The derivative of the function [tex]g(x) = ∫[1, x^3] t^3 dt is g'(x) = (3/4) x^11.[/tex]

To find the derivative of the function [tex]g(x) = ∫[1, x^3] t^3[/tex]dt using the Fundamental Theorem of Calculus, we can apply Part 1 of the theorem, which states that if the function g(x) is defined as the integral of a function f(t), then its derivative g'(x) can be found by evaluating f(x) at the upper limit of integration and multiplying it by the derivative of the upper limit.

In this case, the upper limit of integration is[tex]x^3[/tex], so we have:

[tex]g'(x) = d/dx ∫[1, x^3] t^3 dt[/tex]

Using the power rule for integration, we can integrate [tex]t^3[/tex] to obtain (1/4) [tex]t^4[/tex]. Applying the Fundamental Theorem of Calculus, we have:

[tex]g'(x) = d/dx [(1/4) (x^3)^4][/tex]

Simplifying, we get:

[tex]g'(x) = d/dx [(1/4) x^12][/tex]

Taking the derivative using the power rule, we have:

[tex]g'(x) = (1/4) * 12x^(12-1)g'(x) = (3/4) x^11[/tex]

Therefore, the derivative of the function [tex]g(x) = ∫[1, x^3] t^3 dt is g'(x) = (3/4) x^11.[/tex]

To know more about derivative refer to-

https://brainly.com/question/30365299

#SPJ11

The variables "era" and "number of wins" are both quantitative variables.

This matters because quantitative variables have numerical values that can be compared and analyzed, while categorical variables are descriptive and non-numerical.

Quantitative variables, such as era and number of wins, have numerical values that can be subjected to mathematical operations and statistical analysis. This distinction is important because it determines the appropriate methods and techniques for data analysis.

For example, with quantitative variables, you can calculate the mean, median, or mode, as well as perform regression analysis or correlation tests. In contrast, categorical variables are analyzed using different methods, such as frequency tables or chi-square tests.

Understanding the difference between quantitative and categorical variables is essential for correctly interpreting data and making informed decisions based on the results of the analysis.

To know more about regression analysis click on below link:

https://brainly.com/question/30011167#

#SPJ11

The time taken by the object to reach the highest point is 0.91 seconds.

The given equation for the function h (t) = − 16t² + 29t + 6683 gives the height of an object that is thrown upward from the top of the mountain at an initial upward velocity of 29 feet per second.
To determine the time taken by the object to reach the highest point, we need to find the vertex of the function h (t). The vertex of a quadratic function is given by (-b/2a, f(-b/2a)) where a, b, c are coefficients of the quadratic equation ax² + bx + c = 0. In the given function h (t) = − 16t² + 29t + 6683, we have a = -16, b = 29, and c = 6683.

Therefore, the time taken by the object to reach the highest point is 0.91 seconds

To know more about quadratic equation, click here

https://brainly.com/question/18958913

#SPJ11

Pi is an irrational number, for those that don't know, with its decimals going on and on without repeating. However, did you know that you can make a story out of its digits?

Below is a story using the decimals of pi from 3.141 to 3.1415926.The sun was high up in the sky, With a gentle breeze blowing by. The birds flew off into the blue, And suddenly a pie came into view. Beneath its crust was something nice, Apples, berries, and some spice.

A cup of tea would be just right, To sit and eat this summer delight! So come and join me if you can, For an afternoon that's quite grand! We will sit and chat away, As we enjoy this pie today!

Know more about Pi is an irrational number here:

https://brainly.com/question/11305198

#SPJ11

To prove that a group of order 63 must have an element of order 3, we can use the Sylow theorems.

First, we know that 63=3^2*7, so the number of Sylow 3-subgroups is either 1 or 7. If there is only one Sylow 3-subgroup, then it is normal and we are done, since it contains an element of order 3.
If there are 7 Sylow 3-subgroups, then each contains 2 elements of order 3 (since the only elements of order 1 are the identity, and the only elements of order 2 must be in the Sylow 2-subgroup, which has order 2^3=8, not 63). Therefore, we have at least 14 elements of order 3.
But we know that the identity element is one of these elements, so there are at least 13 non-identity elements of order 3. Moreover, any two distinct Sylow 3-subgroups intersect trivially, so these 13 non-identity elements must be distinct.
Therefore, the group of order 63 must have an element of order 3.

To know more about Sylow Theorems visit:
https://brainly.com/question/27901568
#SPJ11

False. The best line is the least squares line because it minimizes the sum of squared errors (SSE). This means that the least squares line provides the best fit for the data by minimizing the difference between observed and predicted values.

The least squares line is actually the line that has the smallest sum of squares error (SSE) is incorrect.

Know more about the least squares line

https://brainly.com/question/14563186

#SPJ11

When x = 90, ΔC = $5.31 and C'(x) = 2.2.
Given the total-cost function C(x) = 0.01x^2 + 0.4x + 50, we'll first find the change in cost (ΔC) and then the derivative of the cost function (C'(x)) when x = 90 and Δx = 1.

To find ΔC when x = 90 and ΔΧΖ = 1, we need to use the formula:
ΔC = C(x + ΔΧΖ) - C(x)
Substituting the values, we get:
ΔC = C(90 + 1) - C(90)
ΔC = C(91) - C(90)
ΔC = [0.01(91)^2 + 0.4(91) + 50] - [0.01(90)^2 + 0.4(90) + 50]
ΔC = 91.31 - 86
ΔC = $5.31
To find C'(x), we need to take the derivative of the total-cost function C(x):
C(x) = 0.01x^2 + 0.4x + 50
C'(x) = 0.02x + 0.4
Substituting x = 90, we get:
C'(90) = 0.02(90) + 0.4
C'(90) = 1.8 + 0.4
C'(90) = 2.2
Therefore, when x = 90, ΔC = $5.31 and C'(x) = 2.2.
Given the total-cost function C(x) = 0.01x^2 + 0.4x + 50, we'll first find the change in cost (ΔC) and then the derivative of the cost function (C'(x)) when x = 90 and Δx = 1.
1. To find ΔC, evaluate C(x + Δx) - C(x) when x = 90 and Δx = 1:
ΔC = C(90 + 1) - C(90) = C(91) - C(90)
2. Now, let's find the derivative of the cost function C(x):
C'(x) = d(0.01x^2 + 0.4x + 50)/dx = 0.02x + 0.4
3. Evaluate C'(x) when x = 90:
C'(90) = 0.02(90) + 0.4 = 1.8 + 0.4 = 2.2
So, ΔC = C(91) - C(90), and C'(x) when x = 90 is 2.2.

To know more about total-cost function visit:

https://brainly.com/question/29262808

#SPJ11

The correct statement regarding the range and the standard deviation of the data-sets is given as follows:

The east traffic light has a greater range, while the west traffic light has a greater standard deviation.

The range of a data-set is given by the difference of the largest value in the data-set by the smallest value, hence the east traffic light has a greater range.

The standard deviation gives how much the distribution varies around the mean, that is, it is the square root of the sum of the differences squared between each observation and the mean, divided by the cardinality of the data-set.

Due to the higher height of the graph, the west traffic light has a greater standard deviation.

More can be learned about range and standard deviation at https://brainly.com/question/28383764

#SPJ1

Answer:T

Step-by-step explanation:

Thus, parametric equation for the circumference of the ellipse : C ≈ 15.3.

To estimate the circumference of the ellipse given by the equation 16x^2 + 4y^2 = 64, we first need to find the parametric equations. Let's divide both sides of the equation by 64 to get:
x^2 / 4^2 + y^2 / 2^2 = 1

Now, we can use the parametric equations for an ellipse:
x = 4 * cos(t)
y = 2 * sin(t)

Now, we can find the arc length function ds/dt. To do this, we'll differentiate both equations with respect to t and then use the Pythagorean theorem:

dx/dt = -4 * sin(t)
dy/dt = 2 * cos(t)

(ds/dt)^2 = (dx/dt)^2 + (dy/dt)^2 = (-4 * sin(t))^2 + (2 * cos(t))^2

Now, find ds/dt:
ds/dt = √(16 * sin^2(t) + 4 * cos^2(t))

Now we can use Simpson's rule with n = 8 to estimate the circumference:
C ≈ (1/4)[(ds/dt)|t = 0 + 4(ds/dt)|t=(1/8)π + 2(ds/dt)|t=(1/4)π + 4(ds/dt)|t=(3/8)π + (ds/dt)|t=π/2] * (2π/8)

After plugging in the values for ds/dt and evaluating the expression, we find:
C ≈ 15.3 (rounded to one decimal place)

Know more about the parametric equation

https://brainly.com/question/30451972

#SPJ11

The solution to the given equation is solved using the operation known as PEMDAS and the value of 1x2-(6/3) -9x +6 is -48.

Ready to disentangle the cleared outside of the condition utilizing the arrange of operations (too known as PEMDAS) as takes after:

PEMDAS is an acronym utilized to keep in mind the arrangement of operations in math:

Enclosures, Types, Duplication, and Division (from cleared out to right), and Expansion and Subtraction (from cleared out to right).

It makes a difference to fathom numerical expressions reliably and precisely.

1 x 2 - (6/3) - 9 x 6 + 6

= 2 - 2 - 54 + 6 (since 6/3 = 2)

= -48

Hence, the reply to the condition 1x2-(6/3) -9x +6 is -48. 

To know more about PEMDAS refer to this :

https://brainly.com/question/11421179

#SPJ1

The determinant of an elementary matrix of this form is always equal to 1. Therefore, the determinant of this matrix is 1.

A single elementary row operation on the identity matrix yields a square matrix known as an elementary matrix. Simple row operations include adding a multiple of one row to another row and multiplying a row by a non-zero scalar. The resulting matrix is still invertible, and the opposite elementary row operation can be used to create the inverse of the identity matrix. In linear algebra, elementary matrices are used to describe and work with systems of linear equations. They also offer a practical method for computing determinants and resolving matrix equations. Additionally, they are used in encryption and computer graphics.

Learn more about elementary matrix here:
https://brainly.com/question/31775741

#SPJ11

No, Green's theorem cannot be applied to the given line integral -5x dx + 3y dy / (x² + y⁴) over the unit circle x² + y² = 1, because C is not positively oriented.

In order to apply Green's theorem, the curve must be a simple, closed, and positively oriented boundary of a region with a piecewise smooth boundary, and the vector field must have continuous partial derivatives in the region enclosed by the curve.

In this case, while the unit circle is a simple and closed curve with a smooth boundary, it is not positively oriented since the orientation is counterclockwise, whereas the standard orientation is clockwise.

Therefore, we cannot apply Green's theorem to this line integral.

To know more about Green's theorem refer to-

https://brainly.com/question/30763441

#SPJ11

To determine if a compound proposition is satisfiable, we need to check if there exists an assignment of truth values to the propositional variables that makes the entire proposition true. In (a), we can see that all five clauses have at least one occurrence of variable p. Therefore, p must be true for the entire proposition to be true. If we set p=true, we can then satisfy the first three clauses by setting q=true and r=false. Then we can satisfy the fourth clause by setting s=false. Finally, the fifth clause is already satisfied since p and q are true and r is false. Therefore, (a) is satisfiable. In (b), we can see that each clause has at least one occurrence of either p or ¬p. Therefore, (b) is also satisfiable.

To determine if a compound proposition is satisfiable, we need to check if there exists an assignment of truth values to the propositional variables that makes the entire proposition true. In (a), we can see that all five clauses have at least one occurrence of variable p. Therefore, p must be true for the entire proposition to be true. Then, we can examine the other variables and determine if we can satisfy each clause with a combination of true and false assignments. We can do this by starting with the first clause and finding values that make it true, then moving on to the next clause and so on. In (b), we can use the same method by examining the clauses and finding values that satisfy each one.

In conclusion, both compound propositions (a) and (b) are satisfiable. We can satisfy them by assigning truth values to the propositional variables in a way that makes each clause true. In (a), we need p=true, q=true, r=false, and s=false. In (b), we need p=true, q=false, r=true, and s=false.

To know more about compound proposition visit:

https://brainly.com/question/29807596

#SPJ11